linux/drivers/crypto/qat/qat_common/adf_init.c

385 lines
11 KiB
C
Raw Normal View History

/*
This file is provided under a dual BSD/GPLv2 license. When using or
redistributing this file, you may do so under either license.
GPL LICENSE SUMMARY
Copyright(c) 2014 Intel Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of version 2 of the GNU General Public License as
published by the Free Software Foundation.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
Contact Information:
qat-linux@intel.com
BSD LICENSE
Copyright(c) 2014 Intel Corporation.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include "adf_accel_devices.h"
#include "adf_cfg.h"
#include "adf_common_drv.h"
static LIST_HEAD(service_table);
static DEFINE_MUTEX(service_lock);
static void adf_service_add(struct service_hndl *service)
{
mutex_lock(&service_lock);
list_add(&service->list, &service_table);
mutex_unlock(&service_lock);
}
int adf_service_register(struct service_hndl *service)
{
memset(service->init_status, 0, sizeof(service->init_status));
memset(service->start_status, 0, sizeof(service->start_status));
adf_service_add(service);
return 0;
}
static void adf_service_remove(struct service_hndl *service)
{
mutex_lock(&service_lock);
list_del(&service->list);
mutex_unlock(&service_lock);
}
int adf_service_unregister(struct service_hndl *service)
{
int i;
for (i = 0; i < ARRAY_SIZE(service->init_status); i++) {
if (service->init_status[i] || service->start_status[i]) {
pr_err("QAT: Could not remove active service\n");
return -EFAULT;
}
}
adf_service_remove(service);
return 0;
}
/**
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
* adf_dev_init() - Init data structures and services for the given accel device
* @accel_dev: Pointer to acceleration device.
*
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
* Initialize the ring data structures and the admin comms and arbitration
* services.
*
* Return: 0 on success, error code otherwise.
*/
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
int adf_dev_init(struct adf_accel_dev *accel_dev)
{
struct service_hndl *service;
struct list_head *list_itr;
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
if (!hw_data) {
dev_err(&GET_DEV(accel_dev),
"Failed to init device - hw_data not set\n");
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
return -EFAULT;
}
if (!test_bit(ADF_STATUS_CONFIGURED, &accel_dev->status)) {
dev_err(&GET_DEV(accel_dev), "Device not configured\n");
return -EFAULT;
}
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
if (adf_init_etr_data(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed initialize etr\n");
return -EFAULT;
}
if (hw_data->init_admin_comms && hw_data->init_admin_comms(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed initialize admin comms\n");
return -EFAULT;
}
if (hw_data->init_arb && hw_data->init_arb(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed initialize hw arbiter\n");
return -EFAULT;
}
hw_data->enable_ints(accel_dev);
if (adf_ae_init(accel_dev)) {
dev_err(&GET_DEV(accel_dev),
"Failed to initialise Acceleration Engine\n");
return -EFAULT;
}
set_bit(ADF_STATUS_AE_INITIALISED, &accel_dev->status);
if (adf_ae_fw_load(accel_dev)) {
dev_err(&GET_DEV(accel_dev),
"Failed to load acceleration FW\n");
return -EFAULT;
}
set_bit(ADF_STATUS_AE_UCODE_LOADED, &accel_dev->status);
if (hw_data->alloc_irq(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed to allocate interrupts\n");
return -EFAULT;
}
set_bit(ADF_STATUS_IRQ_ALLOCATED, &accel_dev->status);
/*
* Subservice initialisation is divided into two stages: init and start.
* This is to facilitate any ordering dependencies between services
* prior to starting any of the accelerators.
*/
list_for_each(list_itr, &service_table) {
service = list_entry(list_itr, struct service_hndl, list);
if (service->event_hld(accel_dev, ADF_EVENT_INIT)) {
dev_err(&GET_DEV(accel_dev),
"Failed to initialise service %s\n",
service->name);
return -EFAULT;
}
set_bit(accel_dev->accel_id, service->init_status);
}
hw_data->enable_error_correction(accel_dev);
hw_data->enable_vf2pf_comms(accel_dev);
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
return 0;
}
EXPORT_SYMBOL_GPL(adf_dev_init);
/**
* adf_dev_start() - Start acceleration service for the given accel device
* @accel_dev: Pointer to acceleration device.
*
* Function notifies all the registered services that the acceleration device
* is ready to be used.
* To be used by QAT device specific drivers.
*
* Return: 0 on success, error code otherwise.
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
*/
int adf_dev_start(struct adf_accel_dev *accel_dev)
{
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
struct service_hndl *service;
struct list_head *list_itr;
set_bit(ADF_STATUS_STARTING, &accel_dev->status);
if (adf_ae_start(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "AE Start Failed\n");
return -EFAULT;
}
set_bit(ADF_STATUS_AE_STARTED, &accel_dev->status);
if (hw_data->send_admin_init(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed to send init message\n");
return -EFAULT;
}
list_for_each(list_itr, &service_table) {
service = list_entry(list_itr, struct service_hndl, list);
if (service->event_hld(accel_dev, ADF_EVENT_START)) {
dev_err(&GET_DEV(accel_dev),
"Failed to start service %s\n",
service->name);
return -EFAULT;
}
set_bit(accel_dev->accel_id, service->start_status);
}
clear_bit(ADF_STATUS_STARTING, &accel_dev->status);
set_bit(ADF_STATUS_STARTED, &accel_dev->status);
if (!list_empty(&accel_dev->crypto_list) &&
(qat_algs_register() || qat_asym_algs_register())) {
dev_err(&GET_DEV(accel_dev),
"Failed to register crypto algs\n");
set_bit(ADF_STATUS_STARTING, &accel_dev->status);
clear_bit(ADF_STATUS_STARTED, &accel_dev->status);
return -EFAULT;
}
return 0;
}
EXPORT_SYMBOL_GPL(adf_dev_start);
/**
* adf_dev_stop() - Stop acceleration service for the given accel device
* @accel_dev: Pointer to acceleration device.
*
* Function notifies all the registered services that the acceleration device
* is shuting down.
* To be used by QAT device specific drivers.
*
* Return: void
*/
void adf_dev_stop(struct adf_accel_dev *accel_dev)
{
struct service_hndl *service;
struct list_head *list_itr;
bool wait = false;
int ret;
if (!adf_dev_started(accel_dev) &&
!test_bit(ADF_STATUS_STARTING, &accel_dev->status))
return;
clear_bit(ADF_STATUS_STARTING, &accel_dev->status);
clear_bit(ADF_STATUS_STARTED, &accel_dev->status);
if (!list_empty(&accel_dev->crypto_list)) {
qat_algs_unregister();
qat_asym_algs_unregister();
}
list_for_each(list_itr, &service_table) {
service = list_entry(list_itr, struct service_hndl, list);
if (!test_bit(accel_dev->accel_id, service->start_status))
continue;
ret = service->event_hld(accel_dev, ADF_EVENT_STOP);
if (!ret) {
clear_bit(accel_dev->accel_id, service->start_status);
} else if (ret == -EAGAIN) {
wait = true;
clear_bit(accel_dev->accel_id, service->start_status);
}
}
if (wait)
msleep(100);
if (test_bit(ADF_STATUS_AE_STARTED, &accel_dev->status)) {
if (adf_ae_stop(accel_dev))
dev_err(&GET_DEV(accel_dev), "failed to stop AE\n");
else
clear_bit(ADF_STATUS_AE_STARTED, &accel_dev->status);
}
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
}
EXPORT_SYMBOL_GPL(adf_dev_stop);
/**
* adf_dev_shutdown() - shutdown acceleration services and data strucutures
* @accel_dev: Pointer to acceleration device
*
* Cleanup the ring data structures and the admin comms and arbitration
* services.
*/
void adf_dev_shutdown(struct adf_accel_dev *accel_dev)
{
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
struct service_hndl *service;
struct list_head *list_itr;
if (!hw_data) {
dev_err(&GET_DEV(accel_dev),
"QAT: Failed to shutdown device - hw_data not set\n");
return;
}
if (test_bit(ADF_STATUS_AE_UCODE_LOADED, &accel_dev->status)) {
adf_ae_fw_release(accel_dev);
clear_bit(ADF_STATUS_AE_UCODE_LOADED, &accel_dev->status);
}
if (test_bit(ADF_STATUS_AE_INITIALISED, &accel_dev->status)) {
if (adf_ae_shutdown(accel_dev))
dev_err(&GET_DEV(accel_dev),
"Failed to shutdown Accel Engine\n");
else
clear_bit(ADF_STATUS_AE_INITIALISED,
&accel_dev->status);
}
list_for_each(list_itr, &service_table) {
service = list_entry(list_itr, struct service_hndl, list);
if (!test_bit(accel_dev->accel_id, service->init_status))
continue;
if (service->event_hld(accel_dev, ADF_EVENT_SHUTDOWN))
dev_err(&GET_DEV(accel_dev),
"Failed to shutdown service %s\n",
service->name);
else
clear_bit(accel_dev->accel_id, service->init_status);
}
hw_data->disable_iov(accel_dev);
if (test_bit(ADF_STATUS_IRQ_ALLOCATED, &accel_dev->status)) {
hw_data->free_irq(accel_dev);
clear_bit(ADF_STATUS_IRQ_ALLOCATED, &accel_dev->status);
}
/* Delete configuration only if not restarting */
if (!test_bit(ADF_STATUS_RESTARTING, &accel_dev->status))
adf_cfg_del_all(accel_dev);
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
if (hw_data->exit_arb)
hw_data->exit_arb(accel_dev);
if (hw_data->exit_admin_comms)
hw_data->exit_admin_comms(accel_dev);
adf_cleanup_etr_data(accel_dev);
adf_dev_restore(accel_dev);
}
crypto: qat - fix device reset flow When the device needs a reset, e.g. when an uncorrectable PCIe AER event occurs, various services/data structures need to be cleaned up, the hardware reset and the services/data structures initialized and started. The code to perform the cleanup and initialization was not performed when a device reset was done. This patch moves some of the initialization code out of the .probe entry- point into a separate function that is now called during probe as well as after the hardware has been reset. Similarly, a new function is added for first cleaning up these services/data structures prior to resetting. The new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for which there are already prototypes but no actual functions just yet and are now called when the device is reset and during probe/cleanup of the driver. The down and up flows via ioctl calls has similarly been updated. In addition, there are two other bugs in the reset flow - one in the logic for determining whether to schedule a device reset upon receiving an uncorrectable AER event which prevents the reset flow from being initiated, and another with clearing the status bit indicating a device is configured (when resetting the device the configuration remains across the reset so the bit should not be cleared, otherwise, the necessary services will not be re-started in adf_dev_start() after the reset - clear the bit only when actually deleting the configuration). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-10 03:54:58 +08:00
EXPORT_SYMBOL_GPL(adf_dev_shutdown);
int adf_dev_restarting_notify(struct adf_accel_dev *accel_dev)
{
struct service_hndl *service;
struct list_head *list_itr;
list_for_each(list_itr, &service_table) {
service = list_entry(list_itr, struct service_hndl, list);
if (service->event_hld(accel_dev, ADF_EVENT_RESTARTING))
dev_err(&GET_DEV(accel_dev),
"Failed to restart service %s.\n",
service->name);
}
return 0;
}
int adf_dev_restarted_notify(struct adf_accel_dev *accel_dev)
{
struct service_hndl *service;
struct list_head *list_itr;
list_for_each(list_itr, &service_table) {
service = list_entry(list_itr, struct service_hndl, list);
if (service->event_hld(accel_dev, ADF_EVENT_RESTARTED))
dev_err(&GET_DEV(accel_dev),
"Failed to restart service %s.\n",
service->name);
}
return 0;
}