linux/drivers/input/mouse/psmouse.h

250 lines
7.3 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _PSMOUSE_H
#define _PSMOUSE_H
#define PSMOUSE_OOB_NONE 0x00
#define PSMOUSE_OOB_EXTRA_BTNS 0x01
#define PSMOUSE_CMD_SETSCALE11 0x00e6
#define PSMOUSE_CMD_SETSCALE21 0x00e7
#define PSMOUSE_CMD_SETRES 0x10e8
#define PSMOUSE_CMD_GETINFO 0x03e9
#define PSMOUSE_CMD_SETSTREAM 0x00ea
#define PSMOUSE_CMD_SETPOLL 0x00f0
#define PSMOUSE_CMD_POLL 0x00eb /* caller sets number of bytes to receive */
#define PSMOUSE_CMD_RESET_WRAP 0x00ec
#define PSMOUSE_CMD_GETID 0x02f2
#define PSMOUSE_CMD_SETRATE 0x10f3
#define PSMOUSE_CMD_ENABLE 0x00f4
#define PSMOUSE_CMD_DISABLE 0x00f5
#define PSMOUSE_CMD_RESET_DIS 0x00f6
#define PSMOUSE_CMD_RESET_BAT 0x02ff
#define PSMOUSE_RET_BAT 0xaa
#define PSMOUSE_RET_ID 0x00
#define PSMOUSE_RET_ACK 0xfa
#define PSMOUSE_RET_NAK 0xfe
enum psmouse_state {
PSMOUSE_IGNORE,
PSMOUSE_INITIALIZING,
PSMOUSE_RESYNCING,
PSMOUSE_CMD_MODE,
PSMOUSE_ACTIVATED,
};
/* psmouse protocol handler return codes */
typedef enum {
PSMOUSE_BAD_DATA,
PSMOUSE_GOOD_DATA,
PSMOUSE_FULL_PACKET
} psmouse_ret_t;
enum psmouse_scale {
PSMOUSE_SCALE11,
PSMOUSE_SCALE21
};
enum psmouse_type {
PSMOUSE_NONE,
PSMOUSE_PS2,
PSMOUSE_PS2PP,
PSMOUSE_THINKPS,
PSMOUSE_GENPS,
PSMOUSE_IMPS,
PSMOUSE_IMEX,
PSMOUSE_SYNAPTICS,
PSMOUSE_ALPS,
PSMOUSE_LIFEBOOK,
PSMOUSE_TRACKPOINT,
PSMOUSE_TOUCHKIT_PS2,
PSMOUSE_CORTRON,
PSMOUSE_HGPK,
PSMOUSE_ELANTECH,
PSMOUSE_FSP,
PSMOUSE_SYNAPTICS_RELATIVE,
PSMOUSE_CYPRESS,
PSMOUSE_FOCALTECH,
PSMOUSE_VMMOUSE,
PSMOUSE_BYD,
PSMOUSE_SYNAPTICS_SMBUS,
PSMOUSE_ELANTECH_SMBUS,
PSMOUSE_AUTO /* This one should always be last */
};
struct psmouse;
struct psmouse_protocol {
enum psmouse_type type;
bool maxproto;
bool ignore_parity; /* Protocol should ignore parity errors from KBC */
bool try_passthru; /* Try protocol also on passthrough ports */
bool smbus_companion; /* "Protocol" is a stub, device is on SMBus */
const char *name;
const char *alias;
int (*detect)(struct psmouse *, bool);
int (*init)(struct psmouse *);
};
struct psmouse {
void *private;
struct input_dev *dev;
struct ps2dev ps2dev;
struct delayed_work resync_work;
const char *vendor;
const char *name;
const struct psmouse_protocol *protocol;
unsigned char packet[8];
unsigned char badbyte;
unsigned char pktcnt;
unsigned char pktsize;
unsigned char oob_data_type;
unsigned char extra_buttons;
bool acks_disable_command;
unsigned int model;
unsigned long last;
unsigned long out_of_sync_cnt;
unsigned long num_resyncs;
enum psmouse_state state;
char devname[64];
char phys[32];
unsigned int rate;
unsigned int resolution;
unsigned int resetafter;
unsigned int resync_time;
bool smartscroll; /* Logitech only */
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
psmouse_ret_t (*protocol_handler)(struct psmouse *psmouse);
void (*set_rate)(struct psmouse *psmouse, unsigned int rate);
void (*set_resolution)(struct psmouse *psmouse, unsigned int resolution);
void (*set_scale)(struct psmouse *psmouse, enum psmouse_scale scale);
int (*reconnect)(struct psmouse *psmouse);
int (*fast_reconnect)(struct psmouse *psmouse);
void (*disconnect)(struct psmouse *psmouse);
void (*cleanup)(struct psmouse *psmouse);
int (*poll)(struct psmouse *psmouse);
void (*pt_activate)(struct psmouse *psmouse);
void (*pt_deactivate)(struct psmouse *psmouse);
};
void psmouse_queue_work(struct psmouse *psmouse, struct delayed_work *work,
unsigned long delay);
int psmouse_reset(struct psmouse *psmouse);
void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state);
void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
Input: synaptics - add support for Relative mode Currently, the synaptics driver puts the device into Absolute mode. As explained in the synaptics documentation section 3.2, in this mode, the device sends a continuous stream of packets at the maximum rate to the host when the user's fingers are near or on the pad or pressing buttons, and continues streaming for 1 second afterwards. These packets are even sent when there is no new information to report, even when they are duplicates of the previous packet. For embedded systems this is a bit much - it results in a huge and uninterrupted stream of interrupts at high rate. This patch adds support for Relative mode, which can be selected as a new psmouse protocol. In this mode, the device does not send duplicate packets and acts like a standard PS/2 mouse. However, synaptics-specific functionality is still available, such as the ability to set the packet rate, and rather than disabling gestures and taps at the hardware level unconditionally, a 'synaptics_disable_gesture' sysfs attribute has been added to allow control of this functionality. This solves a long standing OLPC issue: synaptics hardware enables tap to click by default (even in the default relative mode), but we have found this to be inappropriate for young children and first time computer users. Enabling the synaptics driver disables tap-to-click, but we have previously been unable to use this because it also enables Absolute mode, which is too "spammy" for our desires and actually overloads our EC with its continuous stream of packets. Now we can enable the synaptics driver, disabling tap to click while retaining the less noisy Relative mode. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-08 16:00:35 +08:00
psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse);
int psmouse_activate(struct psmouse *psmouse);
int psmouse_deactivate(struct psmouse *psmouse);
bool psmouse_matches_pnp_id(struct psmouse *psmouse, const char * const ids[]);
void psmouse_report_standard_buttons(struct input_dev *, u8 buttons);
void psmouse_report_standard_motion(struct input_dev *, u8 *packet);
void psmouse_report_standard_packet(struct input_dev *, u8 *packet);
struct psmouse_attribute {
struct device_attribute dattr;
void *data;
ssize_t (*show)(struct psmouse *psmouse, void *data, char *buf);
ssize_t (*set)(struct psmouse *psmouse, void *data,
const char *buf, size_t count);
bool protect;
};
#define to_psmouse_attr(a) container_of((a), struct psmouse_attribute, dattr)
ssize_t psmouse_attr_show_helper(struct device *dev, struct device_attribute *attr,
char *buf);
ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count);
#define __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, _show, _set, _protect) \
static struct psmouse_attribute psmouse_attr_##_name = { \
.dattr = { \
.attr = { \
.name = __stringify(_name), \
.mode = _mode, \
}, \
.show = psmouse_attr_show_helper, \
.store = psmouse_attr_set_helper, \
}, \
.data = _data, \
.show = _show, \
.set = _set, \
.protect = _protect, \
}
#define __PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set, _protect) \
static ssize_t _show(struct psmouse *, void *, char *); \
static ssize_t _set(struct psmouse *, void *, const char *, size_t); \
__PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, _show, _set, _protect)
#define PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set) \
__PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set, true)
#define PSMOUSE_DEFINE_RO_ATTR(_name, _mode, _data, _show) \
static ssize_t _show(struct psmouse *, void *, char *); \
__PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, _show, NULL, true)
#define PSMOUSE_DEFINE_WO_ATTR(_name, _mode, _data, _set) \
static ssize_t _set(struct psmouse *, void *, const char *, size_t); \
__PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, NULL, _set, true)
#ifndef psmouse_fmt
#define psmouse_fmt(fmt) KBUILD_BASENAME ": " fmt
#endif
#define psmouse_dbg(psmouse, format, ...) \
dev_dbg(&(psmouse)->ps2dev.serio->dev, \
psmouse_fmt(format), ##__VA_ARGS__)
#define psmouse_info(psmouse, format, ...) \
dev_info(&(psmouse)->ps2dev.serio->dev, \
psmouse_fmt(format), ##__VA_ARGS__)
#define psmouse_warn(psmouse, format, ...) \
dev_warn(&(psmouse)->ps2dev.serio->dev, \
psmouse_fmt(format), ##__VA_ARGS__)
#define psmouse_err(psmouse, format, ...) \
dev_err(&(psmouse)->ps2dev.serio->dev, \
psmouse_fmt(format), ##__VA_ARGS__)
#define psmouse_notice(psmouse, format, ...) \
dev_notice(&(psmouse)->ps2dev.serio->dev, \
psmouse_fmt(format), ##__VA_ARGS__)
#define psmouse_printk(level, psmouse, format, ...) \
dev_printk(level, \
&(psmouse)->ps2dev.serio->dev, \
psmouse_fmt(format), ##__VA_ARGS__)
#ifdef CONFIG_MOUSE_PS2_SMBUS
int psmouse_smbus_module_init(void);
void psmouse_smbus_module_exit(void);
struct i2c_board_info;
int psmouse_smbus_init(struct psmouse *psmouse,
const struct i2c_board_info *board,
const void *pdata, size_t pdata_size,
bool need_deactivate,
bool leave_breadcrumbs);
void psmouse_smbus_cleanup(struct psmouse *psmouse);
#else /* !CONFIG_MOUSE_PS2_SMBUS */
static inline int psmouse_smbus_module_init(void)
{
return 0;
}
static inline void psmouse_smbus_module_exit(void)
{
}
static inline void psmouse_smbus_cleanup(struct psmouse *psmouse)
{
}
#endif /* CONFIG_MOUSE_PS2_SMBUS */
#endif /* _PSMOUSE_H */