linux/drivers/media/platform/exynos4-is/fimc-reg.c

841 lines
22 KiB
C
Raw Normal View History

/*
* Register interface file for Samsung Camera Interface (FIMC) driver
*
* Copyright (C) 2010 - 2013 Samsung Electronics Co., Ltd.
* Sylwester Nawrocki <s.nawrocki@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/regmap.h>
#include <media/s5p_fimc.h>
#include "media-dev.h"
#include "fimc-reg.h"
#include "fimc-core.h"
void fimc_hw_reset(struct fimc_dev *dev)
{
u32 cfg;
cfg = readl(dev->regs + FIMC_REG_CISRCFMT);
cfg |= FIMC_REG_CISRCFMT_ITU601_8BIT;
writel(cfg, dev->regs + FIMC_REG_CISRCFMT);
/* Software reset. */
cfg = readl(dev->regs + FIMC_REG_CIGCTRL);
cfg |= (FIMC_REG_CIGCTRL_SWRST | FIMC_REG_CIGCTRL_IRQ_LEVEL);
writel(cfg, dev->regs + FIMC_REG_CIGCTRL);
udelay(10);
cfg = readl(dev->regs + FIMC_REG_CIGCTRL);
cfg &= ~FIMC_REG_CIGCTRL_SWRST;
writel(cfg, dev->regs + FIMC_REG_CIGCTRL);
if (dev->drv_data->out_buf_count > 4)
fimc_hw_set_dma_seq(dev, 0xF);
}
static u32 fimc_hw_get_in_flip(struct fimc_ctx *ctx)
{
u32 flip = FIMC_REG_MSCTRL_FLIP_NORMAL;
if (ctx->hflip)
flip = FIMC_REG_MSCTRL_FLIP_Y_MIRROR;
if (ctx->vflip)
flip = FIMC_REG_MSCTRL_FLIP_X_MIRROR;
if (ctx->rotation <= 90)
return flip;
return (flip ^ FIMC_REG_MSCTRL_FLIP_180) & FIMC_REG_MSCTRL_FLIP_180;
}
static u32 fimc_hw_get_target_flip(struct fimc_ctx *ctx)
{
u32 flip = FIMC_REG_CITRGFMT_FLIP_NORMAL;
if (ctx->hflip)
flip |= FIMC_REG_CITRGFMT_FLIP_Y_MIRROR;
if (ctx->vflip)
flip |= FIMC_REG_CITRGFMT_FLIP_X_MIRROR;
if (ctx->rotation <= 90)
return flip;
return (flip ^ FIMC_REG_CITRGFMT_FLIP_180) & FIMC_REG_CITRGFMT_FLIP_180;
}
void fimc_hw_set_rotation(struct fimc_ctx *ctx)
{
u32 cfg, flip;
struct fimc_dev *dev = ctx->fimc_dev;
cfg = readl(dev->regs + FIMC_REG_CITRGFMT);
cfg &= ~(FIMC_REG_CITRGFMT_INROT90 | FIMC_REG_CITRGFMT_OUTROT90 |
FIMC_REG_CITRGFMT_FLIP_180);
/*
* The input and output rotator cannot work simultaneously.
* Use the output rotator in output DMA mode or the input rotator
* in direct fifo output mode.
*/
if (ctx->rotation == 90 || ctx->rotation == 270) {
if (ctx->out_path == FIMC_IO_LCDFIFO)
cfg |= FIMC_REG_CITRGFMT_INROT90;
else
cfg |= FIMC_REG_CITRGFMT_OUTROT90;
}
if (ctx->out_path == FIMC_IO_DMA) {
cfg |= fimc_hw_get_target_flip(ctx);
writel(cfg, dev->regs + FIMC_REG_CITRGFMT);
} else {
/* LCD FIFO path */
flip = readl(dev->regs + FIMC_REG_MSCTRL);
flip &= ~FIMC_REG_MSCTRL_FLIP_MASK;
flip |= fimc_hw_get_in_flip(ctx);
writel(flip, dev->regs + FIMC_REG_MSCTRL);
}
}
void fimc_hw_set_target_format(struct fimc_ctx *ctx)
{
u32 cfg;
struct fimc_dev *dev = ctx->fimc_dev;
struct fimc_frame *frame = &ctx->d_frame;
dbg("w= %d, h= %d color: %d", frame->width,
frame->height, frame->fmt->color);
cfg = readl(dev->regs + FIMC_REG_CITRGFMT);
cfg &= ~(FIMC_REG_CITRGFMT_FMT_MASK | FIMC_REG_CITRGFMT_HSIZE_MASK |
FIMC_REG_CITRGFMT_VSIZE_MASK);
switch (frame->fmt->color) {
case FIMC_FMT_RGB444...FIMC_FMT_RGB888:
cfg |= FIMC_REG_CITRGFMT_RGB;
break;
case FIMC_FMT_YCBCR420:
cfg |= FIMC_REG_CITRGFMT_YCBCR420;
break;
case FIMC_FMT_YCBYCR422...FIMC_FMT_CRYCBY422:
if (frame->fmt->colplanes == 1)
cfg |= FIMC_REG_CITRGFMT_YCBCR422_1P;
else
cfg |= FIMC_REG_CITRGFMT_YCBCR422;
break;
default:
break;
}
if (ctx->rotation == 90 || ctx->rotation == 270)
cfg |= (frame->height << 16) | frame->width;
else
cfg |= (frame->width << 16) | frame->height;
writel(cfg, dev->regs + FIMC_REG_CITRGFMT);
cfg = readl(dev->regs + FIMC_REG_CITAREA);
cfg &= ~FIMC_REG_CITAREA_MASK;
cfg |= (frame->width * frame->height);
writel(cfg, dev->regs + FIMC_REG_CITAREA);
}
static void fimc_hw_set_out_dma_size(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
struct fimc_frame *frame = &ctx->d_frame;
u32 cfg;
cfg = (frame->f_height << 16) | frame->f_width;
writel(cfg, dev->regs + FIMC_REG_ORGOSIZE);
/* Select color space conversion equation (HD/SD size).*/
cfg = readl(dev->regs + FIMC_REG_CIGCTRL);
if (frame->f_width >= 1280) /* HD */
cfg |= FIMC_REG_CIGCTRL_CSC_ITU601_709;
else /* SD */
cfg &= ~FIMC_REG_CIGCTRL_CSC_ITU601_709;
writel(cfg, dev->regs + FIMC_REG_CIGCTRL);
}
void fimc_hw_set_out_dma(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
struct fimc_frame *frame = &ctx->d_frame;
struct fimc_dma_offset *offset = &frame->dma_offset;
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
struct fimc_fmt *fmt = frame->fmt;
u32 cfg;
/* Set the input dma offsets. */
cfg = (offset->y_v << 16) | offset->y_h;
writel(cfg, dev->regs + FIMC_REG_CIOYOFF);
cfg = (offset->cb_v << 16) | offset->cb_h;
writel(cfg, dev->regs + FIMC_REG_CIOCBOFF);
cfg = (offset->cr_v << 16) | offset->cr_h;
writel(cfg, dev->regs + FIMC_REG_CIOCROFF);
fimc_hw_set_out_dma_size(ctx);
/* Configure chroma components order. */
cfg = readl(dev->regs + FIMC_REG_CIOCTRL);
cfg &= ~(FIMC_REG_CIOCTRL_ORDER2P_MASK |
FIMC_REG_CIOCTRL_ORDER422_MASK |
FIMC_REG_CIOCTRL_YCBCR_PLANE_MASK |
FIMC_REG_CIOCTRL_RGB16FMT_MASK);
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
if (fmt->colplanes == 1)
cfg |= ctx->out_order_1p;
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
else if (fmt->colplanes == 2)
cfg |= ctx->out_order_2p | FIMC_REG_CIOCTRL_YCBCR_2PLANE;
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
else if (fmt->colplanes == 3)
cfg |= FIMC_REG_CIOCTRL_YCBCR_3PLANE;
if (fmt->color == FIMC_FMT_RGB565)
cfg |= FIMC_REG_CIOCTRL_RGB565;
else if (fmt->color == FIMC_FMT_RGB555)
cfg |= FIMC_REG_CIOCTRL_ARGB1555;
else if (fmt->color == FIMC_FMT_RGB444)
cfg |= FIMC_REG_CIOCTRL_ARGB4444;
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
writel(cfg, dev->regs + FIMC_REG_CIOCTRL);
}
static void fimc_hw_en_autoload(struct fimc_dev *dev, int enable)
{
u32 cfg = readl(dev->regs + FIMC_REG_ORGISIZE);
if (enable)
cfg |= FIMC_REG_CIREAL_ISIZE_AUTOLOAD_EN;
else
cfg &= ~FIMC_REG_CIREAL_ISIZE_AUTOLOAD_EN;
writel(cfg, dev->regs + FIMC_REG_ORGISIZE);
}
void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable)
{
u32 cfg = readl(dev->regs + FIMC_REG_CIOCTRL);
if (enable)
cfg |= FIMC_REG_CIOCTRL_LASTIRQ_ENABLE;
else
cfg &= ~FIMC_REG_CIOCTRL_LASTIRQ_ENABLE;
writel(cfg, dev->regs + FIMC_REG_CIOCTRL);
}
void fimc_hw_set_prescaler(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
struct fimc_scaler *sc = &ctx->scaler;
u32 cfg, shfactor;
shfactor = 10 - (sc->hfactor + sc->vfactor);
cfg = shfactor << 28;
cfg |= (sc->pre_hratio << 16) | sc->pre_vratio;
writel(cfg, dev->regs + FIMC_REG_CISCPRERATIO);
cfg = (sc->pre_dst_width << 16) | sc->pre_dst_height;
writel(cfg, dev->regs + FIMC_REG_CISCPREDST);
}
static void fimc_hw_set_scaler(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
struct fimc_scaler *sc = &ctx->scaler;
struct fimc_frame *src_frame = &ctx->s_frame;
struct fimc_frame *dst_frame = &ctx->d_frame;
u32 cfg = readl(dev->regs + FIMC_REG_CISCCTRL);
cfg &= ~(FIMC_REG_CISCCTRL_CSCR2Y_WIDE | FIMC_REG_CISCCTRL_CSCY2R_WIDE |
FIMC_REG_CISCCTRL_SCALEUP_H | FIMC_REG_CISCCTRL_SCALEUP_V |
FIMC_REG_CISCCTRL_SCALERBYPASS | FIMC_REG_CISCCTRL_ONE2ONE |
FIMC_REG_CISCCTRL_INRGB_FMT_MASK | FIMC_REG_CISCCTRL_OUTRGB_FMT_MASK |
FIMC_REG_CISCCTRL_INTERLACE | FIMC_REG_CISCCTRL_RGB_EXT);
if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW))
cfg |= (FIMC_REG_CISCCTRL_CSCR2Y_WIDE |
FIMC_REG_CISCCTRL_CSCY2R_WIDE);
if (!sc->enabled)
cfg |= FIMC_REG_CISCCTRL_SCALERBYPASS;
if (sc->scaleup_h)
cfg |= FIMC_REG_CISCCTRL_SCALEUP_H;
if (sc->scaleup_v)
cfg |= FIMC_REG_CISCCTRL_SCALEUP_V;
if (sc->copy_mode)
cfg |= FIMC_REG_CISCCTRL_ONE2ONE;
if (ctx->in_path == FIMC_IO_DMA) {
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
switch (src_frame->fmt->color) {
case FIMC_FMT_RGB565:
cfg |= FIMC_REG_CISCCTRL_INRGB_FMT_RGB565;
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
break;
case FIMC_FMT_RGB666:
cfg |= FIMC_REG_CISCCTRL_INRGB_FMT_RGB666;
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
break;
case FIMC_FMT_RGB888:
cfg |= FIMC_REG_CISCCTRL_INRGB_FMT_RGB888;
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
break;
}
}
if (ctx->out_path == FIMC_IO_DMA) {
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
u32 color = dst_frame->fmt->color;
if (color >= FIMC_FMT_RGB444 && color <= FIMC_FMT_RGB565)
cfg |= FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB565;
else if (color == FIMC_FMT_RGB666)
cfg |= FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB666;
else if (color == FIMC_FMT_RGB888)
cfg |= FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB888;
} else {
cfg |= FIMC_REG_CISCCTRL_OUTRGB_FMT_RGB888;
if (ctx->flags & FIMC_SCAN_MODE_INTERLACED)
cfg |= FIMC_REG_CISCCTRL_INTERLACE;
}
writel(cfg, dev->regs + FIMC_REG_CISCCTRL);
}
void fimc_hw_set_mainscaler(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
const struct fimc_variant *variant = dev->variant;
struct fimc_scaler *sc = &ctx->scaler;
u32 cfg;
dbg("main_hratio= 0x%X main_vratio= 0x%X",
sc->main_hratio, sc->main_vratio);
fimc_hw_set_scaler(ctx);
cfg = readl(dev->regs + FIMC_REG_CISCCTRL);
cfg &= ~(FIMC_REG_CISCCTRL_MHRATIO_MASK |
FIMC_REG_CISCCTRL_MVRATIO_MASK);
if (variant->has_mainscaler_ext) {
cfg |= FIMC_REG_CISCCTRL_MHRATIO_EXT(sc->main_hratio);
cfg |= FIMC_REG_CISCCTRL_MVRATIO_EXT(sc->main_vratio);
writel(cfg, dev->regs + FIMC_REG_CISCCTRL);
cfg = readl(dev->regs + FIMC_REG_CIEXTEN);
cfg &= ~(FIMC_REG_CIEXTEN_MVRATIO_EXT_MASK |
FIMC_REG_CIEXTEN_MHRATIO_EXT_MASK);
cfg |= FIMC_REG_CIEXTEN_MHRATIO_EXT(sc->main_hratio);
cfg |= FIMC_REG_CIEXTEN_MVRATIO_EXT(sc->main_vratio);
writel(cfg, dev->regs + FIMC_REG_CIEXTEN);
} else {
cfg |= FIMC_REG_CISCCTRL_MHRATIO(sc->main_hratio);
cfg |= FIMC_REG_CISCCTRL_MVRATIO(sc->main_vratio);
writel(cfg, dev->regs + FIMC_REG_CISCCTRL);
}
}
void fimc_hw_enable_capture(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
u32 cfg;
cfg = readl(dev->regs + FIMC_REG_CIIMGCPT);
cfg |= FIMC_REG_CIIMGCPT_CPT_FREN_ENABLE;
if (ctx->scaler.enabled)
cfg |= FIMC_REG_CIIMGCPT_IMGCPTEN_SC;
else
cfg &= FIMC_REG_CIIMGCPT_IMGCPTEN_SC;
cfg |= FIMC_REG_CIIMGCPT_IMGCPTEN;
writel(cfg, dev->regs + FIMC_REG_CIIMGCPT);
}
void fimc_hw_disable_capture(struct fimc_dev *dev)
{
u32 cfg = readl(dev->regs + FIMC_REG_CIIMGCPT);
cfg &= ~(FIMC_REG_CIIMGCPT_IMGCPTEN |
FIMC_REG_CIIMGCPT_IMGCPTEN_SC);
writel(cfg, dev->regs + FIMC_REG_CIIMGCPT);
}
void fimc_hw_set_effect(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
struct fimc_effect *effect = &ctx->effect;
u32 cfg = 0;
if (effect->type != FIMC_REG_CIIMGEFF_FIN_BYPASS) {
cfg |= FIMC_REG_CIIMGEFF_IE_SC_AFTER |
FIMC_REG_CIIMGEFF_IE_ENABLE;
cfg |= effect->type;
if (effect->type == FIMC_REG_CIIMGEFF_FIN_ARBITRARY)
cfg |= (effect->pat_cb << 13) | effect->pat_cr;
}
writel(cfg, dev->regs + FIMC_REG_CIIMGEFF);
}
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
void fimc_hw_set_rgb_alpha(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
struct fimc_frame *frame = &ctx->d_frame;
u32 cfg;
if (!(frame->fmt->flags & FMT_HAS_ALPHA))
return;
cfg = readl(dev->regs + FIMC_REG_CIOCTRL);
cfg &= ~FIMC_REG_CIOCTRL_ALPHA_OUT_MASK;
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
cfg |= (frame->alpha << 4);
writel(cfg, dev->regs + FIMC_REG_CIOCTRL);
[media] s5p-fimc: Add support for alpha component configuration On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-02 01:02:24 +08:00
}
static void fimc_hw_set_in_dma_size(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
struct fimc_frame *frame = &ctx->s_frame;
u32 cfg_o = 0;
u32 cfg_r = 0;
if (FIMC_IO_LCDFIFO == ctx->out_path)
cfg_r |= FIMC_REG_CIREAL_ISIZE_AUTOLOAD_EN;
cfg_o |= (frame->f_height << 16) | frame->f_width;
cfg_r |= (frame->height << 16) | frame->width;
writel(cfg_o, dev->regs + FIMC_REG_ORGISIZE);
writel(cfg_r, dev->regs + FIMC_REG_CIREAL_ISIZE);
}
void fimc_hw_set_in_dma(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
struct fimc_frame *frame = &ctx->s_frame;
struct fimc_dma_offset *offset = &frame->dma_offset;
u32 cfg;
/* Set the pixel offsets. */
cfg = (offset->y_v << 16) | offset->y_h;
writel(cfg, dev->regs + FIMC_REG_CIIYOFF);
cfg = (offset->cb_v << 16) | offset->cb_h;
writel(cfg, dev->regs + FIMC_REG_CIICBOFF);
cfg = (offset->cr_v << 16) | offset->cr_h;
writel(cfg, dev->regs + FIMC_REG_CIICROFF);
/* Input original and real size. */
fimc_hw_set_in_dma_size(ctx);
/* Use DMA autoload only in FIFO mode. */
fimc_hw_en_autoload(dev, ctx->out_path == FIMC_IO_LCDFIFO);
/* Set the input DMA to process single frame only. */
cfg = readl(dev->regs + FIMC_REG_MSCTRL);
cfg &= ~(FIMC_REG_MSCTRL_INFORMAT_MASK
| FIMC_REG_MSCTRL_IN_BURST_COUNT_MASK
| FIMC_REG_MSCTRL_INPUT_MASK
| FIMC_REG_MSCTRL_C_INT_IN_MASK
| FIMC_REG_MSCTRL_2P_IN_ORDER_MASK);
cfg |= (FIMC_REG_MSCTRL_IN_BURST_COUNT(4)
| FIMC_REG_MSCTRL_INPUT_MEMORY
| FIMC_REG_MSCTRL_FIFO_CTRL_FULL);
switch (frame->fmt->color) {
case FIMC_FMT_RGB565...FIMC_FMT_RGB888:
cfg |= FIMC_REG_MSCTRL_INFORMAT_RGB;
break;
case FIMC_FMT_YCBCR420:
cfg |= FIMC_REG_MSCTRL_INFORMAT_YCBCR420;
if (frame->fmt->colplanes == 2)
cfg |= ctx->in_order_2p | FIMC_REG_MSCTRL_C_INT_IN_2PLANE;
else
cfg |= FIMC_REG_MSCTRL_C_INT_IN_3PLANE;
break;
case FIMC_FMT_YCBYCR422...FIMC_FMT_CRYCBY422:
if (frame->fmt->colplanes == 1) {
cfg |= ctx->in_order_1p
| FIMC_REG_MSCTRL_INFORMAT_YCBCR422_1P;
} else {
cfg |= FIMC_REG_MSCTRL_INFORMAT_YCBCR422;
if (frame->fmt->colplanes == 2)
cfg |= ctx->in_order_2p
| FIMC_REG_MSCTRL_C_INT_IN_2PLANE;
else
cfg |= FIMC_REG_MSCTRL_C_INT_IN_3PLANE;
}
break;
default:
break;
}
writel(cfg, dev->regs + FIMC_REG_MSCTRL);
/* Input/output DMA linear/tiled mode. */
cfg = readl(dev->regs + FIMC_REG_CIDMAPARAM);
cfg &= ~FIMC_REG_CIDMAPARAM_TILE_MASK;
if (tiled_fmt(ctx->s_frame.fmt))
cfg |= FIMC_REG_CIDMAPARAM_R_64X32;
if (tiled_fmt(ctx->d_frame.fmt))
cfg |= FIMC_REG_CIDMAPARAM_W_64X32;
writel(cfg, dev->regs + FIMC_REG_CIDMAPARAM);
}
void fimc_hw_set_input_path(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
u32 cfg = readl(dev->regs + FIMC_REG_MSCTRL);
cfg &= ~FIMC_REG_MSCTRL_INPUT_MASK;
if (ctx->in_path == FIMC_IO_DMA)
cfg |= FIMC_REG_MSCTRL_INPUT_MEMORY;
else
cfg |= FIMC_REG_MSCTRL_INPUT_EXTCAM;
writel(cfg, dev->regs + FIMC_REG_MSCTRL);
}
void fimc_hw_set_output_path(struct fimc_ctx *ctx)
{
struct fimc_dev *dev = ctx->fimc_dev;
u32 cfg = readl(dev->regs + FIMC_REG_CISCCTRL);
cfg &= ~FIMC_REG_CISCCTRL_LCDPATHEN_FIFO;
if (ctx->out_path == FIMC_IO_LCDFIFO)
cfg |= FIMC_REG_CISCCTRL_LCDPATHEN_FIFO;
writel(cfg, dev->regs + FIMC_REG_CISCCTRL);
}
void fimc_hw_set_input_addr(struct fimc_dev *dev, struct fimc_addr *paddr)
{
u32 cfg = readl(dev->regs + FIMC_REG_CIREAL_ISIZE);
cfg |= FIMC_REG_CIREAL_ISIZE_ADDR_CH_DIS;
writel(cfg, dev->regs + FIMC_REG_CIREAL_ISIZE);
writel(paddr->y, dev->regs + FIMC_REG_CIIYSA(0));
writel(paddr->cb, dev->regs + FIMC_REG_CIICBSA(0));
writel(paddr->cr, dev->regs + FIMC_REG_CIICRSA(0));
cfg &= ~FIMC_REG_CIREAL_ISIZE_ADDR_CH_DIS;
writel(cfg, dev->regs + FIMC_REG_CIREAL_ISIZE);
}
void fimc_hw_set_output_addr(struct fimc_dev *dev,
struct fimc_addr *paddr, int index)
{
int i = (index == -1) ? 0 : index;
do {
writel(paddr->y, dev->regs + FIMC_REG_CIOYSA(i));
writel(paddr->cb, dev->regs + FIMC_REG_CIOCBSA(i));
writel(paddr->cr, dev->regs + FIMC_REG_CIOCRSA(i));
dbg("dst_buf[%d]: 0x%X, cb: 0x%X, cr: 0x%X",
i, paddr->y, paddr->cb, paddr->cr);
} while (index == -1 && ++i < FIMC_MAX_OUT_BUFS);
}
int fimc_hw_set_camera_polarity(struct fimc_dev *fimc,
struct fimc_source_info *cam)
{
u32 cfg = readl(fimc->regs + FIMC_REG_CIGCTRL);
cfg &= ~(FIMC_REG_CIGCTRL_INVPOLPCLK | FIMC_REG_CIGCTRL_INVPOLVSYNC |
FIMC_REG_CIGCTRL_INVPOLHREF | FIMC_REG_CIGCTRL_INVPOLHSYNC |
FIMC_REG_CIGCTRL_INVPOLFIELD);
if (cam->flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
cfg |= FIMC_REG_CIGCTRL_INVPOLPCLK;
if (cam->flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
cfg |= FIMC_REG_CIGCTRL_INVPOLVSYNC;
if (cam->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
cfg |= FIMC_REG_CIGCTRL_INVPOLHREF;
if (cam->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
cfg |= FIMC_REG_CIGCTRL_INVPOLHSYNC;
if (cam->flags & V4L2_MBUS_FIELD_EVEN_LOW)
cfg |= FIMC_REG_CIGCTRL_INVPOLFIELD;
writel(cfg, fimc->regs + FIMC_REG_CIGCTRL);
return 0;
}
struct mbus_pixfmt_desc {
u32 pixelcode;
u32 cisrcfmt;
u16 bus_width;
};
static const struct mbus_pixfmt_desc pix_desc[] = {
{ V4L2_MBUS_FMT_YUYV8_2X8, FIMC_REG_CISRCFMT_ORDER422_YCBYCR, 8 },
{ V4L2_MBUS_FMT_YVYU8_2X8, FIMC_REG_CISRCFMT_ORDER422_YCRYCB, 8 },
{ V4L2_MBUS_FMT_VYUY8_2X8, FIMC_REG_CISRCFMT_ORDER422_CRYCBY, 8 },
{ V4L2_MBUS_FMT_UYVY8_2X8, FIMC_REG_CISRCFMT_ORDER422_CBYCRY, 8 },
};
int fimc_hw_set_camera_source(struct fimc_dev *fimc,
struct fimc_source_info *source)
{
struct fimc_vid_cap *vc = &fimc->vid_cap;
struct fimc_frame *f = &vc->ctx->s_frame;
u32 bus_width, cfg = 0;
int i;
switch (source->fimc_bus_type) {
case FIMC_BUS_TYPE_ITU_601:
case FIMC_BUS_TYPE_ITU_656:
for (i = 0; i < ARRAY_SIZE(pix_desc); i++) {
if (vc->ci_fmt.code == pix_desc[i].pixelcode) {
cfg = pix_desc[i].cisrcfmt;
bus_width = pix_desc[i].bus_width;
break;
}
}
if (i == ARRAY_SIZE(pix_desc)) {
v4l2_err(&vc->vfd,
"Camera color format not supported: %d\n",
vc->ci_fmt.code);
return -EINVAL;
}
if (source->fimc_bus_type == FIMC_BUS_TYPE_ITU_601) {
if (bus_width == 8)
cfg |= FIMC_REG_CISRCFMT_ITU601_8BIT;
else if (bus_width == 16)
cfg |= FIMC_REG_CISRCFMT_ITU601_16BIT;
} /* else defaults to ITU-R BT.656 8-bit */
break;
case FIMC_BUS_TYPE_MIPI_CSI2:
if (fimc_fmt_is_user_defined(f->fmt->color))
cfg |= FIMC_REG_CISRCFMT_ITU601_8BIT;
break;
default:
case FIMC_BUS_TYPE_ISP_WRITEBACK:
/* Anything to do here ? */
break;
}
cfg |= (f->o_width << 16) | f->o_height;
writel(cfg, fimc->regs + FIMC_REG_CISRCFMT);
return 0;
}
void fimc_hw_set_camera_offset(struct fimc_dev *fimc, struct fimc_frame *f)
{
u32 hoff2, voff2;
u32 cfg = readl(fimc->regs + FIMC_REG_CIWDOFST);
cfg &= ~(FIMC_REG_CIWDOFST_HOROFF_MASK | FIMC_REG_CIWDOFST_VEROFF_MASK);
cfg |= FIMC_REG_CIWDOFST_OFF_EN |
(f->offs_h << 16) | f->offs_v;
writel(cfg, fimc->regs + FIMC_REG_CIWDOFST);
/* See CIWDOFSTn register description in the datasheet for details. */
hoff2 = f->o_width - f->width - f->offs_h;
voff2 = f->o_height - f->height - f->offs_v;
cfg = (hoff2 << 16) | voff2;
writel(cfg, fimc->regs + FIMC_REG_CIWDOFST2);
}
int fimc_hw_set_camera_type(struct fimc_dev *fimc,
struct fimc_source_info *source)
{
struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
u32 csis_data_alignment = 32;
u32 cfg, tmp;
cfg = readl(fimc->regs + FIMC_REG_CIGCTRL);
/* Select ITU B interface, disable Writeback path and test pattern. */
cfg &= ~(FIMC_REG_CIGCTRL_TESTPAT_MASK | FIMC_REG_CIGCTRL_SELCAM_ITU_A |
FIMC_REG_CIGCTRL_SELCAM_MIPI | FIMC_REG_CIGCTRL_CAMIF_SELWB |
FIMC_REG_CIGCTRL_SELCAM_MIPI_A | FIMC_REG_CIGCTRL_CAM_JPEG |
FIMC_REG_CIGCTRL_SELWB_A);
switch (source->fimc_bus_type) {
case FIMC_BUS_TYPE_MIPI_CSI2:
cfg |= FIMC_REG_CIGCTRL_SELCAM_MIPI;
if (source->mux_id == 0)
cfg |= FIMC_REG_CIGCTRL_SELCAM_MIPI_A;
/* TODO: add remaining supported formats. */
switch (vid_cap->ci_fmt.code) {
case V4L2_MBUS_FMT_VYUY8_2X8:
tmp = FIMC_REG_CSIIMGFMT_YCBCR422_8BIT;
break;
case V4L2_MBUS_FMT_JPEG_1X8:
case V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8:
tmp = FIMC_REG_CSIIMGFMT_USER(1);
cfg |= FIMC_REG_CIGCTRL_CAM_JPEG;
break;
default:
v4l2_err(&vid_cap->vfd,
"Not supported camera pixel format: %#x\n",
vid_cap->ci_fmt.code);
return -EINVAL;
}
tmp |= (csis_data_alignment == 32) << 8;
writel(tmp, fimc->regs + FIMC_REG_CSIIMGFMT);
break;
case FIMC_BUS_TYPE_ITU_601...FIMC_BUS_TYPE_ITU_656:
if (source->mux_id == 0) /* ITU-A, ITU-B: 0, 1 */
cfg |= FIMC_REG_CIGCTRL_SELCAM_ITU_A;
break;
case FIMC_BUS_TYPE_LCD_WRITEBACK_A:
cfg |= FIMC_REG_CIGCTRL_CAMIF_SELWB;
/* fall through */
case FIMC_BUS_TYPE_ISP_WRITEBACK:
if (fimc->variant->has_isp_wb)
cfg |= FIMC_REG_CIGCTRL_CAMIF_SELWB;
else
WARN_ONCE(1, "ISP Writeback input is not supported\n");
break;
default:
v4l2_err(&vid_cap->vfd, "Invalid FIMC bus type selected: %d\n",
source->fimc_bus_type);
return -EINVAL;
}
writel(cfg, fimc->regs + FIMC_REG_CIGCTRL);
return 0;
}
void fimc_hw_clear_irq(struct fimc_dev *dev)
{
u32 cfg = readl(dev->regs + FIMC_REG_CIGCTRL);
cfg |= FIMC_REG_CIGCTRL_IRQ_CLR;
writel(cfg, dev->regs + FIMC_REG_CIGCTRL);
}
void fimc_hw_enable_scaler(struct fimc_dev *dev, bool on)
{
u32 cfg = readl(dev->regs + FIMC_REG_CISCCTRL);
if (on)
cfg |= FIMC_REG_CISCCTRL_SCALERSTART;
else
cfg &= ~FIMC_REG_CISCCTRL_SCALERSTART;
writel(cfg, dev->regs + FIMC_REG_CISCCTRL);
}
void fimc_hw_activate_input_dma(struct fimc_dev *dev, bool on)
{
u32 cfg = readl(dev->regs + FIMC_REG_MSCTRL);
if (on)
cfg |= FIMC_REG_MSCTRL_ENVID;
else
cfg &= ~FIMC_REG_MSCTRL_ENVID;
writel(cfg, dev->regs + FIMC_REG_MSCTRL);
}
/* Return an index to the buffer actually being written. */
s32 fimc_hw_get_frame_index(struct fimc_dev *dev)
{
s32 reg;
if (dev->drv_data->cistatus2) {
reg = readl(dev->regs + FIMC_REG_CISTATUS2) & 0x3f;
return reg - 1;
}
reg = readl(dev->regs + FIMC_REG_CISTATUS);
return (reg & FIMC_REG_CISTATUS_FRAMECNT_MASK) >>
FIMC_REG_CISTATUS_FRAMECNT_SHIFT;
}
/* Return an index to the buffer being written previously. */
s32 fimc_hw_get_prev_frame_index(struct fimc_dev *dev)
{
s32 reg;
if (!dev->drv_data->cistatus2)
return -1;
reg = readl(dev->regs + FIMC_REG_CISTATUS2);
return ((reg >> 7) & 0x3f) - 1;
}
/* Locking: the caller holds fimc->slock */
void fimc_activate_capture(struct fimc_ctx *ctx)
{
fimc_hw_enable_scaler(ctx->fimc_dev, ctx->scaler.enabled);
fimc_hw_enable_capture(ctx);
}
void fimc_deactivate_capture(struct fimc_dev *fimc)
{
fimc_hw_en_lastirq(fimc, true);
fimc_hw_disable_capture(fimc);
fimc_hw_enable_scaler(fimc, false);
fimc_hw_en_lastirq(fimc, false);
}
int fimc_hw_camblk_cfg_writeback(struct fimc_dev *fimc)
{
struct regmap *map = fimc->sysreg;
unsigned int mask, val, camblk_cfg;
int ret;
if (map == NULL)
return 0;
ret = regmap_read(map, SYSREG_CAMBLK, &camblk_cfg);
if (ret < 0 || ((camblk_cfg & 0x00700000) >> 20 != 0x3))
return ret;
if (!WARN(fimc->id >= 3, "not supported id: %d\n", fimc->id))
val = 0x1 << (fimc->id + 20);
else
val = 0;
mask = SYSREG_CAMBLK_FIFORST_ISP | SYSREG_CAMBLK_ISPWB_FULL_EN;
ret = regmap_update_bits(map, SYSREG_CAMBLK, mask, val);
if (ret < 0)
return ret;
usleep_range(1000, 2000);
val |= SYSREG_CAMBLK_FIFORST_ISP;
ret = regmap_update_bits(map, SYSREG_CAMBLK, mask, val);
if (ret < 0)
return ret;
mask = SYSREG_ISPBLK_FIFORST_CAM_BLK;
ret = regmap_update_bits(map, SYSREG_ISPBLK, mask, ~mask);
if (ret < 0)
return ret;
usleep_range(1000, 2000);
return regmap_update_bits(map, SYSREG_ISPBLK, mask, mask);
}