openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/boot/dts/kirkwood.dtsi

97 lines
1.9 KiB
Plaintext
Raw Normal View History

ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
/include/ "skeleton.dtsi"
/ {
ARM: Kirkwood: Replace mrvl with marvell It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-19 01:22:54 +08:00
compatible = "marvell,kirkwood";
ARM: Orion: DT support for IRQ and GPIO Controllers Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-06-27 19:40:04 +08:00
interrupt-parent = <&intc>;
intc: interrupt-controller {
compatible = "marvell,orion-intc", "marvell,intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xf1020204 0x04>,
<0xf1020214 0x04>;
};
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0 Define both uarts in kirkwood.dtsi as they are common to all kirkwood SoCs. Each board may enable all or none of them, so they are disabled by default. uart0 is enabled for the dreamplug. tclk can vary for each board, so we leave it undefined in the kirkwood dtsi. Each board can then set it as appropriate when enabling the uart. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-15 09:00:27 +08:00
ocp@f1000000 {
compatible = "simple-bus";
kirkwood: Allow nand to be configured via. devicetree Add default configuration for NAND, to be enabled in your board config. Ensure clock gating is set appropriately when the NAND is enabled. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-18 18:06:42 +08:00
ranges = <0 0xf1000000 0x4000000>;
ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0 Define both uarts in kirkwood.dtsi as they are common to all kirkwood SoCs. Each board may enable all or none of them, so they are disabled by default. uart0 is enabled for the dreamplug. tclk can vary for each board, so we leave it undefined in the kirkwood dtsi. Each board can then set it as appropriate when enabling the uart. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-15 09:00:27 +08:00
#address-cells = <1>;
#size-cells = <1>;
ARM: Orion: DT support for IRQ and GPIO Controllers Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-06-27 19:40:04 +08:00
gpio0: gpio@10100 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
reg = <0x10100 0x40>;
ngpio = <32>;
interrupts = <35>, <36>, <37>, <38>;
};
gpio1: gpio@10140 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
reg = <0x10140 0x40>;
ngpio = <18>;
interrupts = <39>, <40>, <41>;
};
ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0 Define both uarts in kirkwood.dtsi as they are common to all kirkwood SoCs. Each board may enable all or none of them, so they are disabled by default. uart0 is enabled for the dreamplug. tclk can vary for each board, so we leave it undefined in the kirkwood dtsi. Each board can then set it as appropriate when enabling the uart. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-15 09:00:27 +08:00
serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <33>;
/* set clock-frequency in board dts */
status = "disabled";
};
serial@12100 {
compatible = "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <34>;
/* set clock-frequency in board dts */
status = "disabled";
};
ARM: kirkwood: use devicetree for rtc-mv Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-07 07:55:04 +08:00
rtc@10300 {
ARM: Kirkwood: Replace mrvl with marvell It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-19 01:22:54 +08:00
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
ARM: kirkwood: use devicetree for rtc-mv Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-07 07:55:04 +08:00
reg = <0x10300 0x20>;
interrupts = <53>;
};
kirkwood: Allow nand to be configured via. devicetree Add default configuration for NAND, to be enabled in your board config. Ensure clock gating is set appropriately when the NAND is enabled. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-18 18:06:42 +08:00
ARM: kirkwood: use devicetree for orion-spi Populate the devices with auxdata to set the device names which are used by clkdev to lookup the clocks. Signed-off-by: Michael Walle <micheal@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2: Add interrupts properties, although not used.
2012-06-07 02:30:57 +08:00
spi@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <23>;
reg = <0x10600 0x28>;
status = "disabled";
};
kirkwood: Allow nand to be configured via. devicetree Add default configuration for NAND, to be enabled in your board config. Ensure clock gating is set appropriately when the NAND is enabled. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-18 18:06:42 +08:00
nand@3000000 {
#address-cells = <1>;
#size-cells = <1>;
cle = <0>;
ale = <1>;
bank-width = <1>;
ARM: Kirkwood: Replace mrvl with marvell It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-19 01:22:54 +08:00
compatible = "marvell,orion-nand";
kirkwood: Allow nand to be configured via. devicetree Add default configuration for NAND, to be enabled in your board config. Ensure clock gating is set appropriately when the NAND is enabled. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-18 18:06:42 +08:00
reg = <0x3000000 0x400>;
chip-delay = <25>;
/* set partition map and/or chip-delay in board dts */
status = "disabled";
};
ARM: Orion: Add arch support needed for I2C via DT. The MV64XXX I2C driver needs a clock in order to calculate the baud rate factors. So add an clk to the clk tree. Also add the base DT properties for kirkwood devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Conflicts: arch/arm/mach-kirkwood/common.c
2012-07-20 19:51:55 +08:00
i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <29>;
clock-frequency = <100000>;
status = "disabled";
};
ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0 Define both uarts in kirkwood.dtsi as they are common to all kirkwood SoCs. Each board may enable all or none of them, so they are disabled by default. uart0 is enabled for the dreamplug. tclk can vary for each board, so we leave it undefined in the kirkwood dtsi. Each board can then set it as appropriate when enabling the uart. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-15 09:00:27 +08:00
};
};