linux/drivers/mtd/spi-nor/nxp-spifi.c

483 lines
11 KiB
C
Raw Normal View History

/*
* SPI-NOR driver for NXP SPI Flash Interface (SPIFI)
*
* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
*
* Based on Freescale QuadSPI driver:
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/spi-nor.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
/* NXP SPIFI registers, bits and macros */
#define SPIFI_CTRL 0x000
#define SPIFI_CTRL_TIMEOUT(timeout) (timeout)
#define SPIFI_CTRL_CSHIGH(cshigh) ((cshigh) << 16)
#define SPIFI_CTRL_MODE3 BIT(23)
#define SPIFI_CTRL_DUAL BIT(28)
#define SPIFI_CTRL_FBCLK BIT(30)
#define SPIFI_CMD 0x004
#define SPIFI_CMD_DATALEN(dlen) ((dlen) & 0x3fff)
#define SPIFI_CMD_DOUT BIT(15)
#define SPIFI_CMD_INTLEN(ilen) ((ilen) << 16)
#define SPIFI_CMD_FIELDFORM(field) ((field) << 19)
#define SPIFI_CMD_FIELDFORM_ALL_SERIAL SPIFI_CMD_FIELDFORM(0x0)
#define SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA SPIFI_CMD_FIELDFORM(0x1)
#define SPIFI_CMD_FRAMEFORM(frame) ((frame) << 21)
#define SPIFI_CMD_FRAMEFORM_OPCODE_ONLY SPIFI_CMD_FRAMEFORM(0x1)
#define SPIFI_CMD_OPCODE(op) ((op) << 24)
#define SPIFI_ADDR 0x008
#define SPIFI_IDATA 0x00c
#define SPIFI_CLIMIT 0x010
#define SPIFI_DATA 0x014
#define SPIFI_MCMD 0x018
#define SPIFI_STAT 0x01c
#define SPIFI_STAT_MCINIT BIT(0)
#define SPIFI_STAT_CMD BIT(1)
#define SPIFI_STAT_RESET BIT(4)
#define SPI_NOR_MAX_ID_LEN 6
struct nxp_spifi {
struct device *dev;
struct clk *clk_spifi;
struct clk *clk_reg;
void __iomem *io_base;
void __iomem *flash_base;
struct spi_nor nor;
bool memory_mode;
u32 mcmd;
};
static int nxp_spifi_wait_for_cmd(struct nxp_spifi *spifi)
{
u8 stat;
int ret;
ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
!(stat & SPIFI_STAT_CMD), 10, 30);
if (ret)
dev_warn(spifi->dev, "command timed out\n");
return ret;
}
static int nxp_spifi_reset(struct nxp_spifi *spifi)
{
u8 stat;
int ret;
writel(SPIFI_STAT_RESET, spifi->io_base + SPIFI_STAT);
ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
!(stat & SPIFI_STAT_RESET), 10, 30);
if (ret)
dev_warn(spifi->dev, "state reset timed out\n");
return ret;
}
static int nxp_spifi_set_memory_mode_off(struct nxp_spifi *spifi)
{
int ret;
if (!spifi->memory_mode)
return 0;
ret = nxp_spifi_reset(spifi);
if (ret)
dev_err(spifi->dev, "unable to enter command mode\n");
else
spifi->memory_mode = false;
return ret;
}
static int nxp_spifi_set_memory_mode_on(struct nxp_spifi *spifi)
{
u8 stat;
int ret;
if (spifi->memory_mode)
return 0;
writel(spifi->mcmd, spifi->io_base + SPIFI_MCMD);
ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
stat & SPIFI_STAT_MCINIT, 10, 30);
if (ret)
dev_err(spifi->dev, "unable to enter memory mode\n");
else
spifi->memory_mode = true;
return ret;
}
static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
{
struct nxp_spifi *spifi = nor->priv;
u32 cmd;
int ret;
ret = nxp_spifi_set_memory_mode_off(spifi);
if (ret)
return ret;
cmd = SPIFI_CMD_DATALEN(len) |
SPIFI_CMD_OPCODE(opcode) |
SPIFI_CMD_FIELDFORM_ALL_SERIAL |
SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
writel(cmd, spifi->io_base + SPIFI_CMD);
while (len--)
*buf++ = readb(spifi->io_base + SPIFI_DATA);
return nxp_spifi_wait_for_cmd(spifi);
}
static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
{
struct nxp_spifi *spifi = nor->priv;
u32 cmd;
int ret;
ret = nxp_spifi_set_memory_mode_off(spifi);
if (ret)
return ret;
cmd = SPIFI_CMD_DOUT |
SPIFI_CMD_DATALEN(len) |
SPIFI_CMD_OPCODE(opcode) |
SPIFI_CMD_FIELDFORM_ALL_SERIAL |
SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
writel(cmd, spifi->io_base + SPIFI_CMD);
while (len--)
writeb(*buf++, spifi->io_base + SPIFI_DATA);
return nxp_spifi_wait_for_cmd(spifi);
}
static ssize_t nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len,
u_char *buf)
{
struct nxp_spifi *spifi = nor->priv;
int ret;
ret = nxp_spifi_set_memory_mode_on(spifi);
if (ret)
return ret;
memcpy_fromio(buf, spifi->flash_base + from, len);
return len;
}
static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
const u_char *buf)
{
struct nxp_spifi *spifi = nor->priv;
u32 cmd;
int ret;
size_t i;
ret = nxp_spifi_set_memory_mode_off(spifi);
if (ret)
return ret;
writel(to, spifi->io_base + SPIFI_ADDR);
cmd = SPIFI_CMD_DOUT |
SPIFI_CMD_DATALEN(len) |
SPIFI_CMD_FIELDFORM_ALL_SERIAL |
SPIFI_CMD_OPCODE(nor->program_opcode) |
SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
writel(cmd, spifi->io_base + SPIFI_CMD);
for (i = 0; i < len; i++)
writeb(buf[i], spifi->io_base + SPIFI_DATA);
ret = nxp_spifi_wait_for_cmd(spifi);
if (ret)
return ret;
return len;
}
static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
{
struct nxp_spifi *spifi = nor->priv;
u32 cmd;
int ret;
ret = nxp_spifi_set_memory_mode_off(spifi);
if (ret)
return ret;
writel(offs, spifi->io_base + SPIFI_ADDR);
cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL |
SPIFI_CMD_OPCODE(nor->erase_opcode) |
SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
writel(cmd, spifi->io_base + SPIFI_CMD);
return nxp_spifi_wait_for_cmd(spifi);
}
static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
{
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-26 04:08:46 +08:00
switch (spifi->nor.read_proto) {
case SNOR_PROTO_1_1_1:
spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL;
break;
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-26 04:08:46 +08:00
case SNOR_PROTO_1_1_2:
case SNOR_PROTO_1_1_4:
spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA;
break;
default:
dev_err(spifi->dev, "unsupported SPI read mode\n");
return -EINVAL;
}
/* Memory mode supports address length between 1 and 4 */
if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4)
return -EINVAL;
spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) |
SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) |
SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
return 0;
}
static void nxp_spifi_dummy_id_read(struct spi_nor *nor)
{
u8 id[SPI_NOR_MAX_ID_LEN];
nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
}
static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
struct device_node *np)
{
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-26 04:08:46 +08:00
struct spi_nor_hwcaps hwcaps = {
.mask = SNOR_HWCAPS_READ |
SNOR_HWCAPS_READ_FAST |
SNOR_HWCAPS_PP,
};
u32 ctrl, property;
u16 mode = 0;
int ret;
if (!of_property_read_u32(np, "spi-rx-bus-width", &property)) {
switch (property) {
case 1:
break;
case 2:
mode |= SPI_RX_DUAL;
break;
case 4:
mode |= SPI_RX_QUAD;
break;
default:
dev_err(spifi->dev, "unsupported rx-bus-width\n");
return -EINVAL;
}
}
if (of_find_property(np, "spi-cpha", NULL))
mode |= SPI_CPHA;
if (of_find_property(np, "spi-cpol", NULL))
mode |= SPI_CPOL;
/* Setup control register defaults */
ctrl = SPIFI_CTRL_TIMEOUT(1000) |
SPIFI_CTRL_CSHIGH(15) |
SPIFI_CTRL_FBCLK;
if (mode & SPI_RX_DUAL) {
ctrl |= SPIFI_CTRL_DUAL;
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-26 04:08:46 +08:00
hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
} else if (mode & SPI_RX_QUAD) {
ctrl &= ~SPIFI_CTRL_DUAL;
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-26 04:08:46 +08:00
hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
} else {
ctrl |= SPIFI_CTRL_DUAL;
}
switch (mode & (SPI_CPHA | SPI_CPOL)) {
case SPI_MODE_0:
ctrl &= ~SPIFI_CTRL_MODE3;
break;
case SPI_MODE_3:
ctrl |= SPIFI_CTRL_MODE3;
break;
default:
dev_err(spifi->dev, "only mode 0 and 3 supported\n");
return -EINVAL;
}
writel(ctrl, spifi->io_base + SPIFI_CTRL);
spifi->nor.dev = spifi->dev;
spi_nor_set_flash_node(&spifi->nor, np);
spifi->nor.priv = spifi;
spifi->nor.read = nxp_spifi_read;
spifi->nor.write = nxp_spifi_write;
spifi->nor.erase = nxp_spifi_erase;
spifi->nor.read_reg = nxp_spifi_read_reg;
spifi->nor.write_reg = nxp_spifi_write_reg;
/*
* The first read on a hard reset isn't reliable so do a
* dummy read of the id before calling spi_nor_scan().
* The reason for this problem is unknown.
*
* The official NXP spifilib uses more or less the same
* workaround that is applied here by reading the device
* id multiple times.
*/
nxp_spifi_dummy_id_read(&spifi->nor);
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-26 04:08:46 +08:00
ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps);
if (ret) {
dev_err(spifi->dev, "device scan failed\n");
return ret;
}
ret = nxp_spifi_setup_memory_cmd(spifi);
if (ret) {
dev_err(spifi->dev, "memory command setup failed\n");
return ret;
}
ret = mtd_device_register(&spifi->nor.mtd, NULL, 0);
if (ret) {
dev_err(spifi->dev, "mtd device parse failed\n");
return ret;
}
return 0;
}
static int nxp_spifi_probe(struct platform_device *pdev)
{
struct device_node *flash_np;
struct nxp_spifi *spifi;
struct resource *res;
int ret;
spifi = devm_kzalloc(&pdev->dev, sizeof(*spifi), GFP_KERNEL);
if (!spifi)
return -ENOMEM;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spifi");
spifi->io_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(spifi->io_base))
return PTR_ERR(spifi->io_base);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash");
spifi->flash_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(spifi->flash_base))
return PTR_ERR(spifi->flash_base);
spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi");
if (IS_ERR(spifi->clk_spifi)) {
dev_err(&pdev->dev, "spifi clock not found\n");
return PTR_ERR(spifi->clk_spifi);
}
spifi->clk_reg = devm_clk_get(&pdev->dev, "reg");
if (IS_ERR(spifi->clk_reg)) {
dev_err(&pdev->dev, "reg clock not found\n");
return PTR_ERR(spifi->clk_reg);
}
ret = clk_prepare_enable(spifi->clk_reg);
if (ret) {
dev_err(&pdev->dev, "unable to enable reg clock\n");
return ret;
}
ret = clk_prepare_enable(spifi->clk_spifi);
if (ret) {
dev_err(&pdev->dev, "unable to enable spifi clock\n");
goto dis_clk_reg;
}
spifi->dev = &pdev->dev;
platform_set_drvdata(pdev, spifi);
/* Initialize and reset device */
nxp_spifi_reset(spifi);
writel(0, spifi->io_base + SPIFI_IDATA);
writel(0, spifi->io_base + SPIFI_MCMD);
nxp_spifi_reset(spifi);
flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
if (!flash_np) {
dev_err(&pdev->dev, "no SPI flash device to configure\n");
ret = -ENODEV;
goto dis_clks;
}
ret = nxp_spifi_setup_flash(spifi, flash_np);
if (ret) {
dev_err(&pdev->dev, "unable to setup flash chip\n");
goto dis_clks;
}
return 0;
dis_clks:
clk_disable_unprepare(spifi->clk_spifi);
dis_clk_reg:
clk_disable_unprepare(spifi->clk_reg);
return ret;
}
static int nxp_spifi_remove(struct platform_device *pdev)
{
struct nxp_spifi *spifi = platform_get_drvdata(pdev);
mtd_device_unregister(&spifi->nor.mtd);
clk_disable_unprepare(spifi->clk_spifi);
clk_disable_unprepare(spifi->clk_reg);
return 0;
}
static const struct of_device_id nxp_spifi_match[] = {
{.compatible = "nxp,lpc1773-spifi"},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, nxp_spifi_match);
static struct platform_driver nxp_spifi_driver = {
.probe = nxp_spifi_probe,
.remove = nxp_spifi_remove,
.driver = {
.name = "nxp-spifi",
.of_match_table = nxp_spifi_match,
},
};
module_platform_driver(nxp_spifi_driver);
MODULE_DESCRIPTION("NXP SPI Flash Interface driver");
MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
MODULE_LICENSE("GPL v2");