linux/arch/x86/kernel/irq.c

472 lines
13 KiB
C
Raw Normal View History

/*
* Common interrupt code for 32 and 64 bit
*/
#include <linux/cpu.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/of.h>
#include <linux/seq_file.h>
#include <linux/smp.h>
#include <linux/ftrace.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <asm/apic.h>
#include <asm/io_apic.h>
#include <asm/irq.h>
#include <asm/idle.h>
#include <asm/mce.h>
#include <asm/hw_irq.h>
#include <asm/desc.h>
trace,x86: Move creation of irq tracepoints from apic.c to irq.c Compiling without CONFIG_X86_LOCAL_APIC set, apic.c will not be compiled, and the irq tracepoints will not be created via the CREATE_TRACE_POINTS macro. When CONFIG_X86_LOCAL_APIC is not set, we get the following build error: LD init/built-in.o arch/x86/built-in.o: In function `trace_x86_platform_ipi_entry': linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:66: undefined reference to `__tracepoint_x86_platform_ipi_entry' arch/x86/built-in.o: In function `trace_x86_platform_ipi_exit': linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:66: undefined reference to `__tracepoint_x86_platform_ipi_exit' arch/x86/built-in.o: In function `trace_irq_work_entry': linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:72: undefined reference to `__tracepoint_irq_work_entry' arch/x86/built-in.o: In function `trace_irq_work_exit': linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:72: undefined reference to `__tracepoint_irq_work_exit' arch/x86/built-in.o:(__jump_table+0x8): undefined reference to `__tracepoint_x86_platform_ipi_entry' arch/x86/built-in.o:(__jump_table+0x14): undefined reference to `__tracepoint_x86_platform_ipi_exit' arch/x86/built-in.o:(__jump_table+0x20): undefined reference to `__tracepoint_irq_work_entry' arch/x86/built-in.o:(__jump_table+0x2c): undefined reference to `__tracepoint_irq_work_exit' make[1]: *** [vmlinux] Error 1 make: *** [sub-make] Error 2 As irq.c is always compiled for x86, it is a more appropriate location to create the irq tracepoints. Cc: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-21 22:29:05 +08:00
#define CREATE_TRACE_POINTS
x86, trace: Add irq vector tracepoints [Purpose of this patch] As Vaibhav explained in the thread below, tracepoints for irq vectors are useful. http://www.spinics.net/lists/mm-commits/msg85707.html <snip> The current interrupt traces from irq_handler_entry and irq_handler_exit provide when an interrupt is handled. They provide good data about when the system has switched to kernel space and how it affects the currently running processes. There are some IRQ vectors which trigger the system into kernel space, which are not handled in generic IRQ handlers. Tracing such events gives us the information about IRQ interaction with other system events. The trace also tells where the system is spending its time. We want to know which cores are handling interrupts and how they are affecting other processes in the system. Also, the trace provides information about when the cores are idle and which interrupts are changing that state. <snip> On the other hand, my usecase is tracing just local timer event and getting a value of instruction pointer. I suggested to add an argument local timer event to get instruction pointer before. But there is another way to get it with external module like systemtap. So, I don't need to add any argument to irq vector tracepoints now. [Patch Description] Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events. But there is an above use case to trace specific irq_vector rather than tracing all events. In this case, we are concerned about overhead due to unwanted events. So, add following tracepoints instead of introducing irq_vector_entry/exit. so that we can enable them independently. - local_timer_vector - reschedule_vector - call_function_vector - call_function_single_vector - irq_work_entry_vector - error_apic_vector - thermal_apic_vector - threshold_apic_vector - spurious_apic_vector - x86_platform_ipi_vector Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty makes a zero when tracepoints are disabled. Detailed explanations are as follows. - Create trace irq handlers with entering_irq()/exiting_irq(). - Create a new IDT, trace_idt_table, at boot time by adding a logic to _set_gate(). It is just a copy of original idt table. - Register the new handlers for tracpoints to the new IDT by introducing macros to alloc_intr_gate() called at registering time of irq_vector handlers. - Add checking, whether irq vector tracing is on/off, into load_current_idt(). This has to be done below debug checking for these reasons. - Switching to debug IDT may be kicked while tracing is enabled. - On the other hands, switching to trace IDT is kicked only when debugging is disabled. In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being used for other purposes. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 23:46:53 +08:00
#include <asm/trace/irq_vectors.h>
atomic_t irq_err_count;
/* Function pointer for generic interrupt vector handling */
void (*x86_platform_ipi_callback)(void) = NULL;
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
*/
void ack_bad_irq(unsigned int irq)
{
if (printk_ratelimit())
pr_err("unexpected IRQ trap at vector %02x\n", irq);
/*
* Currently unexpected vectors happen only on SMP and APIC.
* We _must_ ack these because every local APIC has only N
* irq slots per priority level, and a 'hanging, unacked' IRQ
* holds up an irq slot - in excessive cases (when multiple
* unexpected vectors occur) that might lock up the APIC
* completely.
* But only ack when the APIC is enabled -AK
*/
ack_APIC_irq();
}
#define irq_stats(x) (&per_cpu(irq_stat, x))
/*
* /proc/interrupts printing for arch specific interrupts
*/
int arch_show_interrupts(struct seq_file *p, int prec)
{
int j;
seq_printf(p, "%*s: ", prec, "NMI");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->__nmi_count);
seq_puts(p, " Non-maskable interrupts\n");
#ifdef CONFIG_X86_LOCAL_APIC
seq_printf(p, "%*s: ", prec, "LOC");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->apic_timer_irqs);
seq_puts(p, " Local timer interrupts\n");
seq_printf(p, "%*s: ", prec, "SPU");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_spurious_count);
seq_puts(p, " Spurious interrupts\n");
seq_printf(p, "%*s: ", prec, "PMI");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->apic_perf_irqs);
seq_puts(p, " Performance monitoring interrupts\n");
seq_printf(p, "%*s: ", prec, "IWI");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->apic_irq_work_irqs);
seq_puts(p, " IRQ work interrupts\n");
seq_printf(p, "%*s: ", prec, "RTR");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->icr_read_retry_count);
seq_puts(p, " APIC ICR read retries\n");
#endif
if (x86_platform_ipi_callback) {
seq_printf(p, "%*s: ", prec, "PLT");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->x86_platform_ipis);
seq_puts(p, " Platform interrupts\n");
}
#ifdef CONFIG_SMP
seq_printf(p, "%*s: ", prec, "RES");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count);
seq_puts(p, " Rescheduling interrupts\n");
seq_printf(p, "%*s: ", prec, "CAL");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_call_count -
irq_stats(j)->irq_tlb_count);
seq_puts(p, " Function call interrupts\n");
seq_printf(p, "%*s: ", prec, "TLB");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count);
seq_puts(p, " TLB shootdowns\n");
#endif
#ifdef CONFIG_X86_THERMAL_VECTOR
seq_printf(p, "%*s: ", prec, "TRM");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_thermal_count);
seq_puts(p, " Thermal event interrupts\n");
#endif
#ifdef CONFIG_X86_MCE_THRESHOLD
seq_printf(p, "%*s: ", prec, "THR");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count);
seq_puts(p, " Threshold APIC interrupts\n");
#endif
#ifdef CONFIG_X86_MCE
seq_printf(p, "%*s: ", prec, "MCE");
for_each_online_cpu(j)
seq_printf(p, "%10u ", per_cpu(mce_exception_count, j));
seq_puts(p, " Machine check exceptions\n");
seq_printf(p, "%*s: ", prec, "MCP");
for_each_online_cpu(j)
seq_printf(p, "%10u ", per_cpu(mce_poll_count, j));
seq_puts(p, " Machine check polls\n");
#endif
#if IS_ENABLED(CONFIG_HYPERV) || defined(CONFIG_XEN)
seq_printf(p, "%*s: ", prec, "HYP");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_hv_callback_count);
seq_puts(p, " Hypervisor callback interrupts\n");
#endif
seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
#if defined(CONFIG_X86_IO_APIC)
seq_printf(p, "%*s: %10u\n", prec, "MIS", atomic_read(&irq_mis_count));
#endif
return 0;
}
/*
* /proc/stat helpers
*/
u64 arch_irq_stat_cpu(unsigned int cpu)
{
u64 sum = irq_stats(cpu)->__nmi_count;
#ifdef CONFIG_X86_LOCAL_APIC
sum += irq_stats(cpu)->apic_timer_irqs;
sum += irq_stats(cpu)->irq_spurious_count;
sum += irq_stats(cpu)->apic_perf_irqs;
sum += irq_stats(cpu)->apic_irq_work_irqs;
sum += irq_stats(cpu)->icr_read_retry_count;
#endif
if (x86_platform_ipi_callback)
sum += irq_stats(cpu)->x86_platform_ipis;
#ifdef CONFIG_SMP
sum += irq_stats(cpu)->irq_resched_count;
sum += irq_stats(cpu)->irq_call_count;
#endif
#ifdef CONFIG_X86_THERMAL_VECTOR
sum += irq_stats(cpu)->irq_thermal_count;
#endif
#ifdef CONFIG_X86_MCE_THRESHOLD
sum += irq_stats(cpu)->irq_threshold_count;
#endif
#ifdef CONFIG_X86_MCE
sum += per_cpu(mce_exception_count, cpu);
sum += per_cpu(mce_poll_count, cpu);
#endif
return sum;
}
u64 arch_irq_stat(void)
{
u64 sum = atomic_read(&irq_err_count);
return sum;
}
/*
* do_IRQ handles all normal device IRQ's (the special
* SMP cross-CPU interrupts have their own specific
* handlers).
*/
__visible unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
/* high bit used in ret_from_ code */
unsigned vector = ~regs->orig_ax;
unsigned irq;
irq_enter();
x86: Call idle notifier after irq_enter() Interrupts notify the idle exit state before calling irq_enter(). But the notifier code calls rcu_read_lock() and this is not allowed while rcu is in an extended quiescent state. We need to wait for irq_enter() -> rcu_idle_exit() to be called before doing so otherwise this results in a grumpy RCU: [ 0.099991] WARNING: at include/linux/rcupdate.h:194 __atomic_notifier_call_chain+0xd2/0x110() [ 0.099991] Hardware name: AMD690VM-FMH [ 0.099991] Modules linked in: [ 0.099991] Pid: 0, comm: swapper Not tainted 3.0.0-rc6+ #255 [ 0.099991] Call Trace: [ 0.099991] <IRQ> [<ffffffff81051c8a>] warn_slowpath_common+0x7a/0xb0 [ 0.099991] [<ffffffff81051cd5>] warn_slowpath_null+0x15/0x20 [ 0.099991] [<ffffffff817d6fa2>] __atomic_notifier_call_chain+0xd2/0x110 [ 0.099991] [<ffffffff817d6ff1>] atomic_notifier_call_chain+0x11/0x20 [ 0.099991] [<ffffffff81001873>] exit_idle+0x43/0x50 [ 0.099991] [<ffffffff81020439>] smp_apic_timer_interrupt+0x39/0xa0 [ 0.099991] [<ffffffff817da253>] apic_timer_interrupt+0x13/0x20 [ 0.099991] <EOI> [<ffffffff8100ae67>] ? default_idle+0xa7/0x350 [ 0.099991] [<ffffffff8100ae65>] ? default_idle+0xa5/0x350 [ 0.099991] [<ffffffff8100b19b>] amd_e400_idle+0x8b/0x110 [ 0.099991] [<ffffffff810cb01f>] ? rcu_enter_nohz+0x8f/0x160 [ 0.099991] [<ffffffff810019a0>] cpu_idle+0xb0/0x110 [ 0.099991] [<ffffffff817a7505>] rest_init+0xe5/0x140 [ 0.099991] [<ffffffff817a7468>] ? rest_init+0x48/0x140 [ 0.099991] [<ffffffff81cc5ca3>] start_kernel+0x3d1/0x3dc [ 0.099991] [<ffffffff81cc5321>] x86_64_start_reservations+0x131/0x135 [ 0.099991] [<ffffffff81cc5412>] x86_64_start_kernel+0xed/0xf4 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Henroid <andrew.d.henroid@intel.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-10-08 00:22:09 +08:00
exit_idle();
irq = __this_cpu_read(vector_irq[vector]);
if (!handle_irq(irq, regs)) {
ack_APIC_irq();
x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs During heavy CPU-hotplug operations the following spurious kernel warnings can trigger: do_IRQ: No ... irq handler for vector (irq -1) [ See: https://bugzilla.kernel.org/show_bug.cgi?id=64831 ] When downing a cpu it is possible that there are unhandled irqs left in the APIC IRR register. The following code path shows how the problem can occur: 1. CPU 5 is to go down. 2. cpu_disable() on CPU 5 executes with interrupt flag cleared by local_irq_save() via stop_machine(). 3. IRQ 12 asserts on CPU 5, setting IRR but not ISR because interrupt flag is cleared (CPU unabled to handle the irq) 4. IRQs are migrated off of CPU 5, and the vectors' irqs are set to -1. 5. stop_machine() finishes cpu_disable() 6. cpu_die() for CPU 5 executes in normal context. 7. CPU 5 attempts to handle IRQ 12 because the IRR is set for IRQ 12. The code attempts to find the vector's IRQ and cannot because it has been set to -1. 8. do_IRQ() warning displays warning about CPU 5 IRQ 12. I added a debug printk to output which CPU & vector was retriggered and discovered that that we are getting bogus events. I see a 100% correlation between this debug printk in fixup_irqs() and the do_IRQ() warning. This patchset resolves this by adding definitions for VECTOR_UNDEFINED(-1) and VECTOR_RETRIGGERED(-2) and modifying the code to use them. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64831 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Rui Wang <rui.y.wang@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: janet.morgan@Intel.com Cc: tony.luck@Intel.com Cc: ruiv.wang@gmail.com Link: http://lkml.kernel.org/r/1388938252-16627-1-git-send-email-prarit@redhat.com [ Cleaned up the code a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-06 00:10:52 +08:00
if (irq != VECTOR_RETRIGGERED) {
pr_emerg_ratelimited("%s: %d.%d No irq handler for vector (irq %d)\n",
__func__, smp_processor_id(),
vector, irq);
} else {
__this_cpu_write(vector_irq[vector], VECTOR_UNDEFINED);
}
}
irq_exit();
set_irq_regs(old_regs);
return 1;
}
/*
* Handler for X86_PLATFORM_IPI_VECTOR.
*/
x86, trace: Introduce entering/exiting_irq() When implementing tracepoints in interrupt handers, if the tracepoints are simply added in the performance sensitive path of interrupt handers, it may cause potential performance problem due to the time penalty. To solve the problem, an idea is to prepare non-trace/trace irq handers and switch their IDTs at the enabling/disabling time. So, let's introduce entering_irq()/exiting_irq() for pre/post- processing of each irq handler. A way to use them is as follows. Non-trace irq handler: smp_irq_handler() { entering_irq(); /* pre-processing of this handler */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ exiting_irq(); /* post-processing of this handler */ } Trace irq_handler: smp_trace_irq_handler() { entering_irq(); /* pre-processing of this handler */ trace_irq_entry(); /* tracepoint for irq entry */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ trace_irq_exit(); /* tracepoint for irq exit */ exiting_irq(); /* post-processing of this handler */ } If tracepoints can place outside entering_irq()/exiting_irq() as follows, it looks cleaner. smp_trace_irq_handler() { trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); } But it doesn't work. The problem is with irq_enter/exit() being called. They must be called before trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before any tracepoints are used, as tracepoints use rcu to synchronize. As a possible alternative, we may be able to call irq_enter() first as follows if irq_enter() can nest. smp_trace_irq_hander() { irq_entry(); trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); irq_exit(); } But it doesn't work, either. If irq_enter() is nested, it may have a time penalty because it has to check if it was already called or not. The time penalty is not desired in performance sensitive paths even if it is tiny. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 23:45:17 +08:00
void __smp_x86_platform_ipi(void)
{
inc_irq_stat(x86_platform_ipis);
if (x86_platform_ipi_callback)
x86_platform_ipi_callback();
x86, trace: Introduce entering/exiting_irq() When implementing tracepoints in interrupt handers, if the tracepoints are simply added in the performance sensitive path of interrupt handers, it may cause potential performance problem due to the time penalty. To solve the problem, an idea is to prepare non-trace/trace irq handers and switch their IDTs at the enabling/disabling time. So, let's introduce entering_irq()/exiting_irq() for pre/post- processing of each irq handler. A way to use them is as follows. Non-trace irq handler: smp_irq_handler() { entering_irq(); /* pre-processing of this handler */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ exiting_irq(); /* post-processing of this handler */ } Trace irq_handler: smp_trace_irq_handler() { entering_irq(); /* pre-processing of this handler */ trace_irq_entry(); /* tracepoint for irq entry */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ trace_irq_exit(); /* tracepoint for irq exit */ exiting_irq(); /* post-processing of this handler */ } If tracepoints can place outside entering_irq()/exiting_irq() as follows, it looks cleaner. smp_trace_irq_handler() { trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); } But it doesn't work. The problem is with irq_enter/exit() being called. They must be called before trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before any tracepoints are used, as tracepoints use rcu to synchronize. As a possible alternative, we may be able to call irq_enter() first as follows if irq_enter() can nest. smp_trace_irq_hander() { irq_entry(); trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); irq_exit(); } But it doesn't work, either. If irq_enter() is nested, it may have a time penalty because it has to check if it was already called or not. The time penalty is not desired in performance sensitive paths even if it is tiny. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 23:45:17 +08:00
}
__visible void smp_x86_platform_ipi(struct pt_regs *regs)
x86, trace: Introduce entering/exiting_irq() When implementing tracepoints in interrupt handers, if the tracepoints are simply added in the performance sensitive path of interrupt handers, it may cause potential performance problem due to the time penalty. To solve the problem, an idea is to prepare non-trace/trace irq handers and switch their IDTs at the enabling/disabling time. So, let's introduce entering_irq()/exiting_irq() for pre/post- processing of each irq handler. A way to use them is as follows. Non-trace irq handler: smp_irq_handler() { entering_irq(); /* pre-processing of this handler */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ exiting_irq(); /* post-processing of this handler */ } Trace irq_handler: smp_trace_irq_handler() { entering_irq(); /* pre-processing of this handler */ trace_irq_entry(); /* tracepoint for irq entry */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ trace_irq_exit(); /* tracepoint for irq exit */ exiting_irq(); /* post-processing of this handler */ } If tracepoints can place outside entering_irq()/exiting_irq() as follows, it looks cleaner. smp_trace_irq_handler() { trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); } But it doesn't work. The problem is with irq_enter/exit() being called. They must be called before trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before any tracepoints are used, as tracepoints use rcu to synchronize. As a possible alternative, we may be able to call irq_enter() first as follows if irq_enter() can nest. smp_trace_irq_hander() { irq_entry(); trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); irq_exit(); } But it doesn't work, either. If irq_enter() is nested, it may have a time penalty because it has to check if it was already called or not. The time penalty is not desired in performance sensitive paths even if it is tiny. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 23:45:17 +08:00
{
struct pt_regs *old_regs = set_irq_regs(regs);
x86, trace: Introduce entering/exiting_irq() When implementing tracepoints in interrupt handers, if the tracepoints are simply added in the performance sensitive path of interrupt handers, it may cause potential performance problem due to the time penalty. To solve the problem, an idea is to prepare non-trace/trace irq handers and switch their IDTs at the enabling/disabling time. So, let's introduce entering_irq()/exiting_irq() for pre/post- processing of each irq handler. A way to use them is as follows. Non-trace irq handler: smp_irq_handler() { entering_irq(); /* pre-processing of this handler */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ exiting_irq(); /* post-processing of this handler */ } Trace irq_handler: smp_trace_irq_handler() { entering_irq(); /* pre-processing of this handler */ trace_irq_entry(); /* tracepoint for irq entry */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ trace_irq_exit(); /* tracepoint for irq exit */ exiting_irq(); /* post-processing of this handler */ } If tracepoints can place outside entering_irq()/exiting_irq() as follows, it looks cleaner. smp_trace_irq_handler() { trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); } But it doesn't work. The problem is with irq_enter/exit() being called. They must be called before trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before any tracepoints are used, as tracepoints use rcu to synchronize. As a possible alternative, we may be able to call irq_enter() first as follows if irq_enter() can nest. smp_trace_irq_hander() { irq_entry(); trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); irq_exit(); } But it doesn't work, either. If irq_enter() is nested, it may have a time penalty because it has to check if it was already called or not. The time penalty is not desired in performance sensitive paths even if it is tiny. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 23:45:17 +08:00
entering_ack_irq();
__smp_x86_platform_ipi();
exiting_irq();
set_irq_regs(old_regs);
}
#ifdef CONFIG_HAVE_KVM
/*
* Handler for POSTED_INTERRUPT_VECTOR.
*/
__visible void smp_kvm_posted_intr_ipi(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
ack_APIC_irq();
irq_enter();
exit_idle();
inc_irq_stat(kvm_posted_intr_ipis);
irq_exit();
set_irq_regs(old_regs);
}
#endif
__visible void smp_trace_x86_platform_ipi(struct pt_regs *regs)
x86, trace: Add irq vector tracepoints [Purpose of this patch] As Vaibhav explained in the thread below, tracepoints for irq vectors are useful. http://www.spinics.net/lists/mm-commits/msg85707.html <snip> The current interrupt traces from irq_handler_entry and irq_handler_exit provide when an interrupt is handled. They provide good data about when the system has switched to kernel space and how it affects the currently running processes. There are some IRQ vectors which trigger the system into kernel space, which are not handled in generic IRQ handlers. Tracing such events gives us the information about IRQ interaction with other system events. The trace also tells where the system is spending its time. We want to know which cores are handling interrupts and how they are affecting other processes in the system. Also, the trace provides information about when the cores are idle and which interrupts are changing that state. <snip> On the other hand, my usecase is tracing just local timer event and getting a value of instruction pointer. I suggested to add an argument local timer event to get instruction pointer before. But there is another way to get it with external module like systemtap. So, I don't need to add any argument to irq vector tracepoints now. [Patch Description] Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events. But there is an above use case to trace specific irq_vector rather than tracing all events. In this case, we are concerned about overhead due to unwanted events. So, add following tracepoints instead of introducing irq_vector_entry/exit. so that we can enable them independently. - local_timer_vector - reschedule_vector - call_function_vector - call_function_single_vector - irq_work_entry_vector - error_apic_vector - thermal_apic_vector - threshold_apic_vector - spurious_apic_vector - x86_platform_ipi_vector Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty makes a zero when tracepoints are disabled. Detailed explanations are as follows. - Create trace irq handlers with entering_irq()/exiting_irq(). - Create a new IDT, trace_idt_table, at boot time by adding a logic to _set_gate(). It is just a copy of original idt table. - Register the new handlers for tracpoints to the new IDT by introducing macros to alloc_intr_gate() called at registering time of irq_vector handlers. - Add checking, whether irq vector tracing is on/off, into load_current_idt(). This has to be done below debug checking for these reasons. - Switching to debug IDT may be kicked while tracing is enabled. - On the other hands, switching to trace IDT is kicked only when debugging is disabled. In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being used for other purposes. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 23:46:53 +08:00
{
struct pt_regs *old_regs = set_irq_regs(regs);
entering_ack_irq();
trace_x86_platform_ipi_entry(X86_PLATFORM_IPI_VECTOR);
__smp_x86_platform_ipi();
trace_x86_platform_ipi_exit(X86_PLATFORM_IPI_VECTOR);
exiting_irq();
set_irq_regs(old_regs);
}
EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq);
#ifdef CONFIG_HOTPLUG_CPU
/* These two declarations are only used in check_irq_vectors_for_cpu_disable()
* below, which is protected by stop_machine(). Putting them on the stack
* results in a stack frame overflow. Dynamically allocating could result in a
* failure so declare these two cpumasks as global.
*/
static struct cpumask affinity_new, online_new;
x86: Add check for number of available vectors before CPU down Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791 When a cpu is downed on a system, the irqs on the cpu are assigned to other cpus. It is possible, however, that when a cpu is downed there aren't enough free vectors on the remaining cpus to account for the vectors from the cpu that is being downed. This results in an interesting "overflow" condition where irqs are "assigned" to a CPU but are not handled. For example, when downing cpus on a 1-64 logical processor system: <snip> [ 232.021745] smpboot: CPU 61 is now offline [ 238.480275] smpboot: CPU 62 is now offline [ 245.991080] ------------[ cut here ]------------ [ 245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250() [ 246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out [ 246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas [ 246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14 [ 246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 [ 246.057371] 0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48 [ 246.065728] ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040 [ 246.074073] 0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000 [ 246.082430] Call Trace: [ 246.085174] <IRQ> [<ffffffff8164fbf6>] dump_stack+0x46/0x58 [ 246.091633] [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0 [ 246.098352] [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50 [ 246.104786] [<ffffffff815710d6>] dev_watchdog+0x246/0x250 [ 246.110923] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.119097] [<ffffffff8106092a>] call_timer_fn+0x3a/0x110 [ 246.125224] [<ffffffff8106280f>] ? update_process_times+0x6f/0x80 [ 246.132137] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.140308] [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0 [ 246.146933] [<ffffffff81059a80>] __do_softirq+0xe0/0x220 [ 246.152976] [<ffffffff8165fedc>] call_softirq+0x1c/0x30 [ 246.158920] [<ffffffff810045f5>] do_softirq+0x55/0x90 [ 246.164670] [<ffffffff81059d35>] irq_exit+0xa5/0xb0 [ 246.170227] [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60 [ 246.177324] [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70 [ 246.184041] <EOI> [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0 [ 246.191559] [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0 [ 246.198374] [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200 [ 246.204900] [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30 [ 246.210846] [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250 [ 246.217371] [<ffffffff81646b47>] rest_init+0x77/0x80 [ 246.223028] [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb [ 246.229165] [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e [ 246.235787] [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c [ 246.242990] [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc [ 246.249610] ---[ end trace fb74fdef54d79039 ]--- [ 246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout [ 246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter Last login: Mon Nov 11 08:35:14 from 10.18.17.119 [root@(none) ~]# [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX (last lines keep repeating. ixgbe driver is dead until module reload.) If the downed cpu has more vectors than are free on the remaining cpus on the system, it is possible that some vectors are "orphaned" even though they are assigned to a cpu. In this case, since the ixgbe driver had a watchdog, the watchdog fired and notified that something was wrong. This patch adds a function, check_vectors(), to compare the number of vectors on the CPU going down and compares it to the number of vectors available on the system. If there aren't enough vectors for the CPU to go down, an error is returned and propogated back to userspace. v2: Do not need to look at percpu irqs v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest Priority Mode v4: Additional changes suggested by Gong Chen. v5/v6/v7/v8: Updated comment text Signed-off-by: Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1389613861-3853-1-git-send-email-prarit@redhat.com Reviewed-by: Gong Chen <gong.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Janet Morgan <janet.morgan@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ruiv Wang <ruiv.wang@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2014-01-13 19:51:01 +08:00
/*
* This cpu is going to be removed and its vectors migrated to the remaining
* online cpus. Check to see if there are enough vectors in the remaining cpus.
* This function is protected by stop_machine().
*/
int check_irq_vectors_for_cpu_disable(void)
{
int irq, cpu;
unsigned int this_cpu, vector, this_count, count;
struct irq_desc *desc;
struct irq_data *data;
this_cpu = smp_processor_id();
cpumask_copy(&online_new, cpu_online_mask);
cpu_clear(this_cpu, online_new);
this_count = 0;
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
irq = __this_cpu_read(vector_irq[vector]);
if (irq >= 0) {
desc = irq_to_desc(irq);
x86/irq: Check for valid irq descriptor in check_irq_vectors_for_cpu_disable() When an interrupt is migrated away from a cpu it will stay in its vector_irq array until smp_irq_move_cleanup_interrupt succeeded. The cfg->move_in_progress flag is cleared already when the IPI was sent. When the interrupt is destroyed after migration its 'struct irq_desc' is freed and the vector_irq arrays are cleaned up. But since cfg->move_in_progress is already 0 the references at cpus before the last migration will not be cleared. So this would leave a reference to an already destroyed irq alive. When the cpu is taken down at this point, the check_irq_vectors_for_cpu_disable() function finds a valid irq number in the vector_irq array, but gets NULL for its descriptor and dereferences it, causing a kernel panic. This has been observed on real systems at shutdown. Add a check to check_irq_vectors_for_cpu_disable() for a valid 'struct irq_desc' to prevent this issue. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Yinghai Lu <yinghai@kernel.org> Cc: alnovak@suse.com Cc: joro@8bytes.org Link: http://lkml.kernel.org/r/20150204132754.GA10078@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-04 20:33:33 +08:00
if (!desc)
continue;
x86: Add check for number of available vectors before CPU down Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791 When a cpu is downed on a system, the irqs on the cpu are assigned to other cpus. It is possible, however, that when a cpu is downed there aren't enough free vectors on the remaining cpus to account for the vectors from the cpu that is being downed. This results in an interesting "overflow" condition where irqs are "assigned" to a CPU but are not handled. For example, when downing cpus on a 1-64 logical processor system: <snip> [ 232.021745] smpboot: CPU 61 is now offline [ 238.480275] smpboot: CPU 62 is now offline [ 245.991080] ------------[ cut here ]------------ [ 245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250() [ 246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out [ 246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas [ 246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14 [ 246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 [ 246.057371] 0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48 [ 246.065728] ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040 [ 246.074073] 0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000 [ 246.082430] Call Trace: [ 246.085174] <IRQ> [<ffffffff8164fbf6>] dump_stack+0x46/0x58 [ 246.091633] [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0 [ 246.098352] [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50 [ 246.104786] [<ffffffff815710d6>] dev_watchdog+0x246/0x250 [ 246.110923] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.119097] [<ffffffff8106092a>] call_timer_fn+0x3a/0x110 [ 246.125224] [<ffffffff8106280f>] ? update_process_times+0x6f/0x80 [ 246.132137] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.140308] [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0 [ 246.146933] [<ffffffff81059a80>] __do_softirq+0xe0/0x220 [ 246.152976] [<ffffffff8165fedc>] call_softirq+0x1c/0x30 [ 246.158920] [<ffffffff810045f5>] do_softirq+0x55/0x90 [ 246.164670] [<ffffffff81059d35>] irq_exit+0xa5/0xb0 [ 246.170227] [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60 [ 246.177324] [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70 [ 246.184041] <EOI> [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0 [ 246.191559] [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0 [ 246.198374] [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200 [ 246.204900] [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30 [ 246.210846] [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250 [ 246.217371] [<ffffffff81646b47>] rest_init+0x77/0x80 [ 246.223028] [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb [ 246.229165] [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e [ 246.235787] [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c [ 246.242990] [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc [ 246.249610] ---[ end trace fb74fdef54d79039 ]--- [ 246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout [ 246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter Last login: Mon Nov 11 08:35:14 from 10.18.17.119 [root@(none) ~]# [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX (last lines keep repeating. ixgbe driver is dead until module reload.) If the downed cpu has more vectors than are free on the remaining cpus on the system, it is possible that some vectors are "orphaned" even though they are assigned to a cpu. In this case, since the ixgbe driver had a watchdog, the watchdog fired and notified that something was wrong. This patch adds a function, check_vectors(), to compare the number of vectors on the CPU going down and compares it to the number of vectors available on the system. If there aren't enough vectors for the CPU to go down, an error is returned and propogated back to userspace. v2: Do not need to look at percpu irqs v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest Priority Mode v4: Additional changes suggested by Gong Chen. v5/v6/v7/v8: Updated comment text Signed-off-by: Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1389613861-3853-1-git-send-email-prarit@redhat.com Reviewed-by: Gong Chen <gong.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Janet Morgan <janet.morgan@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ruiv Wang <ruiv.wang@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2014-01-13 19:51:01 +08:00
data = irq_desc_get_irq_data(desc);
cpumask_copy(&affinity_new, data->affinity);
cpu_clear(this_cpu, affinity_new);
/* Do not count inactive or per-cpu irqs. */
if (!irq_has_action(irq) || irqd_is_per_cpu(data))
continue;
/*
* A single irq may be mapped to multiple
* cpu's vector_irq[] (for example IOAPIC cluster
* mode). In this case we have two
* possibilities:
*
* 1) the resulting affinity mask is empty; that is
* this the down'd cpu is the last cpu in the irq's
* affinity mask, or
*
* 2) the resulting affinity mask is no longer
* a subset of the online cpus but the affinity
* mask is not zero; that is the down'd cpu is the
* last online cpu in a user set affinity mask.
*/
if (cpumask_empty(&affinity_new) ||
!cpumask_subset(&affinity_new, &online_new))
this_count++;
}
}
count = 0;
for_each_online_cpu(cpu) {
if (cpu == this_cpu)
continue;
/*
* We scan from FIRST_EXTERNAL_VECTOR to first system
* vector. If the vector is marked in the used vectors
* bitmap or an irq is assigned to it, we don't count
* it as available.
*/
for (vector = FIRST_EXTERNAL_VECTOR;
vector < first_system_vector; vector++) {
if (!test_bit(vector, used_vectors) &&
per_cpu(vector_irq, cpu)[vector] < 0)
count++;
x86: Add check for number of available vectors before CPU down Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791 When a cpu is downed on a system, the irqs on the cpu are assigned to other cpus. It is possible, however, that when a cpu is downed there aren't enough free vectors on the remaining cpus to account for the vectors from the cpu that is being downed. This results in an interesting "overflow" condition where irqs are "assigned" to a CPU but are not handled. For example, when downing cpus on a 1-64 logical processor system: <snip> [ 232.021745] smpboot: CPU 61 is now offline [ 238.480275] smpboot: CPU 62 is now offline [ 245.991080] ------------[ cut here ]------------ [ 245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250() [ 246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out [ 246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas [ 246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14 [ 246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 [ 246.057371] 0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48 [ 246.065728] ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040 [ 246.074073] 0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000 [ 246.082430] Call Trace: [ 246.085174] <IRQ> [<ffffffff8164fbf6>] dump_stack+0x46/0x58 [ 246.091633] [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0 [ 246.098352] [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50 [ 246.104786] [<ffffffff815710d6>] dev_watchdog+0x246/0x250 [ 246.110923] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.119097] [<ffffffff8106092a>] call_timer_fn+0x3a/0x110 [ 246.125224] [<ffffffff8106280f>] ? update_process_times+0x6f/0x80 [ 246.132137] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.140308] [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0 [ 246.146933] [<ffffffff81059a80>] __do_softirq+0xe0/0x220 [ 246.152976] [<ffffffff8165fedc>] call_softirq+0x1c/0x30 [ 246.158920] [<ffffffff810045f5>] do_softirq+0x55/0x90 [ 246.164670] [<ffffffff81059d35>] irq_exit+0xa5/0xb0 [ 246.170227] [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60 [ 246.177324] [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70 [ 246.184041] <EOI> [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0 [ 246.191559] [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0 [ 246.198374] [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200 [ 246.204900] [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30 [ 246.210846] [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250 [ 246.217371] [<ffffffff81646b47>] rest_init+0x77/0x80 [ 246.223028] [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb [ 246.229165] [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e [ 246.235787] [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c [ 246.242990] [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc [ 246.249610] ---[ end trace fb74fdef54d79039 ]--- [ 246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout [ 246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter Last login: Mon Nov 11 08:35:14 from 10.18.17.119 [root@(none) ~]# [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX (last lines keep repeating. ixgbe driver is dead until module reload.) If the downed cpu has more vectors than are free on the remaining cpus on the system, it is possible that some vectors are "orphaned" even though they are assigned to a cpu. In this case, since the ixgbe driver had a watchdog, the watchdog fired and notified that something was wrong. This patch adds a function, check_vectors(), to compare the number of vectors on the CPU going down and compares it to the number of vectors available on the system. If there aren't enough vectors for the CPU to go down, an error is returned and propogated back to userspace. v2: Do not need to look at percpu irqs v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest Priority Mode v4: Additional changes suggested by Gong Chen. v5/v6/v7/v8: Updated comment text Signed-off-by: Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1389613861-3853-1-git-send-email-prarit@redhat.com Reviewed-by: Gong Chen <gong.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Janet Morgan <janet.morgan@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ruiv Wang <ruiv.wang@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2014-01-13 19:51:01 +08:00
}
}
if (count < this_count) {
pr_warn("CPU %d disable failed: CPU has %u vectors assigned and there are only %u available.\n",
this_cpu, this_count, count);
return -ERANGE;
}
return 0;
}
/* A cpu has been removed from cpu_online_mask. Reset irq affinities. */
void fixup_irqs(void)
{
unsigned int irq, vector;
static int warned;
struct irq_desc *desc;
struct irq_data *data;
struct irq_chip *chip;
x86/irq: Fix fixup_irqs() error handling Several patches to fix cpu hotplug and the down'd cpu's irq relocations have been submitted in the past month or so. The patches should resolve the problems with cpu hotplug and irq relocation, however, there is always a possibility that a bug still exists. The big problem with debugging these irq reassignments is that the cpu down completes and then we get random stack traces from drivers for which irqs have not been properly assigned to a new cpu. The stack traces are a mix of storage, network, and other kernel subsystem (I once saw the serial port stop working ...) warnings and failures. The problem with these failures is that they are difficult to diagnose. There is no warning in the cpu hotplug down path to indicate that an IRQ has failed to be assigned to a new cpu, and all we are left with is a stack trace from a driver, or a non-functional device. If we had some information on the console debugging these situations would be much easier; after all we can map an IRQ to a device by simply using lspci or /proc/interrupts. The current code, fixup_irqs(), which migrates IRQs from the down'd cpu and is called close to the end of the cpu down path, calls chip->set_irq_affinity which eventually calls __assign_irq_vector(). Errors are not propogated back from this function call and this results in silent irq relocation failures. This patch fixes this issue by returning the error codes up the call stack and prints out a warning if there is a relocation failure. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Rui Wang <rui.y.wang@intel.com> Cc: Liu Ping Fan <kernelfans@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org> Cc: Li Fei <fei.li@intel.com> Cc: gong.chen@linux.intel.com Link: http://lkml.kernel.org/r/1396440673-18286-1-git-send-email-prarit@redhat.com [ Made small cleanliness tweaks. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-02 20:11:13 +08:00
int ret;
for_each_irq_desc(irq, desc) {
int break_affinity = 0;
int set_affinity = 1;
const struct cpumask *affinity;
if (!desc)
continue;
if (irq == 2)
continue;
/* interrupt's are disabled at this point */
raw_spin_lock(&desc->lock);
data = irq_desc_get_irq_data(desc);
affinity = data->affinity;
if (!irq_has_action(irq) || irqd_is_per_cpu(data) ||
cpumask_subset(affinity, cpu_online_mask)) {
raw_spin_unlock(&desc->lock);
continue;
}
/*
* Complete the irq move. This cpu is going down and for
* non intr-remapping case, we can't wait till this interrupt
* arrives at this cpu before completing the irq move.
*/
irq_force_complete_move(irq);
if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
break_affinity = 1;
affinity = cpu_online_mask;
}
chip = irq_data_get_irq_chip(data);
if (!irqd_can_move_in_process_context(data) && chip->irq_mask)
chip->irq_mask(data);
x86/irq: Fix fixup_irqs() error handling Several patches to fix cpu hotplug and the down'd cpu's irq relocations have been submitted in the past month or so. The patches should resolve the problems with cpu hotplug and irq relocation, however, there is always a possibility that a bug still exists. The big problem with debugging these irq reassignments is that the cpu down completes and then we get random stack traces from drivers for which irqs have not been properly assigned to a new cpu. The stack traces are a mix of storage, network, and other kernel subsystem (I once saw the serial port stop working ...) warnings and failures. The problem with these failures is that they are difficult to diagnose. There is no warning in the cpu hotplug down path to indicate that an IRQ has failed to be assigned to a new cpu, and all we are left with is a stack trace from a driver, or a non-functional device. If we had some information on the console debugging these situations would be much easier; after all we can map an IRQ to a device by simply using lspci or /proc/interrupts. The current code, fixup_irqs(), which migrates IRQs from the down'd cpu and is called close to the end of the cpu down path, calls chip->set_irq_affinity which eventually calls __assign_irq_vector(). Errors are not propogated back from this function call and this results in silent irq relocation failures. This patch fixes this issue by returning the error codes up the call stack and prints out a warning if there is a relocation failure. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Rui Wang <rui.y.wang@intel.com> Cc: Liu Ping Fan <kernelfans@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org> Cc: Li Fei <fei.li@intel.com> Cc: gong.chen@linux.intel.com Link: http://lkml.kernel.org/r/1396440673-18286-1-git-send-email-prarit@redhat.com [ Made small cleanliness tweaks. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-02 20:11:13 +08:00
if (chip->irq_set_affinity) {
ret = chip->irq_set_affinity(data, affinity, true);
if (ret == -ENOSPC)
pr_crit("IRQ %d set affinity failed because there are no available vectors. The device assigned to this IRQ is unstable.\n", irq);
} else {
if (!(warned++))
set_affinity = 0;
}
/*
* We unmask if the irq was not marked masked by the
* core code. That respects the lazy irq disable
* behaviour.
*/
if (!irqd_can_move_in_process_context(data) &&
!irqd_irq_masked(data) && chip->irq_unmask)
chip->irq_unmask(data);
raw_spin_unlock(&desc->lock);
if (break_affinity && set_affinity)
pr_notice("Broke affinity for irq %i\n", irq);
else if (!set_affinity)
pr_notice("Cannot set affinity for irq %i\n", irq);
}
/*
* We can remove mdelay() and then send spuriuous interrupts to
* new cpu targets for all the irqs that were handled previously by
* this cpu. While it works, I have seen spurious interrupt messages
* (nothing wrong but still...).
*
* So for now, retain mdelay(1) and check the IRR and then send those
* interrupts to new targets as this cpu is already offlined...
*/
mdelay(1);
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
unsigned int irr;
x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs During heavy CPU-hotplug operations the following spurious kernel warnings can trigger: do_IRQ: No ... irq handler for vector (irq -1) [ See: https://bugzilla.kernel.org/show_bug.cgi?id=64831 ] When downing a cpu it is possible that there are unhandled irqs left in the APIC IRR register. The following code path shows how the problem can occur: 1. CPU 5 is to go down. 2. cpu_disable() on CPU 5 executes with interrupt flag cleared by local_irq_save() via stop_machine(). 3. IRQ 12 asserts on CPU 5, setting IRR but not ISR because interrupt flag is cleared (CPU unabled to handle the irq) 4. IRQs are migrated off of CPU 5, and the vectors' irqs are set to -1. 5. stop_machine() finishes cpu_disable() 6. cpu_die() for CPU 5 executes in normal context. 7. CPU 5 attempts to handle IRQ 12 because the IRR is set for IRQ 12. The code attempts to find the vector's IRQ and cannot because it has been set to -1. 8. do_IRQ() warning displays warning about CPU 5 IRQ 12. I added a debug printk to output which CPU & vector was retriggered and discovered that that we are getting bogus events. I see a 100% correlation between this debug printk in fixup_irqs() and the do_IRQ() warning. This patchset resolves this by adding definitions for VECTOR_UNDEFINED(-1) and VECTOR_RETRIGGERED(-2) and modifying the code to use them. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64831 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Rui Wang <rui.y.wang@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: janet.morgan@Intel.com Cc: tony.luck@Intel.com Cc: ruiv.wang@gmail.com Link: http://lkml.kernel.org/r/1388938252-16627-1-git-send-email-prarit@redhat.com [ Cleaned up the code a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-06 00:10:52 +08:00
if (__this_cpu_read(vector_irq[vector]) <= VECTOR_UNDEFINED)
continue;
irr = apic_read(APIC_IRR + (vector / 32 * 0x10));
if (irr & (1 << (vector % 32))) {
irq = __this_cpu_read(vector_irq[vector]);
desc = irq_to_desc(irq);
data = irq_desc_get_irq_data(desc);
chip = irq_data_get_irq_chip(data);
raw_spin_lock(&desc->lock);
x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs During heavy CPU-hotplug operations the following spurious kernel warnings can trigger: do_IRQ: No ... irq handler for vector (irq -1) [ See: https://bugzilla.kernel.org/show_bug.cgi?id=64831 ] When downing a cpu it is possible that there are unhandled irqs left in the APIC IRR register. The following code path shows how the problem can occur: 1. CPU 5 is to go down. 2. cpu_disable() on CPU 5 executes with interrupt flag cleared by local_irq_save() via stop_machine(). 3. IRQ 12 asserts on CPU 5, setting IRR but not ISR because interrupt flag is cleared (CPU unabled to handle the irq) 4. IRQs are migrated off of CPU 5, and the vectors' irqs are set to -1. 5. stop_machine() finishes cpu_disable() 6. cpu_die() for CPU 5 executes in normal context. 7. CPU 5 attempts to handle IRQ 12 because the IRR is set for IRQ 12. The code attempts to find the vector's IRQ and cannot because it has been set to -1. 8. do_IRQ() warning displays warning about CPU 5 IRQ 12. I added a debug printk to output which CPU & vector was retriggered and discovered that that we are getting bogus events. I see a 100% correlation between this debug printk in fixup_irqs() and the do_IRQ() warning. This patchset resolves this by adding definitions for VECTOR_UNDEFINED(-1) and VECTOR_RETRIGGERED(-2) and modifying the code to use them. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64831 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Rui Wang <rui.y.wang@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: janet.morgan@Intel.com Cc: tony.luck@Intel.com Cc: ruiv.wang@gmail.com Link: http://lkml.kernel.org/r/1388938252-16627-1-git-send-email-prarit@redhat.com [ Cleaned up the code a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-06 00:10:52 +08:00
if (chip->irq_retrigger) {
chip->irq_retrigger(data);
x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs During heavy CPU-hotplug operations the following spurious kernel warnings can trigger: do_IRQ: No ... irq handler for vector (irq -1) [ See: https://bugzilla.kernel.org/show_bug.cgi?id=64831 ] When downing a cpu it is possible that there are unhandled irqs left in the APIC IRR register. The following code path shows how the problem can occur: 1. CPU 5 is to go down. 2. cpu_disable() on CPU 5 executes with interrupt flag cleared by local_irq_save() via stop_machine(). 3. IRQ 12 asserts on CPU 5, setting IRR but not ISR because interrupt flag is cleared (CPU unabled to handle the irq) 4. IRQs are migrated off of CPU 5, and the vectors' irqs are set to -1. 5. stop_machine() finishes cpu_disable() 6. cpu_die() for CPU 5 executes in normal context. 7. CPU 5 attempts to handle IRQ 12 because the IRR is set for IRQ 12. The code attempts to find the vector's IRQ and cannot because it has been set to -1. 8. do_IRQ() warning displays warning about CPU 5 IRQ 12. I added a debug printk to output which CPU & vector was retriggered and discovered that that we are getting bogus events. I see a 100% correlation between this debug printk in fixup_irqs() and the do_IRQ() warning. This patchset resolves this by adding definitions for VECTOR_UNDEFINED(-1) and VECTOR_RETRIGGERED(-2) and modifying the code to use them. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64831 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Rui Wang <rui.y.wang@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: janet.morgan@Intel.com Cc: tony.luck@Intel.com Cc: ruiv.wang@gmail.com Link: http://lkml.kernel.org/r/1388938252-16627-1-git-send-email-prarit@redhat.com [ Cleaned up the code a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-06 00:10:52 +08:00
__this_cpu_write(vector_irq[vector], VECTOR_RETRIGGERED);
}
raw_spin_unlock(&desc->lock);
}
x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs During heavy CPU-hotplug operations the following spurious kernel warnings can trigger: do_IRQ: No ... irq handler for vector (irq -1) [ See: https://bugzilla.kernel.org/show_bug.cgi?id=64831 ] When downing a cpu it is possible that there are unhandled irqs left in the APIC IRR register. The following code path shows how the problem can occur: 1. CPU 5 is to go down. 2. cpu_disable() on CPU 5 executes with interrupt flag cleared by local_irq_save() via stop_machine(). 3. IRQ 12 asserts on CPU 5, setting IRR but not ISR because interrupt flag is cleared (CPU unabled to handle the irq) 4. IRQs are migrated off of CPU 5, and the vectors' irqs are set to -1. 5. stop_machine() finishes cpu_disable() 6. cpu_die() for CPU 5 executes in normal context. 7. CPU 5 attempts to handle IRQ 12 because the IRR is set for IRQ 12. The code attempts to find the vector's IRQ and cannot because it has been set to -1. 8. do_IRQ() warning displays warning about CPU 5 IRQ 12. I added a debug printk to output which CPU & vector was retriggered and discovered that that we are getting bogus events. I see a 100% correlation between this debug printk in fixup_irqs() and the do_IRQ() warning. This patchset resolves this by adding definitions for VECTOR_UNDEFINED(-1) and VECTOR_RETRIGGERED(-2) and modifying the code to use them. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64831 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Rui Wang <rui.y.wang@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: janet.morgan@Intel.com Cc: tony.luck@Intel.com Cc: ruiv.wang@gmail.com Link: http://lkml.kernel.org/r/1388938252-16627-1-git-send-email-prarit@redhat.com [ Cleaned up the code a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-06 00:10:52 +08:00
if (__this_cpu_read(vector_irq[vector]) != VECTOR_RETRIGGERED)
__this_cpu_write(vector_irq[vector], VECTOR_UNDEFINED);
}
}
#endif