openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/x86/mm/Makefile

38 lines
1.1 KiB
Makefile
Raw Normal View History

x86: unify free_init_pages() and free_initmem() Impact: unification This patch introduces a common arch/x86/mm/init.c and moves the identical free_init_pages() and free_initmem() functions to the file. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> LKML-Reference: <1236078906.2675.18.camel@penberg-laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-03 19:15:06 +08:00
obj-y := init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
x86: split NX setup into separate file to limit unstack-protected code Move the NX setup into a separate file so that it can be compiled without stack-protection while leaving the rest of the mm/init code protected. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-09-22 04:40:42 +08:00
pat.o pgtable.o physaddr.o gup.o setup_nx.o
x86: unify arch/x86/mm/Makefile Unify arch/x86/mm/Makefile between 32 and 64 bits. All configuration variables that are protected by Kconfig constraints have been put in the common part of the Makefile; however, the NUMA files are totally different between 32 and 64 bits and are handled via an ifdef. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 23:40:45 +08:00
xen: make -fstack-protector work under Xen -fstack-protector uses a special per-cpu "stack canary" value. gcc generates special code in each function to test the canary to make sure that the function's stack hasn't been overrun. On x86-64, this is simply an offset of %gs, which is the usual per-cpu base segment register, so setting it up simply requires loading %gs's base as normal. On i386, the stack protector segment is %gs (rather than the usual kernel percpu %fs segment register). This requires setting up the full kernel GDT and then loading %gs accordingly. We also need to make sure %gs is initialized when bringing up secondary cpus too. To keep things consistent, we do the full GDT/segment register setup on both architectures. Because we need to avoid -fstack-protected code before setting up the GDT and because there's no way to disable it on a per-function basis, several files need to have stack-protector inhibited. [ Impact: allow Xen booting with stack-protector enabled ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-08-28 03:46:35 +08:00
# Make sure __phys_addr has no stackprotector
nostackp := $(call cc-option, -fno-stack-protector)
x86: split __phys_addr out into separate file Split __phys_addr out into its own file so we can disable -fstack-protector in a fine-grained fashion. Also it doesn't have terribly much to do with the rest of ioremap.c. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-09-11 01:09:38 +08:00
CFLAGS_physaddr.o := $(nostackp)
x86: split NX setup into separate file to limit unstack-protected code Move the NX setup into a separate file so that it can be compiled without stack-protection while leaving the rest of the mm/init code protected. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-09-22 04:40:42 +08:00
CFLAGS_setup_nx.o := $(nostackp)
xen: make -fstack-protector work under Xen -fstack-protector uses a special per-cpu "stack canary" value. gcc generates special code in each function to test the canary to make sure that the function's stack hasn't been overrun. On x86-64, this is simply an offset of %gs, which is the usual per-cpu base segment register, so setting it up simply requires loading %gs's base as normal. On i386, the stack protector segment is %gs (rather than the usual kernel percpu %fs segment register). This requires setting up the full kernel GDT and then loading %gs accordingly. We also need to make sure %gs is initialized when bringing up secondary cpus too. To keep things consistent, we do the full GDT/segment register setup on both architectures. Because we need to avoid -fstack-protected code before setting up the GDT and because there's no way to disable it on a per-function basis, several files need to have stack-protector inhibited. [ Impact: allow Xen booting with stack-protector enabled ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-08-28 03:46:35 +08:00
x86, trace: Add page fault tracepoints This patch introduces page fault tracepoints to x86 architecture by switching IDT. Two events, for user and kernel spaces, are introduced at the beginning of page fault handler for tracing. - User space event There is a request of page fault event for user space as below. https://lkml.kernel.org/r/1368079520-11015-2-git-send-email-fdeslaur+()+gmail+!+com https://lkml.kernel.org/r/1368079520-11015-1-git-send-email-fdeslaur+()+gmail+!+com - Kernel space event: When we measure an overhead in kernel space for investigating performance issues, we can check if it comes from the page fault events. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/52716E67.6090705@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-10-31 04:39:03 +08:00
CFLAGS_fault.o := -I$(src)/../include/asm/trace
x86, pat: Migrate to rbtree only backend for pat memtype management Move pat backend to fully rbtree based implementation from the existing rbtree and linked list hybrid. New rbtree based solution uses interval trees (augmented rbtrees) in order to store the PAT ranges. The new code seprates out the pat backend to pat_rbtree.c file, making is cleaner. The change also makes the PAT lookup, reserve and free operations more optimal, as we don't have to traverse linear linked list of few tens of entries in normal case. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> LKML-Reference: <20100210232607.GB11465@linux-os.sc.intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11 07:26:07 +08:00
obj-$(CONFIG_X86_PAT) += pat_rbtree.o
x86: replace CONFIG_X86_SMP with CONFIG_SMP The x86/Voyager subarch used to have this distinction between 'x86 SMP support' and 'Voyager SMP support': config X86_SMP bool depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64) This is a pointless distinction - Voyager can (and already does) use smp_ops to implement various SMP quirks it has - and it can be extended more to cover all the specialities of Voyager. So remove this complication in the Kconfig space. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 00:07:08 +08:00
obj-$(CONFIG_SMP) += tlb.o
x86, mm: move tlb.c to arch/x86/mm/ Impact: cleanup Now that it's unified, move the (SMP) TLB flushing code from arch/x86/kernel/ to arch/x86/mm/, where it belongs logically. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 17:08:53 +08:00
x86: add iomap_atomic*()/iounmap_atomic() on 32-bit using fixmaps Impact: introduce new APIs, separate kmap code from CONFIG_HIGHMEM This takes the code used for CONFIG_HIGHMEM memory mappings except that it's designed for dynamic IO resource mapping. These fixmaps are available even with CONFIG_HIGHMEM turned off. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 10:37:09 +08:00
obj-$(CONFIG_X86_32) += pgtable_32.o iomap_32.o
x86: unify arch/x86/mm/Makefile Unify arch/x86/mm/Makefile between 32 and 64 bits. All configuration variables that are protected by Kconfig constraints have been put in the common part of the Makefile; however, the NUMA files are totally different between 32 and 64 bits and are handled via an ifdef. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 23:40:45 +08:00
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
x86: clean up the page table dumper and add 32-bit support Clean up the page table dumper (fix boundary conditions, table driven address ranges, some formatting changes since it is no longer using the kernel log but a separate virtual file), and generalize to 32 bits. [ mingo@elte.hu: x86: fix the pagetable dumper ] Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 23:40:45 +08:00
obj-$(CONFIG_X86_PTDUMP) += dump_pagetables.o
x86: unify arch/x86/mm/Makefile Unify arch/x86/mm/Makefile between 32 and 64 bits. All configuration variables that are protected by Kconfig constraints have been put in the common part of the Makefile; however, the NUMA files are totally different between 32 and 64 bits and are handled via an ifdef. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 23:40:45 +08:00
obj-$(CONFIG_HIGHMEM) += highmem_32.o
kmemcheck: add the kmemcheck core General description: kmemcheck is a patch to the linux kernel that detects use of uninitialized memory. It does this by trapping every read and write to memory that was allocated dynamically (e.g. using kmalloc()). If a memory address is read that has not previously been written to, a message is printed to the kernel log. Thanks to Andi Kleen for the set_memory_4k() solution. Andrew Morton suggested documenting the shadow member of struct page. Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> [export kmemcheck_mark_initialized] [build fix for setup_max_cpus] Signed-off-by: Ingo Molnar <mingo@elte.hu> [rebased for mainline inclusion] Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no>
2008-04-04 06:51:41 +08:00
obj-$(CONFIG_KMEMCHECK) += kmemcheck/
x86_64: add KASan support This patch adds arch specific code for kernel address sanitizer. 16TB of virtual addressed used for shadow memory. It's located in range [ffffec0000000000 - fffffc0000000000] between vmemmap and %esp fixup stacks. At early stage we map whole shadow region with zero page. Latter, after pages mapped to direct mapping address range we unmap zero pages from corresponding shadow (see kasan_map_shadow()) and allocate and map a real shadow memory reusing vmemmap_populate() function. Also replace __pa with __pa_nodebug before shadow initialized. __pa with CONFIG_DEBUG_VIRTUAL=y make external function call (__phys_addr) __phys_addr is instrumented, so __asan_load could be called before shadow area initialized. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Jim Davis <jim.epost@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14 06:39:25 +08:00
KASAN_SANITIZE_kasan_init_$(BITS).o := n
obj-$(CONFIG_KASAN) += kasan_init_$(BITS).o
x86 mmiotrace: move files into arch/x86/mm/. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 03:20:59 +08:00
obj-$(CONFIG_MMIOTRACE) += mmiotrace.o
trace: add the MMIO-tracer to the tracer menu, cleanup Impact: cleanup We can remove MMIOTRACE_HOOKS and replace it with just MMIOTRACE. MMIOTRACE_HOOKS is a remnant from the time when I thought that something else could also use the kmmio facilities. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-25 01:08:11 +08:00
mmiotrace-y := kmmio.o pf_in.o mmio-mod.o
x86 mmiotrace: move files into arch/x86/mm/. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 03:20:59 +08:00
obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o
x86: unify 32 and 64-bit node_to_cpumask_map Impact: cleanup We take the 64-bit code and use it on 32-bit as well. The new file is called mm/numa.c. In a minor cleanup, we use cpu_none_mask instead of declaring a local cpu_mask_none. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 12:19:52 +08:00
obj-$(CONFIG_NUMA) += numa.o numa_$(BITS).o
x86, NUMA: Rename amdtopology_64.c to amdtopology.c amdtopology is going to be used by 32bit too drop _64 suffix. This is pure rename. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02 23:24:48 +08:00
obj-$(CONFIG_AMD_NUMA) += amdtopology.o
x86-32, NUMA: Replace srat_32.c with srat.c SRAT support implementation in srat_32.c and srat.c are generally similar; however, there are some differences. First of all, 64bit implementation supports more types of SRAT entries. 64bit supports x2apic, affinity, memory and SLIT. 32bit only supports processor and memory. Most other differences stem from different initialization protocols employed by 64bit and 32bit NUMA init paths. On 64bit, * Mappings among PXM, node and apicid are directly done in each SRAT entry callback. * Memory affinity information is passed to numa_add_memblk() which takes care of all interfacing with NUMA init. * Doesn't directly initialize NUMA configurations. All the information is recorded in numa_nodes_parsed and memblks. On 32bit, * Checks numa_off. * Things go through one more level of indirection via private tables but eventually end up initializing the same mappings. * node_start/end_pfn[] are initialized and memblock_x86_register_active_regions() is called for each memory chunk. * node_set_online() is called for each online node. * sort_node_map() is called. There are also other minor differences in sanity checking and messages but taking 64bit version should be good enough. This patch drops the 32bit specific implementation and makes the 64bit implementation common for both 32 and 64bit. The init protocol differences are dealt with in two places - the numa_add_memblk() shim added in the previous patch and new temporary numa_32.c:get_memcfg_from_srat() which wraps invocation of x86_acpi_numa_init(). The shim numa_add_memblk() handles the folowings. * node_start/end_pfn[] initialization. * node_set_online() for memory nodes. * Invocation of memblock_x86_register_active_regions(). The shim get_memcfg_from_srat() handles the followings. * numa_off check. * node_set_online() for CPU nodes. * sort_node_map() invocation. * Clearing of numa_nodes_parsed and active_ranges on failure. The shims are temporary and will be removed as the generic NUMA init path in 32bit is replaced with 64bit one. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02 20:18:53 +08:00
obj-$(CONFIG_ACPI_NUMA) += srat.o
x86-64, NUMA: Move NUMA emulation into numa_emulation.c Create numa_emulation.c and move all NUMA emulation code there. The definitions of struct numa_memblk and numa_meminfo are moved to numa_64.h. Also, numa_remove_memblk_from(), numa_cleanup_meminfo(), numa_reset_distance() along with numa_emulation() are made global. - v2: Internal declarations moved to numa_internal.h as suggested by Yinghai. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com>
2011-02-22 18:10:08 +08:00
obj-$(CONFIG_NUMA_EMU) += numa_emulation.o
x86: remove acpi_srat config v2 use ACPI_NUMA directly and move srat_32.c to mm/ Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-07 02:42:11 +08:00
x86: seperate memtest from init_64.c it's separate functionality that deserves its own file. This also prepares 32-bit memtest support. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 15:02:28 +08:00
obj-$(CONFIG_MEMTEST) += memtest.o
x86, mpx: Add MPX-specific mmap interface We have chosen to perform the allocation of bounds tables in kernel (See the patch "on-demand kernel allocation of bounds tables") and to mark these VMAs with VM_MPX. However, there is currently no suitable interface to actually do this. Existing interfaces, like do_mmap_pgoff(), have no way to set a modified ->vm_ops or ->vm_flags and don't hold mmap_sem long enough to let a caller do it. This patch wraps mmap_region() and hold mmap_sem long enough to make the modifications to the VMA which we need. Also note the 32/64-bit #ifdef in the header. We actually need to do this at runtime eventually. But, for now, we don't support running 32-bit binaries on 64-bit kernels. Support for this will come in later patches. Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-mm@kvack.org Cc: linux-mips@linux-mips.org Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20141114151827.CE440F67@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 23:18:27 +08:00
obj-$(CONFIG_X86_INTEL_MPX) += mpx.o