linux/sound/firewire/fireworks/fireworks_proc.c

233 lines
6.7 KiB
C
Raw Normal View History

/*
* fireworks_proc.c - a part of driver for Fireworks based devices
*
* Copyright (c) 2009-2010 Clemens Ladisch
* Copyright (c) 2013-2014 Takashi Sakamoto
*
* Licensed under the terms of the GNU General Public License, version 2.
*/
#include "./fireworks.h"
static inline const char*
get_phys_name(struct snd_efw_phys_grp *grp, bool input)
{
static const char *const ch_type[] = {
"Analog", "S/PDIF", "ADAT", "S/PDIF or ADAT", "Mirroring",
"Headphones", "I2S", "Guitar", "Pirzo Guitar", "Guitar String",
};
if (grp->type < ARRAY_SIZE(ch_type))
return ch_type[grp->type];
else if (input)
return "Input";
else
return "Output";
}
static void
proc_read_hwinfo(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
{
struct snd_efw *efw = entry->private_data;
unsigned short i;
struct snd_efw_hwinfo *hwinfo;
hwinfo = kmalloc(sizeof(struct snd_efw_hwinfo), GFP_KERNEL);
if (hwinfo == NULL)
return;
if (snd_efw_command_get_hwinfo(efw, hwinfo) < 0)
goto end;
snd_iprintf(buffer, "guid_hi: 0x%X\n", hwinfo->guid_hi);
snd_iprintf(buffer, "guid_lo: 0x%X\n", hwinfo->guid_lo);
snd_iprintf(buffer, "type: 0x%X\n", hwinfo->type);
snd_iprintf(buffer, "version: 0x%X\n", hwinfo->version);
snd_iprintf(buffer, "vendor_name: %s\n", hwinfo->vendor_name);
snd_iprintf(buffer, "model_name: %s\n", hwinfo->model_name);
snd_iprintf(buffer, "dsp_version: 0x%X\n", hwinfo->dsp_version);
snd_iprintf(buffer, "arm_version: 0x%X\n", hwinfo->arm_version);
snd_iprintf(buffer, "fpga_version: 0x%X\n", hwinfo->fpga_version);
snd_iprintf(buffer, "flags: 0x%X\n", hwinfo->flags);
snd_iprintf(buffer, "max_sample_rate: 0x%X\n", hwinfo->max_sample_rate);
snd_iprintf(buffer, "min_sample_rate: 0x%X\n", hwinfo->min_sample_rate);
snd_iprintf(buffer, "supported_clock: 0x%X\n",
hwinfo->supported_clocks);
snd_iprintf(buffer, "phys out: 0x%X\n", hwinfo->phys_out);
snd_iprintf(buffer, "phys in: 0x%X\n", hwinfo->phys_in);
snd_iprintf(buffer, "phys in grps: 0x%X\n",
hwinfo->phys_in_grp_count);
for (i = 0; i < hwinfo->phys_in_grp_count; i++) {
snd_iprintf(buffer,
"phys in grp[%d]: type 0x%X, count 0x%X\n",
i, hwinfo->phys_out_grps[i].type,
hwinfo->phys_out_grps[i].count);
}
snd_iprintf(buffer, "phys out grps: 0x%X\n",
hwinfo->phys_out_grp_count);
for (i = 0; i < hwinfo->phys_out_grp_count; i++) {
snd_iprintf(buffer,
"phys out grps[%d]: type 0x%X, count 0x%X\n",
i, hwinfo->phys_out_grps[i].type,
hwinfo->phys_out_grps[i].count);
}
snd_iprintf(buffer, "amdtp rx pcm channels 1x: 0x%X\n",
hwinfo->amdtp_rx_pcm_channels);
snd_iprintf(buffer, "amdtp tx pcm channels 1x: 0x%X\n",
hwinfo->amdtp_tx_pcm_channels);
snd_iprintf(buffer, "amdtp rx pcm channels 2x: 0x%X\n",
hwinfo->amdtp_rx_pcm_channels_2x);
snd_iprintf(buffer, "amdtp tx pcm channels 2x: 0x%X\n",
hwinfo->amdtp_tx_pcm_channels_2x);
snd_iprintf(buffer, "amdtp rx pcm channels 4x: 0x%X\n",
hwinfo->amdtp_rx_pcm_channels_4x);
snd_iprintf(buffer, "amdtp tx pcm channels 4x: 0x%X\n",
hwinfo->amdtp_tx_pcm_channels_4x);
snd_iprintf(buffer, "midi out ports: 0x%X\n", hwinfo->midi_out_ports);
snd_iprintf(buffer, "midi in ports: 0x%X\n", hwinfo->midi_in_ports);
snd_iprintf(buffer, "mixer playback channels: 0x%X\n",
hwinfo->mixer_playback_channels);
snd_iprintf(buffer, "mixer capture channels: 0x%X\n",
hwinfo->mixer_capture_channels);
end:
kfree(hwinfo);
}
static void
proc_read_clock(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
{
struct snd_efw *efw = entry->private_data;
enum snd_efw_clock_source clock_source;
unsigned int sampling_rate;
if (snd_efw_command_get_clock_source(efw, &clock_source) < 0)
return;
if (snd_efw_command_get_sampling_rate(efw, &sampling_rate) < 0)
return;
snd_iprintf(buffer, "Clock Source: %d\n", clock_source);
snd_iprintf(buffer, "Sampling Rate: %d\n", sampling_rate);
}
/*
* NOTE:
* dB = 20 * log10(linear / 0x01000000)
* -144.0 dB when linear is 0
*/
static void
proc_read_phys_meters(struct snd_info_entry *entry,
struct snd_info_buffer *buffer)
{
struct snd_efw *efw = entry->private_data;
struct snd_efw_phys_meters *meters;
unsigned int g, c, m, max, size;
const char *name;
u32 *linear;
int err;
size = sizeof(struct snd_efw_phys_meters) +
(efw->phys_in + efw->phys_out) * sizeof(u32);
meters = kzalloc(size, GFP_KERNEL);
if (meters == NULL)
return;
err = snd_efw_command_get_phys_meters(efw, meters, size);
if (err < 0)
goto end;
snd_iprintf(buffer, "Physical Meters:\n");
m = 0;
max = min(efw->phys_out, meters->out_meters);
linear = meters->values;
snd_iprintf(buffer, " %d Outputs:\n", max);
for (g = 0; g < efw->phys_out_grp_count; g++) {
name = get_phys_name(&efw->phys_out_grps[g], false);
for (c = 0; c < efw->phys_out_grps[g].count; c++) {
if (m < max)
snd_iprintf(buffer, "\t%s [%d]: %d\n",
name, c, linear[m++]);
}
}
m = 0;
max = min(efw->phys_in, meters->in_meters);
linear = meters->values + meters->out_meters;
snd_iprintf(buffer, " %d Inputs:\n", max);
for (g = 0; g < efw->phys_in_grp_count; g++) {
name = get_phys_name(&efw->phys_in_grps[g], true);
for (c = 0; c < efw->phys_in_grps[g].count; c++)
if (m < max)
snd_iprintf(buffer, "\t%s [%d]: %d\n",
name, c, linear[m++]);
}
end:
kfree(meters);
}
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
static void
proc_read_queues_state(struct snd_info_entry *entry,
struct snd_info_buffer *buffer)
{
struct snd_efw *efw = entry->private_data;
unsigned int consumed;
if (efw->pull_ptr > efw->push_ptr)
consumed = snd_efw_resp_buf_size -
(unsigned int)(efw->pull_ptr - efw->push_ptr);
else
consumed = (unsigned int)(efw->push_ptr - efw->pull_ptr);
snd_iprintf(buffer, "%d/%d\n",
consumed, snd_efw_resp_buf_size);
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
}
static void
add_node(struct snd_efw *efw, struct snd_info_entry *root, const char *name,
void (*op)(struct snd_info_entry *e, struct snd_info_buffer *b))
{
struct snd_info_entry *entry;
entry = snd_info_create_card_entry(efw->card, name, root);
if (entry == NULL)
return;
snd_info_set_text_ops(entry, efw, op);
if (snd_info_register(entry) < 0)
snd_info_free_entry(entry);
}
void snd_efw_proc_init(struct snd_efw *efw)
{
struct snd_info_entry *root;
/*
* All nodes are automatically removed at snd_card_disconnect(),
* by following to link list.
*/
root = snd_info_create_card_entry(efw->card, "firewire",
efw->card->proc_root);
if (root == NULL)
return;
root->mode = S_IFDIR | 0555;
if (snd_info_register(root) < 0) {
snd_info_free_entry(root);
return;
}
add_node(efw, root, "clock", proc_read_clock);
add_node(efw, root, "firmware", proc_read_hwinfo);
add_node(efw, root, "meters", proc_read_phys_meters);
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
add_node(efw, root, "queues", proc_read_queues_state);
}