linux/arch/s390/include/asm/pgtable.h

1426 lines
41 KiB
C
Raw Normal View History

/*
* S390 version
* Copyright IBM Corp. 1999, 2000
* Author(s): Hartmut Penner (hp@de.ibm.com)
* Ulrich Weigand (weigand@de.ibm.com)
* Martin Schwidefsky (schwidefsky@de.ibm.com)
*
* Derived from "include/asm-i386/pgtable.h"
*/
#ifndef _ASM_S390_PGTABLE_H
#define _ASM_S390_PGTABLE_H
/*
* The Linux memory management assumes a three-level page table setup.
* For s390 64 bit we use up to four of the five levels the hardware
* provides (region first tables are not used).
*
* The "pgd_xxx()" functions are trivial for a folded two-level
* setup: the pgd is never bad, and a pmd always exists (as it's folded
* into the pgd entry)
*
* This file contains the functions and defines necessary to modify and use
* the S390 page table tree.
*/
#ifndef __ASSEMBLY__
#include <linux/sched.h>
#include <linux/mm_types.h>
s390/mm: implement software dirty bits The s390 architecture is unique in respect to dirty page detection, it uses the change bit in the per-page storage key to track page modifications. All other architectures track dirty bits by means of page table entries. This property of s390 has caused numerous problems in the past, e.g. see git commit ef5d437f71afdf4a "mm: fix XFS oops due to dirty pages without buffers on s390". To avoid future issues in regard to per-page dirty bits convert s390 to a fault based software dirty bit detection mechanism. All user page table entries which are marked as clean will be hardware read-only, even if the pte is supposed to be writable. A write by the user process will trigger a protection fault which will cause the user pte to be marked as dirty and the hardware read-only bit is removed. With this change the dirty bit in the storage key is irrelevant for Linux as a host, but the storage key is still required for KVM guests. The effect is that page_test_and_clear_dirty and the related code can be removed. The referenced bit in the storage key is still used by the page_test_and_clear_young primitive to provide page age information. For page cache pages of mappings with mapping_cap_account_dirty there will not be any change in behavior as the dirty bit tracking already uses read-only ptes to control the amount of dirty pages. Only for swap cache pages and pages of mappings without mapping_cap_account_dirty there can be additional protection faults. To avoid an excessive number of additional faults the mk_pte primitive checks for PageDirty if the pgprot value allows for writes and pre-dirties the pte. That avoids all additional faults for tmpfs and shmem pages until these pages are added to the swap cache. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 20:17:37 +08:00
#include <linux/page-flags.h>
#include <linux/radix-tree.h>
#include <asm/bug.h>
#include <asm/page.h>
extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096)));
extern void paging_init(void);
extern void vmem_map_init(void);
/*
* The S390 doesn't have any external MMU info: the kernel page
* tables contain all the necessary information.
*/
#define update_mmu_cache(vma, address, ptep) do { } while (0)
#define update_mmu_cache_pmd(vma, address, ptep) do { } while (0)
/*
* ZERO_PAGE is a global shared page that is always zero; used
* for zero-mapped memory areas etc..
*/
extern unsigned long empty_zero_page;
extern unsigned long zero_page_mask;
#define ZERO_PAGE(vaddr) \
(virt_to_page((void *)(empty_zero_page + \
(((unsigned long)(vaddr)) &zero_page_mask))))
#define __HAVE_COLOR_ZERO_PAGE
/* TODO: s390 cannot support io_remap_pfn_range... */
#endif /* !__ASSEMBLY__ */
/*
* PMD_SHIFT determines the size of the area a second-level page
* table can map
* PGDIR_SHIFT determines what a third-level page table entry can map
*/
#define PMD_SHIFT 20
#define PUD_SHIFT 31
#define PGDIR_SHIFT 42
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
#define PUD_SIZE (1UL << PUD_SHIFT)
#define PUD_MASK (~(PUD_SIZE-1))
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/*
* entries per page directory level: the S390 is two-level, so
* we don't really have any PMD directory physically.
* for S390 segment-table entries are combined to one PGD
* that leads to 1024 pte per pgd
*/
#define PTRS_PER_PTE 256
#define PTRS_PER_PMD 2048
#define PTRS_PER_PUD 2048
#define PTRS_PER_PGD 2048
#define FIRST_USER_ADDRESS 0UL
#define pte_ERROR(e) \
printk("%s:%d: bad pte %p.\n", __FILE__, __LINE__, (void *) pte_val(e))
#define pmd_ERROR(e) \
printk("%s:%d: bad pmd %p.\n", __FILE__, __LINE__, (void *) pmd_val(e))
#define pud_ERROR(e) \
printk("%s:%d: bad pud %p.\n", __FILE__, __LINE__, (void *) pud_val(e))
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %p.\n", __FILE__, __LINE__, (void *) pgd_val(e))
#ifndef __ASSEMBLY__
/*
* The vmalloc and module area will always be on the topmost area of the
* kernel mapping. We reserve 128GB (64bit) for vmalloc and modules.
* On 64 bit kernels we have a 2GB area at the top of the vmalloc area where
* modules will reside. That makes sure that inter module branches always
* happen without trampolines and in addition the placement within a 2GB frame
* is branch prediction unit friendly.
*/
extern unsigned long VMALLOC_START;
extern unsigned long VMALLOC_END;
extern struct page *vmemmap;
#define VMEM_MAX_PHYS ((unsigned long) vmemmap)
extern unsigned long MODULES_VADDR;
extern unsigned long MODULES_END;
#define MODULES_VADDR MODULES_VADDR
#define MODULES_END MODULES_END
#define MODULES_LEN (1UL << 31)
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 18:17:38 +08:00
static inline int is_module_addr(void *addr)
{
BUILD_BUG_ON(MODULES_LEN > (1UL << 31));
if (addr < (void *)MODULES_VADDR)
return 0;
if (addr > (void *)MODULES_END)
return 0;
return 1;
}
/*
* A 64 bit pagetable entry of S390 has following format:
* | PFRA |0IPC| OS |
* 0000000000111111111122222222223333333333444444444455555555556666
* 0123456789012345678901234567890123456789012345678901234567890123
*
* I Page-Invalid Bit: Page is not available for address-translation
* P Page-Protection Bit: Store access not possible for page
* C Change-bit override: HW is not required to set change bit
*
* A 64 bit segmenttable entry of S390 has following format:
* | P-table origin | TT
* 0000000000111111111122222222223333333333444444444455555555556666
* 0123456789012345678901234567890123456789012345678901234567890123
*
* I Segment-Invalid Bit: Segment is not available for address-translation
* C Common-Segment Bit: Segment is not private (PoP 3-30)
* P Page-Protection Bit: Store access not possible for page
* TT Type 00
*
* A 64 bit region table entry of S390 has following format:
* | S-table origin | TF TTTL
* 0000000000111111111122222222223333333333444444444455555555556666
* 0123456789012345678901234567890123456789012345678901234567890123
*
* I Segment-Invalid Bit: Segment is not available for address-translation
* TT Type 01
* TF
* TL Table length
*
* The 64 bit regiontable origin of S390 has following format:
* | region table origon | DTTL
* 0000000000111111111122222222223333333333444444444455555555556666
* 0123456789012345678901234567890123456789012345678901234567890123
*
* X Space-Switch event:
* G Segment-Invalid Bit:
* P Private-Space Bit:
* S Storage-Alteration:
* R Real space
* TL Table-Length:
*
* A storage key has the following format:
* | ACC |F|R|C|0|
* 0 3 4 5 6 7
* ACC: access key
* F : fetch protection bit
* R : referenced bit
* C : changed bit
*/
/* Hardware bits in the page table entry */
#define _PAGE_PROTECT 0x200 /* HW read-only bit */
#define _PAGE_INVALID 0x400 /* HW invalid bit */
#define _PAGE_LARGE 0x800 /* Bit to mark a large pte */
/* Software bits in the page table entry */
#define _PAGE_PRESENT 0x001 /* SW pte present bit */
#define _PAGE_YOUNG 0x004 /* SW pte young bit */
#define _PAGE_DIRTY 0x008 /* SW pte dirty bit */
#define _PAGE_READ 0x010 /* SW pte read bit */
#define _PAGE_WRITE 0x020 /* SW pte write bit */
#define _PAGE_SPECIAL 0x040 /* SW associated with special page */
#define _PAGE_UNUSED 0x080 /* SW bit for pgste usage state */
#define __HAVE_ARCH_PTE_SPECIAL
#ifdef CONFIG_MEM_SOFT_DIRTY
#define _PAGE_SOFT_DIRTY 0x002 /* SW pte soft dirty bit */
#else
#define _PAGE_SOFT_DIRTY 0x000
#endif
/* Set of bits not changed in pte_modify */
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL | _PAGE_DIRTY | \
_PAGE_YOUNG | _PAGE_SOFT_DIRTY)
/*
* handle_pte_fault uses pte_present and pte_none to find out the pte type
* WITHOUT holding the page table lock. The _PAGE_PRESENT bit is used to
* distinguish present from not-present ptes. It is changed only with the page
* table lock held.
*
* The following table gives the different possible bit combinations for
* the pte hardware and software bits in the last 12 bits of a pte
* (. unassigned bit, x don't care, t swap type):
*
* 842100000000
* 000084210000
* 000000008421
* .IR.uswrdy.p
* empty .10.00000000
* swap .11..ttttt.0
* prot-none, clean, old .11.xx0000.1
* prot-none, clean, young .11.xx0001.1
* prot-none, dirty, old .10.xx0010.1
* prot-none, dirty, young .10.xx0011.1
* read-only, clean, old .11.xx0100.1
* read-only, clean, young .01.xx0101.1
* read-only, dirty, old .11.xx0110.1
* read-only, dirty, young .01.xx0111.1
* read-write, clean, old .11.xx1100.1
* read-write, clean, young .01.xx1101.1
* read-write, dirty, old .10.xx1110.1
* read-write, dirty, young .00.xx1111.1
* HW-bits: R read-only, I invalid
* SW-bits: p present, y young, d dirty, r read, w write, s special,
* u unused, l large
*
* pte_none is true for the bit pattern .10.00000000, pte == 0x400
* pte_swap is true for the bit pattern .11..ooooo.0, (pte & 0x201) == 0x200
* pte_present is true for the bit pattern .xx.xxxxxx.1, (pte & 0x001) == 0x001
*/
/* Bits in the segment/region table address-space-control-element */
#define _ASCE_ORIGIN ~0xfffUL/* segment table origin */
#define _ASCE_PRIVATE_SPACE 0x100 /* private space control */
#define _ASCE_ALT_EVENT 0x80 /* storage alteration event control */
#define _ASCE_SPACE_SWITCH 0x40 /* space switch event */
#define _ASCE_REAL_SPACE 0x20 /* real space control */
#define _ASCE_TYPE_MASK 0x0c /* asce table type mask */
#define _ASCE_TYPE_REGION1 0x0c /* region first table type */
#define _ASCE_TYPE_REGION2 0x08 /* region second table type */
#define _ASCE_TYPE_REGION3 0x04 /* region third table type */
#define _ASCE_TYPE_SEGMENT 0x00 /* segment table type */
#define _ASCE_TABLE_LENGTH 0x03 /* region table length */
/* Bits in the region table entry */
#define _REGION_ENTRY_ORIGIN ~0xfffUL/* region/segment table origin */
#define _REGION_ENTRY_PROTECT 0x200 /* region protection bit */
#define _REGION_ENTRY_INVALID 0x20 /* invalid region table entry */
#define _REGION_ENTRY_TYPE_MASK 0x0c /* region/segment table type mask */
#define _REGION_ENTRY_TYPE_R1 0x0c /* region first table type */
#define _REGION_ENTRY_TYPE_R2 0x08 /* region second table type */
#define _REGION_ENTRY_TYPE_R3 0x04 /* region third table type */
#define _REGION_ENTRY_LENGTH 0x03 /* region third length */
#define _REGION1_ENTRY (_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_LENGTH)
#define _REGION1_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_INVALID)
#define _REGION2_ENTRY (_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_LENGTH)
#define _REGION2_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_INVALID)
#define _REGION3_ENTRY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH)
#define _REGION3_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INVALID)
#define _REGION3_ENTRY_LARGE 0x400 /* RTTE-format control, large page */
#define _REGION3_ENTRY_RO 0x200 /* page protection bit */
/* Bits in the segment table entry */
#define _SEGMENT_ENTRY_BITS 0xfffffffffffffe33UL
#define _SEGMENT_ENTRY_BITS_LARGE 0xfffffffffff0ff33UL
#define _SEGMENT_ENTRY_ORIGIN_LARGE ~0xfffffUL /* large page address */
#define _SEGMENT_ENTRY_ORIGIN ~0x7ffUL/* segment table origin */
#define _SEGMENT_ENTRY_PROTECT 0x200 /* page protection bit */
#define _SEGMENT_ENTRY_INVALID 0x20 /* invalid segment table entry */
#define _SEGMENT_ENTRY (0)
#define _SEGMENT_ENTRY_EMPTY (_SEGMENT_ENTRY_INVALID)
#define _SEGMENT_ENTRY_DIRTY 0x2000 /* SW segment dirty bit */
#define _SEGMENT_ENTRY_YOUNG 0x1000 /* SW segment young bit */
#define _SEGMENT_ENTRY_LARGE 0x0400 /* STE-format control, large page */
#define _SEGMENT_ENTRY_READ 0x0002 /* SW segment read bit */
#define _SEGMENT_ENTRY_WRITE 0x0001 /* SW segment write bit */
#ifdef CONFIG_MEM_SOFT_DIRTY
#define _SEGMENT_ENTRY_SOFT_DIRTY 0x4000 /* SW segment soft dirty bit */
#else
#define _SEGMENT_ENTRY_SOFT_DIRTY 0x0000 /* SW segment soft dirty bit */
#endif
/*
* Segment table entry encoding (R = read-only, I = invalid, y = young bit):
* dy..R...I...rw
* prot-none, clean, old 00..1...1...00
* prot-none, clean, young 01..1...1...00
* prot-none, dirty, old 10..1...1...00
* prot-none, dirty, young 11..1...1...00
* read-only, clean, old 00..1...1...10
* read-only, clean, young 01..1...0...10
* read-only, dirty, old 10..1...1...10
* read-only, dirty, young 11..1...0...10
* read-write, clean, old 00..1...1...11
* read-write, clean, young 01..1...0...11
* read-write, dirty, old 10..0...1...11
* read-write, dirty, young 11..0...0...11
* The segment table origin is used to distinguish empty (origin==0) from
* read-write, old segment table entries (origin!=0)
* HW-bits: R read-only, I invalid
* SW-bits: y young, d dirty, r read, w write
*/
/* Page status table bits for virtualization */
#define PGSTE_ACC_BITS 0xf000000000000000UL
#define PGSTE_FP_BIT 0x0800000000000000UL
#define PGSTE_PCL_BIT 0x0080000000000000UL
#define PGSTE_HR_BIT 0x0040000000000000UL
#define PGSTE_HC_BIT 0x0020000000000000UL
#define PGSTE_GR_BIT 0x0004000000000000UL
#define PGSTE_GC_BIT 0x0002000000000000UL
#define PGSTE_UC_BIT 0x0000800000000000UL /* user dirty (migration) */
#define PGSTE_IN_BIT 0x0000400000000000UL /* IPTE notify bit */
/* Guest Page State used for virtualization */
#define _PGSTE_GPS_ZERO 0x0000000080000000UL
#define _PGSTE_GPS_USAGE_MASK 0x0000000003000000UL
#define _PGSTE_GPS_USAGE_STABLE 0x0000000000000000UL
#define _PGSTE_GPS_USAGE_UNUSED 0x0000000001000000UL
/*
* A user page table pointer has the space-switch-event bit, the
* private-space-control bit and the storage-alteration-event-control
* bit set. A kernel page table pointer doesn't need them.
*/
#define _ASCE_USER_BITS (_ASCE_SPACE_SWITCH | _ASCE_PRIVATE_SPACE | \
_ASCE_ALT_EVENT)
/*
* Page protection definitions.
*/
#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_INVALID)
#define PAGE_READ __pgprot(_PAGE_PRESENT | _PAGE_READ | \
_PAGE_INVALID | _PAGE_PROTECT)
#define PAGE_WRITE __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
_PAGE_INVALID | _PAGE_PROTECT)
#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
_PAGE_YOUNG | _PAGE_DIRTY)
#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
_PAGE_YOUNG | _PAGE_DIRTY)
#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_YOUNG | \
_PAGE_PROTECT)
/*
* On s390 the page table entry has an invalid bit and a read-only bit.
* Read permission implies execute permission and write permission
* implies read permission.
*/
/*xwr*/
#define __P000 PAGE_NONE
#define __P001 PAGE_READ
#define __P010 PAGE_READ
#define __P011 PAGE_READ
#define __P100 PAGE_READ
#define __P101 PAGE_READ
#define __P110 PAGE_READ
#define __P111 PAGE_READ
#define __S000 PAGE_NONE
#define __S001 PAGE_READ
#define __S010 PAGE_WRITE
#define __S011 PAGE_WRITE
#define __S100 PAGE_READ
#define __S101 PAGE_READ
#define __S110 PAGE_WRITE
#define __S111 PAGE_WRITE
mm/hugetlb: add more arch-defined huge_pte functions Commit abf09bed3cce ("s390/mm: implement software dirty bits") introduced another difference in the pte layout vs. the pmd layout on s390, thoroughly breaking the s390 support for hugetlbfs. This requires replacing some more pte_xxx functions in mm/hugetlbfs.c with a huge_pte_xxx version. This patch introduces those huge_pte_xxx functions and their generic implementation in asm-generic/hugetlb.h, which will now be included on all architectures supporting hugetlbfs apart from s390. This change will be a no-op for those architectures. [akpm@linux-foundation.org: fix warning] Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Michal Hocko <mhocko@suse.cz> [for !s390 parts] Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 06:07:23 +08:00
/*
* Segment entry (large page) protection definitions.
*/
#define SEGMENT_NONE __pgprot(_SEGMENT_ENTRY_INVALID | \
_SEGMENT_ENTRY_PROTECT)
#define SEGMENT_READ __pgprot(_SEGMENT_ENTRY_PROTECT | \
_SEGMENT_ENTRY_READ)
#define SEGMENT_WRITE __pgprot(_SEGMENT_ENTRY_READ | \
_SEGMENT_ENTRY_WRITE)
mm/hugetlb: add more arch-defined huge_pte functions Commit abf09bed3cce ("s390/mm: implement software dirty bits") introduced another difference in the pte layout vs. the pmd layout on s390, thoroughly breaking the s390 support for hugetlbfs. This requires replacing some more pte_xxx functions in mm/hugetlbfs.c with a huge_pte_xxx version. This patch introduces those huge_pte_xxx functions and their generic implementation in asm-generic/hugetlb.h, which will now be included on all architectures supporting hugetlbfs apart from s390. This change will be a no-op for those architectures. [akpm@linux-foundation.org: fix warning] Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Michal Hocko <mhocko@suse.cz> [for !s390 parts] Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 06:07:23 +08:00
static inline int mm_has_pgste(struct mm_struct *mm)
{
#ifdef CONFIG_PGSTE
if (unlikely(mm->context.has_pgste))
return 1;
#endif
return 0;
}
static inline int mm_alloc_pgste(struct mm_struct *mm)
{
#ifdef CONFIG_PGSTE
if (unlikely(mm->context.alloc_pgste))
return 1;
#endif
return 0;
}
/*
* In the case that a guest uses storage keys
* faults should no longer be backed by zero pages
*/
#define mm_forbids_zeropage mm_use_skey
static inline int mm_use_skey(struct mm_struct *mm)
{
#ifdef CONFIG_PGSTE
if (mm->context.use_skey)
return 1;
#endif
return 0;
}
/*
* pgd/pmd/pte query functions
*/
static inline int pgd_present(pgd_t pgd)
{
if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2)
return 1;
return (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) != 0UL;
}
static inline int pgd_none(pgd_t pgd)
{
if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2)
return 0;
return (pgd_val(pgd) & _REGION_ENTRY_INVALID) != 0UL;
}
static inline int pgd_bad(pgd_t pgd)
{
/*
* With dynamic page table levels the pgd can be a region table
* entry or a segment table entry. Check for the bit that are
* invalid for either table entry.
*/
unsigned long mask =
~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INVALID &
~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH;
return (pgd_val(pgd) & mask) != 0;
}
static inline int pud_present(pud_t pud)
{
if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3)
return 1;
return (pud_val(pud) & _REGION_ENTRY_ORIGIN) != 0UL;
}
static inline int pud_none(pud_t pud)
{
if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3)
return 0;
return (pud_val(pud) & _REGION_ENTRY_INVALID) != 0UL;
}
static inline int pud_large(pud_t pud)
{
if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) != _REGION_ENTRY_TYPE_R3)
return 0;
return !!(pud_val(pud) & _REGION3_ENTRY_LARGE);
}
static inline int pud_bad(pud_t pud)
{
/*
* With dynamic page table levels the pud can be a region table
* entry or a segment table entry. Check for the bit that are
* invalid for either table entry.
*/
unsigned long mask =
~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INVALID &
~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH;
return (pud_val(pud) & mask) != 0;
}
static inline int pmd_present(pmd_t pmd)
{
return pmd_val(pmd) != _SEGMENT_ENTRY_INVALID;
}
static inline int pmd_none(pmd_t pmd)
{
return pmd_val(pmd) == _SEGMENT_ENTRY_INVALID;
}
static inline int pmd_large(pmd_t pmd)
{
return (pmd_val(pmd) & _SEGMENT_ENTRY_LARGE) != 0;
}
static inline unsigned long pmd_pfn(pmd_t pmd)
{
unsigned long origin_mask;
origin_mask = _SEGMENT_ENTRY_ORIGIN;
if (pmd_large(pmd))
origin_mask = _SEGMENT_ENTRY_ORIGIN_LARGE;
return (pmd_val(pmd) & origin_mask) >> PAGE_SHIFT;
}
static inline int pmd_bad(pmd_t pmd)
{
if (pmd_large(pmd))
return (pmd_val(pmd) & ~_SEGMENT_ENTRY_BITS_LARGE) != 0;
return (pmd_val(pmd) & ~_SEGMENT_ENTRY_BITS) != 0;
}
#define __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
extern int pmdp_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp,
pmd_t entry, int dirty);
#define __HAVE_ARCH_PMDP_CLEAR_YOUNG_FLUSH
extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp);
#define __HAVE_ARCH_PMD_WRITE
static inline int pmd_write(pmd_t pmd)
{
return (pmd_val(pmd) & _SEGMENT_ENTRY_WRITE) != 0;
}
static inline int pmd_dirty(pmd_t pmd)
{
int dirty = 1;
if (pmd_large(pmd))
dirty = (pmd_val(pmd) & _SEGMENT_ENTRY_DIRTY) != 0;
return dirty;
}
static inline int pmd_young(pmd_t pmd)
{
int young = 1;
if (pmd_large(pmd))
young = (pmd_val(pmd) & _SEGMENT_ENTRY_YOUNG) != 0;
return young;
}
static inline int pte_present(pte_t pte)
{
/* Bit pattern: (pte & 0x001) == 0x001 */
return (pte_val(pte) & _PAGE_PRESENT) != 0;
}
static inline int pte_none(pte_t pte)
{
/* Bit pattern: pte == 0x400 */
return pte_val(pte) == _PAGE_INVALID;
}
static inline int pte_swap(pte_t pte)
{
/* Bit pattern: (pte & 0x201) == 0x200 */
return (pte_val(pte) & (_PAGE_PROTECT | _PAGE_PRESENT))
== _PAGE_PROTECT;
}
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:13:00 +08:00
static inline int pte_special(pte_t pte)
{
return (pte_val(pte) & _PAGE_SPECIAL);
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:13:00 +08:00
}
[S390] tlb flush fix. The current tlb flushing code for page table entries violates the s390 architecture in a small detail. The relevant section from the principles of operation (SA22-7832-02 page 3-47): "A valid table entry must not be changed while it is attached to any CPU and may be used for translation by that CPU except to (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page-table entry, or (3) make a change by means of a COMPARE AND SWAP AND PURGE instruction that purges the TLB." That means if one thread of a multithreaded applciation uses a vma while another thread does an unmap on it, the page table entries of that vma needs to get removed with IPTE, IDTE or CSP. In some strange and rare situations a cpu could check-stop (die) because a entry has been pushed out of the TLB that is still needed to complete a (milli-coded) instruction. I've never seen it happen with the current code on any of the supported machines, so right now this is a theoretical problem. But I want to fix it nevertheless, to avoid headaches in the futures. To get this implemented correctly without changing common code the primitives ptep_get_and_clear, ptep_get_and_clear_full and ptep_set_wrprotect need to use the IPTE instruction to invalidate the pte before the new pte value gets stored. If IPTE is always used for the three primitives three important operations will have a performace hit: fork, mprotect and exit_mmap. Time for some workarounds: * 1: ptep_get_and_clear_full is used in unmap_vmas to remove page tables entries in a batched tlb gather operation. If the mmu_gather context passed to unmap_vmas has been started with full_mm_flush==1 or if only one cpu is online or if the only user of a mm_struct is the current process then the fullmm indication in the mmu_gather context is set to one. All TLBs for mm_struct are flushed by the tlb_gather_mmu call. No new TLBs can be created while the unmap is in progress. In this case ptep_get_and_clear_full clears the ptes with a simple store. * 2: ptep_get_and_clear is used in change_protection to clear the ptes from the page tables before they are reentered with the new access flags. At the end of the update flush_tlb_range clears the remaining TLBs. In general the ptep_get_and_clear has to issue IPTE for each pte and flush_tlb_range is a nop. But if there is only one user of the mm_struct then ptep_get_and_clear uses simple stores to do the update and flush_tlb_range will flush the TLBs. * 3: Similar to 2, ptep_set_wrprotect is used in copy_page_range for a fork to make all ptes of a cow mapping read-only. At the end of of copy_page_range dup_mmap will flush the TLBs with a call to flush_tlb_mm. Check for mm->mm_users and if there is only one user avoid using IPTE in ptep_set_wrprotect and let flush_tlb_mm clear the TLBs. Overall for single threaded programs the tlb flush code now performs better, for multi threaded programs it is slightly worse. In particular exit_mmap() now does a single IDTE for the mm and then just frees every page cache reference and every page table page directly without a delay over the mmu_gather structure. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22 18:52:44 +08:00
#define __HAVE_ARCH_PTE_SAME
static inline int pte_same(pte_t a, pte_t b)
{
return pte_val(a) == pte_val(b);
}
#ifdef CONFIG_NUMA_BALANCING
static inline int pte_protnone(pte_t pte)
{
return pte_present(pte) && !(pte_val(pte) & _PAGE_READ);
}
static inline int pmd_protnone(pmd_t pmd)
{
/* pmd_large(pmd) implies pmd_present(pmd) */
return pmd_large(pmd) && !(pmd_val(pmd) & _SEGMENT_ENTRY_READ);
}
#endif
static inline int pte_soft_dirty(pte_t pte)
{
return pte_val(pte) & _PAGE_SOFT_DIRTY;
}
#define pte_swp_soft_dirty pte_soft_dirty
static inline pte_t pte_mksoft_dirty(pte_t pte)
{
pte_val(pte) |= _PAGE_SOFT_DIRTY;
return pte;
}
#define pte_swp_mksoft_dirty pte_mksoft_dirty
static inline pte_t pte_clear_soft_dirty(pte_t pte)
{
pte_val(pte) &= ~_PAGE_SOFT_DIRTY;
return pte;
}
#define pte_swp_clear_soft_dirty pte_clear_soft_dirty
static inline int pmd_soft_dirty(pmd_t pmd)
{
return pmd_val(pmd) & _SEGMENT_ENTRY_SOFT_DIRTY;
}
static inline pmd_t pmd_mksoft_dirty(pmd_t pmd)
{
pmd_val(pmd) |= _SEGMENT_ENTRY_SOFT_DIRTY;
return pmd;
}
static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd)
{
pmd_val(pmd) &= ~_SEGMENT_ENTRY_SOFT_DIRTY;
return pmd;
}
static inline pgste_t pgste_get_lock(pte_t *ptep)
s390: KVM preparation: host memory management changes for s390 kvm This patch changes the s390 memory management defintions to use the pgste field for dirty and reference bit tracking of host and guest code. Usually on s390, dirty and referenced are tracked in storage keys, which belong to the physical page. This changes with virtualization: The guest and host dirty/reference bits are defined to be the logical OR of the values for the mapping and the physical page. This patch implements the necessary changes in pgtable.h for s390. There is a common code change in mm/rmap.c, the call to page_test_and_clear_young must be moved. This is a no-op for all architecture but s390. page_referenced checks the referenced bits for the physiscal page and for all mappings: o The physical page is checked with page_test_and_clear_young. o The mappings are checked with ptep_test_and_clear_young and friends. Without pgstes (the current implementation on Linux s390) the physical page check is implemented but the mapping callbacks are no-ops because dirty and referenced are not tracked in the s390 page tables. The pgstes introduces guest and host dirty and reference bits for s390 in the host mapping. These mapping must be checked before page_test_and_clear_young resets the reference bit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:12 +08:00
{
unsigned long new = 0;
s390: KVM preparation: host memory management changes for s390 kvm This patch changes the s390 memory management defintions to use the pgste field for dirty and reference bit tracking of host and guest code. Usually on s390, dirty and referenced are tracked in storage keys, which belong to the physical page. This changes with virtualization: The guest and host dirty/reference bits are defined to be the logical OR of the values for the mapping and the physical page. This patch implements the necessary changes in pgtable.h for s390. There is a common code change in mm/rmap.c, the call to page_test_and_clear_young must be moved. This is a no-op for all architecture but s390. page_referenced checks the referenced bits for the physiscal page and for all mappings: o The physical page is checked with page_test_and_clear_young. o The mappings are checked with ptep_test_and_clear_young and friends. Without pgstes (the current implementation on Linux s390) the physical page check is implemented but the mapping callbacks are no-ops because dirty and referenced are not tracked in the s390 page tables. The pgstes introduces guest and host dirty and reference bits for s390 in the host mapping. These mapping must be checked before page_test_and_clear_young resets the reference bit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:12 +08:00
#ifdef CONFIG_PGSTE
unsigned long old;
s390: KVM preparation: host memory management changes for s390 kvm This patch changes the s390 memory management defintions to use the pgste field for dirty and reference bit tracking of host and guest code. Usually on s390, dirty and referenced are tracked in storage keys, which belong to the physical page. This changes with virtualization: The guest and host dirty/reference bits are defined to be the logical OR of the values for the mapping and the physical page. This patch implements the necessary changes in pgtable.h for s390. There is a common code change in mm/rmap.c, the call to page_test_and_clear_young must be moved. This is a no-op for all architecture but s390. page_referenced checks the referenced bits for the physiscal page and for all mappings: o The physical page is checked with page_test_and_clear_young. o The mappings are checked with ptep_test_and_clear_young and friends. Without pgstes (the current implementation on Linux s390) the physical page check is implemented but the mapping callbacks are no-ops because dirty and referenced are not tracked in the s390 page tables. The pgstes introduces guest and host dirty and reference bits for s390 in the host mapping. These mapping must be checked before page_test_and_clear_young resets the reference bit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:12 +08:00
preempt_disable();
asm(
" lg %0,%2\n"
"0: lgr %1,%0\n"
" nihh %0,0xff7f\n" /* clear PCL bit in old */
" oihh %1,0x0080\n" /* set PCL bit in new */
" csg %0,%1,%2\n"
" jl 0b\n"
: "=&d" (old), "=&d" (new), "=Q" (ptep[PTRS_PER_PTE])
: "Q" (ptep[PTRS_PER_PTE]) : "cc", "memory");
s390: KVM preparation: host memory management changes for s390 kvm This patch changes the s390 memory management defintions to use the pgste field for dirty and reference bit tracking of host and guest code. Usually on s390, dirty and referenced are tracked in storage keys, which belong to the physical page. This changes with virtualization: The guest and host dirty/reference bits are defined to be the logical OR of the values for the mapping and the physical page. This patch implements the necessary changes in pgtable.h for s390. There is a common code change in mm/rmap.c, the call to page_test_and_clear_young must be moved. This is a no-op for all architecture but s390. page_referenced checks the referenced bits for the physiscal page and for all mappings: o The physical page is checked with page_test_and_clear_young. o The mappings are checked with ptep_test_and_clear_young and friends. Without pgstes (the current implementation on Linux s390) the physical page check is implemented but the mapping callbacks are no-ops because dirty and referenced are not tracked in the s390 page tables. The pgstes introduces guest and host dirty and reference bits for s390 in the host mapping. These mapping must be checked before page_test_and_clear_young resets the reference bit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:12 +08:00
#endif
return __pgste(new);
s390: KVM preparation: host memory management changes for s390 kvm This patch changes the s390 memory management defintions to use the pgste field for dirty and reference bit tracking of host and guest code. Usually on s390, dirty and referenced are tracked in storage keys, which belong to the physical page. This changes with virtualization: The guest and host dirty/reference bits are defined to be the logical OR of the values for the mapping and the physical page. This patch implements the necessary changes in pgtable.h for s390. There is a common code change in mm/rmap.c, the call to page_test_and_clear_young must be moved. This is a no-op for all architecture but s390. page_referenced checks the referenced bits for the physiscal page and for all mappings: o The physical page is checked with page_test_and_clear_young. o The mappings are checked with ptep_test_and_clear_young and friends. Without pgstes (the current implementation on Linux s390) the physical page check is implemented but the mapping callbacks are no-ops because dirty and referenced are not tracked in the s390 page tables. The pgstes introduces guest and host dirty and reference bits for s390 in the host mapping. These mapping must be checked before page_test_and_clear_young resets the reference bit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:12 +08:00
}
static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste)
s390: KVM preparation: host memory management changes for s390 kvm This patch changes the s390 memory management defintions to use the pgste field for dirty and reference bit tracking of host and guest code. Usually on s390, dirty and referenced are tracked in storage keys, which belong to the physical page. This changes with virtualization: The guest and host dirty/reference bits are defined to be the logical OR of the values for the mapping and the physical page. This patch implements the necessary changes in pgtable.h for s390. There is a common code change in mm/rmap.c, the call to page_test_and_clear_young must be moved. This is a no-op for all architecture but s390. page_referenced checks the referenced bits for the physiscal page and for all mappings: o The physical page is checked with page_test_and_clear_young. o The mappings are checked with ptep_test_and_clear_young and friends. Without pgstes (the current implementation on Linux s390) the physical page check is implemented but the mapping callbacks are no-ops because dirty and referenced are not tracked in the s390 page tables. The pgstes introduces guest and host dirty and reference bits for s390 in the host mapping. These mapping must be checked before page_test_and_clear_young resets the reference bit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:12 +08:00
{
#ifdef CONFIG_PGSTE
asm(
" nihh %1,0xff7f\n" /* clear PCL bit */
" stg %1,%0\n"
: "=Q" (ptep[PTRS_PER_PTE])
: "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE])
: "cc", "memory");
s390: KVM preparation: host memory management changes for s390 kvm This patch changes the s390 memory management defintions to use the pgste field for dirty and reference bit tracking of host and guest code. Usually on s390, dirty and referenced are tracked in storage keys, which belong to the physical page. This changes with virtualization: The guest and host dirty/reference bits are defined to be the logical OR of the values for the mapping and the physical page. This patch implements the necessary changes in pgtable.h for s390. There is a common code change in mm/rmap.c, the call to page_test_and_clear_young must be moved. This is a no-op for all architecture but s390. page_referenced checks the referenced bits for the physiscal page and for all mappings: o The physical page is checked with page_test_and_clear_young. o The mappings are checked with ptep_test_and_clear_young and friends. Without pgstes (the current implementation on Linux s390) the physical page check is implemented but the mapping callbacks are no-ops because dirty and referenced are not tracked in the s390 page tables. The pgstes introduces guest and host dirty and reference bits for s390 in the host mapping. These mapping must be checked before page_test_and_clear_young resets the reference bit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-26 01:47:12 +08:00
preempt_enable();
#endif
}
static inline pgste_t pgste_get(pte_t *ptep)
{
unsigned long pgste = 0;
#ifdef CONFIG_PGSTE
pgste = *(unsigned long *)(ptep + PTRS_PER_PTE);
#endif
return __pgste(pgste);
}
static inline void pgste_set(pte_t *ptep, pgste_t pgste)
{
#ifdef CONFIG_PGSTE
*(pgste_t *)(ptep + PTRS_PER_PTE) = pgste;
#endif
}
bool pgste_test_and_clear_dirty(struct mm_struct *, unsigned long address);
void ptep_ipte_notify(struct mm_struct *, unsigned long addr, pte_t *);
s390/mm: implement software dirty bits The s390 architecture is unique in respect to dirty page detection, it uses the change bit in the per-page storage key to track page modifications. All other architectures track dirty bits by means of page table entries. This property of s390 has caused numerous problems in the past, e.g. see git commit ef5d437f71afdf4a "mm: fix XFS oops due to dirty pages without buffers on s390". To avoid future issues in regard to per-page dirty bits convert s390 to a fault based software dirty bit detection mechanism. All user page table entries which are marked as clean will be hardware read-only, even if the pte is supposed to be writable. A write by the user process will trigger a protection fault which will cause the user pte to be marked as dirty and the hardware read-only bit is removed. With this change the dirty bit in the storage key is irrelevant for Linux as a host, but the storage key is still required for KVM guests. The effect is that page_test_and_clear_dirty and the related code can be removed. The referenced bit in the storage key is still used by the page_test_and_clear_young primitive to provide page age information. For page cache pages of mappings with mapping_cap_account_dirty there will not be any change in behavior as the dirty bit tracking already uses read-only ptes to control the amount of dirty pages. Only for swap cache pages and pages of mappings without mapping_cap_account_dirty there can be additional protection faults. To avoid an excessive number of additional faults the mk_pte primitive checks for PageDirty if the pgprot value allows for writes and pre-dirties the pte. That avoids all additional faults for tmpfs and shmem pages until these pages are added to the swap cache. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 20:17:37 +08:00
/**
* struct gmap_struct - guest address space
* @crst_list: list of all crst tables used in the guest address space
* @mm: pointer to the parent mm_struct
* @guest_to_host: radix tree with guest to host address translation
* @host_to_guest: radix tree with pointer to segment table entries
* @guest_table_lock: spinlock to protect all entries in the guest page table
* @table: pointer to the page directory
* @asce: address space control element for gmap page table
* @pfault_enabled: defines if pfaults are applicable for the guest
*/
struct gmap {
struct list_head list;
struct list_head crst_list;
struct mm_struct *mm;
struct radix_tree_root guest_to_host;
struct radix_tree_root host_to_guest;
spinlock_t guest_table_lock;
unsigned long *table;
unsigned long asce;
unsigned long asce_end;
void *private;
bool pfault_enabled;
};
/**
* struct gmap_notifier - notify function block for page invalidation
* @notifier_call: address of callback function
*/
struct gmap_notifier {
struct list_head list;
void (*notifier_call)(struct gmap *gmap, unsigned long gaddr);
};
struct gmap *gmap_alloc(struct mm_struct *mm, unsigned long limit);
void gmap_free(struct gmap *gmap);
void gmap_enable(struct gmap *gmap);
void gmap_disable(struct gmap *gmap);
int gmap_map_segment(struct gmap *gmap, unsigned long from,
unsigned long to, unsigned long len);
int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len);
unsigned long __gmap_translate(struct gmap *, unsigned long gaddr);
unsigned long gmap_translate(struct gmap *, unsigned long gaddr);
int __gmap_link(struct gmap *gmap, unsigned long gaddr, unsigned long vmaddr);
int gmap_fault(struct gmap *, unsigned long gaddr, unsigned int fault_flags);
void gmap_discard(struct gmap *, unsigned long from, unsigned long to);
void __gmap_zap(struct gmap *, unsigned long gaddr);
void gmap_register_ipte_notifier(struct gmap_notifier *);
void gmap_unregister_ipte_notifier(struct gmap_notifier *);
int gmap_ipte_notify(struct gmap *, unsigned long start, unsigned long len);
/*
* query functions pte_write/pte_dirty/pte_young only work if
* pte_present() is true. Undefined behaviour if not..
*/
static inline int pte_write(pte_t pte)
{
return (pte_val(pte) & _PAGE_WRITE) != 0;
}
static inline int pte_dirty(pte_t pte)
{
return (pte_val(pte) & _PAGE_DIRTY) != 0;
}
static inline int pte_young(pte_t pte)
{
return (pte_val(pte) & _PAGE_YOUNG) != 0;
}
#define __HAVE_ARCH_PTE_UNUSED
static inline int pte_unused(pte_t pte)
{
return pte_val(pte) & _PAGE_UNUSED;
}
/*
* pgd/pmd/pte modification functions
*/
static inline void pgd_clear(pgd_t *pgd)
{
if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2)
pgd_val(*pgd) = _REGION2_ENTRY_EMPTY;
}
static inline void pud_clear(pud_t *pud)
{
if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3)
pud_val(*pud) = _REGION3_ENTRY_EMPTY;
}
static inline void pmd_clear(pmd_t *pmdp)
{
pmd_val(*pmdp) = _SEGMENT_ENTRY_INVALID;
}
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
pte_val(*ptep) = _PAGE_INVALID;
}
/*
* The following pte modification functions only work if
* pte_present() is true. Undefined behaviour if not..
*/
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
pte_val(pte) &= _PAGE_CHG_MASK;
pte_val(pte) |= pgprot_val(newprot);
/*
* newprot for PAGE_NONE, PAGE_READ and PAGE_WRITE has the
* invalid bit set, clear it again for readable, young pages
*/
if ((pte_val(pte) & _PAGE_YOUNG) && (pte_val(pte) & _PAGE_READ))
pte_val(pte) &= ~_PAGE_INVALID;
/*
* newprot for PAGE_READ and PAGE_WRITE has the page protection
* bit set, clear it again for writable, dirty pages
*/
if ((pte_val(pte) & _PAGE_DIRTY) && (pte_val(pte) & _PAGE_WRITE))
pte_val(pte) &= ~_PAGE_PROTECT;
return pte;
}
static inline pte_t pte_wrprotect(pte_t pte)
{
pte_val(pte) &= ~_PAGE_WRITE;
pte_val(pte) |= _PAGE_PROTECT;
return pte;
}
static inline pte_t pte_mkwrite(pte_t pte)
{
pte_val(pte) |= _PAGE_WRITE;
if (pte_val(pte) & _PAGE_DIRTY)
pte_val(pte) &= ~_PAGE_PROTECT;
return pte;
}
static inline pte_t pte_mkclean(pte_t pte)
{
pte_val(pte) &= ~_PAGE_DIRTY;
pte_val(pte) |= _PAGE_PROTECT;
return pte;
}
static inline pte_t pte_mkdirty(pte_t pte)
{
pte_val(pte) |= _PAGE_DIRTY | _PAGE_SOFT_DIRTY;
if (pte_val(pte) & _PAGE_WRITE)
pte_val(pte) &= ~_PAGE_PROTECT;
return pte;
}
static inline pte_t pte_mkold(pte_t pte)
{
pte_val(pte) &= ~_PAGE_YOUNG;
pte_val(pte) |= _PAGE_INVALID;
return pte;
}
static inline pte_t pte_mkyoung(pte_t pte)
{
pte_val(pte) |= _PAGE_YOUNG;
if (pte_val(pte) & _PAGE_READ)
pte_val(pte) &= ~_PAGE_INVALID;
return pte;
}
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:13:00 +08:00
static inline pte_t pte_mkspecial(pte_t pte)
{
pte_val(pte) |= _PAGE_SPECIAL;
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:13:00 +08:00
return pte;
}
#ifdef CONFIG_HUGETLB_PAGE
static inline pte_t pte_mkhuge(pte_t pte)
{
pte_val(pte) |= _PAGE_LARGE;
return pte;
}
#endif
static inline void __ptep_ipte(unsigned long address, pte_t *ptep)
{
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 19:00:09 +08:00
unsigned long pto = (unsigned long) ptep;
/* Invalidation + global TLB flush for the pte */
asm volatile(
" ipte %2,%3"
: "=m" (*ptep) : "m" (*ptep), "a" (pto), "a" (address));
}
static inline void __ptep_ipte_local(unsigned long address, pte_t *ptep)
{
unsigned long pto = (unsigned long) ptep;
/* Invalidation + local TLB flush for the pte */
asm volatile(
" .insn rrf,0xb2210000,%2,%3,0,1"
: "=m" (*ptep) : "m" (*ptep), "a" (pto), "a" (address));
}
static inline void __ptep_ipte_range(unsigned long address, int nr, pte_t *ptep)
{
unsigned long pto = (unsigned long) ptep;
/* Invalidate a range of ptes + global TLB flush of the ptes */
do {
asm volatile(
" .insn rrf,0xb2210000,%2,%0,%1,0"
: "+a" (address), "+a" (nr) : "a" (pto) : "memory");
} while (nr != 255);
}
/*
* This is hard to understand. ptep_get_and_clear and ptep_clear_flush
* both clear the TLB for the unmapped pte. The reason is that
* ptep_get_and_clear is used in common code (e.g. change_pte_range)
* to modify an active pte. The sequence is
* 1) ptep_get_and_clear
* 2) set_pte_at
* 3) flush_tlb_range
* On s390 the tlb needs to get flushed with the modification of the pte
* if the pte is active. The only way how this can be implemented is to
* have ptep_get_and_clear do the tlb flush. In exchange flush_tlb_range
* is a nop.
*/
pte_t ptep_xchg_direct(struct mm_struct *, unsigned long, pte_t *, pte_t);
pte_t ptep_xchg_lazy(struct mm_struct *, unsigned long, pte_t *, pte_t);
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
pte_t pte = *ptep;
pte = ptep_xchg_direct(vma->vm_mm, addr, ptep, pte_mkold(pte));
return pte_young(pte);
}
#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep)
{
return ptep_test_and_clear_young(vma, address, ptep);
}
[S390] tlb flush fix. The current tlb flushing code for page table entries violates the s390 architecture in a small detail. The relevant section from the principles of operation (SA22-7832-02 page 3-47): "A valid table entry must not be changed while it is attached to any CPU and may be used for translation by that CPU except to (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page-table entry, or (3) make a change by means of a COMPARE AND SWAP AND PURGE instruction that purges the TLB." That means if one thread of a multithreaded applciation uses a vma while another thread does an unmap on it, the page table entries of that vma needs to get removed with IPTE, IDTE or CSP. In some strange and rare situations a cpu could check-stop (die) because a entry has been pushed out of the TLB that is still needed to complete a (milli-coded) instruction. I've never seen it happen with the current code on any of the supported machines, so right now this is a theoretical problem. But I want to fix it nevertheless, to avoid headaches in the futures. To get this implemented correctly without changing common code the primitives ptep_get_and_clear, ptep_get_and_clear_full and ptep_set_wrprotect need to use the IPTE instruction to invalidate the pte before the new pte value gets stored. If IPTE is always used for the three primitives three important operations will have a performace hit: fork, mprotect and exit_mmap. Time for some workarounds: * 1: ptep_get_and_clear_full is used in unmap_vmas to remove page tables entries in a batched tlb gather operation. If the mmu_gather context passed to unmap_vmas has been started with full_mm_flush==1 or if only one cpu is online or if the only user of a mm_struct is the current process then the fullmm indication in the mmu_gather context is set to one. All TLBs for mm_struct are flushed by the tlb_gather_mmu call. No new TLBs can be created while the unmap is in progress. In this case ptep_get_and_clear_full clears the ptes with a simple store. * 2: ptep_get_and_clear is used in change_protection to clear the ptes from the page tables before they are reentered with the new access flags. At the end of the update flush_tlb_range clears the remaining TLBs. In general the ptep_get_and_clear has to issue IPTE for each pte and flush_tlb_range is a nop. But if there is only one user of the mm_struct then ptep_get_and_clear uses simple stores to do the update and flush_tlb_range will flush the TLBs. * 3: Similar to 2, ptep_set_wrprotect is used in copy_page_range for a fork to make all ptes of a cow mapping read-only. At the end of of copy_page_range dup_mmap will flush the TLBs with a call to flush_tlb_mm. Check for mm->mm_users and if there is only one user avoid using IPTE in ptep_set_wrprotect and let flush_tlb_mm clear the TLBs. Overall for single threaded programs the tlb flush code now performs better, for multi threaded programs it is slightly worse. In particular exit_mmap() now does a single IDTE for the mm and then just frees every page cache reference and every page table page directly without a delay over the mmu_gather structure. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22 18:52:44 +08:00
#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
return ptep_xchg_lazy(mm, addr, ptep, __pte(_PAGE_INVALID));
}
#define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
pte_t ptep_modify_prot_start(struct mm_struct *, unsigned long, pte_t *);
void ptep_modify_prot_commit(struct mm_struct *, unsigned long, pte_t *, pte_t);
[S390] tlb flush fix. The current tlb flushing code for page table entries violates the s390 architecture in a small detail. The relevant section from the principles of operation (SA22-7832-02 page 3-47): "A valid table entry must not be changed while it is attached to any CPU and may be used for translation by that CPU except to (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page-table entry, or (3) make a change by means of a COMPARE AND SWAP AND PURGE instruction that purges the TLB." That means if one thread of a multithreaded applciation uses a vma while another thread does an unmap on it, the page table entries of that vma needs to get removed with IPTE, IDTE or CSP. In some strange and rare situations a cpu could check-stop (die) because a entry has been pushed out of the TLB that is still needed to complete a (milli-coded) instruction. I've never seen it happen with the current code on any of the supported machines, so right now this is a theoretical problem. But I want to fix it nevertheless, to avoid headaches in the futures. To get this implemented correctly without changing common code the primitives ptep_get_and_clear, ptep_get_and_clear_full and ptep_set_wrprotect need to use the IPTE instruction to invalidate the pte before the new pte value gets stored. If IPTE is always used for the three primitives three important operations will have a performace hit: fork, mprotect and exit_mmap. Time for some workarounds: * 1: ptep_get_and_clear_full is used in unmap_vmas to remove page tables entries in a batched tlb gather operation. If the mmu_gather context passed to unmap_vmas has been started with full_mm_flush==1 or if only one cpu is online or if the only user of a mm_struct is the current process then the fullmm indication in the mmu_gather context is set to one. All TLBs for mm_struct are flushed by the tlb_gather_mmu call. No new TLBs can be created while the unmap is in progress. In this case ptep_get_and_clear_full clears the ptes with a simple store. * 2: ptep_get_and_clear is used in change_protection to clear the ptes from the page tables before they are reentered with the new access flags. At the end of the update flush_tlb_range clears the remaining TLBs. In general the ptep_get_and_clear has to issue IPTE for each pte and flush_tlb_range is a nop. But if there is only one user of the mm_struct then ptep_get_and_clear uses simple stores to do the update and flush_tlb_range will flush the TLBs. * 3: Similar to 2, ptep_set_wrprotect is used in copy_page_range for a fork to make all ptes of a cow mapping read-only. At the end of of copy_page_range dup_mmap will flush the TLBs with a call to flush_tlb_mm. Check for mm->mm_users and if there is only one user avoid using IPTE in ptep_set_wrprotect and let flush_tlb_mm clear the TLBs. Overall for single threaded programs the tlb flush code now performs better, for multi threaded programs it is slightly worse. In particular exit_mmap() now does a single IDTE for the mm and then just frees every page cache reference and every page table page directly without a delay over the mmu_gather structure. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22 18:52:44 +08:00
#define __HAVE_ARCH_PTEP_CLEAR_FLUSH
static inline pte_t ptep_clear_flush(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
return ptep_xchg_direct(vma->vm_mm, addr, ptep, __pte(_PAGE_INVALID));
}
[S390] tlb flush fix. The current tlb flushing code for page table entries violates the s390 architecture in a small detail. The relevant section from the principles of operation (SA22-7832-02 page 3-47): "A valid table entry must not be changed while it is attached to any CPU and may be used for translation by that CPU except to (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page-table entry, or (3) make a change by means of a COMPARE AND SWAP AND PURGE instruction that purges the TLB." That means if one thread of a multithreaded applciation uses a vma while another thread does an unmap on it, the page table entries of that vma needs to get removed with IPTE, IDTE or CSP. In some strange and rare situations a cpu could check-stop (die) because a entry has been pushed out of the TLB that is still needed to complete a (milli-coded) instruction. I've never seen it happen with the current code on any of the supported machines, so right now this is a theoretical problem. But I want to fix it nevertheless, to avoid headaches in the futures. To get this implemented correctly without changing common code the primitives ptep_get_and_clear, ptep_get_and_clear_full and ptep_set_wrprotect need to use the IPTE instruction to invalidate the pte before the new pte value gets stored. If IPTE is always used for the three primitives three important operations will have a performace hit: fork, mprotect and exit_mmap. Time for some workarounds: * 1: ptep_get_and_clear_full is used in unmap_vmas to remove page tables entries in a batched tlb gather operation. If the mmu_gather context passed to unmap_vmas has been started with full_mm_flush==1 or if only one cpu is online or if the only user of a mm_struct is the current process then the fullmm indication in the mmu_gather context is set to one. All TLBs for mm_struct are flushed by the tlb_gather_mmu call. No new TLBs can be created while the unmap is in progress. In this case ptep_get_and_clear_full clears the ptes with a simple store. * 2: ptep_get_and_clear is used in change_protection to clear the ptes from the page tables before they are reentered with the new access flags. At the end of the update flush_tlb_range clears the remaining TLBs. In general the ptep_get_and_clear has to issue IPTE for each pte and flush_tlb_range is a nop. But if there is only one user of the mm_struct then ptep_get_and_clear uses simple stores to do the update and flush_tlb_range will flush the TLBs. * 3: Similar to 2, ptep_set_wrprotect is used in copy_page_range for a fork to make all ptes of a cow mapping read-only. At the end of of copy_page_range dup_mmap will flush the TLBs with a call to flush_tlb_mm. Check for mm->mm_users and if there is only one user avoid using IPTE in ptep_set_wrprotect and let flush_tlb_mm clear the TLBs. Overall for single threaded programs the tlb flush code now performs better, for multi threaded programs it is slightly worse. In particular exit_mmap() now does a single IDTE for the mm and then just frees every page cache reference and every page table page directly without a delay over the mmu_gather structure. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22 18:52:44 +08:00
/*
* The batched pte unmap code uses ptep_get_and_clear_full to clear the
* ptes. Here an optimization is possible. tlb_gather_mmu flushes all
* tlbs of an mm if it can guarantee that the ptes of the mm_struct
* cannot be accessed while the batched unmap is running. In this case
* full==1 and a simple pte_clear is enough. See tlb.h.
*/
#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
unsigned long addr,
[S390] tlb flush fix. The current tlb flushing code for page table entries violates the s390 architecture in a small detail. The relevant section from the principles of operation (SA22-7832-02 page 3-47): "A valid table entry must not be changed while it is attached to any CPU and may be used for translation by that CPU except to (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page-table entry, or (3) make a change by means of a COMPARE AND SWAP AND PURGE instruction that purges the TLB." That means if one thread of a multithreaded applciation uses a vma while another thread does an unmap on it, the page table entries of that vma needs to get removed with IPTE, IDTE or CSP. In some strange and rare situations a cpu could check-stop (die) because a entry has been pushed out of the TLB that is still needed to complete a (milli-coded) instruction. I've never seen it happen with the current code on any of the supported machines, so right now this is a theoretical problem. But I want to fix it nevertheless, to avoid headaches in the futures. To get this implemented correctly without changing common code the primitives ptep_get_and_clear, ptep_get_and_clear_full and ptep_set_wrprotect need to use the IPTE instruction to invalidate the pte before the new pte value gets stored. If IPTE is always used for the three primitives three important operations will have a performace hit: fork, mprotect and exit_mmap. Time for some workarounds: * 1: ptep_get_and_clear_full is used in unmap_vmas to remove page tables entries in a batched tlb gather operation. If the mmu_gather context passed to unmap_vmas has been started with full_mm_flush==1 or if only one cpu is online or if the only user of a mm_struct is the current process then the fullmm indication in the mmu_gather context is set to one. All TLBs for mm_struct are flushed by the tlb_gather_mmu call. No new TLBs can be created while the unmap is in progress. In this case ptep_get_and_clear_full clears the ptes with a simple store. * 2: ptep_get_and_clear is used in change_protection to clear the ptes from the page tables before they are reentered with the new access flags. At the end of the update flush_tlb_range clears the remaining TLBs. In general the ptep_get_and_clear has to issue IPTE for each pte and flush_tlb_range is a nop. But if there is only one user of the mm_struct then ptep_get_and_clear uses simple stores to do the update and flush_tlb_range will flush the TLBs. * 3: Similar to 2, ptep_set_wrprotect is used in copy_page_range for a fork to make all ptes of a cow mapping read-only. At the end of of copy_page_range dup_mmap will flush the TLBs with a call to flush_tlb_mm. Check for mm->mm_users and if there is only one user avoid using IPTE in ptep_set_wrprotect and let flush_tlb_mm clear the TLBs. Overall for single threaded programs the tlb flush code now performs better, for multi threaded programs it is slightly worse. In particular exit_mmap() now does a single IDTE for the mm and then just frees every page cache reference and every page table page directly without a delay over the mmu_gather structure. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22 18:52:44 +08:00
pte_t *ptep, int full)
{
if (full) {
pte_t pte = *ptep;
*ptep = __pte(_PAGE_INVALID);
return pte;
}
return ptep_xchg_lazy(mm, addr, ptep, __pte(_PAGE_INVALID));
}
[S390] tlb flush fix. The current tlb flushing code for page table entries violates the s390 architecture in a small detail. The relevant section from the principles of operation (SA22-7832-02 page 3-47): "A valid table entry must not be changed while it is attached to any CPU and may be used for translation by that CPU except to (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page-table entry, or (3) make a change by means of a COMPARE AND SWAP AND PURGE instruction that purges the TLB." That means if one thread of a multithreaded applciation uses a vma while another thread does an unmap on it, the page table entries of that vma needs to get removed with IPTE, IDTE or CSP. In some strange and rare situations a cpu could check-stop (die) because a entry has been pushed out of the TLB that is still needed to complete a (milli-coded) instruction. I've never seen it happen with the current code on any of the supported machines, so right now this is a theoretical problem. But I want to fix it nevertheless, to avoid headaches in the futures. To get this implemented correctly without changing common code the primitives ptep_get_and_clear, ptep_get_and_clear_full and ptep_set_wrprotect need to use the IPTE instruction to invalidate the pte before the new pte value gets stored. If IPTE is always used for the three primitives three important operations will have a performace hit: fork, mprotect and exit_mmap. Time for some workarounds: * 1: ptep_get_and_clear_full is used in unmap_vmas to remove page tables entries in a batched tlb gather operation. If the mmu_gather context passed to unmap_vmas has been started with full_mm_flush==1 or if only one cpu is online or if the only user of a mm_struct is the current process then the fullmm indication in the mmu_gather context is set to one. All TLBs for mm_struct are flushed by the tlb_gather_mmu call. No new TLBs can be created while the unmap is in progress. In this case ptep_get_and_clear_full clears the ptes with a simple store. * 2: ptep_get_and_clear is used in change_protection to clear the ptes from the page tables before they are reentered with the new access flags. At the end of the update flush_tlb_range clears the remaining TLBs. In general the ptep_get_and_clear has to issue IPTE for each pte and flush_tlb_range is a nop. But if there is only one user of the mm_struct then ptep_get_and_clear uses simple stores to do the update and flush_tlb_range will flush the TLBs. * 3: Similar to 2, ptep_set_wrprotect is used in copy_page_range for a fork to make all ptes of a cow mapping read-only. At the end of of copy_page_range dup_mmap will flush the TLBs with a call to flush_tlb_mm. Check for mm->mm_users and if there is only one user avoid using IPTE in ptep_set_wrprotect and let flush_tlb_mm clear the TLBs. Overall for single threaded programs the tlb flush code now performs better, for multi threaded programs it is slightly worse. In particular exit_mmap() now does a single IDTE for the mm and then just frees every page cache reference and every page table page directly without a delay over the mmu_gather structure. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22 18:52:44 +08:00
#define __HAVE_ARCH_PTEP_SET_WRPROTECT
static inline void ptep_set_wrprotect(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
pte_t pte = *ptep;
if (pte_write(pte))
ptep_xchg_lazy(mm, addr, ptep, pte_wrprotect(pte));
}
[S390] tlb flush fix. The current tlb flushing code for page table entries violates the s390 architecture in a small detail. The relevant section from the principles of operation (SA22-7832-02 page 3-47): "A valid table entry must not be changed while it is attached to any CPU and may be used for translation by that CPU except to (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page-table entry, or (3) make a change by means of a COMPARE AND SWAP AND PURGE instruction that purges the TLB." That means if one thread of a multithreaded applciation uses a vma while another thread does an unmap on it, the page table entries of that vma needs to get removed with IPTE, IDTE or CSP. In some strange and rare situations a cpu could check-stop (die) because a entry has been pushed out of the TLB that is still needed to complete a (milli-coded) instruction. I've never seen it happen with the current code on any of the supported machines, so right now this is a theoretical problem. But I want to fix it nevertheless, to avoid headaches in the futures. To get this implemented correctly without changing common code the primitives ptep_get_and_clear, ptep_get_and_clear_full and ptep_set_wrprotect need to use the IPTE instruction to invalidate the pte before the new pte value gets stored. If IPTE is always used for the three primitives three important operations will have a performace hit: fork, mprotect and exit_mmap. Time for some workarounds: * 1: ptep_get_and_clear_full is used in unmap_vmas to remove page tables entries in a batched tlb gather operation. If the mmu_gather context passed to unmap_vmas has been started with full_mm_flush==1 or if only one cpu is online or if the only user of a mm_struct is the current process then the fullmm indication in the mmu_gather context is set to one. All TLBs for mm_struct are flushed by the tlb_gather_mmu call. No new TLBs can be created while the unmap is in progress. In this case ptep_get_and_clear_full clears the ptes with a simple store. * 2: ptep_get_and_clear is used in change_protection to clear the ptes from the page tables before they are reentered with the new access flags. At the end of the update flush_tlb_range clears the remaining TLBs. In general the ptep_get_and_clear has to issue IPTE for each pte and flush_tlb_range is a nop. But if there is only one user of the mm_struct then ptep_get_and_clear uses simple stores to do the update and flush_tlb_range will flush the TLBs. * 3: Similar to 2, ptep_set_wrprotect is used in copy_page_range for a fork to make all ptes of a cow mapping read-only. At the end of of copy_page_range dup_mmap will flush the TLBs with a call to flush_tlb_mm. Check for mm->mm_users and if there is only one user avoid using IPTE in ptep_set_wrprotect and let flush_tlb_mm clear the TLBs. Overall for single threaded programs the tlb flush code now performs better, for multi threaded programs it is slightly worse. In particular exit_mmap() now does a single IDTE for the mm and then just frees every page cache reference and every page table page directly without a delay over the mmu_gather structure. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22 18:52:44 +08:00
#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
static inline int ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep,
pte_t entry, int dirty)
{
if (pte_same(*ptep, entry))
return 0;
ptep_xchg_direct(vma->vm_mm, addr, ptep, entry);
return 1;
}
void set_pte_pgste_at(struct mm_struct *, unsigned long, pte_t *, pte_t);
/*
* Certain architectures need to do special things when PTEs
* within a page table are directly modified. Thus, the following
* hook is made available.
*/
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t entry)
{
if (mm_has_pgste(mm))
set_pte_pgste_at(mm, addr, ptep, entry);
else
s390/mm: implement software dirty bits The s390 architecture is unique in respect to dirty page detection, it uses the change bit in the per-page storage key to track page modifications. All other architectures track dirty bits by means of page table entries. This property of s390 has caused numerous problems in the past, e.g. see git commit ef5d437f71afdf4a "mm: fix XFS oops due to dirty pages without buffers on s390". To avoid future issues in regard to per-page dirty bits convert s390 to a fault based software dirty bit detection mechanism. All user page table entries which are marked as clean will be hardware read-only, even if the pte is supposed to be writable. A write by the user process will trigger a protection fault which will cause the user pte to be marked as dirty and the hardware read-only bit is removed. With this change the dirty bit in the storage key is irrelevant for Linux as a host, but the storage key is still required for KVM guests. The effect is that page_test_and_clear_dirty and the related code can be removed. The referenced bit in the storage key is still used by the page_test_and_clear_young primitive to provide page age information. For page cache pages of mappings with mapping_cap_account_dirty there will not be any change in behavior as the dirty bit tracking already uses read-only ptes to control the amount of dirty pages. Only for swap cache pages and pages of mappings without mapping_cap_account_dirty there can be additional protection faults. To avoid an excessive number of additional faults the mk_pte primitive checks for PageDirty if the pgprot value allows for writes and pre-dirties the pte. That avoids all additional faults for tmpfs and shmem pages until these pages are added to the swap cache. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 20:17:37 +08:00
*ptep = entry;
}
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*/
static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
{
pte_t __pte;
pte_val(__pte) = physpage + pgprot_val(pgprot);
return pte_mkyoung(__pte);
}
static inline pte_t mk_pte(struct page *page, pgprot_t pgprot)
{
unsigned long physpage = page_to_phys(page);
s390/mm: implement software dirty bits The s390 architecture is unique in respect to dirty page detection, it uses the change bit in the per-page storage key to track page modifications. All other architectures track dirty bits by means of page table entries. This property of s390 has caused numerous problems in the past, e.g. see git commit ef5d437f71afdf4a "mm: fix XFS oops due to dirty pages without buffers on s390". To avoid future issues in regard to per-page dirty bits convert s390 to a fault based software dirty bit detection mechanism. All user page table entries which are marked as clean will be hardware read-only, even if the pte is supposed to be writable. A write by the user process will trigger a protection fault which will cause the user pte to be marked as dirty and the hardware read-only bit is removed. With this change the dirty bit in the storage key is irrelevant for Linux as a host, but the storage key is still required for KVM guests. The effect is that page_test_and_clear_dirty and the related code can be removed. The referenced bit in the storage key is still used by the page_test_and_clear_young primitive to provide page age information. For page cache pages of mappings with mapping_cap_account_dirty there will not be any change in behavior as the dirty bit tracking already uses read-only ptes to control the amount of dirty pages. Only for swap cache pages and pages of mappings without mapping_cap_account_dirty there can be additional protection faults. To avoid an excessive number of additional faults the mk_pte primitive checks for PageDirty if the pgprot value allows for writes and pre-dirties the pte. That avoids all additional faults for tmpfs and shmem pages until these pages are added to the swap cache. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 20:17:37 +08:00
pte_t __pte = mk_pte_phys(physpage, pgprot);
if (pte_write(__pte) && PageDirty(page))
__pte = pte_mkdirty(__pte);
s390/mm: implement software dirty bits The s390 architecture is unique in respect to dirty page detection, it uses the change bit in the per-page storage key to track page modifications. All other architectures track dirty bits by means of page table entries. This property of s390 has caused numerous problems in the past, e.g. see git commit ef5d437f71afdf4a "mm: fix XFS oops due to dirty pages without buffers on s390". To avoid future issues in regard to per-page dirty bits convert s390 to a fault based software dirty bit detection mechanism. All user page table entries which are marked as clean will be hardware read-only, even if the pte is supposed to be writable. A write by the user process will trigger a protection fault which will cause the user pte to be marked as dirty and the hardware read-only bit is removed. With this change the dirty bit in the storage key is irrelevant for Linux as a host, but the storage key is still required for KVM guests. The effect is that page_test_and_clear_dirty and the related code can be removed. The referenced bit in the storage key is still used by the page_test_and_clear_young primitive to provide page age information. For page cache pages of mappings with mapping_cap_account_dirty there will not be any change in behavior as the dirty bit tracking already uses read-only ptes to control the amount of dirty pages. Only for swap cache pages and pages of mappings without mapping_cap_account_dirty there can be additional protection faults. To avoid an excessive number of additional faults the mk_pte primitive checks for PageDirty if the pgprot value allows for writes and pre-dirties the pte. That avoids all additional faults for tmpfs and shmem pages until these pages are added to the swap cache. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 20:17:37 +08:00
return __pte;
}
#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN)
#define pud_deref(pud) (pud_val(pud) & _REGION_ENTRY_ORIGIN)
#define pgd_deref(pgd) (pgd_val(pgd) & _REGION_ENTRY_ORIGIN)
static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
{
pud_t *pud = (pud_t *) pgd;
if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2)
pud = (pud_t *) pgd_deref(*pgd);
return pud + pud_index(address);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
pmd_t *pmd = (pmd_t *) pud;
if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3)
pmd = (pmd_t *) pud_deref(*pud);
return pmd + pmd_index(address);
}
#define pfn_pte(pfn,pgprot) mk_pte_phys(__pa((pfn) << PAGE_SHIFT),(pgprot))
#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
#define pte_page(x) pfn_to_page(pte_pfn(x))
#define pmd_page(pmd) pfn_to_page(pmd_pfn(pmd))
/* Find an entry in the lowest level page table.. */
#define pte_offset(pmd, addr) ((pte_t *) pmd_deref(*(pmd)) + pte_index(addr))
#define pte_offset_kernel(pmd, address) pte_offset(pmd,address)
#define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address)
#define pte_unmap(pte) do { } while (0)
mm/hugetlb: add more arch-defined huge_pte functions Commit abf09bed3cce ("s390/mm: implement software dirty bits") introduced another difference in the pte layout vs. the pmd layout on s390, thoroughly breaking the s390 support for hugetlbfs. This requires replacing some more pte_xxx functions in mm/hugetlbfs.c with a huge_pte_xxx version. This patch introduces those huge_pte_xxx functions and their generic implementation in asm-generic/hugetlb.h, which will now be included on all architectures supporting hugetlbfs apart from s390. This change will be a no-op for those architectures. [akpm@linux-foundation.org: fix warning] Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Michal Hocko <mhocko@suse.cz> [for !s390 parts] Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 06:07:23 +08:00
#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_HUGETLB_PAGE)
static inline unsigned long massage_pgprot_pmd(pgprot_t pgprot)
{
/*
* pgprot is PAGE_NONE, PAGE_READ, or PAGE_WRITE (see __Pxxx / __Sxxx)
* Convert to segment table entry format.
*/
if (pgprot_val(pgprot) == pgprot_val(PAGE_NONE))
return pgprot_val(SEGMENT_NONE);
if (pgprot_val(pgprot) == pgprot_val(PAGE_READ))
return pgprot_val(SEGMENT_READ);
return pgprot_val(SEGMENT_WRITE);
}
static inline pmd_t pmd_wrprotect(pmd_t pmd)
{
pmd_val(pmd) &= ~_SEGMENT_ENTRY_WRITE;
pmd_val(pmd) |= _SEGMENT_ENTRY_PROTECT;
return pmd;
}
static inline pmd_t pmd_mkwrite(pmd_t pmd)
{
pmd_val(pmd) |= _SEGMENT_ENTRY_WRITE;
if (pmd_large(pmd) && !(pmd_val(pmd) & _SEGMENT_ENTRY_DIRTY))
return pmd;
pmd_val(pmd) &= ~_SEGMENT_ENTRY_PROTECT;
return pmd;
}
static inline pmd_t pmd_mkclean(pmd_t pmd)
{
if (pmd_large(pmd)) {
pmd_val(pmd) &= ~_SEGMENT_ENTRY_DIRTY;
pmd_val(pmd) |= _SEGMENT_ENTRY_PROTECT;
}
return pmd;
}
static inline pmd_t pmd_mkdirty(pmd_t pmd)
{
if (pmd_large(pmd)) {
pmd_val(pmd) |= _SEGMENT_ENTRY_DIRTY |
_SEGMENT_ENTRY_SOFT_DIRTY;
if (pmd_val(pmd) & _SEGMENT_ENTRY_WRITE)
pmd_val(pmd) &= ~_SEGMENT_ENTRY_PROTECT;
}
return pmd;
}
static inline pmd_t pmd_mkyoung(pmd_t pmd)
{
if (pmd_large(pmd)) {
pmd_val(pmd) |= _SEGMENT_ENTRY_YOUNG;
if (pmd_val(pmd) & _SEGMENT_ENTRY_READ)
pmd_val(pmd) &= ~_SEGMENT_ENTRY_INVALID;
}
return pmd;
}
static inline pmd_t pmd_mkold(pmd_t pmd)
{
if (pmd_large(pmd)) {
pmd_val(pmd) &= ~_SEGMENT_ENTRY_YOUNG;
pmd_val(pmd) |= _SEGMENT_ENTRY_INVALID;
}
return pmd;
}
static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
{
if (pmd_large(pmd)) {
pmd_val(pmd) &= _SEGMENT_ENTRY_ORIGIN_LARGE |
_SEGMENT_ENTRY_DIRTY | _SEGMENT_ENTRY_YOUNG |
_SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_SOFT_DIRTY;
pmd_val(pmd) |= massage_pgprot_pmd(newprot);
if (!(pmd_val(pmd) & _SEGMENT_ENTRY_DIRTY))
pmd_val(pmd) |= _SEGMENT_ENTRY_PROTECT;
if (!(pmd_val(pmd) & _SEGMENT_ENTRY_YOUNG))
pmd_val(pmd) |= _SEGMENT_ENTRY_INVALID;
return pmd;
}
pmd_val(pmd) &= _SEGMENT_ENTRY_ORIGIN;
pmd_val(pmd) |= massage_pgprot_pmd(newprot);
return pmd;
}
mm/hugetlb: add more arch-defined huge_pte functions Commit abf09bed3cce ("s390/mm: implement software dirty bits") introduced another difference in the pte layout vs. the pmd layout on s390, thoroughly breaking the s390 support for hugetlbfs. This requires replacing some more pte_xxx functions in mm/hugetlbfs.c with a huge_pte_xxx version. This patch introduces those huge_pte_xxx functions and their generic implementation in asm-generic/hugetlb.h, which will now be included on all architectures supporting hugetlbfs apart from s390. This change will be a no-op for those architectures. [akpm@linux-foundation.org: fix warning] Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Michal Hocko <mhocko@suse.cz> [for !s390 parts] Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 06:07:23 +08:00
static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot)
{
mm/hugetlb: add more arch-defined huge_pte functions Commit abf09bed3cce ("s390/mm: implement software dirty bits") introduced another difference in the pte layout vs. the pmd layout on s390, thoroughly breaking the s390 support for hugetlbfs. This requires replacing some more pte_xxx functions in mm/hugetlbfs.c with a huge_pte_xxx version. This patch introduces those huge_pte_xxx functions and their generic implementation in asm-generic/hugetlb.h, which will now be included on all architectures supporting hugetlbfs apart from s390. This change will be a no-op for those architectures. [akpm@linux-foundation.org: fix warning] Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Michal Hocko <mhocko@suse.cz> [for !s390 parts] Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 06:07:23 +08:00
pmd_t __pmd;
pmd_val(__pmd) = physpage + massage_pgprot_pmd(pgprot);
return __pmd;
}
mm/hugetlb: add more arch-defined huge_pte functions Commit abf09bed3cce ("s390/mm: implement software dirty bits") introduced another difference in the pte layout vs. the pmd layout on s390, thoroughly breaking the s390 support for hugetlbfs. This requires replacing some more pte_xxx functions in mm/hugetlbfs.c with a huge_pte_xxx version. This patch introduces those huge_pte_xxx functions and their generic implementation in asm-generic/hugetlb.h, which will now be included on all architectures supporting hugetlbfs apart from s390. This change will be a no-op for those architectures. [akpm@linux-foundation.org: fix warning] Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Michal Hocko <mhocko@suse.cz> [for !s390 parts] Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 06:07:23 +08:00
#endif /* CONFIG_TRANSPARENT_HUGEPAGE || CONFIG_HUGETLB_PAGE */
static inline void __pmdp_csp(pmd_t *pmdp)
{
register unsigned long reg2 asm("2") = pmd_val(*pmdp);
register unsigned long reg3 asm("3") = pmd_val(*pmdp) |
_SEGMENT_ENTRY_INVALID;
register unsigned long reg4 asm("4") = ((unsigned long) pmdp) + 5;
asm volatile(
" csp %1,%3"
: "=m" (*pmdp)
: "d" (reg2), "d" (reg3), "d" (reg4), "m" (*pmdp) : "cc");
}
static inline void __pmdp_idte(unsigned long address, pmd_t *pmdp)
{
unsigned long sto;
sto = (unsigned long) pmdp - pmd_index(address) * sizeof(pmd_t);
asm volatile(
" .insn rrf,0xb98e0000,%2,%3,0,0"
: "=m" (*pmdp)
: "m" (*pmdp), "a" (sto), "a" ((address & HPAGE_MASK))
: "cc" );
}
static inline void __pmdp_idte_local(unsigned long address, pmd_t *pmdp)
{
unsigned long sto;
sto = (unsigned long) pmdp - pmd_index(address) * sizeof(pmd_t);
asm volatile(
" .insn rrf,0xb98e0000,%2,%3,0,1"
: "=m" (*pmdp)
: "m" (*pmdp), "a" (sto), "a" ((address & HPAGE_MASK))
: "cc" );
}
static inline void pmdp_flush_direct(struct mm_struct *mm,
unsigned long address, pmd_t *pmdp)
{
int active, count;
if (pmd_val(*pmdp) & _SEGMENT_ENTRY_INVALID)
return;
if (!MACHINE_HAS_IDTE) {
__pmdp_csp(pmdp);
return;
}
active = (mm == current->active_mm) ? 1 : 0;
count = atomic_add_return(0x10000, &mm->context.attach_count);
if (MACHINE_HAS_TLB_LC && (count & 0xffff) <= active &&
cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id())))
__pmdp_idte_local(address, pmdp);
else
__pmdp_idte(address, pmdp);
atomic_sub(0x10000, &mm->context.attach_count);
}
static inline void pmdp_flush_lazy(struct mm_struct *mm,
unsigned long address, pmd_t *pmdp)
{
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 19:00:09 +08:00
int active, count;
if (pmd_val(*pmdp) & _SEGMENT_ENTRY_INVALID)
return;
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 19:00:09 +08:00
active = (mm == current->active_mm) ? 1 : 0;
count = atomic_add_return(0x10000, &mm->context.attach_count);
if ((count & 0xffff) <= active) {
pmd_val(*pmdp) |= _SEGMENT_ENTRY_INVALID;
mm->context.flush_mm = 1;
} else if (MACHINE_HAS_IDTE)
__pmdp_idte(address, pmdp);
else
__pmdp_csp(pmdp);
s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries Git commit 050eef364ad70059 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-10 19:00:09 +08:00
atomic_sub(0x10000, &mm->context.attach_count);
}
mm/hugetlb: add more arch-defined huge_pte functions Commit abf09bed3cce ("s390/mm: implement software dirty bits") introduced another difference in the pte layout vs. the pmd layout on s390, thoroughly breaking the s390 support for hugetlbfs. This requires replacing some more pte_xxx functions in mm/hugetlbfs.c with a huge_pte_xxx version. This patch introduces those huge_pte_xxx functions and their generic implementation in asm-generic/hugetlb.h, which will now be included on all architectures supporting hugetlbfs apart from s390. This change will be a no-op for those architectures. [akpm@linux-foundation.org: fix warning] Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Michal Hocko <mhocko@suse.cz> [for !s390 parts] Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 06:07:23 +08:00
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define __HAVE_ARCH_PGTABLE_DEPOSIT
extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
pgtable_t pgtable);
mm/hugetlb: add more arch-defined huge_pte functions Commit abf09bed3cce ("s390/mm: implement software dirty bits") introduced another difference in the pte layout vs. the pmd layout on s390, thoroughly breaking the s390 support for hugetlbfs. This requires replacing some more pte_xxx functions in mm/hugetlbfs.c with a huge_pte_xxx version. This patch introduces those huge_pte_xxx functions and their generic implementation in asm-generic/hugetlb.h, which will now be included on all architectures supporting hugetlbfs apart from s390. This change will be a no-op for those architectures. [akpm@linux-foundation.org: fix warning] Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Michal Hocko <mhocko@suse.cz> [for !s390 parts] Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 06:07:23 +08:00
#define __HAVE_ARCH_PGTABLE_WITHDRAW
extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
mm/hugetlb: add more arch-defined huge_pte functions Commit abf09bed3cce ("s390/mm: implement software dirty bits") introduced another difference in the pte layout vs. the pmd layout on s390, thoroughly breaking the s390 support for hugetlbfs. This requires replacing some more pte_xxx functions in mm/hugetlbfs.c with a huge_pte_xxx version. This patch introduces those huge_pte_xxx functions and their generic implementation in asm-generic/hugetlb.h, which will now be included on all architectures supporting hugetlbfs apart from s390. This change will be a no-op for those architectures. [akpm@linux-foundation.org: fix warning] Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Michal Hocko <mhocko@suse.cz> [for !s390 parts] Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 06:07:23 +08:00
static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
pmd_t *pmdp, pmd_t entry)
{
*pmdp = entry;
}
static inline pmd_t pmd_mkhuge(pmd_t pmd)
{
pmd_val(pmd) |= _SEGMENT_ENTRY_LARGE;
pmd_val(pmd) |= _SEGMENT_ENTRY_YOUNG;
pmd_val(pmd) |= _SEGMENT_ENTRY_PROTECT;
return pmd;
}
#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp)
{
pmd_t pmd;
pmd = *pmdp;
pmdp_flush_direct(vma->vm_mm, address, pmdp);
*pmdp = pmd_mkold(pmd);
return pmd_young(pmd);
}
#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
unsigned long address, pmd_t *pmdp)
{
pmd_t pmd = *pmdp;
pmdp_flush_direct(mm, address, pmdp);
pmd_clear(pmdp);
return pmd;
}
#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR_FULL
static inline pmd_t pmdp_huge_get_and_clear_full(struct mm_struct *mm,
unsigned long address,
pmd_t *pmdp, int full)
{
pmd_t pmd = *pmdp;
if (!full)
pmdp_flush_lazy(mm, address, pmdp);
pmd_clear(pmdp);
return pmd;
}
#define __HAVE_ARCH_PMDP_HUGE_CLEAR_FLUSH
static inline pmd_t pmdp_huge_clear_flush(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp)
{
return pmdp_huge_get_and_clear(vma->vm_mm, address, pmdp);
}
#define __HAVE_ARCH_PMDP_INVALIDATE
static inline void pmdp_invalidate(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp)
{
pmdp_flush_direct(vma->vm_mm, address, pmdp);
}
#define __HAVE_ARCH_PMDP_SET_WRPROTECT
static inline void pmdp_set_wrprotect(struct mm_struct *mm,
unsigned long address, pmd_t *pmdp)
{
pmd_t pmd = *pmdp;
if (pmd_write(pmd)) {
pmdp_flush_direct(mm, address, pmdp);
set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd));
}
}
static inline pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
unsigned long address,
pmd_t *pmdp)
{
return pmdp_huge_get_and_clear(vma->vm_mm, address, pmdp);
}
#define pmdp_collapse_flush pmdp_collapse_flush
#define pfn_pmd(pfn, pgprot) mk_pmd_phys(__pa((pfn) << PAGE_SHIFT), (pgprot))
#define mk_pmd(page, pgprot) pfn_pmd(page_to_pfn(page), (pgprot))
static inline int pmd_trans_huge(pmd_t pmd)
{
return pmd_val(pmd) & _SEGMENT_ENTRY_LARGE;
}
static inline int has_transparent_hugepage(void)
{
return MACHINE_HAS_HPAGE ? 1 : 0;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
/*
* 64 bit swap entry format:
* A page-table entry has some bits we have to treat in a special way.
* Bits 52 and bit 55 have to be zero, otherwise a specification
* exception will occur instead of a page translation exception. The
* specification exception has the bad habit not to store necessary
* information in the lowcore.
* Bits 54 and 63 are used to indicate the page type.
* A swap pte is indicated by bit pattern (pte & 0x201) == 0x200
* This leaves the bits 0-51 and bits 56-62 to store type and offset.
* We use the 5 bits from 57-61 for the type and the 52 bits from 0-51
* for the offset.
* | offset |01100|type |00|
* |0000000000111111111122222222223333333333444444444455|55555|55566|66|
* |0123456789012345678901234567890123456789012345678901|23456|78901|23|
*/
#define __SWP_OFFSET_MASK ((1UL << 52) - 1)
#define __SWP_OFFSET_SHIFT 12
#define __SWP_TYPE_MASK ((1UL << 5) - 1)
#define __SWP_TYPE_SHIFT 2
static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
{
pte_t pte;
pte_val(pte) = _PAGE_INVALID | _PAGE_PROTECT;
pte_val(pte) |= (offset & __SWP_OFFSET_MASK) << __SWP_OFFSET_SHIFT;
pte_val(pte) |= (type & __SWP_TYPE_MASK) << __SWP_TYPE_SHIFT;
return pte;
}
static inline unsigned long __swp_type(swp_entry_t entry)
{
return (entry.val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK;
}
static inline unsigned long __swp_offset(swp_entry_t entry)
{
return (entry.val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK;
}
static inline swp_entry_t __swp_entry(unsigned long type, unsigned long offset)
{
return (swp_entry_t) { pte_val(mk_swap_pte(type, offset)) };
}
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
#endif /* !__ASSEMBLY__ */
#define kern_addr_valid(addr) (1)
extern int vmem_add_mapping(unsigned long start, unsigned long size);
extern int vmem_remove_mapping(unsigned long start, unsigned long size);
extern int s390_enable_sie(void);
extern int s390_enable_skey(void);
extern void s390_reset_cmma(struct mm_struct *mm);
/* s390 has a private copy of get unmapped area to deal with cache synonyms */
#define HAVE_ARCH_UNMAPPED_AREA
#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
/*
* No page table caches to initialise
*/
static inline void pgtable_cache_init(void) { }
static inline void check_pgt_cache(void) { }
#include <asm-generic/pgtable.h>
#endif /* _S390_PAGE_H */