linux/mm/process_vm_access.c

492 lines
13 KiB
C
Raw Normal View History

Cross Memory Attach The basic idea behind cross memory attach is to allow MPI programs doing intra-node communication to do a single copy of the message rather than a double copy of the message via shared memory. The following patch attempts to achieve this by allowing a destination process, given an address and size from a source process, to copy memory directly from the source process into its own address space via a system call. There is also a symmetrical ability to copy from the current process's address space into a destination process's address space. - Use of /proc/pid/mem has been considered, but there are issues with using it: - Does not allow for specifying iovecs for both src and dest, assuming preadv or pwritev was implemented either the area read from or written to would need to be contiguous. - Currently mem_read allows only processes who are currently ptrace'ing the target and are still able to ptrace the target to read from the target. This check could possibly be moved to the open call, but its not clear exactly what race this restriction is stopping (reason appears to have been lost) - Having to send the fd of /proc/self/mem via SCM_RIGHTS on unix domain socket is a bit ugly from a userspace point of view, especially when you may have hundreds if not (eventually) thousands of processes that all need to do this with each other - Doesn't allow for some future use of the interface we would like to consider adding in the future (see below) - Interestingly reading from /proc/pid/mem currently actually involves two copies! (But this could be fixed pretty easily) As mentioned previously use of vmsplice instead was considered, but has problems. Since you need the reader and writer working co-operatively if the pipe is not drained then you block. Which requires some wrapping to do non blocking on the send side or polling on the receive. In all to all communication it requires ordering otherwise you can deadlock. And in the example of many MPI tasks writing to one MPI task vmsplice serialises the copying. There are some cases of MPI collectives where even a single copy interface does not get us the performance gain we could. For example in an MPI_Reduce rather than copy the data from the source we would like to instead use it directly in a mathops (say the reduce is doing a sum) as this would save us doing a copy. We don't need to keep a copy of the data from the source. I haven't implemented this, but I think this interface could in the future do all this through the use of the flags - eg could specify the math operation and type and the kernel rather than just copying the data would apply the specified operation between the source and destination and store it in the destination. Although we don't have a "second user" of the interface (though I've had some nibbles from people who may be interested in using it for intra process messaging which is not MPI). This interface is something which hardware vendors are already doing for their custom drivers to implement fast local communication. And so in addition to this being useful for OpenMPI it would mean the driver maintainers don't have to fix things up when the mm changes. There was some discussion about how much faster a true zero copy would go. Here's a link back to the email with some testing I did on that: http://marc.info/?l=linux-mm&m=130105930902915&w=2 There is a basic man page for the proposed interface here: http://ozlabs.org/~cyeoh/cma/process_vm_readv.txt This has been implemented for x86 and powerpc, other architecture should mainly (I think) just need to add syscall numbers for the process_vm_readv and process_vm_writev. There are 32 bit compatibility versions for 64-bit kernels. For arch maintainers there are some simple tests to be able to quickly verify that the syscalls are working correctly here: http://ozlabs.org/~cyeoh/cma/cma-test-20110718.tgz Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: <linux-man@vger.kernel.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 08:06:39 +08:00
/*
* linux/mm/process_vm_access.c
*
* Copyright (C) 2010-2011 Christopher Yeoh <cyeoh@au1.ibm.com>, IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/mm.h>
#include <linux/uio.h>
#include <linux/sched.h>
#include <linux/highmem.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/syscalls.h>
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
#endif
/**
* process_vm_rw_pages - read/write pages from task specified
* @task: task to read/write from
* @mm: mm for task
* @process_pages: struct pages area that can store at least
* nr_pages_to_copy struct page pointers
* @pa: address of page in task to start copying from/to
* @start_offset: offset in page to start copying from/to
* @len: number of bytes to copy
* @lvec: iovec array specifying where to copy to/from
* @lvec_cnt: number of elements in iovec array
* @lvec_current: index in iovec array we are up to
* @lvec_offset: offset in bytes from current iovec iov_base we are up to
* @vm_write: 0 means copy from, 1 means copy to
* @nr_pages_to_copy: number of pages to copy
* @bytes_copied: returns number of bytes successfully copied
* Returns 0 on success, error code otherwise
*/
static int process_vm_rw_pages(struct task_struct *task,
struct mm_struct *mm,
struct page **process_pages,
unsigned long pa,
unsigned long start_offset,
unsigned long len,
const struct iovec *lvec,
unsigned long lvec_cnt,
unsigned long *lvec_current,
size_t *lvec_offset,
int vm_write,
unsigned int nr_pages_to_copy,
ssize_t *bytes_copied)
{
int pages_pinned;
void *target_kaddr;
int pgs_copied = 0;
int j;
int ret;
ssize_t bytes_to_copy;
ssize_t rc = 0;
*bytes_copied = 0;
/* Get the pages we're interested in */
down_read(&mm->mmap_sem);
pages_pinned = get_user_pages(task, mm, pa,
nr_pages_to_copy,
vm_write, 0, process_pages, NULL);
up_read(&mm->mmap_sem);
if (pages_pinned != nr_pages_to_copy) {
rc = -EFAULT;
goto end;
}
/* Do the copy for each page */
for (pgs_copied = 0;
(pgs_copied < nr_pages_to_copy) && (*lvec_current < lvec_cnt);
pgs_copied++) {
/* Make sure we have a non zero length iovec */
while (*lvec_current < lvec_cnt
&& lvec[*lvec_current].iov_len == 0)
(*lvec_current)++;
if (*lvec_current == lvec_cnt)
break;
/*
* Will copy smallest of:
* - bytes remaining in page
* - bytes remaining in destination iovec
*/
bytes_to_copy = min_t(ssize_t, PAGE_SIZE - start_offset,
len - *bytes_copied);
bytes_to_copy = min_t(ssize_t, bytes_to_copy,
lvec[*lvec_current].iov_len
- *lvec_offset);
target_kaddr = kmap(process_pages[pgs_copied]) + start_offset;
if (vm_write)
ret = copy_from_user(target_kaddr,
lvec[*lvec_current].iov_base
+ *lvec_offset,
bytes_to_copy);
else
ret = copy_to_user(lvec[*lvec_current].iov_base
+ *lvec_offset,
target_kaddr, bytes_to_copy);
kunmap(process_pages[pgs_copied]);
if (ret) {
*bytes_copied += bytes_to_copy - ret;
pgs_copied++;
rc = -EFAULT;
goto end;
}
*bytes_copied += bytes_to_copy;
*lvec_offset += bytes_to_copy;
if (*lvec_offset == lvec[*lvec_current].iov_len) {
/*
* Need to copy remaining part of page into the
* next iovec if there are any bytes left in page
*/
(*lvec_current)++;
*lvec_offset = 0;
start_offset = (start_offset + bytes_to_copy)
% PAGE_SIZE;
if (start_offset)
pgs_copied--;
} else {
start_offset = 0;
}
}
end:
if (vm_write) {
for (j = 0; j < pages_pinned; j++) {
if (j < pgs_copied)
set_page_dirty_lock(process_pages[j]);
put_page(process_pages[j]);
}
} else {
for (j = 0; j < pages_pinned; j++)
put_page(process_pages[j]);
}
return rc;
}
/* Maximum number of pages kmalloc'd to hold struct page's during copy */
#define PVM_MAX_KMALLOC_PAGES (PAGE_SIZE * 2)
/**
* process_vm_rw_single_vec - read/write pages from task specified
* @addr: start memory address of target process
* @len: size of area to copy to/from
* @lvec: iovec array specifying where to copy to/from locally
* @lvec_cnt: number of elements in iovec array
* @lvec_current: index in iovec array we are up to
* @lvec_offset: offset in bytes from current iovec iov_base we are up to
* @process_pages: struct pages area that can store at least
* nr_pages_to_copy struct page pointers
* @mm: mm for task
* @task: task to read/write from
* @vm_write: 0 means copy from, 1 means copy to
* @bytes_copied: returns number of bytes successfully copied
* Returns 0 on success or on failure error code
*/
static int process_vm_rw_single_vec(unsigned long addr,
unsigned long len,
const struct iovec *lvec,
unsigned long lvec_cnt,
unsigned long *lvec_current,
size_t *lvec_offset,
struct page **process_pages,
struct mm_struct *mm,
struct task_struct *task,
int vm_write,
ssize_t *bytes_copied)
{
unsigned long pa = addr & PAGE_MASK;
unsigned long start_offset = addr - pa;
unsigned long nr_pages;
ssize_t bytes_copied_loop;
ssize_t rc = 0;
unsigned long nr_pages_copied = 0;
unsigned long nr_pages_to_copy;
unsigned long max_pages_per_loop = PVM_MAX_KMALLOC_PAGES
/ sizeof(struct pages *);
*bytes_copied = 0;
/* Work out address and page range required */
if (len == 0)
return 0;
nr_pages = (addr + len - 1) / PAGE_SIZE - addr / PAGE_SIZE + 1;
while ((nr_pages_copied < nr_pages) && (*lvec_current < lvec_cnt)) {
nr_pages_to_copy = min(nr_pages - nr_pages_copied,
max_pages_per_loop);
rc = process_vm_rw_pages(task, mm, process_pages, pa,
start_offset, len,
lvec, lvec_cnt,
lvec_current, lvec_offset,
vm_write, nr_pages_to_copy,
&bytes_copied_loop);
start_offset = 0;
*bytes_copied += bytes_copied_loop;
if (rc < 0) {
return rc;
} else {
len -= bytes_copied_loop;
nr_pages_copied += nr_pages_to_copy;
pa += nr_pages_to_copy * PAGE_SIZE;
}
}
return rc;
}
/* Maximum number of entries for process pages array
which lives on stack */
#define PVM_MAX_PP_ARRAY_COUNT 16
/**
* process_vm_rw_core - core of reading/writing pages from task specified
* @pid: PID of process to read/write from/to
* @lvec: iovec array specifying where to copy to/from locally
* @liovcnt: size of lvec array
* @rvec: iovec array specifying where to copy to/from in the other process
* @riovcnt: size of rvec array
* @flags: currently unused
* @vm_write: 0 if reading from other process, 1 if writing to other process
* Returns the number of bytes read/written or error code. May
* return less bytes than expected if an error occurs during the copying
* process.
*/
static ssize_t process_vm_rw_core(pid_t pid, const struct iovec *lvec,
unsigned long liovcnt,
const struct iovec *rvec,
unsigned long riovcnt,
unsigned long flags, int vm_write)
{
struct task_struct *task;
struct page *pp_stack[PVM_MAX_PP_ARRAY_COUNT];
struct page **process_pages = pp_stack;
struct mm_struct *mm;
unsigned long i;
ssize_t rc = 0;
ssize_t bytes_copied_loop;
ssize_t bytes_copied = 0;
unsigned long nr_pages = 0;
unsigned long nr_pages_iov;
unsigned long iov_l_curr_idx = 0;
size_t iov_l_curr_offset = 0;
ssize_t iov_len;
/*
* Work out how many pages of struct pages we're going to need
* when eventually calling get_user_pages
*/
for (i = 0; i < riovcnt; i++) {
iov_len = rvec[i].iov_len;
if (iov_len > 0) {
nr_pages_iov = ((unsigned long)rvec[i].iov_base
+ iov_len)
/ PAGE_SIZE - (unsigned long)rvec[i].iov_base
/ PAGE_SIZE + 1;
nr_pages = max(nr_pages, nr_pages_iov);
}
}
if (nr_pages == 0)
return 0;
if (nr_pages > PVM_MAX_PP_ARRAY_COUNT) {
/* For reliability don't try to kmalloc more than
2 pages worth */
process_pages = kmalloc(min_t(size_t, PVM_MAX_KMALLOC_PAGES,
sizeof(struct pages *)*nr_pages),
GFP_KERNEL);
if (!process_pages)
return -ENOMEM;
}
/* Get process information */
rcu_read_lock();
task = find_task_by_vpid(pid);
if (task)
get_task_struct(task);
rcu_read_unlock();
if (!task) {
rc = -ESRCH;
goto free_proc_pages;
}
mm = mm_access(task, PTRACE_MODE_ATTACH);
if (!mm || IS_ERR(mm)) {
rc = IS_ERR(mm) ? PTR_ERR(mm) : -ESRCH;
/*
* Explicitly map EACCES to EPERM as EPERM is a more a
* appropriate error code for process_vw_readv/writev
*/
if (rc == -EACCES)
rc = -EPERM;
Cross Memory Attach The basic idea behind cross memory attach is to allow MPI programs doing intra-node communication to do a single copy of the message rather than a double copy of the message via shared memory. The following patch attempts to achieve this by allowing a destination process, given an address and size from a source process, to copy memory directly from the source process into its own address space via a system call. There is also a symmetrical ability to copy from the current process's address space into a destination process's address space. - Use of /proc/pid/mem has been considered, but there are issues with using it: - Does not allow for specifying iovecs for both src and dest, assuming preadv or pwritev was implemented either the area read from or written to would need to be contiguous. - Currently mem_read allows only processes who are currently ptrace'ing the target and are still able to ptrace the target to read from the target. This check could possibly be moved to the open call, but its not clear exactly what race this restriction is stopping (reason appears to have been lost) - Having to send the fd of /proc/self/mem via SCM_RIGHTS on unix domain socket is a bit ugly from a userspace point of view, especially when you may have hundreds if not (eventually) thousands of processes that all need to do this with each other - Doesn't allow for some future use of the interface we would like to consider adding in the future (see below) - Interestingly reading from /proc/pid/mem currently actually involves two copies! (But this could be fixed pretty easily) As mentioned previously use of vmsplice instead was considered, but has problems. Since you need the reader and writer working co-operatively if the pipe is not drained then you block. Which requires some wrapping to do non blocking on the send side or polling on the receive. In all to all communication it requires ordering otherwise you can deadlock. And in the example of many MPI tasks writing to one MPI task vmsplice serialises the copying. There are some cases of MPI collectives where even a single copy interface does not get us the performance gain we could. For example in an MPI_Reduce rather than copy the data from the source we would like to instead use it directly in a mathops (say the reduce is doing a sum) as this would save us doing a copy. We don't need to keep a copy of the data from the source. I haven't implemented this, but I think this interface could in the future do all this through the use of the flags - eg could specify the math operation and type and the kernel rather than just copying the data would apply the specified operation between the source and destination and store it in the destination. Although we don't have a "second user" of the interface (though I've had some nibbles from people who may be interested in using it for intra process messaging which is not MPI). This interface is something which hardware vendors are already doing for their custom drivers to implement fast local communication. And so in addition to this being useful for OpenMPI it would mean the driver maintainers don't have to fix things up when the mm changes. There was some discussion about how much faster a true zero copy would go. Here's a link back to the email with some testing I did on that: http://marc.info/?l=linux-mm&m=130105930902915&w=2 There is a basic man page for the proposed interface here: http://ozlabs.org/~cyeoh/cma/process_vm_readv.txt This has been implemented for x86 and powerpc, other architecture should mainly (I think) just need to add syscall numbers for the process_vm_readv and process_vm_writev. There are 32 bit compatibility versions for 64-bit kernels. For arch maintainers there are some simple tests to be able to quickly verify that the syscalls are working correctly here: http://ozlabs.org/~cyeoh/cma/cma-test-20110718.tgz Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: <linux-man@vger.kernel.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 08:06:39 +08:00
goto put_task_struct;
}
for (i = 0; i < riovcnt && iov_l_curr_idx < liovcnt; i++) {
rc = process_vm_rw_single_vec(
(unsigned long)rvec[i].iov_base, rvec[i].iov_len,
lvec, liovcnt, &iov_l_curr_idx, &iov_l_curr_offset,
process_pages, mm, task, vm_write, &bytes_copied_loop);
bytes_copied += bytes_copied_loop;
if (rc != 0) {
/* If we have managed to copy any data at all then
we return the number of bytes copied. Otherwise
we return the error code */
if (bytes_copied)
rc = bytes_copied;
goto put_mm;
}
}
rc = bytes_copied;
put_mm:
mmput(mm);
put_task_struct:
put_task_struct(task);
free_proc_pages:
if (process_pages != pp_stack)
kfree(process_pages);
return rc;
}
/**
* process_vm_rw - check iovecs before calling core routine
* @pid: PID of process to read/write from/to
* @lvec: iovec array specifying where to copy to/from locally
* @liovcnt: size of lvec array
* @rvec: iovec array specifying where to copy to/from in the other process
* @riovcnt: size of rvec array
* @flags: currently unused
* @vm_write: 0 if reading from other process, 1 if writing to other process
* Returns the number of bytes read/written or error code. May
* return less bytes than expected if an error occurs during the copying
* process.
*/
static ssize_t process_vm_rw(pid_t pid,
const struct iovec __user *lvec,
unsigned long liovcnt,
const struct iovec __user *rvec,
unsigned long riovcnt,
unsigned long flags, int vm_write)
{
struct iovec iovstack_l[UIO_FASTIOV];
struct iovec iovstack_r[UIO_FASTIOV];
struct iovec *iov_l = iovstack_l;
struct iovec *iov_r = iovstack_r;
ssize_t rc;
if (flags != 0)
return -EINVAL;
/* Check iovecs */
if (vm_write)
rc = rw_copy_check_uvector(WRITE, lvec, liovcnt, UIO_FASTIOV,
iovstack_l, &iov_l, 1);
else
rc = rw_copy_check_uvector(READ, lvec, liovcnt, UIO_FASTIOV,
iovstack_l, &iov_l, 1);
if (rc <= 0)
goto free_iovecs;
rc = rw_copy_check_uvector(READ, rvec, riovcnt, UIO_FASTIOV,
iovstack_r, &iov_r, 0);
if (rc <= 0)
goto free_iovecs;
rc = process_vm_rw_core(pid, iov_l, liovcnt, iov_r, riovcnt, flags,
vm_write);
free_iovecs:
if (iov_r != iovstack_r)
kfree(iov_r);
if (iov_l != iovstack_l)
kfree(iov_l);
return rc;
}
SYSCALL_DEFINE6(process_vm_readv, pid_t, pid, const struct iovec __user *, lvec,
unsigned long, liovcnt, const struct iovec __user *, rvec,
unsigned long, riovcnt, unsigned long, flags)
{
return process_vm_rw(pid, lvec, liovcnt, rvec, riovcnt, flags, 0);
}
SYSCALL_DEFINE6(process_vm_writev, pid_t, pid,
const struct iovec __user *, lvec,
unsigned long, liovcnt, const struct iovec __user *, rvec,
unsigned long, riovcnt, unsigned long, flags)
{
return process_vm_rw(pid, lvec, liovcnt, rvec, riovcnt, flags, 1);
}
#ifdef CONFIG_COMPAT
asmlinkage ssize_t
compat_process_vm_rw(compat_pid_t pid,
const struct compat_iovec __user *lvec,
unsigned long liovcnt,
const struct compat_iovec __user *rvec,
unsigned long riovcnt,
unsigned long flags, int vm_write)
{
struct iovec iovstack_l[UIO_FASTIOV];
struct iovec iovstack_r[UIO_FASTIOV];
struct iovec *iov_l = iovstack_l;
struct iovec *iov_r = iovstack_r;
ssize_t rc = -EFAULT;
if (flags != 0)
return -EINVAL;
if (!access_ok(VERIFY_READ, lvec, liovcnt * sizeof(*lvec)))
goto out;
if (!access_ok(VERIFY_READ, rvec, riovcnt * sizeof(*rvec)))
goto out;
if (vm_write)
rc = compat_rw_copy_check_uvector(WRITE, lvec, liovcnt,
UIO_FASTIOV, iovstack_l,
&iov_l, 1);
else
rc = compat_rw_copy_check_uvector(READ, lvec, liovcnt,
UIO_FASTIOV, iovstack_l,
&iov_l, 1);
if (rc <= 0)
goto free_iovecs;
rc = compat_rw_copy_check_uvector(READ, rvec, riovcnt,
UIO_FASTIOV, iovstack_r,
&iov_r, 0);
if (rc <= 0)
goto free_iovecs;
rc = process_vm_rw_core(pid, iov_l, liovcnt, iov_r, riovcnt, flags,
vm_write);
free_iovecs:
if (iov_r != iovstack_r)
kfree(iov_r);
if (iov_l != iovstack_l)
kfree(iov_l);
out:
return rc;
}
asmlinkage ssize_t
compat_sys_process_vm_readv(compat_pid_t pid,
const struct compat_iovec __user *lvec,
unsigned long liovcnt,
const struct compat_iovec __user *rvec,
unsigned long riovcnt,
unsigned long flags)
{
return compat_process_vm_rw(pid, lvec, liovcnt, rvec,
riovcnt, flags, 0);
}
asmlinkage ssize_t
compat_sys_process_vm_writev(compat_pid_t pid,
const struct compat_iovec __user *lvec,
unsigned long liovcnt,
const struct compat_iovec __user *rvec,
unsigned long riovcnt,
unsigned long flags)
{
return compat_process_vm_rw(pid, lvec, liovcnt, rvec,
riovcnt, flags, 1);
}
#endif