2008-01-25 10:46:06 +08:00
|
|
|
/*
|
|
|
|
* MPC8315E RDB Device Tree Source
|
|
|
|
*
|
|
|
|
* Copyright 2007 Freescale Semiconductor Inc.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
* option) any later version.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
|
|
|
|
/ {
|
|
|
|
compatible = "fsl,mpc8315erdb";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
ethernet0 = &enet0;
|
|
|
|
ethernet1 = &enet1;
|
|
|
|
serial0 = &serial0;
|
|
|
|
serial1 = &serial1;
|
|
|
|
pci0 = &pci0;
|
|
|
|
};
|
|
|
|
|
|
|
|
cpus {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
PowerPC,8315@0 {
|
|
|
|
device_type = "cpu";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
reg = <0x0>;
|
2008-01-25 10:46:06 +08:00
|
|
|
d-cache-line-size = <32>;
|
|
|
|
i-cache-line-size = <32>;
|
|
|
|
d-cache-size = <16384>;
|
|
|
|
i-cache-size = <16384>;
|
|
|
|
timebase-frequency = <0>; // from bootloader
|
|
|
|
bus-frequency = <0>; // from bootloader
|
|
|
|
clock-frequency = <0>; // from bootloader
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
memory {
|
|
|
|
device_type = "memory";
|
|
|
|
reg = <0x00000000 0x08000000>; // 128MB at 0
|
|
|
|
};
|
|
|
|
|
|
|
|
localbus@e0005000 {
|
|
|
|
#address-cells = <2>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
|
|
|
|
reg = <0xe0005000 0x1000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupts = <77 0x8>;
|
2008-01-25 10:46:06 +08:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
|
|
|
// CS0 and CS1 are swapped when
|
|
|
|
// booting from nand, but the
|
|
|
|
// addresses are the same.
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
ranges = <0x0 0x0 0xfe000000 0x00800000
|
|
|
|
0x1 0x0 0xe0600000 0x00002000
|
|
|
|
0x2 0x0 0xf0000000 0x00020000
|
|
|
|
0x3 0x0 0xfa000000 0x00008000>;
|
2008-01-25 10:46:06 +08:00
|
|
|
|
|
|
|
flash@0,0 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
compatible = "cfi-flash";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
reg = <0x0 0x0 0x800000>;
|
2008-01-25 10:46:06 +08:00
|
|
|
bank-width = <2>;
|
|
|
|
device-width = <1>;
|
|
|
|
};
|
|
|
|
|
|
|
|
nand@1,0 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
compatible = "fsl,mpc8315-fcm-nand",
|
|
|
|
"fsl,elbc-fcm-nand";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
reg = <0x1 0x0 0x2000>;
|
2008-01-25 10:46:06 +08:00
|
|
|
|
|
|
|
u-boot@0 {
|
|
|
|
reg = <0x0 0x100000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
|
|
|
|
kernel@100000 {
|
|
|
|
reg = <0x100000 0x300000>;
|
|
|
|
};
|
|
|
|
fs@400000 {
|
|
|
|
reg = <0x400000 0x1c00000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
immr@e0000000 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
device_type = "soc";
|
2008-01-31 02:46:19 +08:00
|
|
|
compatible = "fsl,mpc8315-immr", "simple-bus";
|
2008-01-25 10:46:06 +08:00
|
|
|
ranges = <0 0xe0000000 0x00100000>;
|
|
|
|
reg = <0xe0000000 0x00000200>;
|
|
|
|
bus-frequency = <0>;
|
|
|
|
|
|
|
|
wdt@200 {
|
|
|
|
device_type = "watchdog";
|
|
|
|
compatible = "mpc83xx_wdt";
|
|
|
|
reg = <0x200 0x100>;
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c@3000 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
cell-index = <0>;
|
|
|
|
compatible = "fsl-i2c";
|
|
|
|
reg = <0x3000 0x100>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupts = <14 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-25 10:46:06 +08:00
|
|
|
dfsrr;
|
|
|
|
rtc@68 {
|
|
|
|
device_type = "rtc";
|
|
|
|
compatible = "dallas,ds1339";
|
|
|
|
reg = <0x68>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
spi@7000 {
|
|
|
|
cell-index = <0>;
|
|
|
|
compatible = "fsl,spi";
|
|
|
|
reg = <0x7000 0x1000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupts = <16 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-25 10:46:06 +08:00
|
|
|
mode = "cpu";
|
|
|
|
};
|
|
|
|
|
2008-06-28 02:45:19 +08:00
|
|
|
dma@82a8 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
|
|
|
|
reg = <0x82a8 4>;
|
|
|
|
ranges = <0 0x8100 0x1a8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <71 8>;
|
|
|
|
cell-index = <0>;
|
|
|
|
dma-channel@0 {
|
|
|
|
compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
reg = <0 0x80>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <71 8>;
|
|
|
|
};
|
|
|
|
dma-channel@80 {
|
|
|
|
compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
reg = <0x80 0x80>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <71 8>;
|
|
|
|
};
|
|
|
|
dma-channel@100 {
|
|
|
|
compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
reg = <0x100 0x80>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <71 8>;
|
|
|
|
};
|
|
|
|
dma-channel@180 {
|
|
|
|
compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
reg = <0x180 0x28>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <71 8>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2008-01-25 10:46:06 +08:00
|
|
|
usb@23000 {
|
|
|
|
compatible = "fsl-usb2-dr";
|
|
|
|
reg = <0x23000 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <38 0x8>;
|
2008-01-25 10:46:06 +08:00
|
|
|
phy_type = "utmi";
|
|
|
|
};
|
|
|
|
|
|
|
|
mdio@24520 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
compatible = "fsl,gianfar-mdio";
|
|
|
|
reg = <0x24520 0x20>;
|
|
|
|
phy0: ethernet-phy@0 {
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <20 0x8>;
|
|
|
|
reg = <0x0>;
|
2008-01-25 10:46:06 +08:00
|
|
|
device_type = "ethernet-phy";
|
|
|
|
};
|
|
|
|
phy1: ethernet-phy@1 {
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <19 0x8>;
|
|
|
|
reg = <0x1>;
|
2008-01-25 10:46:06 +08:00
|
|
|
device_type = "ethernet-phy";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
enet0: ethernet@24000 {
|
|
|
|
cell-index = <0>;
|
|
|
|
device_type = "network";
|
|
|
|
model = "eTSEC";
|
|
|
|
compatible = "gianfar";
|
|
|
|
reg = <0x24000 0x1000>;
|
|
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupts = <32 0x8 33 0x8 34 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-25 10:46:06 +08:00
|
|
|
phy-handle = < &phy0 >;
|
|
|
|
};
|
|
|
|
|
|
|
|
enet1: ethernet@25000 {
|
|
|
|
cell-index = <1>;
|
|
|
|
device_type = "network";
|
|
|
|
model = "eTSEC";
|
|
|
|
compatible = "gianfar";
|
|
|
|
reg = <0x25000 0x1000>;
|
|
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupts = <35 0x8 36 0x8 37 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-25 10:46:06 +08:00
|
|
|
phy-handle = < &phy1 >;
|
|
|
|
};
|
|
|
|
|
|
|
|
serial0: serial@4500 {
|
|
|
|
cell-index = <0>;
|
|
|
|
device_type = "serial";
|
|
|
|
compatible = "ns16550";
|
|
|
|
reg = <0x4500 0x100>;
|
|
|
|
clock-frequency = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupts = <9 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-25 10:46:06 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
serial1: serial@4600 {
|
|
|
|
cell-index = <1>;
|
|
|
|
device_type = "serial";
|
|
|
|
compatible = "ns16550";
|
|
|
|
reg = <0x4600 0x100>;
|
|
|
|
clock-frequency = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupts = <10 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-25 10:46:06 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
crypto@30000 {
|
|
|
|
model = "SEC3";
|
|
|
|
device_type = "crypto";
|
|
|
|
compatible = "talitos";
|
|
|
|
reg = <0x30000 0x10000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupts = <11 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-25 10:46:06 +08:00
|
|
|
/* Rev. 3.0 geometry */
|
|
|
|
num-channels = <4>;
|
|
|
|
channel-fifo-len = <24>;
|
|
|
|
exec-units-mask = <0x000001fe>;
|
|
|
|
descriptor-types-mask = <0x03ab0ebf>;
|
|
|
|
};
|
|
|
|
|
|
|
|
sata@18000 {
|
|
|
|
compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
|
|
|
|
reg = <0x18000 0x1000>;
|
|
|
|
cell-index = <1>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupts = <44 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-25 10:46:06 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
sata@19000 {
|
|
|
|
compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
|
|
|
|
reg = <0x19000 0x1000>;
|
|
|
|
cell-index = <2>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupts = <45 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-25 10:46:06 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/* IPIC
|
|
|
|
* interrupts cell = <intr #, sense>
|
|
|
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
|
|
|
* sense == 8: Level, low assertion
|
|
|
|
* sense == 2: Edge, high-to-low change
|
|
|
|
*/
|
|
|
|
ipic: interrupt-controller@700 {
|
|
|
|
interrupt-controller;
|
|
|
|
#address-cells = <0>;
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
reg = <0x700 0x100>;
|
|
|
|
device_type = "ipic";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
pci0: pci@e0008500 {
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
2008-01-25 10:46:06 +08:00
|
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x0E -mini PCI */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
0x7000 0x0 0x0 0x1 &ipic 18 0x8
|
|
|
|
0x7000 0x0 0x0 0x2 &ipic 18 0x8
|
|
|
|
0x7000 0x0 0x0 0x3 &ipic 18 0x8
|
|
|
|
0x7000 0x0 0x0 0x4 &ipic 18 0x8
|
2008-01-25 10:46:06 +08:00
|
|
|
|
|
|
|
/* IDSEL 0x0F -mini PCI */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
0x7800 0x0 0x0 0x1 &ipic 17 0x8
|
|
|
|
0x7800 0x0 0x0 0x2 &ipic 17 0x8
|
|
|
|
0x7800 0x0 0x0 0x3 &ipic 17 0x8
|
|
|
|
0x7800 0x0 0x0 0x4 &ipic 17 0x8
|
2008-01-25 10:46:06 +08:00
|
|
|
|
|
|
|
/* IDSEL 0x10 - PCI slot */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 05:09:36 +08:00
|
|
|
0x8000 0x0 0x0 0x1 &ipic 48 0x8
|
|
|
|
0x8000 0x0 0x0 0x2 &ipic 17 0x8
|
|
|
|
0x8000 0x0 0x0 0x3 &ipic 48 0x8
|
|
|
|
0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <66 0x8>;
|
|
|
|
bus-range = <0x0 0x0>;
|
2008-01-25 10:46:06 +08:00
|
|
|
ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
|
|
|
|
0x42000000 0 0x80000000 0x80000000 0 0x10000000
|
|
|
|
0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
|
|
|
|
clock-frequency = <66666666>;
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
#size-cells = <2>;
|
|
|
|
#address-cells = <3>;
|
|
|
|
reg = <0xe0008500 0x100>;
|
|
|
|
compatible = "fsl,mpc8349-pci";
|
|
|
|
device_type = "pci";
|
|
|
|
};
|
|
|
|
};
|