linux/drivers/pinctrl/aspeed/pinctrl-aspeed.c

540 lines
13 KiB
C
Raw Normal View History

/*
* Copyright (C) 2016 IBM Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/string.h>
#include "../core.h"
#include "pinctrl-aspeed.h"
static const char *const aspeed_pinmux_ips[] = {
[ASPEED_IP_SCU] = "SCU",
[ASPEED_IP_GFX] = "GFX",
[ASPEED_IP_LPC] = "LPC",
};
int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
return pdata->ngroups;
}
const char *aspeed_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
unsigned int group)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
return pdata->groups[group].name;
}
int aspeed_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
unsigned int group, const unsigned int **pins,
unsigned int *npins)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
*pins = &pdata->groups[group].pins[0];
*npins = pdata->groups[group].npins;
return 0;
}
void aspeed_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned int offset)
{
seq_printf(s, " %s", dev_name(pctldev->dev));
}
int aspeed_pinmux_get_fn_count(struct pinctrl_dev *pctldev)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
return pdata->nfunctions;
}
const char *aspeed_pinmux_get_fn_name(struct pinctrl_dev *pctldev,
unsigned int function)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
return pdata->functions[function].name;
}
int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
unsigned int function,
const char * const **groups,
unsigned int * const num_groups)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
*groups = pdata->functions[function].groups;
*num_groups = pdata->functions[function].ngroups;
return 0;
}
static inline void aspeed_sig_desc_print_val(
const struct aspeed_sig_desc *desc, bool enable, u32 rv)
{
pr_debug("Want %s%X[0x%08X]=0x%X, got 0x%X from 0x%08X\n",
aspeed_pinmux_ips[desc->ip], desc->reg,
desc->mask, enable ? desc->enable : desc->disable,
(rv & desc->mask) >> __ffs(desc->mask), rv);
}
/**
* Query the enabled or disabled state of a signal descriptor
*
* @desc: The signal descriptor of interest
* @enabled: True to query the enabled state, false to query disabled state
* @regmap: The IP block's regmap instance
*
* Return: 1 if the descriptor's bitfield is configured to the state
* selected by @enabled, 0 if not, and less than zero if an unrecoverable
* failure occurred
*
* Evaluation of descriptor state is non-trivial in that it is not a binary
* outcome: The bitfields can be greater than one bit in size and thus can take
* a value that is neither the enabled nor disabled state recorded in the
* descriptor (typically this means a different function to the one of interest
* is enabled). Thus we must explicitly test for either condition as required.
*/
static int aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
bool enabled, struct regmap *map)
{
int ret;
unsigned int raw;
u32 want;
if (!map)
return -ENODEV;
ret = regmap_read(map, desc->reg, &raw);
if (ret)
return ret;
aspeed_sig_desc_print_val(desc, enabled, raw);
want = enabled ? desc->enable : desc->disable;
return ((raw & desc->mask) >> __ffs(desc->mask)) == want;
}
/**
* Query the enabled or disabled state for a mux function's signal on a pin
*
* @expr: An expression controlling the signal for a mux function on a pin
* @enabled: True to query the enabled state, false to query disabled state
* @maps: The list of regmap instances
*
* Return: 1 if the expression composed by @enabled evaluates true, 0 if not,
* and less than zero if an unrecoverable failure occurred.
*
* A mux function is enabled or disabled if the function's signal expression
* for each pin in the function's pin group evaluates true for the desired
* state. An signal expression evaluates true if all of its associated signal
* descriptors evaluate true for the desired state.
*
* If an expression's state is described by more than one bit, either through
* multi-bit bitfields in a single signal descriptor or through multiple signal
* descriptors of a single bit then it is possible for the expression to be in
* neither the enabled nor disabled state. Thus we must explicitly test for
* either condition as required.
*/
static int aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
bool enabled, struct regmap * const *maps)
{
int i;
int ret;
for (i = 0; i < expr->ndescs; i++) {
const struct aspeed_sig_desc *desc = &expr->descs[i];
ret = aspeed_sig_desc_eval(desc, enabled, maps[desc->ip]);
if (ret <= 0)
return ret;
}
return 1;
}
/**
* Configure a pin's signal by applying an expression's descriptor state for
* all descriptors in the expression.
*
* @expr: The expression associated with the function whose signal is to be
* configured
* @enable: true to enable an function's signal through a pin's signal
* expression, false to disable the function's signal
* @maps: The list of regmap instances for pinmux register access.
*
* Return: 0 if the expression is configured as requested and a negative error
* code otherwise
*/
static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
bool enable, struct regmap * const *maps)
{
int ret;
int i;
for (i = 0; i < expr->ndescs; i++) {
const struct aspeed_sig_desc *desc = &expr->descs[i];
u32 pattern = enable ? desc->enable : desc->disable;
u32 val = (pattern << __ffs(desc->mask));
if (!maps[desc->ip])
return -ENODEV;
/*
* Strap registers are configured in hardware or by early-boot
* firmware. Treat them as read-only despite that we can write
* them. This may mean that certain functions cannot be
* deconfigured and is the reason we re-evaluate after writing
* all descriptor bits.
*/
if ((desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2) &&
desc->ip == ASPEED_IP_SCU)
continue;
ret = regmap_update_bits(maps[desc->ip], desc->reg,
desc->mask, val);
if (ret)
return ret;
}
ret = aspeed_sig_expr_eval(expr, enable, maps);
if (ret < 0)
return ret;
if (!ret)
return -EPERM;
return 0;
}
static int aspeed_sig_expr_enable(const struct aspeed_sig_expr *expr,
struct regmap * const *maps)
{
int ret;
ret = aspeed_sig_expr_eval(expr, true, maps);
if (ret < 0)
return ret;
if (!ret)
return aspeed_sig_expr_set(expr, true, maps);
pinctrl: aspeed: "Not enabled" is a significant mux state Consider a scenario with one pin P that has two signals A and B, where A is defined to be higher priority than B: That is, if the mux IP is in a state that would consider both A and B to be active on P, then A will be the active signal. To instead configure B as the active signal we must configure the mux so that A is inactive. The mux state for signals can be described by logical operations on one or more bits from one or more registers (a "signal expression"), which in some cases leads to aliased mux states for a particular signal. Further, signals described by multi-bit bitfields often do not only need to record the states that would make them active (the "enable" expressions), but also the states that makes them inactive (the "disable" expressions). All of this combined leads to four possible states for a signal: 1. A signal is active with respect to an "enable" expression 2. A signal is not active with respect to an "enable" expression 3. A signal is inactive with respect to a "disable" expression 4. A signal is not inactive with respect to a "disable" expression In the case of P, if we are looking to activate B without explicitly having configured A it's enough to consider A inactive if all of A's "enable" signal expressions evaluate to "not active". If any evaluate to "active" then the corresponding "disable" states must be applied so it becomes inactive. For example, on the AST2400 the pins composing GPIO bank H provide signals ROMD8 through ROMD15 (high priority) and those for UART6 (low priority). The mux states for ROMD8 through ROMD15 are aliased, i.e. there are two mux states that result in the respective signals being configured: A. SCU90[6]=1 B. Strap[4,1:0]=100 Further, the second mux state is a 3-bit bitfield that explicitly defines the enabled state but the disabled state is implicit, i.e. if Strap[4,1:0] is not exactly "100" then ROMD8 through ROMD15 are not considered active. This requires the mux function evaluation logic to use approach 2. above, however the existing code was using approach 3. The problem was brought to light on the Palmetto machines where the strap register value is 0x120ce416, and prevented GPIO requests in bank H from succeeding despite the hardware being in a position to allow them. Fixes: 318398c09a8d ("pinctrl: Add core pinctrl support for Aspeed SoCs") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-27 22:50:13 +08:00
return 0;
}
static int aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
struct regmap * const *maps)
{
int ret;
ret = aspeed_sig_expr_eval(expr, true, maps);
if (ret < 0)
return ret;
if (ret)
return aspeed_sig_expr_set(expr, false, maps);
pinctrl: aspeed: "Not enabled" is a significant mux state Consider a scenario with one pin P that has two signals A and B, where A is defined to be higher priority than B: That is, if the mux IP is in a state that would consider both A and B to be active on P, then A will be the active signal. To instead configure B as the active signal we must configure the mux so that A is inactive. The mux state for signals can be described by logical operations on one or more bits from one or more registers (a "signal expression"), which in some cases leads to aliased mux states for a particular signal. Further, signals described by multi-bit bitfields often do not only need to record the states that would make them active (the "enable" expressions), but also the states that makes them inactive (the "disable" expressions). All of this combined leads to four possible states for a signal: 1. A signal is active with respect to an "enable" expression 2. A signal is not active with respect to an "enable" expression 3. A signal is inactive with respect to a "disable" expression 4. A signal is not inactive with respect to a "disable" expression In the case of P, if we are looking to activate B without explicitly having configured A it's enough to consider A inactive if all of A's "enable" signal expressions evaluate to "not active". If any evaluate to "active" then the corresponding "disable" states must be applied so it becomes inactive. For example, on the AST2400 the pins composing GPIO bank H provide signals ROMD8 through ROMD15 (high priority) and those for UART6 (low priority). The mux states for ROMD8 through ROMD15 are aliased, i.e. there are two mux states that result in the respective signals being configured: A. SCU90[6]=1 B. Strap[4,1:0]=100 Further, the second mux state is a 3-bit bitfield that explicitly defines the enabled state but the disabled state is implicit, i.e. if Strap[4,1:0] is not exactly "100" then ROMD8 through ROMD15 are not considered active. This requires the mux function evaluation logic to use approach 2. above, however the existing code was using approach 3. The problem was brought to light on the Palmetto machines where the strap register value is 0x120ce416, and prevented GPIO requests in bank H from succeeding despite the hardware being in a position to allow them. Fixes: 318398c09a8d ("pinctrl: Add core pinctrl support for Aspeed SoCs") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-27 22:50:13 +08:00
return 0;
}
/**
* Disable a signal on a pin by disabling all provided signal expressions.
*
* @exprs: The list of signal expressions (from a priority level on a pin)
* @maps: The list of regmap instances for pinmux register access.
*
* Return: 0 if all expressions are disabled, otherwise a negative error code
*/
static int aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
struct regmap * const *maps)
{
int ret = 0;
if (!exprs)
return true;
while (*exprs && !ret) {
ret = aspeed_sig_expr_disable(*exprs, maps);
exprs++;
}
return ret;
}
/**
* Search for the signal expression needed to enable the pin's signal for the
* requested function.
*
* @exprs: List of signal expressions (haystack)
* @name: The name of the requested function (needle)
*
* Return: A pointer to the signal expression whose function tag matches the
* provided name, otherwise NULL.
*
*/
static const struct aspeed_sig_expr *aspeed_find_expr_by_name(
const struct aspeed_sig_expr **exprs, const char *name)
{
while (*exprs) {
if (strcmp((*exprs)->function, name) == 0)
return *exprs;
exprs++;
}
return NULL;
}
static char *get_defined_attribute(const struct aspeed_pin_desc *pdesc,
const char *(*get)(
const struct aspeed_sig_expr *))
{
char *found = NULL;
size_t len = 0;
const struct aspeed_sig_expr ***prios, **funcs, *expr;
prios = pdesc->prios;
while ((funcs = *prios)) {
while ((expr = *funcs)) {
const char *str = get(expr);
size_t delta = strlen(str) + 2;
char *expanded;
expanded = krealloc(found, len + delta + 1, GFP_KERNEL);
if (!expanded) {
kfree(found);
return expanded;
}
found = expanded;
found[len] = '\0';
len += delta;
strcat(found, str);
strcat(found, ", ");
funcs++;
}
prios++;
}
if (len < 2) {
kfree(found);
return NULL;
}
found[len - 2] = '\0';
return found;
}
static const char *aspeed_sig_expr_function(const struct aspeed_sig_expr *expr)
{
return expr->function;
}
static char *get_defined_functions(const struct aspeed_pin_desc *pdesc)
{
return get_defined_attribute(pdesc, aspeed_sig_expr_function);
}
static const char *aspeed_sig_expr_signal(const struct aspeed_sig_expr *expr)
{
return expr->signal;
}
static char *get_defined_signals(const struct aspeed_pin_desc *pdesc)
{
return get_defined_attribute(pdesc, aspeed_sig_expr_signal);
}
int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
unsigned int group)
{
int i;
int ret;
const struct aspeed_pinctrl_data *pdata =
pinctrl_dev_get_drvdata(pctldev);
const struct aspeed_pin_group *pgroup = &pdata->groups[group];
const struct aspeed_pin_function *pfunc =
&pdata->functions[function];
for (i = 0; i < pgroup->npins; i++) {
int pin = pgroup->pins[i];
const struct aspeed_pin_desc *pdesc = pdata->pins[pin].drv_data;
const struct aspeed_sig_expr *expr = NULL;
const struct aspeed_sig_expr **funcs;
const struct aspeed_sig_expr ***prios;
pr_debug("Muxing pin %d for %s\n", pin, pfunc->name);
if (!pdesc)
return -EINVAL;
prios = pdesc->prios;
if (!prios)
continue;
/* Disable functions at a higher priority than that requested */
while ((funcs = *prios)) {
expr = aspeed_find_expr_by_name(funcs, pfunc->name);
if (expr)
break;
ret = aspeed_disable_sig(funcs, pdata->maps);
if (ret)
return ret;
prios++;
}
if (!expr) {
char *functions = get_defined_functions(pdesc);
char *signals = get_defined_signals(pdesc);
pr_warn("No function %s found on pin %s (%d). Found signal(s) %s for function(s) %s\n",
pfunc->name, pdesc->name, pin, signals,
functions);
kfree(signals);
kfree(functions);
return -ENXIO;
}
ret = aspeed_sig_expr_enable(expr, pdata->maps);
if (ret)
return ret;
}
return 0;
}
static bool aspeed_expr_is_gpio(const struct aspeed_sig_expr *expr)
{
/*
* The signal type is GPIO if the signal name has "GPIO" as a prefix.
* strncmp (rather than strcmp) is used to implement the prefix
* requirement.
*
* expr->signal might look like "GPIOT3" in the GPIO case.
*/
return strncmp(expr->signal, "GPIO", 4) == 0;
}
static bool aspeed_gpio_in_exprs(const struct aspeed_sig_expr **exprs)
{
if (!exprs)
return false;
while (*exprs) {
if (aspeed_expr_is_gpio(*exprs))
return true;
exprs++;
}
return false;
}
int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
{
int ret;
const struct aspeed_pinctrl_data *pdata =
pinctrl_dev_get_drvdata(pctldev);
const struct aspeed_pin_desc *pdesc = pdata->pins[offset].drv_data;
const struct aspeed_sig_expr ***prios, **funcs, *expr;
if (!pdesc)
return -EINVAL;
prios = pdesc->prios;
if (!prios)
return -ENXIO;
/* Disable any functions of higher priority than GPIO */
while ((funcs = *prios)) {
if (aspeed_gpio_in_exprs(funcs))
break;
ret = aspeed_disable_sig(funcs, pdata->maps);
if (ret)
return ret;
prios++;
}
if (!funcs) {
char *signals = get_defined_signals(pdesc);
pr_warn("No GPIO signal type found on pin %s (%d). Found: %s\n",
pdesc->name, offset, signals);
kfree(signals);
return -ENXIO;
}
expr = *funcs;
/*
* Disabling all higher-priority expressions is enough to enable the
* lowest-priority signal type. As such it has no associated
* expression.
*/
if (!expr)
return 0;
/*
* If GPIO is not the lowest priority signal type, assume there is only
* one expression defined to enable the GPIO function
*/
return aspeed_sig_expr_enable(expr, pdata->maps);
}
int aspeed_pinctrl_probe(struct platform_device *pdev,
struct pinctrl_desc *pdesc,
struct aspeed_pinctrl_data *pdata)
{
struct device *parent;
struct pinctrl_dev *pctl;
parent = pdev->dev.parent;
if (!parent) {
dev_err(&pdev->dev, "No parent for syscon pincontroller\n");
return -ENODEV;
}
pdata->maps[ASPEED_IP_SCU] = syscon_node_to_regmap(parent->of_node);
if (IS_ERR(pdata->maps[ASPEED_IP_SCU])) {
dev_err(&pdev->dev, "No regmap for syscon pincontroller parent\n");
return PTR_ERR(pdata->maps[ASPEED_IP_SCU]);
}
pctl = pinctrl_register(pdesc, &pdev->dev, pdata);
if (IS_ERR(pctl)) {
dev_err(&pdev->dev, "Failed to register pinctrl\n");
return PTR_ERR(pctl);
}
platform_set_drvdata(pdev, pdata);
return 0;
}