License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2011-04-04 11:46:58 +08:00
|
|
|
#include <linux/types.h>
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
|
#include <linux/irq.h>
|
|
|
|
|
#include <linux/smp.h>
|
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
#include <linux/cpu.h>
|
|
|
|
|
#include <linux/of.h>
|
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
|
#include <linux/msi.h>
|
|
|
|
|
|
|
|
|
|
#include <asm/prom.h>
|
|
|
|
|
#include <asm/smp.h>
|
|
|
|
|
#include <asm/machdep.h>
|
|
|
|
|
#include <asm/irq.h>
|
|
|
|
|
#include <asm/errno.h>
|
|
|
|
|
#include <asm/xics.h>
|
|
|
|
|
#include <asm/rtas.h>
|
|
|
|
|
|
|
|
|
|
/* RTAS service tokens */
|
|
|
|
|
static int ibm_get_xive;
|
|
|
|
|
static int ibm_set_xive;
|
|
|
|
|
static int ibm_int_on;
|
|
|
|
|
static int ibm_int_off;
|
|
|
|
|
|
|
|
|
|
static int ics_rtas_map(struct ics *ics, unsigned int virq);
|
|
|
|
|
static void ics_rtas_mask_unknown(struct ics *ics, unsigned long vec);
|
|
|
|
|
static long ics_rtas_get_server(struct ics *ics, unsigned long vec);
|
2011-04-15 06:31:59 +08:00
|
|
|
static int ics_rtas_host_match(struct ics *ics, struct device_node *node);
|
2011-04-04 11:46:58 +08:00
|
|
|
|
|
|
|
|
/* Only one global & state struct ics */
|
|
|
|
|
static struct ics ics_rtas = {
|
|
|
|
|
.map = ics_rtas_map,
|
|
|
|
|
.mask_unknown = ics_rtas_mask_unknown,
|
|
|
|
|
.get_server = ics_rtas_get_server,
|
2011-04-15 06:31:59 +08:00
|
|
|
.host_match = ics_rtas_host_match,
|
2011-04-04 11:46:58 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static void ics_rtas_unmask_irq(struct irq_data *d)
|
|
|
|
|
{
|
2011-05-04 13:02:15 +08:00
|
|
|
unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
|
2011-04-04 11:46:58 +08:00
|
|
|
int call_status;
|
|
|
|
|
int server;
|
|
|
|
|
|
|
|
|
|
pr_devel("xics: unmask virq %d [hw 0x%x]\n", d->irq, hw_irq);
|
|
|
|
|
|
|
|
|
|
if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
|
|
|
|
|
return;
|
|
|
|
|
|
2015-06-01 16:05:33 +08:00
|
|
|
server = xics_get_irq_server(d->irq, irq_data_get_affinity_mask(d), 0);
|
2011-04-04 11:46:58 +08:00
|
|
|
|
powerpc/rtas: Implement reentrant rtas call
Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".
On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:
2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.
So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.
For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.
Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.
This is a backtrace of a deadlock from a kdump testing environment:
#0 arch_spin_lock
#1 lock_rtas ()
#2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3 ics_rtas_mask_real_irq (hw_irq=4100)
#4 machine_kexec_mask_interrupts
#5 default_machine_crash_shutdown
#6 machine_crash_shutdown
#7 __crash_kexec
#8 crash_kexec
#9 oops_end
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com
2020-05-19 07:42:45 +08:00
|
|
|
call_status = rtas_call_reentrant(ibm_set_xive, 3, 1, NULL, hw_irq,
|
|
|
|
|
server, DEFAULT_PRIORITY);
|
2011-04-04 11:46:58 +08:00
|
|
|
if (call_status != 0) {
|
|
|
|
|
printk(KERN_ERR
|
|
|
|
|
"%s: ibm_set_xive irq %u server %x returned %d\n",
|
|
|
|
|
__func__, hw_irq, server, call_status);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Now unmask the interrupt (often a no-op) */
|
powerpc/rtas: Implement reentrant rtas call
Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".
On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:
2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.
So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.
For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.
Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.
This is a backtrace of a deadlock from a kdump testing environment:
#0 arch_spin_lock
#1 lock_rtas ()
#2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3 ics_rtas_mask_real_irq (hw_irq=4100)
#4 machine_kexec_mask_interrupts
#5 default_machine_crash_shutdown
#6 machine_crash_shutdown
#7 __crash_kexec
#8 crash_kexec
#9 oops_end
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com
2020-05-19 07:42:45 +08:00
|
|
|
call_status = rtas_call_reentrant(ibm_int_on, 1, 1, NULL, hw_irq);
|
2011-04-04 11:46:58 +08:00
|
|
|
if (call_status != 0) {
|
|
|
|
|
printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
|
|
|
|
|
__func__, hw_irq, call_status);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static unsigned int ics_rtas_startup(struct irq_data *d)
|
|
|
|
|
{
|
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
|
|
|
/*
|
|
|
|
|
* The generic MSI code returns with the interrupt disabled on the
|
|
|
|
|
* card, using the MSI mask bits. Firmware doesn't appear to unmask
|
|
|
|
|
* at that level, so we do it here by hand.
|
|
|
|
|
*/
|
2015-06-01 16:05:42 +08:00
|
|
|
if (irq_data_get_msi_desc(d))
|
2014-11-23 19:23:20 +08:00
|
|
|
pci_msi_unmask_irq(d);
|
2011-04-04 11:46:58 +08:00
|
|
|
#endif
|
|
|
|
|
/* unmask it */
|
|
|
|
|
ics_rtas_unmask_irq(d);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ics_rtas_mask_real_irq(unsigned int hw_irq)
|
|
|
|
|
{
|
|
|
|
|
int call_status;
|
|
|
|
|
|
|
|
|
|
if (hw_irq == XICS_IPI)
|
|
|
|
|
return;
|
|
|
|
|
|
powerpc/rtas: Implement reentrant rtas call
Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".
On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:
2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.
So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.
For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.
Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.
This is a backtrace of a deadlock from a kdump testing environment:
#0 arch_spin_lock
#1 lock_rtas ()
#2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3 ics_rtas_mask_real_irq (hw_irq=4100)
#4 machine_kexec_mask_interrupts
#5 default_machine_crash_shutdown
#6 machine_crash_shutdown
#7 __crash_kexec
#8 crash_kexec
#9 oops_end
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com
2020-05-19 07:42:45 +08:00
|
|
|
call_status = rtas_call_reentrant(ibm_int_off, 1, 1, NULL, hw_irq);
|
2011-04-04 11:46:58 +08:00
|
|
|
if (call_status != 0) {
|
|
|
|
|
printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
|
|
|
|
|
__func__, hw_irq, call_status);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Have to set XIVE to 0xff to be able to remove a slot */
|
powerpc/rtas: Implement reentrant rtas call
Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".
On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:
2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.
So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.
For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.
Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.
This is a backtrace of a deadlock from a kdump testing environment:
#0 arch_spin_lock
#1 lock_rtas ()
#2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3 ics_rtas_mask_real_irq (hw_irq=4100)
#4 machine_kexec_mask_interrupts
#5 default_machine_crash_shutdown
#6 machine_crash_shutdown
#7 __crash_kexec
#8 crash_kexec
#9 oops_end
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com
2020-05-19 07:42:45 +08:00
|
|
|
call_status = rtas_call_reentrant(ibm_set_xive, 3, 1, NULL, hw_irq,
|
|
|
|
|
xics_default_server, 0xff);
|
2011-04-04 11:46:58 +08:00
|
|
|
if (call_status != 0) {
|
|
|
|
|
printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
|
|
|
|
|
__func__, hw_irq, call_status);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ics_rtas_mask_irq(struct irq_data *d)
|
|
|
|
|
{
|
2011-05-04 13:02:15 +08:00
|
|
|
unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
|
2011-04-04 11:46:58 +08:00
|
|
|
|
|
|
|
|
pr_devel("xics: mask virq %d [hw 0x%x]\n", d->irq, hw_irq);
|
|
|
|
|
|
|
|
|
|
if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
|
|
|
|
|
return;
|
|
|
|
|
ics_rtas_mask_real_irq(hw_irq);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ics_rtas_set_affinity(struct irq_data *d,
|
|
|
|
|
const struct cpumask *cpumask,
|
|
|
|
|
bool force)
|
|
|
|
|
{
|
2011-05-04 13:02:15 +08:00
|
|
|
unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
|
2011-04-04 11:46:58 +08:00
|
|
|
int status;
|
|
|
|
|
int xics_status[2];
|
|
|
|
|
int irq_server;
|
|
|
|
|
|
|
|
|
|
if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
|
|
|
|
|
return -1;
|
|
|
|
|
|
powerpc/rtas: Implement reentrant rtas call
Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".
On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:
2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.
So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.
For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.
Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.
This is a backtrace of a deadlock from a kdump testing environment:
#0 arch_spin_lock
#1 lock_rtas ()
#2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3 ics_rtas_mask_real_irq (hw_irq=4100)
#4 machine_kexec_mask_interrupts
#5 default_machine_crash_shutdown
#6 machine_crash_shutdown
#7 __crash_kexec
#8 crash_kexec
#9 oops_end
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com
2020-05-19 07:42:45 +08:00
|
|
|
status = rtas_call_reentrant(ibm_get_xive, 1, 3, xics_status, hw_irq);
|
2011-04-04 11:46:58 +08:00
|
|
|
|
|
|
|
|
if (status) {
|
|
|
|
|
printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
|
|
|
|
|
__func__, hw_irq, status);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
irq_server = xics_get_irq_server(d->irq, cpumask, 1);
|
|
|
|
|
if (irq_server == -1) {
|
2016-10-25 12:00:08 +08:00
|
|
|
pr_warn("%s: No online cpus in the mask %*pb for irq %d\n",
|
|
|
|
|
__func__, cpumask_pr_args(cpumask), d->irq);
|
2011-04-04 11:46:58 +08:00
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
powerpc/rtas: Implement reentrant rtas call
Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".
On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:
2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.
So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.
For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.
Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.
This is a backtrace of a deadlock from a kdump testing environment:
#0 arch_spin_lock
#1 lock_rtas ()
#2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3 ics_rtas_mask_real_irq (hw_irq=4100)
#4 machine_kexec_mask_interrupts
#5 default_machine_crash_shutdown
#6 machine_crash_shutdown
#7 __crash_kexec
#8 crash_kexec
#9 oops_end
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com
2020-05-19 07:42:45 +08:00
|
|
|
status = rtas_call_reentrant(ibm_set_xive, 3, 1, NULL,
|
|
|
|
|
hw_irq, irq_server, xics_status[1]);
|
2011-04-04 11:46:58 +08:00
|
|
|
|
|
|
|
|
if (status) {
|
|
|
|
|
printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
|
|
|
|
|
__func__, hw_irq, status);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return IRQ_SET_MASK_OK;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct irq_chip ics_rtas_irq_chip = {
|
|
|
|
|
.name = "XICS",
|
|
|
|
|
.irq_startup = ics_rtas_startup,
|
|
|
|
|
.irq_mask = ics_rtas_mask_irq,
|
|
|
|
|
.irq_unmask = ics_rtas_unmask_irq,
|
|
|
|
|
.irq_eoi = NULL, /* Patched at init time */
|
2016-08-02 10:39:43 +08:00
|
|
|
.irq_set_affinity = ics_rtas_set_affinity,
|
|
|
|
|
.irq_set_type = xics_set_irq_type,
|
|
|
|
|
.irq_retrigger = xics_retrigger,
|
2011-04-04 11:46:58 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int ics_rtas_map(struct ics *ics, unsigned int virq)
|
|
|
|
|
{
|
2011-05-04 13:02:15 +08:00
|
|
|
unsigned int hw_irq = (unsigned int)virq_to_hw(virq);
|
2011-04-04 11:46:58 +08:00
|
|
|
int status[2];
|
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
|
|
if (WARN_ON(hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS))
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
/* Check if RTAS knows about this interrupt */
|
powerpc/rtas: Implement reentrant rtas call
Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".
On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:
2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.
So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.
For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.
Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.
This is a backtrace of a deadlock from a kdump testing environment:
#0 arch_spin_lock
#1 lock_rtas ()
#2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3 ics_rtas_mask_real_irq (hw_irq=4100)
#4 machine_kexec_mask_interrupts
#5 default_machine_crash_shutdown
#6 machine_crash_shutdown
#7 __crash_kexec
#8 crash_kexec
#9 oops_end
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com
2020-05-19 07:42:45 +08:00
|
|
|
rc = rtas_call_reentrant(ibm_get_xive, 1, 3, status, hw_irq);
|
2011-04-04 11:46:58 +08:00
|
|
|
if (rc)
|
|
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
|
|
irq_set_chip_and_handler(virq, &ics_rtas_irq_chip, handle_fasteoi_irq);
|
|
|
|
|
irq_set_chip_data(virq, &ics_rtas);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ics_rtas_mask_unknown(struct ics *ics, unsigned long vec)
|
|
|
|
|
{
|
|
|
|
|
ics_rtas_mask_real_irq(vec);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static long ics_rtas_get_server(struct ics *ics, unsigned long vec)
|
|
|
|
|
{
|
|
|
|
|
int rc, status[2];
|
|
|
|
|
|
powerpc/rtas: Implement reentrant rtas call
Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".
On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:
2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.
So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.
For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.
Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.
This is a backtrace of a deadlock from a kdump testing environment:
#0 arch_spin_lock
#1 lock_rtas ()
#2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3 ics_rtas_mask_real_irq (hw_irq=4100)
#4 machine_kexec_mask_interrupts
#5 default_machine_crash_shutdown
#6 machine_crash_shutdown
#7 __crash_kexec
#8 crash_kexec
#9 oops_end
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com
2020-05-19 07:42:45 +08:00
|
|
|
rc = rtas_call_reentrant(ibm_get_xive, 1, 3, status, vec);
|
2011-04-04 11:46:58 +08:00
|
|
|
if (rc)
|
|
|
|
|
return -1;
|
|
|
|
|
return status[0];
|
|
|
|
|
}
|
|
|
|
|
|
2011-04-15 06:31:59 +08:00
|
|
|
static int ics_rtas_host_match(struct ics *ics, struct device_node *node)
|
|
|
|
|
{
|
|
|
|
|
/* IBM machines have interrupt parents of various funky types for things
|
|
|
|
|
* like vdevices, events, etc... The trick we use here is to match
|
|
|
|
|
* everything here except the legacy 8259 which is compatible "chrp,iic"
|
|
|
|
|
*/
|
|
|
|
|
return !of_device_is_compatible(node, "chrp,iic");
|
|
|
|
|
}
|
|
|
|
|
|
2013-02-05 13:07:06 +08:00
|
|
|
__init int ics_rtas_init(void)
|
2011-04-04 11:46:58 +08:00
|
|
|
{
|
|
|
|
|
ibm_get_xive = rtas_token("ibm,get-xive");
|
|
|
|
|
ibm_set_xive = rtas_token("ibm,set-xive");
|
|
|
|
|
ibm_int_on = rtas_token("ibm,int-on");
|
|
|
|
|
ibm_int_off = rtas_token("ibm,int-off");
|
|
|
|
|
|
|
|
|
|
/* We enable the RTAS "ICS" if RTAS is present with the
|
|
|
|
|
* appropriate tokens
|
|
|
|
|
*/
|
|
|
|
|
if (ibm_get_xive == RTAS_UNKNOWN_SERVICE ||
|
|
|
|
|
ibm_set_xive == RTAS_UNKNOWN_SERVICE)
|
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
|
|
/* We need to patch our irq chip's EOI to point to the
|
|
|
|
|
* right ICP
|
|
|
|
|
*/
|
|
|
|
|
ics_rtas_irq_chip.irq_eoi = icp_ops->eoi;
|
|
|
|
|
|
|
|
|
|
/* Register ourselves */
|
|
|
|
|
xics_register_ics(&ics_rtas);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|