linux/drivers/media/i2c/mt9t001.c

978 lines
26 KiB
C
Raw Normal View History

/*
* Driver for MT9T001 CMOS Image Sensor from Aptina (Micron)
*
* Copyright (C) 2010-2011, Laurent Pinchart <laurent.pinchart@ideasonboard.com>
*
* Based on the MT9M001 driver,
*
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/v4l2-mediabus.h>
[media] include/media: split I2C headers from V4L2 core Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-11-10 22:01:44 +08:00
#include <media/i2c/mt9t001.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-subdev.h>
#define MT9T001_PIXEL_ARRAY_HEIGHT 1568
#define MT9T001_PIXEL_ARRAY_WIDTH 2112
#define MT9T001_CHIP_VERSION 0x00
#define MT9T001_CHIP_ID 0x1621
#define MT9T001_ROW_START 0x01
#define MT9T001_ROW_START_MIN 0
#define MT9T001_ROW_START_DEF 20
#define MT9T001_ROW_START_MAX 1534
#define MT9T001_COLUMN_START 0x02
#define MT9T001_COLUMN_START_MIN 0
#define MT9T001_COLUMN_START_DEF 32
#define MT9T001_COLUMN_START_MAX 2046
#define MT9T001_WINDOW_HEIGHT 0x03
#define MT9T001_WINDOW_HEIGHT_MIN 1
#define MT9T001_WINDOW_HEIGHT_DEF 1535
#define MT9T001_WINDOW_HEIGHT_MAX 1567
#define MT9T001_WINDOW_WIDTH 0x04
#define MT9T001_WINDOW_WIDTH_MIN 1
#define MT9T001_WINDOW_WIDTH_DEF 2047
#define MT9T001_WINDOW_WIDTH_MAX 2111
#define MT9T001_HORIZONTAL_BLANKING 0x05
#define MT9T001_HORIZONTAL_BLANKING_MIN 21
#define MT9T001_HORIZONTAL_BLANKING_MAX 1023
#define MT9T001_VERTICAL_BLANKING 0x06
#define MT9T001_VERTICAL_BLANKING_MIN 3
#define MT9T001_VERTICAL_BLANKING_MAX 1023
#define MT9T001_OUTPUT_CONTROL 0x07
#define MT9T001_OUTPUT_CONTROL_SYNC (1 << 0)
#define MT9T001_OUTPUT_CONTROL_CHIP_ENABLE (1 << 1)
#define MT9T001_OUTPUT_CONTROL_TEST_DATA (1 << 6)
#define MT9T001_OUTPUT_CONTROL_DEF 0x0002
#define MT9T001_SHUTTER_WIDTH_HIGH 0x08
#define MT9T001_SHUTTER_WIDTH_LOW 0x09
#define MT9T001_SHUTTER_WIDTH_MIN 1
#define MT9T001_SHUTTER_WIDTH_DEF 1561
#define MT9T001_SHUTTER_WIDTH_MAX (1024 * 1024)
#define MT9T001_PIXEL_CLOCK 0x0a
#define MT9T001_PIXEL_CLOCK_INVERT (1 << 15)
#define MT9T001_PIXEL_CLOCK_SHIFT_MASK (7 << 8)
#define MT9T001_PIXEL_CLOCK_SHIFT_SHIFT 8
#define MT9T001_PIXEL_CLOCK_DIVIDE_MASK (0x7f << 0)
#define MT9T001_FRAME_RESTART 0x0b
#define MT9T001_SHUTTER_DELAY 0x0c
#define MT9T001_SHUTTER_DELAY_MAX 2047
#define MT9T001_RESET 0x0d
#define MT9T001_READ_MODE1 0x1e
#define MT9T001_READ_MODE_SNAPSHOT (1 << 8)
#define MT9T001_READ_MODE_STROBE_ENABLE (1 << 9)
#define MT9T001_READ_MODE_STROBE_WIDTH (1 << 10)
#define MT9T001_READ_MODE_STROBE_OVERRIDE (1 << 11)
#define MT9T001_READ_MODE2 0x20
#define MT9T001_READ_MODE_BAD_FRAMES (1 << 0)
#define MT9T001_READ_MODE_LINE_VALID_CONTINUOUS (1 << 9)
#define MT9T001_READ_MODE_LINE_VALID_FRAME (1 << 10)
#define MT9T001_READ_MODE3 0x21
#define MT9T001_READ_MODE_GLOBAL_RESET (1 << 0)
#define MT9T001_READ_MODE_GHST_CTL (1 << 1)
#define MT9T001_ROW_ADDRESS_MODE 0x22
#define MT9T001_ROW_SKIP_MASK (7 << 0)
#define MT9T001_ROW_BIN_MASK (3 << 3)
#define MT9T001_ROW_BIN_SHIFT 3
#define MT9T001_COLUMN_ADDRESS_MODE 0x23
#define MT9T001_COLUMN_SKIP_MASK (7 << 0)
#define MT9T001_COLUMN_BIN_MASK (3 << 3)
#define MT9T001_COLUMN_BIN_SHIFT 3
#define MT9T001_GREEN1_GAIN 0x2b
#define MT9T001_BLUE_GAIN 0x2c
#define MT9T001_RED_GAIN 0x2d
#define MT9T001_GREEN2_GAIN 0x2e
#define MT9T001_TEST_DATA 0x32
#define MT9T001_GLOBAL_GAIN 0x35
#define MT9T001_GLOBAL_GAIN_MIN 8
#define MT9T001_GLOBAL_GAIN_MAX 1024
#define MT9T001_BLACK_LEVEL 0x49
#define MT9T001_ROW_BLACK_DEFAULT_OFFSET 0x4b
#define MT9T001_BLC_DELTA_THRESHOLDS 0x5d
#define MT9T001_CAL_THRESHOLDS 0x5f
#define MT9T001_GREEN1_OFFSET 0x60
#define MT9T001_GREEN2_OFFSET 0x61
#define MT9T001_BLACK_LEVEL_CALIBRATION 0x62
#define MT9T001_BLACK_LEVEL_OVERRIDE (1 << 0)
#define MT9T001_BLACK_LEVEL_DISABLE_OFFSET (1 << 1)
#define MT9T001_BLACK_LEVEL_RECALCULATE (1 << 12)
#define MT9T001_BLACK_LEVEL_LOCK_RED_BLUE (1 << 13)
#define MT9T001_BLACK_LEVEL_LOCK_GREEN (1 << 14)
#define MT9T001_RED_OFFSET 0x63
#define MT9T001_BLUE_OFFSET 0x64
struct mt9t001 {
struct v4l2_subdev subdev;
struct media_pad pad;
struct clk *clk;
struct regulator_bulk_data regulators[2];
struct mutex power_lock; /* lock to protect power_count */
int power_count;
struct v4l2_mbus_framefmt format;
struct v4l2_rect crop;
struct v4l2_ctrl_handler ctrls;
struct v4l2_ctrl *gains[4];
u16 output_control;
u16 black_level;
};
static inline struct mt9t001 *to_mt9t001(struct v4l2_subdev *sd)
{
return container_of(sd, struct mt9t001, subdev);
}
static int mt9t001_read(struct i2c_client *client, u8 reg)
{
return i2c_smbus_read_word_swapped(client, reg);
}
static int mt9t001_write(struct i2c_client *client, u8 reg, u16 data)
{
return i2c_smbus_write_word_swapped(client, reg, data);
}
static int mt9t001_set_output_control(struct mt9t001 *mt9t001, u16 clear,
u16 set)
{
struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev);
u16 value = (mt9t001->output_control & ~clear) | set;
int ret;
if (value == mt9t001->output_control)
return 0;
ret = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, value);
if (ret < 0)
return ret;
mt9t001->output_control = value;
return 0;
}
static int mt9t001_reset(struct mt9t001 *mt9t001)
{
struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev);
int ret;
/* Reset the chip and stop data read out */
ret = mt9t001_write(client, MT9T001_RESET, 1);
if (ret < 0)
return ret;
ret = mt9t001_write(client, MT9T001_RESET, 0);
if (ret < 0)
return ret;
mt9t001->output_control = MT9T001_OUTPUT_CONTROL_DEF;
return mt9t001_set_output_control(mt9t001,
MT9T001_OUTPUT_CONTROL_CHIP_ENABLE,
0);
}
static int mt9t001_power_on(struct mt9t001 *mt9t001)
{
int ret;
/* Bring up the supplies */
ret = regulator_bulk_enable(ARRAY_SIZE(mt9t001->regulators),
mt9t001->regulators);
if (ret < 0)
return ret;
/* Enable clock */
ret = clk_prepare_enable(mt9t001->clk);
if (ret < 0)
regulator_bulk_disable(ARRAY_SIZE(mt9t001->regulators),
mt9t001->regulators);
return ret;
}
static void mt9t001_power_off(struct mt9t001 *mt9t001)
{
regulator_bulk_disable(ARRAY_SIZE(mt9t001->regulators),
mt9t001->regulators);
clk_disable_unprepare(mt9t001->clk);
}
static int __mt9t001_set_power(struct mt9t001 *mt9t001, bool on)
{
struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev);
int ret;
if (!on) {
mt9t001_power_off(mt9t001);
return 0;
}
ret = mt9t001_power_on(mt9t001);
if (ret < 0)
return ret;
ret = mt9t001_reset(mt9t001);
if (ret < 0) {
dev_err(&client->dev, "Failed to reset the camera\n");
return ret;
}
return v4l2_ctrl_handler_setup(&mt9t001->ctrls);
}
/* -----------------------------------------------------------------------------
* V4L2 subdev video operations
*/
static struct v4l2_mbus_framefmt *
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
__mt9t001_get_pad_format(struct mt9t001 *mt9t001, struct v4l2_subdev_pad_config *cfg,
unsigned int pad, enum v4l2_subdev_format_whence which)
{
switch (which) {
case V4L2_SUBDEV_FORMAT_TRY:
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
return v4l2_subdev_get_try_format(&mt9t001->subdev, cfg, pad);
case V4L2_SUBDEV_FORMAT_ACTIVE:
return &mt9t001->format;
default:
return NULL;
}
}
static struct v4l2_rect *
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
__mt9t001_get_pad_crop(struct mt9t001 *mt9t001, struct v4l2_subdev_pad_config *cfg,
unsigned int pad, enum v4l2_subdev_format_whence which)
{
switch (which) {
case V4L2_SUBDEV_FORMAT_TRY:
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
return v4l2_subdev_get_try_crop(&mt9t001->subdev, cfg, pad);
case V4L2_SUBDEV_FORMAT_ACTIVE:
return &mt9t001->crop;
default:
return NULL;
}
}
static int mt9t001_s_stream(struct v4l2_subdev *subdev, int enable)
{
const u16 mode = MT9T001_OUTPUT_CONTROL_CHIP_ENABLE;
struct i2c_client *client = v4l2_get_subdevdata(subdev);
struct mt9t001_platform_data *pdata = client->dev.platform_data;
struct mt9t001 *mt9t001 = to_mt9t001(subdev);
struct v4l2_mbus_framefmt *format = &mt9t001->format;
struct v4l2_rect *crop = &mt9t001->crop;
unsigned int hratio;
unsigned int vratio;
int ret;
if (!enable)
return mt9t001_set_output_control(mt9t001, mode, 0);
/* Configure the pixel clock polarity */
if (pdata->clk_pol) {
ret = mt9t001_write(client, MT9T001_PIXEL_CLOCK,
MT9T001_PIXEL_CLOCK_INVERT);
if (ret < 0)
return ret;
}
/* Configure the window size and row/column bin */
hratio = DIV_ROUND_CLOSEST(crop->width, format->width);
vratio = DIV_ROUND_CLOSEST(crop->height, format->height);
ret = mt9t001_write(client, MT9T001_ROW_ADDRESS_MODE, hratio - 1);
if (ret < 0)
return ret;
ret = mt9t001_write(client, MT9T001_COLUMN_ADDRESS_MODE, vratio - 1);
if (ret < 0)
return ret;
ret = mt9t001_write(client, MT9T001_COLUMN_START, crop->left);
if (ret < 0)
return ret;
ret = mt9t001_write(client, MT9T001_ROW_START, crop->top);
if (ret < 0)
return ret;
ret = mt9t001_write(client, MT9T001_WINDOW_WIDTH, crop->width - 1);
if (ret < 0)
return ret;
ret = mt9t001_write(client, MT9T001_WINDOW_HEIGHT, crop->height - 1);
if (ret < 0)
return ret;
/* Switch to master "normal" mode */
return mt9t001_set_output_control(mt9t001, 0, mode);
}
static int mt9t001_enum_mbus_code(struct v4l2_subdev *subdev,
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->index > 0)
return -EINVAL;
code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
return 0;
}
static int mt9t001_enum_frame_size(struct v4l2_subdev *subdev,
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_frame_size_enum *fse)
{
if (fse->index >= 8 || fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
return -EINVAL;
fse->min_width = (MT9T001_WINDOW_WIDTH_DEF + 1) / fse->index;
fse->max_width = fse->min_width;
fse->min_height = (MT9T001_WINDOW_HEIGHT_DEF + 1) / fse->index;
fse->max_height = fse->min_height;
return 0;
}
static int mt9t001_get_format(struct v4l2_subdev *subdev,
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
{
struct mt9t001 *mt9t001 = to_mt9t001(subdev);
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
format->format = *__mt9t001_get_pad_format(mt9t001, cfg, format->pad,
format->which);
return 0;
}
static int mt9t001_set_format(struct v4l2_subdev *subdev,
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
{
struct mt9t001 *mt9t001 = to_mt9t001(subdev);
struct v4l2_mbus_framefmt *__format;
struct v4l2_rect *__crop;
unsigned int width;
unsigned int height;
unsigned int hratio;
unsigned int vratio;
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
__crop = __mt9t001_get_pad_crop(mt9t001, cfg, format->pad,
format->which);
/* Clamp the width and height to avoid dividing by zero. */
width = clamp_t(unsigned int, ALIGN(format->format.width, 2),
max_t(unsigned int, __crop->width / 8,
MT9T001_WINDOW_HEIGHT_MIN + 1),
__crop->width);
height = clamp_t(unsigned int, ALIGN(format->format.height, 2),
max_t(unsigned int, __crop->height / 8,
MT9T001_WINDOW_HEIGHT_MIN + 1),
__crop->height);
hratio = DIV_ROUND_CLOSEST(__crop->width, width);
vratio = DIV_ROUND_CLOSEST(__crop->height, height);
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
__format = __mt9t001_get_pad_format(mt9t001, cfg, format->pad,
format->which);
__format->width = __crop->width / hratio;
__format->height = __crop->height / vratio;
format->format = *__format;
return 0;
}
static int mt9t001_get_selection(struct v4l2_subdev *subdev,
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{
struct mt9t001 *mt9t001 = to_mt9t001(subdev);
if (sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
sel->r = *__mt9t001_get_pad_crop(mt9t001, cfg, sel->pad, sel->which);
return 0;
}
static int mt9t001_set_selection(struct v4l2_subdev *subdev,
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{
struct mt9t001 *mt9t001 = to_mt9t001(subdev);
struct v4l2_mbus_framefmt *__format;
struct v4l2_rect *__crop;
struct v4l2_rect rect;
if (sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
/* Clamp the crop rectangle boundaries and align them to a multiple of 2
* pixels.
*/
rect.left = clamp(ALIGN(sel->r.left, 2),
MT9T001_COLUMN_START_MIN,
MT9T001_COLUMN_START_MAX);
rect.top = clamp(ALIGN(sel->r.top, 2),
MT9T001_ROW_START_MIN,
MT9T001_ROW_START_MAX);
rect.width = clamp_t(unsigned int, ALIGN(sel->r.width, 2),
MT9T001_WINDOW_WIDTH_MIN + 1,
MT9T001_WINDOW_WIDTH_MAX + 1);
rect.height = clamp_t(unsigned int, ALIGN(sel->r.height, 2),
MT9T001_WINDOW_HEIGHT_MIN + 1,
MT9T001_WINDOW_HEIGHT_MAX + 1);
rect.width = min_t(unsigned int, rect.width,
MT9T001_PIXEL_ARRAY_WIDTH - rect.left);
rect.height = min_t(unsigned int, rect.height,
MT9T001_PIXEL_ARRAY_HEIGHT - rect.top);
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
__crop = __mt9t001_get_pad_crop(mt9t001, cfg, sel->pad, sel->which);
if (rect.width != __crop->width || rect.height != __crop->height) {
/* Reset the output image size if the crop rectangle size has
* been modified.
*/
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
__format = __mt9t001_get_pad_format(mt9t001, cfg, sel->pad,
sel->which);
__format->width = rect.width;
__format->height = rect.height;
}
*__crop = rect;
sel->r = rect;
return 0;
}
/* -----------------------------------------------------------------------------
* V4L2 subdev control operations
*/
#define V4L2_CID_TEST_PATTERN_COLOR (V4L2_CID_USER_BASE | 0x1001)
#define V4L2_CID_BLACK_LEVEL_AUTO (V4L2_CID_USER_BASE | 0x1002)
#define V4L2_CID_BLACK_LEVEL_OFFSET (V4L2_CID_USER_BASE | 0x1003)
#define V4L2_CID_BLACK_LEVEL_CALIBRATE (V4L2_CID_USER_BASE | 0x1004)
#define V4L2_CID_GAIN_RED (V4L2_CTRL_CLASS_CAMERA | 0x1001)
#define V4L2_CID_GAIN_GREEN_RED (V4L2_CTRL_CLASS_CAMERA | 0x1002)
#define V4L2_CID_GAIN_GREEN_BLUE (V4L2_CTRL_CLASS_CAMERA | 0x1003)
#define V4L2_CID_GAIN_BLUE (V4L2_CTRL_CLASS_CAMERA | 0x1004)
static u16 mt9t001_gain_value(s32 *gain)
{
/* Gain is controlled by 2 analog stages and a digital stage. Valid
* values for the 3 stages are
*
* Stage Min Max Step
* ------------------------------------------
* First analog stage x1 x2 1
* Second analog stage x1 x4 0.125
* Digital stage x1 x16 0.125
*
* To minimize noise, the gain stages should be used in the second
* analog stage, first analog stage, digital stage order. Gain from a
* previous stage should be pushed to its maximum value before the next
* stage is used.
*/
if (*gain <= 32)
return *gain;
if (*gain <= 64) {
*gain &= ~1;
return (1 << 6) | (*gain >> 1);
}
*gain &= ~7;
return ((*gain - 64) << 5) | (1 << 6) | 32;
}
static int mt9t001_ctrl_freeze(struct mt9t001 *mt9t001, bool freeze)
{
return mt9t001_set_output_control(mt9t001,
freeze ? 0 : MT9T001_OUTPUT_CONTROL_SYNC,
freeze ? MT9T001_OUTPUT_CONTROL_SYNC : 0);
}
static int mt9t001_s_ctrl(struct v4l2_ctrl *ctrl)
{
static const u8 gains[4] = {
MT9T001_RED_GAIN, MT9T001_GREEN1_GAIN,
MT9T001_GREEN2_GAIN, MT9T001_BLUE_GAIN
};
struct mt9t001 *mt9t001 =
container_of(ctrl->handler, struct mt9t001, ctrls);
struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev);
unsigned int count;
unsigned int i;
u16 value;
int ret;
switch (ctrl->id) {
case V4L2_CID_GAIN_RED:
case V4L2_CID_GAIN_GREEN_RED:
case V4L2_CID_GAIN_GREEN_BLUE:
case V4L2_CID_GAIN_BLUE:
/* Disable control updates if more than one control has changed
* in the cluster.
*/
for (i = 0, count = 0; i < 4; ++i) {
struct v4l2_ctrl *gain = mt9t001->gains[i];
if (gain->val != gain->cur.val)
count++;
}
if (count > 1) {
ret = mt9t001_ctrl_freeze(mt9t001, true);
if (ret < 0)
return ret;
}
/* Update the gain controls. */
for (i = 0; i < 4; ++i) {
struct v4l2_ctrl *gain = mt9t001->gains[i];
if (gain->val == gain->cur.val)
continue;
value = mt9t001_gain_value(&gain->val);
ret = mt9t001_write(client, gains[i], value);
if (ret < 0) {
mt9t001_ctrl_freeze(mt9t001, false);
return ret;
}
}
/* Enable control updates. */
if (count > 1) {
ret = mt9t001_ctrl_freeze(mt9t001, false);
if (ret < 0)
return ret;
}
break;
case V4L2_CID_EXPOSURE:
ret = mt9t001_write(client, MT9T001_SHUTTER_WIDTH_LOW,
ctrl->val & 0xffff);
if (ret < 0)
return ret;
return mt9t001_write(client, MT9T001_SHUTTER_WIDTH_HIGH,
ctrl->val >> 16);
case V4L2_CID_TEST_PATTERN:
return mt9t001_set_output_control(mt9t001,
ctrl->val ? 0 : MT9T001_OUTPUT_CONTROL_TEST_DATA,
ctrl->val ? MT9T001_OUTPUT_CONTROL_TEST_DATA : 0);
case V4L2_CID_TEST_PATTERN_COLOR:
return mt9t001_write(client, MT9T001_TEST_DATA, ctrl->val << 2);
case V4L2_CID_BLACK_LEVEL_AUTO:
value = ctrl->val ? 0 : MT9T001_BLACK_LEVEL_OVERRIDE;
ret = mt9t001_write(client, MT9T001_BLACK_LEVEL_CALIBRATION,
value);
if (ret < 0)
return ret;
mt9t001->black_level = value;
break;
case V4L2_CID_BLACK_LEVEL_OFFSET:
ret = mt9t001_write(client, MT9T001_GREEN1_OFFSET, ctrl->val);
if (ret < 0)
return ret;
ret = mt9t001_write(client, MT9T001_GREEN2_OFFSET, ctrl->val);
if (ret < 0)
return ret;
ret = mt9t001_write(client, MT9T001_RED_OFFSET, ctrl->val);
if (ret < 0)
return ret;
return mt9t001_write(client, MT9T001_BLUE_OFFSET, ctrl->val);
case V4L2_CID_BLACK_LEVEL_CALIBRATE:
return mt9t001_write(client, MT9T001_BLACK_LEVEL_CALIBRATION,
MT9T001_BLACK_LEVEL_RECALCULATE |
mt9t001->black_level);
}
return 0;
}
static const struct v4l2_ctrl_ops mt9t001_ctrl_ops = {
.s_ctrl = mt9t001_s_ctrl,
};
static const char * const mt9t001_test_pattern_menu[] = {
"Disabled",
"Enabled",
};
static const struct v4l2_ctrl_config mt9t001_ctrls[] = {
{
.ops = &mt9t001_ctrl_ops,
.id = V4L2_CID_TEST_PATTERN_COLOR,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Test Pattern Color",
.min = 0,
.max = 1023,
.step = 1,
.def = 0,
.flags = 0,
}, {
.ops = &mt9t001_ctrl_ops,
.id = V4L2_CID_BLACK_LEVEL_AUTO,
.type = V4L2_CTRL_TYPE_BOOLEAN,
.name = "Black Level, Auto",
.min = 0,
.max = 1,
.step = 1,
.def = 1,
.flags = 0,
}, {
.ops = &mt9t001_ctrl_ops,
.id = V4L2_CID_BLACK_LEVEL_OFFSET,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Black Level, Offset",
.min = -256,
.max = 255,
.step = 1,
.def = 32,
.flags = 0,
}, {
.ops = &mt9t001_ctrl_ops,
.id = V4L2_CID_BLACK_LEVEL_CALIBRATE,
.type = V4L2_CTRL_TYPE_BUTTON,
.name = "Black Level, Calibrate",
.min = 0,
.max = 0,
.step = 0,
.def = 0,
.flags = V4L2_CTRL_FLAG_WRITE_ONLY,
},
};
static const struct v4l2_ctrl_config mt9t001_gains[] = {
{
.ops = &mt9t001_ctrl_ops,
.id = V4L2_CID_GAIN_RED,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Gain, Red",
.min = MT9T001_GLOBAL_GAIN_MIN,
.max = MT9T001_GLOBAL_GAIN_MAX,
.step = 1,
.def = MT9T001_GLOBAL_GAIN_MIN,
.flags = 0,
}, {
.ops = &mt9t001_ctrl_ops,
.id = V4L2_CID_GAIN_GREEN_RED,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Gain, Green (R)",
.min = MT9T001_GLOBAL_GAIN_MIN,
.max = MT9T001_GLOBAL_GAIN_MAX,
.step = 1,
.def = MT9T001_GLOBAL_GAIN_MIN,
.flags = 0,
}, {
.ops = &mt9t001_ctrl_ops,
.id = V4L2_CID_GAIN_GREEN_BLUE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Gain, Green (B)",
.min = MT9T001_GLOBAL_GAIN_MIN,
.max = MT9T001_GLOBAL_GAIN_MAX,
.step = 1,
.def = MT9T001_GLOBAL_GAIN_MIN,
.flags = 0,
}, {
.ops = &mt9t001_ctrl_ops,
.id = V4L2_CID_GAIN_BLUE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Gain, Blue",
.min = MT9T001_GLOBAL_GAIN_MIN,
.max = MT9T001_GLOBAL_GAIN_MAX,
.step = 1,
.def = MT9T001_GLOBAL_GAIN_MIN,
.flags = 0,
},
};
/* -----------------------------------------------------------------------------
* V4L2 subdev core operations
*/
static int mt9t001_set_power(struct v4l2_subdev *subdev, int on)
{
struct mt9t001 *mt9t001 = to_mt9t001(subdev);
int ret = 0;
mutex_lock(&mt9t001->power_lock);
/* If the power count is modified from 0 to != 0 or from != 0 to 0,
* update the power state.
*/
if (mt9t001->power_count == !on) {
ret = __mt9t001_set_power(mt9t001, !!on);
if (ret < 0)
goto out;
}
/* Update the power count. */
mt9t001->power_count += on ? 1 : -1;
WARN_ON(mt9t001->power_count < 0);
out:
mutex_unlock(&mt9t001->power_lock);
return ret;
}
/* -----------------------------------------------------------------------------
* V4L2 subdev internal operations
*/
static int mt9t001_registered(struct v4l2_subdev *subdev)
{
struct i2c_client *client = v4l2_get_subdevdata(subdev);
struct mt9t001 *mt9t001 = to_mt9t001(subdev);
s32 data;
int ret;
ret = mt9t001_power_on(mt9t001);
if (ret < 0) {
dev_err(&client->dev, "MT9T001 power up failed\n");
return ret;
}
/* Read out the chip version register */
data = mt9t001_read(client, MT9T001_CHIP_VERSION);
mt9t001_power_off(mt9t001);
if (data != MT9T001_CHIP_ID) {
dev_err(&client->dev,
"MT9T001 not detected, wrong version 0x%04x\n", data);
return -ENODEV;
}
dev_info(&client->dev, "MT9T001 detected at address 0x%02x\n",
client->addr);
return 0;
}
static int mt9t001_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
{
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *crop;
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
crop = v4l2_subdev_get_try_crop(subdev, fh->pad, 0);
crop->left = MT9T001_COLUMN_START_DEF;
crop->top = MT9T001_ROW_START_DEF;
crop->width = MT9T001_WINDOW_WIDTH_DEF + 1;
crop->height = MT9T001_WINDOW_HEIGHT_DEF + 1;
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
format = v4l2_subdev_get_try_format(subdev, fh->pad, 0);
format->code = MEDIA_BUS_FMT_SGRBG10_1X10;
format->width = MT9T001_WINDOW_WIDTH_DEF + 1;
format->height = MT9T001_WINDOW_HEIGHT_DEF + 1;
format->field = V4L2_FIELD_NONE;
format->colorspace = V4L2_COLORSPACE_SRGB;
return mt9t001_set_power(subdev, 1);
}
static int mt9t001_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
{
return mt9t001_set_power(subdev, 0);
}
static struct v4l2_subdev_core_ops mt9t001_subdev_core_ops = {
.s_power = mt9t001_set_power,
};
static struct v4l2_subdev_video_ops mt9t001_subdev_video_ops = {
.s_stream = mt9t001_s_stream,
};
static struct v4l2_subdev_pad_ops mt9t001_subdev_pad_ops = {
.enum_mbus_code = mt9t001_enum_mbus_code,
.enum_frame_size = mt9t001_enum_frame_size,
.get_fmt = mt9t001_get_format,
.set_fmt = mt9t001_set_format,
.get_selection = mt9t001_get_selection,
.set_selection = mt9t001_set_selection,
};
static struct v4l2_subdev_ops mt9t001_subdev_ops = {
.core = &mt9t001_subdev_core_ops,
.video = &mt9t001_subdev_video_ops,
.pad = &mt9t001_subdev_pad_ops,
};
static struct v4l2_subdev_internal_ops mt9t001_subdev_internal_ops = {
.registered = mt9t001_registered,
.open = mt9t001_open,
.close = mt9t001_close,
};
static int mt9t001_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
struct mt9t001_platform_data *pdata = client->dev.platform_data;
struct mt9t001 *mt9t001;
unsigned int i;
int ret;
if (pdata == NULL) {
dev_err(&client->dev, "No platform data\n");
return -EINVAL;
}
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WORD_DATA)) {
dev_warn(&client->adapter->dev,
"I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
return -EIO;
}
mt9t001 = devm_kzalloc(&client->dev, sizeof(*mt9t001), GFP_KERNEL);
if (!mt9t001)
return -ENOMEM;
mutex_init(&mt9t001->power_lock);
mt9t001->output_control = MT9T001_OUTPUT_CONTROL_DEF;
mt9t001->regulators[0].supply = "vdd";
mt9t001->regulators[1].supply = "vaa";
ret = devm_regulator_bulk_get(&client->dev, 2, mt9t001->regulators);
if (ret < 0) {
dev_err(&client->dev, "Unable to get regulators\n");
return ret;
}
mt9t001->clk = devm_clk_get(&client->dev, NULL);
if (IS_ERR(mt9t001->clk)) {
dev_err(&client->dev, "Unable to get clock\n");
return PTR_ERR(mt9t001->clk);
}
v4l2_ctrl_handler_init(&mt9t001->ctrls, ARRAY_SIZE(mt9t001_ctrls) +
ARRAY_SIZE(mt9t001_gains) + 4);
v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops,
V4L2_CID_EXPOSURE, MT9T001_SHUTTER_WIDTH_MIN,
MT9T001_SHUTTER_WIDTH_MAX, 1,
MT9T001_SHUTTER_WIDTH_DEF);
v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops,
V4L2_CID_BLACK_LEVEL, 1, 1, 1, 1);
v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops,
V4L2_CID_PIXEL_RATE, pdata->ext_clk, pdata->ext_clk,
1, pdata->ext_clk);
v4l2_ctrl_new_std_menu_items(&mt9t001->ctrls, &mt9t001_ctrl_ops,
V4L2_CID_TEST_PATTERN,
ARRAY_SIZE(mt9t001_test_pattern_menu) - 1, 0,
0, mt9t001_test_pattern_menu);
for (i = 0; i < ARRAY_SIZE(mt9t001_ctrls); ++i)
v4l2_ctrl_new_custom(&mt9t001->ctrls, &mt9t001_ctrls[i], NULL);
for (i = 0; i < ARRAY_SIZE(mt9t001_gains); ++i)
mt9t001->gains[i] = v4l2_ctrl_new_custom(&mt9t001->ctrls,
&mt9t001_gains[i], NULL);
v4l2_ctrl_cluster(ARRAY_SIZE(mt9t001_gains), mt9t001->gains);
mt9t001->subdev.ctrl_handler = &mt9t001->ctrls;
if (mt9t001->ctrls.error) {
printk(KERN_INFO "%s: control initialization error %d\n",
__func__, mt9t001->ctrls.error);
ret = -EINVAL;
goto done;
}
mt9t001->crop.left = MT9T001_COLUMN_START_DEF;
mt9t001->crop.top = MT9T001_ROW_START_DEF;
mt9t001->crop.width = MT9T001_WINDOW_WIDTH_DEF + 1;
mt9t001->crop.height = MT9T001_WINDOW_HEIGHT_DEF + 1;
mt9t001->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
mt9t001->format.width = MT9T001_WINDOW_WIDTH_DEF + 1;
mt9t001->format.height = MT9T001_WINDOW_HEIGHT_DEF + 1;
mt9t001->format.field = V4L2_FIELD_NONE;
mt9t001->format.colorspace = V4L2_COLORSPACE_SRGB;
v4l2_i2c_subdev_init(&mt9t001->subdev, client, &mt9t001_subdev_ops);
mt9t001->subdev.internal_ops = &mt9t001_subdev_internal_ops;
mt9t001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
mt9t001->pad.flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&mt9t001->subdev.entity, 1, &mt9t001->pad);
done:
if (ret < 0) {
v4l2_ctrl_handler_free(&mt9t001->ctrls);
media_entity_cleanup(&mt9t001->subdev.entity);
}
return ret;
}
static int mt9t001_remove(struct i2c_client *client)
{
struct v4l2_subdev *subdev = i2c_get_clientdata(client);
struct mt9t001 *mt9t001 = to_mt9t001(subdev);
v4l2_ctrl_handler_free(&mt9t001->ctrls);
v4l2_device_unregister_subdev(subdev);
media_entity_cleanup(&subdev->entity);
return 0;
}
static const struct i2c_device_id mt9t001_id[] = {
{ "mt9t001", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mt9t001_id);
static struct i2c_driver mt9t001_driver = {
.driver = {
.name = "mt9t001",
},
.probe = mt9t001_probe,
.remove = mt9t001_remove,
.id_table = mt9t001_id,
};
module_i2c_driver(mt9t001_driver);
MODULE_DESCRIPTION("Aptina (Micron) MT9T001 Camera driver");
MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
MODULE_LICENSE("GPL");