2020-01-16 23:22:29 +08:00
|
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
|
|
%YAML 1.2
|
|
|
|
---
|
|
|
|
$id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml#
|
|
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
|
|
|
|
title: Rockchip designware mobile storage host controller device tree bindings
|
|
|
|
|
|
|
|
description:
|
|
|
|
Rockchip uses the Synopsys designware mobile storage host controller
|
|
|
|
to interface a SoC with storage medium such as eMMC or SD/MMC cards.
|
|
|
|
This file documents the combined properties for the core Synopsys dw mshc
|
|
|
|
controller that are not already included in the synopsys-dw-mshc-common.yaml
|
|
|
|
file and the Rockchip specific extensions.
|
|
|
|
|
|
|
|
allOf:
|
|
|
|
- $ref: "synopsys-dw-mshc-common.yaml#"
|
|
|
|
|
|
|
|
maintainers:
|
|
|
|
- Heiko Stuebner <heiko@sntech.de>
|
|
|
|
|
|
|
|
# Everything else is described in the common file
|
|
|
|
properties:
|
|
|
|
compatible:
|
|
|
|
oneOf:
|
|
|
|
# for Rockchip RK2928 and before RK3288
|
|
|
|
- const: rockchip,rk2928-dw-mshc
|
|
|
|
# for Rockchip RK3288
|
|
|
|
- const: rockchip,rk3288-dw-mshc
|
|
|
|
- items:
|
|
|
|
- enum:
|
|
|
|
# for Rockchip PX30
|
|
|
|
- rockchip,px30-dw-mshc
|
|
|
|
# for Rockchip RK3036
|
|
|
|
- rockchip,rk3036-dw-mshc
|
|
|
|
# for Rockchip RK322x
|
|
|
|
- rockchip,rk3228-dw-mshc
|
2020-01-16 23:22:30 +08:00
|
|
|
# for Rockchip RK3308
|
|
|
|
- rockchip,rk3308-dw-mshc
|
2020-01-16 23:22:29 +08:00
|
|
|
# for Rockchip RK3328
|
|
|
|
- rockchip,rk3328-dw-mshc
|
|
|
|
# for Rockchip RK3368
|
|
|
|
- rockchip,rk3368-dw-mshc
|
|
|
|
# for Rockchip RK3399
|
|
|
|
- rockchip,rk3399-dw-mshc
|
|
|
|
# for Rockchip RV1108
|
|
|
|
- rockchip,rv1108-dw-mshc
|
|
|
|
- const: rockchip,rk3288-dw-mshc
|
|
|
|
|
|
|
|
reg:
|
|
|
|
maxItems: 1
|
|
|
|
|
|
|
|
interrupts:
|
|
|
|
maxItems: 1
|
|
|
|
|
|
|
|
clocks:
|
|
|
|
minItems: 2
|
|
|
|
maxItems: 4
|
|
|
|
description:
|
|
|
|
Handle to "biu" and "ciu" clocks for the bus interface unit clock and
|
|
|
|
the card interface unit clock. If "ciu-drive" and "ciu-sample" are
|
|
|
|
specified in clock-names, it should also contain
|
|
|
|
handles to these clocks.
|
|
|
|
|
|
|
|
clock-names:
|
|
|
|
minItems: 2
|
|
|
|
items:
|
|
|
|
- const: biu
|
|
|
|
- const: ciu
|
|
|
|
- const: ciu-drive
|
|
|
|
- const: ciu-sample
|
|
|
|
description:
|
|
|
|
Apart from the clock-names "biu" and "ciu" two more clocks
|
|
|
|
"ciu-drive" and "ciu-sample" are supported. They are used
|
|
|
|
to control the clock phases, "ciu-sample" is required for tuning
|
|
|
|
high speed modes.
|
|
|
|
|
|
|
|
rockchip,default-sample-phase:
|
|
|
|
allOf:
|
|
|
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
minimum: 0
|
|
|
|
maximum: 360
|
|
|
|
default: 0
|
|
|
|
description:
|
|
|
|
The default phase to set "ciu-sample" at probing,
|
|
|
|
low speeds or in case where all phases work at tuning time.
|
|
|
|
If not specified 0 deg will be used.
|
|
|
|
|
|
|
|
rockchip,desired-num-phases:
|
|
|
|
allOf:
|
|
|
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
minimum: 0
|
|
|
|
maximum: 360
|
|
|
|
default: 360
|
|
|
|
description:
|
|
|
|
The desired number of times that the host execute tuning when needed.
|
|
|
|
If not specified, the host will do tuning for 360 times,
|
|
|
|
namely tuning for each degree.
|
|
|
|
|
|
|
|
required:
|
|
|
|
- compatible
|
|
|
|
- reg
|
|
|
|
- interrupts
|
|
|
|
- clocks
|
|
|
|
- clock-names
|
|
|
|
|
|
|
|
examples:
|
|
|
|
- |
|
|
|
|
#include <dt-bindings/clock/rk3288-cru.h>
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
sdmmc: mmc@ff0c0000 {
|
|
|
|
compatible = "rockchip,rk3288-dw-mshc";
|
|
|
|
reg = <0x0 0xff0c0000 0x0 0x4000>;
|
|
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
|
|
|
|
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
|
|
|
|
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
|
|
|
resets = <&cru SRST_MMC0>;
|
|
|
|
reset-names = "reset";
|
|
|
|
fifo-depth = <0x100>;
|
|
|
|
max-frequency = <150000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
...
|