openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

arm64: dts: Amlogic updates for v5.2 

Highlights
 - new board: SEI Robotics 510, based on S905X2 SoC (G12A)
 - enable more periphearls for S905X2 based boards
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlyejMcACgkQWTcYmtP7
 xmV0LQ//TloHVjh3MDKwp6hwVygi9eSIB+n0UP1KyH44Al565+OgWY8PN2lPWJhE
 4EpPDHgndJhWCABNVYXvuodStPPvH3qE4aibqdmtDaZP9jWVoAB53ZGyHvGkkAHp
 wzTlrX1WG2Rl6QI/ggrPU9bKYFponrBQYEyETNCFa3iGQPpmr2diwhZjz/DRbYYK
 BUUB1iFz5WCuLCviZMyeJipkjeio3Qpqegg2muEm1oUfdqM5loIJMxVND866gU7d
 /AiXy8Nky/EnapEUjau3pyuQQQOCNZXBsp8btRDaq9JURtft3uXAK3s6tHFQ0+qz
 mcjTrRdruOB9rgctlP8a5AqYnUx8IGorYlZxlorENZop6zrvOUDYSIKyZ7hapj3h
 0rvCz2JB7Lr/nN78pfchNHBDP+MackvJNAZw+zDOEXtNgq81ix4Mf392VAsgHX+6
 mC8CPzFeJuanhua+DXVBNtQ3ZNXOH3xozEQnGUwEJL/iZJ4T/vafAx0dl385wMGL
 m5oqVV4odRsNRcVRQlk7AO/atiBoOhBStPB7E3s90gWHEQXo1P2WKY2vEk05JGy8
 tpQ3tOjraxmitzPpr7pSAvLnAxkN+KwHDy55oGOCLdr4G60fuEpZJ5dJzLTDmrKe
 aaN5Ki/foGufxVMqqpLYaxosmyvbUp3Sn4UHF2jcImL3pPRgTNU=
 =SkrM
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.2

Highlights
- new board: SEI Robotics 510, based on S905X2 SoC (G12A)
- enable more periphearls for S905X2 based boards

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson-g12a: Add CMA reserved memory
  arm64: dts: meson-g12a-x96-max: Enable BT Module
  arm64: dts: meson-g12a-x96-max: add regulators
  arm64: dts: meson-g12a-sei510: add regulators
  arm64: dts: meson-g12a-x96-max: add uart_AO pinctrl
  arm64: dts: meson-g12a-sei510: add uart_AO pinctrl
  arm64: dts: meson-g12a-u200: add uart_AO pinctrl
  arm64: dts: meson: g12a: Add UART A, B & C nodes and pins
  arm64: dts: meson: g12a: add reset controller
  arm64: dts: meson: g12a: add uart_ao_a pinctrl
  arm64: dts: meson: g12a: add pinctrl support controllers
  arm64: dts: meson: g12a: Add AO Clock + Reset Controller support
  arm64: dts: meson-gxm-nexbox-a1: Enable USB
  arm64: dts: meson: g12a: add efuse
  arm64: dts: meson: g12a: add secure monitor
  arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED
  arm64: dts: meson-g12a: Add AO Secure node
  arm64: dts: Add SEI Robotics SEI510 Board
  vendor-prefixes: Add prefix for Shenzhen SEI Robotics Co., Ltd

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2019-04-28 12:14:10 -07:00
parent 79a3aaa7b8 e2cffeb398
commit 0159225bc9
9 changed files with 380 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/arm/amlogic.txt
View File

@ -110,6 +110,7 @@ Board compatible values (alphabetically, grouped by SoC):
- "amlogic,u200" (Meson g12a s905d2)
- "amediatech,x96-max" (Meson g12a s905x2)
- "seirobotics,sei510" (Meson g12a s905x2)
Amlogic Meson Firmware registers Interface
------------------------------------------

1
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -353,6 +353,7 @@ sandisk Sandisk Corporation
sbs Smart Battery System
schindler Schindler
seagate Seagate Technology PLC
seirobotics Shenzhen SEI Robotics Co., Ltd
semtech Semtech Corporation
sensirion Sensirion AG
sff Small Form Factor Committee

1
arch/arm64/boot/dts/amlogic/Makefile
View File

@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb

97
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts Normal file
View File

@ -0,0 +1,97 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 BayLibre SAS. All rights reserved.
*/
/dts-v1/;
#include "meson-g12a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
/ {
compatible = "seirobotics,sei510", "amlogic,g12a";
model = "SEI Robotics SEI510";
aliases {
serial0 = &uart_AO;
};
ao_5v: regulator-ao_5v {
compatible = "regulator-fixed";
regulator-name = "AO_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_in>;
regulator-always-on;
};
chosen {
stdout-path = "serial0:115200n8";
};
dc_in: regulator-dc_in {
compatible = "regulator-fixed";
regulator-name = "DC_IN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
emmc_1v8: regulator-emmc_1v8 {
compatible = "regulator-fixed";
regulator-name = "EMMC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
reserved-memory {
/* TEE Reserved Memory */
bl32_reserved: bl32@5000000 {
reg = <0x0 0x05300000 0x0 0x2000000>;
no-map;
};
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_in>;
regulator-always-on;
};
vddao_3v3_t: regultor-vddao_3v3_t {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3_T";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
enable-active-high;
};
vddio_ao1v8: regulator-vddio_ao1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};

2
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
View File

@ -25,5 +25,7 @@ memory@0 {
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};

81
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
View File

@ -6,6 +6,8 @@
/dts-v1/;
#include "meson-g12a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
/ {
compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a";
@ -21,8 +23,87 @@ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
flash_1v8: regulator-flash_1v8 {
compatible = "regulator-fixed";
regulator-name = "FLASH_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_3v3>;
regulator-always-on;
};
dc_in: regulator-dc_in {
compatible = "regulator-fixed";
regulator-name = "DC_IN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
vcc_1v8: regulator-vcc_1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_3v3>;
regulator-always-on;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
/* FIXME: actually controlled by VDDCPU_B_EN */
};
vcc_5v: regulator-vcc_5v {
compatible = "regulator-fixed";
regulator-name = "VCC_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_in>;
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
enable-active-low;
};
vddao_1v8: regulator-vddao_1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_in>;
regulator-always-on;
};
};
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
};
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};

183
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
View File

@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/g12a-clkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@ -55,6 +56,14 @@ l2: l2-cache0 {
};
};
efuse: efuse {
compatible = "amlogic,meson-gxbb-efuse";
clocks = <&clkc CLKID_EFUSE>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
@ -70,6 +79,18 @@ secmon_reserved: secmon@5000000 {
reg = <0x0 0x05000000 0x0 0x300000>;
no-map;
};
linux,cma {
compatible = "shared-dma-pool";
reusable;
size = <0x0 0x10000000>;
alignment = <0x0 0x400000>;
linux,cma-default;
};
};
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
};
soc {
@ -91,6 +112,74 @@ periphs: bus@34400 {
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
periphs_pinctrl: pinctrl@40 {
compatible = "amlogic,meson-g12a-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio: bank@40 {
reg = <0x0 0x40 0x0 0x4c>,
<0x0 0xe8 0x0 0x18>,
<0x0 0x120 0x0 0x18>,
<0x0 0x2c0 0x0 0x40>,
<0x0 0x340 0x0 0x1c>;
reg-names = "gpio",
"pull",
"pull-enable",
"mux",
"ds";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 0 86>;
};
uart_a_pins: uart-a {
mux {
groups = "uart_a_tx",
"uart_a_rx";
function = "uart_a";
bias-disable;
};
};
uart_a_cts_rts_pins: uart-a-cts-rts {
mux {
groups = "uart_a_cts",
"uart_a_rts";
function = "uart_a";
bias-disable;
};
};
uart_b_pins: uart-b {
mux {
groups = "uart_b_tx",
"uart_b_rx";
function = "uart_b";
bias-disable;
};
};
uart_c_pins: uart-c {
mux {
groups = "uart_c_tx",
"uart_c_rx";
function = "uart_c";
bias-disable;
};
};
uart_c_cts_rts_pins: uart-c-cts-rts {
mux {
groups = "uart_c_cts",
"uart_c_rts";
function = "uart_c";
bias-disable;
};
};
};
};
hiu: bus@3c000 {
@ -122,6 +211,66 @@ aobus: bus@ff800000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
rti: sys-ctrl@0 {
compatible = "amlogic,meson-gx-ao-sysctrl",
"simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0x0 0x0 0x100>;
clkc_AO: clock-controller {
compatible = "amlogic,meson-g12a-aoclkc";
#clock-cells = <1>;
#reset-cells = <1>;
clocks = <&xtal>, <&clkc CLKID_CLK81>;
clock-names = "xtal", "mpeg-clk";
};
ao_pinctrl: pinctrl@14 {
compatible = "amlogic,meson-g12a-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio_ao: bank@14 {
reg = <0x0 0x14 0x0 0x8>,
<0x0 0x1c 0x0 0x8>,
<0x0 0x24 0x0 0x14>;
reg-names = "mux",
"ds",
"gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&ao_pinctrl 0 0 15>;
};
uart_ao_a_pins: uart-a-ao {
mux {
groups = "uart_ao_a_tx",
"uart_ao_a_rx";
function = "uart_ao_a";
bias-disable;
};
};
uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
mux {
groups = "uart_ao_a_cts",
"uart_ao_a_rts";
function = "uart_ao_a";
bias-disable;
};
};
};
};
sec_AO: ao-secure@140 {
compatible = "amlogic,meson-gx-ao-secure", "syscon";
reg = <0x0 0x140 0x0 0x140>;
amlogic,has-chip-id;
};
uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
@ -163,10 +312,44 @@ cbus: bus@ffd00000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
reset: reset-controller@1004 {
compatible = "amlogic,meson-g12a-reset",
"amlogic,meson-axg-reset";
reg = <0x0 0x1004 0x0 0x9c>;
#reset-cells = <1>;
};
clk_msr: clock-measure@18000 {
compatible = "amlogic,meson-g12a-clk-measure";
reg = <0x0 0x18000 0x0 0x10>;
};
uart_C: serial@22000 {
compatible = "amlogic,meson-gx-uart";
reg = <0x0 0x22000 0x0 0x18>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
uart_B: serial@23000 {
compatible = "amlogic,meson-gx-uart";
reg = <0x0 0x23000 0x0 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
uart_A: serial@24000 {
compatible = "amlogic,meson-gx-uart";
reg = <0x0 0x24000 0x0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
};
};

10
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
View File

@ -14,6 +14,16 @@ / {
cvbs-connector {
status = "disabled";
};
leds {
compatible = "gpio-leds";
status {
label = "n1:white:status";
gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
};
&cvbs_vdac_port {

4
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
View File

@ -178,3 +178,7 @@ &uart_AO {
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&usb0 {
status = "okay";
};