openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge tag 'renesas-arm64-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc 

Pull "Renesas ARM64 Based SoC DT Updates for v4.15" from Simon Horman:

* r8a7795 (H3)
  - Use r8a7795-cpg-mssr and r8a7795-sysc bindings
    Hardcoded indicies are replaced with symbols now that they are available

  - Drop bogus HDMI node name suffixes
    Laurent Pinchart says: Node names should not use numerical suffixes if
    the nodes can be distinguished by unit-address

  - Update PFC node name to pin-controller
    Shimoda-san says the PFC node name is changed "from e6060000.pfc and
    pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000
    like other Renesas SoCs."

* r8a7795 (H3) ES1.0
  - Drop extra zero from XHCI unit address
    This corrects a typo were ee0400000 rather than ee040000 was used
    as the unit address.

* r8a7796 (M3-W)
  - Add FDP1 instance
    Laurent Pinchart says: The r8a7796 has a single FDP1 instance.

* r8a7795 (H3) and r8a7796 (M3-W) SoCs
  - Add USB3.0 peripheral device nodes
    Shimoda-san says that this is not enabled on the Salvator-X/XS boards
    for now as:
     + we need a special cable (USB type-A to A cross cable).
     + we can swap the role by renesas_usb3 driver even if we use a normal
	cable and after usb3.0 host is running, but I think it's a special
	use case.

* r8a7795 (H3) and r8a7796 (M3-W) ULCB boards
  - Enable display output
    Laurent Pinchart says: The DU is already wired up to the HDMI encoder,
    all we need to do is enable it.

* r8a77995 (D3) Draak board
  - Enable EthernetAVB and , USB2.0 Host and PHY

  - Add serial console pins.
    This is safe to do now that r8a77995 PFC driver support is present

* r8a77970 (V3M)
  - Add basic support for SoC and EtherAVB, [H]SCIF and SYS-DMAC nodes
    This is a step towards enabling EtherAVB and [H]SCIF with SYS-DMAC
    in the Eagle board support for which is under review

* tag 'renesas-arm64-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits)
  arm64: dts: renesas: r8a7796: add USB3.0 peripheral device node
  arm64: dts: renesas: r8a7795: add USB3.0 peripheral device node
  arm64: dts: renesas: r8a77995: draak: enable EthernetAVB
  arm64: dts: renesas: r8a77995: draak: enable USB2.0 Host (EHCI/OHCI)
  arm64: dts: renesas: r8a77995: draak: enable USB2.0 PHY
  arm64: dts: renesas: r8a77995: add USB2.0 Host (EHCI/OHCI) device node
  arm64: dts: renesas: r8a77995: Add USB2.0 PHY device node
  arm64: dts: draak: Add serial console pins
  arm64: dts: renesas: r8a77970: add EtherAVB support
  arm64: dts: renesas: r8a77970: add [H]SCIF support
  arm64: dts: renesas: r8a77970: add SYS-DMAC support
  arm64: dts: renesas: initial R8A77970 SoC device tree
  arm64: dts: renesas: r8a77995: Add EthernetAVB device node
  arm64: dts: renesas: r8a77995: add GPIO device nodes
  arm64: dts: renesas: r8a77995: Use r8a7795-cpg-mssr binding definitions
  arm64: dts: renesas: r8a77995: Use r8a7795-sysc binding definitions
  arm64: renesas: Add Renesas R8A77970 Kconfig support
  arm64: dts: renesas: r8a7795: Drop bogus HDMI node names suffixes
  arm64: dts: renesas: ulcb: Enable display output
  arm64: dts: renesas: r8a77995: update PFC node name to pin-controller
  ...
This commit is contained in:
Arnd Bergmann 2017-10-19 23:36:36 +02:00
parent 400f170dd3 2affee619d
commit 025792ca72
8 changed files with 669 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/arm64/Kconfig.platforms
View File

@ -184,6 +184,12 @@ config ARCH_R8A7796
help
This enables support for the Renesas R-Car M3-W SoC.
config ARCH_R8A77970
bool "Renesas R-Car V3M SoC Platform"
depends on ARCH_RENESAS
help
This enables support for the Renesas R-Car V3M SoC.
config ARCH_R8A77995
bool "Renesas R-Car D3 SoC Platform"
depends on ARCH_RENESAS

2
arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
View File

@ -11,7 +11,7 @@
#include "r8a7795.dtsi"
&soc {
xhci1: usb@ee0400000 {
xhci1: usb@ee040000 {
compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
reg = <0 0xee040000 0 0xc00>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;

15
arch/arm64/boot/dts/renesas/r8a7795.dtsi
View File

@ -1471,6 +1471,17 @@ xhci0: usb@ee000000 {
status = "disabled";
};
usb3_peri0: usb@ee020000 {
compatible = "renesas,r8a7795-usb3-peri",
"renesas,rcar-gen3-usb3-peri";
reg = <0 0xee020000 0 0x400>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 328>;
status = "disabled";
};
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a7795-usb-dmac",
"renesas,usb-dmac";
@ -2014,7 +2025,7 @@ fdp1@fe944000 {
renesas,fcp = <&fcpf1>;
};
hdmi0: hdmi0@fead0000 {
hdmi0: hdmi@fead0000 {
compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
reg = <0 0xfead0000 0 0x10000>;
interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
@ -2039,7 +2050,7 @@ port@1 {
};
};
hdmi1: hdmi1@feae0000 {
hdmi1: hdmi@feae0000 {
compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
reg = <0 0xfeae0000 0 0x10000>;
interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>;

21
arch/arm64/boot/dts/renesas/r8a7796.dtsi
View File

@ -1279,6 +1279,17 @@ xhci0: usb@ee000000 {
status = "disabled";
};
usb3_peri0: usb@ee020000 {
compatible = "renesas,r8a7796-usb3-peri",
"renesas,rcar-gen3-usb3-peri";
reg = <0 0xee020000 0 0x400>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 328>;
status = "disabled";
};
ohci0: usb@ee080000 {
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
@ -1659,6 +1670,16 @@ pciec1: pcie@ee800000 {
/* placeholder */
};
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 119>;
power-domains = <&sysc R8A7796_PD_A3VC>;
resets = <&cpg 119>;
renesas,fcp = <&fcpf0>;
};
fcpf0: fcp@fe950000 {
compatible = "renesas,fcpf";
reg = <0 0xfe950000 0 0x200>;

366
arch/arm64/boot/dts/renesas/r8a77970.dtsi Normal file
View File

@ -0,0 +1,366 @@
/*
* Device Tree Source for the r8a77970 SoC
*
* Copyright (C) 2016-2017 Renesas Electronics Corp.
* Copyright (C) 2017 Cogent Embedded, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/renesas-cpg-mssr.h>
/ {
compatible = "renesas,r8a77970";
#address-cells = <2>;
#size-cells = <2>;
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
a53_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0>;
clocks = <&cpg CPG_CORE 0>;
power-domains = <&sysc 5>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
};
L2_CA53: cache-controller {
compatible = "cache";
power-domains = <&sysc 21>;
cache-unified;
cache-level = <2>;
};
};
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
extalr_clk: extalr {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
/* External SCIF clock - to be overridden by boards that provide it */
scif_clk: scif {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1010000 0 0x1000>,
<0 0xf1020000 0 0x20000>,
<0 0xf1040000 0 0x20000>,
<0 0xf1060000 0 0x20000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc 32>;
resets = <&cpg 408>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>;
};
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77970-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
clocks = <&extal_clk>, <&extalr_clk>;
clock-names = "extal", "extalr";
#clock-cells = <2>;
#power-domain-cells = <0>;
#reset-cells = <1>;
};
rst: reset-controller@e6160000 {
compatible = "renesas,r8a77970-rst";
reg = <0 0xe6160000 0 0x200>;
};
sysc: system-controller@e6180000 {
compatible = "renesas,r8a77970-sysc";
reg = <0 0xe6180000 0 0x440>;
#power-domain-cells = <1>;
};
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
};
dmac1: dma-controller@e7300000 {
compatible = "renesas,dmac-r8a77970",
"renesas,rcar-dmac";
reg = <0 0xe7300000 0 0x10000>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7";
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc 32>;
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <8>;
};
dmac2: dma-controller@e7310000 {
compatible = "renesas,dmac-r8a77970",
"renesas,rcar-dmac";
reg = <0 0xe7310000 0 0x10000>;
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7";
clocks = <&cpg CPG_MOD 217>;
clock-names = "fck";
power-domains = <&sysc 32>;
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <8>;
};
hscif0: serial@e6540000 {
compatible = "renesas,hscif-r8a77970",
"renesas,rcar-gen3-hscif",
"renesas,hscif";
reg = <0 0xe6540000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 520>,
<&cpg CPG_CORE 9>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x31>, <&dmac1 0x30>,
<&dmac2 0x31>, <&dmac2 0x30>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc 32>;
resets = <&cpg 520>;
status = "disabled";
};
hscif1: serial@e6550000 {
compatible = "renesas,hscif-r8a77970",
"renesas,rcar-gen3-hscif",
"renesas,hscif";
reg = <0 0xe6550000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 519>,
<&cpg CPG_CORE 9>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x33>, <&dmac1 0x32>,
<&dmac2 0x33>, <&dmac2 0x32>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc 32>;
resets = <&cpg 519>;
status = "disabled";
};
hscif2: serial@e6560000 {
compatible = "renesas,hscif-r8a77970",
"renesas,rcar-gen3-hscif",
"renesas,hscif";
reg = <0 0xe6560000 0 96>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 518>,
<&cpg CPG_CORE 9>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x35>, <&dmac1 0x34>,
<&dmac2 0x35>, <&dmac2 0x34>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc 32>;
resets = <&cpg 518>;
status = "disabled";
};
hscif3: serial@e66a0000 {
compatible = "renesas,hscif-r8a77970",
"renesas,rcar-gen3-hscif", "renesas,hscif";
reg = <0 0xe66a0000 0 96>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 517>,
<&cpg CPG_CORE 9>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x37>, <&dmac1 0x36>,
<&dmac2 0x37>, <&dmac2 0x36>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc 32>;
resets = <&cpg 517>;
status = "disabled";
};
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a77970",
"renesas,rcar-gen3-scif",
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 207>,
<&cpg CPG_CORE 9>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x51>, <&dmac1 0x50>,
<&dmac2 0x51>, <&dmac2 0x50>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc 32>;
resets = <&cpg 207>;
status = "disabled";
};
scif1: serial@e6e68000 {
compatible = "renesas,scif-r8a77970",
"renesas,rcar-gen3-scif",
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 206>,
<&cpg CPG_CORE 9>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x53>, <&dmac1 0x52>,
<&dmac2 0x53>, <&dmac2 0x52>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc 32>;
resets = <&cpg 206>;
status = "disabled";
};
scif3: serial@e6c50000 {
compatible = "renesas,scif-r8a77970",
"renesas,rcar-gen3-scif",
"renesas,scif";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 204>,
<&cpg CPG_CORE 9>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x57>, <&dmac1 0x56>,
<&dmac2 0x57>, <&dmac2 0x56>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc 32>;
resets = <&cpg 204>;
status = "disabled";
};
scif4: serial@e6c40000 {
compatible = "renesas,scif-r8a77970",
"renesas,rcar-gen3-scif", "renesas,scif";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 203>,
<&cpg CPG_CORE 9>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x59>, <&dmac1 0x58>,
<&dmac2 0x59>, <&dmac2 0x58>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc 32>;
resets = <&cpg 203>;
status = "disabled";
};
avb: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a77970",
"renesas,etheravb-rcar-gen3";
reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14", "ch15",
"ch16", "ch17", "ch18", "ch19",
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc 32>;
resets = <&cpg 812>;
phy-mode = "rgmii-id";
#address-cells = <1>;
#size-cells = <0>;
};
};
};

55
arch/arm64/boot/dts/renesas/r8a77995-draak.dts
View File

@ -11,6 +11,7 @@
/dts-v1/;
#include "r8a77995.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Draak board based on r8a77995";
@ -18,6 +19,7 @@ / {
aliases {
serial0 = &scif2;
ethernet0 = &avb;
};
chosen {
@ -36,7 +38,60 @@ &extal_clk {
clock-frequency = <48000000>;
};
&pfc {
avb0_pins: avb {
mux {
groups = "avb0_link", "avb0_phy_int", "avb0_mdc",
"avb0_mii";
function = "avb0";
};
};
scif2_pins: scif2 {
groups = "scif2_data";
function = "scif2";
};
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
};
};
&ehci0 {
status = "okay";
};
&ohci0 {
status = "okay";
};
&avb {
pinctrl-0 = <&avb0_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";
phy0: ethernet-phy@0 {
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio5>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
};
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
status = "okay";
};

211
arch/arm64/boot/dts/renesas/r8a77995.dtsi
View File

@ -9,8 +9,9 @@
* kind, whether express or implied.
*/
#include <dt-bindings/clock/renesas-cpg-mssr.h>
#include <dt-bindings/clock/r8a77995-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a77995-sysc.h>
/ {
compatible = "renesas,r8a77995";
@ -30,14 +31,14 @@ a53_0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0>;
device_type = "cpu";
power-domains = <&sysc 5>;
power-domains = <&sysc R8A77995_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
};
L2_CA53: cache-controller-1 {
compatible = "cache";
power-domains = <&sysc 21>;
power-domains = <&sysc R8A77995_PD_CA53_SCU>;
cache-unified;
cache-level = <2>;
};
@ -76,7 +77,7 @@ gic: interrupt-controller@f1010000 {
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc 32>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
@ -97,7 +98,7 @@ rwdt: watchdog@e6020000 {
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc 32>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 402>;
status = "disabled";
};
@ -122,7 +123,7 @@ rst: reset-controller@e6160000 {
reg = <0 0xe6160000 0 0x0200>;
};
pfc: pfc@e6060000 {
pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a77995";
reg = <0 0xe6060000 0 0x508>;
};
@ -138,18 +139,212 @@ sysc: system-controller@e6180000 {
#power-domain-cells = <1>;
};
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a77995",
"renesas,rcar-gen3-gpio",
"renesas,gpio-rcar";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 9>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
compatible = "renesas,gpio-r8a77995",
"renesas,rcar-gen3-gpio",
"renesas,gpio-rcar";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
compatible = "renesas,gpio-r8a77995",
"renesas,rcar-gen3-gpio",
"renesas,gpio-rcar";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
compatible = "renesas,gpio-r8a77995",
"renesas,rcar-gen3-gpio",
"renesas,gpio-rcar";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 10>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
compatible = "renesas,gpio-r8a77995",
"renesas,rcar-gen3-gpio",
"renesas,gpio-rcar";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
compatible = "renesas,gpio-r8a77995",
"renesas,rcar-gen3-gpio",
"renesas,gpio-rcar";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 21>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
compatible = "renesas,gpio-r8a77995",
"renesas,rcar-gen3-gpio",
"renesas,gpio-rcar";
reg = <0 0xe6055400 0 0x50>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 192 14>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 906>;
};
avb: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a77995",
"renesas,etheravb-rcar-gen3";
reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14", "ch15",
"ch16", "ch17", "ch18", "ch19",
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii-txid";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a77995",
"renesas,rcar-gen3-scif", "renesas,scif";
reg = <0 0xe6e88000 0 64>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 310>,
<&cpg CPG_CORE 16>,
<&cpg CPG_CORE R8A77995_CLK_S3D1C>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&sysc 32>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 310>;
status = "disabled";
};
ehci0: usb@ee080100 {
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 703>;
status = "disabled";
};
ohci0: usb@ee080000 {
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 703>;
status = "disabled";
};
usb2_phy0: usb-phy@ee080200 {
compatible = "renesas,usb2-phy-r8a77995",
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 703>;
#phy-cells = <0>;
status = "disabled";
};
};
};

4
arch/arm64/boot/dts/renesas/ulcb.dtsi
View File

@ -157,6 +157,10 @@ phy0: ethernet-phy@0 {
};
};
&du {
status = "okay";
};
&ehci1 {
status = "okay";
};