openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge remote-tracking branches 'regulator/topic/lp8755', 'regulator/topic/max14577', 'regulator/topic/max77693', 'regulator/topic/max77843' and 'regulator/topic/max8973' into regulator-next

This commit is contained in:
Mark Brown 2015-06-22 11:19:55 +01:00
parent c16bcf03c8 840499aa00 cab344d341 39d2330866 6986f44c4c 366604ec0d
commit 0460a368ea
7 changed files with 320 additions and 209 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
Documentation/devicetree/bindings/regulator/max8973-regulator.txt
View File

@ -2,12 +2,30 @@
Required properties:
- compatible: must be "maxim,max8973"
- compatible: must be one of following:
"maxim,max8973"
"maxim,max77621".
- reg: the i2c slave address of the regulator. It should be 0x1b.
Any standard regulator properties can be used to configure the single max8973
DCDC.
Optional properties:
-maxim,externally-enable: boolean, externally control the regulator output
enable/disable.
-maxim,enable-gpio: GPIO for enable control. If the valid GPIO is provided
then externally enable control will be considered.
-maxim,dvs-gpio: GPIO which is connected to DVS pin of device.
-maxim,dvs-default-state: Default state of GPIO during initialisation.
1 for HIGH and 0 for LOW.
-maxim,enable-remote-sense: boolean, enable reote sense.
-maxim,enable-falling-slew-rate: boolean, enable falling slew rate.
-maxim,enable-active-discharge: boolean: enable active discharge.
-maxim,enable-frequency-shift: boolean, enable 9% frequency shift.
-maxim,enable-bias-control: boolean, enable bias control. By enabling this
startup delay can be reduce to 20us from 220us.
Example:
max8973@1b {

23
drivers/regulator/lp8755.c
View File

@ -419,20 +419,16 @@ static int lp8755_int_config(struct lp8755_chip *pchip)
}
ret = lp8755_read(pchip, 0x0F, &regval);
if (ret < 0)
goto err_i2c;
pchip->irqmask = regval;
ret = request_threaded_irq(pchip->irq, NULL, lp8755_irq_handler,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"lp8755-irq", pchip);
if (ret)
if (ret < 0) {
dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
return ret;
}
return ret;
err_i2c:
dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
return ret;
pchip->irqmask = regval;
return devm_request_threaded_irq(pchip->dev, pchip->irq, NULL,
lp8755_irq_handler,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"lp8755-irq", pchip);
}
static const struct regmap_config lp8755_regmap = {
@ -514,9 +510,6 @@ static int lp8755_remove(struct i2c_client *client)
for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
lp8755_write(pchip, icnt, 0x00);
if (pchip->irq != 0)
free_irq(pchip->irq, pchip);
return 0;
}

128
drivers/regulator/max14577.c
View File

@ -100,31 +100,34 @@ static struct regulator_ops max14577_charger_ops = {
.set_current_limit = max14577_reg_set_current_limit,
};
#define MAX14577_SAFEOUT_REG { \
.name = "SAFEOUT", \
.of_match = of_match_ptr("SAFEOUT"), \
.regulators_node = of_match_ptr("regulators"), \
.id = MAX14577_SAFEOUT, \
.ops = &max14577_safeout_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.n_voltages = 1, \
.min_uV = MAX14577_REGULATOR_SAFEOUT_VOLTAGE, \
.enable_reg = MAX14577_REG_CONTROL2, \
.enable_mask = CTRL2_SFOUTORD_MASK, \
}
#define MAX14577_CHARGER_REG { \
.name = "CHARGER", \
.of_match = of_match_ptr("CHARGER"), \
.regulators_node = of_match_ptr("regulators"), \
.id = MAX14577_CHARGER, \
.ops = &max14577_charger_ops, \
.type = REGULATOR_CURRENT, \
.owner = THIS_MODULE, \
.enable_reg = MAX14577_CHG_REG_CHG_CTRL2, \
.enable_mask = CHGCTRL2_MBCHOSTEN_MASK, \
}
static const struct regulator_desc max14577_supported_regulators[] = {
[MAX14577_SAFEOUT] = {
.name = "SAFEOUT",
.of_match = of_match_ptr("SAFEOUT"),
.regulators_node = of_match_ptr("regulators"),
.id = MAX14577_SAFEOUT,
.ops = &max14577_safeout_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
.enable_reg = MAX14577_REG_CONTROL2,
.enable_mask = CTRL2_SFOUTORD_MASK,
},
[MAX14577_CHARGER] = {
.name = "CHARGER",
.of_match = of_match_ptr("CHARGER"),
.regulators_node = of_match_ptr("regulators"),
.id = MAX14577_CHARGER,
.ops = &max14577_charger_ops,
.type = REGULATOR_CURRENT,
.owner = THIS_MODULE,
.enable_reg = MAX14577_CHG_REG_CHG_CTRL2,
.enable_mask = CHGCTRL2_MBCHOSTEN_MASK,
},
[MAX14577_SAFEOUT] = MAX14577_SAFEOUT_REG,
[MAX14577_CHARGER] = MAX14577_CHARGER_REG,
};
static struct regulator_ops max77836_ldo_ops = {
@ -138,63 +141,28 @@ static struct regulator_ops max77836_ldo_ops = {
/* TODO: add .set_suspend_mode */
};
#define MAX77836_LDO_REG(num) { \
.name = "LDO" # num, \
.of_match = of_match_ptr("LDO" # num), \
.regulators_node = of_match_ptr("regulators"), \
.id = MAX77836_LDO ## num, \
.ops = &max77836_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.n_voltages = MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM, \
.min_uV = MAX77836_REGULATOR_LDO_VOLTAGE_MIN, \
.uV_step = MAX77836_REGULATOR_LDO_VOLTAGE_STEP, \
.enable_reg = MAX77836_LDO_REG_CNFG1_LDO ## num, \
.enable_mask = MAX77836_CNFG1_LDO_PWRMD_MASK, \
.vsel_reg = MAX77836_LDO_REG_CNFG1_LDO ## num, \
.vsel_mask = MAX77836_CNFG1_LDO_TV_MASK, \
}
static const struct regulator_desc max77836_supported_regulators[] = {
[MAX14577_SAFEOUT] = {
.name = "SAFEOUT",
.of_match = of_match_ptr("SAFEOUT"),
.regulators_node = of_match_ptr("regulators"),
.id = MAX14577_SAFEOUT,
.ops = &max14577_safeout_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
.enable_reg = MAX14577_REG_CONTROL2,
.enable_mask = CTRL2_SFOUTORD_MASK,
},
[MAX14577_CHARGER] = {
.name = "CHARGER",
.of_match = of_match_ptr("CHARGER"),
.regulators_node = of_match_ptr("regulators"),
.id = MAX14577_CHARGER,
.ops = &max14577_charger_ops,
.type = REGULATOR_CURRENT,
.owner = THIS_MODULE,
.enable_reg = MAX14577_CHG_REG_CHG_CTRL2,
.enable_mask = CHGCTRL2_MBCHOSTEN_MASK,
},
[MAX77836_LDO1] = {
.name = "LDO1",
.of_match = of_match_ptr("LDO1"),
.regulators_node = of_match_ptr("regulators"),
.id = MAX77836_LDO1,
.ops = &max77836_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.n_voltages = MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM,
.min_uV = MAX77836_REGULATOR_LDO_VOLTAGE_MIN,
.uV_step = MAX77836_REGULATOR_LDO_VOLTAGE_STEP,
.enable_reg = MAX77836_LDO_REG_CNFG1_LDO1,
.enable_mask = MAX77836_CNFG1_LDO_PWRMD_MASK,
.vsel_reg = MAX77836_LDO_REG_CNFG1_LDO1,
.vsel_mask = MAX77836_CNFG1_LDO_TV_MASK,
},
[MAX77836_LDO2] = {
.name = "LDO2",
.of_match = of_match_ptr("LDO2"),
.regulators_node = of_match_ptr("regulators"),
.id = MAX77836_LDO2,
.ops = &max77836_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.n_voltages = MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM,
.min_uV = MAX77836_REGULATOR_LDO_VOLTAGE_MIN,
.uV_step = MAX77836_REGULATOR_LDO_VOLTAGE_STEP,
.enable_reg = MAX77836_LDO_REG_CNFG1_LDO2,
.enable_mask = MAX77836_CNFG1_LDO_PWRMD_MASK,
.vsel_reg = MAX77836_LDO_REG_CNFG1_LDO2,
.vsel_mask = MAX77836_CNFG1_LDO_TV_MASK,
},
[MAX14577_SAFEOUT] = MAX14577_SAFEOUT_REG,
[MAX14577_CHARGER] = MAX14577_CHARGER_REG,
[MAX77836_LDO1] = MAX77836_LDO_REG(1),
[MAX77836_LDO2] = MAX77836_LDO_REG(2),
};
#ifdef CONFIG_OF

17
drivers/regulator/max77693.c
View File

@ -35,20 +35,6 @@
#define CHGIN_ILIM_STEP_20mA 20000
/* CHARGER regulator ops */
/* CHARGER regulator uses two bits for enabling */
static int max77693_chg_is_enabled(struct regulator_dev *rdev)
{
int ret;
unsigned int val;
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
if (ret)
return ret;
return (val & rdev->desc->enable_mask) == rdev->desc->enable_mask;
}
/*
* CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
* 0x00, 0x01, 0x2, 0x03 = 60 mA
@ -118,7 +104,7 @@ static struct regulator_ops max77693_safeout_ops = {
};
static struct regulator_ops max77693_charger_ops = {
.is_enabled = max77693_chg_is_enabled,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_current_limit = max77693_chg_get_current_limit,
@ -155,6 +141,7 @@ static const struct regulator_desc regulators[] = {
.enable_reg = MAX77693_CHG_REG_CHG_CNFG_00,
.enable_mask = CHG_CNFG_00_CHG_MASK |
CHG_CNFG_00_BUCK_MASK,
.enable_val = CHG_CNFG_00_CHG_MASK | CHG_CNFG_00_BUCK_MASK,
},
};

68
drivers/regulator/max77843.c
View File

@ -33,21 +33,6 @@ static const unsigned int max77843_safeout_voltage_table[] = {
3300000,
};
static int max77843_reg_is_enabled(struct regulator_dev *rdev)
{
struct regmap *regmap = rdev->regmap;
int ret;
unsigned int reg;
ret = regmap_read(regmap, rdev->desc->enable_reg, &reg);
if (ret) {
dev_err(&rdev->dev, "Fialed to read charger register\n");
return ret;
}
return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
}
static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
{
struct regmap *regmap = rdev->regmap;
@ -96,7 +81,7 @@ static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
}
static struct regulator_ops max77843_charger_ops = {
.is_enabled = max77843_reg_is_enabled,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_current_limit = max77843_reg_get_current_limit,
@ -112,37 +97,25 @@ static struct regulator_ops max77843_regulator_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
#define MAX77843_SAFEOUT(num) { \
.name = "SAFEOUT" # num, \
.id = MAX77843_SAFEOUT ## num, \
.ops = &max77843_regulator_ops, \
.of_match = of_match_ptr("SAFEOUT" # num), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table), \
.volt_table = max77843_safeout_voltage_table, \
.enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \
.enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num, \
.vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \
.vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \
}
static const struct regulator_desc max77843_supported_regulators[] = {
[MAX77843_SAFEOUT1] = {
.name = "SAFEOUT1",
.id = MAX77843_SAFEOUT1,
.ops = &max77843_regulator_ops,
.of_match = of_match_ptr("SAFEOUT1"),
.regulators_node = of_match_ptr("regulators"),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
.volt_table = max77843_safeout_voltage_table,
.enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
.enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
.vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
.vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
},
[MAX77843_SAFEOUT2] = {
.name = "SAFEOUT2",
.id = MAX77843_SAFEOUT2,
.ops = &max77843_regulator_ops,
.of_match = of_match_ptr("SAFEOUT2"),
.regulators_node = of_match_ptr("regulators"),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
.volt_table = max77843_safeout_voltage_table,
.enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
.enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
.vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
.vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
},
[MAX77843_SAFEOUT1] = MAX77843_SAFEOUT(1),
[MAX77843_SAFEOUT2] = MAX77843_SAFEOUT(2),
[MAX77843_CHARGER] = {
.name = "CHARGER",
.id = MAX77843_CHARGER,
@ -152,7 +125,8 @@ static const struct regulator_desc max77843_supported_regulators[] = {
.type = REGULATOR_CURRENT,
.owner = THIS_MODULE,
.enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
.enable_mask = MAX77843_CHG_MASK,
.enable_mask = MAX77843_CHG_MASK | MAX77843_CHG_BUCK_MASK,
.enable_val = MAX77843_CHG_MASK | MAX77843_CHG_BUCK_MASK,
},
};

269
drivers/regulator/max8973-regulator.c
View File

@ -27,12 +27,14 @@
#include <linux/init.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8973-regulator.h>
#include <linux/regulator/of_regulator.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/regmap.h>
@ -66,6 +68,7 @@
#define MAX8973_RAMP_25mV_PER_US 0x1
#define MAX8973_RAMP_50mV_PER_US 0x2
#define MAX8973_RAMP_200mV_PER_US 0x3
#define MAX8973_RAMP_MASK 0x3
/* MAX8973_CONTROL2 */
#define MAX8973_WDTMR_ENABLE BIT(6)
@ -89,19 +92,25 @@
#define MAX8973_VOLATGE_STEP 6250
#define MAX8973_BUCK_N_VOLTAGE 0x80
enum device_id {
MAX8973,
MAX77621
};
/* Maxim 8973 chip information */
struct max8973_chip {
struct device *dev;
struct regulator_desc desc;
struct regmap *regmap;
bool enable_external_control;
int enable_gpio;
int dvs_gpio;
int lru_index[MAX8973_MAX_VOUT_REG];
int curr_vout_val[MAX8973_MAX_VOUT_REG];
int curr_vout_reg;
int curr_gpio_val;
bool valid_dvs_gpio;
struct regulator_ops ops;
enum device_id id;
};
/*
@ -174,7 +183,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
* If gpios are available to select the VOUT register then least
* recently used register for new configuration.
*/
if (max->valid_dvs_gpio)
if (gpio_is_valid(max->dvs_gpio))
found = find_voltage_set_register(max, vsel,
&vout_reg, &gpio_val);
@ -191,7 +200,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
}
/* Select proper VOUT register vio gpios */
if (max->valid_dvs_gpio) {
if (gpio_is_valid(max->dvs_gpio)) {
gpio_set_value_cansleep(max->dvs_gpio, gpio_val & 0x1);
max->curr_gpio_val = gpio_val;
}
@ -242,12 +251,45 @@ static unsigned int max8973_dcdc_get_mode(struct regulator_dev *rdev)
REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
}
static int max8973_set_ramp_delay(struct regulator_dev *rdev,
int ramp_delay)
{
struct max8973_chip *max = rdev_get_drvdata(rdev);
unsigned int control;
int ret;
int ret_val;
/* Set ramp delay */
if (ramp_delay < 25000) {
control = MAX8973_RAMP_12mV_PER_US;
ret_val = 12000;
} else if (ramp_delay < 50000) {
control = MAX8973_RAMP_25mV_PER_US;
ret_val = 25000;
} else if (ramp_delay < 200000) {
control = MAX8973_RAMP_50mV_PER_US;
ret_val = 50000;
} else {
control = MAX8973_RAMP_200mV_PER_US;
ret_val = 200000;
}
ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1,
MAX8973_RAMP_MASK, control);
if (ret < 0)
dev_err(max->dev, "register %d update failed, %d",
MAX8973_CONTROL1, ret);
return ret;
}
static const struct regulator_ops max8973_dcdc_ops = {
.get_voltage_sel = max8973_dcdc_get_voltage_sel,
.set_voltage_sel = max8973_dcdc_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.set_mode = max8973_dcdc_set_mode,
.get_mode = max8973_dcdc_get_mode,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max8973_set_ramp_delay,
};
static int max8973_init_dcdc(struct max8973_chip *max,
@ -256,6 +298,29 @@ static int max8973_init_dcdc(struct max8973_chip *max,
int ret;
uint8_t control1 = 0;
uint8_t control2 = 0;
unsigned int data;
ret = regmap_read(max->regmap, MAX8973_CONTROL1, &data);
if (ret < 0) {
dev_err(max->dev, "register %d read failed, err = %d",
MAX8973_CONTROL1, ret);
return ret;
}
control1 = data & MAX8973_RAMP_MASK;
switch (control1) {
case MAX8973_RAMP_12mV_PER_US:
max->desc.ramp_delay = 12000;
break;
case MAX8973_RAMP_25mV_PER_US:
max->desc.ramp_delay = 25000;
break;
case MAX8973_RAMP_50mV_PER_US:
max->desc.ramp_delay = 50000;
break;
case MAX8973_RAMP_200mV_PER_US:
max->desc.ramp_delay = 200000;
break;
}
if (pdata->control_flags & MAX8973_CONTROL_REMOTE_SENSE_ENABLE)
control1 |= MAX8973_SNS_ENABLE;
@ -266,28 +331,16 @@ static int max8973_init_dcdc(struct max8973_chip *max,
if (pdata->control_flags & MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE)
control1 |= MAX8973_AD_ENABLE;
if (pdata->control_flags & MAX8973_CONTROL_BIAS_ENABLE)
if (pdata->control_flags & MAX8973_CONTROL_BIAS_ENABLE) {
control1 |= MAX8973_BIAS_ENABLE;
max->desc.enable_time = 20;
} else {
max->desc.enable_time = 240;
}
if (pdata->control_flags & MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE)
control1 |= MAX8973_FREQSHIFT_9PER;
/* Set ramp delay */
if (pdata->reg_init_data &&
pdata->reg_init_data->constraints.ramp_delay) {
if (pdata->reg_init_data->constraints.ramp_delay < 25000)
control1 |= MAX8973_RAMP_12mV_PER_US;
else if (pdata->reg_init_data->constraints.ramp_delay < 50000)
control1 |= MAX8973_RAMP_25mV_PER_US;
else if (pdata->reg_init_data->constraints.ramp_delay < 200000)
control1 |= MAX8973_RAMP_50mV_PER_US;
else
control1 |= MAX8973_RAMP_200mV_PER_US;
} else {
control1 |= MAX8973_RAMP_12mV_PER_US;
max->desc.ramp_delay = 12500;
}
if (!(pdata->control_flags & MAX8973_CONTROL_PULL_DOWN_ENABLE))
control2 |= MAX8973_DISCH_ENBABLE;
@ -344,7 +397,7 @@ static int max8973_init_dcdc(struct max8973_chip *max,
}
/* If external control is enabled then disable EN bit */
if (max->enable_external_control) {
if (max->enable_external_control && (max->id == MAX8973)) {
ret = regmap_update_bits(max->regmap, MAX8973_VOUT,
MAX8973_VOUT_ENABLE, 0);
if (ret < 0)
@ -361,22 +414,82 @@ static const struct regmap_config max8973_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
static struct max8973_regulator_platform_data *max8973_parse_dt(
struct device *dev)
{
struct max8973_regulator_platform_data *pdata;
struct device_node *np = dev->of_node;
int ret;
u32 pval;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
pdata->enable_ext_control = of_property_read_bool(np,
"maxim,externally-enable");
pdata->enable_gpio = of_get_named_gpio(np, "maxim,enable-gpio", 0);
pdata->dvs_gpio = of_get_named_gpio(np, "maxim,dvs-gpio", 0);
ret = of_property_read_u32(np, "maxim,dvs-default-state", &pval);
if (!ret)
pdata->dvs_def_state = pval;
if (of_property_read_bool(np, "maxim,enable-remote-sense"))
pdata->control_flags |= MAX8973_CONTROL_REMOTE_SENSE_ENABLE;
if (of_property_read_bool(np, "maxim,enable-falling-slew-rate"))
pdata->control_flags |=
MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE;
if (of_property_read_bool(np, "maxim,enable-active-discharge"))
pdata->control_flags |=
MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE;
if (of_property_read_bool(np, "maxim,enable-frequency-shift"))
pdata->control_flags |= MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE;
if (of_property_read_bool(np, "maxim,enable-bias-control"))
pdata->control_flags |= MAX8973_BIAS_ENABLE;
return pdata;
}
static const struct of_device_id of_max8973_match_tbl[] = {
{ .compatible = "maxim,max8973", .data = (void *)MAX8973, },
{ .compatible = "maxim,max77621", .data = (void *)MAX77621, },
{ },
};
MODULE_DEVICE_TABLE(of, of_max8973_match_tbl);
static int max8973_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max8973_regulator_platform_data *pdata;
struct regulator_init_data *ridata;
struct regulator_config config = { };
struct regulator_dev *rdev;
struct max8973_chip *max;
bool pdata_from_dt = false;
unsigned int chip_id;
int ret;
pdata = dev_get_platdata(&client->dev);
if (!pdata && !client->dev.of_node) {
if (!pdata && client->dev.of_node) {
pdata = max8973_parse_dt(&client->dev);
pdata_from_dt = true;
}
if (!pdata) {
dev_err(&client->dev, "No Platform data");
return -EIO;
}
if ((pdata->dvs_gpio == -EPROBE_DEFER) ||
(pdata->enable_gpio == -EPROBE_DEFER))
return -EPROBE_DEFER;
max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
@ -388,6 +501,27 @@ static int max8973_probe(struct i2c_client *client,
return ret;
}
if (client->dev.of_node) {
const struct of_device_id *match;
match = of_match_device(of_match_ptr(of_max8973_match_tbl),
&client->dev);
if (!match)
return -ENODATA;
max->id = (u32)((uintptr_t)match->data);
} else {
max->id = id->driver_data;
}
ret = regmap_read(max->regmap, MAX8973_CHIPID1, &chip_id);
if (ret < 0) {
dev_err(&client->dev, "register CHIPID1 read failed, %d", ret);
return ret;
}
dev_info(&client->dev, "CHIP-ID OTP: 0x%02x ID_M: 0x%02x\n",
(chip_id >> 4) & 0xF, (chip_id >> 1) & 0x7);
i2c_set_clientdata(client, max);
max->ops = max8973_dcdc_ops;
max->dev = &client->dev;
@ -400,23 +534,14 @@ static int max8973_probe(struct i2c_client *client,
max->desc.uV_step = MAX8973_VOLATGE_STEP;
max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE;
if (!pdata || !pdata->enable_ext_control) {
max->desc.enable_reg = MAX8973_VOUT;
max->desc.enable_mask = MAX8973_VOUT_ENABLE;
max->ops.enable = regulator_enable_regmap;
max->ops.disable = regulator_disable_regmap;
max->ops.is_enabled = regulator_is_enabled_regmap;
}
max->dvs_gpio = (pdata->dvs_gpio) ? pdata->dvs_gpio : -EINVAL;
max->enable_gpio = (pdata->enable_gpio) ? pdata->enable_gpio : -EINVAL;
max->enable_external_control = pdata->enable_ext_control;
max->curr_gpio_val = pdata->dvs_def_state;
max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
if (pdata) {
max->dvs_gpio = pdata->dvs_gpio;
max->enable_external_control = pdata->enable_ext_control;
max->curr_gpio_val = pdata->dvs_def_state;
max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
} else {
max->dvs_gpio = -EINVAL;
max->curr_vout_reg = MAX8973_VOUT;
}
if (gpio_is_valid(max->enable_gpio))
max->enable_external_control = true;
max->lru_index[0] = max->curr_vout_reg;
@ -434,7 +559,6 @@ static int max8973_probe(struct i2c_client *client,
max->dvs_gpio, ret);
return ret;
}
max->valid_dvs_gpio = true;
/*
* Initialize the lru index with vout_reg id
@ -444,22 +568,64 @@ static int max8973_probe(struct i2c_client *client,
max->lru_index[i] = i;
max->lru_index[0] = max->curr_vout_reg;
max->lru_index[max->curr_vout_reg] = 0;
} else {
max->valid_dvs_gpio = false;
}
if (pdata) {
ret = max8973_init_dcdc(max, pdata);
if (ret < 0) {
dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
return ret;
if (pdata_from_dt)
pdata->reg_init_data = of_get_regulator_init_data(&client->dev,
client->dev.of_node, &max->desc);
ridata = pdata->reg_init_data;
switch (max->id) {
case MAX8973:
if (!pdata->enable_ext_control) {
max->desc.enable_reg = MAX8973_VOUT;
max->desc.enable_mask = MAX8973_VOUT_ENABLE;
max->ops.enable = regulator_enable_regmap;
max->ops.disable = regulator_disable_regmap;
max->ops.is_enabled = regulator_is_enabled_regmap;
break;
}
if (gpio_is_valid(max->enable_gpio)) {
config.ena_gpio_flags = GPIOF_OUT_INIT_LOW;
if (ridata && (ridata->constraints.always_on ||
ridata->constraints.boot_on))
config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
config.ena_gpio = max->enable_gpio;
}
break;
case MAX77621:
if (gpio_is_valid(max->enable_gpio)) {
ret = devm_gpio_request_one(&client->dev,
max->enable_gpio, GPIOF_OUT_INIT_HIGH,
"max8973-en-gpio");
if (ret) {
dev_err(&client->dev,
"gpio_request for gpio %d failed: %d\n",
max->enable_gpio, ret);
return ret;
}
}
max->desc.enable_reg = MAX8973_VOUT;
max->desc.enable_mask = MAX8973_VOUT_ENABLE;
max->ops.enable = regulator_enable_regmap;
max->ops.disable = regulator_disable_regmap;
max->ops.is_enabled = regulator_is_enabled_regmap;
break;
default:
break;
}
ret = max8973_init_dcdc(max, pdata);
if (ret < 0) {
dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
return ret;
}
config.dev = &client->dev;
config.init_data = pdata ? pdata->reg_init_data :
of_get_regulator_init_data(&client->dev, client->dev.of_node,
&max->desc);
config.init_data = pdata->reg_init_data;
config.driver_data = max;
config.of_node = client->dev.of_node;
config.regmap = max->regmap;
@ -476,15 +642,16 @@ static int max8973_probe(struct i2c_client *client,
}
static const struct i2c_device_id max8973_id[] = {
{.name = "max8973",},
{.name = "max8973", .driver_data = MAX8973},
{.name = "max77621", .driver_data = MAX77621},
{},
};
MODULE_DEVICE_TABLE(i2c, max8973_id);
static struct i2c_driver max8973_i2c_driver = {
.driver = {
.name = "max8973",
.of_match_table = of_max8973_match_tbl,
.owner = THIS_MODULE,
},
.probe = max8973_probe,

4
include/linux/regulator/max8973-regulator.h
View File

@ -58,6 +58,9 @@
* control signal from EN input pin. If it is false then
* voltage output will be enabled/disabled through EN bit of
* device register.
* @enable_gpio: Enable GPIO. If EN pin is controlled through GPIO from host
* then GPIO number can be provided. If no GPIO controlled then
* it should be -1.
* @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic.
* @dvs_def_state: Default state of dvs. 1 if it is high else 0.
*/
@ -65,6 +68,7 @@ struct max8973_regulator_platform_data {
struct regulator_init_data *reg_init_data;
unsigned long control_flags;
bool enable_ext_control;
int enable_gpio;
int dvs_gpio;
unsigned dvs_def_state:1;
};