From 054d4b7b577de6f5d25a0d443f0d59410bf156ad Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Thu, 29 Sep 2016 17:59:02 +0800 Subject: [PATCH] usb: ohci-at91: Use descriptor-based gpio APIs Use the descriptor-based interface to manipulate GPIOs, instead of the legacy integer-based interface. Signed-off-by: Wenyou Yang Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-at91.c | 121 +++++++++-------------------------- 1 file changed, 31 insertions(+), 90 deletions(-) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 5b5880c0ae19..2ebea306151d 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -14,8 +14,8 @@ #include #include +#include #include -#include #include #include #include @@ -39,8 +39,8 @@ #define AT91_MAX_USBH_PORTS 3 struct at91_usbh_data { - int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ - int overcurrent_pin[AT91_MAX_USBH_PORTS]; + struct gpio_desc *vbus_pin[AT91_MAX_USBH_PORTS]; + struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS]; u8 ports; /* number of ports on root hub */ u8 overcurrent_supported; u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; @@ -262,11 +262,8 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int if (!valid_port(port)) return; - if (!gpio_is_valid(pdata->vbus_pin[port])) - return; - - gpio_set_value(pdata->vbus_pin[port], - pdata->vbus_pin_active_low[port] ^ enable); + gpiod_set_value(pdata->vbus_pin[port], + pdata->vbus_pin_active_low[port] ^ enable); } static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) @@ -274,11 +271,8 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) if (!valid_port(port)) return -EINVAL; - if (!gpio_is_valid(pdata->vbus_pin[port])) - return -EINVAL; - - return gpio_get_value(pdata->vbus_pin[port]) ^ - pdata->vbus_pin_active_low[port]; + return gpiod_get_value(pdata->vbus_pin[port]) ^ + pdata->vbus_pin_active_low[port]; } /* @@ -468,16 +462,13 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) { struct platform_device *pdev = data; struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev); - int val, gpio, port; + int val, port; /* From the GPIO notifying the over-current situation, find * out the corresponding port */ at91_for_each_port(port) { - if (gpio_is_valid(pdata->overcurrent_pin[port]) && - gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { - gpio = pdata->overcurrent_pin[port]; + if (gpiod_to_irq(pdata->overcurrent_pin[port]) == irq) break; - } } if (port == AT91_MAX_USBH_PORTS) { @@ -485,7 +476,7 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) return IRQ_HANDLED; } - val = gpio_get_value(gpio); + val = gpiod_get_value(pdata->overcurrent_pin[port]); /* When notified of an over-current situation, disable power on the corresponding port, and mark this port in @@ -516,9 +507,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct at91_usbh_data *pdata; int i; - int gpio; int ret; - enum of_gpio_flags flags; + int err; u32 ports; /* Right now device-tree probed devices don't get dma_mask set. @@ -539,38 +529,16 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) pdata->ports = ports; at91_for_each_port(i) { - /* - * do not configure PIO if not in relation with - * real USB port on board - */ - if (i >= pdata->ports) { - pdata->vbus_pin[i] = -EINVAL; - pdata->overcurrent_pin[i] = -EINVAL; + pdata->vbus_pin[i] = devm_gpiod_get_optional(&pdev->dev, + "atmel,vbus-gpio", + GPIOD_IN); + if (IS_ERR(pdata->vbus_pin[i])) { + err = PTR_ERR(pdata->vbus_pin[i]); + dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err); continue; } - gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, - &flags); - pdata->vbus_pin[i] = gpio; - if (!gpio_is_valid(gpio)) - continue; - pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW; - - ret = gpio_request(gpio, "ohci_vbus"); - if (ret) { - dev_err(&pdev->dev, - "can't request vbus gpio %d\n", gpio); - continue; - } - ret = gpio_direction_output(gpio, - !pdata->vbus_pin_active_low[i]); - if (ret) { - dev_err(&pdev->dev, - "can't put vbus gpio %d as output %d\n", - gpio, !pdata->vbus_pin_active_low[i]); - gpio_free(gpio); - continue; - } + pdata->vbus_pin_active_low[i] = gpiod_get_value(pdata->vbus_pin[i]); ohci_at91_usb_set_power(pdata, i, 1); } @@ -580,37 +548,21 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) break; pdata->overcurrent_pin[i] = - of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); - - if (!gpio_is_valid(pdata->overcurrent_pin[i])) - continue; - gpio = pdata->overcurrent_pin[i]; - - ret = gpio_request(gpio, "ohci_overcurrent"); - if (ret) { - dev_err(&pdev->dev, - "can't request overcurrent gpio %d\n", - gpio); + devm_gpiod_get_optional(&pdev->dev, + "atmel,oc-gpio", GPIOD_IN); + if (IS_ERR(pdata->overcurrent_pin[i])) { + err = PTR_ERR(pdata->overcurrent_pin[i]); + dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err); continue; } - ret = gpio_direction_input(gpio); - if (ret) { - dev_err(&pdev->dev, - "can't configure overcurrent gpio %d as input\n", - gpio); - gpio_free(gpio); - continue; - } - - ret = request_irq(gpio_to_irq(gpio), - ohci_hcd_at91_overcurrent_irq, - IRQF_SHARED, "ohci_overcurrent", pdev); - if (ret) { - gpio_free(gpio); - dev_err(&pdev->dev, - "can't get gpio IRQ for overcurrent\n"); - } + ret = devm_request_irq(&pdev->dev, + gpiod_to_irq(pdata->overcurrent_pin[i]), + ohci_hcd_at91_overcurrent_irq, + IRQF_SHARED, + "ohci_overcurrent", pdev); + if (ret) + dev_info(&pdev->dev, "failed to request gpio \"overcurrent\" IRQ\n"); } device_init_wakeup(&pdev->dev, 1); @@ -623,19 +575,8 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) int i; if (pdata) { - at91_for_each_port(i) { - if (!gpio_is_valid(pdata->vbus_pin[i])) - continue; + at91_for_each_port(i) ohci_at91_usb_set_power(pdata, i, 0); - gpio_free(pdata->vbus_pin[i]); - } - - at91_for_each_port(i) { - if (!gpio_is_valid(pdata->overcurrent_pin[i])) - continue; - free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev); - gpio_free(pdata->overcurrent_pin[i]); - } } device_init_wakeup(&pdev->dev, 0);