diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt index 5aafe0b351a1..2aff0349facd 100644 --- a/Documentation/acpi/gpio-properties.txt +++ b/Documentation/acpi/gpio-properties.txt @@ -51,6 +51,68 @@ it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpios" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. +It is possible to leave holes in the array of GPIOs. This is useful in +cases like with SPI host controllers where some chip selects may be +implemented as GPIOs and some as native signals. For example a SPI host +controller can have chip selects 0 and 2 implemented as GPIOs and 1 as +native: + + Package () { + "cs-gpios", + Package () { + ^GPIO, 19, 0, 0, // chip select 0: GPIO + 0, // chip select 1: native signal + ^GPIO, 20, 0, 0, // chip select 2: GPIO + } + } + +Other supported properties +-------------------------- + +Following Device Tree compatible device properties are also supported by +_DSD device properties for GPIO controllers: + +- gpio-hog +- output-high +- output-low +- input +- line-name + +Example: + + Name (_DSD, Package () { + // _DSD Hierarchical Properties Extension UUID + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () {"hog-gpio8", "G8PU"} + } + }) + + Name (G8PU, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () {"gpio-hog", 1}, + Package () {"gpios", Package () {8, 0}}, + Package () {"output-high", 1}, + Package () {"line-name", "gpio8-pullup"}, + } + }) + +- gpio-line-names + +Example: + + Package () { + "gpio-line-names", + Package () { + "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD", "MUX7_IO", + "LVL_C_A1", "MUX0_IO", "SPI1_MISO" + } + } + +See Documentation/devicetree/bindings/gpio/gpio.txt for more information +about these properties. + ACPI GPIO Mappings Provided by Drivers -------------------------------------- diff --git a/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt b/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt deleted file mode 100644 index c809acb9c71b..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt +++ /dev/null @@ -1,41 +0,0 @@ -SEMTECH SX150x GPIO expander bindings - - -Required properties: - -- compatible: should be "semtech,sx1506q", - "semtech,sx1508q", - "semtech,sx1509q", - "semtech,sx1502q". - -- reg: The I2C slave address for this device. - -- interrupt-parent: phandle of the parent interrupt controller. - -- interrupts: Interrupt specifier for the controllers interrupt. - -- #gpio-cells: Should be 2. The first cell is the GPIO number and the - second cell is used to specify optional parameters: - bit 0: polarity (0: normal, 1: inverted) - -- gpio-controller: Marks the device as a GPIO controller. - -- interrupt-controller: Marks the device as a interrupt controller. - -The GPIO expander can optionally be used as an interrupt controller, in -which case it uses the default two cell specifier as described in -Documentation/devicetree/bindings/interrupt-controller/interrupts.txt. - -Example: - - i2c_gpio_expander@20{ - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "semtech,sx1506q"; - reg = <0x20>; - interrupt-parent = <&gpio_1>; - interrupts = <16 0>; - - gpio-controller; - interrupt-controller; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt new file mode 100644 index 000000000000..c293c8aaac73 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt @@ -0,0 +1,69 @@ +SEMTECH SX150x GPIO expander bindings + +Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and +../interrupt-controller/interrupts.txt for generic information regarding +pin controller, GPIO, and interrupt bindings. + +Required properties: +- compatible: should be one of : + "semtech,sx1506q", + "semtech,sx1508q", + "semtech,sx1509q", + "semtech,sx1502q". + +- reg: The I2C slave address for this device. + +- #gpio-cells: Should be 2. The first cell is the GPIO number and the + second cell is used to specify optional parameters: + bit 0: polarity (0: normal, 1: inverted) + +- gpio-controller: Marks the device as a GPIO controller. + +Optional properties : +- interrupt-parent: phandle of the parent interrupt controller. + +- interrupts: Interrupt specifier for the controllers interrupt. + +- interrupt-controller: Marks the device as a interrupt controller. + +- semtech,probe-reset: Will trigger a reset of the GPIO expander on probe, + only for sx1508q and sx1509q + +The GPIO expander can optionally be used as an interrupt controller, in +which case it uses the default two cell specifier. + +Required properties for pin configuration sub-nodes: + - pins: List of pins to which the configuration applies. + +Optional properties for pin configuration sub-nodes: +---------------------------------------------------- + - bias-disable: disable any pin bias, except the OSCIO pin + - bias-pull-up: pull up the pin, except the OSCIO pin + - bias-pull-down: pull down the pin, except the OSCIO pin + - bias-pull-pin-default: use pin-default pull state, except the OSCIO pin + - drive-push-pull: drive actively high and low + - drive-open-drain: drive with open drain only for sx1508q and sx1509q and except the OSCIO pin + - output-low: set the pin to output mode with low level + - output-high: set the pin to output mode with high level + +Example: + + i2c0gpio-expander@20{ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1506q"; + reg = <0x20>; + interrupt-parent = <&gpio_1>; + interrupts = <16 0>; + + gpio-controller; + interrupt-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_cfg_pins>; + + gpio1_cfg_pins: gpio1-cfg { + pins = "gpio1"; + bias-pull-up; + }; + }; diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt index 368d5a294d89..747c721776ed 100644 --- a/Documentation/gpio/driver.txt +++ b/Documentation/gpio/driver.txt @@ -175,8 +175,8 @@ The IRQ portions of the GPIO block are implemented using an irqchip, using the header . So basically such a driver is utilizing two sub- systems simultaneously: gpio and irq. -RT_FULL: GPIO driver should not use spinlock_t or any sleepable APIs -(like PM runtime) as part of its irq_chip implementation on -RT. +RT_FULL: a realtime compliant GPIO driver should not use spinlock_t or any +sleepable APIs (like PM runtime) as part of its irq_chip implementation. - spinlock_t should be replaced with raw_spinlock_t [1]. - If sleepable APIs have to be used, these can be done from the .irq_bus_lock() and .irq_bus_unlock() callbacks, as these are the only slowpath callbacks @@ -185,33 +185,32 @@ RT_FULL: GPIO driver should not use spinlock_t or any sleepable APIs GPIO irqchips usually fall in one of two categories: * CHAINED GPIO irqchips: these are usually the type that is embedded on - an SoC. This means that there is a fast IRQ handler for the GPIOs that + an SoC. This means that there is a fast IRQ flow handler for the GPIOs that gets called in a chain from the parent IRQ handler, most typically the - system interrupt controller. This means the GPIO irqchip is registered - using irq_set_chained_handler() or the corresponding - gpiochip_set_chained_irqchip() helper function, and the GPIO irqchip - handler will be called immediately from the parent irqchip, while - holding the IRQs disabled. The GPIO irqchip will then end up calling - something like this sequence in its interrupt handler: + system interrupt controller. This means that the GPIO irqchip handler will + be called immediately from the parent irqchip, while holding the IRQs + disabled. The GPIO irqchip will then end up calling something like this + sequence in its interrupt handler: - static irqreturn_t tc3589x_gpio_irq(int irq, void *data) + static irqreturn_t foo_gpio_irq(int irq, void *data) chained_irq_enter(...); generic_handle_irq(...); chained_irq_exit(...); Chained GPIO irqchips typically can NOT set the .can_sleep flag on - struct gpio_chip, as everything happens directly in the callbacks. + struct gpio_chip, as everything happens directly in the callbacks: no + slow bus traffic like I2C can be used. RT_FULL: Note, chained IRQ handlers will not be forced threaded on -RT. As result, spinlock_t or any sleepable APIs (like PM runtime) can't be used in chained IRQ handler. - if required (and if it can't be converted to the nested threaded GPIO irqchip) - - chained IRQ handler can be converted to generic irq handler and this way - it will be threaded IRQ handler on -RT and hard IRQ handler on non-RT + If required (and if it can't be converted to the nested threaded GPIO irqchip) + a chained IRQ handler can be converted to generic irq handler and this way + it will be a threaded IRQ handler on -RT and a hard IRQ handler on non-RT (for example, see [3]). Know W/A: The generic_handle_irq() is expected to be called with IRQ disabled, - so IRQ core will complain if it will be called from IRQ handler which is - forced thread. The "fake?" raw lock can be used to W/A this problem: + so the IRQ core will complain if it is called from an IRQ handler which is + forced to a thread. The "fake?" raw lock can be used to W/A this problem: raw_spinlock_t wa_lock; static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank) @@ -243,7 +242,7 @@ GPIO irqchips usually fall in one of two categories: by the driver. The hallmark of this driver is to call something like this in its interrupt handler: - static irqreturn_t tc3589x_gpio_irq(int irq, void *data) + static irqreturn_t foo_gpio_irq(int irq, void *data) ... handle_nested_irq(irq); @@ -256,23 +255,31 @@ associated irqdomain and resource allocation callbacks, the gpiolib has some helpers that can be enabled by selecting the GPIOLIB_IRQCHIP Kconfig symbol: -* gpiochip_irqchip_add(): adds an irqchip to a gpiochip. It will pass +* gpiochip_irqchip_add(): adds a chained irqchip to a gpiochip. It will pass the struct gpio_chip* for the chip to all IRQ callbacks, so the callbacks need to embed the gpio_chip in its state container and obtain a pointer to the container using container_of(). (See Documentation/driver-model/design-patterns.txt) - If there is a need to exclude certain GPIOs from the IRQ domain, one can - set .irq_need_valid_mask of the gpiochip before gpiochip_add_data() is - called. This allocates .irq_valid_mask with as many bits set as there are - GPIOs in the chip. Drivers can exclude GPIOs by clearing bits from this - mask. The mask must be filled in before gpiochip_irqchip_add() is called. +* gpiochip_irqchip_add_nested(): adds a nested irqchip to a gpiochip. + Apart from that it works exactly like the chained irqchip. * gpiochip_set_chained_irqchip(): sets up a chained irq handler for a gpio_chip from a parent IRQ and passes the struct gpio_chip* as handler data. (Notice handler data, since the irqchip data is likely used by the - parent irqchip!) This is for the chained type of chip. This is also used - to set up a nested irqchip if NULL is passed as handler. + parent irqchip!). + +* gpiochip_set_nested_irqchip(): sets up a nested irq handler for a + gpio_chip from a parent IRQ. As the parent IRQ has usually been + explicitly requested by the driver, this does very little more than + mark all the child IRQs as having the other IRQ as parent. + +If there is a need to exclude certain GPIOs from the IRQ domain, you can +set .irq_need_valid_mask of the gpiochip before gpiochip_add_data() is +called. This allocates an .irq_valid_mask with as many bits set as there +are GPIOs in the chip. Drivers can exclude GPIOs by clearing bits from this +mask. The mask must be filled in before gpiochip_irqchip_add() or +gpiochip_irqchip_add_nested() is called. To use the helpers please keep the following in mind: @@ -323,6 +330,9 @@ When implementing an irqchip inside a GPIO driver, these two functions should typically be called in the .startup() and .shutdown() callbacks from the irqchip. +When using the gpiolib irqchip helpers, these callback are automatically +assigned. + Real-Time compliance for GPIO IRQ chips --------------------------------------- diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index ed9a01484030..a109f6482413 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index ed37e5908b91..d5d36549ecc1 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -167,7 +167,7 @@ config GPIO_DWAPB config GPIO_EM tristate "Emma Mobile GPIO" - depends on ARM && OF_GPIO + depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO help Say yes here to support GPIO on Renesas Emma Mobile SoCs. @@ -451,7 +451,7 @@ config GPIO_VR41XX config GPIO_VX855 tristate "VIA VX855/VX875 GPIO" - depends on PCI + depends on (X86 || COMPILE_TEST) && PCI select MFD_CORE select MFD_VX855 help @@ -520,6 +520,7 @@ config GPIO_ZYNQ config GPIO_ZX bool "ZTE ZX GPIO support" + depends on ARCH_ZX || COMPILE_TEST select GPIOLIB_IRQCHIP help Say yes here to support the GPIO device on ZTE ZX SoCs. @@ -603,7 +604,7 @@ config GPIO_IT87 config GPIO_SCH tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" - depends on PCI + depends on (X86 || COMPILE_TEST) && PCI select MFD_CORE select LPC_SCH help @@ -777,16 +778,13 @@ config GPIO_PCF857X platform-neutral GPIO calls. config GPIO_SX150X - bool "Semtech SX150x I2C GPIO expander" - depends on I2C=y - select GPIOLIB_IRQCHIP + bool "Semtech SX150x I2C GPIO expander (deprecated)" + depends on PINCTRL && I2C=y + select PINCTRL_SX150X default n help - Say yes here to provide support for Semtech SX150-series I2C - GPIO expanders. Compatible models include: - - 8 bits: sx1508q - 16 bits: sx1509q + Say yes here to provide support for Semtech SX150x-series I2C + GPIO expanders. The GPIO driver was replaced by a Pinctrl version. config GPIO_TPIC2810 tristate "TPIC2810 8-Bit I2C GPO expander" @@ -798,6 +796,7 @@ config GPIO_TPIC2810 config GPIO_TS4900 tristate "Technologic Systems FPGA I2C GPIO" + depends on SOC_IMX6 || COMPILE_TEST select REGMAP_I2C help Say yes here to enabled the GPIO driver for Technologic's FPGA core. @@ -814,6 +813,14 @@ config GPIO_ADP5520 This option enables support for on-chip GPIO found on Analog Devices ADP5520 PMICs. +config GPIO_ALTERA_A10SR + tristate "Altera Arria10 System Resource GPIO" + depends on MFD_ALTERA_A10SR + help + Driver for Arria10 Development Kit GPIO expansion which + includes reads of pushbuttons and DIP switches as well + as writes to LEDs. + config GPIO_ARIZONA tristate "Wolfson Microelectronics Arizona class devices" depends on MFD_ARIZONA @@ -822,7 +829,7 @@ config GPIO_ARIZONA config GPIO_CRYSTAL_COVE tristate "GPIO support for Crystal Cove PMIC" - depends on INTEL_SOC_PMIC + depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC select GPIOLIB_IRQCHIP help Support for GPIO pins on Crystal Cove PMIC. @@ -835,6 +842,7 @@ config GPIO_CRYSTAL_COVE config GPIO_CS5535 tristate "AMD CS5535/CS5536 GPIO support" + depends on X86 || MIPS || COMPILE_TEST depends on MFD_CS5535 help The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that @@ -927,7 +935,7 @@ config GPIO_MAX77620 config GPIO_MSIC bool "Intel MSIC mixed signal gpio support" - depends on MFD_INTEL_MSIC + depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC help Enable support for GPIO on intel MSIC controllers found in intel MID devices @@ -1028,7 +1036,7 @@ config GPIO_UCB1400 config GPIO_WHISKEY_COVE tristate "GPIO support for Whiskey Cove PMIC" - depends on INTEL_SOC_PMIC + depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC select GPIOLIB_IRQCHIP help Support for GPIO pins on Whiskey Cove PMIC. @@ -1067,6 +1075,7 @@ menu "PCI GPIO expanders" config GPIO_AMD8111 tristate "AMD 8111 GPIO driver" + depends on X86 || COMPILE_TEST help The AMD 8111 south bridge contains 32 GPIO pins which can be used. @@ -1108,6 +1117,7 @@ config GPIO_MERRIFIELD config GPIO_ML_IOH tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" + depends on X86 || COMPILE_TEST select GENERIC_IRQ_CHIP help ML7213 is companion chip for Intel Atom E6xx series. diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index d074c2299393..a7676b82de6f 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG obj-$(CONFIG_GPIOLIB) += devres.o obj-$(CONFIG_GPIOLIB) += gpiolib.o obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o +obj-$(CONFIG_GPIOLIB) += gpiolib-devprop.o obj-$(CONFIG_OF_GPIO) += gpiolib-of.o obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o @@ -24,6 +25,7 @@ obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o +obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o @@ -102,7 +104,6 @@ obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o -obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o obj-$(CONFIG_GPIO_SYSCON) += gpio-syscon.o obj-$(CONFIG_GPIO_TB10X) += gpio-tb10x.o obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c index 8ff7b0d3eac6..89863ea25de1 100644 --- a/drivers/gpio/gpio-adnp.c +++ b/drivers/gpio/gpio-adnp.c @@ -468,17 +468,19 @@ static int adnp_irq_setup(struct adnp *adnp) return err; } - err = gpiochip_irqchip_add(chip, - &adnp_irq_chip, - 0, - handle_simple_irq, - IRQ_TYPE_NONE); + err = gpiochip_irqchip_add_nested(chip, + &adnp_irq_chip, + 0, + handle_simple_irq, + IRQ_TYPE_NONE); if (err) { dev_err(chip->parent, "could not connect irqchip to gpiochip\n"); return err; } + gpiochip_set_nested_irqchip(chip, &adnp_irq_chip, adnp->client->irq); + return 0; } diff --git a/drivers/gpio/gpio-altera-a10sr.c b/drivers/gpio/gpio-altera-a10sr.c new file mode 100644 index 000000000000..9e1a138fed53 --- /dev/null +++ b/drivers/gpio/gpio-altera-a10sr.c @@ -0,0 +1,130 @@ +/* + * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + * + * GPIO driver for Altera Arria10 MAX5 System Resource Chip + * + * Adapted from gpio-tps65910.c + */ + +#include +#include +#include + +/** + * struct altr_a10sr_gpio - Altera Max5 GPIO device private data structure + * @gp: : instance of the gpio_chip + * @regmap: the regmap from the parent device. + */ +struct altr_a10sr_gpio { + struct gpio_chip gp; + struct regmap *regmap; +}; + +static int altr_a10sr_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct altr_a10sr_gpio *gpio = gpiochip_get_data(chip); + int ret, val; + + ret = regmap_read(gpio->regmap, ALTR_A10SR_PBDSW_REG, &val); + if (ret < 0) + return ret; + + return !!(val & BIT(offset - ALTR_A10SR_LED_VALID_SHIFT)); +} + +static void altr_a10sr_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct altr_a10sr_gpio *gpio = gpiochip_get_data(chip); + + regmap_update_bits(gpio->regmap, ALTR_A10SR_LED_REG, + BIT(ALTR_A10SR_LED_VALID_SHIFT + offset), + value ? BIT(ALTR_A10SR_LED_VALID_SHIFT + offset) + : 0); +} + +static int altr_a10sr_gpio_direction_input(struct gpio_chip *gc, + unsigned int nr) +{ + if (nr >= (ALTR_A10SR_IN_VALID_RANGE_LO - ALTR_A10SR_LED_VALID_SHIFT)) + return 0; + return -EINVAL; +} + +static int altr_a10sr_gpio_direction_output(struct gpio_chip *gc, + unsigned int nr, int value) +{ + if (nr <= (ALTR_A10SR_OUT_VALID_RANGE_HI - ALTR_A10SR_LED_VALID_SHIFT)) + return 0; + return -EINVAL; +} + +static struct gpio_chip altr_a10sr_gc = { + .label = "altr_a10sr_gpio", + .owner = THIS_MODULE, + .get = altr_a10sr_gpio_get, + .set = altr_a10sr_gpio_set, + .direction_input = altr_a10sr_gpio_direction_input, + .direction_output = altr_a10sr_gpio_direction_output, + .can_sleep = true, + .ngpio = 12, + .base = -1, +}; + +static int altr_a10sr_gpio_probe(struct platform_device *pdev) +{ + struct altr_a10sr_gpio *gpio; + int ret; + struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent); + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->regmap = a10sr->regmap; + + gpio->gp = altr_a10sr_gc; + + gpio->gp.of_node = pdev->dev.of_node; + + ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, gpio); + + return 0; +} + +static const struct of_device_id altr_a10sr_gpio_of_match[] = { + { .compatible = "altr,a10sr-gpio" }, + { }, +}; +MODULE_DEVICE_TABLE(of, altr_a10sr_gpio_of_match); + +static struct platform_driver altr_a10sr_gpio_driver = { + .probe = altr_a10sr_gpio_probe, + .driver = { + .name = "altr_a10sr_gpio", + .of_match_table = of_match_ptr(altr_a10sr_gpio_of_match), + }, +}; +module_platform_driver(altr_a10sr_gpio_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Thor Thayer "); +MODULE_DESCRIPTION("Altera Arria10 System Resource Chip GPIO"); diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c index 482462889c8f..1f91557717a6 100644 --- a/drivers/gpio/gpio-arizona.c +++ b/drivers/gpio/gpio-arizona.c @@ -137,15 +137,10 @@ static int arizona_gpio_probe(struct platform_device *pdev) if (ret < 0) { dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); - goto err; + return ret; } - platform_set_drvdata(pdev, arizona_gpio); - - return ret; - -err: - return ret; + return 0; } static struct platform_driver arizona_gpio_driver = { diff --git a/drivers/gpio/gpio-axp209.c b/drivers/gpio/gpio-axp209.c index d9c2a517c6df..4a346b7b4172 100644 --- a/drivers/gpio/gpio-axp209.c +++ b/drivers/gpio/gpio-axp209.c @@ -64,13 +64,9 @@ static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset) { struct axp20x_gpio *gpio = gpiochip_get_data(chip); unsigned int val; - int reg, ret; + int ret; - reg = axp20x_gpio_get_reg(offset); - if (reg < 0) - return reg; - - ret = regmap_read(gpio->regmap, reg, &val); + ret = regmap_read(gpio->regmap, AXP20X_GPIO20_SS, &val); if (ret) return ret; diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c index 7c446d118cd6..2197368cc899 100644 --- a/drivers/gpio/gpio-crystalcove.c +++ b/drivers/gpio/gpio-crystalcove.c @@ -351,8 +351,8 @@ static int crystalcove_gpio_probe(struct platform_device *pdev) return retval; } - gpiochip_irqchip_add(&cg->chip, &crystalcove_irqchip, 0, - handle_simple_irq, IRQ_TYPE_NONE); + gpiochip_irqchip_add_nested(&cg->chip, &crystalcove_irqchip, 0, + handle_simple_irq, IRQ_TYPE_NONE); retval = request_threaded_irq(irq, NULL, crystalcove_gpio_irq_handler, IRQF_ONESHOT, KBUILD_MODNAME, cg); @@ -362,6 +362,8 @@ static int crystalcove_gpio_probe(struct platform_device *pdev) return retval; } + gpiochip_set_nested_irqchip(&cg->chip, &crystalcove_irqchip, irq); + return 0; } diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index dd262f00295d..9191056548fe 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -40,6 +40,7 @@ struct davinci_gpio_regs { typedef struct irq_chip *(*gpio_get_irq_chip_cb_t)(unsigned int irq); #define BINTEN 0x8 /* GPIO Interrupt Per-Bank Enable Register */ +#define MAX_LABEL_SIZE 20 static void __iomem *gpio_base; @@ -201,6 +202,7 @@ static int davinci_gpio_probe(struct platform_device *pdev) struct davinci_gpio_regs __iomem *regs; struct device *dev = &pdev->dev; struct resource *res; + char label[MAX_LABEL_SIZE]; pdata = davinci_gpio_get_pdata(pdev); if (!pdata) { @@ -237,7 +239,10 @@ static int davinci_gpio_probe(struct platform_device *pdev) return PTR_ERR(gpio_base); for (i = 0, base = 0; base < ngpio; i++, base += 32) { - chips[i].chip.label = "DaVinci"; + snprintf(label, MAX_LABEL_SIZE, "davinci_gpio.%d", i); + chips[i].chip.label = devm_kstrdup(dev, label, GFP_KERNEL); + if (!chips[i].chip.label) + return -ENOMEM; chips[i].chip.direction_input = davinci_direction_in; chips[i].chip.get = davinci_gpio_get; diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c index f7a60a441e95..5d38b08d1ee2 100644 --- a/drivers/gpio/gpio-dln2.c +++ b/drivers/gpio/gpio-dln2.c @@ -467,7 +467,6 @@ static int dln2_gpio_probe(struct platform_device *pdev) dln2->gpio.base = -1; dln2->gpio.ngpio = pins; dln2->gpio.can_sleep = true; - dln2->gpio.irq_not_threaded = true; dln2->gpio.set = dln2_gpio_set; dln2->gpio.get = dln2_gpio_get; dln2->gpio.request = dln2_gpio_request; diff --git a/drivers/gpio/gpio-etraxfs.c b/drivers/gpio/gpio-etraxfs.c index 00b022c9acb3..a254d5b07b94 100644 --- a/drivers/gpio/gpio-etraxfs.c +++ b/drivers/gpio/gpio-etraxfs.c @@ -471,9 +471,4 @@ static struct platform_driver etraxfs_gpio_driver = { .probe = etraxfs_gpio_probe, }; -static int __init etraxfs_gpio_init(void) -{ - return platform_driver_register(&etraxfs_gpio_driver); -} - -device_initcall(etraxfs_gpio_init); +builtin_platform_driver(etraxfs_gpio_driver); diff --git a/drivers/gpio/gpio-htc-egpio.c b/drivers/gpio/gpio-htc-egpio.c index 0b4df6051097..271356effb2e 100644 --- a/drivers/gpio/gpio-htc-egpio.c +++ b/drivers/gpio/gpio-htc-egpio.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include struct egpio_chip { int reg_start; @@ -160,10 +160,14 @@ static int egpio_get(struct gpio_chip *chip, unsigned offset) bit = egpio_bit(ei, offset); reg = egpio->reg_start + egpio_pos(ei, offset); - value = egpio_readw(ei, reg); - pr_debug("readw(%p + %x) = %x\n", - ei->base_addr, reg << ei->bus_shift, value); - return !!(value & bit); + if (test_bit(offset, &egpio->is_out)) { + return !!(egpio->cached_values & (1 << offset)); + } else { + value = egpio_readw(ei, reg); + pr_debug("readw(%p + %x) = %x\n", + ei->base_addr, reg << ei->bus_shift, value); + return !!(value & bit); + } } static int egpio_direction_input(struct gpio_chip *chip, unsigned offset) @@ -225,6 +229,15 @@ static int egpio_direction_output(struct gpio_chip *chip, } } +static int egpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct egpio_chip *egpio; + + egpio = gpiochip_get_data(chip); + + return !test_bit(offset, &egpio->is_out); +} + static void egpio_write_cache(struct egpio_info *ei) { int i; @@ -327,6 +340,7 @@ static int __init egpio_probe(struct platform_device *pdev) chip->set = egpio_set; chip->direction_input = egpio_direction_input; chip->direction_output = egpio_direction_output; + chip->get_direction = egpio_get_direction; chip->base = pdata->chip[i].gpio_base; chip->ngpio = pdata->chip[i].num_gpios; @@ -367,24 +381,6 @@ static int __init egpio_probe(struct platform_device *pdev) return ret; } -static int __exit egpio_remove(struct platform_device *pdev) -{ - struct egpio_info *ei = platform_get_drvdata(pdev); - unsigned int irq, irq_end; - - if (ei->chained_irq) { - irq_end = ei->irq_start + ei->nirqs; - for (irq = ei->irq_start; irq < irq_end; irq++) { - irq_set_chip_and_handler(irq, NULL, NULL); - irq_set_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); - } - irq_set_chained_handler(ei->chained_irq, NULL); - device_init_wakeup(&pdev->dev, 0); - } - - return 0; -} - #ifdef CONFIG_PM static int egpio_suspend(struct platform_device *pdev, pm_message_t state) { @@ -416,8 +412,8 @@ static int egpio_resume(struct platform_device *pdev) static struct platform_driver egpio_driver = { .driver = { .name = "htc-egpio", + .suppress_bind_attrs = true, }, - .remove = __exit_p(egpio_remove), .suspend = egpio_suspend, .resume = egpio_resume, }; @@ -426,15 +422,5 @@ static int __init egpio_init(void) { return platform_driver_probe(&egpio_driver, egpio_probe); } - -static void __exit egpio_exit(void) -{ - platform_driver_unregister(&egpio_driver); -} - /* start early for dependencies */ subsys_initcall(egpio_init); -module_exit(egpio_exit) - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Kevin O'Connor "); diff --git a/drivers/gpio/gpio-intel-mid.c b/drivers/gpio/gpio-intel-mid.c index 164de64b11fc..a1e44c221f66 100644 --- a/drivers/gpio/gpio-intel-mid.c +++ b/drivers/gpio/gpio-intel-mid.c @@ -421,9 +421,4 @@ static struct pci_driver intel_gpio_driver = { }, }; -static int __init intel_gpio_init(void) -{ - return pci_register_driver(&intel_gpio_driver); -} - -device_initcall(intel_gpio_init); +builtin_pci_driver(intel_gpio_driver); diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c index a9aaf9d822b4..4ea4c6a1313b 100644 --- a/drivers/gpio/gpio-max732x.c +++ b/drivers/gpio/gpio-max732x.c @@ -520,20 +520,19 @@ static int max732x_irq_setup(struct max732x_chip *chip, client->irq); return ret; } - ret = gpiochip_irqchip_add(&chip->gpio_chip, - &max732x_irq_chip, - irq_base, - handle_simple_irq, - IRQ_TYPE_NONE); + ret = gpiochip_irqchip_add_nested(&chip->gpio_chip, + &max732x_irq_chip, + irq_base, + handle_simple_irq, + IRQ_TYPE_NONE); if (ret) { dev_err(&client->dev, "could not connect irqchip to gpiochip\n"); return ret; } - gpiochip_set_chained_irqchip(&chip->gpio_chip, - &max732x_irq_chip, - client->irq, - NULL); + gpiochip_set_nested_irqchip(&chip->gpio_chip, + &max732x_irq_chip, + client->irq); } return 0; diff --git a/drivers/gpio/gpio-max77620.c b/drivers/gpio/gpio-max77620.c index b46b436cb97f..ec8de4190db9 100644 --- a/drivers/gpio/gpio-max77620.c +++ b/drivers/gpio/gpio-max77620.c @@ -21,9 +21,6 @@ struct max77620_gpio { struct gpio_chip gpio_chip; struct regmap *rmap; struct device *dev; - int gpio_irq; - int irq_base; - int gpio_base; }; static const struct regmap_irq max77620_gpio_irqs[] = { @@ -254,7 +251,6 @@ static int max77620_gpio_probe(struct platform_device *pdev) mgpio->rmap = chip->rmap; mgpio->dev = &pdev->dev; - mgpio->gpio_irq = gpio_irq; mgpio->gpio_chip.label = pdev->name; mgpio->gpio_chip.parent = &pdev->dev; @@ -268,7 +264,6 @@ static int max77620_gpio_probe(struct platform_device *pdev) mgpio->gpio_chip.ngpio = MAX77620_GPIO_NR; mgpio->gpio_chip.can_sleep = 1; mgpio->gpio_chip.base = -1; - mgpio->irq_base = -1; #ifdef CONFIG_OF_GPIO mgpio->gpio_chip.of_node = pdev->dev.parent->of_node; #endif @@ -281,9 +276,8 @@ static int max77620_gpio_probe(struct platform_device *pdev) return ret; } - mgpio->gpio_base = mgpio->gpio_chip.base; - ret = devm_regmap_add_irq_chip(&pdev->dev, chip->rmap, mgpio->gpio_irq, - IRQF_ONESHOT, mgpio->irq_base, + ret = devm_regmap_add_irq_chip(&pdev->dev, chip->rmap, gpio_irq, + IRQF_ONESHOT, -1, &max77620_gpio_irq_chip, &chip->gpio_irq_data); if (ret < 0) { @@ -296,6 +290,7 @@ static int max77620_gpio_probe(struct platform_device *pdev) static const struct platform_device_id max77620_gpio_devtype[] = { { .name = "max77620-gpio", }, + { .name = "max20024-gpio", }, {}, }; MODULE_DEVICE_TABLE(platform, max77620_gpio_devtype); diff --git a/drivers/gpio/gpio-mb86s7x.c b/drivers/gpio/gpio-mb86s7x.c index d55af50e7034..ffb73f688ae1 100644 --- a/drivers/gpio/gpio-mb86s7x.c +++ b/drivers/gpio/gpio-mb86s7x.c @@ -217,8 +217,4 @@ static struct platform_driver mb86s70_gpio_driver = { .remove = mb86s70_gpio_remove, }; -static int __init mb86s70_gpio_init(void) -{ - return platform_driver_register(&mb86s70_gpio_driver); -} -device_initcall(mb86s70_gpio_init); +builtin_platform_driver(mb86s70_gpio_driver); diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index 99d37b56c258..504550665091 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -473,21 +473,20 @@ static int mcp23s08_irq_setup(struct mcp23s08 *mcp) return err; } - err = gpiochip_irqchip_add(chip, - &mcp23s08_irq_chip, - 0, - handle_simple_irq, - IRQ_TYPE_NONE); + err = gpiochip_irqchip_add_nested(chip, + &mcp23s08_irq_chip, + 0, + handle_simple_irq, + IRQ_TYPE_NONE); if (err) { dev_err(chip->parent, "could not connect irqchip to gpiochip: %d\n", err); return err; } - gpiochip_set_chained_irqchip(chip, - &mcp23s08_irq_chip, - mcp->irq, - NULL); + gpiochip_set_nested_irqchip(chip, + &mcp23s08_irq_chip, + mcp->irq); return 0; } diff --git a/drivers/gpio/gpio-merrifield.c b/drivers/gpio/gpio-merrifield.c index 45b51278b8ee..69e0f4ace465 100644 --- a/drivers/gpio/gpio-merrifield.c +++ b/drivers/gpio/gpio-merrifield.c @@ -11,6 +11,7 @@ #include #include +#include #include #include #include @@ -161,6 +162,34 @@ static int mrfld_gpio_direction_output(struct gpio_chip *chip, return 0; } +static int mrfld_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + void __iomem *gpdr = gpio_reg(chip, offset, GPDR); + + return (readl(gpdr) & BIT(offset % 32)) ? GPIOF_DIR_OUT : GPIOF_DIR_IN; +} + +static int mrfld_gpio_set_debounce(struct gpio_chip *chip, unsigned int offset, + unsigned int debounce) +{ + struct mrfld_gpio *priv = gpiochip_get_data(chip); + void __iomem *gfbr = gpio_reg(chip, offset, GFBR); + unsigned long flags; + u32 value; + + raw_spin_lock_irqsave(&priv->lock, flags); + + if (debounce) + value = readl(gfbr) & ~BIT(offset % 32); + else + value = readl(gfbr) | BIT(offset % 32); + writel(value, gfbr); + + raw_spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + static void mrfld_irq_ack(struct irq_data *d) { struct mrfld_gpio *priv = irq_data_get_irq_chip_data(d); @@ -384,6 +413,8 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id priv->chip.direction_output = mrfld_gpio_direction_output; priv->chip.get = mrfld_gpio_get; priv->chip.set = mrfld_gpio_set; + priv->chip.get_direction = mrfld_gpio_get_direction; + priv->chip.set_debounce = mrfld_gpio_set_debounce; priv->chip.base = gpio_base; priv->chip.ngpio = MRFLD_NGPIO; priv->chip.can_sleep = false; @@ -411,7 +442,7 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id } retval = gpiochip_irqchip_add(&priv->chip, &mrfld_irqchip, irq_base, - handle_simple_irq, IRQ_TYPE_NONE); + handle_bad_irq, IRQ_TYPE_NONE); if (retval) { dev_err(&pdev->dev, "could not connect irqchip to gpiochip\n"); return retval; diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c index ee1724806f46..1e8fde8cb803 100644 --- a/drivers/gpio/gpio-mxs.c +++ b/drivers/gpio/gpio-mxs.c @@ -87,10 +87,15 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) u32 val; u32 pin_mask = 1 << d->hwirq; struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = irq_data_get_chip_type(d); struct mxs_gpio_port *port = gc->private; void __iomem *pin_addr; int edge; + if (!(ct->type & type)) + if (irq_setup_alt_chip(d, type)) + return -EINVAL; + port->both_edges &= ~pin_mask; switch (type) { case IRQ_TYPE_EDGE_BOTH: @@ -119,10 +124,13 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) /* set level or edge */ pin_addr = port->base + PINCTRL_IRQLEV(port); - if (edge & GPIO_INT_LEV_MASK) + if (edge & GPIO_INT_LEV_MASK) { writel(pin_mask, pin_addr + MXS_SET); - else + writel(pin_mask, port->base + PINCTRL_IRQEN(port) + MXS_SET); + } else { writel(pin_mask, pin_addr + MXS_CLR); + writel(pin_mask, port->base + PINCTRL_PIN2IRQ(port) + MXS_SET); + } /* set polarity */ pin_addr = port->base + PINCTRL_IRQPOL(port); @@ -202,21 +210,37 @@ static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base) struct irq_chip_generic *gc; struct irq_chip_type *ct; - gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base, + gc = irq_alloc_generic_chip("gpio-mxs", 2, irq_base, port->base, handle_level_irq); if (!gc) return -ENOMEM; gc->private = port; - ct = gc->chip_types; + ct = &gc->chip_types[0]; + ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; ct->chip.irq_ack = irq_gc_ack_set_bit; - ct->chip.irq_mask = irq_gc_mask_clr_bit; - ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; ct->chip.irq_set_type = mxs_gpio_set_irq_type; ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; + ct->chip.flags = IRQCHIP_SET_TYPE_MASKED; ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; - ct->regs.mask = PINCTRL_IRQEN(port); + ct->regs.enable = PINCTRL_PIN2IRQ(port) + MXS_SET; + ct->regs.disable = PINCTRL_PIN2IRQ(port) + MXS_CLR; + + ct = &gc->chip_types[1]; + ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.irq_set_type = mxs_gpio_set_irq_type; + ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; + ct->chip.flags = IRQCHIP_SET_TYPE_MASKED; + ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; + ct->regs.enable = PINCTRL_IRQEN(port) + MXS_SET; + ct->regs.disable = PINCTRL_IRQEN(port) + MXS_CLR; + ct->handler = handle_level_irq; irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK, IRQ_NOREQUEST, 0); @@ -297,11 +321,8 @@ static int mxs_gpio_probe(struct platform_device *pdev) } port->base = base; - /* - * select the pin interrupt functionality but initially - * disable the interrupts - */ - writel(~0U, port->base + PINCTRL_PIN2IRQ(port)); + /* initially disable the interrupts */ + writel(0, port->base + PINCTRL_PIN2IRQ(port)); writel(0, port->base + PINCTRL_IRQEN(port)); /* clear address has to be used to clear IRQSTAT bits */ diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index fe731f094257..d5d72d84b719 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -74,6 +74,7 @@ static const struct i2c_device_id pca953x_id[] = { { "max7312", 16 | PCA953X_TYPE | PCA_INT, }, { "max7313", 16 | PCA953X_TYPE | PCA_INT, }, { "max7315", 8 | PCA953X_TYPE | PCA_INT, }, + { "max7318", 16 | PCA953X_TYPE | PCA_INT, }, { "pca6107", 8 | PCA953X_TYPE | PCA_INT, }, { "tca6408", 8 | PCA953X_TYPE | PCA_INT, }, { "tca6416", 16 | PCA953X_TYPE | PCA_INT, }, @@ -635,20 +636,20 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, return ret; } - ret = gpiochip_irqchip_add(&chip->gpio_chip, - &pca953x_irq_chip, - irq_base, - handle_simple_irq, - IRQ_TYPE_NONE); + ret = gpiochip_irqchip_add_nested(&chip->gpio_chip, + &pca953x_irq_chip, + irq_base, + handle_simple_irq, + IRQ_TYPE_NONE); if (ret) { dev_err(&client->dev, "could not connect irqchip to gpiochip\n"); return ret; } - gpiochip_set_chained_irqchip(&chip->gpio_chip, - &pca953x_irq_chip, - client->irq, NULL); + gpiochip_set_nested_irqchip(&chip->gpio_chip, + &pca953x_irq_chip, + client->irq); } return 0; @@ -907,6 +908,7 @@ static const struct of_device_id pca953x_dt_ids[] = { { .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), }, { .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), }, { .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), }, + { .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), }, { .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), }, { .compatible = "ti,pca9536", .data = OF_953X( 4, 0), }, diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c index d168410e2338..895af42a4513 100644 --- a/drivers/gpio/gpio-pcf857x.c +++ b/drivers/gpio/gpio-pcf857x.c @@ -378,9 +378,10 @@ static int pcf857x_probe(struct i2c_client *client, /* Enable irqchip if we have an interrupt */ if (client->irq) { - status = gpiochip_irqchip_add(&gpio->chip, &pcf857x_irq_chip, - 0, handle_level_irq, - IRQ_TYPE_NONE); + status = gpiochip_irqchip_add_nested(&gpio->chip, + &pcf857x_irq_chip, + 0, handle_level_irq, + IRQ_TYPE_NONE); if (status) { dev_err(&client->dev, "cannot add irqchip\n"); goto fail; @@ -393,8 +394,8 @@ static int pcf857x_probe(struct i2c_client *client, if (status) goto fail; - gpiochip_set_chained_irqchip(&gpio->chip, &pcf857x_irq_chip, - client->irq, NULL); + gpiochip_set_nested_irqchip(&gpio->chip, &pcf857x_irq_chip, + client->irq); gpio->irq_parent = client->irq; } diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index 6e3c1430616f..0a6bfd2b06e5 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -50,11 +49,12 @@ struct pl061_context_save_regs { }; #endif -struct pl061_gpio { +struct pl061 { spinlock_t lock; void __iomem *base; struct gpio_chip gc; + int parent_irq; #ifdef CONFIG_PM struct pl061_context_save_regs csave_regs; @@ -63,22 +63,22 @@ struct pl061_gpio { static int pl061_get_direction(struct gpio_chip *gc, unsigned offset) { - struct pl061_gpio *chip = gpiochip_get_data(gc); + struct pl061 *pl061 = gpiochip_get_data(gc); - return !(readb(chip->base + GPIODIR) & BIT(offset)); + return !(readb(pl061->base + GPIODIR) & BIT(offset)); } static int pl061_direction_input(struct gpio_chip *gc, unsigned offset) { - struct pl061_gpio *chip = gpiochip_get_data(gc); + struct pl061 *pl061 = gpiochip_get_data(gc); unsigned long flags; unsigned char gpiodir; - spin_lock_irqsave(&chip->lock, flags); - gpiodir = readb(chip->base + GPIODIR); + spin_lock_irqsave(&pl061->lock, flags); + gpiodir = readb(pl061->base + GPIODIR); gpiodir &= ~(BIT(offset)); - writeb(gpiodir, chip->base + GPIODIR); - spin_unlock_irqrestore(&chip->lock, flags); + writeb(gpiodir, pl061->base + GPIODIR); + spin_unlock_irqrestore(&pl061->lock, flags); return 0; } @@ -86,44 +86,44 @@ static int pl061_direction_input(struct gpio_chip *gc, unsigned offset) static int pl061_direction_output(struct gpio_chip *gc, unsigned offset, int value) { - struct pl061_gpio *chip = gpiochip_get_data(gc); + struct pl061 *pl061 = gpiochip_get_data(gc); unsigned long flags; unsigned char gpiodir; - spin_lock_irqsave(&chip->lock, flags); - writeb(!!value << offset, chip->base + (BIT(offset + 2))); - gpiodir = readb(chip->base + GPIODIR); + spin_lock_irqsave(&pl061->lock, flags); + writeb(!!value << offset, pl061->base + (BIT(offset + 2))); + gpiodir = readb(pl061->base + GPIODIR); gpiodir |= BIT(offset); - writeb(gpiodir, chip->base + GPIODIR); + writeb(gpiodir, pl061->base + GPIODIR); /* * gpio value is set again, because pl061 doesn't allow to set value of * a gpio pin before configuring it in OUT mode. */ - writeb(!!value << offset, chip->base + (BIT(offset + 2))); - spin_unlock_irqrestore(&chip->lock, flags); + writeb(!!value << offset, pl061->base + (BIT(offset + 2))); + spin_unlock_irqrestore(&pl061->lock, flags); return 0; } static int pl061_get_value(struct gpio_chip *gc, unsigned offset) { - struct pl061_gpio *chip = gpiochip_get_data(gc); + struct pl061 *pl061 = gpiochip_get_data(gc); - return !!readb(chip->base + (BIT(offset + 2))); + return !!readb(pl061->base + (BIT(offset + 2))); } static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value) { - struct pl061_gpio *chip = gpiochip_get_data(gc); + struct pl061 *pl061 = gpiochip_get_data(gc); - writeb(!!value << offset, chip->base + (BIT(offset + 2))); + writeb(!!value << offset, pl061->base + (BIT(offset + 2))); } static int pl061_irq_type(struct irq_data *d, unsigned trigger) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct pl061_gpio *chip = gpiochip_get_data(gc); + struct pl061 *pl061 = gpiochip_get_data(gc); int offset = irqd_to_hwirq(d); unsigned long flags; u8 gpiois, gpioibe, gpioiev; @@ -143,11 +143,11 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger) } - spin_lock_irqsave(&chip->lock, flags); + spin_lock_irqsave(&pl061->lock, flags); - gpioiev = readb(chip->base + GPIOIEV); - gpiois = readb(chip->base + GPIOIS); - gpioibe = readb(chip->base + GPIOIBE); + gpioiev = readb(pl061->base + GPIOIEV); + gpiois = readb(pl061->base + GPIOIS); + gpioibe = readb(pl061->base + GPIOIBE); if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { bool polarity = trigger & IRQ_TYPE_LEVEL_HIGH; @@ -199,11 +199,11 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger) offset); } - writeb(gpiois, chip->base + GPIOIS); - writeb(gpioibe, chip->base + GPIOIBE); - writeb(gpioiev, chip->base + GPIOIEV); + writeb(gpiois, pl061->base + GPIOIS); + writeb(gpioibe, pl061->base + GPIOIBE); + writeb(gpioiev, pl061->base + GPIOIEV); - spin_unlock_irqrestore(&chip->lock, flags); + spin_unlock_irqrestore(&pl061->lock, flags); return 0; } @@ -213,12 +213,12 @@ static void pl061_irq_handler(struct irq_desc *desc) unsigned long pending; int offset; struct gpio_chip *gc = irq_desc_get_handler_data(desc); - struct pl061_gpio *chip = gpiochip_get_data(gc); + struct pl061 *pl061 = gpiochip_get_data(gc); struct irq_chip *irqchip = irq_desc_get_chip(desc); chained_irq_enter(irqchip, desc); - pending = readb(chip->base + GPIOMIS); + pending = readb(pl061->base + GPIOMIS); if (pending) { for_each_set_bit(offset, &pending, PL061_GPIO_NR) generic_handle_irq(irq_find_mapping(gc->irqdomain, @@ -231,27 +231,27 @@ static void pl061_irq_handler(struct irq_desc *desc) static void pl061_irq_mask(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct pl061_gpio *chip = gpiochip_get_data(gc); + struct pl061 *pl061 = gpiochip_get_data(gc); u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR); u8 gpioie; - spin_lock(&chip->lock); - gpioie = readb(chip->base + GPIOIE) & ~mask; - writeb(gpioie, chip->base + GPIOIE); - spin_unlock(&chip->lock); + spin_lock(&pl061->lock); + gpioie = readb(pl061->base + GPIOIE) & ~mask; + writeb(gpioie, pl061->base + GPIOIE); + spin_unlock(&pl061->lock); } static void pl061_irq_unmask(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct pl061_gpio *chip = gpiochip_get_data(gc); + struct pl061 *pl061 = gpiochip_get_data(gc); u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR); u8 gpioie; - spin_lock(&chip->lock); - gpioie = readb(chip->base + GPIOIE) | mask; - writeb(gpioie, chip->base + GPIOIE); - spin_unlock(&chip->lock); + spin_lock(&pl061->lock); + gpioie = readb(pl061->base + GPIOIE) | mask; + writeb(gpioie, pl061->base + GPIOIE); + spin_unlock(&pl061->lock); } /** @@ -265,19 +265,20 @@ static void pl061_irq_unmask(struct irq_data *d) static void pl061_irq_ack(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct pl061_gpio *chip = gpiochip_get_data(gc); + struct pl061 *pl061 = gpiochip_get_data(gc); u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR); - spin_lock(&chip->lock); - writeb(mask, chip->base + GPIOIC); - spin_unlock(&chip->lock); + spin_lock(&pl061->lock); + writeb(mask, pl061->base + GPIOIC); + spin_unlock(&pl061->lock); } static int pl061_irq_set_wake(struct irq_data *d, unsigned int state) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct pl061 *pl061 = gpiochip_get_data(gc); - return irq_set_irq_wake(gc->irq_parent, state); + return irq_set_irq_wake(pl061->parent_irq, state); } static struct irq_chip pl061_irqchip = { @@ -292,81 +293,60 @@ static struct irq_chip pl061_irqchip = { static int pl061_probe(struct amba_device *adev, const struct amba_id *id) { struct device *dev = &adev->dev; - struct pl061_platform_data *pdata = dev_get_platdata(dev); - struct pl061_gpio *chip; - int ret, irq, i, irq_base; + struct pl061 *pl061; + int ret, irq; - chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); - if (chip == NULL) + pl061 = devm_kzalloc(dev, sizeof(*pl061), GFP_KERNEL); + if (pl061 == NULL) return -ENOMEM; - if (pdata) { - chip->gc.base = pdata->gpio_base; - irq_base = pdata->irq_base; - if (irq_base <= 0) { - dev_err(&adev->dev, "invalid IRQ base in pdata\n"); - return -ENODEV; - } - } else { - chip->gc.base = -1; - irq_base = 0; - } + pl061->base = devm_ioremap_resource(dev, &adev->res); + if (IS_ERR(pl061->base)) + return PTR_ERR(pl061->base); - chip->base = devm_ioremap_resource(dev, &adev->res); - if (IS_ERR(chip->base)) - return PTR_ERR(chip->base); - - spin_lock_init(&chip->lock); + spin_lock_init(&pl061->lock); if (of_property_read_bool(dev->of_node, "gpio-ranges")) { - chip->gc.request = gpiochip_generic_request; - chip->gc.free = gpiochip_generic_free; + pl061->gc.request = gpiochip_generic_request; + pl061->gc.free = gpiochip_generic_free; } - chip->gc.get_direction = pl061_get_direction; - chip->gc.direction_input = pl061_direction_input; - chip->gc.direction_output = pl061_direction_output; - chip->gc.get = pl061_get_value; - chip->gc.set = pl061_set_value; - chip->gc.ngpio = PL061_GPIO_NR; - chip->gc.label = dev_name(dev); - chip->gc.parent = dev; - chip->gc.owner = THIS_MODULE; + pl061->gc.base = -1; + pl061->gc.get_direction = pl061_get_direction; + pl061->gc.direction_input = pl061_direction_input; + pl061->gc.direction_output = pl061_direction_output; + pl061->gc.get = pl061_get_value; + pl061->gc.set = pl061_set_value; + pl061->gc.ngpio = PL061_GPIO_NR; + pl061->gc.label = dev_name(dev); + pl061->gc.parent = dev; + pl061->gc.owner = THIS_MODULE; - ret = gpiochip_add_data(&chip->gc, chip); + ret = gpiochip_add_data(&pl061->gc, pl061); if (ret) return ret; /* * irq_chip support */ - writeb(0, chip->base + GPIOIE); /* disable irqs */ + writeb(0, pl061->base + GPIOIE); /* disable irqs */ irq = adev->irq[0]; if (irq < 0) { dev_err(&adev->dev, "invalid IRQ\n"); return -ENODEV; } + pl061->parent_irq = irq; - ret = gpiochip_irqchip_add(&chip->gc, &pl061_irqchip, - irq_base, handle_bad_irq, + ret = gpiochip_irqchip_add(&pl061->gc, &pl061_irqchip, + 0, handle_bad_irq, IRQ_TYPE_NONE); if (ret) { dev_info(&adev->dev, "could not add irqchip\n"); return ret; } - gpiochip_set_chained_irqchip(&chip->gc, &pl061_irqchip, + gpiochip_set_chained_irqchip(&pl061->gc, &pl061_irqchip, irq, pl061_irq_handler); - for (i = 0; i < PL061_GPIO_NR; i++) { - if (pdata) { - if (pdata->directions & (BIT(i))) - pl061_direction_output(&chip->gc, i, - pdata->values & (BIT(i))); - else - pl061_direction_input(&chip->gc, i); - } - } - - amba_set_drvdata(adev, chip); + amba_set_drvdata(adev, pl061); dev_info(&adev->dev, "PL061 GPIO chip @%pa registered\n", &adev->res.start); @@ -376,20 +356,20 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id) #ifdef CONFIG_PM static int pl061_suspend(struct device *dev) { - struct pl061_gpio *chip = dev_get_drvdata(dev); + struct pl061 *pl061 = dev_get_drvdata(dev); int offset; - chip->csave_regs.gpio_data = 0; - chip->csave_regs.gpio_dir = readb(chip->base + GPIODIR); - chip->csave_regs.gpio_is = readb(chip->base + GPIOIS); - chip->csave_regs.gpio_ibe = readb(chip->base + GPIOIBE); - chip->csave_regs.gpio_iev = readb(chip->base + GPIOIEV); - chip->csave_regs.gpio_ie = readb(chip->base + GPIOIE); + pl061->csave_regs.gpio_data = 0; + pl061->csave_regs.gpio_dir = readb(pl061->base + GPIODIR); + pl061->csave_regs.gpio_is = readb(pl061->base + GPIOIS); + pl061->csave_regs.gpio_ibe = readb(pl061->base + GPIOIBE); + pl061->csave_regs.gpio_iev = readb(pl061->base + GPIOIEV); + pl061->csave_regs.gpio_ie = readb(pl061->base + GPIOIE); for (offset = 0; offset < PL061_GPIO_NR; offset++) { - if (chip->csave_regs.gpio_dir & (BIT(offset))) - chip->csave_regs.gpio_data |= - pl061_get_value(&chip->gc, offset) << offset; + if (pl061->csave_regs.gpio_dir & (BIT(offset))) + pl061->csave_regs.gpio_data |= + pl061_get_value(&pl061->gc, offset) << offset; } return 0; @@ -397,22 +377,22 @@ static int pl061_suspend(struct device *dev) static int pl061_resume(struct device *dev) { - struct pl061_gpio *chip = dev_get_drvdata(dev); + struct pl061 *pl061 = dev_get_drvdata(dev); int offset; for (offset = 0; offset < PL061_GPIO_NR; offset++) { - if (chip->csave_regs.gpio_dir & (BIT(offset))) - pl061_direction_output(&chip->gc, offset, - chip->csave_regs.gpio_data & + if (pl061->csave_regs.gpio_dir & (BIT(offset))) + pl061_direction_output(&pl061->gc, offset, + pl061->csave_regs.gpio_data & (BIT(offset))); else - pl061_direction_input(&chip->gc, offset); + pl061_direction_input(&pl061->gc, offset); } - writeb(chip->csave_regs.gpio_is, chip->base + GPIOIS); - writeb(chip->csave_regs.gpio_ibe, chip->base + GPIOIBE); - writeb(chip->csave_regs.gpio_iev, chip->base + GPIOIEV); - writeb(chip->csave_regs.gpio_ie, chip->base + GPIOIE); + writeb(pl061->csave_regs.gpio_is, pl061->base + GPIOIS); + writeb(pl061->csave_regs.gpio_ibe, pl061->base + GPIOIBE); + writeb(pl061->csave_regs.gpio_iev, pl061->base + GPIOIEV); + writeb(pl061->csave_regs.gpio_ie, pl061->base + GPIOIE); return 0; } diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c index 5b0042776ec7..16cbc5702865 100644 --- a/drivers/gpio/gpio-stmpe.c +++ b/drivers/gpio/gpio-stmpe.c @@ -413,7 +413,7 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev) stmpe->partnum != STMPE1801) { stmpe_reg_write(stmpe, statmsbreg + i, status[i]); stmpe_reg_write(stmpe, - stmpe->regs[STMPE_IDX_GPEDR_LSB + i], + stmpe->regs[STMPE_IDX_GPEDR_MSB] + i, status[i]); } } @@ -484,21 +484,20 @@ static int stmpe_gpio_probe(struct platform_device *pdev) if (stmpe_gpio->norequest_mask & BIT(i)) clear_bit(i, stmpe_gpio->chip.irq_valid_mask); } - ret = gpiochip_irqchip_add(&stmpe_gpio->chip, - &stmpe_gpio_irq_chip, - 0, - handle_simple_irq, - IRQ_TYPE_NONE); + ret = gpiochip_irqchip_add_nested(&stmpe_gpio->chip, + &stmpe_gpio_irq_chip, + 0, + handle_simple_irq, + IRQ_TYPE_NONE); if (ret) { dev_err(&pdev->dev, "could not connect irqchip to gpiochip\n"); goto out_disable; } - gpiochip_set_chained_irqchip(&stmpe_gpio->chip, - &stmpe_gpio_irq_chip, - irq, - NULL); + gpiochip_set_nested_irqchip(&stmpe_gpio->chip, + &stmpe_gpio_irq_chip, + irq); } platform_set_drvdata(pdev, stmpe_gpio); diff --git a/drivers/gpio/gpio-sx150x.c b/drivers/gpio/gpio-sx150x.c deleted file mode 100644 index af95de89db01..000000000000 --- a/drivers/gpio/gpio-sx150x.c +++ /dev/null @@ -1,792 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * Driver for Semtech SX150X I2C GPIO Expanders - * - * Author: Gregory Bean - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define NO_UPDATE_PENDING -1 - -/* The chip models of sx150x */ -#define SX150X_123 0 -#define SX150X_456 1 -#define SX150X_789 2 - -struct sx150x_123_pri { - u8 reg_pld_mode; - u8 reg_pld_table0; - u8 reg_pld_table1; - u8 reg_pld_table2; - u8 reg_pld_table3; - u8 reg_pld_table4; - u8 reg_advance; -}; - -struct sx150x_456_pri { - u8 reg_pld_mode; - u8 reg_pld_table0; - u8 reg_pld_table1; - u8 reg_pld_table2; - u8 reg_pld_table3; - u8 reg_pld_table4; - u8 reg_advance; -}; - -struct sx150x_789_pri { - u8 reg_drain; - u8 reg_polarity; - u8 reg_clock; - u8 reg_misc; - u8 reg_reset; - u8 ngpios; -}; - -struct sx150x_device_data { - u8 model; - u8 reg_pullup; - u8 reg_pulldn; - u8 reg_dir; - u8 reg_data; - u8 reg_irq_mask; - u8 reg_irq_src; - u8 reg_sense; - u8 ngpios; - union { - struct sx150x_123_pri x123; - struct sx150x_456_pri x456; - struct sx150x_789_pri x789; - } pri; -}; - -/** - * struct sx150x_platform_data - config data for SX150x driver - * @gpio_base: The index number of the first GPIO assigned to this - * GPIO expander. The expander will create a block of - * consecutively numbered gpios beginning at the given base, - * with the size of the block depending on the model of the - * expander chip. - * @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO - * instead of as an oscillator, increasing the size of the - * GP(I)O pool created by this expander by one. The - * output-only GPO pin will be added at the end of the block. - * @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor - * for each IO line in the expander. Setting the bit at - * position n will enable the pull-up for the IO at - * the corresponding offset. For chips with fewer than - * 16 IO pins, high-end bits are ignored. - * @io_pulldn_ena: A bit-mask which enables-or disables the pull-down - * resistor for each IO line in the expander. Setting the - * bit at position n will enable the pull-down for the IO at - * the corresponding offset. For chips with fewer than - * 16 IO pins, high-end bits are ignored. - * @io_polarity: A bit-mask which enables polarity inversion for each IO line - * in the expander. Setting the bit at position n inverts - * the polarity of that IO line, while clearing it results - * in normal polarity. For chips with fewer than 16 IO pins, - * high-end bits are ignored. - * @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line - * is connected, via which it reports interrupt events - * across all GPIO lines. This must be a real, - * pre-existing IRQ line. - * Setting this value < 0 disables the irq_chip functionality - * of the driver. - * @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based - * IRQ lines will appear. Similarly to gpio_base, the expander - * will create a block of irqs beginning at this number. - * This value is ignored if irq_summary is < 0. - * @reset_during_probe: If set to true, the driver will trigger a full - * reset of the chip at the beginning of the probe - * in order to place it in a known state. - */ -struct sx150x_platform_data { - unsigned gpio_base; - bool oscio_is_gpo; - u16 io_pullup_ena; - u16 io_pulldn_ena; - u16 io_polarity; - int irq_summary; - unsigned irq_base; - bool reset_during_probe; -}; - -struct sx150x_chip { - struct gpio_chip gpio_chip; - struct i2c_client *client; - const struct sx150x_device_data *dev_cfg; - int irq_summary; - int irq_base; - int irq_update; - u32 irq_sense; - u32 irq_masked; - u32 dev_sense; - u32 dev_masked; - struct irq_chip irq_chip; - struct mutex lock; -}; - -static const struct sx150x_device_data sx150x_devices[] = { - [0] = { /* sx1508q */ - .model = SX150X_789, - .reg_pullup = 0x03, - .reg_pulldn = 0x04, - .reg_dir = 0x07, - .reg_data = 0x08, - .reg_irq_mask = 0x09, - .reg_irq_src = 0x0c, - .reg_sense = 0x0b, - .pri.x789 = { - .reg_drain = 0x05, - .reg_polarity = 0x06, - .reg_clock = 0x0f, - .reg_misc = 0x10, - .reg_reset = 0x7d, - }, - .ngpios = 8, - }, - [1] = { /* sx1509q */ - .model = SX150X_789, - .reg_pullup = 0x07, - .reg_pulldn = 0x09, - .reg_dir = 0x0f, - .reg_data = 0x11, - .reg_irq_mask = 0x13, - .reg_irq_src = 0x19, - .reg_sense = 0x17, - .pri.x789 = { - .reg_drain = 0x0b, - .reg_polarity = 0x0d, - .reg_clock = 0x1e, - .reg_misc = 0x1f, - .reg_reset = 0x7d, - }, - .ngpios = 16 - }, - [2] = { /* sx1506q */ - .model = SX150X_456, - .reg_pullup = 0x05, - .reg_pulldn = 0x07, - .reg_dir = 0x03, - .reg_data = 0x01, - .reg_irq_mask = 0x09, - .reg_irq_src = 0x0f, - .reg_sense = 0x0d, - .pri.x456 = { - .reg_pld_mode = 0x21, - .reg_pld_table0 = 0x23, - .reg_pld_table1 = 0x25, - .reg_pld_table2 = 0x27, - .reg_pld_table3 = 0x29, - .reg_pld_table4 = 0x2b, - .reg_advance = 0xad, - }, - .ngpios = 16 - }, - [3] = { /* sx1502q */ - .model = SX150X_123, - .reg_pullup = 0x02, - .reg_pulldn = 0x03, - .reg_dir = 0x01, - .reg_data = 0x00, - .reg_irq_mask = 0x05, - .reg_irq_src = 0x08, - .reg_sense = 0x07, - .pri.x123 = { - .reg_pld_mode = 0x10, - .reg_pld_table0 = 0x11, - .reg_pld_table1 = 0x12, - .reg_pld_table2 = 0x13, - .reg_pld_table3 = 0x14, - .reg_pld_table4 = 0x15, - .reg_advance = 0xad, - }, - .ngpios = 8, - }, -}; - -static const struct i2c_device_id sx150x_id[] = { - {"sx1508q", 0}, - {"sx1509q", 1}, - {"sx1506q", 2}, - {"sx1502q", 3}, - {} -}; - -static const struct of_device_id sx150x_of_match[] = { - { .compatible = "semtech,sx1508q" }, - { .compatible = "semtech,sx1509q" }, - { .compatible = "semtech,sx1506q" }, - { .compatible = "semtech,sx1502q" }, - {}, -}; - -static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val) -{ - s32 err = i2c_smbus_write_byte_data(client, reg, val); - - if (err < 0) - dev_warn(&client->dev, - "i2c write fail: can't write %02x to %02x: %d\n", - val, reg, err); - return err; -} - -static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val) -{ - s32 err = i2c_smbus_read_byte_data(client, reg); - - if (err >= 0) - *val = err; - else - dev_warn(&client->dev, - "i2c read fail: can't read from %02x: %d\n", - reg, err); - return err; -} - -static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset) -{ - return (chip->dev_cfg->ngpios == offset); -} - -/* - * These utility functions solve the common problem of locating and setting - * configuration bits. Configuration bits are grouped into registers - * whose indexes increase downwards. For example, with eight-bit registers, - * sixteen gpios would have their config bits grouped in the following order: - * REGISTER N-1 [ f e d c b a 9 8 ] - * N [ 7 6 5 4 3 2 1 0 ] - * - * For multi-bit configurations, the pattern gets wider: - * REGISTER N-3 [ f f e e d d c c ] - * N-2 [ b b a a 9 9 8 8 ] - * N-1 [ 7 7 6 6 5 5 4 4 ] - * N [ 3 3 2 2 1 1 0 0 ] - * - * Given the address of the starting register 'N', the index of the gpio - * whose configuration we seek to change, and the width in bits of that - * configuration, these functions allow us to locate the correct - * register and mask the correct bits. - */ -static inline void sx150x_find_cfg(u8 offset, u8 width, - u8 *reg, u8 *mask, u8 *shift) -{ - *reg -= offset * width / 8; - *mask = (1 << width) - 1; - *shift = (offset * width) % 8; - *mask <<= *shift; -} - -static s32 sx150x_write_cfg(struct sx150x_chip *chip, - u8 offset, u8 width, u8 reg, u8 val) -{ - u8 mask; - u8 data; - u8 shift; - s32 err; - - sx150x_find_cfg(offset, width, ®, &mask, &shift); - err = sx150x_i2c_read(chip->client, reg, &data); - if (err < 0) - return err; - - data &= ~mask; - data |= (val << shift) & mask; - return sx150x_i2c_write(chip->client, reg, data); -} - -static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset) -{ - u8 reg = chip->dev_cfg->reg_data; - u8 mask; - u8 data; - u8 shift; - s32 err; - - sx150x_find_cfg(offset, 1, ®, &mask, &shift); - err = sx150x_i2c_read(chip->client, reg, &data); - if (err >= 0) - err = (data & mask) != 0 ? 1 : 0; - - return err; -} - -static void sx150x_set_oscio(struct sx150x_chip *chip, int val) -{ - sx150x_i2c_write(chip->client, - chip->dev_cfg->pri.x789.reg_clock, - (val ? 0x1f : 0x10)); -} - -static void sx150x_set_io(struct sx150x_chip *chip, unsigned offset, int val) -{ - sx150x_write_cfg(chip, - offset, - 1, - chip->dev_cfg->reg_data, - (val ? 1 : 0)); -} - -static int sx150x_io_input(struct sx150x_chip *chip, unsigned offset) -{ - return sx150x_write_cfg(chip, - offset, - 1, - chip->dev_cfg->reg_dir, - 1); -} - -static int sx150x_io_output(struct sx150x_chip *chip, unsigned offset, int val) -{ - int err; - - err = sx150x_write_cfg(chip, - offset, - 1, - chip->dev_cfg->reg_data, - (val ? 1 : 0)); - if (err >= 0) - err = sx150x_write_cfg(chip, - offset, - 1, - chip->dev_cfg->reg_dir, - 0); - return err; -} - -static int sx150x_gpio_get(struct gpio_chip *gc, unsigned offset) -{ - struct sx150x_chip *chip = gpiochip_get_data(gc); - int status = -EINVAL; - - if (!offset_is_oscio(chip, offset)) { - mutex_lock(&chip->lock); - status = sx150x_get_io(chip, offset); - mutex_unlock(&chip->lock); - } - - return (status < 0) ? status : !!status; -} - -static void sx150x_gpio_set(struct gpio_chip *gc, unsigned offset, int val) -{ - struct sx150x_chip *chip = gpiochip_get_data(gc); - - mutex_lock(&chip->lock); - if (offset_is_oscio(chip, offset)) - sx150x_set_oscio(chip, val); - else - sx150x_set_io(chip, offset, val); - mutex_unlock(&chip->lock); -} - -static int sx150x_gpio_set_single_ended(struct gpio_chip *gc, - unsigned offset, - enum single_ended_mode mode) -{ - struct sx150x_chip *chip = gpiochip_get_data(gc); - - /* On the SX160X 789 we can set open drain */ - if (chip->dev_cfg->model != SX150X_789) - return -ENOTSUPP; - - if (mode == LINE_MODE_PUSH_PULL) - return sx150x_write_cfg(chip, - offset, - 1, - chip->dev_cfg->pri.x789.reg_drain, - 0); - - if (mode == LINE_MODE_OPEN_DRAIN) - return sx150x_write_cfg(chip, - offset, - 1, - chip->dev_cfg->pri.x789.reg_drain, - 1); - return -ENOTSUPP; -} - -static int sx150x_gpio_direction_input(struct gpio_chip *gc, unsigned offset) -{ - struct sx150x_chip *chip = gpiochip_get_data(gc); - int status = -EINVAL; - - if (!offset_is_oscio(chip, offset)) { - mutex_lock(&chip->lock); - status = sx150x_io_input(chip, offset); - mutex_unlock(&chip->lock); - } - return status; -} - -static int sx150x_gpio_direction_output(struct gpio_chip *gc, - unsigned offset, - int val) -{ - struct sx150x_chip *chip = gpiochip_get_data(gc); - int status = 0; - - if (!offset_is_oscio(chip, offset)) { - mutex_lock(&chip->lock); - status = sx150x_io_output(chip, offset, val); - mutex_unlock(&chip->lock); - } - return status; -} - -static void sx150x_irq_mask(struct irq_data *d) -{ - struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d)); - unsigned n = d->hwirq; - - chip->irq_masked |= (1 << n); - chip->irq_update = n; -} - -static void sx150x_irq_unmask(struct irq_data *d) -{ - struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d)); - unsigned n = d->hwirq; - - chip->irq_masked &= ~(1 << n); - chip->irq_update = n; -} - -static int sx150x_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d)); - unsigned n, val = 0; - - if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) - return -EINVAL; - - n = d->hwirq; - - if (flow_type & IRQ_TYPE_EDGE_RISING) - val |= 0x1; - if (flow_type & IRQ_TYPE_EDGE_FALLING) - val |= 0x2; - - chip->irq_sense &= ~(3UL << (n * 2)); - chip->irq_sense |= val << (n * 2); - chip->irq_update = n; - return 0; -} - -static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id) -{ - struct sx150x_chip *chip = (struct sx150x_chip *)dev_id; - unsigned nhandled = 0; - unsigned sub_irq; - unsigned n; - s32 err; - u8 val; - int i; - - for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) { - err = sx150x_i2c_read(chip->client, - chip->dev_cfg->reg_irq_src - i, - &val); - if (err < 0) - continue; - - sx150x_i2c_write(chip->client, - chip->dev_cfg->reg_irq_src - i, - val); - for (n = 0; n < 8; ++n) { - if (val & (1 << n)) { - sub_irq = irq_find_mapping( - chip->gpio_chip.irqdomain, - (i * 8) + n); - handle_nested_irq(sub_irq); - ++nhandled; - } - } - } - - return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE); -} - -static void sx150x_irq_bus_lock(struct irq_data *d) -{ - struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d)); - - mutex_lock(&chip->lock); -} - -static void sx150x_irq_bus_sync_unlock(struct irq_data *d) -{ - struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d)); - unsigned n; - - if (chip->irq_update == NO_UPDATE_PENDING) - goto out; - - n = chip->irq_update; - chip->irq_update = NO_UPDATE_PENDING; - - /* Avoid updates if nothing changed */ - if (chip->dev_sense == chip->irq_sense && - chip->dev_masked == chip->irq_masked) - goto out; - - chip->dev_sense = chip->irq_sense; - chip->dev_masked = chip->irq_masked; - - if (chip->irq_masked & (1 << n)) { - sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 1); - sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, 0); - } else { - sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 0); - sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, - chip->irq_sense >> (n * 2)); - } -out: - mutex_unlock(&chip->lock); -} - -static void sx150x_init_chip(struct sx150x_chip *chip, - struct i2c_client *client, - kernel_ulong_t driver_data, - struct sx150x_platform_data *pdata) -{ - mutex_init(&chip->lock); - - chip->client = client; - chip->dev_cfg = &sx150x_devices[driver_data]; - chip->gpio_chip.parent = &client->dev; - chip->gpio_chip.label = client->name; - chip->gpio_chip.direction_input = sx150x_gpio_direction_input; - chip->gpio_chip.direction_output = sx150x_gpio_direction_output; - chip->gpio_chip.get = sx150x_gpio_get; - chip->gpio_chip.set = sx150x_gpio_set; - chip->gpio_chip.set_single_ended = sx150x_gpio_set_single_ended; - chip->gpio_chip.base = pdata->gpio_base; - chip->gpio_chip.can_sleep = true; - chip->gpio_chip.ngpio = chip->dev_cfg->ngpios; -#ifdef CONFIG_OF_GPIO - chip->gpio_chip.of_node = client->dev.of_node; - chip->gpio_chip.of_gpio_n_cells = 2; -#endif - if (pdata->oscio_is_gpo) - ++chip->gpio_chip.ngpio; - - chip->irq_chip.name = client->name; - chip->irq_chip.irq_mask = sx150x_irq_mask; - chip->irq_chip.irq_unmask = sx150x_irq_unmask; - chip->irq_chip.irq_set_type = sx150x_irq_set_type; - chip->irq_chip.irq_bus_lock = sx150x_irq_bus_lock; - chip->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock; - chip->irq_summary = -1; - chip->irq_base = -1; - chip->irq_masked = ~0; - chip->irq_sense = 0; - chip->dev_masked = ~0; - chip->dev_sense = 0; - chip->irq_update = NO_UPDATE_PENDING; -} - -static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg) -{ - int err = 0; - unsigned n; - - for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n) - err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8)); - return err; -} - -static int sx150x_reset(struct sx150x_chip *chip) -{ - int err; - - err = i2c_smbus_write_byte_data(chip->client, - chip->dev_cfg->pri.x789.reg_reset, - 0x12); - if (err < 0) - return err; - - err = i2c_smbus_write_byte_data(chip->client, - chip->dev_cfg->pri.x789.reg_reset, - 0x34); - return err; -} - -static int sx150x_init_hw(struct sx150x_chip *chip, - struct sx150x_platform_data *pdata) -{ - int err = 0; - - if (pdata->reset_during_probe) { - err = sx150x_reset(chip); - if (err < 0) - return err; - } - - if (chip->dev_cfg->model == SX150X_789) - err = sx150x_i2c_write(chip->client, - chip->dev_cfg->pri.x789.reg_misc, - 0x01); - else if (chip->dev_cfg->model == SX150X_456) - err = sx150x_i2c_write(chip->client, - chip->dev_cfg->pri.x456.reg_advance, - 0x04); - else - err = sx150x_i2c_write(chip->client, - chip->dev_cfg->pri.x123.reg_advance, - 0x00); - if (err < 0) - return err; - - err = sx150x_init_io(chip, chip->dev_cfg->reg_pullup, - pdata->io_pullup_ena); - if (err < 0) - return err; - - err = sx150x_init_io(chip, chip->dev_cfg->reg_pulldn, - pdata->io_pulldn_ena); - if (err < 0) - return err; - - if (chip->dev_cfg->model == SX150X_789) { - err = sx150x_init_io(chip, - chip->dev_cfg->pri.x789.reg_polarity, - pdata->io_polarity); - if (err < 0) - return err; - } else if (chip->dev_cfg->model == SX150X_456) { - /* Set all pins to work in normal mode */ - err = sx150x_init_io(chip, - chip->dev_cfg->pri.x456.reg_pld_mode, - 0); - if (err < 0) - return err; - } else { - /* Set all pins to work in normal mode */ - err = sx150x_init_io(chip, - chip->dev_cfg->pri.x123.reg_pld_mode, - 0); - if (err < 0) - return err; - } - - - if (pdata->oscio_is_gpo) - sx150x_set_oscio(chip, 0); - - return err; -} - -static int sx150x_install_irq_chip(struct sx150x_chip *chip, - int irq_summary, - int irq_base) -{ - int err; - - chip->irq_summary = irq_summary; - chip->irq_base = irq_base; - - /* Add gpio chip to irq subsystem */ - err = gpiochip_irqchip_add(&chip->gpio_chip, - &chip->irq_chip, chip->irq_base, - handle_edge_irq, IRQ_TYPE_EDGE_BOTH); - if (err) { - dev_err(&chip->client->dev, - "could not connect irqchip to gpiochip\n"); - return err; - } - - err = devm_request_threaded_irq(&chip->client->dev, - irq_summary, NULL, sx150x_irq_thread_fn, - IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_FALLING, - chip->irq_chip.name, chip); - if (err < 0) { - chip->irq_summary = -1; - chip->irq_base = -1; - } - - return err; -} - -static int sx150x_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WRITE_WORD_DATA; - struct sx150x_platform_data *pdata; - struct sx150x_chip *chip; - int rc; - - pdata = dev_get_platdata(&client->dev); - if (!pdata) - return -EINVAL; - - if (!i2c_check_functionality(client->adapter, i2c_funcs)) - return -ENOSYS; - - chip = devm_kzalloc(&client->dev, - sizeof(struct sx150x_chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - - sx150x_init_chip(chip, client, id->driver_data, pdata); - rc = sx150x_init_hw(chip, pdata); - if (rc < 0) - return rc; - - rc = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip); - if (rc) - return rc; - - if (pdata->irq_summary >= 0) { - rc = sx150x_install_irq_chip(chip, - pdata->irq_summary, - pdata->irq_base); - if (rc < 0) - return rc; - } - - i2c_set_clientdata(client, chip); - - return 0; -} - -static struct i2c_driver sx150x_driver = { - .driver = { - .name = "sx150x", - .of_match_table = of_match_ptr(sx150x_of_match), - }, - .probe = sx150x_probe, - .id_table = sx150x_id, -}; - -static int __init sx150x_init(void) -{ - return i2c_add_driver(&sx150x_driver); -} -subsys_initcall(sx150x_init); diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c index d6e21f1a70a9..be97101c2c9a 100644 --- a/drivers/gpio/gpio-tc3589x.c +++ b/drivers/gpio/gpio-tc3589x.c @@ -337,21 +337,20 @@ static int tc3589x_gpio_probe(struct platform_device *pdev) return ret; } - ret = gpiochip_irqchip_add(&tc3589x_gpio->chip, - &tc3589x_gpio_irq_chip, - 0, - handle_simple_irq, - IRQ_TYPE_NONE); + ret = gpiochip_irqchip_add_nested(&tc3589x_gpio->chip, + &tc3589x_gpio_irq_chip, + 0, + handle_simple_irq, + IRQ_TYPE_NONE); if (ret) { dev_err(&pdev->dev, "could not connect irqchip to gpiochip\n"); return ret; } - gpiochip_set_chained_irqchip(&tc3589x_gpio->chip, - &tc3589x_gpio_irq_chip, - irq, - NULL); + gpiochip_set_nested_irqchip(&tc3589x_gpio->chip, + &tc3589x_gpio_irq_chip, + irq); platform_set_drvdata(pdev, tc3589x_gpio); diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c index 3edb09cb9ee0..521fbe338589 100644 --- a/drivers/gpio/gpio-vf610.c +++ b/drivers/gpio/gpio-vf610.c @@ -283,8 +283,4 @@ static struct platform_driver vf610_gpio_driver = { .probe = vf610_gpio_probe, }; -static int __init gpio_vf610_init(void) -{ - return platform_driver_register(&vf610_gpio_driver); -} -device_initcall(gpio_vf610_init); +builtin_platform_driver(vf610_gpio_driver); diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c index d0ddba7a9d08..34baee5b1dd6 100644 --- a/drivers/gpio/gpio-wcove.c +++ b/drivers/gpio/gpio-wcove.c @@ -426,8 +426,8 @@ static int wcove_gpio_probe(struct platform_device *pdev) return ret; } - ret = gpiochip_irqchip_add(&wg->chip, &wcove_irqchip, 0, - handle_simple_irq, IRQ_TYPE_NONE); + ret = gpiochip_irqchip_add_nested(&wg->chip, &wcove_irqchip, 0, + handle_simple_irq, IRQ_TYPE_NONE); if (ret) { dev_err(dev, "Failed to add irqchip: %d\n", ret); return ret; @@ -446,6 +446,8 @@ static int wcove_gpio_probe(struct platform_device *pdev) return ret; } + gpiochip_set_nested_irqchip(&wg->chip, &wcove_irqchip, virq); + return 0; } diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 72a4b326fd0d..a3faefa44f68 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -468,7 +468,8 @@ static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode, int ret; memset(&args, 0, sizeof(args)); - ret = acpi_node_get_property_reference(fwnode, propname, index, &args); + ret = __acpi_node_get_property_reference(fwnode, propname, index, 3, + &args); if (ret) { struct acpi_device *adev = to_acpi_device_node(fwnode); @@ -483,13 +484,13 @@ static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode, * on returned args. */ lookup->adev = args.adev; - if (args.nargs >= 2) { - lookup->index = args.args[0]; - lookup->pin_index = args.args[1]; - /* 3rd argument, if present is used to specify active_low. */ - if (args.nargs >= 3) - lookup->active_low = !!args.args[2]; - } + if (args.nargs != 3) + return -EPROTO; + + lookup->index = args.args[0]; + lookup->pin_index = args.args[1]; + lookup->active_low = !!args.args[2]; + return 0; } @@ -859,6 +860,77 @@ static void acpi_gpiochip_free_regions(struct acpi_gpio_chip *achip) } } +static struct gpio_desc *acpi_gpiochip_parse_own_gpio( + struct acpi_gpio_chip *achip, struct fwnode_handle *fwnode, + const char **name, unsigned int *lflags, unsigned int *dflags) +{ + struct gpio_chip *chip = achip->chip; + struct gpio_desc *desc; + u32 gpios[2]; + int ret; + + *lflags = 0; + *dflags = 0; + *name = NULL; + + ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios, + ARRAY_SIZE(gpios)); + if (ret < 0) + return ERR_PTR(ret); + + ret = acpi_gpiochip_pin_to_gpio_offset(chip->gpiodev, gpios[0]); + if (ret < 0) + return ERR_PTR(ret); + + desc = gpiochip_get_desc(chip, ret); + if (IS_ERR(desc)) + return desc; + + if (gpios[1]) + *lflags |= GPIO_ACTIVE_LOW; + + if (fwnode_property_present(fwnode, "input")) + *dflags |= GPIOD_IN; + else if (fwnode_property_present(fwnode, "output-low")) + *dflags |= GPIOD_OUT_LOW; + else if (fwnode_property_present(fwnode, "output-high")) + *dflags |= GPIOD_OUT_HIGH; + else + return ERR_PTR(-EINVAL); + + fwnode_property_read_string(fwnode, "line-name", name); + + return desc; +} + +static void acpi_gpiochip_scan_gpios(struct acpi_gpio_chip *achip) +{ + struct gpio_chip *chip = achip->chip; + struct fwnode_handle *fwnode; + + device_for_each_child_node(chip->parent, fwnode) { + unsigned int lflags, dflags; + struct gpio_desc *desc; + const char *name; + int ret; + + if (!fwnode_property_present(fwnode, "gpio-hog")) + continue; + + desc = acpi_gpiochip_parse_own_gpio(achip, fwnode, &name, + &lflags, &dflags); + if (IS_ERR(desc)) + continue; + + ret = gpiod_hog(desc, name, lflags, dflags); + if (ret) { + dev_err(chip->parent, "Failed to hog GPIO\n"); + fwnode_handle_put(fwnode); + return; + } + } +} + void acpi_gpiochip_add(struct gpio_chip *chip) { struct acpi_gpio_chip *acpi_gpio; @@ -889,7 +961,11 @@ void acpi_gpiochip_add(struct gpio_chip *chip) return; } + if (!chip->names) + devprop_gpiochip_set_names(chip); + acpi_gpiochip_request_regions(acpi_gpio); + acpi_gpiochip_scan_gpios(acpi_gpio); acpi_walk_dep_device_list(handle); } @@ -918,18 +994,27 @@ void acpi_gpiochip_remove(struct gpio_chip *chip) kfree(acpi_gpio); } -static unsigned int acpi_gpio_package_count(const union acpi_object *obj) +static int acpi_gpio_package_count(const union acpi_object *obj) { const union acpi_object *element = obj->package.elements; const union acpi_object *end = element + obj->package.count; unsigned int count = 0; while (element < end) { - if (element->type == ACPI_TYPE_LOCAL_REFERENCE) + switch (element->type) { + case ACPI_TYPE_LOCAL_REFERENCE: + element += 3; + /* Fallthrough */ + case ACPI_TYPE_INTEGER: + element++; count++; + break; - element++; + default: + return -EPROTO; + } } + return count; } diff --git a/drivers/gpio/gpiolib-devprop.c b/drivers/gpio/gpiolib-devprop.c new file mode 100644 index 000000000000..27f383bda7d9 --- /dev/null +++ b/drivers/gpio/gpiolib-devprop.c @@ -0,0 +1,67 @@ +/* + * Device property helpers for GPIO chips. + * + * Copyright (C) 2016, Intel Corporation + * Author: Mika Westerberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include "gpiolib.h" + +/** + * devprop_gpiochip_set_names - Set GPIO line names using device properties + * @chip: GPIO chip whose lines should be named, if possible + * + * Looks for device property "gpio-line-names" and if it exists assigns + * GPIO line names for the chip. The memory allocated for the assigned + * names belong to the underlying firmware node and should not be released + * by the caller. + */ +void devprop_gpiochip_set_names(struct gpio_chip *chip) +{ + struct gpio_device *gdev = chip->gpiodev; + const char **names; + int ret, i; + + if (!chip->parent) { + dev_warn(&gdev->dev, "GPIO chip parent is NULL\n"); + return; + } + + ret = device_property_read_string_array(chip->parent, "gpio-line-names", + NULL, 0); + if (ret < 0) + return; + + if (ret != gdev->ngpio) { + dev_warn(chip->parent, + "names %d do not match number of GPIOs %d\n", ret, + gdev->ngpio); + return; + } + + names = kcalloc(gdev->ngpio, sizeof(*names), GFP_KERNEL); + if (!names) + return; + + ret = device_property_read_string_array(chip->parent, "gpio-line-names", + names, gdev->ngpio); + if (ret < 0) { + dev_warn(chip->parent, "failed to read GPIO line names\n"); + kfree(names); + return; + } + + for (i = 0; i < gdev->ngpio; i++) + gdev->descs[i].name = names[i]; + + kfree(names); +} diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index 193f15d50bba..92b185f19232 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -225,51 +225,6 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np, return desc; } -/** - * of_gpiochip_set_names() - set up the names of the lines - * @chip: GPIO chip whose lines should be named, if possible - */ -static void of_gpiochip_set_names(struct gpio_chip *gc) -{ - struct gpio_device *gdev = gc->gpiodev; - struct device_node *np = gc->of_node; - int i; - int nstrings; - - nstrings = of_property_count_strings(np, "gpio-line-names"); - if (nstrings <= 0) - /* Lines names not present */ - return; - - /* This is normally not what you want */ - if (gdev->ngpio != nstrings) - dev_info(&gdev->dev, "gpio-line-names specifies %d line " - "names but there are %d lines on the chip\n", - nstrings, gdev->ngpio); - - /* - * Make sure to not index beyond the end of the number of descriptors - * of the GPIO device. - */ - for (i = 0; i < gdev->ngpio; i++) { - const char *name; - int ret; - - ret = of_property_read_string_index(np, - "gpio-line-names", - i, - &name); - if (ret) { - if (ret != -ENODATA) - dev_err(&gdev->dev, - "unable to name line %d: %d\n", - i, ret); - break; - } - gdev->descs[i].name = name; - } -} - /** * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions * @chip: gpio chip to act on @@ -296,8 +251,10 @@ static int of_gpiochip_scan_gpios(struct gpio_chip *chip) continue; ret = gpiod_hog(desc, name, lflags, dflags); - if (ret < 0) + if (ret < 0) { + of_node_put(np); return ret; + } } return 0; @@ -526,7 +483,7 @@ int of_gpiochip_add(struct gpio_chip *chip) /* If the chip defines names itself, these take precedence */ if (!chip->names) - of_gpiochip_set_names(chip); + devprop_gpiochip_set_names(chip); of_node_get(chip->of_node); diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 868128a676ba..f4c26c7826cd 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -986,7 +986,8 @@ static int gpio_chrdev_open(struct inode *inode, struct file *filp) return -ENODEV; get_device(&gdev->dev); filp->private_data = gdev; - return 0; + + return nonseekable_open(inode, filp); } /** @@ -1011,7 +1012,7 @@ static const struct file_operations gpio_fileops = { .release = gpio_chrdev_release, .open = gpio_chrdev_open, .owner = THIS_MODULE, - .llseek = noop_llseek, + .llseek = no_llseek, .unlocked_ioctl = gpio_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = gpio_ioctl_compat, @@ -1512,7 +1513,7 @@ static bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip, } /** - * gpiochip_set_chained_irqchip() - sets a chained irqchip to a gpiochip + * gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip * @gpiochip: the gpiochip to set the irqchip chain to * @irqchip: the irqchip to chain to the gpiochip * @parent_irq: the irq number corresponding to the parent IRQ for this @@ -1521,10 +1522,10 @@ static bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip, * coming out of the gpiochip. If the interrupt is nested rather than * cascaded, pass NULL in this handler argument */ -void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip, - struct irq_chip *irqchip, - int parent_irq, - irq_flow_handler_t parent_handler) +static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + int parent_irq, + irq_flow_handler_t parent_handler) { unsigned int offset; @@ -1548,7 +1549,7 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip, irq_set_chained_handler_and_data(parent_irq, parent_handler, gpiochip); - gpiochip->irq_parent = parent_irq; + gpiochip->irq_chained_parent = parent_irq; } /* Set the parent IRQ for all affected IRQs */ @@ -1559,8 +1560,47 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip, parent_irq); } } + +/** + * gpiochip_set_chained_irqchip() - connects a chained irqchip to a gpiochip + * @gpiochip: the gpiochip to set the irqchip chain to + * @irqchip: the irqchip to chain to the gpiochip + * @parent_irq: the irq number corresponding to the parent IRQ for this + * chained irqchip + * @parent_handler: the parent interrupt handler for the accumulated IRQ + * coming out of the gpiochip. If the interrupt is nested rather than + * cascaded, pass NULL in this handler argument + */ +void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + int parent_irq, + irq_flow_handler_t parent_handler) +{ + gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq, + parent_handler); +} EXPORT_SYMBOL_GPL(gpiochip_set_chained_irqchip); +/** + * gpiochip_set_nested_irqchip() - connects a nested irqchip to a gpiochip + * @gpiochip: the gpiochip to set the irqchip nested handler to + * @irqchip: the irqchip to nest to the gpiochip + * @parent_irq: the irq number corresponding to the parent IRQ for this + * nested irqchip + */ +void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + int parent_irq) +{ + if (!gpiochip->irq_nested) { + chip_err(gpiochip, "tried to nest a chained gpiochip\n"); + return; + } + gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq, + NULL); +} +EXPORT_SYMBOL_GPL(gpiochip_set_nested_irqchip); + /** * gpiochip_irq_map() - maps an IRQ into a GPIO irqchip * @d: the irqdomain used by this irqchip @@ -1583,8 +1623,8 @@ static int gpiochip_irq_map(struct irq_domain *d, unsigned int irq, */ irq_set_lockdep_class(irq, chip->lock_key); irq_set_chip_and_handler(irq, chip->irqchip, chip->irq_handler); - /* Chips that can sleep need nested thread handlers */ - if (chip->can_sleep && !chip->irq_not_threaded) + /* Chips that use nested thread handlers have them marked */ + if (chip->irq_nested) irq_set_nested_thread(irq, 1); irq_set_noprobe(irq); @@ -1602,7 +1642,7 @@ static void gpiochip_irq_unmap(struct irq_domain *d, unsigned int irq) { struct gpio_chip *chip = d->host_data; - if (chip->can_sleep) + if (chip->irq_nested) irq_set_nested_thread(irq, 0); irq_set_chip_and_handler(irq, NULL, NULL); irq_set_chip_data(irq, NULL); @@ -1657,9 +1697,9 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) acpi_gpiochip_free_interrupts(gpiochip); - if (gpiochip->irq_parent) { - irq_set_chained_handler(gpiochip->irq_parent, NULL); - irq_set_handler_data(gpiochip->irq_parent, NULL); + if (gpiochip->irq_chained_parent) { + irq_set_chained_handler(gpiochip->irq_chained_parent, NULL); + irq_set_handler_data(gpiochip->irq_chained_parent, NULL); } /* Remove all IRQ mappings and delete the domain */ @@ -1683,7 +1723,7 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) } /** - * gpiochip_irqchip_add() - adds an irqchip to a gpiochip + * _gpiochip_irqchip_add() - adds an irqchip to a gpiochip * @gpiochip: the gpiochip to add the irqchip to * @irqchip: the irqchip to add to the gpiochip * @first_irq: if not dynamically assigned, the base (first) IRQ to @@ -1691,6 +1731,8 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) * @handler: the irq handler to use (often a predefined irq core function) * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE * to have the core avoid setting up any default type in the hardware. + * @nested: whether this is a nested irqchip calling handle_nested_irq() + * in its IRQ handler * @lock_key: lockdep class * * This function closely associates a certain irqchip with a certain @@ -1712,6 +1754,7 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip, unsigned int first_irq, irq_flow_handler_t handler, unsigned int type, + bool nested, struct lock_class_key *lock_key) { struct device_node *of_node; @@ -1726,6 +1769,7 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip, pr_err("missing gpiochip .dev parent pointer\n"); return -EINVAL; } + gpiochip->irq_nested = nested; of_node = gpiochip->parent->of_node; #ifdef CONFIG_OF_GPIO /* @@ -2223,6 +2267,7 @@ EXPORT_SYMBOL_GPL(gpiod_direction_input); static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value) { struct gpio_chip *gc = desc->gdev->chip; + int val = !!value; int ret; /* GPIOs used for IRQs shall not be set as output */ @@ -2242,7 +2287,7 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value) goto set_output_value; } /* Emulate open drain by not actively driving the line high */ - if (value) + if (val) return gpiod_direction_input(desc); } else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) { @@ -2253,7 +2298,7 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value) goto set_output_value; } /* Emulate open source by not actively driving the line low */ - if (!value) + if (!val) return gpiod_direction_input(desc); } else { /* Make sure to disable open drain/source hardware, if any */ @@ -2271,10 +2316,10 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value) return -EIO; } - ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), value); + ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), val); if (!ret) set_bit(FLAG_IS_OUT, &desc->flags); - trace_gpio_value(desc_to_gpio(desc), 0, value); + trace_gpio_value(desc_to_gpio(desc), 0, val); trace_gpio_direction(desc_to_gpio(desc), 0, ret); return ret; } @@ -2314,6 +2359,8 @@ int gpiod_direction_output(struct gpio_desc *desc, int value) VALIDATE_DESC(desc); if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) value = !value; + else + value = !!value; return _gpiod_direction_output_raw(desc, value); } EXPORT_SYMBOL_GPL(gpiod_direction_output); @@ -2758,6 +2805,15 @@ int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset) } set_bit(FLAG_USED_AS_IRQ, &desc->flags); + + /* + * If the consumer has not set up a label (such as when the + * IRQ is referenced from .to_irq()) we set up a label here + * so it is clear this is used as an interrupt. + */ + if (!desc->label) + desc_set_label(desc, "interrupt"); + return 0; } EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq); @@ -2772,10 +2828,17 @@ EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq); */ void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset) { - if (offset >= chip->ngpio) + struct gpio_desc *desc; + + desc = gpiochip_get_desc(chip, offset); + if (IS_ERR(desc)) return; - clear_bit(FLAG_USED_AS_IRQ, &chip->gpiodev->descs[offset].flags); + clear_bit(FLAG_USED_AS_IRQ, &desc->flags); + + /* If we only had this marking, erase it */ + if (desc->label && !strcmp(desc->label, "interrupt")) + desc_set_label(desc, NULL); } EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq); @@ -3170,7 +3233,7 @@ static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id, /* Process flags */ if (dflags & GPIOD_FLAGS_BIT_DIR_OUT) status = gpiod_direction_output(desc, - dflags & GPIOD_FLAGS_BIT_DIR_VAL); + !!(dflags & GPIOD_FLAGS_BIT_DIR_VAL)); else status = gpiod_direction_input(desc); diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h index 346fbda39220..d10eaf520860 100644 --- a/drivers/gpio/gpiolib.h +++ b/drivers/gpio/gpiolib.h @@ -209,6 +209,8 @@ static int __maybe_unused gpio_chip_hwgpio(const struct gpio_desc *desc) return desc - &desc->gdev->descs[0]; } +void devprop_gpiochip_set_names(struct gpio_chip *chip); + /* With descriptor prefix */ #define gpiod_emerg(desc, fmt, ...) \ diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 0e75d94972ba..801fa8bb05e1 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -164,6 +164,20 @@ config PINCTRL_SIRF select GENERIC_PINCONF select GPIOLIB_IRQCHIP +config PINCTRL_SX150X + bool "Semtech SX150x I2C GPIO expander pinctrl driver" + depends on GPIOLIB && I2C=y + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB_IRQCHIP + help + Say yes here to provide support for Semtech SX150x-series I2C + GPIO expanders as pinctrl module. + Compatible models include: + - 8 bits: sx1508q, sx1502q + - 16 bits: sx1509q, sx1506q + config PINCTRL_PISTACHIO def_bool y if MACH_PISTACHIO depends on GPIOLIB diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 11bad373dfe0..3b8e6f726acb 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += sirf/ +obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_PINCTRL_TZ1090) += pinctrl-tz1090.o obj-$(CONFIG_PINCTRL_TZ1090_PDC) += pinctrl-tz1090-pdc.o diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c new file mode 100644 index 000000000000..d2d4211e615e --- /dev/null +++ b/drivers/pinctrl/pinctrl-sx150x.c @@ -0,0 +1,1062 @@ +/* + * Copyright (c) 2016, BayLibre, SAS. All rights reserved. + * Author: Neil Armstrong + * + * Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * Driver for Semtech SX150X I2C GPIO Expanders + * + * Author: Gregory Bean + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "pinconf.h" +#include "pinctrl-utils.h" + +/* The chip models of sx150x */ +enum { + SX150X_123 = 0, + SX150X_456, + SX150X_789, +}; + +struct sx150x_123_pri { + u8 reg_pld_mode; + u8 reg_pld_table0; + u8 reg_pld_table1; + u8 reg_pld_table2; + u8 reg_pld_table3; + u8 reg_pld_table4; + u8 reg_advance; +}; + +struct sx150x_456_pri { + u8 reg_pld_mode; + u8 reg_pld_table0; + u8 reg_pld_table1; + u8 reg_pld_table2; + u8 reg_pld_table3; + u8 reg_pld_table4; + u8 reg_advance; +}; + +struct sx150x_789_pri { + u8 reg_drain; + u8 reg_polarity; + u8 reg_clock; + u8 reg_misc; + u8 reg_reset; + u8 ngpios; +}; + +struct sx150x_device_data { + u8 model; + u8 reg_pullup; + u8 reg_pulldn; + u8 reg_dir; + u8 reg_data; + u8 reg_irq_mask; + u8 reg_irq_src; + u8 reg_sense; + u8 ngpios; + union { + struct sx150x_123_pri x123; + struct sx150x_456_pri x456; + struct sx150x_789_pri x789; + } pri; + const struct pinctrl_pin_desc *pins; + unsigned int npins; +}; + +struct sx150x_pinctrl { + struct device *dev; + struct i2c_client *client; + struct pinctrl_dev *pctldev; + struct pinctrl_desc pinctrl_desc; + struct gpio_chip gpio; + struct irq_chip irq_chip; + struct { + int update; + u32 sense; + u32 masked; + u32 dev_sense; + u32 dev_masked; + } irq; + struct mutex lock; + const struct sx150x_device_data *data; +}; + +static const struct pinctrl_pin_desc sx150x_8_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "oscio"), +}; + +static const struct pinctrl_pin_desc sx150x_16_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), + PINCTRL_PIN(14, "gpio14"), + PINCTRL_PIN(15, "gpio15"), + PINCTRL_PIN(16, "oscio"), +}; + +static const struct sx150x_device_data sx1508q_device_data = { + .model = SX150X_789, + .reg_pullup = 0x03, + .reg_pulldn = 0x04, + .reg_dir = 0x07, + .reg_data = 0x08, + .reg_irq_mask = 0x09, + .reg_irq_src = 0x0c, + .reg_sense = 0x0b, + .pri.x789 = { + .reg_drain = 0x05, + .reg_polarity = 0x06, + .reg_clock = 0x0f, + .reg_misc = 0x10, + .reg_reset = 0x7d, + }, + .ngpios = 8, + .pins = sx150x_8_pins, + .npins = ARRAY_SIZE(sx150x_8_pins), +}; + +static const struct sx150x_device_data sx1509q_device_data = { + .model = SX150X_789, + .reg_pullup = 0x07, + .reg_pulldn = 0x09, + .reg_dir = 0x0f, + .reg_data = 0x11, + .reg_irq_mask = 0x13, + .reg_irq_src = 0x19, + .reg_sense = 0x17, + .pri.x789 = { + .reg_drain = 0x0b, + .reg_polarity = 0x0d, + .reg_clock = 0x1e, + .reg_misc = 0x1f, + .reg_reset = 0x7d, + }, + .ngpios = 16, + .pins = sx150x_16_pins, + .npins = ARRAY_SIZE(sx150x_16_pins), +}; + +static const struct sx150x_device_data sx1506q_device_data = { + .model = SX150X_456, + .reg_pullup = 0x05, + .reg_pulldn = 0x07, + .reg_dir = 0x03, + .reg_data = 0x01, + .reg_irq_mask = 0x09, + .reg_irq_src = 0x0f, + .reg_sense = 0x0d, + .pri.x456 = { + .reg_pld_mode = 0x21, + .reg_pld_table0 = 0x23, + .reg_pld_table1 = 0x25, + .reg_pld_table2 = 0x27, + .reg_pld_table3 = 0x29, + .reg_pld_table4 = 0x2b, + .reg_advance = 0xad, + }, + .ngpios = 16, + .pins = sx150x_16_pins, + .npins = 16, /* oscio not available */ +}; + +static const struct sx150x_device_data sx1502q_device_data = { + .model = SX150X_123, + .reg_pullup = 0x02, + .reg_pulldn = 0x03, + .reg_dir = 0x01, + .reg_data = 0x00, + .reg_irq_mask = 0x05, + .reg_irq_src = 0x08, + .reg_sense = 0x07, + .pri.x123 = { + .reg_pld_mode = 0x10, + .reg_pld_table0 = 0x11, + .reg_pld_table1 = 0x12, + .reg_pld_table2 = 0x13, + .reg_pld_table3 = 0x14, + .reg_pld_table4 = 0x15, + .reg_advance = 0xad, + }, + .ngpios = 8, + .pins = sx150x_8_pins, + .npins = 8, /* oscio not available */ +}; + +static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val) +{ + s32 err = i2c_smbus_write_byte_data(client, reg, val); + + if (err < 0) + dev_warn(&client->dev, + "i2c write fail: can't write %02x to %02x: %d\n", + val, reg, err); + return err; +} + +static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val) +{ + s32 err = i2c_smbus_read_byte_data(client, reg); + + if (err >= 0) + *val = err; + else + dev_warn(&client->dev, + "i2c read fail: can't read from %02x: %d\n", + reg, err); + return err; +} + +/* + * These utility functions solve the common problem of locating and setting + * configuration bits. Configuration bits are grouped into registers + * whose indexes increase downwards. For example, with eight-bit registers, + * sixteen gpios would have their config bits grouped in the following order: + * REGISTER N-1 [ f e d c b a 9 8 ] + * N [ 7 6 5 4 3 2 1 0 ] + * + * For multi-bit configurations, the pattern gets wider: + * REGISTER N-3 [ f f e e d d c c ] + * N-2 [ b b a a 9 9 8 8 ] + * N-1 [ 7 7 6 6 5 5 4 4 ] + * N [ 3 3 2 2 1 1 0 0 ] + * + * Given the address of the starting register 'N', the index of the gpio + * whose configuration we seek to change, and the width in bits of that + * configuration, these functions allow us to locate the correct + * register and mask the correct bits. + */ +static inline void sx150x_find_cfg(u8 offset, u8 width, + u8 *reg, u8 *mask, u8 *shift) +{ + *reg -= offset * width / 8; + *mask = (1 << width) - 1; + *shift = (offset * width) % 8; + *mask <<= *shift; +} + +static int sx150x_write_cfg(struct i2c_client *client, + u8 offset, u8 width, u8 reg, u8 val) +{ + u8 mask; + u8 data; + u8 shift; + int err; + + sx150x_find_cfg(offset, width, ®, &mask, &shift); + err = sx150x_i2c_read(client, reg, &data); + if (err < 0) + return err; + + data &= ~mask; + data |= (val << shift) & mask; + return sx150x_i2c_write(client, reg, data); +} + +static int sx150x_read_cfg(struct i2c_client *client, + u8 offset, u8 width, u8 reg) +{ + u8 mask; + u8 data; + u8 shift; + int err; + + sx150x_find_cfg(offset, width, ®, &mask, &shift); + err = sx150x_i2c_read(client, reg, &data); + if (err < 0) + return err; + + return (data & mask); +} + +static int sx150x_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + return 0; +} + +static const char *sx150x_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned int group) +{ + return NULL; +} + +static int sx150x_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned int group, + const unsigned int **pins, + unsigned int *num_pins) +{ + return -ENOTSUPP; +} + +static const struct pinctrl_ops sx150x_pinctrl_ops = { + .get_groups_count = sx150x_pinctrl_get_groups_count, + .get_group_name = sx150x_pinctrl_get_group_name, + .get_group_pins = sx150x_pinctrl_get_group_pins, +#ifdef CONFIG_OF + .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, + .dt_free_map = pinctrl_utils_free_map, +#endif +}; + +static bool sx150x_pin_is_oscio(struct sx150x_pinctrl *pctl, unsigned int pin) +{ + if (pin >= pctl->data->npins) + return false; + + /* OSCIO pin is only present in 789 devices */ + if (pctl->data->model != SX150X_789) + return false; + + return !strcmp(pctl->data->pins[pin].name, "oscio"); +} + +static int sx150x_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); + int status; + + if (sx150x_pin_is_oscio(pctl, offset)) + return false; + + status = sx150x_read_cfg(pctl->client, offset, 1, pctl->data->reg_dir); + if (status >= 0) + status = !!status; + + return status; +} + +static int sx150x_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); + int status; + + if (sx150x_pin_is_oscio(pctl, offset)) + return -EINVAL; + + status = sx150x_read_cfg(pctl->client, offset, 1, pctl->data->reg_data); + if (status >= 0) + status = !!status; + + return status; +} + +static int sx150x_gpio_set_single_ended(struct gpio_chip *chip, + unsigned int offset, + enum single_ended_mode mode) +{ + struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); + int ret; + + switch (mode) { + case LINE_MODE_PUSH_PULL: + if (pctl->data->model != SX150X_789 || + sx150x_pin_is_oscio(pctl, offset)) + return 0; + + mutex_lock(&pctl->lock); + ret = sx150x_write_cfg(pctl->client, offset, 1, + pctl->data->pri.x789.reg_drain, + 0); + mutex_unlock(&pctl->lock); + if (ret < 0) + return ret; + break; + + case LINE_MODE_OPEN_DRAIN: + if (pctl->data->model != SX150X_789 || + sx150x_pin_is_oscio(pctl, offset)) + return -ENOTSUPP; + + mutex_lock(&pctl->lock); + ret = sx150x_write_cfg(pctl->client, offset, 1, + pctl->data->pri.x789.reg_drain, + 1); + mutex_unlock(&pctl->lock); + if (ret < 0) + return ret; + break; + + default: + return -ENOTSUPP; + } + + return 0; +} + +static void sx150x_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); + + if (sx150x_pin_is_oscio(pctl, offset)) { + + mutex_lock(&pctl->lock); + sx150x_i2c_write(pctl->client, + pctl->data->pri.x789.reg_clock, + (value ? 0x1f : 0x10)); + mutex_unlock(&pctl->lock); + } else { + mutex_lock(&pctl->lock); + sx150x_write_cfg(pctl->client, offset, 1, + pctl->data->reg_data, + (value ? 1 : 0)); + mutex_unlock(&pctl->lock); + } +} + +static int sx150x_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); + int ret; + + if (sx150x_pin_is_oscio(pctl, offset)) + return -EINVAL; + + mutex_lock(&pctl->lock); + ret = sx150x_write_cfg(pctl->client, offset, 1, + pctl->data->reg_dir, 1); + mutex_unlock(&pctl->lock); + + return ret; +} + +static int sx150x_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); + int status; + + if (sx150x_pin_is_oscio(pctl, offset)) { + sx150x_gpio_set(chip, offset, value); + return 0; + } + + mutex_lock(&pctl->lock); + status = sx150x_write_cfg(pctl->client, offset, 1, + pctl->data->reg_data, + (value ? 1 : 0)); + if (status >= 0) + status = sx150x_write_cfg(pctl->client, offset, 1, + pctl->data->reg_dir, 0); + mutex_unlock(&pctl->lock); + + return status; +} + +static void sx150x_irq_mask(struct irq_data *d) +{ + struct sx150x_pinctrl *pctl = + gpiochip_get_data(irq_data_get_irq_chip_data(d)); + unsigned int n = d->hwirq; + + pctl->irq.masked |= (1 << n); + pctl->irq.update = n; +} + +static void sx150x_irq_unmask(struct irq_data *d) +{ + struct sx150x_pinctrl *pctl = + gpiochip_get_data(irq_data_get_irq_chip_data(d)); + unsigned int n = d->hwirq; + + pctl->irq.masked &= ~(1 << n); + pctl->irq.update = n; +} + +static int sx150x_irq_set_type(struct irq_data *d, unsigned int flow_type) +{ + struct sx150x_pinctrl *pctl = + gpiochip_get_data(irq_data_get_irq_chip_data(d)); + unsigned int n, val = 0; + + if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + return -EINVAL; + + n = d->hwirq; + + if (flow_type & IRQ_TYPE_EDGE_RISING) + val |= 0x1; + if (flow_type & IRQ_TYPE_EDGE_FALLING) + val |= 0x2; + + pctl->irq.sense &= ~(3UL << (n * 2)); + pctl->irq.sense |= val << (n * 2); + pctl->irq.update = n; + return 0; +} + +static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id) +{ + struct sx150x_pinctrl *pctl = (struct sx150x_pinctrl *)dev_id; + unsigned int nhandled = 0; + unsigned int sub_irq; + unsigned int n; + s32 err; + u8 val; + int i; + + for (i = (pctl->data->ngpios / 8) - 1; i >= 0; --i) { + err = sx150x_i2c_read(pctl->client, + pctl->data->reg_irq_src - i, + &val); + if (err < 0) + continue; + + err = sx150x_i2c_write(pctl->client, + pctl->data->reg_irq_src - i, + val); + if (err < 0) + continue; + + for (n = 0; n < 8; ++n) { + if (val & (1 << n)) { + sub_irq = irq_find_mapping( + pctl->gpio.irqdomain, + (i * 8) + n); + handle_nested_irq(sub_irq); + ++nhandled; + } + } + } + + return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE); +} + +static void sx150x_irq_bus_lock(struct irq_data *d) +{ + struct sx150x_pinctrl *pctl = + gpiochip_get_data(irq_data_get_irq_chip_data(d)); + + mutex_lock(&pctl->lock); +} + +static void sx150x_irq_bus_sync_unlock(struct irq_data *d) +{ + struct sx150x_pinctrl *pctl = + gpiochip_get_data(irq_data_get_irq_chip_data(d)); + unsigned int n; + + if (pctl->irq.update < 0) + goto out; + + n = pctl->irq.update; + pctl->irq.update = -1; + + /* Avoid updates if nothing changed */ + if (pctl->irq.dev_sense == pctl->irq.sense && + pctl->irq.dev_masked == pctl->irq.masked) + goto out; + + pctl->irq.dev_sense = pctl->irq.sense; + pctl->irq.dev_masked = pctl->irq.masked; + + if (pctl->irq.masked & (1 << n)) { + sx150x_write_cfg(pctl->client, n, 1, + pctl->data->reg_irq_mask, 1); + sx150x_write_cfg(pctl->client, n, 2, + pctl->data->reg_sense, 0); + } else { + sx150x_write_cfg(pctl->client, n, 1, + pctl->data->reg_irq_mask, 0); + sx150x_write_cfg(pctl->client, n, 2, + pctl->data->reg_sense, + pctl->irq.sense >> (n * 2)); + } +out: + mutex_unlock(&pctl->lock); +} + +static int sx150x_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *config) +{ + struct sx150x_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + unsigned int param = pinconf_to_config_param(*config); + int ret; + u32 arg; + + if (sx150x_pin_is_oscio(pctl, pin)) { + u8 data; + + switch (param) { + case PIN_CONFIG_DRIVE_PUSH_PULL: + case PIN_CONFIG_OUTPUT: + mutex_lock(&pctl->lock); + ret = sx150x_i2c_read(pctl->client, + pctl->data->pri.x789.reg_clock, + &data); + mutex_unlock(&pctl->lock); + + if (ret < 0) + return ret; + + if (param == PIN_CONFIG_DRIVE_PUSH_PULL) + arg = (data & 0x1f) ? 1 : 0; + else { + if ((data & 0x1f) == 0x1f) + arg = 1; + else if ((data & 0x1f) == 0x10) + arg = 0; + else + return -EINVAL; + } + + break; + default: + return -ENOTSUPP; + } + + goto out; + } + + switch (param) { + case PIN_CONFIG_BIAS_PULL_DOWN: + mutex_lock(&pctl->lock); + ret = sx150x_read_cfg(pctl->client, pin, 1, + pctl->data->reg_pulldn); + mutex_unlock(&pctl->lock); + + if (ret < 0) + return ret; + + if (!ret) + return -EINVAL; + + arg = 1; + break; + + case PIN_CONFIG_BIAS_PULL_UP: + mutex_lock(&pctl->lock); + ret = sx150x_read_cfg(pctl->client, pin, 1, + pctl->data->reg_pullup); + mutex_unlock(&pctl->lock); + + if (ret < 0) + return ret; + + if (!ret) + return -EINVAL; + + arg = 1; + break; + + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + if (pctl->data->model != SX150X_789) + return -ENOTSUPP; + + mutex_lock(&pctl->lock); + ret = sx150x_read_cfg(pctl->client, pin, 1, + pctl->data->pri.x789.reg_drain); + mutex_unlock(&pctl->lock); + + if (ret < 0) + return ret; + + if (!ret) + return -EINVAL; + + arg = 1; + break; + + case PIN_CONFIG_DRIVE_PUSH_PULL: + if (pctl->data->model != SX150X_789) + arg = true; + else { + mutex_lock(&pctl->lock); + ret = sx150x_read_cfg(pctl->client, pin, 1, + pctl->data->pri.x789.reg_drain); + mutex_unlock(&pctl->lock); + + if (ret < 0) + return ret; + + if (ret) + return -EINVAL; + + arg = 1; + } + break; + + case PIN_CONFIG_OUTPUT: + ret = sx150x_gpio_get_direction(&pctl->gpio, pin); + if (ret < 0) + return ret; + + if (ret) + return -EINVAL; + + ret = sx150x_gpio_get(&pctl->gpio, pin); + if (ret < 0) + return ret; + + arg = ret; + break; + + default: + return -ENOTSUPP; + } + +out: + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static int sx150x_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *configs, unsigned int num_configs) +{ + struct sx150x_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param; + u32 arg; + int i; + int ret; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + + if (sx150x_pin_is_oscio(pctl, pin)) { + if (param == PIN_CONFIG_OUTPUT) { + ret = sx150x_gpio_direction_output(&pctl->gpio, + pin, arg); + if (ret < 0) + return ret; + + continue; + } else + return -ENOTSUPP; + } + + switch (param) { + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: + case PIN_CONFIG_BIAS_DISABLE: + mutex_lock(&pctl->lock); + ret = sx150x_write_cfg(pctl->client, pin, 1, + pctl->data->reg_pulldn, 0); + mutex_unlock(&pctl->lock); + if (ret < 0) + return ret; + + mutex_lock(&pctl->lock); + ret = sx150x_write_cfg(pctl->client, pin, 1, + pctl->data->reg_pullup, 0); + mutex_unlock(&pctl->lock); + if (ret < 0) + return ret; + + break; + + case PIN_CONFIG_BIAS_PULL_UP: + mutex_lock(&pctl->lock); + ret = sx150x_write_cfg(pctl->client, pin, 1, + pctl->data->reg_pullup, + 1); + mutex_unlock(&pctl->lock); + if (ret < 0) + return ret; + + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + mutex_lock(&pctl->lock); + ret = sx150x_write_cfg(pctl->client, pin, 1, + pctl->data->reg_pulldn, + 1); + mutex_unlock(&pctl->lock); + if (ret < 0) + return ret; + + break; + + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + ret = sx150x_gpio_set_single_ended(&pctl->gpio, + pin, LINE_MODE_OPEN_DRAIN); + if (ret < 0) + return ret; + + break; + + case PIN_CONFIG_DRIVE_PUSH_PULL: + ret = sx150x_gpio_set_single_ended(&pctl->gpio, + pin, LINE_MODE_PUSH_PULL); + if (ret < 0) + return ret; + + break; + + case PIN_CONFIG_OUTPUT: + ret = sx150x_gpio_direction_output(&pctl->gpio, + pin, arg); + if (ret < 0) + return ret; + + break; + + default: + return -ENOTSUPP; + } + } /* for each config */ + + return 0; +} + +static const struct pinconf_ops sx150x_pinconf_ops = { + .pin_config_get = sx150x_pinconf_get, + .pin_config_set = sx150x_pinconf_set, + .is_generic = true, +}; + +static const struct i2c_device_id sx150x_id[] = { + {"sx1508q", (kernel_ulong_t) &sx1508q_device_data }, + {"sx1509q", (kernel_ulong_t) &sx1509q_device_data }, + {"sx1506q", (kernel_ulong_t) &sx1506q_device_data }, + {"sx1502q", (kernel_ulong_t) &sx1502q_device_data }, + {} +}; + +static const struct of_device_id sx150x_of_match[] = { + { .compatible = "semtech,sx1508q" }, + { .compatible = "semtech,sx1509q" }, + { .compatible = "semtech,sx1506q" }, + { .compatible = "semtech,sx1502q" }, + {}, +}; + +static int sx150x_init_io(struct sx150x_pinctrl *pctl, u8 base, u16 cfg) +{ + int err = 0; + unsigned int n; + + for (n = 0; err >= 0 && n < (pctl->data->ngpios / 8); ++n) + err = sx150x_i2c_write(pctl->client, base - n, cfg >> (n * 8)); + return err; +} + +static int sx150x_reset(struct sx150x_pinctrl *pctl) +{ + int err; + + err = i2c_smbus_write_byte_data(pctl->client, + pctl->data->pri.x789.reg_reset, + 0x12); + if (err < 0) + return err; + + err = i2c_smbus_write_byte_data(pctl->client, + pctl->data->pri.x789.reg_reset, + 0x34); + return err; +} + +static int sx150x_init_hw(struct sx150x_pinctrl *pctl) +{ + int err; + + if (pctl->data->model == SX150X_789 && + of_property_read_bool(pctl->dev->of_node, "semtech,probe-reset")) { + err = sx150x_reset(pctl); + if (err < 0) + return err; + } + + if (pctl->data->model == SX150X_789) + err = sx150x_i2c_write(pctl->client, + pctl->data->pri.x789.reg_misc, + 0x01); + else if (pctl->data->model == SX150X_456) + err = sx150x_i2c_write(pctl->client, + pctl->data->pri.x456.reg_advance, + 0x04); + else + err = sx150x_i2c_write(pctl->client, + pctl->data->pri.x123.reg_advance, + 0x00); + if (err < 0) + return err; + + /* Set all pins to work in normal mode */ + if (pctl->data->model == SX150X_789) { + err = sx150x_init_io(pctl, + pctl->data->pri.x789.reg_polarity, + 0); + if (err < 0) + return err; + } else if (pctl->data->model == SX150X_456) { + /* Set all pins to work in normal mode */ + err = sx150x_init_io(pctl, + pctl->data->pri.x456.reg_pld_mode, + 0); + if (err < 0) + return err; + } else { + /* Set all pins to work in normal mode */ + err = sx150x_init_io(pctl, + pctl->data->pri.x123.reg_pld_mode, + 0); + if (err < 0) + return err; + } + + return 0; +} + +static int sx150x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_WORD_DATA; + struct device *dev = &client->dev; + struct sx150x_pinctrl *pctl; + int ret; + + if (!id->driver_data) + return -EINVAL; + + if (!i2c_check_functionality(client->adapter, i2c_funcs)) + return -ENOSYS; + + pctl = devm_kzalloc(dev, sizeof(*pctl), GFP_KERNEL); + if (!pctl) + return -ENOMEM; + + pctl->dev = dev; + pctl->client = client; + pctl->data = (void *)id->driver_data; + + mutex_init(&pctl->lock); + + ret = sx150x_init_hw(pctl); + if (ret) + return ret; + + /* Register GPIO controller */ + pctl->gpio.label = devm_kstrdup(dev, client->name, GFP_KERNEL); + pctl->gpio.base = -1; + pctl->gpio.ngpio = pctl->data->npins; + pctl->gpio.get_direction = sx150x_gpio_get_direction; + pctl->gpio.direction_input = sx150x_gpio_direction_input; + pctl->gpio.direction_output = sx150x_gpio_direction_output; + pctl->gpio.get = sx150x_gpio_get; + pctl->gpio.set = sx150x_gpio_set; + pctl->gpio.set_single_ended = sx150x_gpio_set_single_ended; + pctl->gpio.parent = dev; +#ifdef CONFIG_OF_GPIO + pctl->gpio.of_node = dev->of_node; +#endif + pctl->gpio.can_sleep = true; + + ret = devm_gpiochip_add_data(dev, &pctl->gpio, pctl); + if (ret) + return ret; + + /* Add Interrupt support if an irq is specified */ + if (client->irq > 0) { + pctl->irq_chip.name = devm_kstrdup(dev, client->name, + GFP_KERNEL); + pctl->irq_chip.irq_mask = sx150x_irq_mask; + pctl->irq_chip.irq_unmask = sx150x_irq_unmask; + pctl->irq_chip.irq_set_type = sx150x_irq_set_type; + pctl->irq_chip.irq_bus_lock = sx150x_irq_bus_lock; + pctl->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock; + + pctl->irq.masked = ~0; + pctl->irq.sense = 0; + pctl->irq.dev_masked = ~0; + pctl->irq.dev_sense = 0; + pctl->irq.update = -1; + + ret = gpiochip_irqchip_add(&pctl->gpio, + &pctl->irq_chip, 0, + handle_edge_irq, IRQ_TYPE_NONE); + if (ret) { + dev_err(dev, "could not connect irqchip to gpiochip\n"); + return ret; + } + + ret = devm_request_threaded_irq(dev, client->irq, NULL, + sx150x_irq_thread_fn, + IRQF_ONESHOT | IRQF_SHARED | + IRQF_TRIGGER_FALLING, + pctl->irq_chip.name, pctl); + if (ret < 0) + return ret; + } + + /* Pinctrl_desc */ + pctl->pinctrl_desc.name = "sx150x-pinctrl"; + pctl->pinctrl_desc.pctlops = &sx150x_pinctrl_ops; + pctl->pinctrl_desc.confops = &sx150x_pinconf_ops; + pctl->pinctrl_desc.pins = pctl->data->pins; + pctl->pinctrl_desc.npins = pctl->data->npins; + pctl->pinctrl_desc.owner = THIS_MODULE; + + pctl->pctldev = pinctrl_register(&pctl->pinctrl_desc, dev, pctl); + if (IS_ERR(pctl->pctldev)) { + dev_err(dev, "Failed to register pinctrl device\n"); + return PTR_ERR(pctl->pctldev); + } + + return 0; +} + +static struct i2c_driver sx150x_driver = { + .driver = { + .name = "sx150x-pinctrl", + .of_match_table = of_match_ptr(sx150x_of_match), + }, + .probe = sx150x_probe, + .id_table = sx150x_id, +}; + +static int __init sx150x_init(void) +{ + return i2c_add_driver(&sx150x_driver); +} +subsys_initcall(sx150x_init); diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h deleted file mode 100644 index fb83c0453489..000000000000 --- a/include/linux/amba/pl061.h +++ /dev/null @@ -1,16 +0,0 @@ -#include - -/* platform data for the PL061 GPIO driver */ - -struct pl061_platform_data { - /* number of the first GPIO */ - unsigned gpio_base; - - /* number of the first IRQ. - * If the IRQ functionality in not desired this must be set to 0. - */ - unsigned irq_base; - - u8 directions; /* startup directions, 1: out, 0: in */ - u8 values; /* startup values */ -}; diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 24e2cc56beb1..c2748accea71 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -82,8 +82,6 @@ enum single_ended_mode { * implies that if the chip supports IRQs, these IRQs need to be threaded * as the chip access may sleep when e.g. reading out the IRQ status * registers. - * @irq_not_threaded: flag must be set if @can_sleep is set but the - * IRQs don't need to be threaded * @read_reg: reader function for generic GPIO * @write_reg: writer function for generic GPIO * @pin2mask: some generic GPIO controllers work with the big-endian bits @@ -91,7 +89,7 @@ enum single_ended_mode { * bit. This callback assigns the right bit mask. * @reg_dat: data (in) register for generic GPIO * @reg_set: output set register (out=high) for generic GPIO - * @reg_clk: output clear register (out=low) for generic GPIO + * @reg_clr: output clear register (out=low) for generic GPIO * @reg_dir: direction setting register for generic GPIO * @bgpio_bits: number of register bits used for a generic GPIO i.e. * * 8 @@ -109,8 +107,10 @@ enum single_ended_mode { * for GPIO IRQs, provided by GPIO driver * @irq_default_type: default IRQ triggering type applied during GPIO driver * initialization, provided by GPIO driver - * @irq_parent: GPIO IRQ chip parent/bank linux irq number, - * provided by GPIO driver + * @irq_chained_parent: GPIO IRQ chip parent/bank linux irq number, + * provided by GPIO driver for chained interrupt (not for nested + * interrupts). + * @irq_nested: True if set the interrupt handling is nested. * @irq_need_valid_mask: If set core allocates @irq_valid_mask with all * bits set to one * @irq_valid_mask: If not %NULL holds bitmask of GPIOs which are valid to @@ -166,7 +166,6 @@ struct gpio_chip { u16 ngpio; const char *const *names; bool can_sleep; - bool irq_not_threaded; #if IS_ENABLED(CONFIG_GPIO_GENERIC) unsigned long (*read_reg)(void __iomem *reg); @@ -192,7 +191,8 @@ struct gpio_chip { unsigned int irq_base; irq_flow_handler_t irq_handler; unsigned int irq_default_type; - int irq_parent; + int irq_chained_parent; + bool irq_nested; bool irq_need_valid_mask; unsigned long *irq_valid_mask; struct lock_class_key *lock_key; @@ -270,24 +270,40 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip, int parent_irq, irq_flow_handler_t parent_handler); +void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + int parent_irq); + int _gpiochip_irqchip_add(struct gpio_chip *gpiochip, struct irq_chip *irqchip, unsigned int first_irq, irq_flow_handler_t handler, unsigned int type, + bool nested, struct lock_class_key *lock_key); +/* FIXME: I assume threaded IRQchips do not have the lockdep problem */ +static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + unsigned int first_irq, + irq_flow_handler_t handler, + unsigned int type) +{ + return _gpiochip_irqchip_add(gpiochip, irqchip, first_irq, + handler, type, true, NULL); +} + #ifdef CONFIG_LOCKDEP #define gpiochip_irqchip_add(...) \ ( \ ({ \ static struct lock_class_key _key; \ - _gpiochip_irqchip_add(__VA_ARGS__, &_key); \ + _gpiochip_irqchip_add(__VA_ARGS__, false, &_key); \ }) \ ) #else #define gpiochip_irqchip_add(...) \ - _gpiochip_irqchip_add(__VA_ARGS__, NULL) + _gpiochip_irqchip_add(__VA_ARGS__, false, NULL) #endif #endif /* CONFIG_GPIOLIB_IRQCHIP */ diff --git a/tools/gpio/gpio-hammer.c b/tools/gpio/gpio-hammer.c index 37b3f141053d..f1eab587dfea 100644 --- a/tools/gpio/gpio-hammer.c +++ b/tools/gpio/gpio-hammer.c @@ -23,54 +23,31 @@ #include #include #include +#include "gpio-utils.h" int hammer_device(const char *device_name, unsigned int *lines, int nlines, unsigned int loops) { - struct gpiohandle_request req; struct gpiohandle_data data; - char *chrdev_name; char swirr[] = "-\\|/"; int fd; int ret; int i, j; unsigned int iteration = 0; - ret = asprintf(&chrdev_name, "/dev/%s", device_name); + memset(&data.values, 0, sizeof(data.values)); + ret = gpiotools_request_linehandle(device_name, lines, nlines, + GPIOHANDLE_REQUEST_OUTPUT, &data, + "gpio-hammler"); if (ret < 0) - return -ENOMEM; + goto exit_error; + else + fd = ret; - fd = open(chrdev_name, 0); - if (fd == -1) { - ret = -errno; - fprintf(stderr, "Failed to open %s\n", chrdev_name); + ret = gpiotools_get_values(fd, &data); + if (ret < 0) goto exit_close_error; - } - /* Request lines as output */ - for (i = 0; i < nlines; i++) - req.lineoffsets[i] = lines[i]; - req.flags = GPIOHANDLE_REQUEST_OUTPUT; /* Request as output */ - strcpy(req.consumer_label, "gpio-hammer"); - req.lines = nlines; - ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req); - if (ret == -1) { - ret = -errno; - fprintf(stderr, "Failed to issue GET LINEHANDLE " - "IOCTL (%d)\n", - ret); - goto exit_close_error; - } - - /* Read initial states */ - ret = ioctl(req.fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, &data); - if (ret == -1) { - ret = -errno; - fprintf(stderr, "Failed to issue GPIOHANDLE GET LINE " - "VALUES IOCTL (%d)\n", - ret); - goto exit_close_error; - } fprintf(stdout, "Hammer lines ["); for (i = 0; i < nlines; i++) { fprintf(stdout, "%d", lines[i]); @@ -92,23 +69,14 @@ int hammer_device(const char *device_name, unsigned int *lines, int nlines, for (i = 0; i < nlines; i++) data.values[i] = !data.values[i]; - ret = ioctl(req.fd, GPIOHANDLE_SET_LINE_VALUES_IOCTL, &data); - if (ret == -1) { - ret = -errno; - fprintf(stderr, "Failed to issue GPIOHANDLE SET LINE " - "VALUES IOCTL (%d)\n", - ret); + ret = gpiotools_set_values(fd, &data); + if (ret < 0) goto exit_close_error; - } + /* Re-read values to get status */ - ret = ioctl(req.fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, &data); - if (ret == -1) { - ret = -errno; - fprintf(stderr, "Failed to issue GPIOHANDLE GET LINE " - "VALUES IOCTL (%d)\n", - ret); + ret = gpiotools_get_values(fd, &data); + if (ret < 0) goto exit_close_error; - } fprintf(stdout, "[%c] ", swirr[j]); j++; @@ -132,9 +100,8 @@ int hammer_device(const char *device_name, unsigned int *lines, int nlines, ret = 0; exit_close_error: - if (close(fd) == -1) - perror("Failed to close GPIO character device file"); - free(chrdev_name); + gpiotools_release_linehandle(fd); +exit_error: return ret; } diff --git a/tools/gpio/gpio-utils.c b/tools/gpio/gpio-utils.c index 8208718f2c99..b86a32d90d88 100644 --- a/tools/gpio/gpio-utils.c +++ b/tools/gpio/gpio-utils.c @@ -2,10 +2,266 @@ * GPIO tools - helpers library for the GPIO tools * * Copyright (C) 2015 Linus Walleij + * Copyright (C) 2016 Bamvor Jian Zhang * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ +#include +#include +#include +#include +#include +#include +#include +#include +#include #include "gpio-utils.h" + +#define COMSUMER "gpio-utils" + +/** + * doc: Operation of gpio + * + * Provide the api of gpiochip for chardev interface. There are two + * types of api. The first one provide as same function as each + * ioctl, including request and release for lines of gpio, read/write + * the value of gpio. If the user want to do lots of read and write of + * lines of gpio, user should use this type of api. + * + * The second one provide the easy to use api for user. Each of the + * following api will request gpio lines, do the operation and then + * release these lines. + */ +/** + * gpiotools_request_linehandle() - request gpio lines in a gpiochip + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @nline: The number of lines to request. + * @flag: The new flag for requsted gpio. Reference + * "linux/gpio.h" for the meaning of flag. + * @data: Default value will be set to gpio when flag is + * GPIOHANDLE_REQUEST_OUTPUT. + * @consumer_label: The name of consumer, such as "sysfs", + * "powerkey". This is useful for other users to + * know who is using. + * + * Request gpio lines through the ioctl provided by chardev. User + * could call gpiotools_set_values() and gpiotools_get_values() to + * read and write respectively through the returned fd. Call + * gpiotools_release_linehandle() to release these lines after that. + * + * Return: On success return the fd; + * On failure return the errno. + */ +int gpiotools_request_linehandle(const char *device_name, unsigned int *lines, + unsigned int nlines, unsigned int flag, + struct gpiohandle_data *data, + const char *consumer_label) +{ + struct gpiohandle_request req; + char *chrdev_name; + int fd; + int i; + int ret; + + ret = asprintf(&chrdev_name, "/dev/%s", device_name); + if (ret < 0) + return -ENOMEM; + + fd = open(chrdev_name, 0); + if (fd == -1) { + ret = -errno; + fprintf(stderr, "Failed to open %s\n", chrdev_name); + goto exit_close_error; + } + + for (i = 0; i < nlines; i++) + req.lineoffsets[i] = lines[i]; + + req.flags = flag; + strcpy(req.consumer_label, consumer_label); + req.lines = nlines; + if (flag & GPIOHANDLE_REQUEST_OUTPUT) + memcpy(req.default_values, data, sizeof(req.default_values)); + + ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue GET LINEHANDLE IOCTL (%d)\n", + ret); + } + +exit_close_error: + if (close(fd) == -1) + perror("Failed to close GPIO character device file"); + free(chrdev_name); + return ret < 0 ? ret : req.fd; +} +/** + * gpiotools_set_values(): Set the value of gpio(s) + * @fd: The fd returned by + * gpiotools_request_linehandle(). + * @data: The array of values want to set. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_set_values(const int fd, struct gpiohandle_data *data) +{ + int ret; + + ret = ioctl(fd, GPIOHANDLE_SET_LINE_VALUES_IOCTL, data); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue %s (%d)\n", + "GPIOHANDLE_SET_LINE_VALUES_IOCTL", ret); + } + + return ret; +} + +/** + * gpiotools_get_values(): Get the value of gpio(s) + * @fd: The fd returned by + * gpiotools_request_linehandle(). + * @data: The array of values get from hardware. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_get_values(const int fd, struct gpiohandle_data *data) +{ + int ret; + + ret = ioctl(fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, data); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue %s (%d)\n", + "GPIOHANDLE_GET_LINE_VALUES_IOCTL", ret); + } + + return ret; +} + +/** + * gpiotools_release_linehandle(): Release the line(s) of gpiochip + * @fd: The fd returned by + * gpiotools_request_linehandle(). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_release_linehandle(const int fd) +{ + int ret; + + ret = close(fd); + if (ret == -1) { + perror("Failed to close GPIO LINEHANDLE device file"); + ret = -errno; + } + + return ret; +} + +/** + * gpiotools_get(): Get value from specific line + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @line: number of line, such as 2. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_get(const char *device_name, unsigned int line) +{ + struct gpiohandle_data data; + unsigned int lines[] = {line}; + + gpiotools_gets(device_name, lines, 1, &data); + return data.values[0]; +} + + +/** + * gpiotools_gets(): Get values from specific lines. + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0". + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @nline: The number of lines to request. + * @data: The array of values get from gpiochip. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_gets(const char *device_name, unsigned int *lines, + unsigned int nlines, struct gpiohandle_data *data) +{ + int fd; + int ret; + int ret_close; + + ret = gpiotools_request_linehandle(device_name, lines, nlines, + GPIOHANDLE_REQUEST_INPUT, data, + COMSUMER); + if (ret < 0) + return ret; + + fd = ret; + ret = gpiotools_get_values(fd, data); + ret_close = gpiotools_release_linehandle(fd); + return ret < 0 ? ret : ret_close; +} + +/** + * gpiotools_set(): Set value to specific line + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @line: number of line, such as 2. + * @value: The value of gpio, must be 0(low) or 1(high). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_set(const char *device_name, unsigned int line, + unsigned int value) +{ + struct gpiohandle_data data; + unsigned int lines[] = {line}; + + data.values[0] = value; + return gpiotools_sets(device_name, lines, 1, &data); +} + +/** + * gpiotools_sets(): Set values to specific lines. + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0". + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @nline: The number of lines to request. + * @data: The array of values set to gpiochip, must be + * 0(low) or 1(high). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_sets(const char *device_name, unsigned int *lines, + unsigned int nlines, struct gpiohandle_data *data) +{ + int ret; + + ret = gpiotools_request_linehandle(device_name, lines, nlines, + GPIOHANDLE_REQUEST_OUTPUT, data, + COMSUMER); + if (ret < 0) + return ret; + + return gpiotools_release_linehandle(ret); +} diff --git a/tools/gpio/gpio-utils.h b/tools/gpio/gpio-utils.h index 5f57133b8c04..344ea041f8d4 100644 --- a/tools/gpio/gpio-utils.h +++ b/tools/gpio/gpio-utils.h @@ -24,4 +24,20 @@ static inline int check_prefix(const char *str, const char *prefix) strncmp(str, prefix, strlen(prefix)) == 0; } +int gpiotools_request_linehandle(const char *device_name, unsigned int *lines, + unsigned int nlines, unsigned int flag, + struct gpiohandle_data *data, + const char *consumer_label); +int gpiotools_set_values(const int fd, struct gpiohandle_data *data); +int gpiotools_get_values(const int fd, struct gpiohandle_data *data); +int gpiotools_release_linehandle(const int fd); + +int gpiotools_get(const char *device_name, unsigned int line); +int gpiotools_gets(const char *device_name, unsigned int *lines, + unsigned int nlines, struct gpiohandle_data *data); +int gpiotools_set(const char *device_name, unsigned int line, + unsigned int value); +int gpiotools_sets(const char *device_name, unsigned int *lines, + unsigned int nlines, struct gpiohandle_data *data); + #endif /* _GPIO_UTILS_H_ */