net: stmmac: Fix descriptors address being in > 32 bits address space

Commit a993db88d1 ("net: stmmac: Enable support for > 32 Bits
addressing in XGMAC"), introduced support for > 32 bits addressing in
XGMAC but the conversion of descriptors to dma_addr_t was left out.

As some devices assing coherent memory in regions > 32 bits we need to
set lower and upper value of descriptors address when initializing DMA
channels.

Luckly, this was working for me because I was assigning CMA to < 4GB
address space for performance reasons.

Fixes: a993db88d1 ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c

@@ -289,18 +289,18 @@ static void sun8i_dwmac_dma_init(void __iomem *ioaddr,
 
 static void sun8i_dwmac_dma_init_rx(void __iomem *ioaddr,
 				    struct stmmac_dma_cfg *dma_cfg,
-				    u32 dma_rx_phy, u32 chan)
+				    dma_addr_t dma_rx_phy, u32 chan)
 {
 	/* Write RX descriptors address */
-	writel(dma_rx_phy, ioaddr + EMAC_RX_DESC_LIST);
+	writel(lower_32_bits(dma_rx_phy), ioaddr + EMAC_RX_DESC_LIST);
 }
 
 static void sun8i_dwmac_dma_init_tx(void __iomem *ioaddr,
 				    struct stmmac_dma_cfg *dma_cfg,
-				    u32 dma_tx_phy, u32 chan)
+				    dma_addr_t dma_tx_phy, u32 chan)
 {
 	/* Write TX descriptors address */
-	writel(dma_tx_phy, ioaddr + EMAC_TX_DESC_LIST);
+	writel(lower_32_bits(dma_tx_phy), ioaddr + EMAC_TX_DESC_LIST);
 }
 
 /* sun8i_dwmac_dump_regs() - Dump EMAC address space

drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c

@@ -112,18 +112,18 @@ static void dwmac1000_dma_init(void __iomem *ioaddr,
 
 static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
 				  struct stmmac_dma_cfg *dma_cfg,
-				  u32 dma_rx_phy, u32 chan)
+				  dma_addr_t dma_rx_phy, u32 chan)
 {
 	/* RX descriptor base address list must be written into DMA CSR3 */
-	writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR);
+	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
 }
 
 static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
 				  struct stmmac_dma_cfg *dma_cfg,
-				  u32 dma_tx_phy, u32 chan)
+				  dma_addr_t dma_tx_phy, u32 chan)
 {
 	/* TX descriptor base address list must be written into DMA CSR4 */
-	writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR);
+	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
 }
 
 static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)

drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c

@@ -31,18 +31,18 @@ static void dwmac100_dma_init(void __iomem *ioaddr,
 
 static void dwmac100_dma_init_rx(void __iomem *ioaddr,
 				 struct stmmac_dma_cfg *dma_cfg,
-				 u32 dma_rx_phy, u32 chan)
+				 dma_addr_t dma_rx_phy, u32 chan)
 {
 	/* RX descriptor base addr lists must be written into DMA CSR3 */
-	writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR);
+	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
 }
 
 static void dwmac100_dma_init_tx(void __iomem *ioaddr,
 				 struct stmmac_dma_cfg *dma_cfg,
-				 u32 dma_tx_phy, u32 chan)
+				 dma_addr_t dma_tx_phy, u32 chan)
 {
 	/* TX descriptor base addr lists must be written into DMA CSR4 */
-	writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR);
+	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
 }
 
 /* Store and Forward capability is not used at all.

drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c

@@ -70,7 +70,7 @@ static void dwmac4_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
 
 static void dwmac4_dma_init_rx_chan(void __iomem *ioaddr,
 				    struct stmmac_dma_cfg *dma_cfg,
-				    u32 dma_rx_phy, u32 chan)
+				    dma_addr_t dma_rx_phy, u32 chan)
 {
 	u32 value;
 	u32 rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
@@ -79,12 +79,12 @@ static void dwmac4_dma_init_rx_chan(void __iomem *ioaddr,
 	value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
 	writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
 
-	writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(chan));
+	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_CHAN_RX_BASE_ADDR(chan));
 }
 
 static void dwmac4_dma_init_tx_chan(void __iomem *ioaddr,
 				    struct stmmac_dma_cfg *dma_cfg,
-				    u32 dma_tx_phy, u32 chan)
+				    dma_addr_t dma_tx_phy, u32 chan)
 {
 	u32 value;
 	u32 txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
@@ -97,7 +97,7 @@ static void dwmac4_dma_init_tx_chan(void __iomem *ioaddr,
 
 	writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
 
-	writel(dma_tx_phy, ioaddr + DMA_CHAN_TX_BASE_ADDR(chan));
+	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_CHAN_TX_BASE_ADDR(chan));
 }
 
 static void dwmac4_dma_init_channel(void __iomem *ioaddr,

drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h

@@ -199,7 +199,9 @@
 #define XGMAC_RxPBL			GENMASK(21, 16)
 #define XGMAC_RxPBL_SHIFT		16
 #define XGMAC_RXST			BIT(0)
+#define XGMAC_DMA_CH_TxDESC_HADDR(x)	(0x00003110 + (0x80 * (x)))
 #define XGMAC_DMA_CH_TxDESC_LADDR(x)	(0x00003114 + (0x80 * (x)))
+#define XGMAC_DMA_CH_RxDESC_HADDR(x)	(0x00003118 + (0x80 * (x)))
 #define XGMAC_DMA_CH_RxDESC_LADDR(x)	(0x0000311c + (0x80 * (x)))
 #define XGMAC_DMA_CH_TxDESC_TAIL_LPTR(x)	(0x00003124 + (0x80 * (x)))
 #define XGMAC_DMA_CH_RxDESC_TAIL_LPTR(x)	(0x0000312c + (0x80 * (x)))

drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c

@@ -44,7 +44,7 @@ static void dwxgmac2_dma_init_chan(void __iomem *ioaddr,
 
 static void dwxgmac2_dma_init_rx_chan(void __iomem *ioaddr,
 				      struct stmmac_dma_cfg *dma_cfg,
-				      u32 dma_rx_phy, u32 chan)
+				      dma_addr_t phy, u32 chan)
 {
 	u32 rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
 	u32 value;
@@ -54,12 +54,13 @@ static void dwxgmac2_dma_init_rx_chan(void __iomem *ioaddr,
 	value |= (rxpbl << XGMAC_RxPBL_SHIFT) & XGMAC_RxPBL;
 	writel(value, ioaddr + XGMAC_DMA_CH_RX_CONTROL(chan));
 
-	writel(dma_rx_phy, ioaddr + XGMAC_DMA_CH_RxDESC_LADDR(chan));
+	writel(upper_32_bits(phy), ioaddr + XGMAC_DMA_CH_RxDESC_HADDR(chan));
+	writel(lower_32_bits(phy), ioaddr + XGMAC_DMA_CH_RxDESC_LADDR(chan));
 }
 
 static void dwxgmac2_dma_init_tx_chan(void __iomem *ioaddr,
 				      struct stmmac_dma_cfg *dma_cfg,
-				      u32 dma_tx_phy, u32 chan)
+				      dma_addr_t phy, u32 chan)
 {
 	u32 txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
 	u32 value;
@@ -70,7 +71,8 @@ static void dwxgmac2_dma_init_tx_chan(void __iomem *ioaddr,
 	value |= XGMAC_OSP;
 	writel(value, ioaddr + XGMAC_DMA_CH_TX_CONTROL(chan));
 
-	writel(dma_tx_phy, ioaddr + XGMAC_DMA_CH_TxDESC_LADDR(chan));
+	writel(upper_32_bits(phy), ioaddr + XGMAC_DMA_CH_TxDESC_HADDR(chan));
+	writel(lower_32_bits(phy), ioaddr + XGMAC_DMA_CH_TxDESC_LADDR(chan));
 }
 
 static void dwxgmac2_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)

drivers/net/ethernet/stmicro/stmmac/hwif.h

@@ -150,10 +150,10 @@ struct stmmac_dma_ops {
 			  struct stmmac_dma_cfg *dma_cfg, u32 chan);
 	void (*init_rx_chan)(void __iomem *ioaddr,
 			     struct stmmac_dma_cfg *dma_cfg,
-			     u32 dma_rx_phy, u32 chan);
+			     dma_addr_t phy, u32 chan);
 	void (*init_tx_chan)(void __iomem *ioaddr,
 			     struct stmmac_dma_cfg *dma_cfg,
-			     u32 dma_tx_phy, u32 chan);
+			     dma_addr_t phy, u32 chan);
 	/* Configure the AXI Bus Mode Register */
 	void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
 	/* Dump DMA registers */