diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 064033803449..a9ffe2d94c81 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -67,6 +67,7 @@
 /* MSW Mask & Data -WO */
 #define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK)	(0x004 + (8 * BANK))
 /* Data Register-RW */
+#define ZYNQ_GPIO_DATA_OFFSET(BANK)	(0x040 + (4 * BANK))
 #define ZYNQ_GPIO_DATA_RO_OFFSET(BANK)	(0x060 + (4 * BANK))
 /* Direction mode reg-RW */
 #define ZYNQ_GPIO_DIRM_OFFSET(BANK)	(0x204 + (0x40 * BANK))
@@ -98,6 +99,7 @@
 
 /* set to differentiate zynq from zynqmp, 0=zynqmp, 1=zynq */
 #define ZYNQ_GPIO_QUIRK_IS_ZYNQ	BIT(0)
+#define GPIO_QUIRK_DATA_RO_BUG	BIT(1)
 
 struct gpio_regs {
 	u32 datamsw[ZYNQMP_GPIO_MAX_BANK];
@@ -159,6 +161,17 @@ static int zynq_gpio_is_zynq(struct zynq_gpio *gpio)
 	return !!(gpio->p_data->quirks & ZYNQ_GPIO_QUIRK_IS_ZYNQ);
 }
 
+/**
+ * gpio_data_ro_bug - test if HW bug exists or not
+ * @gpio:       Pointer to driver data struct
+ *
+ * Return: 0 if bug doesnot exist, 1 if bug exists.
+ */
+static int gpio_data_ro_bug(struct zynq_gpio *gpio)
+{
+	return !!(gpio->p_data->quirks & GPIO_QUIRK_DATA_RO_BUG);
+}
+
 /**
  * zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
  * for a given pin in the GPIO device
@@ -210,9 +223,28 @@ static int zynq_gpio_get_value(struct gpio_chip *chip, unsigned int pin)
 
 	zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
 
-	data = readl_relaxed(gpio->base_addr +
-			     ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
-
+	if (gpio_data_ro_bug(gpio)) {
+		if (zynq_gpio_is_zynq(gpio)) {
+			if (bank_num <= 1) {
+				data = readl_relaxed(gpio->base_addr +
+					ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
+			} else {
+				data = readl_relaxed(gpio->base_addr +
+					ZYNQ_GPIO_DATA_OFFSET(bank_num));
+			}
+		} else {
+			if (bank_num <= 2) {
+				data = readl_relaxed(gpio->base_addr +
+					ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
+			} else {
+				data = readl_relaxed(gpio->base_addr +
+					ZYNQ_GPIO_DATA_OFFSET(bank_num));
+			}
+		}
+	} else {
+		data = readl_relaxed(gpio->base_addr +
+			ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
+	}
 	return (data >> bank_pin_num) & 1;
 }
 
@@ -704,6 +736,7 @@ static const struct dev_pm_ops zynq_gpio_dev_pm_ops = {
 
 static const struct zynq_platform_data zynqmp_gpio_def = {
 	.label = "zynqmp_gpio",
+	.quirks = GPIO_QUIRK_DATA_RO_BUG,
 	.ngpio = ZYNQMP_GPIO_NR_GPIOS,
 	.max_bank = ZYNQMP_GPIO_MAX_BANK,
 	.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP),
@@ -722,7 +755,7 @@ static const struct zynq_platform_data zynqmp_gpio_def = {
 
 static const struct zynq_platform_data zynq_gpio_def = {
 	.label = "zynq_gpio",
-	.quirks = ZYNQ_GPIO_QUIRK_IS_ZYNQ,
+	.quirks = ZYNQ_GPIO_QUIRK_IS_ZYNQ | GPIO_QUIRK_DATA_RO_BUG,
 	.ngpio = ZYNQ_GPIO_NR_GPIOS,
 	.max_bank = ZYNQ_GPIO_MAX_BANK,
 	.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),