openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

[media] media drivers: annotate fall-through 

Avoid warnings like those:

drivers/media/pci/ddbridge/ddbridge-core.c: In function 'dvb_input_detach':
drivers/media/pci/ddbridge/ddbridge-core.c:787:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (input->fe) {
      ^
drivers/media/pci/ddbridge/ddbridge-core.c:792:2: note: here
  case 4:
  ^~~~
...

On several cases, it is just that gcc 7.1 is not capable of
understanding the comment, but on other places, we need an
annotation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Mauro Carvalho Chehab 2017-05-18 08:13:28 -03:00
parent 39c4806e0a
commit 06eeefe8e3
35 changed files with 117 additions and 58 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/media/dvb-frontends/af9013.c
View File

@ -535,6 +535,7 @@ static void af9013_statistics_work(struct work_struct *work)
switch (state->statistics_step) {
default:
state->statistics_step = 0;
/* fall-through */
case 0:
af9013_statistics_signal_strength(&state->fe);
state->statistics_step++;

3
drivers/media/dvb-frontends/bcm3510.c
View File

@ -773,7 +773,8 @@ static int bcm3510_init(struct dvb_frontend* fe)
deb_info("attempting to download firmware\n");
if ((ret = bcm3510_init_cold(st)) < 0)
return ret;
case JDEC_EEPROM_LOAD_WAIT: /* fall-through is wanted */
/* fall-through */
case JDEC_EEPROM_LOAD_WAIT:
deb_info("firmware is loaded\n");
bcm3510_check_firmware_version(st);
break;

6
drivers/media/dvb-frontends/dib7000p.c
View File

@ -279,10 +279,10 @@ static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_p
if (state->version != SOC7090)
reg_1280 &= ~((1 << 11));
reg_1280 &= ~(1 << 6);
/* fall through wanted to enable the interfaces */
/* fall-through */
case DIB7000P_POWER_INTERFACE_ONLY:
/* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */
case DIB7000P_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C */
/* TODO power up either SDIO or I2C */
if (state->version == SOC7090)
reg_1280 &= ~((1 << 7) | (1 << 5));
else

20
drivers/media/dvb-frontends/drx39xyj/drxj.c
View File

@ -2837,7 +2837,8 @@ ctrl_set_cfg_mpeg_output(struct drx_demod_instance *demod, struct drx_cfg_mpeg_o
/* coef = 188/204 */
max_bit_rate =
(ext_attr->curr_symbol_rate / 8) * nr_bits * 188;
/* pass through b/c Annex A/c need following settings */
/* pass through as b/c Annex A/c need following settings */
/* fall-through */
case DRX_STANDARD_ITU_B:
rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_USAGE__A, FEC_OC_FCT_USAGE__PRE, 0);
if (rc != 0) {
@ -4776,9 +4777,9 @@ set_frequency(struct drx_demod_instance *demod,
No need to account for mirroring on RF
*/
switch (ext_attr->standard) {
case DRX_STANDARD_ITU_A: /* fallthrough */
case DRX_STANDARD_ITU_C: /* fallthrough */
case DRX_STANDARD_PAL_SECAM_LP: /* fallthrough */
case DRX_STANDARD_ITU_A:
case DRX_STANDARD_ITU_C:
case DRX_STANDARD_PAL_SECAM_LP:
case DRX_STANDARD_8VSB:
select_pos_image = true;
break;
@ -4787,11 +4788,12 @@ set_frequency(struct drx_demod_instance *demod,
Sound carrier is already 3Mhz above centre frequency due
to tuner setting so now add an extra shift of 1MHz... */
fm_frequency_shift = 1000;
case DRX_STANDARD_ITU_B: /* fallthrough */
case DRX_STANDARD_NTSC: /* fallthrough */
case DRX_STANDARD_PAL_SECAM_BG: /* fallthrough */
case DRX_STANDARD_PAL_SECAM_DK: /* fallthrough */
case DRX_STANDARD_PAL_SECAM_I: /* fallthrough */
/*fall through */
case DRX_STANDARD_ITU_B:
case DRX_STANDARD_NTSC:
case DRX_STANDARD_PAL_SECAM_BG:
case DRX_STANDARD_PAL_SECAM_DK:
case DRX_STANDARD_PAL_SECAM_I:
case DRX_STANDARD_PAL_SECAM_L:
select_pos_image = false;
break;

10
drivers/media/dvb-frontends/drxd_hard.c
View File

@ -1517,12 +1517,14 @@ static int SetDeviceTypeId(struct drxd_state *state)
switch (deviceId) {
case 4:
state->diversity = 1;
/* fall through */
case 3:
case 7:
state->PGA = 1;
break;
case 6:
state->diversity = 1;
/* fall through */
case 5:
case 8:
break;
@ -1969,7 +1971,8 @@ static int DRX_Start(struct drxd_state *state, s32 off)
switch (p->transmission_mode) {
default: /* Not set, detect it automatically */
operationMode |= SC_RA_RAM_OP_AUTO_MODE__M;
/* fall through , try first guess DRX_FFTMODE_8K */
/* try first guess DRX_FFTMODE_8K */
/* fall through */
case TRANSMISSION_MODE_8K:
transmissionParams |= SC_RA_RAM_OP_PARAM_MODE_8K;
if (state->type_A) {
@ -2143,8 +2146,8 @@ static int DRX_Start(struct drxd_state *state, s32 off)
switch (p->modulation) {
default:
operationMode |= SC_RA_RAM_OP_AUTO_CONST__M;
/* fall through , try first guess
DRX_CONSTELLATION_QAM64 */
/* try first guess DRX_CONSTELLATION_QAM64 */
/* fall through */
case QAM_64:
transmissionParams |= SC_RA_RAM_OP_PARAM_CONST_QAM64;
if (state->type_A) {
@ -2280,6 +2283,7 @@ static int DRX_Start(struct drxd_state *state, s32 off)
break;
default:
operationMode |= SC_RA_RAM_OP_AUTO_RATE__M;
/* fall through */
case FEC_2_3:
transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_2_3;
if (state->type_A) {

20
drivers/media/dvb-frontends/drxk_hard.c
View File

@ -3271,10 +3271,12 @@ static int dvbt_sc_command(struct drxk_state *state,
case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
status |= write16(state, OFDM_SC_RA_RAM_PARAM1__A, param1);
/* All commands using 1 parameters */
/* fall through */
case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
case OFDM_SC_RA_RAM_CMD_USER_IO:
status |= write16(state, OFDM_SC_RA_RAM_PARAM0__A, param0);
/* All commands using 0 parameters */
/* fall through */
case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
case OFDM_SC_RA_RAM_CMD_NULL:
/* Write command */
@ -3782,7 +3784,8 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
case TRANSMISSION_MODE_AUTO:
default:
operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_MODE__M;
/* fall through , try first guess DRX_FFTMODE_8K */
/* try first guess DRX_FFTMODE_8K */
/* fall through */
case TRANSMISSION_MODE_8K:
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_MODE_8K;
break;
@ -3796,7 +3799,8 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
default:
case GUARD_INTERVAL_AUTO:
operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_GUARD__M;
/* fall through , try first guess DRX_GUARD_1DIV4 */
/* try first guess DRX_GUARD_1DIV4 */
/* fall through */
case GUARD_INTERVAL_1_4:
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_4;
break;
@ -3817,9 +3821,9 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
case HIERARCHY_NONE:
default:
operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_HIER__M;
/* fall through , try first guess SC_RA_RAM_OP_PARAM_HIER_NO */
/* try first guess SC_RA_RAM_OP_PARAM_HIER_NO */
/* transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_NO; */
/* break; */
/* fall through */
case HIERARCHY_1:
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A1;
break;
@ -3837,7 +3841,8 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
case QAM_AUTO:
default:
operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_CONST__M;
/* fall through , try first guess DRX_CONSTELLATION_QAM64 */
/* try first guess DRX_CONSTELLATION_QAM64 */
/* fall through */
case QAM_64:
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64;
break;
@ -3880,7 +3885,8 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
case FEC_AUTO:
default:
operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_RATE__M;
/* fall through , try first guess DRX_CODERATE_2DIV3 */
/* try first guess DRX_CODERATE_2DIV3 */
/* fall through */
case FEC_2_3:
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3;
break;
@ -3914,7 +3920,7 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
switch (state->props.bandwidth_hz) {
case 0:
state->props.bandwidth_hz = 8000000;
/* fall though */
/* fall through */
case 8000000:
bandwidth = DRXK_BANDWIDTH_8MHZ_IN_HZ;
status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A,

1
drivers/media/dvb-frontends/mt352.c
View File

@ -211,6 +211,7 @@ static int mt352_set_parameters(struct dvb_frontend *fe)
if (op->hierarchy == HIERARCHY_AUTO ||
op->hierarchy == HIERARCHY_NONE)
break;
/* fall through */
default:
return -EINVAL;
}

4
drivers/media/dvb-frontends/or51132.c
View File

@ -493,8 +493,8 @@ static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
switch (reg&0xff) {
case 0x06:
if (reg & 0x1000) usK = 3 << 24;
/* Fall through to QAM64 case */
case 0x43:
/* fall through */
case 0x43: /* QAM64 */
c = 150204167;
break;
case 0x45:

4
drivers/media/dvb-frontends/s5h1411.c
View File

@ -51,7 +51,7 @@ static int debug;
#define dprintk(arg...) do { \
if (debug) \
printk(arg); \
} while (0)
} while (0)
/* Register values to initialise the demod, defaults to VSB */
static struct init_tab {
@ -410,7 +410,7 @@ static int s5h1411_set_if_freq(struct dvb_frontend *fe, int KHz)
default:
dprintk("%s(%d KHz) Invalid, defaulting to 5380\n",
__func__, KHz);
/* no break, need to continue */
/* fall through */
case 5380:
case 44000:
s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x1be4);

3
drivers/media/dvb-frontends/zl10353.c
View File

@ -211,7 +211,7 @@ static int zl10353_set_parameters(struct dvb_frontend *fe)
break;
default:
c->bandwidth_hz = 8000000;
/* fall though */
/* fall through */
case 8000000:
zl10353_single_write(fe, MCLK_RATIO, 0x75);
zl10353_single_write(fe, 0x64, 0x36);
@ -268,6 +268,7 @@ static int zl10353_set_parameters(struct dvb_frontend *fe)
if (c->hierarchy == HIERARCHY_AUTO ||
c->hierarchy == HIERARCHY_NONE)
break;
/* fall through */
default:
return -EINVAL;
}

1
drivers/media/i2c/msp3400-kthreads.c
View File

@ -655,6 +655,7 @@ int msp3400c_thread(void *data)
break;
case 0: /* 4.5 */
state->detected_std = V4L2_STD_MN;
/* fall-through */
default:
no_second:
state->second = msp3400c_carrier_detect_main[max1].cdo;

2
drivers/media/i2c/soc_camera/ov6650.c
View File

@ -709,6 +709,7 @@ static int ov6650_set_fmt(struct v4l2_subdev *sd,
switch (mf->code) {
case MEDIA_BUS_FMT_Y10_1X10:
mf->code = MEDIA_BUS_FMT_Y8_1X8;
/* fall through */
case MEDIA_BUS_FMT_Y8_1X8:
case MEDIA_BUS_FMT_YVYU8_2X8:
case MEDIA_BUS_FMT_YUYV8_2X8:
@ -718,6 +719,7 @@ static int ov6650_set_fmt(struct v4l2_subdev *sd,
break;
default:
mf->code = MEDIA_BUS_FMT_SBGGR8_1X8;
/* fall through */
case MEDIA_BUS_FMT_SBGGR8_1X8:
mf->colorspace = V4L2_COLORSPACE_SRGB;
break;

3
drivers/media/pci/cx23885/cx23885-cards.c
View File

@ -2081,7 +2081,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
/* break omitted intentionally */
/* fall-through */
case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@ -2238,6 +2238,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
/* Currently only enabled for the integrated IR controller */
if (!enable_885_ir)
break;
/* fall-through */
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:

2
drivers/media/pci/cx88/cx88-video.c
View File

@ -1420,7 +1420,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
request_module("rtc-isl1208");
core->i2c_rtc = i2c_new_device(&core->i2c_adap, &rtc_info);
}
/* break intentionally omitted */
/* fall-through */
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
request_module("ir-kbd-i2c");
}

7
drivers/media/pci/ddbridge/ddbridge-core.c
View File

@ -789,9 +789,10 @@ static void dvb_input_detach(struct ddb_input *input)
dvb_frontend_detach(input->fe);
input->fe = NULL;
}
/* fall-through */
case 4:
dvb_net_release(&input->dvbnet);
/* fall-through */
case 3:
dvbdemux->dmx.close(&dvbdemux->dmx);
dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
@ -799,10 +800,10 @@ static void dvb_input_detach(struct ddb_input *input)
dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
&input->mem_frontend);
dvb_dmxdev_release(&input->dmxdev);
/* fall-through */
case 2:
dvb_dmx_release(&input->demux);
/* fall-through */
case 1:
dvb_unregister_adapter(adap);
}

4
drivers/media/pci/saa7134/saa7134-cards.c
View File

@ -7806,7 +7806,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
dev->name, saa7134_boards[dev->board].name);
break;
}
/* break intentionally omitted */
/* fall-through */
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
@ -7864,7 +7864,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
hauppauge_eeprom(dev, dev->eedata+0x80);
/* break intentionally omitted */
/* fall-through */
case SAA7134_BOARD_PINNACLE_PCTV_310i:
case SAA7134_BOARD_KWORLD_DVBT_210:
case SAA7134_BOARD_TEVION_DVBT_220RF:

1
drivers/media/pci/solo6x10/solo6x10-core.c
View File

@ -511,6 +511,7 @@ static int solo_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
default:
dev_warn(&pdev->dev, "Invalid chip_id 0x%02x, assuming 4 ch\n",
chip_id);
/* fall through */
case 5:
solo_dev->nr_chans = 4;
solo_dev->nr_ext = 1;

1
drivers/media/pci/solo6x10/solo6x10-i2c.c
View File

@ -192,6 +192,7 @@ int solo_i2c_isr(struct solo_dev *solo_dev)
}
solo_dev->i2c_state = IIC_STATE_WRITE;
/* fall through */
case IIC_STATE_WRITE:
ret = solo_i2c_handle_write(solo_dev);
break;

3
drivers/media/platform/exynos4-is/fimc-capture.c
View File

@ -1277,6 +1277,7 @@ static int fimc_cap_g_selection(struct file *file, void *fh,
case V4L2_SEL_TGT_COMPOSE_DEFAULT:
case V4L2_SEL_TGT_COMPOSE_BOUNDS:
f = &ctx->d_frame;
/* fall through */
case V4L2_SEL_TGT_CROP_BOUNDS:
case V4L2_SEL_TGT_CROP_DEFAULT:
s->r.left = 0;
@ -1287,6 +1288,7 @@ static int fimc_cap_g_selection(struct file *file, void *fh,
case V4L2_SEL_TGT_COMPOSE:
f = &ctx->d_frame;
/* fall through */
case V4L2_SEL_TGT_CROP:
s->r.left = f->offs_h;
s->r.top = f->offs_v;
@ -1610,6 +1612,7 @@ static int fimc_subdev_get_selection(struct v4l2_subdev *sd,
switch (sel->target) {
case V4L2_SEL_TGT_COMPOSE_BOUNDS:
f = &ctx->d_frame;
/* fall through */
case V4L2_SEL_TGT_CROP_BOUNDS:
r->width = f->o_width;
r->height = f->o_height;

1
drivers/media/platform/marvell-ccic/mcam-core.c
View File

@ -393,6 +393,7 @@ static int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime)
dma_free_coherent(cam->dev, cam->dma_buf_size,
cam->dma_bufs[0], cam->dma_handles[0]);
cam->nbufs = 0;
/* fall-through */
case 0:
cam_err(cam, "Insufficient DMA buffers, cannot operate\n");
return -ENOMEM;

1
drivers/media/platform/pxa_camera.c
View File

@ -1291,6 +1291,7 @@ static void pxa_camera_setup_cicr(struct pxa_camera_dev *pcdev,
* transformation. Note that UYVY is the only format that
* should be used if pxa framebuffer Overlay2 is used.
*/
/* fall through */
case V4L2_PIX_FMT_UYVY:
case V4L2_PIX_FMT_VYUY:
case V4L2_PIX_FMT_YUYV:

2
drivers/media/platform/sh_vou.c
View File

@ -229,6 +229,7 @@ static void sh_vou_stream_config(struct sh_vou_device *vou_dev)
break;
case V4L2_PIX_FMT_RGB565:
dataswap ^= 1;
/* fall through */
case V4L2_PIX_FMT_RGB565X:
row_coeff = 2;
break;
@ -815,6 +816,7 @@ static u32 sh_vou_ntsc_mode(enum sh_vou_bus_fmt bus_fmt)
default:
pr_warn("%s(): Invalid bus-format code %d, using default 8-bit\n",
__func__, bus_fmt);
/* fall through */
case SH_VOU_BUS_8BIT:
return 1;
case SH_VOU_BUS_16BIT:

1
drivers/media/rc/iguanair.c
View File

@ -113,6 +113,7 @@ static void process_ir_data(struct iguanair *ir, unsigned len)
break;
case CMD_TX_OVERFLOW:
ir->tx_overflow = true;
/* fall through */
case CMD_RECEIVER_OFF:
case CMD_RECEIVER_ON:
case CMD_SEND:

2
drivers/media/tuners/tda18271-fe.c
View File

@ -960,7 +960,7 @@ static int tda18271_set_params(struct dvb_frontend *fe)
break;
case SYS_DVBC_ANNEX_B:
bw = 6000000;
/* falltrough */
/* fall through */
case SYS_DVBC_ANNEX_A:
case SYS_DVBC_ANNEX_C:
if (bw <= 6000000) {

1
drivers/media/tuners/xc5000.c
View File

@ -788,6 +788,7 @@ static int xc5000_set_digital_params(struct dvb_frontend *fe)
if (!bw)
bw = 6000000;
/* fall to OFDM handling */
/* fall through */
case SYS_DMBTH:
case SYS_DVBT:
case SYS_DVBT2:

51
drivers/media/usb/cpia2/cpia2_core.c
View File

@ -173,7 +173,8 @@ int cpia2_do_command(struct camera_data *cam,
cmd.start = CPIA2_VP_DEVICEH;
break;
case CPIA2_CMD_SET_VP_BRIGHTNESS:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_VP_BRIGHTNESS:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;
@ -183,14 +184,16 @@ int cpia2_do_command(struct camera_data *cam,
cmd.start = CPIA2_VP5_EXPOSURE_TARGET;
break;
case CPIA2_CMD_SET_CONTRAST:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_CONTRAST:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;
cmd.start = CPIA2_VP_YRANGE;
break;
case CPIA2_CMD_SET_VP_SATURATION:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_VP_SATURATION:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;
@ -200,28 +203,32 @@ int cpia2_do_command(struct camera_data *cam,
cmd.start = CPIA2_VP5_MCUVSATURATION;
break;
case CPIA2_CMD_SET_VP_GPIO_DATA:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_VP_GPIO_DATA:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;
cmd.start = CPIA2_VP_GPIO_DATA;
break;
case CPIA2_CMD_SET_VP_GPIO_DIRECTION:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_VP_GPIO_DIRECTION:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;
cmd.start = CPIA2_VP_GPIO_DIRECTION;
break;
case CPIA2_CMD_SET_VC_MP_GPIO_DATA:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_VC_MP_GPIO_DATA:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
cmd.reg_count = 1;
cmd.start = CPIA2_VC_MP_DATA;
break;
case CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/*fall through */
case CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
cmd.reg_count = 1;
@ -235,7 +242,8 @@ int cpia2_do_command(struct camera_data *cam,
cmd.buffer.block_data[0] = param;
break;
case CPIA2_CMD_SET_FLICKER_MODES:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_FLICKER_MODES:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;
@ -280,8 +288,9 @@ int cpia2_do_command(struct camera_data *cam,
cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL;
cmd.buffer.block_data[0] = CPIA2_SYSTEM_CONTROL_CLEAR_ERR;
break;
case CPIA2_CMD_SET_USER_MODE: /* Then fall through */
case CPIA2_CMD_SET_USER_MODE:
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_USER_MODE:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;
@ -300,14 +309,16 @@ int cpia2_do_command(struct camera_data *cam,
cmd.buffer.block_data[0] = param;
break;
case CPIA2_CMD_SET_WAKEUP:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_WAKEUP:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
cmd.reg_count = 1;
cmd.start = CPIA2_VC_WAKEUP;
break;
case CPIA2_CMD_SET_PW_CONTROL:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_PW_CONTROL:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
cmd.reg_count = 1;
@ -319,7 +330,8 @@ int cpia2_do_command(struct camera_data *cam,
cmd.start = CPIA2_VP_SYSTEMSTATE;
break;
case CPIA2_CMD_SET_SYSTEM_CTRL:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_SYSTEM_CTRL:
cmd.req_mode =
CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM;
@ -327,21 +339,24 @@ int cpia2_do_command(struct camera_data *cam,
cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL;
break;
case CPIA2_CMD_SET_VP_SYSTEM_CTRL:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_VP_SYSTEM_CTRL:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;
cmd.start = CPIA2_VP_SYSTEMCTRL;
break;
case CPIA2_CMD_SET_VP_EXP_MODES:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_VP_EXP_MODES:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;
cmd.start = CPIA2_VP_EXPOSURE_MODES;
break;
case CPIA2_CMD_SET_DEVICE_CONFIG:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_DEVICE_CONFIG:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;
@ -361,7 +376,8 @@ int cpia2_do_command(struct camera_data *cam,
cmd.start = CPIA2_SENSOR_CR1;
break;
case CPIA2_CMD_SET_VC_CONTROL:
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_VC_CONTROL:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
cmd.reg_count = 1;
@ -395,7 +411,8 @@ int cpia2_do_command(struct camera_data *cam,
case CPIA2_CMD_SET_USER_EFFECTS: /* Note: Be careful with this as
this register can also affect
flicker modes */
cmd.buffer.block_data[0] = param; /* Then fall through */
cmd.buffer.block_data[0] = param;
/* fall through */
case CPIA2_CMD_GET_USER_EFFECTS:
cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
cmd.reg_count = 1;

2
drivers/media/usb/cx231xx/cx231xx-video.c
View File

@ -1134,7 +1134,7 @@ void cx231xx_v4l2_create_entities(struct cx231xx *dev)
/* The DVB core will handle it */
if (dev->tuner_type == TUNER_ABSENT)
continue;
/* fall though */
/* fall through */
default: /* just to shut up a gcc warning */
ent->function = MEDIA_ENT_F_CONN_RF;
break;

1
drivers/media/usb/dvb-usb-v2/af9015.c
View File

@ -52,6 +52,7 @@ static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
case READ_I2C:
write = 0;
state->buf[2] |= 0x01; /* set I2C direction */
/* fall through */
case WRITE_I2C:
state->buf[0] = READ_WRITE_I2C;
break;

1
drivers/media/usb/dvb-usb-v2/lmedm04.c
View File

@ -1065,6 +1065,7 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
}
break;
}
/* fall through */
case 0x22f0:
st->i2c_gate = 5;
adap->fe[0] = dvb_attach(m88rs2000_attach,

1
drivers/media/usb/dvb-usb/dib0700_devices.c
View File

@ -1659,6 +1659,7 @@ static int dib8096_set_param_override(struct dvb_frontend *fe)
switch (band) {
default:
deb_info("Warning : Rf frequency (%iHz) is not in the supported range, using VHF switch ", fe->dtv_property_cache.frequency);
/* fall through */
case BAND_VHF:
state->dib8000_ops.set_gpio(fe, 3, 0, 1);
break;

4
drivers/media/usb/dvb-usb/dw2102.c
View File

@ -1840,11 +1840,12 @@ static int dw2102_load_firmware(struct usb_device *dev,
switch (le16_to_cpu(dev->descriptor.idProduct)) {
case USB_PID_TEVII_S650:
dw2104_properties.rc.core.rc_codes = RC_MAP_TEVII_NEC;
/* fall through */
case USB_PID_DW2104:
reset = 1;
dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
DW210X_WRITE_MSG);
/* break omitted intentionally */
/* fall through */
case USB_PID_DW3101:
reset = 0;
dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
@ -1877,6 +1878,7 @@ static int dw2102_load_firmware(struct usb_device *dev,
break;
}
}
/* fall through */
case 0x2101:
dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2,
DW210X_READ_MSG);

3
drivers/media/usb/gspca/ov519.c
View File

@ -3526,7 +3526,8 @@ static void ov511_mode_init_regs(struct sd *sd)
sd->clockdiv = 0;
break;
}
/* Fall through for 640x480 case */
/* For 640x480 case */
/* fall through */
default:
/* case 20: */
/* case 15: */

3
drivers/media/usb/pwc/pwc-v4l.c
View File

@ -568,7 +568,8 @@ static int pwc_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
pdev->gain_valid = true;
if (!DEVICE_USE_CODEC3(pdev->type))
break;
/* Fall through for CODEC3 where autogain also controls expo */
/* For CODEC3 where autogain also controls expo */
/* fall through */
case V4L2_CID_EXPOSURE_AUTO:
if (pdev->exposure_valid && time_before(jiffies,
pdev->last_exposure_update + HZ / 4)) {

3
drivers/media/usb/usbvision/usbvision-i2c.c
View File

@ -311,10 +311,13 @@ usbvision_i2c_read_max4(struct usb_usbvision *usbvision, unsigned char addr,
switch (len) {
case 4:
buf[3] = usbvision_read_reg(usbvision, USBVISION_SER_DAT4);
/* fall through */
case 3:
buf[2] = usbvision_read_reg(usbvision, USBVISION_SER_DAT3);
/* fall through */
case 2:
buf[1] = usbvision_read_reg(usbvision, USBVISION_SER_DAT2);
/* fall through */
case 1:
buf[0] = usbvision_read_reg(usbvision, USBVISION_SER_DAT1);
break;

2
drivers/media/usb/uvc/uvc_video.c
View File

@ -1327,7 +1327,7 @@ static void uvc_video_complete(struct urb *urb)
case -ENOENT: /* usb_kill_urb() called. */
if (stream->frozen)
return;
/* fall through */
case -ECONNRESET: /* usb_unlink_urb() called. */
case -ESHUTDOWN: /* The endpoint is being disabled. */
uvc_queue_cancel(queue, urb->status == -ESHUTDOWN);