openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

ARM: SoC fixes for 4.4-rc 

Here are a bunch of small bug fixes for various ARM platforms, nothing
 really sticks out this week, most of either fixes bugs in code that was
 just added in 4.4, or that has been broken for many years without anyone
 noticing.
 
 at91/sama5d2
 - fix sama5de hardware setup of sd/mmc interface
 - proper selection of pinctrl drivers. PIO4 is necessary for sama5d2
 
 berlin
 - fix incorrect clock input for SDIO
 
 exynos
 - Fix potential NULL pointer dereference in Exynos PMU driver.
 
 imx
 - Fix vf610 SAI clock configuration bug which is discovered by
   the newly added master mode support in SAI audio driver.
 - Fix buggy L2 cache latency values in vf610 device trees, which may
   cause system hang when cpu runs at a higher frequency.
 
 ixp4xx
 - fix prototypes for readl/writel functions
 
 ls2080a
 - use little-endian register access for GPIO and SDHCI
 
 omap
 - Fix clock source for ARM TWD and global timers on am437x
 - Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of
   when MACH_OMAP3_PANDORA is selected
 - Fix SPI DMA handles for dm816x as only some were mapped
 - Fix up mbox cells for dm816x to make mailbox usable
 
 pxa
 - use PWM lookup table for all ezx machines
 
 s3c24xx
 - Remove incorrect __init annotation from s3c24xx cpufreq driver structures.
 
 versatile
 - fix PCI IRQ mapping on Versatile PB
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVmyQMWCrR//JCVInAQIIDA//VyJ2UoTJ2JC3thVP56P/ZXh7Pz8VDqnq
 cgoFUio27IeHPSgs+W9qWliOrb+LaXkuOl8CKgepm+Bv7j8Y+uryP4X2rKQ3ZRmy
 2f5+uUqAIZ0Co2aJdtG395lY9TKNHl6cPEskcbgL7cjdgj7QBqfIyj22QZbj6yRp
 kp8pj+cKXBFRLa5PvePon2w03MA/bLaP30VzKCSL1zchcs52rxekU694V3ISNa63
 eshyyKf354Sl9hP4Y8xCdl/mboymKzQxEGDQS/Fcb8h/OQ3djoh+7EKdVbdyZ2A7
 phgfazd2aE7wQ5GVIkMNV/MzGHj9xpiD4Z1Hi/2E8WdzuXJTRicS4bJihRAIualt
 H1FOEdgqT+xS4JUYxAvl46fwwqcFJfixtGgKka27sJTtk+Y1kHjASWvueZKlHMIK
 ln9CF7PoecF0InQaY2N8Vy05Qcp5MuoB/0v+XlftI0sAtIXNeo142H2NQZCsO+1U
 bJDyb5E4z06jzqk7IOK4/AKyEAV9KZPDws+ZxcNH/faPT10epK7MeZdetbD7b8q3
 pkY7s5iXV8uBox7FtHoamrlMFgAzN9Qh0E4bcw70aKaJZZ02ozTXCvJIKjoIPMne
 FsvidQToznqbA2RSXpxRQrcXrMxvURaPCRBe7CxrCoynmhIxd4UHND2HJ4OG645z
 4SAGOzOlZKM=
 =fgEd
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a bunch of small bug fixes for various ARM platforms, nothing
  really sticks out this week, most of either fixes bugs in code that
  was just added in 4.4, or that has been broken for many years without
  anyone noticing.

  at91/sama5d2:
   - fix sama5de hardware setup of sd/mmc interface
   - proper selection of pinctrl drivers.  PIO4 is necessary for sama5d2

  berlin:
   - fix incorrect clock input for SDIO

  exynos:
   - Fix potential NULL pointer dereference in Exynos PMU driver.

  imx:
   - Fix vf610 SAI clock configuration bug which is discovered by the
     newly added master mode support in SAI audio driver.
   - Fix buggy L2 cache latency values in vf610 device trees, which may
     cause system hang when cpu runs at a higher frequency.

  ixp4xx:
   - fix prototypes for readl/writel functions

  ls2080a:
   - use little-endian register access for GPIO and SDHCI

  omap:
   - Fix clock source for ARM TWD and global timers on am437x
   - Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when
     MACH_OMAP3_PANDORA is selected
   - Fix SPI DMA handles for dm816x as only some were mapped
   - Fix up mbox cells for dm816x to make mailbox usable

  pxa:
   - use PWM lookup table for all ezx machines

  s3c24xx:
   - Remove incorrect __init annotation from s3c24xx cpufreq driver
     structures.

  versatile:
   - fix PCI IRQ mapping on Versatile PB"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ls2080a/dts: Add little endian property for GPIO IP block
  dt-bindings: define little-endian property for QorIQ GPIO
  ARM64: dts: ls2080a: fix eSDHC endianness
  ARM: dts: vf610: use reset values for L2 cache latencies
  ARM: pxa: use PWM lookup table for all machines
  ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1
  ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock
  ARM: dts: am4372: fix clock source for arm twd and global timers
  ARM: at91: fix pinctrl driver selection
  ARM: at91/dt: add always-on to 1.8V regulator
  ARM: dts: vf610: fix clock definition for SAI2
  ARM: imx: clk-vf610: fix SAI clock tree
  ARM: ixp4xx: fix read{b,w,l} return types
  irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB
  ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE
  ARM: dts: add dm816x missing spi DT dma handles
  ARM: dts: add dm816x missing #mbox-cells
  cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init
  ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf
This commit is contained in:
Linus Torvalds 2015-12-12 16:43:44 -08:00
parent 79dbddaf8e 7f4c977849
commit 097b285d32
21 changed files with 76 additions and 32 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
View File

@ -11,6 +11,10 @@ Required properties:
0 = active high
1 = active low
Optional properties:
- little-endian : GPIO registers are used as little endian. If not
present registers are used as big endian by default.
Example:
gpio0: gpio@1100 {

4
arch/arm/boot/dts/am4372.dtsi
View File

@ -74,7 +74,7 @@ global_timer: timer@48240200 {
reg = <0x48240200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&dpll_mpu_m2_ck>;
clocks = <&mpu_periphclk>;
};
local_timer: timer@48240600 {
@ -82,7 +82,7 @@ local_timer: timer@48240600 {
reg = <0x48240600 0x100>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&dpll_mpu_m2_ck>;
clocks = <&mpu_periphclk>;
};
l2-cache-controller@48242000 {

8
arch/arm/boot/dts/am43xx-clocks.dtsi
View File

@ -259,6 +259,14 @@ dpll_mpu_m2_ck: dpll_mpu_m2_ck {
ti,invert-autoidle-bit;
};
mpu_periphclk: mpu_periphclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&dpll_mpu_m2_ck>;
clock-mult = <1>;
clock-div = <2>;
};
dpll_ddr_ck: dpll_ddr_ck {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";

1
arch/arm/boot/dts/at91-sama5d2_xplained.dts
View File

@ -184,6 +184,7 @@ vdd_sdhc_1v8_reg: LDO_REG4 {
regulator-name = "VDD_SDHC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
};
};

8
arch/arm/boot/dts/berlin2q.dtsi
View File

@ -118,7 +118,8 @@ pmu {
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
clocks = <&chip_clk CLKID_SDIO1XIN>;
clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
clock-names = "io", "core";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@ -126,7 +127,8 @@ sdhci0: sdhci@ab0000 {
sdhci1: sdhci@ab0800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
clocks = <&chip_clk CLKID_SDIO1XIN>;
clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
clock-names = "io", "core";
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@ -135,7 +137,7 @@ sdhci2: sdhci@ab1000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>;
clock-names = "io", "core";
status = "disabled";
};

8
arch/arm/boot/dts/dm816x.dtsi
View File

@ -218,6 +218,7 @@ mailbox: mailbox@480c8000 {
reg = <0x480c8000 0x2000>;
interrupts = <77>;
ti,hwmods = "mailbox";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
mbox_dsp: mbox_dsp {
@ -279,8 +280,11 @@ mcspi1: spi@48030000 {
ti,spi-num-cs = <4>;
ti,hwmods = "mcspi1";
dmas = <&edma 16 &edma 17
&edma 18 &edma 19>;
dma-names = "tx0", "rx0", "tx1", "rx1";
&edma 18 &edma 19
&edma 20 &edma 21
&edma 22 &edma 23>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
};
mmc1: mmc@48060000 {

5
arch/arm/boot/dts/vf610-colibri.dtsi
View File

@ -18,8 +18,3 @@ memory {
reg = <0x80000000 0x10000000>;
};
};
&L2 {
arm,data-latency = <2 1 2>;
arm,tag-latency = <3 2 3>;
};

2
arch/arm/boot/dts/vf610.dtsi
View File

@ -19,7 +19,7 @@ L2: l2-cache@40006000 {
reg = <0x40006000 0x1000>;
cache-unified;
cache-level = <2>;
arm,data-latency = <1 1 1>;
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
};
};

6
arch/arm/boot/dts/vfxxx.dtsi
View File

@ -178,8 +178,10 @@ sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI2>;
clock-names = "sai";
clocks = <&clks VF610_CLK_SAI2>,
<&clks VF610_CLK_SAI2_DIV>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 0 21>,
<&edma0 0 20>;

6
arch/arm/mach-at91/Kconfig
View File

@ -4,7 +4,6 @@ menuconfig ARCH_AT91
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK_AT91
select PINCTRL
select PINCTRL_AT91
select SOC_BUS
if ARCH_AT91
@ -17,6 +16,7 @@ config SOC_SAMA5D2
select HAVE_AT91_USB_CLK
select HAVE_AT91_H32MX
select HAVE_AT91_GENERATED_CLK
select PINCTRL_AT91PIO4
help
Select this if ou are using one of Atmel's SAMA5D2 family SoC.
@ -27,6 +27,7 @@ config SOC_SAMA5D3
select HAVE_AT91_UTMI
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
select PINCTRL_AT91
help
Select this if you are using one of Atmel's SAMA5D3 family SoC.
This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
@ -40,6 +41,7 @@ config SOC_SAMA5D4
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
select HAVE_AT91_H32MX
select PINCTRL_AT91
help
Select this if you are using one of Atmel's SAMA5D4 family SoC.
@ -50,6 +52,7 @@ config SOC_AT91RM9200
select CPU_ARM920T
select HAVE_AT91_USB_CLK
select MIGHT_HAVE_PCI
select PINCTRL_AT91
select SOC_SAM_V4_V5
select SRAM if PM
help
@ -65,6 +68,7 @@ config SOC_AT91SAM9
select HAVE_AT91_UTMI
select HAVE_FB_ATMEL
select MEMORY
select PINCTRL_AT91
select SOC_SAM_V4_V5
select SRAM if PM
help

7
arch/arm/mach-at91/pm.c
View File

@ -41,8 +41,10 @@
* implementation should be moved down into the pinctrl driver and get
* called as part of the generic suspend/resume path.
*/
#ifdef CONFIG_PINCTRL_AT91
extern void at91_pinctrl_gpio_suspend(void);
extern void at91_pinctrl_gpio_resume(void);
#endif
static struct {
unsigned long uhp_udp_mask;
@ -151,8 +153,9 @@ static void at91_pm_suspend(suspend_state_t state)
static int at91_pm_enter(suspend_state_t state)
{
#ifdef CONFIG_PINCTRL_AT91
at91_pinctrl_gpio_suspend();
#endif
switch (state) {
/*
* Suspend-to-RAM is like STANDBY plus slow clock mode, so
@ -192,7 +195,9 @@ static int at91_pm_enter(suspend_state_t state)
error:
target_state = PM_SUSPEND_ON;
#ifdef CONFIG_PINCTRL_AT91
at91_pinctrl_gpio_resume();
#endif
return 0;
}

6
arch/arm/mach-exynos/pmu.c
View File

@ -748,8 +748,12 @@ static void exynos5_powerdown_conf(enum sys_powerdown mode)
void exynos_sys_powerdown_conf(enum sys_powerdown mode)
{
unsigned int i;
const struct exynos_pmu_data *pmu_data;
const struct exynos_pmu_data *pmu_data = pmu_context->pmu_data;
if (!pmu_context)
return;
pmu_data = pmu_context->pmu_data;
if (pmu_data->powerdown_conf)
pmu_data->powerdown_conf(mode);

12
arch/arm/mach-ixp4xx/include/mach/io.h
View File

@ -143,7 +143,7 @@ static inline void __indirect_writesl(volatile void __iomem *bus_addr,
writel(*vaddr++, bus_addr);
}
static inline unsigned char __indirect_readb(const volatile void __iomem *p)
static inline u8 __indirect_readb(const volatile void __iomem *p)
{
u32 addr = (u32)p;
u32 n, byte_enables, data;
@ -166,7 +166,7 @@ static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
*vaddr++ = readb(bus_addr);
}
static inline unsigned short __indirect_readw(const volatile void __iomem *p)
static inline u16 __indirect_readw(const volatile void __iomem *p)
{
u32 addr = (u32)p;
u32 n, byte_enables, data;
@ -189,7 +189,7 @@ static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
*vaddr++ = readw(bus_addr);
}
static inline unsigned long __indirect_readl(const volatile void __iomem *p)
static inline u32 __indirect_readl(const volatile void __iomem *p)
{
u32 addr = (__force u32)p;
u32 data;
@ -350,7 +350,7 @@ static inline void insl(u32 io_addr, void *p, u32 count)
((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
#define ioread8(p) ioread8(p)
static inline unsigned int ioread8(const void __iomem *addr)
static inline u8 ioread8(const void __iomem *addr)
{
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port))
@ -378,7 +378,7 @@ static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
}
#define ioread16(p) ioread16(p)
static inline unsigned int ioread16(const void __iomem *addr)
static inline u16 ioread16(const void __iomem *addr)
{
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port))
@ -407,7 +407,7 @@ static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
}
#define ioread32(p) ioread32(p)
static inline unsigned int ioread32(const void __iomem *addr)
static inline u32 ioread32(const void __iomem *addr)
{
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port))

2
arch/arm/mach-omap2/Kconfig
View File

@ -121,6 +121,7 @@ config ARCH_OMAP2PLUS_TYPICAL
select NEON if CPU_V7
select PM
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select VFP
@ -201,7 +202,6 @@ config MACH_OMAP3_PANDORA
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_NOKIA_N810
bool

5
arch/arm/mach-pxa/ezx.c
View File

@ -889,6 +889,7 @@ static void __init e680_init(void)
pxa_set_keypad_info(&e680_keypad_platform_data);
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(e680_devices));
}
@ -956,6 +957,7 @@ static void __init a1200_init(void)
pxa_set_keypad_info(&a1200_keypad_platform_data);
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
}
@ -1148,6 +1150,7 @@ static void __init a910_init(void)
platform_device_register(&a910_camera);
}
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a910_devices));
}
@ -1215,6 +1218,7 @@ static void __init e6_init(void)
pxa_set_keypad_info(&e6_keypad_platform_data);
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(e6_devices));
}
@ -1256,6 +1260,7 @@ static void __init e2_init(void)
pxa_set_keypad_info(&e2_keypad_platform_data);
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(e2_devices));
}

2
arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
View File

@ -20,7 +20,7 @@
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
static struct cpufreq_frequency_table s3c2440_plls_12[] = {
{ .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */
{ .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */
{ .frequency = 90000000, .driver_data = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */

2
arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
View File

@ -20,7 +20,7 @@
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
{ .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */
{ .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */
{ .frequency = 90115200, .driver_data = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */

5
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
View File

@ -269,6 +269,7 @@ esdhc: esdhc@2140000 {
clock-frequency = <0>; /* Updated by bootloader */
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
bus-width = <4>;
};
@ -277,6 +278,7 @@ gpio0: gpio@2300000 {
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <0 36 0x4>; /* Level high type */
gpio-controller;
little-endian;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@ -287,6 +289,7 @@ gpio1: gpio@2310000 {
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <0 36 0x4>; /* Level high type */
gpio-controller;
little-endian;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@ -297,6 +300,7 @@ gpio2: gpio@2320000 {
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <0 37 0x4>; /* Level high type */
gpio-controller;
little-endian;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@ -307,6 +311,7 @@ gpio3: gpio@2330000 {
reg = <0x0 0x2330000 0x0 0x10000>;
interrupts = <0 37 0x4>; /* Level high type */
gpio-controller;
little-endian;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;

8
drivers/clk/imx/clk-vf610.c
View File

@ -335,22 +335,22 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_SAI0_SEL] = imx_clk_mux("sai0_sel", CCM_CSCMR1, 0, 2, sai_sels, 4);
clk[VF610_CLK_SAI0_EN] = imx_clk_gate("sai0_en", "sai0_sel", CCM_CSCDR1, 16);
clk[VF610_CLK_SAI0_DIV] = imx_clk_divider("sai0_div", "sai0_en", CCM_CSCDR1, 0, 4);
clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "sai0_div", CCM_CCGR0, CCM_CCGRx_CGn(15));
clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(15));
clk[VF610_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", CCM_CSCMR1, 2, 2, sai_sels, 4);
clk[VF610_CLK_SAI1_EN] = imx_clk_gate("sai1_en", "sai1_sel", CCM_CSCDR1, 17);
clk[VF610_CLK_SAI1_DIV] = imx_clk_divider("sai1_div", "sai1_en", CCM_CSCDR1, 4, 4);
clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "sai1_div", CCM_CCGR1, CCM_CCGRx_CGn(0));
clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(0));
clk[VF610_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", CCM_CSCMR1, 4, 2, sai_sels, 4);
clk[VF610_CLK_SAI2_EN] = imx_clk_gate("sai2_en", "sai2_sel", CCM_CSCDR1, 18);
clk[VF610_CLK_SAI2_DIV] = imx_clk_divider("sai2_div", "sai2_en", CCM_CSCDR1, 8, 4);
clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "sai2_div", CCM_CCGR1, CCM_CCGRx_CGn(1));
clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(1));
clk[VF610_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", CCM_CSCMR1, 6, 2, sai_sels, 4);
clk[VF610_CLK_SAI3_EN] = imx_clk_gate("sai3_en", "sai3_sel", CCM_CSCDR1, 19);
clk[VF610_CLK_SAI3_DIV] = imx_clk_divider("sai3_div", "sai3_en", CCM_CSCDR1, 12, 4);
clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "sai3_div", CCM_CCGR1, CCM_CCGRx_CGn(2));
clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(2));
clk[VF610_CLK_NFC_SEL] = imx_clk_mux("nfc_sel", CCM_CSCMR1, 12, 2, nfc_sels, 4);
clk[VF610_CLK_NFC_EN] = imx_clk_gate("nfc_en", "nfc_sel", CCM_CSCDR2, 9);

2
drivers/cpufreq/s3c24xx-cpufreq.c
View File

@ -648,7 +648,7 @@ late_initcall(s3c_cpufreq_initcall);
*
* Register the given set of PLLs with the system.
*/
int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
int s3c_plltab_register(struct cpufreq_frequency_table *plls,
unsigned int plls_no)
{
struct cpufreq_frequency_table *vals;

5
drivers/irqchip/irq-versatile-fpga.c
View File

@ -210,7 +210,12 @@ int __init fpga_irq_of_init(struct device_node *node,
parent_irq = -1;
}
#ifdef CONFIG_ARCH_VERSATILE
fpga_irq_init(base, node->name, IRQ_SIC_START, parent_irq, valid_mask,
node);
#else
fpga_irq_init(base, node->name, 0, parent_irq, valid_mask, node);
#endif
writel(clear_mask, base + IRQ_ENABLE_CLEAR);
writel(clear_mask, base + FIQ_ENABLE_CLEAR);