openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge branch 'ioat' into dmaengine

This commit is contained in:
Dan Williams 2010-05-17 16:30:58 -07:00
parent 058276303d caa20d974c
commit 0b28330e39
4782 changed files with 30306 additions and 7951 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

0
Documentation/PCI/PCI-DMA-mapping.txt → Documentation/DMA-API-HOWTO.txt
View File

13
Documentation/DocBook/tracepoint.tmpl
View File

@ -16,6 +16,15 @@
</address>
</affiliation>
</author>
<author>
<firstname>William</firstname>
<surname>Cohen</surname>
<affiliation>
<address>
<email>wcohen@redhat.com</email>
</address>
</affiliation>
</author>
</authorgroup>
<legalnotice>
@ -91,4 +100,8 @@
!Iinclude/trace/events/signal.h
</chapter>
<chapter id="block">
<title>Block IO</title>
!Iinclude/trace/events/block.h
</chapter>
</book>

4
Documentation/block/biodoc.txt
View File

@ -1162,8 +1162,8 @@ where a driver received a request ala this before:
As mentioned, there is no virtual mapping of a bio. For DMA, this is
not a problem as the driver probably never will need a virtual mapping.
Instead it needs a bus mapping (pci_map_page for a single segment or
use blk_rq_map_sg for scatter gather) to be able to ship it to the driver. For
Instead it needs a bus mapping (dma_map_page for a single segment or
use dma_map_sg for scatter gather) to be able to ship it to the driver. For
PIO drivers (or drivers that need to revert to PIO transfer once in a
while (IDE for example)), where the CPU is doing the actual data
transfer a virtual mapping is needed. If the driver supports highmem I/O,

2
Documentation/cgroups/memory.txt
View File

@ -340,7 +340,7 @@ Note:
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
Following cgroups' swapiness can't be changed.
Following cgroups' swappiness can't be changed.
- root cgroup (uses /proc/sys/vm/swappiness).
- a cgroup which uses hierarchy and it has child cgroup.
- a cgroup which uses hierarchy and not the root of hierarchy.

234
Documentation/circular-buffers.txt Normal file
View File

@ -0,0 +1,234 @@
================
CIRCULAR BUFFERS
================
By: David Howells <dhowells@redhat.com>
Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Linux provides a number of features that can be used to implement circular
buffering. There are two sets of such features:
(1) Convenience functions for determining information about power-of-2 sized
buffers.
(2) Memory barriers for when the producer and the consumer of objects in the
buffer don't want to share a lock.
To use these facilities, as discussed below, there needs to be just one
producer and just one consumer. It is possible to handle multiple producers by
serialising them, and to handle multiple consumers by serialising them.
Contents:
(*) What is a circular buffer?
(*) Measuring power-of-2 buffers.
(*) Using memory barriers with circular buffers.
- The producer.
- The consumer.
==========================
WHAT IS A CIRCULAR BUFFER?
==========================
First of all, what is a circular buffer? A circular buffer is a buffer of
fixed, finite size into which there are two indices:
(1) A 'head' index - the point at which the producer inserts items into the
buffer.
(2) A 'tail' index - the point at which the consumer finds the next item in
the buffer.
Typically when the tail pointer is equal to the head pointer, the buffer is
empty; and the buffer is full when the head pointer is one less than the tail
pointer.
The head index is incremented when items are added, and the tail index when
items are removed. The tail index should never jump the head index, and both
indices should be wrapped to 0 when they reach the end of the buffer, thus
allowing an infinite amount of data to flow through the buffer.
Typically, items will all be of the same unit size, but this isn't strictly
required to use the techniques below. The indices can be increased by more
than 1 if multiple items or variable-sized items are to be included in the
buffer, provided that neither index overtakes the other. The implementer must
be careful, however, as a region more than one unit in size may wrap the end of
the buffer and be broken into two segments.
============================
MEASURING POWER-OF-2 BUFFERS
============================
Calculation of the occupancy or the remaining capacity of an arbitrarily sized
circular buffer would normally be a slow operation, requiring the use of a
modulus (divide) instruction. However, if the buffer is of a power-of-2 size,
then a much quicker bitwise-AND instruction can be used instead.
Linux provides a set of macros for handling power-of-2 circular buffers. These
can be made use of by:
#include <linux/circ_buf.h>
The macros are:
(*) Measure the remaining capacity of a buffer:
CIRC_SPACE(head_index, tail_index, buffer_size);
This returns the amount of space left in the buffer[1] into which items
can be inserted.
(*) Measure the maximum consecutive immediate space in a buffer:
CIRC_SPACE_TO_END(head_index, tail_index, buffer_size);
This returns the amount of consecutive space left in the buffer[1] into
which items can be immediately inserted without having to wrap back to the
beginning of the buffer.
(*) Measure the occupancy of a buffer:
CIRC_CNT(head_index, tail_index, buffer_size);
This returns the number of items currently occupying a buffer[2].
(*) Measure the non-wrapping occupancy of a buffer:
CIRC_CNT_TO_END(head_index, tail_index, buffer_size);
This returns the number of consecutive items[2] that can be extracted from
the buffer without having to wrap back to the beginning of the buffer.
Each of these macros will nominally return a value between 0 and buffer_size-1,
however:
[1] CIRC_SPACE*() are intended to be used in the producer. To the producer
they will return a lower bound as the producer controls the head index,
but the consumer may still be depleting the buffer on another CPU and
moving the tail index.
To the consumer it will show an upper bound as the producer may be busy
depleting the space.
[2] CIRC_CNT*() are intended to be used in the consumer. To the consumer they
will return a lower bound as the consumer controls the tail index, but the
producer may still be filling the buffer on another CPU and moving the
head index.
To the producer it will show an upper bound as the consumer may be busy
emptying the buffer.
[3] To a third party, the order in which the writes to the indices by the
producer and consumer become visible cannot be guaranteed as they are
independent and may be made on different CPUs - so the result in such a
situation will merely be a guess, and may even be negative.
===========================================
USING MEMORY BARRIERS WITH CIRCULAR BUFFERS
===========================================
By using memory barriers in conjunction with circular buffers, you can avoid
the need to:
(1) use a single lock to govern access to both ends of the buffer, thus
allowing the buffer to be filled and emptied at the same time; and
(2) use atomic counter operations.
There are two sides to this: the producer that fills the buffer, and the
consumer that empties it. Only one thing should be filling a buffer at any one
time, and only one thing should be emptying a buffer at any one time, but the
two sides can operate simultaneously.
THE PRODUCER
------------
The producer will look something like this:
spin_lock(&producer_lock);
unsigned long head = buffer->head;
unsigned long tail = ACCESS_ONCE(buffer->tail);
if (CIRC_SPACE(head, tail, buffer->size) >= 1) {
/* insert one item into the buffer */
struct item *item = buffer[head];
produce_item(item);
smp_wmb(); /* commit the item before incrementing the head */
buffer->head = (head + 1) & (buffer->size - 1);
/* wake_up() will make sure that the head is committed before
* waking anyone up */
wake_up(consumer);
}
spin_unlock(&producer_lock);
This will instruct the CPU that the contents of the new item must be written
before the head index makes it available to the consumer and then instructs the
CPU that the revised head index must be written before the consumer is woken.
Note that wake_up() doesn't have to be the exact mechanism used, but whatever
is used must guarantee a (write) memory barrier between the update of the head
index and the change of state of the consumer, if a change of state occurs.
THE CONSUMER
------------
The consumer will look something like this:
spin_lock(&consumer_lock);
unsigned long head = ACCESS_ONCE(buffer->head);
unsigned long tail = buffer->tail;
if (CIRC_CNT(head, tail, buffer->size) >= 1) {
/* read index before reading contents at that index */
smp_read_barrier_depends();
/* extract one item from the buffer */
struct item *item = buffer[tail];
consume_item(item);
smp_mb(); /* finish reading descriptor before incrementing tail */
buffer->tail = (tail + 1) & (buffer->size - 1);
}
spin_unlock(&consumer_lock);
This will instruct the CPU to make sure the index is up to date before reading
the new item, and then it shall make sure the CPU has finished reading the item
before it writes the new tail pointer, which will erase the item.
Note the use of ACCESS_ONCE() in both algorithms to read the opposition index.
This prevents the compiler from discarding and reloading its cached value -
which some compilers will do across smp_read_barrier_depends(). This isn't
strictly needed if you can be sure that the opposition index will _only_ be
used the once.
===============
FURTHER READING
===============
See also Documentation/memory-barriers.txt for a description of Linux's memory
barrier facilities.

1
Documentation/connector/cn_test.c
View File

@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/connector.h>

14
Documentation/fb/imacfb.txt → Documentation/fb/efifb.txt
View File

@ -1,9 +1,9 @@
What is imacfb?
What is efifb?
===============
This is a generic EFI platform driver for Intel based Apple computers.
Imacfb is only for EFI booted Intel Macs.
efifb is only for EFI booted Intel Macs.
Supported Hardware
==================
@ -16,16 +16,16 @@ MacMini
How to use it?
==============
Imacfb does not have any kind of autodetection of your machine.
efifb does not have any kind of autodetection of your machine.
You have to add the following kernel parameters in your elilo.conf:
Macbook :
video=imacfb:macbook
video=efifb:macbook
MacMini :
video=imacfb:mini
video=efifb:mini
Macbook Pro 15", iMac 17" :
video=imacfb:i17
video=efifb:i17
Macbook Pro 17", iMac 20" :
video=imacfb:i20
video=efifb:i20
--
Edgar Hucek <gimli@dark-green.com>

2
Documentation/filesystems/00-INDEX
View File

@ -16,6 +16,8 @@ befs.txt
- information about the BeOS filesystem for Linux.
bfs.txt
- info for the SCO UnixWare Boot Filesystem (BFS).
ceph.txt
- info for the Ceph Distributed File System
cifs.txt
- description of the CIFS filesystem.
coda.txt

18
Documentation/filesystems/9p.txt
View File

@ -37,6 +37,15 @@ For Plan 9 From User Space applications (http://swtch.com/plan9)
mount -t 9p `namespace`/acme /mnt/9 -o trans=unix,uname=$USER
For server running on QEMU host with virtio transport:
mount -t 9p -o trans=virtio <mount_tag> /mnt/9
where mount_tag is the tag associated by the server to each of the exported
mount points. Each 9P export is seen by the client as a virtio device with an
associated "mount_tag" property. Available mount tags can be
seen by reading /sys/bus/virtio/drivers/9pnet_virtio/virtio<n>/mount_tag files.
OPTIONS
=======
@ -47,7 +56,7 @@ OPTIONS
fd - used passed file descriptors for connection
(see rfdno and wfdno)
virtio - connect to the next virtio channel available
(from lguest or KVM with trans_virtio module)
(from QEMU with trans_virtio module)
rdma - connect to a specified RDMA channel
uname=name user name to attempt mount as on the remote server. The
@ -85,7 +94,12 @@ OPTIONS
port=n port to connect to on the remote server
noextend force legacy mode (no 9p2000.u semantics)
noextend force legacy mode (no 9p2000.u or 9p2000.L semantics)
version=name Select 9P protocol version. Valid options are:
9p2000 - Legacy mode (same as noextend)
9p2000.u - Use 9P2000.u protocol
9p2000.L - Use 9P2000.L protocol
dfltuid attempt to mount as a particular uid

11
Documentation/filesystems/ceph.txt
View File

@ -8,7 +8,7 @@ Basic features include:
* POSIX semantics
* Seamless scaling from 1 to many thousands of nodes
* High availability and reliability. No single points of failure.
* High availability and reliability. No single point of failure.
* N-way replication of data across storage nodes
* Fast recovery from node failures
* Automatic rebalancing of data on node addition/removal
@ -94,7 +94,7 @@ Mount Options
wsize=X
Specify the maximum write size in bytes. By default there is no
maximu. Ceph will normally size writes based on the file stripe
maximum. Ceph will normally size writes based on the file stripe
size.
rsize=X
@ -115,7 +115,7 @@ Mount Options
number of entries in that directory.
nocrc
Disable CRC32C calculation for data writes. If set, the OSD
Disable CRC32C calculation for data writes. If set, the storage node
must rely on TCP's error correction to detect data corruption
in the data payload.
@ -133,7 +133,8 @@ For more information on Ceph, see the home page at
http://ceph.newdream.net/
The Linux kernel client source tree is available at
git://ceph.newdream.net/linux-ceph-client.git
git://ceph.newdream.net/git/ceph-client.git
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
and the source for the full system is at
git://ceph.newdream.net/ceph.git
git://ceph.newdream.net/git/ceph.git

6
Documentation/filesystems/tmpfs.txt
View File

@ -82,11 +82,13 @@ tmpfs has a mount option to set the NUMA memory allocation policy for
all files in that instance (if CONFIG_NUMA is enabled) - which can be
adjusted on the fly via 'mount -o remount ...'
mpol=default prefers to allocate memory from the local node
mpol=default use the process allocation policy
(see set_mempolicy(2))
mpol=prefer:Node prefers to allocate memory from the given Node
mpol=bind:NodeList allocates memory only from nodes in NodeList
mpol=interleave prefers to allocate from each node in turn
mpol=interleave:NodeList allocates from each node of NodeList in turn
mpol=local prefers to allocate memory from the local node
NodeList format is a comma-separated list of decimal numbers and ranges,
a range being two hyphen-separated decimal numbers, the smallest and
@ -134,3 +136,5 @@ Author:
Christoph Rohland <cr@sap.com>, 1.12.01
Updated:
Hugh Dickins, 4 June 2007
Updated:
KOSAKI Motohiro, 16 Mar 2010

20
Documentation/memory-barriers.txt
View File

@ -3,6 +3,7 @@
============================
By: David Howells <dhowells@redhat.com>
Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Contents:
@ -60,6 +61,10 @@ Contents:
- And then there's the Alpha.
(*) Example uses.
- Circular buffers.
(*) References.
@ -2226,6 +2231,21 @@ The Alpha defines the Linux kernel's memory barrier model.
See the subsection on "Cache Coherency" above.
============
EXAMPLE USES
============
CIRCULAR BUFFERS
----------------
Memory barriers can be used to implement circular buffering without the need
of a lock to serialise the producer with the consumer. See:
Documentation/circular-buffers.txt
for details.
==========
REFERENCES
==========

143
Documentation/networking/stmmac.txt Normal file
View File

@ -0,0 +1,143 @@
STMicroelectronics 10/100/1000 Synopsys Ethernet driver
Copyright (C) 2007-2010 STMicroelectronics Ltd
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
(Synopsys IP blocks); it has been fully tested on STLinux platforms.
Currently this network device driver is for all STM embedded MAC/GMAC
(7xxx SoCs).
DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
Universal version 4.0 have been used for developing the first code
implementation.
Please, for more information also visit: www.stlinux.com
1) Kernel Configuration
The kernel configuration option is STMMAC_ETH:
Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) --->
STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH)
2) Driver parameters list:
debug: message level (0: no output, 16: all);
phyaddr: to manually provide the physical address to the PHY device;
dma_rxsize: DMA rx ring size;
dma_txsize: DMA tx ring size;
buf_sz: DMA buffer size;
tc: control the HW FIFO threshold;
tx_coe: Enable/Disable Tx Checksum Offload engine;
watchdog: transmit timeout (in milliseconds);
flow_ctrl: Flow control ability [on/off];
pause: Flow Control Pause Time;
tmrate: timer period (only if timer optimisation is configured).
3) Command line options
Driver parameters can be also passed in command line by using:
stmmaceth=dma_rxsize:128,dma_txsize:512
4) Driver information and notes
4.1) Transmit process
The xmit method is invoked when the kernel needs to transmit a packet; it sets
the descriptors in the ring and informs the DMA engine that there is a packet
ready to be transmitted.
Once the controller has finished transmitting the packet, an interrupt is
triggered; So the driver will be able to release the socket buffers.
By default, the driver sets the NETIF_F_SG bit in the features field of the
net_device structure enabling the scatter/gather feature.
4.2) Receive process
When one or more packets are received, an interrupt happens. The interrupts
are not queued so the driver has to scan all the descriptors in the ring during
the receive process.
This is based on NAPI so the interrupt handler signals only if there is work to be
done, and it exits.
Then the poll method will be scheduled at some future point.
The incoming packets are stored, by the DMA, in a list of pre-allocated socket
buffers in order to avoid the memcpy (Zero-copy).
4.3) Timer-Driver Interrupt
Instead of having the device that asynchronously notifies the frame receptions, the
driver configures a timer to generate an interrupt at regular intervals.
Based on the granularity of the timer, the frames that are received by the device
will experience different levels of latency. Some NICs have dedicated timer
device to perform this task. STMMAC can use either the RTC device or the TMU
channel 2 on STLinux platforms.
The timers frequency can be passed to the driver as parameter; when change it,
take care of both hardware capability and network stability/performance impact.
Several performance tests on STM platforms showed this optimisation allows to spare
the CPU while having the maximum throughput.
4.4) WOL
Wake up on Lan feature through Magic Frame is only supported for the GMAC
core.
4.5) DMA descriptors
Driver handles both normal and enhanced descriptors. The latter has been only
tested on DWC Ether MAC 10/100/1000 Universal version 3.41a.
4.6) Ethtool support
Ethtool is supported. Driver statistics and internal errors can be taken using:
ethtool -S ethX command. It is possible to dump registers etc.
4.7) Jumbo and Segmentation Offloading
Jumbo frames are supported and tested for the GMAC.
The GSO has been also added but it's performed in software.
LRO is not supported.
4.8) Physical
The driver is compatible with PAL to work with PHY and GPHY devices.
4.9) Platform information
Several information came from the platform; please refer to the
driver's Header file in include/linux directory.
struct plat_stmmacenet_data {
int bus_id;
int pbl;
int has_gmac;
void (*fix_mac_speed)(void *priv, unsigned int speed);
void (*bus_setup)(unsigned long ioaddr);
#ifdef CONFIG_STM_DRIVERS
struct stm_pad_config *pad_config;
#endif
void *bsp_priv;
};
Where:
- pbl (Programmable Burst Length) is maximum number of
beats to be transferred in one DMA transaction.
GMAC also enables the 4xPBL by default.
- fix_mac_speed and bus_setup are used to configure internal target
registers (on STM platforms);
- has_gmac: GMAC core is on board (get it at run-time in the next step);
- bus_id: bus identifier.
struct plat_stmmacphy_data {
int bus_id;
int phy_addr;
unsigned int phy_mask;
int interface;
int (*phy_reset)(void *priv);
void *priv;
};
Where:
- bus_id: bus identifier;
- phy_addr: physical address used for the attached phy device;
set it to -1 to get it at run-time;
- interface: physical MII interface mode;
- phy_reset: hook to reset HW function.
TODO:
- Continue to make the driver more generic and suitable for other Synopsys
Ethernet controllers used on other architectures (i.e. ARM).
- 10G controllers are not supported.
- MAC uses Normal descriptors and GMAC uses enhanced ones.
This is a limit that should be reviewed. MAC could want to
use the enhanced structure.
- Checksumming: Rx/Tx csum is done in HW in case of GMAC only.
- Review the timer optimisation code to use an embedded device that seems to be
available in new chip generations.

54
Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
View File

@ -21,6 +21,15 @@ Required properties:
- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
threads.
Optional properties:
- fsl,firmware-phandle:
Usage: required only if there is no fsl,qe-firmware child node
Value type: <phandle>
Definition: Points to a firmware node (see "QE Firmware Node" below)
that contains the firmware that should be uploaded for this QE.
The compatible property for the firmware node should say,
"fsl,qe-firmware".
Recommended properties
- brg-frequency : the internal clock source frequency for baud-rate
generators in Hz.
@ -59,3 +68,48 @@ Example:
reg = <0 c000>;
};
};
* QE Firmware Node
This node defines a firmware binary that is embedded in the device tree, for
the purpose of passing the firmware from bootloader to the kernel, or from
the hypervisor to the guest.
The firmware node itself contains the firmware binary contents, a compatible
property, and any firmware-specific properties. The node should be placed
inside a QE node that needs it. Doing so eliminates the need for a
fsl,firmware-phandle property. Other QE nodes that need the same firmware
should define an fsl,firmware-phandle property that points to the firmware node
in the first QE node.
The fsl,firmware property can be specified in the DTS (possibly using incbin)
or can be inserted by the boot loader at boot time.
Required properties:
- compatible
Usage: required
Value type: <string>
Definition: A standard property. Specify a string that indicates what
kind of firmware it is. For QE, this should be "fsl,qe-firmware".
- fsl,firmware
Usage: required
Value type: <prop-encoded-array>, encoded as an array of bytes
Definition: A standard property. This property contains the firmware
binary "blob".
Example:
qe1@e0080000 {
compatible = "fsl,qe";
qe_firmware:qe-firmware {
compatible = "fsl,qe-firmware";
fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
};
...
};
qe2@e0090000 {
compatible = "fsl,qe";
fsl,firmware-phandle = <&qe_firmware>;
...
};

16
Documentation/sound/alsa/HD-Audio.txt
View File

@ -119,10 +119,18 @@ the codec slots 0 and 1 no matter what the hardware reports.
Interrupt Handling
~~~~~~~~~~~~~~~~~~
In rare but some cases, the interrupt isn't properly handled as
default. You would notice this by the DMA transfer error reported by
ALSA PCM core, for example. Using MSI might help in such a case.
Pass `enable_msi=1` option for enabling MSI.
HD-audio driver uses MSI as default (if available) since 2.6.33
kernel as MSI works better on some machines, and in general, it's
better for performance. However, Nvidia controllers showed bad
regressions with MSI (especially in a combination with AMD chipset),
thus we disabled MSI for them.
There seem also still other devices that don't work with MSI. If you
see a regression wrt the sound quality (stuttering, etc) or a lock-up
in the recent kernel, try to pass `enable_msi=0` option to disable
MSI. If it works, you can add the known bad device to the blacklist
defined in hda_intel.c. In such a case, please report and give the
patch back to the upstream developer.
HD-AUDIO CODEC

6
Documentation/volatile-considered-harmful.txt
View File

@ -63,9 +63,9 @@ way to perform a busy wait is:
cpu_relax();
The cpu_relax() call can lower CPU power consumption or yield to a
hyperthreaded twin processor; it also happens to serve as a memory barrier,
so, once again, volatile is unnecessary. Of course, busy-waiting is
generally an anti-social act to begin with.
hyperthreaded twin processor; it also happens to serve as a compiler
barrier, so, once again, volatile is unnecessary. Of course, busy-
waiting is generally an anti-social act to begin with.
There are still a few rare situations where volatile makes sense in the
kernel:

3
Documentation/watchdog/src/watchdog-simple.c
View File

@ -17,9 +17,6 @@ int main(void)
ret = -1;
break;
}
ret = fsync(fd);
if (ret)
break;
sleep(10);
}
close(fd);

8
Documentation/watchdog/src/watchdog-test.c
View File

@ -31,6 +31,8 @@ static void keep_alive(void)
*/
int main(int argc, char *argv[])
{
int flags;
fd = open("/dev/watchdog", O_WRONLY);
if (fd == -1) {
@ -41,12 +43,14 @@ int main(int argc, char *argv[])
if (argc > 1) {
if (!strncasecmp(argv[1], "-d", 2)) {
ioctl(fd, WDIOC_SETOPTIONS, WDIOS_DISABLECARD);
flags = WDIOS_DISABLECARD;
ioctl(fd, WDIOC_SETOPTIONS, &flags);
fprintf(stderr, "Watchdog card disabled.\n");
fflush(stderr);
exit(0);
} else if (!strncasecmp(argv[1], "-e", 2)) {
ioctl(fd, WDIOC_SETOPTIONS, WDIOS_ENABLECARD);
flags = WDIOS_ENABLECARD;
ioctl(fd, WDIOC_SETOPTIONS, &flags);
fprintf(stderr, "Watchdog card enabled.\n");
fflush(stderr);
exit(0);

5
Documentation/watchdog/watchdog-api.txt
View File

@ -222,11 +222,10 @@ returned value is the temperature in degrees fahrenheit.
ioctl(fd, WDIOC_GETTEMP, &temperature);
Finally the SETOPTIONS ioctl can be used to control some aspects of
the cards operation; right now the pcwd driver is the only one
supporting this ioctl.
the cards operation.
int options = 0;
ioctl(fd, WDIOC_SETOPTIONS, options);
ioctl(fd, WDIOC_SETOPTIONS, &options);
The following options are available:

77
MAINTAINERS
View File

@ -797,12 +797,12 @@ M: Michael Petchkovsky <mkpetch@internode.on.net>
S: Maintained
ARM/NOMADIK ARCHITECTURE
M: Alessandro Rubini <rubini@unipv.it>
M: STEricsson <STEricsson_nomadik_linux@list.st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-nomadik/
F: arch/arm/plat-nomadik/
M: Alessandro Rubini <rubini@unipv.it>
M: STEricsson <STEricsson_nomadik_linux@list.st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-nomadik/
F: arch/arm/plat-nomadik/
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
M: Nelson Castillo <arhuaco@freaks-unidos.net>
@ -971,6 +971,16 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.mcuos.com
S: Maintained
ARM/U300 MACHINE SUPPORT
M: Linus Walleij <linus.walleij@stericsson.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: arch/arm/mach-u300/
F: drivers/i2c/busses/i2c-stu300.c
F: drivers/rtc/rtc-coh901331.c
F: drivers/watchdog/coh901327_wdt.c
F: drivers/dma/coh901318*
ARM/U8500 ARM ARCHITECTURE
M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1443,7 +1453,7 @@ F: arch/powerpc/platforms/cell/
CEPH DISTRIBUTED FILE SYSTEM CLIENT
M: Sage Weil <sage@newdream.net>
L: ceph-devel@lists.sourceforge.net
L: ceph-devel@vger.kernel.org
W: http://ceph.newdream.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
S: Supported
@ -1926,17 +1936,17 @@ F: drivers/scsi/dpt*
F: drivers/scsi/dpt/
DRBD DRIVER
P: Philipp Reisner
P: Lars Ellenberg
M: drbd-dev@lists.linbit.com
L: drbd-user@lists.linbit.com
W: http://www.drbd.org
T: git git://git.drbd.org/linux-2.6-drbd.git drbd
T: git git://git.drbd.org/drbd-8.3.git
S: Supported
F: drivers/block/drbd/
F: lib/lru_cache.c
F: Documentation/blockdev/drbd/
P: Philipp Reisner
P: Lars Ellenberg
M: drbd-dev@lists.linbit.com
L: drbd-user@lists.linbit.com
W: http://www.drbd.org
T: git git://git.drbd.org/linux-2.6-drbd.git drbd
T: git git://git.drbd.org/drbd-8.3.git
S: Supported
F: drivers/block/drbd/
F: lib/lru_cache.c
F: Documentation/blockdev/drbd/
DRIVER CORE, KOBJECTS, AND SYSFS
M: Greg Kroah-Hartman <gregkh@suse.de>
@ -2474,12 +2484,6 @@ L: linuxppc-dev@ozlabs.org
S: Odd Fixes
F: drivers/char/hvc_*
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/char/virtio_console.c
iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
M: Peter Jones <pjones@redhat.com>
M: Konrad Rzeszutek Wilk <konrad@kernel.org>
@ -3083,6 +3087,7 @@ F: include/scsi/*iscsi*
ISDN SUBSYSTEM
M: Karsten Keil <isdn@linux-pingi.de>
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
L: netdev@vger.kernel.org
W: http://www.isdn4linux.de
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
S: Maintained
@ -3269,6 +3274,16 @@ S: Maintained
F: include/linux/kexec.h
F: kernel/kexec.c
KEYS/KEYRINGS:
M: David Howells <dhowells@redhat.com>
L: keyrings@linux-nfs.org
S: Maintained
F: Documentation/keys.txt
F: include/linux/key.h
F: include/linux/key-type.h
F: include/keys/
F: security/keys/
KGDB
M: Jason Wessel <jason.wessel@windriver.com>
L: kgdb-bugreport@lists.sourceforge.net
@ -3518,8 +3533,8 @@ F: drivers/scsi/sym53c8xx_2/
LTP (Linux Test Project)
M: Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
M: Garrett Cooper <yanegomi@gmail.com>
M: Mike Frysinger <vapier@gentoo.org>
M: Subrata Modak <subrata@linux.vnet.ibm.com>
M: Mike Frysinger <vapier@gentoo.org>
M: Subrata Modak <subrata@linux.vnet.ibm.com>
L: ltp-list@lists.sourceforge.net (subscribers-only)
W: http://ltp.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
@ -5423,7 +5438,6 @@ S: Maintained
F: sound/soc/codecs/twl4030*
TIPC NETWORK LAYER
M: Per Liden <per.liden@ericsson.com>
M: Jon Maloy <jon.maloy@ericsson.com>
M: Allan Stephens <allan.stephens@windriver.com>
L: tipc-discussion@lists.sourceforge.net
@ -5961,6 +5975,13 @@ S: Maintained
F: Documentation/filesystems/vfat.txt
F: fs/fat/
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/char/virtio_console.c
F: include/linux/virtio_console.h
VIRTIO HOST (VHOST)
M: "Michael S. Tsirkin" <mst@redhat.com>
L: kvm@vger.kernel.org
@ -6201,7 +6222,7 @@ F: arch/x86/
X86 PLATFORM DRIVERS
M: Matthew Garrett <mjg@redhat.com>
L: platform-driver-x86@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
S: Maintained
F: drivers/platform/x86

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 34
EXTRAVERSION = -rc2
EXTRAVERSION = -rc4
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*

1
arch/alpha/boot/bootp.c
View File

@ -8,6 +8,7 @@
* based significantly on the arch/alpha/boot/main.c of Linus Torvalds
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>

1
arch/alpha/boot/bootpz.c
View File

@ -10,6 +10,7 @@
* and the decompression code from MILO.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>

1
arch/alpha/boot/main.c
View File

@ -6,6 +6,7 @@
* This file is the bootloader for the Linux/AXP kernel
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>

1
arch/alpha/boot/misc.c
View File

@ -19,6 +19,7 @@
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <asm/uaccess.h>

1
arch/alpha/kernel/irq.c
View File

@ -18,7 +18,6 @@
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/irq.h>

2
arch/alpha/kernel/osf_sys.c
View File

@ -20,7 +20,6 @@
#include <linux/syscalls.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/utsname.h>
#include <linux/time.h>
@ -37,6 +36,7 @@
#include <linux/uio.h>
#include <linux/vfs.h>
#include <linux/rcupdate.h>
#include <linux/slab.h>
#include <asm/fpu.h>
#include <asm/io.h>

1
arch/alpha/kernel/pci-noop.c
View File

@ -7,6 +7,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/gfp.h>
#include <linux/capability.h>
#include <linux/mm.h>
#include <linux/errno.h>

1
arch/alpha/kernel/pci-sysfs.c
View File

@ -10,6 +10,7 @@
*/
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/pci.h>
static int hose_mmap_page_range(struct pci_controller *hose,

2
arch/alpha/kernel/pci_iommu.c
View File

@ -5,7 +5,7 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/gfp.h>
#include <linux/bootmem.h>
#include <linux/scatterlist.h>
#include <linux/log2.h>

2
arch/alpha/kernel/process.c
View File

@ -17,7 +17,6 @@
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/time.h>
#include <linux/major.h>
@ -28,6 +27,7 @@
#include <linux/reboot.h>
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/slab.h>
#include <asm/reg.h>
#include <asm/uaccess.h>

1
arch/alpha/kernel/ptrace.c
View File

@ -11,7 +11,6 @@
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/slab.h>
#include <linux/security.h>
#include <linux/signal.h>

1
arch/alpha/kernel/smc37c669.c
View File

@ -3,7 +3,6 @@
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>

1
arch/alpha/kernel/smc37c93x.c
View File

@ -4,7 +4,6 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>

1
arch/alpha/kernel/srm_env.c
View File

@ -30,6 +30,7 @@
*/
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/proc_fs.h>

1
arch/alpha/mm/init.c
View File

@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/bootmem.h> /* max_low_pfn */
#include <linux/vmalloc.h>
#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/uaccess.h>

2
arch/arm/boot/compressed/head.S
View File

@ -172,7 +172,7 @@ not_angel:
adr r0, LC0
ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} )
THUMB( ldr sp, [r0, #28] )
THUMB( ldr sp, [r0, #32] )
subs r0, r0, r1 @ calculate the delta offset
@ if delta is zero, we are

1
arch/arm/common/clkdev.c
View File

@ -18,6 +18,7 @@
#include <linux/string.h>
#include <linux/mutex.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>

1
arch/arm/common/it8152.c
View File

@ -21,7 +21,6 @@
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/irq.h>

10
arch/arm/common/locomo.c
View File

@ -290,7 +290,7 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state)
save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPO);
save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPE);
save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */
@ -418,7 +418,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
/* Longtime timer */
locomo_writel(0, lchip->base + LOCOMO_LTINT);
/* SPI */
locomo_writel(0, lchip->base + LOCOMO_SPIIE);
locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
r = locomo_readl(lchip->base + LOCOMO_ASD);
@ -707,7 +707,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
return;
goto out;
}
/* Send Sub address (LSB is channel select) */
@ -735,7 +735,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
return;
goto out;
}
/* Send DAC data */
@ -760,9 +760,9 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
return;
}
out:
/* stop */
r = locomo_readl(mapbase + LOCOMO_DAC);
r &= ~(LOCOMO_DAC_SCLOEB);

38
arch/arm/include/asm/cacheflush.h
View File

@ -15,6 +15,7 @@
#include <asm/glue.h>
#include <asm/shmparam.h>
#include <asm/cachetype.h>
#include <asm/outercache.h>
#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
@ -219,12 +220,6 @@ struct cpu_cache_fns {
void (*dma_flush_range)(const void *, const void *);
};
struct outer_cache_fns {
void (*inv_range)(unsigned long, unsigned long);
void (*clean_range)(unsigned long, unsigned long);
void (*flush_range)(unsigned long, unsigned long);
};
/*
* Select the calling method
*/
@ -281,37 +276,6 @@ extern void dmac_flush_range(const void *, const void *);
#endif
#ifdef CONFIG_OUTER_CACHE
extern struct outer_cache_fns outer_cache;
static inline void outer_inv_range(unsigned long start, unsigned long end)
{
if (outer_cache.inv_range)
outer_cache.inv_range(start, end);
}
static inline void outer_clean_range(unsigned long start, unsigned long end)
{
if (outer_cache.clean_range)
outer_cache.clean_range(start, end);
}
static inline void outer_flush_range(unsigned long start, unsigned long end)
{
if (outer_cache.flush_range)
outer_cache.flush_range(start, end);
}
#else
static inline void outer_inv_range(unsigned long start, unsigned long end)
{ }
static inline void outer_clean_range(unsigned long start, unsigned long end)
{ }
static inline void outer_flush_range(unsigned long start, unsigned long end)
{ }
#endif
/*
* Copy user data from/to a page which is mapped into a different
* processes address space. Really, we want to allow our "user

1
arch/arm/include/asm/clkdev.h
View File

@ -13,6 +13,7 @@
#define __ASM_CLKDEV_H
struct clk;
struct device;
struct clk_lookup {
struct list_head node;

1
arch/arm/include/asm/irq.h
View File

@ -17,6 +17,7 @@
#ifndef __ASSEMBLY__
struct irqaction;
struct pt_regs;
extern void migrate_irqs(void);
extern void asm_do_IRQ(unsigned int, struct pt_regs *);

75
arch/arm/include/asm/outercache.h Normal file
View File

@ -0,0 +1,75 @@
/*
* arch/arm/include/asm/outercache.h
*
* Copyright (C) 2010 ARM Ltd.
* Written by Catalin Marinas <catalin.marinas@arm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_OUTERCACHE_H
#define __ASM_OUTERCACHE_H
struct outer_cache_fns {
void (*inv_range)(unsigned long, unsigned long);
void (*clean_range)(unsigned long, unsigned long);
void (*flush_range)(unsigned long, unsigned long);
#ifdef CONFIG_OUTER_CACHE_SYNC
void (*sync)(void);
#endif
};
#ifdef CONFIG_OUTER_CACHE
extern struct outer_cache_fns outer_cache;
static inline void outer_inv_range(unsigned long start, unsigned long end)
{
if (outer_cache.inv_range)
outer_cache.inv_range(start, end);
}
static inline void outer_clean_range(unsigned long start, unsigned long end)
{
if (outer_cache.clean_range)
outer_cache.clean_range(start, end);
}
static inline void outer_flush_range(unsigned long start, unsigned long end)
{
if (outer_cache.flush_range)
outer_cache.flush_range(start, end);
}
#else
static inline void outer_inv_range(unsigned long start, unsigned long end)
{ }
static inline void outer_clean_range(unsigned long start, unsigned long end)
{ }
static inline void outer_flush_range(unsigned long start, unsigned long end)
{ }
#endif
#ifdef CONFIG_OUTER_CACHE_SYNC
static inline void outer_sync(void)
{
if (outer_cache.sync)
outer_cache.sync();
}
#else
static inline void outer_sync(void)
{ }
#endif
#endif /* __ASM_OUTERCACHE_H */

16
arch/arm/include/asm/system.h
View File

@ -60,6 +60,8 @@
#include <linux/linkage.h>
#include <linux/irqflags.h>
#include <asm/outercache.h>
#define __exception __attribute__((section(".exception.text")))
struct thread_info;
@ -137,10 +139,12 @@ extern unsigned int user_debug;
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#endif
#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
#define mb() dmb()
#ifdef CONFIG_ARCH_HAS_BARRIERS
#include <mach/barriers.h>
#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
#define mb() do { dsb(); outer_sync(); } while (0)
#define rmb() dmb()
#define wmb() dmb()
#define wmb() mb()
#else
#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
@ -152,9 +156,9 @@ extern unsigned int user_debug;
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#else
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_mb() dmb()
#define smp_rmb() dmb()
#define smp_wmb() dmb()
#endif
#define read_barrier_depends() do { } while(0)

1
arch/arm/kernel/irq.c
View File

@ -27,7 +27,6 @@
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/smp.h>
#include <linux/init.h>

11
arch/arm/kernel/kprobes.c
View File

@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/stop_machine.h>
#include <linux/stringify.h>
#include <asm/traps.h>
@ -393,6 +394,14 @@ void __kprobes jprobe_return(void)
/*
* Setup an empty pt_regs. Fill SP and PC fields as
* they're needed by longjmp_break_handler.
*
* We allocate some slack between the original SP and start of
* our fabricated regs. To be precise we want to have worst case
* covered which is STMFD with all 16 regs so we allocate 2 *
* sizeof(struct_pt_regs)).
*
* This is to prevent any simulated instruction from writing
* over the regs when they are accessing the stack.
*/
"sub sp, %0, %1 \n\t"
"ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
@ -410,7 +419,7 @@ void __kprobes jprobe_return(void)
"ldmia sp, {r0 - pc} \n\t"
:
: "r" (kcb->jprobe_saved_regs.ARM_sp),
"I" (sizeof(struct pt_regs)),
"I" (sizeof(struct pt_regs) * 2),
"J" (offsetof(struct pt_regs, ARM_sp)),
"J" (offsetof(struct pt_regs, ARM_pc)),
"J" (offsetof(struct pt_regs, ARM_cpsr))

2
arch/arm/kernel/module.c
View File

@ -16,9 +16,9 @@
#include <linux/mm.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/gfp.h>
#include <asm/pgtable.h>
#include <asm/sections.h>

1
arch/arm/kernel/process.c
View File

@ -16,7 +16,6 @@
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/delay.h>
#include <linux/reboot.h>

2
arch/arm/kernel/sys_arm.c
View File

@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/sem.h>
#include <linux/msg.h>
@ -27,6 +26,7 @@
#include <linux/file.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
/* Fork a new task - this creates a new program thread.
* This is called indirectly via a small wrapper

4
arch/arm/lib/memmove.S
View File

@ -74,7 +74,7 @@ ENTRY(memmove)
rsb ip, ip, #32
addne pc, pc, ip @ C is always clear here
b 7f
6: nop
6: W(nop)
W(ldr) r3, [r1, #-4]!
W(ldr) r4, [r1, #-4]!
W(ldr) r5, [r1, #-4]!
@ -85,7 +85,7 @@ ENTRY(memmove)
add pc, pc, ip
nop
nop
W(nop)
W(str) r3, [r0, #-4]!
W(str) r4, [r0, #-4]!
W(str) r5, [r0, #-4]!

1
arch/arm/lib/uaccess_with_memcpy.c
View File

@ -16,6 +16,7 @@
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/hardirq.h> /* for in_atomic() */
#include <linux/gfp.h>
#include <asm/current.h>
#include <asm/page.h>

1
arch/arm/mach-aaec2000/core.c
View File

@ -20,6 +20,7 @@
#include <linux/timex.h>
#include <linux/signal.h>
#include <linux/clk.h>
#include <linux/gfp.h>
#include <mach/hardware.h>
#include <asm/irq.h>

12
arch/arm/mach-at91/pm_slowclock.S
View File

@ -205,13 +205,25 @@ ENTRY(at91_slow_clock)
ldr r3, .saved_pllbr
str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
tst r3, #(AT91_PMC_MUL & 0xff0000)
bne 1f
tst r3, #(AT91_PMC_MUL & ~0xff0000)
beq 2f
1:
wait_pllblock
2:
/* Restore PLLA setting */
ldr r3, .saved_pllar
str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
tst r3, #(AT91_PMC_MUL & 0xff0000)
bne 3f
tst r3, #(AT91_PMC_MUL & ~0xff0000)
beq 4f
3:
wait_pllalock
4:
#ifdef SLOWDOWN_MASTER_CLOCK
/*

14
arch/arm/mach-bcmring/dma.c
View File

@ -28,6 +28,7 @@
#include <linux/interrupt.h>
#include <linux/irqreturn.h>
#include <linux/proc_fs.h>
#include <linux/slab.h>
#include <mach/timer.h>
@ -2220,11 +2221,15 @@ EXPORT_SYMBOL(dma_map_create_descriptor_ring);
int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
int dirtied /* non-zero if any of the pages were modified */
) {
int rc = 0;
int regionIdx;
int segmentIdx;
DMA_Region_t *region;
DMA_Segment_t *segment;
down(&memMap->lock);
for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
region = &memMap->region[regionIdx];
@ -2238,7 +2243,8 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
printk(KERN_ERR
"%s: vmalloc'd pages are not yet supported\n",
__func__);
return -EINVAL;
rc = -EINVAL;
goto out;
}
case DMA_MEM_TYPE_KMALLOC:
@ -2275,7 +2281,8 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
printk(KERN_ERR
"%s: Unsupported memory type: %d\n",
__func__, region->memType);
return -EINVAL;
rc = -EINVAL;
goto out;
}
}
@ -2313,9 +2320,10 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
memMap->numRegionsUsed = 0;
memMap->inUse = 0;
out:
up(&memMap->lock);
return 0;
return rc;
}
EXPORT_SYMBOL(dma_unmap);

1
arch/arm/mach-davinci/board-dm365-evm.c
View File

@ -22,6 +22,7 @@
#include <linux/leds.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
#include <linux/mtd/nand.h>
#include <linux/input.h>
#include <linux/spi/spi.h>

1
arch/arm/mach-davinci/dm365.c
View File

@ -758,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_MMCINT] = 7,
[IRQ_DM365_MMCINT1] = 7,
[IRQ_DM365_PWMINT3] = 7,
[IRQ_DDRINT] = 4,
[IRQ_AEMIFINT] = 2,
[IRQ_DM365_SDIOINT1] = 2,
[IRQ_TINT0_TINT12] = 7,

4
arch/arm/mach-davinci/dma.c
View File

@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <mach/edma.h>
@ -1266,7 +1267,8 @@ int edma_start(unsigned channel)
/* EDMA channel with event association */
pr_debug("EDMA: ER%d %08x\n", j,
edma_shadow0_read_array(ctlr, SH_ER, j));
/* Clear any pending error */
/* Clear any pending event or error */
edma_write_array(ctlr, EDMA_ECR, j, mask);
edma_write_array(ctlr, EDMA_EMCR, j, mask);
/* Clear any SER */
edma_shadow0_write_array(ctlr, SH_SECR, j, mask);

8
arch/arm/mach-davinci/include/mach/da8xx.h
View File

@ -3,7 +3,7 @@
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
* 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
* 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
@ -13,7 +13,9 @@
#include <video/da8xx-fb.h>
#include <linux/platform_device.h>
#include <linux/davinci_emac.h>
#include <mach/serial.h>
#include <mach/edma.h>
#include <mach/i2c.h>
@ -144,6 +146,10 @@ extern const short da850_mmcsd0_pins[];
extern const short da850_nand_pins[];
extern const short da850_nor_pins[];
#ifdef CONFIG_DAVINCI_MUX
int da8xx_pinmux_setup(const short pins[]);
#else
static inline int da8xx_pinmux_setup(const short pins[]) { return 0; }
#endif
#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */

6
arch/arm/mach-davinci/time.c
View File

@ -253,8 +253,6 @@ static void __init timer_init(void)
irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
setup_irq(irq, &t->irqaction);
}
timer32_config(&timers[i]);
}
}
@ -331,6 +329,7 @@ static void __init davinci_timer_init(void)
unsigned int clocksource_id;
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
int i;
clockevent_id = soc_info->timer_info->clockevent_id;
clocksource_id = soc_info->timer_info->clocksource_id;
@ -389,6 +388,9 @@ static void __init davinci_timer_init(void)
clockevent_davinci.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_davinci);
for (i=0; i< ARRAY_SIZE(timers); i++)
timer32_config(&timers[i]);
}
struct sys_timer davinci_timer = {

6
arch/arm/mach-ep93xx/gpio.c
View File

@ -25,7 +25,7 @@
#include <mach/hardware.h>
/*************************************************************************
* GPIO handling for EP93xx
* Interrupt handling for EP93xx on-chip GPIOs
*************************************************************************/
static unsigned char gpio_int_unmasked[3];
static unsigned char gpio_int_enabled[3];
@ -40,7 +40,7 @@ static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
void ep93xx_gpio_update_int_params(unsigned port)
static void ep93xx_gpio_update_int_params(unsigned port)
{
BUG_ON(port > 2);
@ -56,7 +56,7 @@ void ep93xx_gpio_update_int_params(unsigned port)
EP93XX_GPIO_REG(int_en_register_offset[port]));
}
void ep93xx_gpio_int_mask(unsigned line)
static inline void ep93xx_gpio_int_mask(unsigned line)
{
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
}

1
arch/arm/mach-h720x/common.c
View File

@ -14,7 +14,6 @@
*/
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/mman.h>
#include <linux/init.h>
#include <linux/interrupt.h>

1
arch/arm/mach-integrator/cpu.c
View File

@ -13,7 +13,6 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/init.h>

1
arch/arm/mach-integrator/impd1.c
View File

@ -21,6 +21,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>

2
arch/arm/mach-integrator/integrator_cp.c
View File

@ -13,7 +13,6 @@
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
@ -21,6 +20,7 @@
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/gfp.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>

1
arch/arm/mach-integrator/pci_v3.c
View File

@ -22,7 +22,6 @@
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>

1
arch/arm/mach-iop13xx/pci.c
View File

@ -18,6 +18,7 @@
*/
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <asm/irq.h>

1
arch/arm/mach-iop32x/glantank.c
View File

@ -19,7 +19,6 @@
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-iop32x/iq31244.c
View File

@ -21,7 +21,6 @@
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-iop32x/iq80321.c
View File

@ -18,7 +18,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-iop32x/n2100.c
View File

@ -23,7 +23,6 @@
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-iop33x/iq80331.c
View File

@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-iop33x/iq80332.c
View File

@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-ixp2000/enp2611.c
View File

@ -26,7 +26,6 @@
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/tty.h>

1
arch/arm/mach-ixp2000/ixdp2400.c
View File

@ -23,7 +23,6 @@
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>

1
arch/arm/mach-ixp2000/ixdp2800.c
View File

@ -23,7 +23,6 @@
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>

1
arch/arm/mach-ixp2000/ixdp2x00.c
View File

@ -23,7 +23,6 @@
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>

1
arch/arm/mach-ixp2000/ixdp2x01.c
View File

@ -23,7 +23,6 @@
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/tty.h>

1
arch/arm/mach-ixp2000/pci.c
View File

@ -22,7 +22,6 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>

2
arch/arm/mach-ixp23xx/include/mach/memory.h
View File

@ -19,7 +19,7 @@
*/
#define PHYS_OFFSET (0x00000000)
#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0))
#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
#define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
#define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))

1
arch/arm/mach-ixp23xx/pci.c
View File

@ -23,7 +23,6 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>

1
arch/arm/mach-ixp4xx/avila-setup.c
View File

@ -17,7 +17,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <linux/i2c-gpio.h>
#include <asm/types.h>
#include <asm/setup.h>

1
arch/arm/mach-ixp4xx/coyote-setup.c
View File

@ -14,7 +14,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>

1
arch/arm/mach-ixp4xx/gateway7001-setup.c
View File

@ -17,7 +17,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>

1
arch/arm/mach-ixp4xx/gtwx5715-setup.c
View File

@ -27,7 +27,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>

1
arch/arm/mach-ixp4xx/ixdp425-setup.c
View File

@ -14,7 +14,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <linux/i2c-gpio.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>

1
arch/arm/mach-ixp4xx/ixp4xx_npe.c
View File

@ -20,7 +20,6 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <mach/npe.h>
#define DEBUG_MSG 0

1
arch/arm/mach-ixp4xx/wg302v2-setup.c
View File

@ -18,7 +18,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>

4
arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
View File

@ -74,9 +74,9 @@ static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
.desc = "SWR Button",
.active_low = 1,
}, {
.code = KEY_F1,
.code = KEY_WPS_BUTTON,
.gpio = 46,
.desc = "WPS Button(F1)",
.desc = "WPS Button",
.active_low = 1,
},
};

1
arch/arm/mach-kirkwood/pcie.c
View File

@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/mbus.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>

1
arch/arm/mach-lh7a40x/clcd.c
View File

@ -10,6 +10,7 @@
*/
#include <linux/init.h>
#include <linux/gfp.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/sysdev.h>

5
arch/arm/mach-mmp/include/mach/uncompress.h
View File

@ -14,7 +14,7 @@
#define UART2_BASE (APB_PHYS_BASE + 0x17000)
#define UART3_BASE (APB_PHYS_BASE + 0x18000)
static volatile unsigned long *UART = (unsigned long *)UART2_BASE;
static volatile unsigned long *UART;
static inline void putc(char c)
{
@ -37,6 +37,9 @@ static inline void flush(void)
static inline void arch_decomp_setup(void)
{
/* default to UART2 */
UART = (unsigned long *)UART2_BASE;
if (machine_is_avengers_lite())
UART = (unsigned long *)UART3_BASE;
}

10
arch/arm/mach-mx3/Kconfig
View File

@ -62,6 +62,15 @@ config MACH_MX31_3DS
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31_3DS_MXC_NAND_USE_BBT
bool "Make the MXC NAND driver use the in flash Bad Block Table"
depends on MACH_MX31_3DS
depends on MTD_NAND_MXC
help
Enable this if you want that the MXC NAND driver uses the in flash
Bad Block Table to know what blocks are bad instead of scanning the
entire flash looking for bad block markers.
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
@ -95,6 +104,7 @@ config MACH_PCM043
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select ARCH_MX31
select MXC_ULPI if USB_ULPI
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.

5
arch/arm/mach-mx3/clock-imx31.c
View File

@ -468,6 +468,7 @@ static struct clk ahb_clk = {
}
DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
@ -490,7 +491,7 @@ DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk);
DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
@ -514,7 +515,6 @@ DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk)
DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@ -572,7 +572,6 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "iim", iim_clk)
_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
_REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
};
int __init mx31_clocks_init(unsigned long fref)

19
arch/arm/mach-mx3/devices.c
View File

@ -575,11 +575,26 @@ struct platform_device imx_ssi_device1 = {
.resource = imx_ssi_resources1,
};
static int mx3_devices_init(void)
static struct resource imx_wdt_resources[] = {
{
.flags = IORESOURCE_MEM,
},
};
struct platform_device imx_wdt_device0 = {
.name = "imx-wdt",
.id = 0,
.num_resources = ARRAY_SIZE(imx_wdt_resources),
.resource = imx_wdt_resources,
};
static int __init mx3_devices_init(void)
{
if (cpu_is_mx31()) {
mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
mxc_register_device(&mxc_rnga_device, NULL);
}
if (cpu_is_mx35()) {
@ -597,6 +612,8 @@ static int mx3_devices_init(void)
imx_ssi_resources0[1].end = MX35_INT_SSI1;
imx_ssi_resources1[1].start = MX35_INT_SSI2;
imx_ssi_resources1[1].end = MX35_INT_SSI2;
imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
}
return 0;

3
arch/arm/mach-mx3/devices.h
View File

@ -25,4 +25,5 @@ extern struct platform_device mxc_spi_device1;
extern struct platform_device mxc_spi_device2;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
extern struct platform_device imx_ssi_device1;
extern struct platform_device imx_wdt_device0;

166
arch/arm/mach-mx3/mach-armadillo5x0.c
View File

@ -36,6 +36,9 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -52,6 +55,8 @@
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices.h"
#include "crm_regs.h"
@ -103,8 +108,158 @@ static int armadillo5x0_pins[] = {
/* I2C2 */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
/* OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
/* USB host 2 */
IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
/* USB */
#if defined(CONFIG_USB_ULPI)
#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int usbotg_init(struct platform_device *pdev)
{
int err;
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
/* Chip already enabled by hardware */
/* OTG phy reset*/
err = gpio_request(OTG_RESET, "USB-OTG-RESET");
if (err) {
pr_err("Failed to request the usb otg reset gpio\n");
return err;
}
err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
if (err) {
pr_err("Failed to reset the usb otg phy\n");
goto otg_free_reset;
}
gpio_set_value(OTG_RESET, 0/*LOW*/);
mdelay(5);
gpio_set_value(OTG_RESET, 1/*HIGH*/);
return 0;
otg_free_reset:
gpio_free(OTG_RESET);
return err;
}
static int usbh2_init(struct platform_device *pdev)
{
int err;
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
/* Enable the chip */
err = gpio_request(USBH2_CS, "USB-H2-CS");
if (err) {
pr_err("Failed to request the usb host 2 CS gpio\n");
return err;
}
err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
if (err) {
pr_err("Failed to drive the usb host 2 CS gpio\n");
goto h2_free_cs;
}
/* H2 phy reset*/
err = gpio_request(USBH2_RESET, "USB-H2-RESET");
if (err) {
pr_err("Failed to request the usb host 2 reset gpio\n");
goto h2_free_cs;
}
err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
if (err) {
pr_err("Failed to reset the usb host 2 phy\n");
goto h2_free_reset;
}
gpio_set_value(USBH2_RESET, 0/*LOW*/);
mdelay(5);
gpio_set_value(USBH2_RESET, 1/*HIGH*/);
return 0;
h2_free_reset:
gpio_free(USBH2_RESET);
h2_free_cs:
gpio_free(USBH2_CS);
return err;
}
static struct mxc_usbh_platform_data usbotg_pdata = {
.init = usbotg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
static struct mxc_usbh_platform_data usbh2_pdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif /* CONFIG_USB_ULPI */
/* RTC over I2C*/
#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
@ -393,6 +548,17 @@ static void __init armadillo5x0_init(void)
if (armadillo5x0_i2c_rtc.irq == 0)
pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
/* USB */
#if defined(CONFIG_USB_ULPI)
usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_otg_host, &usbotg_pdata);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
}
static void __init armadillo5x0_timer_init(void)

116
arch/arm/mach-mx3/mach-mx31_3ds.c
View File

@ -23,6 +23,9 @@
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/platform_device.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -31,26 +34,96 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
#include <mach/board-mx31pdk.h>
#include <mach/board-mx31_3ds.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/mxc_nand.h>
#include <mach/spi.h>
#include "devices.h"
/*!
* @file mx31pdk.c
* @file mx31_3ds.c
*
* @brief This file contains the board-specific initialization routines.
*
* @ingroup System
*/
static int mx31pdk_pins[] = {
static int mx31_3ds_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
/* SPI 1 */
MX31_PIN_CSPI2_SCLK__SCLK,
MX31_PIN_CSPI2_MOSI__MOSI,
MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI2_SS0__SS0,
MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
/* MC13783 IRQ */
IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
};
/* Regulators */
static struct regulator_init_data pwgtx_init = {
.constraints = {
.boot_on = 1,
.always_on = 1,
},
};
static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
{
.id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
.init_data = &pwgtx_init,
}, {
.id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
.init_data = &pwgtx_init,
},
};
/* MC13783 */
static struct mc13783_platform_data mc13783_pdata __initdata = {
.regulators = mx31_3ds_regulators,
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
.flags = MC13783_USE_REGULATOR,
};
/* SPI */
static int spi1_internal_chipselect[] = {
MXC_SPI_CS(0),
MXC_SPI_CS(2),
};
static struct spi_imx_master spi1_pdata = {
.chipselect = spi1_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
};
static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
{
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 1, /* SS2 */
.platform_data = &mc13783_pdata,
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
.mode = SPI_CS_HIGH,
},
};
/*
* NAND Flash
*/
static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
.width = 1,
.hw_ecc = 1,
#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
.flash_bbt = 1,
#endif
};
static struct imxuart_platform_data uart_pdata = {
@ -95,7 +168,7 @@ static struct platform_device smsc911x_device = {
* LEDs, switches, interrupts for Ethernet.
*/
static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
{
uint32_t imr_val;
uint32_t int_valid;
@ -163,7 +236,7 @@ static struct irq_chip expio_irq_chip = {
.unmask = expio_unmask_irq,
};
static int __init mx31pdk_init_expio(void)
static int __init mx31_3ds_init_expio(void)
{
int i;
int ret;
@ -176,7 +249,7 @@ static int __init mx31pdk_init_expio(void)
return -ENODEV;
}
pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
__raw_readw(CPLD_CODE_VER_REG));
/*
@ -201,7 +274,7 @@ static int __init mx31pdk_init_expio(void)
set_irq_flags(i, IRQF_VALID);
}
set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
return 0;
}
@ -209,7 +282,7 @@ static int __init mx31pdk_init_expio(void)
/*
* This structure defines the MX31 memory map.
*/
static struct map_desc mx31pdk_io_desc[] __initdata = {
static struct map_desc mx31_3ds_io_desc[] __initdata = {
{
.virtual = MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
@ -221,10 +294,10 @@ static struct map_desc mx31pdk_io_desc[] __initdata = {
/*
* Set up static virtual mappings.
*/
static void __init mx31pdk_map_io(void)
static void __init mx31_3ds_map_io(void)
{
mx31_map_io();
iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
}
/*!
@ -232,35 +305,40 @@ static void __init mx31pdk_map_io(void)
*/
static void __init mxc_board_init(void)
{
mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
"mx31pdk");
mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
"mx31_3ds");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
if (!mx31pdk_init_expio())
mxc_register_device(&mxc_spi_device1, &spi1_pdata);
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
if (!mx31_3ds_init_expio())
platform_device_register(&smsc911x_device);
}
static void __init mx31pdk_timer_init(void)
static void __init mx31_3ds_timer_init(void)
{
mx31_clocks_init(26000000);
}
static struct sys_timer mx31pdk_timer = {
.init = mx31pdk_timer_init,
static struct sys_timer mx31_3ds_timer = {
.init = mx31_3ds_timer_init,
};
/*
* The following uses standard kernel macros defined in arch.h in order to
* initialize __mach_desc_MX31PDK data structure.
* initialize __mach_desc_MX31_3DS data structure.
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31pdk_map_io,
.map_io = mx31_3ds_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31pdk_timer,
.timer = &mx31_3ds_timer,
MACHINE_END

1
arch/arm/mach-mx3/mach-mx31moboard.c
View File

@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fsl_devices.h>
#include <linux/gfp.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>

2
arch/arm/mach-mx3/mach-pcm037.c
View File

@ -35,7 +35,7 @@
#include <linux/can/platform/sja1000.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/fsl_devices.h>
#include <linux/gfp.h>
#include <media/soc_camera.h>

Some files were not shown because too many files have changed in this diff Show More