mirror of https://gitee.com/openkylin/linux.git
SPI NOR core changes:
- Ability to dump SFDP tables via sysfs - Support for erasing OTP regions on Winbond and similar flashes - Few API doc updates and fixes - Locking support for MX25L12805D SPI NOR controller drivers changes: - Use SPI_MODE_X_MASK in nxp-spifi - Intel Alder Lake-M SPI serial flash support -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmDVedQQHHZpZ25lc2hy QHRpLmNvbQAKCRDERh5FfJEW45dXB/9Cn4xhHr73JZX54XDXQIgR7cFGbgXzZI+W nrzLsCCpt0RrVwYQBXv8f6IY7u4uEgH+dhsXMruY+gYDh+NJoj9REMRr3PwWhH5o R/ajQsDsBuGmtQ+I8RDpHYCQaNtgHqpnBQ+qmErbdK3FMxOyQ9gQkDC5097NDu4e QXTaMJbRHsxTt8U7qRO/3XIEW10GHq33gftBcZD/DrKcTIO9GT6GGi9aGN9YPsv4 zDpjgOjZyqzJndgHavTQKxVC9csuQIUFcA2fgHO3rEaiF/TLUXemJAmrEMziVDS2 7c8KgtAssHRJdjCqUn6A0/JomNdxFzGPVN2bWf4/aLgnacXmn0Xe =acH1 -----END PGP SIGNATURE----- Merge tag 'spi-nor/for-5.14' into mtd/next SPI NOR core changes: - Ability to dump SFDP tables via sysfs - Support for erasing OTP regions on Winbond and similar flashes - Few API doc updates and fixes - Locking support for MX25L12805D SPI NOR controller drivers changes: - Use SPI_MODE_X_MASK in nxp-spifi - Intel Alder Lake-M SPI serial flash support
This commit is contained in:
Miquel Raynal
commit
0bcc3939c9
1
.mailmap
1
.mailmap
|
|
@ -160,6 +160,7 @@ Jeff Layton <jlayton@kernel.org> <jlayton@primarydata.com>
|
|||
Jeff Layton <jlayton@kernel.org> <jlayton@redhat.com>
|
||||
Jens Axboe <axboe@suse.de>
|
||||
Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
|
||||
Jernej Skrabec <jernej.skrabec@gmail.com> <jernej.skrabec@siol.net>
|
||||
Jiri Slaby <jirislaby@kernel.org> <jirislaby@gmail.com>
|
||||
Jiri Slaby <jirislaby@kernel.org> <jslaby@novell.com>
|
||||
Jiri Slaby <jirislaby@kernel.org> <jslaby@suse.com>
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
What: /sys/class/dax/
|
||||
Date: May, 2016
|
||||
KernelVersion: v4.7
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description: Device DAX is the device-centric analogue of Filesystem
|
||||
DAX (CONFIG_FS_DAX). It allows memory ranges to be
|
||||
allocated and mapped without need of an intervening file
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
This ABI is renamed and moved to a new location /sys/kernel/fadump/registered.¬
|
||||
This ABI is renamed and moved to a new location /sys/kernel/fadump/registered.
|
||||
|
||||
What: /sys/kernel/fadump_registered
|
||||
Date: Feb 2012
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
This ABI is renamed and moved to a new location /sys/kernel/fadump/release_mem.¬
|
||||
This ABI is renamed and moved to a new location /sys/kernel/fadump/release_mem.
|
||||
|
||||
What: /sys/kernel/fadump_release_mem
|
||||
Date: Feb 2012
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
What: /sys/bus/nd/devices/regionX/nfit/ecc_unit_size
|
||||
Date: Aug, 2017
|
||||
KernelVersion: v4.14 (Removed v4.18)
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) Size of a write request to a DIMM that will not incur a
|
||||
read-modify-write cycle at the memory controller.
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ Interface Table (NFIT)' section in the ACPI specification
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/serial
|
||||
Date: Jun, 2015
|
||||
KernelVersion: v4.2
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) Serial number of the NVDIMM (non-volatile dual in-line
|
||||
memory module), assigned by the module vendor.
|
||||
|
|
@ -14,7 +14,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/handle
|
||||
Date: Apr, 2015
|
||||
KernelVersion: v4.2
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) The address (given by the _ADR object) of the device on its
|
||||
parent bus of the NVDIMM device containing the NVDIMM region.
|
||||
|
|
@ -23,7 +23,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/device
|
||||
Date: Apr, 2015
|
||||
KernelVersion: v4.1
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) Device id for the NVDIMM, assigned by the module vendor.
|
||||
|
||||
|
|
@ -31,7 +31,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/rev_id
|
||||
Date: Jun, 2015
|
||||
KernelVersion: v4.2
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) Revision of the NVDIMM, assigned by the module vendor.
|
||||
|
||||
|
|
@ -39,7 +39,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/phys_id
|
||||
Date: Apr, 2015
|
||||
KernelVersion: v4.2
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) Handle (i.e., instance number) for the SMBIOS (system
|
||||
management BIOS) Memory Device structure describing the NVDIMM
|
||||
|
|
@ -49,7 +49,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/flags
|
||||
Date: Jun, 2015
|
||||
KernelVersion: v4.2
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) The flags in the NFIT memory device sub-structure indicate
|
||||
the state of the data on the nvdimm relative to its energy
|
||||
|
|
@ -68,7 +68,7 @@ What: /sys/bus/nd/devices/nmemX/nfit/format1
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/formats
|
||||
Date: Apr, 2016
|
||||
KernelVersion: v4.7
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) The interface codes indicate support for persistent memory
|
||||
mapped directly into system physical address space and / or a
|
||||
|
|
@ -84,7 +84,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/vendor
|
||||
Date: Apr, 2016
|
||||
KernelVersion: v4.7
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) Vendor id of the NVDIMM.
|
||||
|
||||
|
|
@ -92,7 +92,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/dsm_mask
|
||||
Date: May, 2016
|
||||
KernelVersion: v4.7
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) The bitmask indicates the supported device specific control
|
||||
functions relative to the NVDIMM command family supported by the
|
||||
|
|
@ -102,7 +102,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/family
|
||||
Date: Apr, 2016
|
||||
KernelVersion: v4.7
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) Displays the NVDIMM family command sets. Values
|
||||
0, 1, 2 and 3 correspond to NVDIMM_FAMILY_INTEL,
|
||||
|
|
@ -118,7 +118,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/id
|
||||
Date: Apr, 2016
|
||||
KernelVersion: v4.7
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) ACPI specification 6.2 section 5.2.25.9, defines an
|
||||
identifier for an NVDIMM, which refelects the id attribute.
|
||||
|
|
@ -127,7 +127,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/subsystem_vendor
|
||||
Date: Apr, 2016
|
||||
KernelVersion: v4.7
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) Sub-system vendor id of the NVDIMM non-volatile memory
|
||||
subsystem controller.
|
||||
|
|
@ -136,7 +136,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/subsystem_rev_id
|
||||
Date: Apr, 2016
|
||||
KernelVersion: v4.7
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) Sub-system revision id of the NVDIMM non-volatile memory subsystem
|
||||
controller, assigned by the non-volatile memory subsystem
|
||||
|
|
@ -146,7 +146,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/nfit/subsystem_device
|
||||
Date: Apr, 2016
|
||||
KernelVersion: v4.7
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) Sub-system device id for the NVDIMM non-volatile memory
|
||||
subsystem controller, assigned by the non-volatile memory
|
||||
|
|
@ -156,7 +156,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/ndbusX/nfit/revision
|
||||
Date: Jun, 2015
|
||||
KernelVersion: v4.2
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) ACPI NFIT table revision number.
|
||||
|
||||
|
|
@ -164,7 +164,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/ndbusX/nfit/scrub
|
||||
Date: Sep, 2016
|
||||
KernelVersion: v4.9
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RW) This shows the number of full Address Range Scrubs (ARS)
|
||||
that have been completed since driver load time. Userspace can
|
||||
|
|
@ -177,7 +177,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/ndbusX/nfit/hw_error_scrub
|
||||
Date: Sep, 2016
|
||||
KernelVersion: v4.9
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RW) Provides a way to toggle the behavior between just adding
|
||||
the address (cache line) where the MCE happened to the poison
|
||||
|
|
@ -196,7 +196,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/ndbusX/nfit/dsm_mask
|
||||
Date: Jun, 2017
|
||||
KernelVersion: v4.13
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) The bitmask indicates the supported bus specific control
|
||||
functions. See the section named 'NVDIMM Root Device _DSMs' in
|
||||
|
|
@ -205,7 +205,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/ndbusX/nfit/firmware_activate_noidle
|
||||
Date: Apr, 2020
|
||||
KernelVersion: v5.8
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RW) The Intel platform implementation of firmware activate
|
||||
support exposes an option let the platform force idle devices in
|
||||
|
|
@ -225,7 +225,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/regionX/nfit/range_index
|
||||
Date: Jun, 2015
|
||||
KernelVersion: v4.2
|
||||
Contact: linux-nvdimm@lists.01.org
|
||||
Contact: nvdimm@lists.linux.dev
|
||||
Description:
|
||||
(RO) A unique number provided by the BIOS to identify an address
|
||||
range. Used by NVDIMM Region Mapping Structure to uniquely refer
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
What: /sys/bus/nd/devices/nmemX/papr/flags
|
||||
Date: Apr, 2020
|
||||
KernelVersion: v5.8
|
||||
Contact: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org,
|
||||
Contact: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, nvdimm@lists.linux.dev,
|
||||
Description:
|
||||
(RO) Report flags indicating various states of a
|
||||
papr-pmem NVDIMM device. Each flag maps to a one or
|
||||
|
|
@ -36,7 +36,7 @@ Description:
|
|||
What: /sys/bus/nd/devices/nmemX/papr/perf_stats
|
||||
Date: May, 2020
|
||||
KernelVersion: v5.9
|
||||
Contact: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org,
|
||||
Contact: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, nvdimm@lists.linux.dev,
|
||||
Description:
|
||||
(RO) Report various performance stats related to papr-scm NVDIMM
|
||||
device. Each stat is reported on a new line with each line
|
||||
|
|
|
|||
|
|
@ -0,0 +1,31 @@
|
|||
What: /sys/bus/spi/devices/.../spi-nor/jedec_id
|
||||
Date: April 2021
|
||||
KernelVersion: 5.14
|
||||
Contact: linux-mtd@lists.infradead.org
|
||||
Description: (RO) The JEDEC ID of the SPI NOR flash as reported by the
|
||||
flash device.
|
||||
|
||||
|
||||
What: /sys/bus/spi/devices/.../spi-nor/manufacturer
|
||||
Date: April 2021
|
||||
KernelVersion: 5.14
|
||||
Contact: linux-mtd@lists.infradead.org
|
||||
Description: (RO) Manufacturer of the SPI NOR flash.
|
||||
|
||||
|
||||
What: /sys/bus/spi/devices/.../spi-nor/partname
|
||||
Date: April 2021
|
||||
KernelVersion: 5.14
|
||||
Contact: linux-mtd@lists.infradead.org
|
||||
Description: (RO) Part name of the SPI NOR flash.
|
||||
|
||||
|
||||
What: /sys/bus/spi/devices/.../spi-nor/sfdp
|
||||
Date: April 2021
|
||||
KernelVersion: 5.14
|
||||
Contact: linux-mtd@lists.infradead.org
|
||||
Description: (RO) This attribute is only present if the SPI NOR flash
|
||||
device supports the "Read SFDP" command (5Ah).
|
||||
|
||||
If present, it contains the complete SFDP (serial flash
|
||||
discoverable parameters) binary data of the flash.
|
||||
|
|
@ -37,13 +37,13 @@ Description: Maximum time allowed for periodic transfers per microframe (μs)
|
|||
|
||||
What: /sys/module/*/{coresize,initsize}
|
||||
Date: Jan 2012
|
||||
KernelVersion:»·3.3
|
||||
KernelVersion: 3.3
|
||||
Contact: Kay Sievers <kay.sievers@vrfy.org>
|
||||
Description: Module size in bytes.
|
||||
|
||||
What: /sys/module/*/taint
|
||||
Date: Jan 2012
|
||||
KernelVersion:»·3.3
|
||||
KernelVersion: 3.3
|
||||
Contact: Kay Sievers <kay.sievers@vrfy.org>
|
||||
Description: Module taint flags:
|
||||
== =====================
|
||||
|
|
|
|||
|
|
@ -483,10 +483,11 @@ modprobe
|
|||
========
|
||||
|
||||
The full path to the usermode helper for autoloading kernel modules,
|
||||
by default "/sbin/modprobe". This binary is executed when the kernel
|
||||
requests a module. For example, if userspace passes an unknown
|
||||
filesystem type to mount(), then the kernel will automatically request
|
||||
the corresponding filesystem module by executing this usermode helper.
|
||||
by default ``CONFIG_MODPROBE_PATH``, which in turn defaults to
|
||||
"/sbin/modprobe". This binary is executed when the kernel requests a
|
||||
module. For example, if userspace passes an unknown filesystem type
|
||||
to mount(), then the kernel will automatically request the
|
||||
corresponding filesystem module by executing this usermode helper.
|
||||
This usermode helper should insert the needed module into the kernel.
|
||||
|
||||
This sysctl only affects module autoloading. It has no effect on the
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
==============
|
||||
==============
|
||||
Data Integrity
|
||||
==============
|
||||
|
||||
|
|
|
|||
|
|
@ -146,18 +146,18 @@ with the kernel as a block device by registering the following general
|
|||
*struct file_operations*::
|
||||
|
||||
struct file_operations cdrom_fops = {
|
||||
NULL, /∗ lseek ∗/
|
||||
block _read , /∗ read—general block-dev read ∗/
|
||||
block _write, /∗ write—general block-dev write ∗/
|
||||
NULL, /∗ readdir ∗/
|
||||
NULL, /∗ select ∗/
|
||||
cdrom_ioctl, /∗ ioctl ∗/
|
||||
NULL, /∗ mmap ∗/
|
||||
cdrom_open, /∗ open ∗/
|
||||
cdrom_release, /∗ release ∗/
|
||||
NULL, /∗ fsync ∗/
|
||||
NULL, /∗ fasync ∗/
|
||||
NULL /∗ revalidate ∗/
|
||||
NULL, /* lseek */
|
||||
block _read , /* read--general block-dev read */
|
||||
block _write, /* write--general block-dev write */
|
||||
NULL, /* readdir */
|
||||
NULL, /* select */
|
||||
cdrom_ioctl, /* ioctl */
|
||||
NULL, /* mmap */
|
||||
cdrom_open, /* open */
|
||||
cdrom_release, /* release */
|
||||
NULL, /* fsync */
|
||||
NULL, /* fasync */
|
||||
NULL /* revalidate */
|
||||
};
|
||||
|
||||
Every active CD-ROM device shares this *struct*. The routines
|
||||
|
|
@ -250,12 +250,12 @@ The drive-specific, minor-like information that is registered with
|
|||
`cdrom.c`, currently contains the following fields::
|
||||
|
||||
struct cdrom_device_info {
|
||||
const struct cdrom_device_ops * ops; /* device operations for this major */
|
||||
const struct cdrom_device_ops * ops; /* device operations for this major */
|
||||
struct list_head list; /* linked list of all device_info */
|
||||
struct gendisk * disk; /* matching block layer disk */
|
||||
void * handle; /* driver-dependent data */
|
||||
|
||||
int mask; /* mask of capability: disables them */
|
||||
int mask; /* mask of capability: disables them */
|
||||
int speed; /* maximum speed for reading data */
|
||||
int capacity; /* number of discs in a jukebox */
|
||||
|
||||
|
|
@ -569,7 +569,7 @@ the *CDC_CLOSE_TRAY* bit in *mask*.
|
|||
|
||||
In the file `cdrom.c` you will encounter many constructions of the type::
|
||||
|
||||
if (cdo->capability & ∼cdi->mask & CDC _⟨capability⟩) ...
|
||||
if (cdo->capability & ~cdi->mask & CDC _<capability>) ...
|
||||
|
||||
There is no *ioctl* to set the mask... The reason is that
|
||||
I think it is better to control the **behavior** rather than the
|
||||
|
|
|
|||
|
|
@ -60,7 +60,6 @@ properties:
|
|||
maxItems: 2
|
||||
|
||||
idt,xtal-load-femtofarads:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 9000
|
||||
maximum: 22760
|
||||
description: Optional load capacitor for XTAL1 and XTAL2
|
||||
|
|
@ -84,7 +83,6 @@ patternProperties:
|
|||
enum: [ 1800000, 2500000, 3300000 ]
|
||||
idt,slew-percent:
|
||||
description: The Slew rate control for CMOS single-ended.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [ 80, 85, 90, 100 ]
|
||||
|
||||
required:
|
||||
|
|
|
|||
|
|
@ -102,7 +102,6 @@ patternProperties:
|
|||
|
||||
st,adc-channel-names:
|
||||
description: List of single-ended channel names.
|
||||
$ref: /schemas/types.yaml#/definitions/string-array
|
||||
|
||||
st,filter-order:
|
||||
description: |
|
||||
|
|
|
|||
|
|
@ -38,6 +38,5 @@ properties:
|
|||
Duration in seconds which the key should be kept pressed for device to
|
||||
reset automatically. Device with key pressed reset feature can specify
|
||||
this property.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
additionalProperties: true
|
||||
|
|
|
|||
|
|
@ -92,7 +92,6 @@ properties:
|
|||
this interconnect to send RPMh commands.
|
||||
|
||||
qcom,bcm-voter-names:
|
||||
$ref: /schemas/types.yaml#/definitions/string-array
|
||||
description: |
|
||||
Names for each of the qcom,bcm-voters specified.
|
||||
|
||||
|
|
|
|||
|
|
@ -4,8 +4,8 @@ This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
|
|||
In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
|
||||
However, on some devices there are Serial LEDs (LEDs connected to a 74x164
|
||||
controller), which can either be controlled by software (exporting the 74x164
|
||||
as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
|
||||
by hardware using this driver.
|
||||
as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml),
|
||||
or by hardware using this driver.
|
||||
Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
|
||||
exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
|
||||
controlled, so the only chance to keep them working is by using this driver.
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller
|
|||
This controller is present on BCM6358 and BCM6368.
|
||||
In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
|
||||
which can either be controlled by software (exporting the 74x164 as spi-gpio.
|
||||
See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
|
||||
See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or
|
||||
by hardware using this driver.
|
||||
|
||||
Required properties:
|
||||
|
|
|
|||
|
|
@ -99,32 +99,26 @@ properties:
|
|||
Indicates that the channel acts as primary among the bonded channels.
|
||||
|
||||
port:
|
||||
type: object
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
unevaluatedProperties: false
|
||||
description:
|
||||
Child port node corresponding to the data input, in accordance with the
|
||||
video interface bindings defined in
|
||||
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
||||
The port node must contain at least one endpoint.
|
||||
Child port node corresponding to the data input. The port node must
|
||||
contain at least one endpoint.
|
||||
|
||||
properties:
|
||||
endpoint:
|
||||
type: object
|
||||
$ref: /schemas/graph.yaml#/$defs/endpoint-base
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
remote-endpoint:
|
||||
description:
|
||||
A phandle to the remote tuner endpoint subnode in remote node
|
||||
port.
|
||||
|
||||
sync-active:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1]
|
||||
description:
|
||||
Indicates sync signal polarity, 0/1 for low/high respectively.
|
||||
This property maps to SYNCAC bit in the hardware manual. The
|
||||
default is 1 (active high).
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
|
|
|||
|
|
@ -105,7 +105,6 @@ properties:
|
|||
- description: Whether the IPA clock is enabled (if valid)
|
||||
|
||||
qcom,smem-state-names:
|
||||
$ref: /schemas/types.yaml#/definitions/string-array
|
||||
description: The names of the state bits used for SMP2P output
|
||||
items:
|
||||
- const: ipa-clock-enabled-valid
|
||||
|
|
|
|||
|
|
@ -9,7 +9,6 @@ Required properties:
|
|||
"mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173
|
||||
"mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
|
||||
"mediatek,mt8516-efuse", "mediatek,efuse": for MT8516
|
||||
"mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
|
||||
- reg: Should contain registers location and length
|
||||
|
||||
= Data cells =
|
||||
|
|
|
|||
|
|
@ -118,7 +118,7 @@ patternProperties:
|
|||
description:
|
||||
Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
|
||||
EXTERNAL_SSC or INTERNAL_SSC.
|
||||
Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used.
|
||||
Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2]
|
||||
default: 0
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ properties:
|
|||
maxItems: 1
|
||||
|
||||
phys:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
maxItems: 1
|
||||
description: phandle to the USB phy
|
||||
|
||||
monitored-battery:
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@ properties:
|
|||
maxItems: 1
|
||||
|
||||
memory-region:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
maxItems: 1
|
||||
description:
|
||||
phandle to a node describing reserved memory (System RAM memory)
|
||||
The M core can't access all the DDR memory space on some platform,
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@ LIBNVDIMM: Non-Volatile Devices
|
|||
|
||||
libnvdimm - kernel / libndctl - userspace helper library
|
||||
|
||||
linux-nvdimm@lists.01.org
|
||||
nvdimm@lists.linux.dev
|
||||
|
||||
Version 13
|
||||
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ Serial drivers
|
|||
|
||||
moxa-smartio
|
||||
n_gsm
|
||||
rocket
|
||||
serial-iso7816
|
||||
serial-rs485
|
||||
|
||||
|
|
|
|||
|
|
@ -109,16 +109,19 @@ well as to make sure they aren't relying on some HCD-specific behavior.
|
|||
USB-Standard Types
|
||||
==================
|
||||
|
||||
In ``drivers/usb/common/common.c`` and ``drivers/usb/common/debug.c`` you
|
||||
will find the USB data types defined in chapter 9 of the USB specification.
|
||||
These data types are used throughout USB, and in APIs including this host
|
||||
side API, gadget APIs, usb character devices and debugfs interfaces.
|
||||
In ``include/uapi/linux/usb/ch9.h`` you will find the USB data types defined
|
||||
in chapter 9 of the USB specification. These data types are used throughout
|
||||
USB, and in APIs including this host side API, gadget APIs, usb character
|
||||
devices and debugfs interfaces. That file is itself included by
|
||||
``include/linux/usb/ch9.h``, which also contains declarations of a few
|
||||
utility routines for manipulating these data types; the implementations
|
||||
are in ``drivers/usb/common/common.c``.
|
||||
|
||||
.. kernel-doc:: drivers/usb/common/common.c
|
||||
:export:
|
||||
|
||||
.. kernel-doc:: drivers/usb/common/debug.c
|
||||
:export:
|
||||
In addition, some functions useful for creating debugging output are
|
||||
defined in ``drivers/usb/common/debug.c``.
|
||||
|
||||
Host-Side Data Types and Macros
|
||||
===============================
|
||||
|
|
|
|||
|
|
@ -50,8 +50,8 @@ Here is the main features of EROFS:
|
|||
|
||||
- Support POSIX.1e ACLs by using xattrs;
|
||||
|
||||
- Support transparent file compression as an option:
|
||||
LZ4 algorithm with 4 KB fixed-sized output compression for high performance.
|
||||
- Support transparent data compression as an option:
|
||||
LZ4 algorithm with the fixed-sized output compression for high performance.
|
||||
|
||||
The following git tree provides the file system user-space tools under
|
||||
development (ex, formatting tool mkfs.erofs):
|
||||
|
|
@ -113,31 +113,31 @@ may not. All metadatas can be now observed in two different spaces (views):
|
|||
|
||||
::
|
||||
|
||||
|-> aligned with 8B
|
||||
|-> followed closely
|
||||
+ meta_blkaddr blocks |-> another slot
|
||||
_____________________________________________________________________
|
||||
| ... | inode | xattrs | extents | data inline | ... | inode ...
|
||||
|________|_______|(optional)|(optional)|__(optional)_|_____|__________
|
||||
|-> aligned with the inode slot size
|
||||
. .
|
||||
. .
|
||||
. .
|
||||
. .
|
||||
. .
|
||||
. .
|
||||
.____________________________________________________|-> aligned with 4B
|
||||
| xattr_ibody_header | shared xattrs | inline xattrs |
|
||||
|____________________|_______________|_______________|
|
||||
|-> 12 bytes <-|->x * 4 bytes<-| .
|
||||
. . .
|
||||
. . .
|
||||
. . .
|
||||
._______________________________.______________________.
|
||||
| id | id | id | id | ... | id | ent | ... | ent| ... |
|
||||
|____|____|____|____|______|____|_____|_____|____|_____|
|
||||
|-> aligned with 4B
|
||||
|-> aligned with 4B
|
||||
|-> aligned with 8B
|
||||
|-> followed closely
|
||||
+ meta_blkaddr blocks |-> another slot
|
||||
_____________________________________________________________________
|
||||
| ... | inode | xattrs | extents | data inline | ... | inode ...
|
||||
|________|_______|(optional)|(optional)|__(optional)_|_____|__________
|
||||
|-> aligned with the inode slot size
|
||||
. .
|
||||
. .
|
||||
. .
|
||||
. .
|
||||
. .
|
||||
. .
|
||||
.____________________________________________________|-> aligned with 4B
|
||||
| xattr_ibody_header | shared xattrs | inline xattrs |
|
||||
|____________________|_______________|_______________|
|
||||
|-> 12 bytes <-|->x * 4 bytes<-| .
|
||||
. . .
|
||||
. . .
|
||||
. . .
|
||||
._______________________________.______________________.
|
||||
| id | id | id | id | ... | id | ent | ... | ent| ... |
|
||||
|____|____|____|____|______|____|_____|_____|____|_____|
|
||||
|-> aligned with 4B
|
||||
|-> aligned with 4B
|
||||
|
||||
Inode could be 32 or 64 bytes, which can be distinguished from a common
|
||||
field which all inode versions have -- i_format::
|
||||
|
|
@ -175,13 +175,13 @@ may not. All metadatas can be now observed in two different spaces (views):
|
|||
Each share xattr can also be directly found by the following formula:
|
||||
xattr offset = xattr_blkaddr * block_size + 4 * xattr_id
|
||||
|
||||
::
|
||||
::
|
||||
|
||||
|-> aligned by 4 bytes
|
||||
+ xattr_blkaddr blocks |-> aligned with 4 bytes
|
||||
_________________________________________________________________________
|
||||
| ... | xattr_entry | xattr data | ... | xattr_entry | xattr data ...
|
||||
|________|_____________|_____________|_____|______________|_______________
|
||||
|-> aligned by 4 bytes
|
||||
+ xattr_blkaddr blocks |-> aligned with 4 bytes
|
||||
_________________________________________________________________________
|
||||
| ... | xattr_entry | xattr data | ... | xattr_entry | xattr data ...
|
||||
|________|_____________|_____________|_____|______________|_______________
|
||||
|
||||
Directories
|
||||
-----------
|
||||
|
|
@ -193,48 +193,77 @@ algorithm (could refer to the related source code).
|
|||
|
||||
::
|
||||
|
||||
___________________________
|
||||
/ |
|
||||
/ ______________|________________
|
||||
/ / | nameoff1 | nameoffN-1
|
||||
____________.______________._______________v________________v__________
|
||||
| dirent | dirent | ... | dirent | filename | filename | ... | filename |
|
||||
|___.0___|____1___|_____|___N-1__|____0_____|____1_____|_____|___N-1____|
|
||||
\ ^
|
||||
\ | * could have
|
||||
\ | trailing '\0'
|
||||
\________________________| nameoff0
|
||||
|
||||
Directory block
|
||||
___________________________
|
||||
/ |
|
||||
/ ______________|________________
|
||||
/ / | nameoff1 | nameoffN-1
|
||||
____________.______________._______________v________________v__________
|
||||
| dirent | dirent | ... | dirent | filename | filename | ... | filename |
|
||||
|___.0___|____1___|_____|___N-1__|____0_____|____1_____|_____|___N-1____|
|
||||
\ ^
|
||||
\ | * could have
|
||||
\ | trailing '\0'
|
||||
\________________________| nameoff0
|
||||
Directory block
|
||||
|
||||
Note that apart from the offset of the first filename, nameoff0 also indicates
|
||||
the total number of directory entries in this block since it is no need to
|
||||
introduce another on-disk field at all.
|
||||
|
||||
Compression
|
||||
-----------
|
||||
Currently, EROFS supports 4KB fixed-sized output transparent file compression,
|
||||
as illustrated below::
|
||||
Data compression
|
||||
----------------
|
||||
EROFS implements LZ4 fixed-sized output compression which generates fixed-sized
|
||||
compressed data blocks from variable-sized input in contrast to other existing
|
||||
fixed-sized input solutions. Relatively higher compression ratios can be gotten
|
||||
by using fixed-sized output compression since nowadays popular data compression
|
||||
algorithms are mostly LZ77-based and such fixed-sized output approach can be
|
||||
benefited from the historical dictionary (aka. sliding window).
|
||||
|
||||
|---- Variant-Length Extent ----|-------- VLE --------|----- VLE -----
|
||||
clusterofs clusterofs clusterofs
|
||||
| | | logical data
|
||||
_________v_______________________________v_____________________v_______________
|
||||
... | . | | . | | . | ...
|
||||
____|____.________|_____________|________.____|_____________|__.__________|____
|
||||
|-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|
|
||||
size size size size size
|
||||
. . . .
|
||||
. . . .
|
||||
. . . .
|
||||
_______._____________._____________._____________._____________________
|
||||
... | | | | ... physical data
|
||||
_______|_____________|_____________|_____________|_____________________
|
||||
|-> cluster <-|-> cluster <-|-> cluster <-|
|
||||
size size size
|
||||
In details, original (uncompressed) data is turned into several variable-sized
|
||||
extents and in the meanwhile, compressed into physical clusters (pclusters).
|
||||
In order to record each variable-sized extent, logical clusters (lclusters) are
|
||||
introduced as the basic unit of compress indexes to indicate whether a new
|
||||
extent is generated within the range (HEAD) or not (NONHEAD). Lclusters are now
|
||||
fixed in block size, as illustrated below::
|
||||
|
||||
Currently each on-disk physical cluster can contain 4KB (un)compressed data
|
||||
at most. For each logical cluster, there is a corresponding on-disk index to
|
||||
describe its cluster type, physical cluster address, etc.
|
||||
|<- variable-sized extent ->|<- VLE ->|
|
||||
clusterofs clusterofs clusterofs
|
||||
| | |
|
||||
_________v_________________________________v_______________________v________
|
||||
... | . | | . | | . ...
|
||||
____|____._________|______________|________.___ _|______________|__.________
|
||||
|-> lcluster <-|-> lcluster <-|-> lcluster <-|-> lcluster <-|
|
||||
(HEAD) (NONHEAD) (HEAD) (NONHEAD) .
|
||||
. CBLKCNT . .
|
||||
. . .
|
||||
. . .
|
||||
_______._____________________________.______________._________________
|
||||
... | | | | ...
|
||||
_______|______________|______________|______________|_________________
|
||||
|-> big pcluster <-|-> pcluster <-|
|
||||
|
||||
See "struct z_erofs_vle_decompressed_index" in erofs_fs.h for more details.
|
||||
A physical cluster can be seen as a container of physical compressed blocks
|
||||
which contains compressed data. Previously, only lcluster-sized (4KB) pclusters
|
||||
were supported. After big pcluster feature is introduced (available since
|
||||
Linux v5.13), pcluster can be a multiple of lcluster size.
|
||||
|
||||
For each HEAD lcluster, clusterofs is recorded to indicate where a new extent
|
||||
starts and blkaddr is used to seek the compressed data. For each NONHEAD
|
||||
lcluster, delta0 and delta1 are available instead of blkaddr to indicate the
|
||||
distance to its HEAD lcluster and the next HEAD lcluster. A PLAIN lcluster is
|
||||
also a HEAD lcluster except that its data is uncompressed. See the comments
|
||||
around "struct z_erofs_vle_decompressed_index" in erofs_fs.h for more details.
|
||||
|
||||
If big pcluster is enabled, pcluster size in lclusters needs to be recorded as
|
||||
well. Let the delta0 of the first NONHEAD lcluster store the compressed block
|
||||
count with a special flag as a new called CBLKCNT NONHEAD lcluster. It's easy
|
||||
to understand its delta0 is constantly 1, as illustrated below::
|
||||
|
||||
__________________________________________________________
|
||||
| HEAD | NONHEAD | NONHEAD | ... | NONHEAD | HEAD | HEAD |
|
||||
|__:___|_(CBLKCNT)_|_________|_____|_________|__:___|____:_|
|
||||
|<----- a big pcluster (with CBLKCNT) ------>|<-- -->|
|
||||
a lcluster-sized pcluster (without CBLKCNT) ^
|
||||
|
||||
If another HEAD follows a HEAD lcluster, there is no room to record CBLKCNT,
|
||||
but it's easy to know the size of such pcluster is 1 lcluster as well.
|
||||
|
|
|
|||
|
|
@ -21,10 +21,10 @@ Description
|
|||
The TMP103 is a digital output temperature sensor in a four-ball
|
||||
wafer chip-scale package (WCSP). The TMP103 is capable of reading
|
||||
temperatures to a resolution of 1°C. The TMP103 is specified for
|
||||
operation over a temperature range of –40°C to +125°C.
|
||||
operation over a temperature range of -40°C to +125°C.
|
||||
|
||||
Resolution: 8 Bits
|
||||
Accuracy: ±1°C Typ (–10°C to +100°C)
|
||||
Accuracy: ±1°C Typ (-10°C to +100°C)
|
||||
|
||||
The driver provides the common sysfs-interface for temperatures (see
|
||||
Documentation/hwmon/sysfs-interface.rst under Temperatures).
|
||||
|
|
|
|||
|
|
@ -173,7 +173,7 @@ Director rule is added from ethtool (Sideband filter), ATR is turned off by the
|
|||
driver. To re-enable ATR, the sideband can be disabled with the ethtool -K
|
||||
option. For example::
|
||||
|
||||
ethtool –K [adapter] ntuple [off|on]
|
||||
ethtool -K [adapter] ntuple [off|on]
|
||||
|
||||
If sideband is re-enabled after ATR is re-enabled, ATR remains enabled until a
|
||||
TCP-IP flow is added. When all TCP-IP sideband rules are deleted, ATR is
|
||||
|
|
@ -688,7 +688,7 @@ shaper bw_rlimit: for each tc, sets minimum and maximum bandwidth rates.
|
|||
Totals must be equal or less than port speed.
|
||||
|
||||
For example: min_rate 1Gbit 3Gbit: Verify bandwidth limit using network
|
||||
monitoring tools such as ifstat or sar –n DEV [interval] [number of samples]
|
||||
monitoring tools such as `ifstat` or `sar -n DEV [interval] [number of samples]`
|
||||
|
||||
2. Enable HW TC offload on interface::
|
||||
|
||||
|
|
|
|||
|
|
@ -179,7 +179,7 @@ shaper bw_rlimit: for each tc, sets minimum and maximum bandwidth rates.
|
|||
Totals must be equal or less than port speed.
|
||||
|
||||
For example: min_rate 1Gbit 3Gbit: Verify bandwidth limit using network
|
||||
monitoring tools such as ifstat or sar –n DEV [interval] [number of samples]
|
||||
monitoring tools such as ``ifstat`` or ``sar -n DEV [interval] [number of samples]``
|
||||
|
||||
NOTE:
|
||||
Setting up channels via ethtool (ethtool -L) is not supported when the
|
||||
|
|
|
|||
|
|
@ -109,6 +109,16 @@ auxiliary vector.
|
|||
|
||||
scv 0 syscalls will always behave as PPC_FEATURE2_HTM_NOSC.
|
||||
|
||||
ptrace
|
||||
------
|
||||
When ptracing system calls (PTRACE_SYSCALL), the pt_regs.trap value contains
|
||||
the system call type that can be used to distinguish between sc and scv 0
|
||||
system calls, and the different register conventions can be accounted for.
|
||||
|
||||
If the value of (pt_regs.trap & 0xfff0) is 0xc00 then the system call was
|
||||
performed with the sc instruction, if it is 0x3000 then the system call was
|
||||
performed with the scv 0 instruction.
|
||||
|
||||
vsyscall
|
||||
========
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
.. _process_statement_kernel:
|
||||
.. _process_statement_kernel:
|
||||
|
||||
Linux Kernel Enforcement Statement
|
||||
----------------------------------
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
=============================
|
||||
=============================
|
||||
Virtual TPM interface for Xen
|
||||
=============================
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
======================================
|
||||
======================================
|
||||
NO_HZ: Reducing Scheduling-Clock Ticks
|
||||
======================================
|
||||
|
||||
|
|
|
|||
|
|
@ -1,50 +0,0 @@
|
|||
Chinese translated version of Documentation/admin-guide/security-bugs.rst
|
||||
|
||||
If you have any comment or update to the content, please contact the
|
||||
original document maintainer directly. However, if you have a problem
|
||||
communicating in English you can also ask the Chinese maintainer for
|
||||
help. Contact the Chinese maintainer if this translation is outdated
|
||||
or if there is a problem with the translation.
|
||||
|
||||
Chinese maintainer: Harry Wei <harryxiyou@gmail.com>
|
||||
---------------------------------------------------------------------
|
||||
Documentation/admin-guide/security-bugs.rst 的中文翻译
|
||||
|
||||
如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
|
||||
交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
|
||||
译存在问题，请联系中文版维护者。
|
||||
|
||||
中文版维护者： 贾威威 Harry Wei <harryxiyou@gmail.com>
|
||||
中文版翻译者： 贾威威 Harry Wei <harryxiyou@gmail.com>
|
||||
中文版校译者： 贾威威 Harry Wei <harryxiyou@gmail.com>
|
||||
|
||||
|
||||
以下为正文
|
||||
---------------------------------------------------------------------
|
||||
Linux内核开发者认为安全非常重要。因此，我们想要知道当一个有关于
|
||||
安全的漏洞被发现的时候，并且它可能会被尽快的修复或者公开。请把这个安全
|
||||
漏洞报告给Linux内核安全团队。
|
||||
|
||||
1) 联系
|
||||
|
||||
linux内核安全团队可以通过email<security@kernel.org>来联系。这是
|
||||
一组独立的安全工作人员，可以帮助改善漏洞报告并且公布和取消一个修复。安
|
||||
全团队有可能会从部分的维护者那里引进额外的帮助来了解并且修复安全漏洞。
|
||||
当遇到任何漏洞，所能提供的信息越多就越能诊断和修复。如果你不清楚什么
|
||||
是有帮助的信息，那就请重温一下admin-guide/reporting-bugs.rst文件中的概述过程。任
|
||||
何攻击性的代码都是非常有用的，未经报告者的同意不会被取消，除非它已经
|
||||
被公布于众。
|
||||
|
||||
2) 公开
|
||||
|
||||
Linux内核安全团队的宗旨就是和漏洞提交者一起处理漏洞的解决方案直
|
||||
到公开。我们喜欢尽快地完全公开漏洞。当一个漏洞或者修复还没有被完全地理
|
||||
解，解决方案没有通过测试或者供应商协调，可以合理地延迟公开。然而，我们
|
||||
期望这些延迟尽可能的短些，是可数的几天，而不是几个星期或者几个月。公开
|
||||
日期是通过安全团队和漏洞提供者以及供应商洽谈后的结果。公开时间表是从很
|
||||
短（特殊的，它已经被公众所知道）到几个星期。作为一个基本的默认政策，我
|
||||
们所期望通知公众的日期是7天的安排。
|
||||
|
||||
3) 保密协议
|
||||
|
||||
Linux内核安全团队不是一个正式的团体，因此不能加入任何的保密协议。
|
||||
|
|
@ -140,7 +140,7 @@ is an arbitrary string allowed in a filesystem, e.g.::
|
|||
Each function provides its specific set of attributes, with either read-only
|
||||
or read-write access. Where applicable they need to be written to as
|
||||
appropriate.
|
||||
Please refer to Documentation/ABI/*/configfs-usb-gadget* for more information.
|
||||
Please refer to Documentation/ABI/testing/configfs-usb-gadget for more information.
|
||||
|
||||
4. Associating the functions with their configurations
|
||||
------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
================
|
||||
================
|
||||
mtouchusb driver
|
||||
================
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
==========
|
||||
==========
|
||||
USB serial
|
||||
==========
|
||||
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@ to SEV::
|
|||
[ecx]:
|
||||
Bits[31:0] Number of encrypted guests supported simultaneously
|
||||
|
||||
If support for SEV is present, MSR 0xc001_0010 (MSR_K8_SYSCFG) and MSR 0xc001_0015
|
||||
If support for SEV is present, MSR 0xc001_0010 (MSR_AMD64_SYSCFG) and MSR 0xc001_0015
|
||||
(MSR_K7_HWCR) can be used to determine if it can be enabled::
|
||||
|
||||
0xc001_0010:
|
||||
|
|
|
|||
|
|
@ -4803,7 +4803,7 @@ KVM_PV_VM_VERIFY
|
|||
4.126 KVM_X86_SET_MSR_FILTER
|
||||
----------------------------
|
||||
|
||||
:Capability: KVM_X86_SET_MSR_FILTER
|
||||
:Capability: KVM_CAP_X86_MSR_FILTER
|
||||
:Architectures: x86
|
||||
:Type: vm ioctl
|
||||
:Parameters: struct kvm_msr_filter
|
||||
|
|
@ -6715,7 +6715,7 @@ accesses that would usually trigger a #GP by KVM into the guest will
|
|||
instead get bounced to user space through the KVM_EXIT_X86_RDMSR and
|
||||
KVM_EXIT_X86_WRMSR exit notifications.
|
||||
|
||||
8.27 KVM_X86_SET_MSR_FILTER
|
||||
8.27 KVM_CAP_X86_MSR_FILTER
|
||||
---------------------------
|
||||
|
||||
:Architectures: x86
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ CPUID function 0x8000001f reports information related to SME::
|
|||
system physical addresses, not guest physical
|
||||
addresses)
|
||||
|
||||
If support for SME is present, MSR 0xc00100010 (MSR_K8_SYSCFG) can be used to
|
||||
If support for SME is present, MSR 0xc00100010 (MSR_AMD64_SYSCFG) can be used to
|
||||
determine if SME is enabled and/or to enable memory encryption::
|
||||
|
||||
0xc0010010:
|
||||
|
|
@ -79,7 +79,7 @@ The state of SME in the Linux kernel can be documented as follows:
|
|||
The CPU supports SME (determined through CPUID instruction).
|
||||
|
||||
- Enabled:
|
||||
Supported and bit 23 of MSR_K8_SYSCFG is set.
|
||||
Supported and bit 23 of MSR_AMD64_SYSCFG is set.
|
||||
|
||||
- Active:
|
||||
Supported, Enabled and the Linux kernel is actively applying
|
||||
|
|
@ -89,7 +89,7 @@ The state of SME in the Linux kernel can be documented as follows:
|
|||
SME can also be enabled and activated in the BIOS. If SME is enabled and
|
||||
activated in the BIOS, then all memory accesses will be encrypted and it will
|
||||
not be necessary to activate the Linux memory encryption support. If the BIOS
|
||||
merely enables SME (sets bit 23 of the MSR_K8_SYSCFG), then Linux can activate
|
||||
merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG), then Linux can activate
|
||||
memory encryption by default (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) or
|
||||
by supplying mem_encrypt=on on the kernel command line. However, if BIOS does
|
||||
not enable SME, then Linux will not be able to activate memory encryption, even
|
||||
|
|
|
|||
36
MAINTAINERS
36
MAINTAINERS
|
|
@ -1595,7 +1595,7 @@ F: drivers/clk/sunxi/
|
|||
ARM/Allwinner sunXi SoC support
|
||||
M: Maxime Ripard <mripard@kernel.org>
|
||||
M: Chen-Yu Tsai <wens@csie.org>
|
||||
R: Jernej Skrabec <jernej.skrabec@siol.net>
|
||||
R: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
|
||||
|
|
@ -1635,8 +1635,8 @@ F: Documentation/devicetree/bindings/sound/amlogic*
|
|||
F: sound/soc/meson/
|
||||
|
||||
ARM/Amlogic Meson SoC support
|
||||
M: Neil Armstrong <narmstrong@baylibre.com>
|
||||
M: Kevin Hilman <khilman@baylibre.com>
|
||||
R: Neil Armstrong <narmstrong@baylibre.com>
|
||||
R: Jerome Brunet <jbrunet@baylibre.com>
|
||||
R: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
|
|
@ -5106,7 +5106,7 @@ S: Maintained
|
|||
F: drivers/net/fddi/defza.*
|
||||
|
||||
DEINTERLACE DRIVERS FOR ALLWINNER H3
|
||||
M: Jernej Skrabec <jernej.skrabec@siol.net>
|
||||
M: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||
L: linux-media@vger.kernel.org
|
||||
S: Maintained
|
||||
T: git git://linuxtv.org/media_tree.git
|
||||
|
|
@ -5254,7 +5254,7 @@ DEVICE DIRECT ACCESS (DAX)
|
|||
M: Dan Williams <dan.j.williams@intel.com>
|
||||
M: Vishal Verma <vishal.l.verma@intel.com>
|
||||
M: Dave Jiang <dave.jiang@intel.com>
|
||||
L: linux-nvdimm@lists.01.org
|
||||
L: nvdimm@lists.linux.dev
|
||||
S: Supported
|
||||
F: drivers/dax/
|
||||
|
||||
|
|
@ -5649,14 +5649,14 @@ F: include/linux/power/smartreflex.h
|
|||
DRM DRIVER FOR ALLWINNER DE2 AND DE3 ENGINE
|
||||
M: Maxime Ripard <mripard@kernel.org>
|
||||
M: Chen-Yu Tsai <wens@csie.org>
|
||||
R: Jernej Skrabec <jernej.skrabec@siol.net>
|
||||
R: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||
L: dri-devel@lists.freedesktop.org
|
||||
S: Supported
|
||||
T: git git://anongit.freedesktop.org/drm/drm-misc
|
||||
F: drivers/gpu/drm/sun4i/sun8i*
|
||||
|
||||
DRM DRIVER FOR ARM PL111 CLCD
|
||||
M: Eric Anholt <eric@anholt.net>
|
||||
M: Emma Anholt <emma@anholt.net>
|
||||
S: Supported
|
||||
T: git git://anongit.freedesktop.org/drm/drm-misc
|
||||
F: drivers/gpu/drm/pl111/
|
||||
|
|
@ -5736,7 +5736,7 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
|
|||
F: drivers/gpu/drm/tiny/gm12u320.c
|
||||
|
||||
DRM DRIVER FOR HX8357D PANELS
|
||||
M: Eric Anholt <eric@anholt.net>
|
||||
M: Emma Anholt <emma@anholt.net>
|
||||
S: Maintained
|
||||
T: git git://anongit.freedesktop.org/drm/drm-misc
|
||||
F: Documentation/devicetree/bindings/display/himax,hx8357d.txt
|
||||
|
|
@ -6040,7 +6040,7 @@ M: Neil Armstrong <narmstrong@baylibre.com>
|
|||
M: Robert Foss <robert.foss@linaro.org>
|
||||
R: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
|
||||
R: Jonas Karlman <jonas@kwiboo.se>
|
||||
R: Jernej Skrabec <jernej.skrabec@siol.net>
|
||||
R: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||
S: Maintained
|
||||
T: git git://anongit.freedesktop.org/drm/drm-misc
|
||||
F: drivers/gpu/drm/bridge/
|
||||
|
|
@ -6194,7 +6194,7 @@ F: Documentation/devicetree/bindings/display/ti/
|
|||
F: drivers/gpu/drm/omapdrm/
|
||||
|
||||
DRM DRIVERS FOR V3D
|
||||
M: Eric Anholt <eric@anholt.net>
|
||||
M: Emma Anholt <emma@anholt.net>
|
||||
S: Supported
|
||||
T: git git://anongit.freedesktop.org/drm/drm-misc
|
||||
F: Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
|
||||
|
|
@ -6202,7 +6202,7 @@ F: drivers/gpu/drm/v3d/
|
|||
F: include/uapi/drm/v3d_drm.h
|
||||
|
||||
DRM DRIVERS FOR VC4
|
||||
M: Eric Anholt <eric@anholt.net>
|
||||
M: Emma Anholt <emma@anholt.net>
|
||||
M: Maxime Ripard <mripard@kernel.org>
|
||||
S: Supported
|
||||
T: git git://github.com/anholt/linux
|
||||
|
|
@ -7023,7 +7023,7 @@ M: Dan Williams <dan.j.williams@intel.com>
|
|||
R: Matthew Wilcox <willy@infradead.org>
|
||||
R: Jan Kara <jack@suse.cz>
|
||||
L: linux-fsdevel@vger.kernel.org
|
||||
L: linux-nvdimm@lists.01.org
|
||||
L: nvdimm@lists.linux.dev
|
||||
S: Supported
|
||||
F: fs/dax.c
|
||||
F: include/linux/dax.h
|
||||
|
|
@ -10395,7 +10395,7 @@ LIBNVDIMM BLK: MMIO-APERTURE DRIVER
|
|||
M: Dan Williams <dan.j.williams@intel.com>
|
||||
M: Vishal Verma <vishal.l.verma@intel.com>
|
||||
M: Dave Jiang <dave.jiang@intel.com>
|
||||
L: linux-nvdimm@lists.01.org
|
||||
L: nvdimm@lists.linux.dev
|
||||
S: Supported
|
||||
Q: https://patchwork.kernel.org/project/linux-nvdimm/list/
|
||||
P: Documentation/nvdimm/maintainer-entry-profile.rst
|
||||
|
|
@ -10406,7 +10406,7 @@ LIBNVDIMM BTT: BLOCK TRANSLATION TABLE
|
|||
M: Vishal Verma <vishal.l.verma@intel.com>
|
||||
M: Dan Williams <dan.j.williams@intel.com>
|
||||
M: Dave Jiang <dave.jiang@intel.com>
|
||||
L: linux-nvdimm@lists.01.org
|
||||
L: nvdimm@lists.linux.dev
|
||||
S: Supported
|
||||
Q: https://patchwork.kernel.org/project/linux-nvdimm/list/
|
||||
P: Documentation/nvdimm/maintainer-entry-profile.rst
|
||||
|
|
@ -10416,7 +10416,7 @@ LIBNVDIMM PMEM: PERSISTENT MEMORY DRIVER
|
|||
M: Dan Williams <dan.j.williams@intel.com>
|
||||
M: Vishal Verma <vishal.l.verma@intel.com>
|
||||
M: Dave Jiang <dave.jiang@intel.com>
|
||||
L: linux-nvdimm@lists.01.org
|
||||
L: nvdimm@lists.linux.dev
|
||||
S: Supported
|
||||
Q: https://patchwork.kernel.org/project/linux-nvdimm/list/
|
||||
P: Documentation/nvdimm/maintainer-entry-profile.rst
|
||||
|
|
@ -10424,7 +10424,7 @@ F: drivers/nvdimm/pmem*
|
|||
|
||||
LIBNVDIMM: DEVICETREE BINDINGS
|
||||
M: Oliver O'Halloran <oohall@gmail.com>
|
||||
L: linux-nvdimm@lists.01.org
|
||||
L: nvdimm@lists.linux.dev
|
||||
S: Supported
|
||||
Q: https://patchwork.kernel.org/project/linux-nvdimm/list/
|
||||
F: Documentation/devicetree/bindings/pmem/pmem-region.txt
|
||||
|
|
@ -10435,7 +10435,7 @@ M: Dan Williams <dan.j.williams@intel.com>
|
|||
M: Vishal Verma <vishal.l.verma@intel.com>
|
||||
M: Dave Jiang <dave.jiang@intel.com>
|
||||
M: Ira Weiny <ira.weiny@intel.com>
|
||||
L: linux-nvdimm@lists.01.org
|
||||
L: nvdimm@lists.linux.dev
|
||||
S: Supported
|
||||
Q: https://patchwork.kernel.org/project/linux-nvdimm/list/
|
||||
P: Documentation/nvdimm/maintainer-entry-profile.rst
|
||||
|
|
@ -12197,6 +12197,7 @@ F: drivers/platform/surface/surfacepro3_button.c
|
|||
|
||||
MICROSOFT SURFACE SYSTEM AGGREGATOR SUBSYSTEM
|
||||
M: Maximilian Luz <luzmaximilian@gmail.com>
|
||||
L: platform-driver-x86@vger.kernel.org
|
||||
S: Maintained
|
||||
W: https://github.com/linux-surface/surface-aggregator-module
|
||||
C: irc://chat.freenode.net/##linux-surface
|
||||
|
|
@ -14751,7 +14752,6 @@ W: https://wireless.wiki.kernel.org/en/users/Drivers/p54
|
|||
F: drivers/net/wireless/intersil/prism54/
|
||||
|
||||
PROC FILESYSTEM
|
||||
R: Alexey Dobriyan <adobriyan@gmail.com>
|
||||
L: linux-kernel@vger.kernel.org
|
||||
L: linux-fsdevel@vger.kernel.org
|
||||
S: Maintained
|
||||
|
|
@ -15832,7 +15832,7 @@ F: include/uapi/linux/rose.h
|
|||
F: net/rose/
|
||||
|
||||
ROTATION DRIVER FOR ALLWINNER A83T
|
||||
M: Jernej Skrabec <jernej.skrabec@siol.net>
|
||||
M: Jernej Skrabec <jernej.skrabec@gmail.com>
|
||||
L: linux-media@vger.kernel.org
|
||||
S: Maintained
|
||||
T: git git://linuxtv.org/media_tree.git
|
||||
|
|
|
|||
2
Makefile
2
Makefile
|
|
@ -2,7 +2,7 @@
|
|||
VERSION = 5
|
||||
PATCHLEVEL = 13
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION = -rc1
|
||||
EXTRAVERSION = -rc3
|
||||
NAME = Frozen Wasteland
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
|
|
|||
|
|
@ -482,7 +482,7 @@
|
|||
550 common process_madvise sys_process_madvise
|
||||
551 common epoll_pwait2 sys_epoll_pwait2
|
||||
552 common mount_setattr sys_mount_setattr
|
||||
553 common quotactl_path sys_quotactl_path
|
||||
# 553 reserved for quotactl_path
|
||||
554 common landlock_create_ruleset sys_landlock_create_ruleset
|
||||
555 common landlock_add_rule sys_landlock_add_rule
|
||||
556 common landlock_restrict_self sys_landlock_restrict_self
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ endif
|
|||
|
||||
|
||||
ifdef CONFIG_ARC_CURR_IN_REG
|
||||
# For a global register defintion, make sure it gets passed to every file
|
||||
# For a global register definition, make sure it gets passed to every file
|
||||
# We had a customer reported bug where some code built in kernel was NOT using
|
||||
# any kernel headers, and missing the r25 global register
|
||||
# Can't do unconditionally because of recursive include issues
|
||||
|
|
|
|||
|
|
@ -116,7 +116,7 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
|
|||
*
|
||||
* Technically the lock is also needed for UP (boils down to irq save/restore)
|
||||
* but we can cheat a bit since cmpxchg() atomic_ops_lock() would cause irqs to
|
||||
* be disabled thus can't possibly be interrpted/preempted/clobbered by xchg()
|
||||
* be disabled thus can't possibly be interrupted/preempted/clobbered by xchg()
|
||||
* Other way around, xchg is one instruction anyways, so can't be interrupted
|
||||
* as such
|
||||
*/
|
||||
|
|
@ -143,7 +143,7 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
|
|||
/*
|
||||
* "atomic" variant of xchg()
|
||||
* REQ: It needs to follow the same serialization rules as other atomic_xxx()
|
||||
* Since xchg() doesn't always do that, it would seem that following defintion
|
||||
* Since xchg() doesn't always do that, it would seem that following definition
|
||||
* is incorrect. But here's the rationale:
|
||||
* SMP : Even xchg() takes the atomic_ops_lock, so OK.
|
||||
* LLSC: atomic_ops_lock are not relevant at all (even if SMP, since LLSC
|
||||
|
|
|
|||
|
|
@ -7,6 +7,18 @@
|
|||
|
||||
#include <uapi/asm/page.h>
|
||||
|
||||
#ifdef CONFIG_ARC_HAS_PAE40
|
||||
|
||||
#define MAX_POSSIBLE_PHYSMEM_BITS 40
|
||||
#define PAGE_MASK_PHYS (0xff00000000ull | PAGE_MASK)
|
||||
|
||||
#else /* CONFIG_ARC_HAS_PAE40 */
|
||||
|
||||
#define MAX_POSSIBLE_PHYSMEM_BITS 32
|
||||
#define PAGE_MASK_PHYS PAGE_MASK
|
||||
|
||||
#endif /* CONFIG_ARC_HAS_PAE40 */
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#define clear_page(paddr) memset((paddr), 0, PAGE_SIZE)
|
||||
|
|
|
|||
|
|
@ -107,8 +107,8 @@
|
|||
#define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
|
||||
|
||||
/* Set of bits not changed in pte_modify */
|
||||
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
|
||||
|
||||
#define _PAGE_CHG_MASK (PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
|
||||
_PAGE_SPECIAL)
|
||||
/* More Abbrevaited helpers */
|
||||
#define PAGE_U_NONE __pgprot(___DEF)
|
||||
#define PAGE_U_R __pgprot(___DEF | _PAGE_READ)
|
||||
|
|
@ -132,13 +132,7 @@
|
|||
#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
|
||||
#define PTE_BITS_RWX (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
|
||||
|
||||
#ifdef CONFIG_ARC_HAS_PAE40
|
||||
#define PTE_BITS_NON_RWX_IN_PD1 (0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
|
||||
#define MAX_POSSIBLE_PHYSMEM_BITS 40
|
||||
#else
|
||||
#define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE)
|
||||
#define MAX_POSSIBLE_PHYSMEM_BITS 32
|
||||
#endif
|
||||
#define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK_PHYS | _PAGE_CACHEABLE)
|
||||
|
||||
/**************************************************************************
|
||||
* Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
|
||||
|
|
|
|||
|
|
@ -33,5 +33,4 @@
|
|||
|
||||
#define PAGE_MASK (~(PAGE_SIZE-1))
|
||||
|
||||
|
||||
#endif /* _UAPI__ASM_ARC_PAGE_H */
|
||||
|
|
|
|||
|
|
@ -177,7 +177,7 @@ tracesys:
|
|||
|
||||
; Do the Sys Call as we normally would.
|
||||
; Validate the Sys Call number
|
||||
cmp r8, NR_syscalls
|
||||
cmp r8, NR_syscalls - 1
|
||||
mov.hi r0, -ENOSYS
|
||||
bhi tracesys_exit
|
||||
|
||||
|
|
@ -255,7 +255,7 @@ ENTRY(EV_Trap)
|
|||
;============ Normal syscall case
|
||||
|
||||
; syscall num shd not exceed the total system calls avail
|
||||
cmp r8, NR_syscalls
|
||||
cmp r8, NR_syscalls - 1
|
||||
mov.hi r0, -ENOSYS
|
||||
bhi .Lret_from_system_call
|
||||
|
||||
|
|
|
|||
|
|
@ -140,6 +140,7 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
|
|||
ptr = &remcomInBuffer[1];
|
||||
if (kgdb_hex2long(&ptr, &addr))
|
||||
regs->ret = addr;
|
||||
fallthrough;
|
||||
|
||||
case 'D':
|
||||
case 'k':
|
||||
|
|
|
|||
|
|
@ -50,14 +50,14 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
|
|||
int ret;
|
||||
|
||||
/*
|
||||
* This is only for old cores lacking LLOCK/SCOND, which by defintion
|
||||
* This is only for old cores lacking LLOCK/SCOND, which by definition
|
||||
* can't possibly be SMP. Thus doesn't need to be SMP safe.
|
||||
* And this also helps reduce the overhead for serializing in
|
||||
* the UP case
|
||||
*/
|
||||
WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
|
||||
|
||||
/* Z indicates to userspace if operation succeded */
|
||||
/* Z indicates to userspace if operation succeeded */
|
||||
regs->status32 &= ~STATUS_Z_MASK;
|
||||
|
||||
ret = access_ok(uaddr, sizeof(*uaddr));
|
||||
|
|
@ -107,7 +107,7 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
|
|||
|
||||
void arch_cpu_idle(void)
|
||||
{
|
||||
/* Re-enable interrupts <= default irq priority before commiting SLEEP */
|
||||
/* Re-enable interrupts <= default irq priority before committing SLEEP */
|
||||
const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO;
|
||||
|
||||
__asm__ __volatile__(
|
||||
|
|
@ -120,7 +120,7 @@ void arch_cpu_idle(void)
|
|||
|
||||
void arch_cpu_idle(void)
|
||||
{
|
||||
/* sleep, but enable both set E1/E2 (levels of interrutps) before committing */
|
||||
/* sleep, but enable both set E1/E2 (levels of interrupts) before committing */
|
||||
__asm__ __volatile__("sleep 0x3 \n");
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -259,7 +259,7 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
|
|||
regs->r2 = (unsigned long)&sf->uc;
|
||||
|
||||
/*
|
||||
* small optim to avoid unconditonally calling do_sigaltstack
|
||||
* small optim to avoid unconditionally calling do_sigaltstack
|
||||
* in sigreturn path, now that we only have rt_sigreturn
|
||||
*/
|
||||
magic = MAGIC_SIGALTSTK;
|
||||
|
|
@ -391,7 +391,7 @@ void do_signal(struct pt_regs *regs)
|
|||
void do_notify_resume(struct pt_regs *regs)
|
||||
{
|
||||
/*
|
||||
* ASM glue gaurantees that this is only called when returning to
|
||||
* ASM glue guarantees that this is only called when returning to
|
||||
* user mode
|
||||
*/
|
||||
if (test_thread_flag(TIF_NOTIFY_RESUME))
|
||||
|
|
|
|||
|
|
@ -157,7 +157,16 @@ void __init setup_arch_memory(void)
|
|||
min_high_pfn = PFN_DOWN(high_mem_start);
|
||||
max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
|
||||
|
||||
max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
|
||||
/*
|
||||
* max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
|
||||
* For HIGHMEM without PAE max_high_pfn should be less than
|
||||
* min_low_pfn to guarantee that these two regions don't overlap.
|
||||
* For PAE case highmem is greater than lowmem, so it is natural
|
||||
* to use max_high_pfn.
|
||||
*
|
||||
* In both cases, holes should be handled by pfn_valid().
|
||||
*/
|
||||
max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
|
||||
|
||||
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
|
||||
|
||||
|
|
|
|||
|
|
@ -53,9 +53,10 @@ EXPORT_SYMBOL(ioremap);
|
|||
void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
|
||||
unsigned long flags)
|
||||
{
|
||||
unsigned int off;
|
||||
unsigned long vaddr;
|
||||
struct vm_struct *area;
|
||||
phys_addr_t off, end;
|
||||
phys_addr_t end;
|
||||
pgprot_t prot = __pgprot(flags);
|
||||
|
||||
/* Don't allow wraparound, zero size */
|
||||
|
|
@ -72,7 +73,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
|
|||
|
||||
/* Mappings have to be page-aligned */
|
||||
off = paddr & ~PAGE_MASK;
|
||||
paddr &= PAGE_MASK;
|
||||
paddr &= PAGE_MASK_PHYS;
|
||||
size = PAGE_ALIGN(end + 1) - paddr;
|
||||
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -576,7 +576,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
|
|||
pte_t *ptep)
|
||||
{
|
||||
unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
|
||||
phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
|
||||
phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
|
||||
struct page *page = pfn_to_page(pte_pfn(*ptep));
|
||||
|
||||
create_tlb(vma, vaddr, ptep);
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@ config ARCH_WPCM450
|
|||
bool "Support for WPCM450 BMC (Hermon)"
|
||||
depends on ARCH_MULTI_V5
|
||||
select CPU_ARM926T
|
||||
select WPCM450_AIC
|
||||
select NPCM7XX_TIMER
|
||||
help
|
||||
General support for WPCM450 BMC (Hermon).
|
||||
|
|
|
|||
|
|
@ -121,8 +121,13 @@ static int cplds_probe(struct platform_device *pdev)
|
|||
return fpga->irq;
|
||||
|
||||
base_irq = platform_get_irq(pdev, 1);
|
||||
if (base_irq < 0)
|
||||
if (base_irq < 0) {
|
||||
base_irq = 0;
|
||||
} else {
|
||||
ret = devm_irq_alloc_descs(&pdev->dev, base_irq, base_irq, CPLDS_NB_IRQ, 0);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
fpga->base = devm_ioremap_resource(&pdev->dev, res);
|
||||
|
|
|
|||
|
|
@ -456,7 +456,7 @@
|
|||
440 common process_madvise sys_process_madvise
|
||||
441 common epoll_pwait2 sys_epoll_pwait2
|
||||
442 common mount_setattr sys_mount_setattr
|
||||
443 common quotactl_path sys_quotactl_path
|
||||
# 443 reserved for quotactl_path
|
||||
444 common landlock_create_ruleset sys_landlock_create_ruleset
|
||||
445 common landlock_add_rule sys_landlock_add_rule
|
||||
446 common landlock_restrict_self sys_landlock_restrict_self
|
||||
|
|
|
|||
|
|
@ -135,24 +135,18 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order)
|
|||
return;
|
||||
}
|
||||
|
||||
int xen_swiotlb_detect(void)
|
||||
{
|
||||
if (!xen_domain())
|
||||
return 0;
|
||||
if (xen_feature(XENFEAT_direct_mapped))
|
||||
return 1;
|
||||
/* legacy case */
|
||||
if (!xen_feature(XENFEAT_not_direct_mapped) && xen_initial_domain())
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __init xen_mm_init(void)
|
||||
{
|
||||
struct gnttab_cache_flush cflush;
|
||||
int rc;
|
||||
|
||||
if (!xen_swiotlb_detect())
|
||||
return 0;
|
||||
xen_swiotlb_init();
|
||||
|
||||
rc = xen_swiotlb_init();
|
||||
/* we can work with the default swiotlb */
|
||||
if (rc < 0 && rc != -EEXIST)
|
||||
return rc;
|
||||
|
||||
cflush.op = 0;
|
||||
cflush.a.dev_bus_addr = 0;
|
||||
|
|
|
|||
|
|
@ -175,6 +175,9 @@ vdso_install:
|
|||
$(if $(CONFIG_COMPAT_VDSO), \
|
||||
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
|
||||
|
||||
archprepare:
|
||||
$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
|
||||
|
||||
# We use MRPROPER_FILES and CLEAN_FILES now
|
||||
archclean:
|
||||
$(Q)$(MAKE) $(clean)=$(boot)
|
||||
|
|
|
|||
|
|
@ -14,7 +14,6 @@ &csi20 {
|
|||
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
csi20_in: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2>;
|
||||
|
|
@ -29,7 +28,6 @@ &csi40 {
|
|||
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
csi40_in: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2>;
|
||||
|
|
|
|||
|
|
@ -2573,6 +2573,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -2628,6 +2632,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -2419,6 +2419,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -2474,6 +2478,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -33,7 +33,7 @@ &csi40 {
|
|||
status = "okay";
|
||||
|
||||
ports {
|
||||
port {
|
||||
port@0 {
|
||||
csi40_in: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2>;
|
||||
|
|
|
|||
|
|
@ -1823,6 +1823,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -2709,6 +2709,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -2764,6 +2768,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -192,6 +192,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -3097,6 +3097,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -3152,6 +3156,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -3191,6 +3199,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -2761,6 +2761,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -2816,6 +2820,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -2499,6 +2499,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -2554,6 +2558,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -2575,6 +2575,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -2630,6 +2634,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -1106,6 +1106,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -1439,6 +1439,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -1478,6 +1482,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -298,8 +298,6 @@ &csi40 {
|
|||
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
csi40_in: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2>;
|
||||
|
|
|
|||
|
|
@ -1970,6 +1970,10 @@ ports {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -349,7 +349,6 @@ &csi20 {
|
|||
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
csi20_in: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1>;
|
||||
|
|
@ -364,8 +363,6 @@ &csi40 {
|
|||
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
csi40_in: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
|
|
|
|||
|
|
@ -5,3 +5,5 @@ generic-y += qrwlock.h
|
|||
generic-y += qspinlock.h
|
||||
generic-y += set_memory.h
|
||||
generic-y += user.h
|
||||
|
||||
generated-y += cpucaps.h
|
||||
|
|
|
|||
|
|
@ -1,74 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
/*
|
||||
* arch/arm64/include/asm/cpucaps.h
|
||||
*
|
||||
* Copyright (C) 2016 ARM Ltd.
|
||||
*/
|
||||
#ifndef __ASM_CPUCAPS_H
|
||||
#define __ASM_CPUCAPS_H
|
||||
|
||||
#define ARM64_WORKAROUND_CLEAN_CACHE 0
|
||||
#define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1
|
||||
#define ARM64_WORKAROUND_845719 2
|
||||
#define ARM64_HAS_SYSREG_GIC_CPUIF 3
|
||||
#define ARM64_HAS_PAN 4
|
||||
#define ARM64_HAS_LSE_ATOMICS 5
|
||||
#define ARM64_WORKAROUND_CAVIUM_23154 6
|
||||
#define ARM64_WORKAROUND_834220 7
|
||||
#define ARM64_HAS_NO_HW_PREFETCH 8
|
||||
#define ARM64_HAS_VIRT_HOST_EXTN 11
|
||||
#define ARM64_WORKAROUND_CAVIUM_27456 12
|
||||
#define ARM64_HAS_32BIT_EL0 13
|
||||
#define ARM64_SPECTRE_V3A 14
|
||||
#define ARM64_HAS_CNP 15
|
||||
#define ARM64_HAS_NO_FPSIMD 16
|
||||
#define ARM64_WORKAROUND_REPEAT_TLBI 17
|
||||
#define ARM64_WORKAROUND_QCOM_FALKOR_E1003 18
|
||||
#define ARM64_WORKAROUND_858921 19
|
||||
#define ARM64_WORKAROUND_CAVIUM_30115 20
|
||||
#define ARM64_HAS_DCPOP 21
|
||||
#define ARM64_SVE 22
|
||||
#define ARM64_UNMAP_KERNEL_AT_EL0 23
|
||||
#define ARM64_SPECTRE_V2 24
|
||||
#define ARM64_HAS_RAS_EXTN 25
|
||||
#define ARM64_WORKAROUND_843419 26
|
||||
#define ARM64_HAS_CACHE_IDC 27
|
||||
#define ARM64_HAS_CACHE_DIC 28
|
||||
#define ARM64_HW_DBM 29
|
||||
#define ARM64_SPECTRE_V4 30
|
||||
#define ARM64_MISMATCHED_CACHE_TYPE 31
|
||||
#define ARM64_HAS_STAGE2_FWB 32
|
||||
#define ARM64_HAS_CRC32 33
|
||||
#define ARM64_SSBS 34
|
||||
#define ARM64_WORKAROUND_1418040 35
|
||||
#define ARM64_HAS_SB 36
|
||||
#define ARM64_WORKAROUND_SPECULATIVE_AT 37
|
||||
#define ARM64_HAS_ADDRESS_AUTH_ARCH 38
|
||||
#define ARM64_HAS_ADDRESS_AUTH_IMP_DEF 39
|
||||
#define ARM64_HAS_GENERIC_AUTH_ARCH 40
|
||||
#define ARM64_HAS_GENERIC_AUTH_IMP_DEF 41
|
||||
#define ARM64_HAS_IRQ_PRIO_MASKING 42
|
||||
#define ARM64_HAS_DCPODP 43
|
||||
#define ARM64_WORKAROUND_1463225 44
|
||||
#define ARM64_WORKAROUND_CAVIUM_TX2_219_TVM 45
|
||||
#define ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM 46
|
||||
#define ARM64_WORKAROUND_1542419 47
|
||||
#define ARM64_HAS_E0PD 48
|
||||
#define ARM64_HAS_RNG 49
|
||||
#define ARM64_HAS_AMU_EXTN 50
|
||||
#define ARM64_HAS_ADDRESS_AUTH 51
|
||||
#define ARM64_HAS_GENERIC_AUTH 52
|
||||
#define ARM64_HAS_32BIT_EL1 53
|
||||
#define ARM64_BTI 54
|
||||
#define ARM64_HAS_ARMv8_4_TTL 55
|
||||
#define ARM64_HAS_TLB_RANGE 56
|
||||
#define ARM64_MTE 57
|
||||
#define ARM64_WORKAROUND_1508412 58
|
||||
#define ARM64_HAS_LDAPR 59
|
||||
#define ARM64_KVM_PROTECTED_MODE 60
|
||||
#define ARM64_WORKAROUND_NVIDIA_CARMEL_CNP 61
|
||||
#define ARM64_HAS_EPAN 62
|
||||
|
||||
#define ARM64_NCAPS 63
|
||||
|
||||
#endif /* __ASM_CPUCAPS_H */
|
||||
|
|
@ -893,8 +893,7 @@ __SYSCALL(__NR_process_madvise, sys_process_madvise)
|
|||
__SYSCALL(__NR_epoll_pwait2, compat_sys_epoll_pwait2)
|
||||
#define __NR_mount_setattr 442
|
||||
__SYSCALL(__NR_mount_setattr, sys_mount_setattr)
|
||||
#define __NR_quotactl_path 443
|
||||
__SYSCALL(__NR_quotactl_path, sys_quotactl_path)
|
||||
/* 443 is reserved for quotactl_path */
|
||||
#define __NR_landlock_create_ruleset 444
|
||||
__SYSCALL(__NR_landlock_create_ruleset, sys_landlock_create_ruleset)
|
||||
#define __NR_landlock_add_rule 445
|
||||
|
|
|
|||
|
|
@ -55,8 +55,10 @@ void __sync_icache_dcache(pte_t pte)
|
|||
{
|
||||
struct page *page = pte_page(pte);
|
||||
|
||||
if (!test_and_set_bit(PG_dcache_clean, &page->flags))
|
||||
if (!test_bit(PG_dcache_clean, &page->flags)) {
|
||||
sync_icache_aliases(page_address(page), page_size(page));
|
||||
set_bit(PG_dcache_clean, &page->flags);
|
||||
}
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(__sync_icache_dcache);
|
||||
|
||||
|
|
|
|||
|
|
@ -43,6 +43,7 @@
|
|||
#include <linux/sizes.h>
|
||||
#include <asm/tlb.h>
|
||||
#include <asm/alternative.h>
|
||||
#include <asm/xen/swiotlb-xen.h>
|
||||
|
||||
/*
|
||||
* We need to be able to catch inadvertent references to memstart_addr
|
||||
|
|
@ -482,7 +483,7 @@ void __init mem_init(void)
|
|||
if (swiotlb_force == SWIOTLB_FORCE ||
|
||||
max_pfn > PFN_DOWN(arm64_dma_phys_limit))
|
||||
swiotlb_init(1);
|
||||
else
|
||||
else if (!xen_swiotlb_detect())
|
||||
swiotlb_force = SWIOTLB_NO_FORCE;
|
||||
|
||||
set_max_mapnr(max_pfn - PHYS_PFN_OFFSET);
|
||||
|
|
|
|||
|
|
@ -447,6 +447,18 @@ SYM_FUNC_START(__cpu_setup)
|
|||
mov x10, #(SYS_GCR_EL1_RRND | SYS_GCR_EL1_EXCL_MASK)
|
||||
msr_s SYS_GCR_EL1, x10
|
||||
|
||||
/*
|
||||
* If GCR_EL1.RRND=1 is implemented the same way as RRND=0, then
|
||||
* RGSR_EL1.SEED must be non-zero for IRG to produce
|
||||
* pseudorandom numbers. As RGSR_EL1 is UNKNOWN out of reset, we
|
||||
* must initialize it.
|
||||
*/
|
||||
mrs x10, CNTVCT_EL0
|
||||
ands x10, x10, #SYS_RGSR_EL1_SEED_MASK
|
||||
csinc x10, x10, xzr, ne
|
||||
lsl x10, x10, #SYS_RGSR_EL1_SEED_SHIFT
|
||||
msr_s SYS_RGSR_EL1, x10
|
||||
|
||||
/* clear any pending tag check faults in TFSR*_EL1 */
|
||||
msr_s SYS_TFSR_EL1, xzr
|
||||
msr_s SYS_TFSRE0_EL1, xzr
|
||||
|
|
|
|||
|
|
@ -0,0 +1,22 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
gen := arch/$(ARCH)/include/generated
|
||||
kapi := $(gen)/asm
|
||||
|
||||
kapi-hdrs-y := $(kapi)/cpucaps.h
|
||||
|
||||
targets += $(addprefix ../../../,$(gen-y) $(kapi-hdrs-y))
|
||||
|
||||
PHONY += kapi
|
||||
|
||||
kapi: $(kapi-hdrs-y) $(gen-y)
|
||||
|
||||
# Create output directory if not already present
|
||||
_dummy := $(shell [ -d '$(kapi)' ] || mkdir -p '$(kapi)')
|
||||
|
||||
quiet_cmd_gen_cpucaps = GEN $@
|
||||
cmd_gen_cpucaps = mkdir -p $(dir $@) && \
|
||||
$(AWK) -f $(filter-out $(PHONY),$^) > $@
|
||||
|
||||
$(kapi)/cpucaps.h: $(src)/gen-cpucaps.awk $(src)/cpucaps FORCE
|
||||
$(call if_changed,gen_cpucaps)
|
||||
|
|
@ -0,0 +1,65 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
#
|
||||
# Internal CPU capabilities constants, keep this list sorted
|
||||
|
||||
BTI
|
||||
HAS_32BIT_EL0
|
||||
HAS_32BIT_EL1
|
||||
HAS_ADDRESS_AUTH
|
||||
HAS_ADDRESS_AUTH_ARCH
|
||||
HAS_ADDRESS_AUTH_IMP_DEF
|
||||
HAS_AMU_EXTN
|
||||
HAS_ARMv8_4_TTL
|
||||
HAS_CACHE_DIC
|
||||
HAS_CACHE_IDC
|
||||
HAS_CNP
|
||||
HAS_CRC32
|
||||
HAS_DCPODP
|
||||
HAS_DCPOP
|
||||
HAS_E0PD
|
||||
HAS_EPAN
|
||||
HAS_GENERIC_AUTH
|
||||
HAS_GENERIC_AUTH_ARCH
|
||||
HAS_GENERIC_AUTH_IMP_DEF
|
||||
HAS_IRQ_PRIO_MASKING
|
||||
HAS_LDAPR
|
||||
HAS_LSE_ATOMICS
|
||||
HAS_NO_FPSIMD
|
||||
HAS_NO_HW_PREFETCH
|
||||
HAS_PAN
|
||||
HAS_RAS_EXTN
|
||||
HAS_RNG
|
||||
HAS_SB
|
||||
HAS_STAGE2_FWB
|
||||
HAS_SYSREG_GIC_CPUIF
|
||||
HAS_TLB_RANGE
|
||||
HAS_VIRT_HOST_EXTN
|
||||
HW_DBM
|
||||
KVM_PROTECTED_MODE
|
||||
MISMATCHED_CACHE_TYPE
|
||||
MTE
|
||||
SPECTRE_V2
|
||||
SPECTRE_V3A
|
||||
SPECTRE_V4
|
||||
SSBS
|
||||
SVE
|
||||
UNMAP_KERNEL_AT_EL0
|
||||
WORKAROUND_834220
|
||||
WORKAROUND_843419
|
||||
WORKAROUND_845719
|
||||
WORKAROUND_858921
|
||||
WORKAROUND_1418040
|
||||
WORKAROUND_1463225
|
||||
WORKAROUND_1508412
|
||||
WORKAROUND_1542419
|
||||
WORKAROUND_CAVIUM_23154
|
||||
WORKAROUND_CAVIUM_27456
|
||||
WORKAROUND_CAVIUM_30115
|
||||
WORKAROUND_CAVIUM_TX2_219_PRFM
|
||||
WORKAROUND_CAVIUM_TX2_219_TVM
|
||||
WORKAROUND_CLEAN_CACHE
|
||||
WORKAROUND_DEVICE_LOAD_ACQUIRE
|
||||
WORKAROUND_NVIDIA_CARMEL_CNP
|
||||
WORKAROUND_QCOM_FALKOR_E1003
|
||||
WORKAROUND_REPEAT_TLBI
|
||||
WORKAROUND_SPECULATIVE_AT
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
#!/bin/awk -f
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
# gen-cpucaps.awk: arm64 cpucaps header generator
|
||||
#
|
||||
# Usage: awk -f gen-cpucaps.awk cpucaps.txt
|
||||
|
||||
# Log an error and terminate
|
||||
function fatal(msg) {
|
||||
print "Error at line " NR ": " msg > "/dev/stderr"
|
||||
exit 1
|
||||
}
|
||||
|
||||
# skip blank lines and comment lines
|
||||
/^$/ { next }
|
||||
/^#/ { next }
|
||||
|
||||
BEGIN {
|
||||
print "#ifndef __ASM_CPUCAPS_H"
|
||||
print "#define __ASM_CPUCAPS_H"
|
||||
print ""
|
||||
print "/* Generated file - do not edit */"
|
||||
cap_num = 0
|
||||
print ""
|
||||
}
|
||||
|
||||
/^[vA-Z0-9_]+$/ {
|
||||
printf("#define ARM64_%-30s\t%d\n", $0, cap_num++)
|
||||
next
|
||||
}
|
||||
|
||||
END {
|
||||
printf("#define ARM64_NCAPS\t\t\t\t%d\n", cap_num)
|
||||
print ""
|
||||
print "#endif /* __ASM_CPUCAPS_H */"
|
||||
}
|
||||
|
||||
# Any lines not handled by previous rules are unexpected
|
||||
{
|
||||
fatal("unhandled statement")
|
||||
}
|
||||
|
|
@ -363,7 +363,7 @@
|
|||
440 common process_madvise sys_process_madvise
|
||||
441 common epoll_pwait2 sys_epoll_pwait2
|
||||
442 common mount_setattr sys_mount_setattr
|
||||
443 common quotactl_path sys_quotactl_path
|
||||
# 443 reserved for quotactl_path
|
||||
444 common landlock_create_ruleset sys_landlock_create_ruleset
|
||||
445 common landlock_add_rule sys_landlock_add_rule
|
||||
446 common landlock_restrict_self sys_landlock_restrict_self
|
||||
|
|
|
|||
|
|
@ -623,7 +623,8 @@ static inline void siginfo_build_tests(void)
|
|||
BUILD_BUG_ON(offsetof(siginfo_t, si_pkey) != 0x12);
|
||||
|
||||
/* _sigfault._perf */
|
||||
BUILD_BUG_ON(offsetof(siginfo_t, si_perf) != 0x10);
|
||||
BUILD_BUG_ON(offsetof(siginfo_t, si_perf_data) != 0x10);
|
||||
BUILD_BUG_ON(offsetof(siginfo_t, si_perf_type) != 0x14);
|
||||
|
||||
/* _sigpoll */
|
||||
BUILD_BUG_ON(offsetof(siginfo_t, si_band) != 0x0c);
|
||||
|
|
|
|||
|
|
@ -442,7 +442,7 @@
|
|||
440 common process_madvise sys_process_madvise
|
||||
441 common epoll_pwait2 sys_epoll_pwait2
|
||||
442 common mount_setattr sys_mount_setattr
|
||||
443 common quotactl_path sys_quotactl_path
|
||||
# 443 reserved for quotactl_path
|
||||
444 common landlock_create_ruleset sys_landlock_create_ruleset
|
||||
445 common landlock_add_rule sys_landlock_add_rule
|
||||
446 common landlock_restrict_self sys_landlock_restrict_self
|
||||
|
|
|
|||
|
|
@ -448,7 +448,7 @@
|
|||
440 common process_madvise sys_process_madvise
|
||||
441 common epoll_pwait2 sys_epoll_pwait2
|
||||
442 common mount_setattr sys_mount_setattr
|
||||
443 common quotactl_path sys_quotactl_path
|
||||
# 443 reserved for quotactl_path
|
||||
444 common landlock_create_ruleset sys_landlock_create_ruleset
|
||||
445 common landlock_add_rule sys_landlock_add_rule
|
||||
446 common landlock_restrict_self sys_landlock_restrict_self
|
||||
|
|
|
|||
|
|
@ -381,7 +381,7 @@
|
|||
440 n32 process_madvise sys_process_madvise
|
||||
441 n32 epoll_pwait2 compat_sys_epoll_pwait2
|
||||
442 n32 mount_setattr sys_mount_setattr
|
||||
443 n32 quotactl_path sys_quotactl_path
|
||||
# 443 reserved for quotactl_path
|
||||
444 n32 landlock_create_ruleset sys_landlock_create_ruleset
|
||||
445 n32 landlock_add_rule sys_landlock_add_rule
|
||||
446 n32 landlock_restrict_self sys_landlock_restrict_self
|
||||
|
|
|
|||
|
|
@ -357,7 +357,7 @@
|
|||
440 n64 process_madvise sys_process_madvise
|
||||
441 n64 epoll_pwait2 sys_epoll_pwait2
|
||||
442 n64 mount_setattr sys_mount_setattr
|
||||
443 n64 quotactl_path sys_quotactl_path
|
||||
# 443 reserved for quotactl_path
|
||||
444 n64 landlock_create_ruleset sys_landlock_create_ruleset
|
||||
445 n64 landlock_add_rule sys_landlock_add_rule
|
||||
446 n64 landlock_restrict_self sys_landlock_restrict_self
|
||||
|
|
|
|||
|
|
@ -430,7 +430,7 @@
|
|||
440 o32 process_madvise sys_process_madvise
|
||||
441 o32 epoll_pwait2 sys_epoll_pwait2 compat_sys_epoll_pwait2
|
||||
442 o32 mount_setattr sys_mount_setattr
|
||||
443 o32 quotactl_path sys_quotactl_path
|
||||
# 443 reserved for quotactl_path
|
||||
444 o32 landlock_create_ruleset sys_landlock_create_ruleset
|
||||
445 o32 landlock_add_rule sys_landlock_add_rule
|
||||
446 o32 landlock_restrict_self sys_landlock_restrict_self
|
||||
|
|
|
|||
|
|
@ -0,0 +1,9 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
#ifndef __ASM_BARRIER_H
|
||||
#define __ASM_BARRIER_H
|
||||
|
||||
#define mb() asm volatile ("l.msync" ::: "memory")
|
||||
|
||||
#include <asm-generic/barrier.h>
|
||||
|
||||
#endif /* __ASM_BARRIER_H */
|
||||
|
|
@ -278,6 +278,8 @@ void calibrate_delay(void)
|
|||
pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
|
||||
loops_per_jiffy / (500000 / HZ),
|
||||
(loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
|
||||
|
||||
of_node_put(cpu);
|
||||
}
|
||||
|
||||
void __init setup_arch(char **cmdline_p)
|
||||
|
|
|
|||
|
|
@ -75,7 +75,6 @@ static void __init map_ram(void)
|
|||
/* These mark extents of read-only kernel pages...
|
||||
* ...from vmlinux.lds.S
|
||||
*/
|
||||
struct memblock_region *region;
|
||||
|
||||
v = PAGE_OFFSET;
|
||||
|
||||
|
|
@ -121,7 +120,7 @@ static void __init map_ram(void)
|
|||
}
|
||||
|
||||
printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
|
||||
region->base, region->base + region->size);
|
||||
start, end);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -129,7 +128,6 @@ void __init paging_init(void)
|
|||
{
|
||||
extern void tlb_init(void);
|
||||
|
||||
unsigned long end;
|
||||
int i;
|
||||
|
||||
printk(KERN_INFO "Setting up paging and PTEs.\n");
|
||||
|
|
@ -145,8 +143,6 @@ void __init paging_init(void)
|
|||
*/
|
||||
current_pgd[smp_processor_id()] = init_mm.pgd;
|
||||
|
||||
end = (unsigned long)__va(max_low_pfn * PAGE_SIZE);
|
||||
|
||||
map_ram();
|
||||
|
||||
zone_sizes_init();
|
||||
|
|
|
|||
|
|
@ -440,7 +440,7 @@
|
|||
440 common process_madvise sys_process_madvise
|
||||
441 common epoll_pwait2 sys_epoll_pwait2 compat_sys_epoll_pwait2
|
||||
442 common mount_setattr sys_mount_setattr
|
||||
443 common quotactl_path sys_quotactl_path
|
||||
# 443 reserved for quotactl_path
|
||||
444 common landlock_create_ruleset sys_landlock_create_ruleset
|
||||
445 common landlock_add_rule sys_landlock_add_rule
|
||||
446 common landlock_restrict_self sys_landlock_restrict_self
|
||||
|
|
|
|||
|
|
@ -448,6 +448,9 @@
|
|||
*/
|
||||
long plpar_hcall_norets(unsigned long opcode, ...);
|
||||
|
||||
/* Variant which does not do hcall tracing */
|
||||
long plpar_hcall_norets_notrace(unsigned long opcode, ...);
|
||||
|
||||
/**
|
||||
* plpar_hcall: - Make a pseries hypervisor call
|
||||
* @opcode: The hypervisor call to make.
|
||||
|
|
|
|||
|
|
@ -153,8 +153,6 @@ static inline void interrupt_enter_prepare(struct pt_regs *regs, struct interrup
|
|||
*/
|
||||
static inline void interrupt_exit_prepare(struct pt_regs *regs, struct interrupt_state *state)
|
||||
{
|
||||
if (user_mode(regs))
|
||||
kuep_unlock();
|
||||
}
|
||||
|
||||
static inline void interrupt_async_enter_prepare(struct pt_regs *regs, struct interrupt_state *state)
|
||||
|
|
@ -222,6 +220,13 @@ static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte
|
|||
local_paca->irq_soft_mask = IRQS_ALL_DISABLED;
|
||||
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
|
||||
|
||||
if (IS_ENABLED(CONFIG_PPC_BOOK3S_64) && !(regs->msr & MSR_PR) &&
|
||||
regs->nip < (unsigned long)__end_interrupts) {
|
||||
// Kernel code running below __end_interrupts is
|
||||
// implicitly soft-masked.
|
||||
regs->softe = IRQS_ALL_DISABLED;
|
||||
}
|
||||
|
||||
/* Don't do any per-CPU operations until interrupt state is fixed */
|
||||
|
||||
if (nmi_disables_ftrace(regs)) {
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue