mirror of https://gitee.com/openkylin/linux.git
regulator: tps51632: Add tps51632 regulator driver
The TPS51632 is a driverless step down controller with serial control. Advanced features such as D-Cap+ architecture with overlapping pulse support and OSR overshoot reduction provide fast transient response, lowest output capacitance and high efficiency. The TPS51632 supports both I2C and DVFS interfaces (through PWM) for dynamic control of the output voltage and current monitor telemetry. Add regulator driver for TPS51632. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
parent
ddffeb8c4d
commit
0c57067430
|
@ -335,6 +335,17 @@ config REGULATOR_PALMAS
|
|||
on the muxing. This is handled automatically in the driver by
|
||||
reading the mux info from OTP.
|
||||
|
||||
config REGULATOR_TPS51632
|
||||
tristate "TI TPS51632 Power Regulator"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports TPS51632 voltage regulator chip.
|
||||
The TPS52632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
|
||||
with Serial VID control and DVFS.
|
||||
The voltage output can be configure through I2C interface or PWM
|
||||
interface.
|
||||
|
||||
config REGULATOR_TPS6105X
|
||||
tristate "TI TPS6105X Power regulators"
|
||||
depends on TPS6105X
|
||||
|
|
|
@ -41,6 +41,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
|
||||
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
|
||||
|
|
|
@ -0,0 +1,332 @@
|
|||
/*
|
||||
* tps51632-regulator.c -- TI TPS51632
|
||||
*
|
||||
* Regulator driver for TPS51632 3-2-1 Phase D-Cap Step Down Driverless
|
||||
* Controller with serial VID control and DVFS.
|
||||
*
|
||||
* Copyright (c) 2012, NVIDIA Corporation.
|
||||
*
|
||||
* Author: Laxman Dewangan <ldewangan@nvidia.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation version 2.
|
||||
*
|
||||
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
|
||||
* whether express or implied; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
|
||||
* 02111-1307, USA
|
||||
*/
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/tps51632-regulator.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
/* Register definitions */
|
||||
#define TPS51632_VOLTAGE_SELECT_REG 0x0
|
||||
#define TPS51632_VOLTAGE_BASE_REG 0x1
|
||||
#define TPS51632_OFFSET_REG 0x2
|
||||
#define TPS51632_IMON_REG 0x3
|
||||
#define TPS51632_VMAX_REG 0x4
|
||||
#define TPS51632_DVFS_CONTROL_REG 0x5
|
||||
#define TPS51632_POWER_STATE_REG 0x6
|
||||
#define TPS51632_SLEW_REGS 0x7
|
||||
#define TPS51632_FAULT_REG 0x14
|
||||
|
||||
#define TPS51632_MAX_REG 0x15
|
||||
|
||||
#define TPS51632_VOUT_MASK 0x7F
|
||||
#define TPS51632_VOUT_OFFSET_MASK 0x1F
|
||||
#define TPS51632_VMAX_MASK 0x7F
|
||||
#define TPS51632_VMAX_LOCK 0x80
|
||||
|
||||
/* TPS51632_DVFS_CONTROL_REG */
|
||||
#define TPS51632_DVFS_PWMEN 0x1
|
||||
#define TPS51632_DVFS_STEP_20 0x2
|
||||
#define TPS51632_DVFS_VMAX_PG 0x4
|
||||
#define TPS51632_DVFS_PWMRST 0x8
|
||||
#define TPS51632_DVFS_OCA_EN 0x10
|
||||
#define TPS51632_DVFS_FCCM 0x20
|
||||
|
||||
/* TPS51632_POWER_STATE_REG */
|
||||
#define TPS51632_POWER_STATE_MASK 0x03
|
||||
#define TPS51632_POWER_STATE_MULTI_PHASE_CCM 0x0
|
||||
#define TPS51632_POWER_STATE_SINGLE_PHASE_CCM 0x1
|
||||
#define TPS51632_POWER_STATE_SINGLE_PHASE_DCM 0x2
|
||||
|
||||
#define TPS51632_MIN_VOLATGE 500000
|
||||
#define TPS51632_MAX_VOLATGE 1520000
|
||||
#define TPS51632_VOLATGE_STEP_10mV 10000
|
||||
#define TPS51632_VOLATGE_STEP_20mV 20000
|
||||
#define TPS51632_MAX_VSEL 0x7F
|
||||
#define TPS51632_MIN_VSEL 0x19
|
||||
#define TPS51632_DEFAULT_RAMP_DELAY 6000
|
||||
#define TPS51632_VOLT_VSEL(uV) \
|
||||
(DIV_ROUND_UP(uV - TPS51632_MIN_VOLATGE, \
|
||||
TPS51632_VOLATGE_STEP_10mV) + \
|
||||
TPS51632_MIN_VSEL)
|
||||
|
||||
/* TPS51632 chip information */
|
||||
struct tps51632_chip {
|
||||
struct device *dev;
|
||||
struct regulator_desc desc;
|
||||
struct regulator_dev *rdev;
|
||||
struct regmap *regmap;
|
||||
bool enable_pwm_dvfs;
|
||||
};
|
||||
|
||||
static int tps51632_dcdc_get_voltage_sel(struct regulator_dev *rdev)
|
||||
{
|
||||
struct tps51632_chip *tps = rdev_get_drvdata(rdev);
|
||||
unsigned int data;
|
||||
int ret;
|
||||
unsigned int reg = TPS51632_VOLTAGE_SELECT_REG;
|
||||
int vsel;
|
||||
|
||||
if (tps->enable_pwm_dvfs)
|
||||
reg = TPS51632_VOLTAGE_BASE_REG;
|
||||
|
||||
ret = regmap_read(tps->regmap, reg, &data);
|
||||
if (ret < 0) {
|
||||
dev_err(tps->dev, "reg read failed, err %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
vsel = data & TPS51632_VOUT_MASK;
|
||||
|
||||
if (vsel < TPS51632_MIN_VSEL)
|
||||
return 0;
|
||||
else
|
||||
return vsel - TPS51632_MIN_VSEL;
|
||||
}
|
||||
|
||||
static int tps51632_dcdc_set_voltage_sel(struct regulator_dev *rdev,
|
||||
unsigned selector)
|
||||
{
|
||||
struct tps51632_chip *tps = rdev_get_drvdata(rdev);
|
||||
int vsel;
|
||||
int ret;
|
||||
unsigned int reg = TPS51632_VOLTAGE_SELECT_REG;
|
||||
|
||||
if (tps->enable_pwm_dvfs)
|
||||
reg = TPS51632_VOLTAGE_BASE_REG;
|
||||
|
||||
vsel = selector + TPS51632_MIN_VSEL;
|
||||
if (vsel > TPS51632_MAX_VSEL)
|
||||
return -EINVAL;
|
||||
|
||||
ret = regmap_write(tps->regmap, TPS51632_VOLTAGE_SELECT_REG, vsel);
|
||||
if (ret < 0)
|
||||
dev_err(tps->dev, "reg write failed, err %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev,
|
||||
int ramp_delay)
|
||||
{
|
||||
struct tps51632_chip *tps = rdev_get_drvdata(rdev);
|
||||
int bit = ramp_delay/6000;
|
||||
int ret;
|
||||
|
||||
if (bit)
|
||||
bit--;
|
||||
ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit));
|
||||
if (ret < 0)
|
||||
dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct regulator_ops tps51632_dcdc_ops = {
|
||||
.get_voltage_sel = tps51632_dcdc_get_voltage_sel,
|
||||
.set_voltage_sel = tps51632_dcdc_set_voltage_sel,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
||||
.set_ramp_delay = tps51632_dcdc_set_ramp_delay,
|
||||
};
|
||||
|
||||
static int __devinit tps51632_init_dcdc(struct tps51632_chip *tps,
|
||||
struct tps51632_regulator_platform_data *pdata)
|
||||
{
|
||||
int ret;
|
||||
uint8_t control = 0;
|
||||
int vsel;
|
||||
|
||||
if (!pdata->enable_pwm_dvfs)
|
||||
goto skip_pwm_config;
|
||||
|
||||
control |= TPS51632_DVFS_PWMEN;
|
||||
tps->enable_pwm_dvfs = pdata->enable_pwm_dvfs;
|
||||
vsel = TPS51632_VOLT_VSEL(pdata->base_voltage_uV);
|
||||
ret = regmap_write(tps->regmap, TPS51632_VOLTAGE_BASE_REG, vsel);
|
||||
if (ret < 0) {
|
||||
dev_err(tps->dev, "BASE reg write failed, err %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (pdata->dvfs_step_20mV)
|
||||
control |= TPS51632_DVFS_STEP_20;
|
||||
|
||||
if (pdata->max_voltage_uV) {
|
||||
unsigned int vmax;
|
||||
/**
|
||||
* TPS51632 hw behavior: VMAX register can be write only
|
||||
* once as it get locked after first write. The lock get
|
||||
* reset only when device is power-reset.
|
||||
* Write register only when lock bit is not enabled.
|
||||
*/
|
||||
ret = regmap_read(tps->regmap, TPS51632_VMAX_REG, &vmax);
|
||||
if (ret < 0) {
|
||||
dev_err(tps->dev, "VMAX read failed, err %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
if (!(vmax & TPS51632_VMAX_LOCK)) {
|
||||
vsel = TPS51632_VOLT_VSEL(pdata->max_voltage_uV);
|
||||
ret = regmap_write(tps->regmap, TPS51632_VMAX_REG,
|
||||
vsel);
|
||||
if (ret < 0) {
|
||||
dev_err(tps->dev,
|
||||
"VMAX write failed, err %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
skip_pwm_config:
|
||||
ret = regmap_write(tps->regmap, TPS51632_DVFS_CONTROL_REG, control);
|
||||
if (ret < 0)
|
||||
dev_err(tps->dev, "DVFS reg write failed, err %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static bool rd_wr_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
if ((reg >= 0x8) && (reg <= 0x10))
|
||||
return false;
|
||||
return true;
|
||||
}
|
||||
|
||||
static const struct regmap_config tps51632_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.writeable_reg = rd_wr_reg,
|
||||
.readable_reg = rd_wr_reg,
|
||||
.max_register = TPS51632_MAX_REG - 1,
|
||||
.cache_type = REGCACHE_RBTREE,
|
||||
};
|
||||
|
||||
static int __devinit tps51632_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct tps51632_regulator_platform_data *pdata;
|
||||
struct regulator_dev *rdev;
|
||||
struct tps51632_chip *tps;
|
||||
int ret;
|
||||
struct regulator_config config = { };
|
||||
|
||||
pdata = client->dev.platform_data;
|
||||
if (!pdata) {
|
||||
dev_err(&client->dev, "No Platform data\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
|
||||
if (!tps) {
|
||||
dev_err(&client->dev, "Memory allocation failed\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
tps->dev = &client->dev;
|
||||
tps->desc.name = id->name;
|
||||
tps->desc.id = 0;
|
||||
tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
|
||||
tps->desc.min_uV = TPS51632_MIN_VOLATGE;
|
||||
tps->desc.uV_step = TPS51632_VOLATGE_STEP_10mV;
|
||||
tps->desc.n_voltages = (TPS51632_MAX_VSEL - TPS51632_MIN_VSEL) + 1;
|
||||
tps->desc.ops = &tps51632_dcdc_ops;
|
||||
tps->desc.type = REGULATOR_VOLTAGE;
|
||||
tps->desc.owner = THIS_MODULE;
|
||||
|
||||
tps->regmap = devm_regmap_init_i2c(client, &tps51632_regmap_config);
|
||||
if (IS_ERR(tps->regmap)) {
|
||||
ret = PTR_ERR(tps->regmap);
|
||||
dev_err(&client->dev, "regmap init failed, err %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
i2c_set_clientdata(client, tps);
|
||||
|
||||
ret = tps51632_init_dcdc(tps, pdata);
|
||||
if (ret < 0) {
|
||||
dev_err(tps->dev, "Init failed, err = %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Register the regulators */
|
||||
config.dev = &client->dev;
|
||||
config.init_data = pdata->reg_init_data;
|
||||
config.driver_data = tps;
|
||||
config.regmap = tps->regmap;
|
||||
config.of_node = client->dev.of_node;
|
||||
|
||||
rdev = regulator_register(&tps->desc, &config);
|
||||
if (IS_ERR(rdev)) {
|
||||
dev_err(tps->dev, "regulator register failed\n");
|
||||
return PTR_ERR(rdev);
|
||||
}
|
||||
|
||||
tps->rdev = rdev;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devexit tps51632_remove(struct i2c_client *client)
|
||||
{
|
||||
struct tps51632_chip *tps = i2c_get_clientdata(client);
|
||||
|
||||
regulator_unregister(tps->rdev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id tps51632_id[] = {
|
||||
{.name = "tps51632",},
|
||||
{},
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, tps51632_id);
|
||||
|
||||
static struct i2c_driver tps51632_i2c_driver = {
|
||||
.driver = {
|
||||
.name = "tps51632",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = tps51632_probe,
|
||||
.remove = __devexit_p(tps51632_remove),
|
||||
.id_table = tps51632_id,
|
||||
};
|
||||
|
||||
static int __init tps51632_init(void)
|
||||
{
|
||||
return i2c_add_driver(&tps51632_i2c_driver);
|
||||
}
|
||||
subsys_initcall(tps51632_init);
|
||||
|
||||
static void __exit tps51632_cleanup(void)
|
||||
{
|
||||
i2c_del_driver(&tps51632_i2c_driver);
|
||||
}
|
||||
module_exit(tps51632_cleanup);
|
||||
|
||||
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
|
||||
MODULE_DESCRIPTION("TPS51632 voltage regulator driver");
|
||||
MODULE_LICENSE("GPL v2");
|
|
@ -0,0 +1,47 @@
|
|||
/*
|
||||
* tps51632-regulator.h -- TPS51632 regulator
|
||||
*
|
||||
* Interface for regulator driver for TPS51632 3-2-1 Phase D-Cap Step Down
|
||||
* Driverless Controller with serial VID control and DVFS.
|
||||
*
|
||||
* Copyright (C) 2012 NVIDIA Corporation
|
||||
|
||||
* Author: Laxman Dewangan <ldewangan@nvidia.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __LINUX_REGULATOR_TPS51632_H
|
||||
#define __LINUX_REGULATOR_TPS51632_H
|
||||
|
||||
/*
|
||||
* struct tps51632_regulator_platform_data - tps51632 regulator platform data.
|
||||
*
|
||||
* @reg_init_data: The regulator init data.
|
||||
* @enable_pwm_dvfs: Enable PWM DVFS or not.
|
||||
* @dvfs_step_20mV: Step for DVFS is 20mV or 10mV.
|
||||
* @max_voltage_uV: Maximum possible voltage in PWM-DVFS mode.
|
||||
* @base_voltage_uV: Base voltage when PWM-DVFS enabled.
|
||||
*/
|
||||
struct tps51632_regulator_platform_data {
|
||||
struct regulator_init_data *reg_init_data;
|
||||
bool enable_pwm_dvfs;
|
||||
bool dvfs_step_20mV;
|
||||
int max_voltage_uV;
|
||||
int base_voltage_uV;
|
||||
};
|
||||
|
||||
#endif /* __LINUX_REGULATOR_TPS51632_H */
|
Loading…
Reference in New Issue