USB Serial Keyspan: add support for USA-49WG & USA-28XG

Add support for Keyspan adapters: USA-49WG and USA-28XG

Signed-off-by: Lucy P. McCoy <lucy@keyspan.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/keyspan.c

@@ -115,12 +115,13 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.1.4"
+#define DRIVER_VERSION "v1.1.5"
 #define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
 #define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
 
 #define INSTAT_BUFLEN	32
 #define GLOCONT_BUFLEN	64
+#define INDAT49W_BUFLEN	512
 
 	/* Per device and per port private data */
 struct keyspan_serial_private {
@@ -129,9 +130,15 @@ struct keyspan_serial_private {
 	struct urb	*instat_urb;
 	char		instat_buf[INSTAT_BUFLEN];
 
+	/* added to support 49wg, where data from all 4 ports comes in on 1 EP */
+	/* and high-speed supported */
+	struct urb	*indat_urb;
+	char		indat_buf[INDAT49W_BUFLEN];
+
 	/* XXX this one probably will need a lock */
 	struct urb	*glocont_urb;
 	char		glocont_buf[GLOCONT_BUFLEN];
+	char		ctrl_buf[8];			// for EP0 control message
 };
 
 struct keyspan_port_private {
@@ -179,12 +186,13 @@ struct keyspan_port_private {
 
 	
 /* Include Keyspan message headers.  All current Keyspan Adapters
-   make use of one of four message formats which are referred
+   make use of one of five message formats which are referred
-   to as USA-26, USA-28 and USA-49, USA-90 by Keyspan and within this driver. */
+   to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and within this driver. */
 #include "keyspan_usa26msg.h"
 #include "keyspan_usa28msg.h"
 #include "keyspan_usa49msg.h"
 #include "keyspan_usa90msg.h"
+#include "keyspan_usa67msg.h"
 	
 
 /* Functions used by new usb-serial code. */
@@ -850,13 +858,89 @@ static void	usa49_indat_callback(struct urb *urb)
 		}
 }
 
+static void usa49wg_indat_callback(struct urb *urb)
+{
+	int			i, len, x, err;
+	struct usb_serial	*serial;
+	struct usb_serial_port	*port;
+	struct tty_struct	*tty;
+	unsigned char 		*data = urb->transfer_buffer;
+
+	dbg ("%s", __FUNCTION__);
+
+	serial = urb->context;
+
+	if (urb->status) {
+		dbg("%s - nonzero status: %x", __FUNCTION__, urb->status);
+		return;
+	}
+
+	/* inbound data is in the form P#, len, status, data */
+	i = 0;
+	len = 0;
+
+	if (urb->actual_length) {
+		while (i < urb->actual_length) {
+
+			/* Check port number from message*/
+			if (data[i] >= serial->num_ports) {
+				dbg ("%s - Unexpected port number %d",
+					__FUNCTION__, data[i]);
+				return;
+			}
+			port = serial->port[data[i++]];
+			tty = port->tty;
+			len = data[i++];
+
+			/* 0x80 bit is error flag */
+			if ((data[i] & 0x80) == 0) {
+				/* no error on any byte */
+				i++;
+				for (x = 1; x < len ; ++x)
+					if (port->open_count)
+						tty_insert_flip_char(tty,
+								data[i++], 0);
+					else
+						i++;
+			} else {
+				/*
+				 * some bytes had errors, every byte has status
+				 */
+				for (x = 0; x + 1 < len; x += 2) {
+					int stat = data[i], flag = 0;
+					if (stat & RXERROR_OVERRUN)
+						flag |= TTY_OVERRUN;
+					if (stat & RXERROR_FRAMING)
+						flag |= TTY_FRAME;
+					if (stat & RXERROR_PARITY)
+						flag |= TTY_PARITY;
+					/* XXX should handle break (0x10) */
+					if (port->open_count)
+						tty_insert_flip_char(tty,
+							data[i+1], flag);
+					i += 2;
+				}
+			}
+			if (port->open_count)
+				tty_flip_buffer_push(tty);
+		}
+	}
+
+	/* Resubmit urb so we continue receiving */
+	urb->dev = serial->dev;
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+}
+
 /* not used, usa-49 doesn't have per-port control endpoints */
-static void	usa49_outcont_callback(struct urb *urb)
+static void usa49_outcont_callback(struct urb *urb)
 {
 	dbg ("%s", __FUNCTION__);
 }
 
-static void	usa90_indat_callback(struct urb *urb)
+static void usa90_indat_callback(struct urb *urb)
 {
 	int			i, err;
 	int			endpoint;
@@ -869,7 +953,6 @@ static void	usa90_indat_callback(struct urb *urb)
 
 	endpoint = usb_pipeendpoint(urb->pipe);
 
-
 	if (urb->status) {
 		dbg("%s - nonzero status: %x on endpoint %d.",
 		    __FUNCTION__, urb->status, endpoint);
@@ -995,6 +1078,87 @@ static void	usa90_outcont_callback(struct urb *urb)
 	}
 }
 
+/* Status messages from the 28xg */
+static void	usa67_instat_callback(struct urb *urb)
+{
+	int					err;
+	unsigned char 				*data = urb->transfer_buffer;
+	struct keyspan_usa67_portStatusMessage	*msg;
+	struct usb_serial			*serial;
+	struct usb_serial_port			*port;
+	struct keyspan_port_private	 	*p_priv;
+	int old_dcd_state;
+
+	dbg ("%s", __FUNCTION__);
+
+	serial = urb->context;
+
+	if (urb->status) {
+		dbg("%s - nonzero status: %x", __FUNCTION__, urb->status);
+		return;
+	}
+
+	if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) {
+		dbg("%s - bad length %d", __FUNCTION__, urb->actual_length);
+		return;
+	}
+
+
+	/* Now do something useful with the data */
+	msg = (struct keyspan_usa67_portStatusMessage *)data;
+
+	/* Check port number from message and retrieve private data */
+	if (msg->port >= serial->num_ports) {
+		dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port);
+		return;
+	}
+
+	port = serial->port[msg->port];
+	p_priv = usb_get_serial_port_data(port);
+
+	/* Update handshaking pin state information */
+	old_dcd_state = p_priv->dcd_state;
+	p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
+	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
+
+	if (port->tty && !C_CLOCAL(port->tty)
+	    && old_dcd_state != p_priv->dcd_state) {
+		if (old_dcd_state)
+			tty_hangup(port->tty);
+		/*  else */
+		/*	wake_up_interruptible(&p_priv->open_wait); */
+	}
+
+	/* Resubmit urb so we continue receiving */
+	urb->dev = serial->dev;
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+}
+
+static void usa67_glocont_callback(struct urb *urb)
+{
+	struct usb_serial *serial;
+	struct usb_serial_port *port;
+	struct keyspan_port_private *p_priv;
+	int i;
+
+	dbg ("%s", __FUNCTION__);
+
+	serial = urb->context;
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		p_priv = usb_get_serial_port_data(port);
+
+		if (p_priv->resend_cont) {
+			dbg ("%s - sending setup", __FUNCTION__);
+			keyspan_usa67_send_setup(serial, port,
+						p_priv->resend_cont - 1);
+			break;
+		}
+	}
+}
+
 static int keyspan_write_room (struct usb_serial_port *port)
 {
 	struct keyspan_port_private	*p_priv;
@@ -1311,6 +1475,11 @@ static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint,
 		return NULL;
 	}
 
+	if (endpoint == 0) {
+		/* control EP filled in when used */
+		return urb;
+	}
+
 	ep_desc = find_ep(serial, endpoint);
 	if (!ep_desc) {
 		/* leak the urb, something's wrong and the callers don't care */
@@ -1380,6 +1549,14 @@ static struct callbacks {
 		.outdat_callback =	usa2x_outdat_callback,
 		.inack_callback =	usa28_inack_callback,
 		.outcont_callback =	usa90_outcont_callback,
+	}, {
+		/* msg_usa67 callbacks */
+		.instat_callback =	usa67_instat_callback,
+		.glocont_callback =	usa67_glocont_callback,
+		.indat_callback =	usa26_indat_callback,
+		.outdat_callback =	usa2x_outdat_callback,
+		.inack_callback =	usa26_inack_callback,
+		.outcont_callback =	usa26_outcont_callback,
 	}
 };
 
@@ -1410,6 +1587,11 @@ static void keyspan_setup_urbs(struct usb_serial *serial)
 		 serial, s_priv->instat_buf, INSTAT_BUFLEN,
 		 cback->instat_callback);
 
+	s_priv->indat_urb = keyspan_setup_urb
+		(serial, d_details->indat_endpoint, USB_DIR_IN,
+		 serial, s_priv->indat_buf, INDAT49W_BUFLEN,
+		 usa49wg_indat_callback);
+
 	s_priv->glocont_urb = keyspan_setup_urb
 		(serial, d_details->glocont_endpoint, USB_DIR_OUT,
 		 serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
@@ -1685,8 +1867,8 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	}
 
 	/* Save reset port val for resend.
-	Don't overwrite resend for close condition. */
+	   Don't overwrite resend for open/close condition. */
-	if (p_priv->resend_cont != 3)
+	if ((reset_port + 1) > p_priv->resend_cont)
 		p_priv->resend_cont = reset_port + 1;
 	if (this_urb->status == -EINPROGRESS) {
 		/*  dbg ("%s - already writing", __FUNCTION__); */
@@ -1836,8 +2018,8 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
 	}
 
 	/* Save reset port val for resend.
-	   Don't overwrite resend for close condition. */
+	   Don't overwrite resend for open/close condition. */
-	if (p_priv->resend_cont != 3)
+	if ((reset_port + 1) > p_priv->resend_cont)
 		p_priv->resend_cont = reset_port + 1;
 	if (this_urb->status == -EINPROGRESS) {
 		dbg ("%s already writing", __FUNCTION__);
@@ -1940,11 +2122,11 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 				    struct usb_serial_port *port,
 				    int reset_port)
 {
-	struct keyspan_usa49_portControlMessage	msg;		
+	struct keyspan_usa49_portControlMessage	msg;
+	struct usb_ctrlrequest 			*dr = NULL;
 	struct keyspan_serial_private 		*s_priv;
 	struct keyspan_port_private 		*p_priv;
 	const struct keyspan_device_details	*d_details;
-	int 					glocont_urb;
 	struct urb				*this_urb;
 	int 					err, device_port;
 
@@ -1954,10 +2136,9 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	p_priv = usb_get_serial_port_data(port);
 	d_details = s_priv->device_details;
 
-	glocont_urb = d_details->glocont_endpoint;
 	this_urb = s_priv->glocont_urb;
 
-		/* Work out which port within the device is being setup */
+	/* Work out which port within the device is being setup */
 	device_port = port->number - port->serial->minor;
 
 	dbg("%s - endpoint %d port %d (%d)",__FUNCTION__, usb_pipeendpoint(this_urb->pipe), port->number, device_port);
@@ -1969,9 +2150,10 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	}
 
 	/* Save reset port val for resend.
-	   Don't overwrite resend for close condition. */
+	   Don't overwrite resend for open/close condition. */
-	if (p_priv->resend_cont != 3)
+	if ((reset_port + 1) > p_priv->resend_cont)
 		p_priv->resend_cont = reset_port + 1;
+
 	if (this_urb->status == -EINPROGRESS) {
 		/*  dbg ("%s - already writing", __FUNCTION__); */
 		mdelay(5);
@@ -2083,20 +2265,39 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	msg.dtr = p_priv->dtr_state;
 		
 	p_priv->resend_cont = 0;
-	memcpy (this_urb->transfer_buffer, &msg, sizeof(msg));
-	
-	/* send the data out the device on control endpoint */
-	this_urb->transfer_buffer_length = sizeof(msg);
 
-	this_urb->dev = serial->dev;
+	/* if the device is a 49wg, we send control message on usb control EP 0 */
+
+	if (d_details->product_id == keyspan_usa49wg_product_id) {
+		dr = (void *)(s_priv->ctrl_buf);
+		dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
+		dr->bRequest = 0xB0;	/* 49wg control message */;
+		dr->wValue = 0;
+		dr->wIndex = 0;
+		dr->wLength = cpu_to_le16(sizeof(msg));
+
+		memcpy (s_priv->glocont_buf, &msg, sizeof(msg));
+
+		usb_fill_control_urb(this_urb, serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			     (unsigned char *)dr, s_priv->glocont_buf, sizeof(msg),
+			     usa49_glocont_callback, serial);
+
+	} else {
+		memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+	
+		/* send the data out the device on control endpoint */
+		this_urb->transfer_buffer_length = sizeof(msg);
+
+		this_urb->dev = serial->dev;
+	}
 	if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
 		dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
 	}
 #if 0
 	else {
 		dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__,
-		    outcont_urb, this_urb->transfer_buffer_length,
+			   outcont_urb, this_urb->transfer_buffer_length,
-		    usb_pipeendpoint(this_urb->pipe));
+			   usb_pipeendpoint(this_urb->pipe));
 	}
 #endif
 
@@ -2241,6 +2442,154 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 	return (0);
 }
 
+static int keyspan_usa67_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port)
+{
+	struct keyspan_usa67_portControlMessage	msg;
+	struct keyspan_serial_private 		*s_priv;
+	struct keyspan_port_private 		*p_priv;
+	const struct keyspan_device_details	*d_details;
+	struct urb				*this_urb;
+	int 					err, device_port;
+
+	dbg ("%s", __FUNCTION__);
+
+	s_priv = usb_get_serial_data(serial);
+	p_priv = usb_get_serial_port_data(port);
+	d_details = s_priv->device_details;
+
+	this_urb = s_priv->glocont_urb;
+
+	/* Work out which port within the device is being setup */
+	device_port = port->number - port->serial->minor;
+
+	/* Make sure we have an urb then send the message */
+	if (this_urb == NULL) {
+		dbg("%s - oops no urb for port %d.", __FUNCTION__,
+			port->number);
+		return -1;
+	}
+
+	/* Save reset port val for resend.
+	   Don't overwrite resend for open/close condition. */
+	if ((reset_port + 1) > p_priv->resend_cont)
+		p_priv->resend_cont = reset_port + 1;
+	if (this_urb->status == -EINPROGRESS) {
+		/*  dbg ("%s - already writing", __FUNCTION__); */
+		mdelay(5);
+		return(-1);
+	}
+
+	memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage));
+
+	msg.port = device_port;
+
+	/* Only set baud rate if it's changed */
+	if (p_priv->old_baud != p_priv->baud) {
+		p_priv->old_baud = p_priv->baud;
+		msg.setClocking = 0xff;
+		if (d_details->calculate_baud_rate
+		    (p_priv->baud, d_details->baudclk, &msg.baudHi,
+		     &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
+			dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
+			    p_priv->baud);
+			msg.baudLo = 0;
+			msg.baudHi = 125;	/* Values for 9600 baud */
+			msg.prescaler = 10;
+		}
+		msg.setPrescaler = 0xff;
+	}
+
+	msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
+	switch (p_priv->cflag & CSIZE) {
+	case CS5:
+		msg.lcr |= USA_DATABITS_5;
+		break;
+	case CS6:
+		msg.lcr |= USA_DATABITS_6;
+		break;
+	case CS7:
+		msg.lcr |= USA_DATABITS_7;
+		break;
+	case CS8:
+		msg.lcr |= USA_DATABITS_8;
+		break;
+	}
+	if (p_priv->cflag & PARENB) {
+		/* note USA_PARITY_NONE == 0 */
+		msg.lcr |= (p_priv->cflag & PARODD)?
+			USA_PARITY_ODD: USA_PARITY_EVEN;
+	}
+	msg.setLcr = 0xff;
+
+	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
+	msg.xonFlowControl = 0;
+	msg.setFlowControl = 0xff;
+	msg.forwardingLength = 16;
+	msg.xonChar = 17;
+	msg.xoffChar = 19;
+
+	if (reset_port == 1) {
+		/* Opening port */
+		msg._txOn = 1;
+		msg._txOff = 0;
+		msg.txFlush = 0;
+		msg.txBreak = 0;
+		msg.rxOn = 1;
+		msg.rxOff = 0;
+		msg.rxFlush = 1;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0xff;
+	} else if (reset_port == 2) {
+		/* Closing port */
+		msg._txOn = 0;
+		msg._txOff = 1;
+		msg.txFlush = 0;
+		msg.txBreak = 0;
+		msg.rxOn = 0;
+		msg.rxOff = 1;
+		msg.rxFlush = 1;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0;
+	} else {
+		/* Sending intermediate configs */
+		msg._txOn = (! p_priv->break_on);
+		msg._txOff = 0;
+		msg.txFlush = 0;
+		msg.txBreak = (p_priv->break_on);
+		msg.rxOn = 0;
+		msg.rxOff = 0;
+		msg.rxFlush = 0;
+		msg.rxForward = 0;
+		msg.returnStatus = 0;
+		msg.resetDataToggle = 0x0;
+	}
+
+	/* Do handshaking outputs */
+	msg.setTxTriState_setRts = 0xff;
+	msg.txTriState_rts = p_priv->rts_state;
+
+	msg.setHskoa_setDtr = 0xff;
+	msg.hskoa_dtr = p_priv->dtr_state;
+
+	p_priv->resend_cont = 0;
+
+	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+	/* send the data out the device on control endpoint */
+	this_urb->transfer_buffer_length = sizeof(msg);
+	this_urb->dev = serial->dev;
+
+	err = usb_submit_urb(this_urb, GFP_ATOMIC);
+	if (err != 0)
+		dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__,
+				err);
+	return (0);
+}
+
 static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
 {
 	struct usb_serial *serial = port->serial;
@@ -2265,6 +2614,9 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
 	case msg_usa90:
 		keyspan_usa90_send_setup(serial, port, reset_port);
 		break;
+	case msg_usa67:
+		keyspan_usa67_send_setup(serial, port, reset_port);
+		break;
 	}
 }
 
@@ -2313,9 +2665,19 @@ static int keyspan_startup (struct usb_serial *serial)
 
 	keyspan_setup_urbs(serial);
 
-	s_priv->instat_urb->dev = serial->dev;
+	if (s_priv->instat_urb != NULL) {
-	if ((err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL)) != 0) {
+		s_priv->instat_urb->dev = serial->dev;
-		dbg("%s - submit instat urb failed %d", __FUNCTION__, err);
+		err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
+		if (err != 0)
+			dbg("%s - submit instat urb failed %d", __FUNCTION__,
+				err);
+	}
+	if (s_priv->indat_urb != NULL) {
+		s_priv->indat_urb->dev = serial->dev;
+		err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
+		if (err != 0)
+			dbg("%s - submit indat urb failed %d", __FUNCTION__,
+				err);
 	}
 			
 	return (0);
@@ -2335,6 +2697,7 @@ static void keyspan_shutdown (struct usb_serial *serial)
 	/* Stop reading/writing urbs */
 	stop_urb(s_priv->instat_urb);
 	stop_urb(s_priv->glocont_urb);
+	stop_urb(s_priv->indat_urb);
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		p_priv = usb_get_serial_port_data(port);
@@ -2348,6 +2711,7 @@ static void keyspan_shutdown (struct usb_serial *serial)
 
 	/* Now free them */
 	usb_free_urb(s_priv->instat_urb);
+	usb_free_urb(s_priv->indat_urb);
 	usb_free_urb(s_priv->glocont_urb);
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];

drivers/usb/serial/keyspan.h

@@ -99,6 +99,10 @@ static int  keyspan_usa90_send_setup	(struct usb_serial *serial,
 					 struct usb_serial_port *port,
 					 int reset_port);
 
+static int  keyspan_usa67_send_setup	(struct usb_serial *serial,
+					 struct usb_serial_port *port,
+					 int reset_port);
+
 /* Struct used for firmware - increased size of data section
    to allow Keyspan's 'C' firmware struct to be used unmodified */
 struct ezusb_hex_record {
@@ -229,15 +233,17 @@ struct ezusb_hex_record {
 #define	keyspan_usa28_product_id		0x010f
 #define	keyspan_usa28x_product_id		0x0110
 #define	keyspan_usa28xa_product_id		0x0115
+#define	keyspan_usa28xb_product_id		0x0110
+#define	keyspan_usa28xg_product_id		0x0135
 #define	keyspan_usa49w_product_id		0x010a
 #define	keyspan_usa49wlc_product_id		0x012a
-
+#define	keyspan_usa49wg_product_id		0x0131
 
 struct keyspan_device_details {
 	/* product ID value */
 	int	product_id;
 
-	enum	{msg_usa26, msg_usa28, msg_usa49, msg_usa90} msg_format;
+	enum	{msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format;
 
 		/* Number of physical ports */
 	int	num_ports;
@@ -264,6 +270,9 @@ struct keyspan_device_details {
 		/* Endpoint used for input status */
 	int	instat_endpoint;
 
+		/* Endpoint used for input data 49WG only */
+	int	indat_endpoint;
+
 		/* Endpoint used for global control functions */
 	int	glocont_endpoint;
 
@@ -287,6 +296,7 @@ static const struct keyspan_device_details usa18x_device_details = {
 	.inack_endpoints	= {0x85},
 	.outcont_endpoints	= {0x05},
 	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= 0x07,
 	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
 	.baudclk		= KEYSPAN_USA18X_BAUDCLK,
@@ -303,6 +313,7 @@ static const struct keyspan_device_details usa19_device_details = {
 	.inack_endpoints	= {0x83},
 	.outcont_endpoints	= {0x03},
 	.instat_endpoint	= 0x84,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= -1,
 	.calculate_baud_rate	= keyspan_usa19_calc_baud,
 	.baudclk		= KEYSPAN_USA19_BAUDCLK,
@@ -319,6 +330,7 @@ static const struct keyspan_device_details usa19qi_device_details = {
 	.inack_endpoints	= {0x83},
 	.outcont_endpoints	= {0x03},
 	.instat_endpoint	= 0x84,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= -1,
 	.calculate_baud_rate	= keyspan_usa28_calc_baud,
 	.baudclk		= KEYSPAN_USA19_BAUDCLK,
@@ -335,6 +347,7 @@ static const struct keyspan_device_details mpr_device_details = {
 	.inack_endpoints	= {0x83},
 	.outcont_endpoints	= {0x03},
 	.instat_endpoint	= 0x84,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= -1,
 	.calculate_baud_rate	= keyspan_usa28_calc_baud,
 	.baudclk		= KEYSPAN_USA19_BAUDCLK,
@@ -351,6 +364,7 @@ static const struct keyspan_device_details usa19qw_device_details = {
 	.inack_endpoints	= {0x85},
 	.outcont_endpoints	= {0x05},
 	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= 0x07,
 	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
 	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
@@ -367,6 +381,7 @@ static const struct keyspan_device_details usa19w_device_details = {
 	.inack_endpoints	= {0x85},
 	.outcont_endpoints	= {0x05},
 	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= 0x07,
 	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
 	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
@@ -383,6 +398,7 @@ static const struct keyspan_device_details usa19hs_device_details = {
 	.inack_endpoints	= {-1},
 	.outcont_endpoints	= {0x02},
 	.instat_endpoint	= 0x82,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= -1,
 	.calculate_baud_rate	= keyspan_usa19hs_calc_baud,
 	.baudclk		= KEYSPAN_USA19HS_BAUDCLK,
@@ -399,6 +415,7 @@ static const struct keyspan_device_details usa28_device_details = {
 	.inack_endpoints	= {0x85, 0x86},
 	.outcont_endpoints	= {0x05, 0x06},
 	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= 0x07,
 	.calculate_baud_rate	= keyspan_usa28_calc_baud,
 	.baudclk		= KEYSPAN_USA28_BAUDCLK,		
@@ -415,6 +432,7 @@ static const struct keyspan_device_details usa28x_device_details = {
 	.inack_endpoints	= {0x85, 0x86},
 	.outcont_endpoints	= {0x05, 0x06},
 	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= 0x07,
 	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
 	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
@@ -431,11 +449,28 @@ static const struct keyspan_device_details usa28xa_device_details = {
 	.inack_endpoints	= {0x85, 0x86},
 	.outcont_endpoints	= {0x05, 0x06},
 	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= 0x07,
 	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
 	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
 };
 
+static const struct keyspan_device_details usa28xg_device_details = {
+	.product_id		= keyspan_usa28xg_product_id,
+	.msg_format		= msg_usa67,
+	.num_ports		= 2,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {0x84, 0x88},
+	.outdat_endpoints	= {0x02, 0x06},
+	.inack_endpoints	= {-1, -1},
+	.outcont_endpoints	= {-1, -1},
+	.instat_endpoint	= 0x81,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x01,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
+};
 /* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */
 
 static const struct keyspan_device_details usa49w_device_details = {
@@ -449,6 +484,7 @@ static const struct keyspan_device_details usa49w_device_details = {
 	.inack_endpoints	= {-1, -1, -1, -1},
 	.outcont_endpoints	= {-1, -1, -1, -1},
 	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= 0x07,
 	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
 	.baudclk		= KEYSPAN_USA49W_BAUDCLK,
@@ -465,11 +501,29 @@ static const struct keyspan_device_details usa49wlc_device_details = {
 	.inack_endpoints	= {-1, -1, -1, -1},
 	.outcont_endpoints	= {-1, -1, -1, -1},
 	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
 	.glocont_endpoint	= 0x07,
 	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
 	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
 };
 
+static const struct keyspan_device_details usa49wg_device_details = {
+	.product_id		= keyspan_usa49wg_product_id,
+	.msg_format		= msg_usa49,
+	.num_ports		= 4,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {-1, -1, -1, -1},		/* single 'global' data in EP */
+	.outdat_endpoints	= {0x01, 0x02, 0x04, 0x06},
+	.inack_endpoints	= {-1, -1, -1, -1},
+	.outcont_endpoints	= {-1, -1, -1, -1},
+	.instat_endpoint	= 0x81,
+	.indat_endpoint		= 0x88,
+	.glocont_endpoint	= 0x00,				/* uses control EP */
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
+};
+
 static const struct keyspan_device_details *keyspan_devices[] = {
 	&usa18x_device_details,
 	&usa19_device_details,
@@ -481,9 +535,11 @@ static const struct keyspan_device_details *keyspan_devices[] = {
 	&usa28_device_details,
 	&usa28x_device_details,
 	&usa28xa_device_details,
+	&usa28xg_device_details,
 	/* 28xb not required as it renumerates as a 28x */
 	&usa49w_device_details,
 	&usa49wlc_device_details,
+	&usa49wg_device_details,
 	NULL,
 };
 
@@ -510,8 +566,11 @@ static struct usb_device_id keyspan_ids_combined[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
 	{ } /* Terminating entry */
 };
 
@@ -557,12 +616,15 @@ static struct usb_device_id keyspan_2port_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
 	{ } /* Terminating entry */
 };
 
 static struct usb_device_id keyspan_4port_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
 	{ } /* Terminating entry */
 };
 
@@ -573,7 +635,6 @@ static struct usb_serial_driver keyspan_pre_device = {
 		.name		= "keyspan_no_firm",
 	},
 	.description		= "Keyspan - (without firmware)",
-	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_pre_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
@@ -588,7 +649,6 @@ static struct usb_serial_driver keyspan_1port_device = {
 		.name		= "keyspan_1",
 	},
 	.description		= "Keyspan 1 port adapter",
-	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_1port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
@@ -616,7 +676,6 @@ static struct usb_serial_driver keyspan_2port_device = {
 		.name		= "keyspan_2",
 	},
 	.description		= "Keyspan 2 port adapter",
-	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_2port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
@@ -644,11 +703,10 @@ static struct usb_serial_driver keyspan_4port_device = {
 		.name		= "keyspan_4",
 	},
 	.description		= "Keyspan 4 port adapter",
-	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_4port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
-	.num_bulk_in		= 5,
+	.num_bulk_in		= NUM_DONT_CARE,
-	.num_bulk_out		= 5,
+	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 4,
 	.open			= keyspan_open,
 	.close			= keyspan_close,

drivers/usb/serial/keyspan_usa67msg.h

@@ -0,0 +1,254 @@
+/*
+	usa67msg.h
+
+	Copyright (c) 1998-2007 InnoSys Incorporated.  All Rights Reserved
+	This file is available under a BSD-style copyright
+
+	Keyspan USB Async Firmware to run on Anchor FX1
+
+	Redistribution and use in source and binary forms, with or without
+	modification, are permitted provided that the following conditions are
+	met:
+
+	1. Redistributions of source code must retain this licence text
+   	without modification, this list of conditions, and the following
+   	disclaimer.  The following copyright notice must appear immediately at
+   	the beginning of all source files:
+
+        	Copyright (c) 1998-2007 InnoSys Incorporated.  All Rights Reserved
+
+        	This file is available under a BSD-style copyright
+
+	2. Redistributions in binary form must reproduce the above copyright
+   	notice, this list of conditions and the following disclaimer in the
+   	documentation and/or other materials provided with the distribution.
+
+	3. The name of InnoSys Incorprated may not be used to endorse or promote
+   	products derived from this software without specific prior written
+   	permission.
+
+	THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
+	IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+	NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+	INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+	(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+	SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+	CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+	LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+	OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+	SUCH DAMAGE.
+
+	Fourth revision: This message format supports the USA28XG
+
+	Buffer formats for RX/TX data messages are not defined by
+	a structure, but are described here:
+
+	USB OUT (host -> USAxx, transmit) messages contain a
+	REQUEST_ACK indicator (set to 0xff to request an ACK at the
+	completion of transmit; 0x00 otherwise), followed by data:
+
+		RQSTACK DAT DAT DAT ...
+
+	with a total data length of up to 63.
+
+	USB IN (USAxx -> host, receive) messages begin with a status
+	byte in which the 0x80 bit is either:
+
+		(a)	0x80 bit clear
+			indicates that the bytes following it are all data
+			bytes:
+
+				STAT DATA DATA DATA DATA DATA ...
+
+			for a total of up to 63 DATA bytes,
+
+	or:
+
+		(b)	0x80 bit set
+			indiates that the bytes following alternate data and
+			status bytes:
+
+				STAT DATA STAT DATA STAT DATA STAT DATA ...
+
+			for a total of up to 32 DATA bytes.
+
+	The valid bits in the STAT bytes are:
+
+		OVERRUN	0x02
+		PARITY	0x04
+		FRAMING	0x08
+		BREAK	0x10
+
+	Notes:
+
+	(1) The OVERRUN bit can appear in either (a) or (b) format
+		messages, but the but the PARITY/FRAMING/BREAK bits
+		only appear in (b) format messages.
+	(2) For the host to determine the exact point at which the
+		overrun occurred (to identify the point in the data
+		stream at which the data was lost), it needs to count
+		128 characters, starting at the first character of the
+		message in which OVERRUN was reported; the lost character(s)
+		would have been received between the 128th and 129th
+		characters.
+	(3)	An RX data message in which the first byte has 0x80 clear
+		serves as a "break off" indicator.
+
+	revision history:
+
+	1999feb10	add reportHskiaChanges to allow us to ignore them
+	1999feb10	add txAckThreshold for fast+loose throughput enhancement
+	1999mar30	beef up support for RX error reporting
+	1999apr14	add resetDataToggle to control message
+	2000jan04	merge with usa17msg.h
+	2000jun01	add extended BSD-style copyright text
+	2001jul05	change message format to improve OVERRUN case
+	2002jun05	update copyright date, improve comments
+	2006feb06	modify for FX1 chip
+
+*/
+
+#ifndef	__USA67MSG__
+#define	__USA67MSG__
+
+
+// all things called "ControlMessage" are sent on the 'control' endpoint
+
+typedef struct keyspan_usa67_portControlMessage
+{
+	u8	port;		// 0 or 1 (selects port)
+	/*
+		there are three types of "commands" sent in the control message:
+
+		1.	configuration changes which must be requested by setting
+			the corresponding "set" flag (and should only be requested
+			when necessary, to reduce overhead on the device):
+	*/
+	u8	setClocking,	// host requests baud rate be set
+		baudLo,			// host does baud divisor calculation
+		baudHi,			// baudHi is only used for first port (gives lower rates)
+		externalClock_txClocking,
+						// 0=internal, other=external
+
+		setLcr,			// host requests lcr be set
+		lcr,			// use PARITY, STOPBITS, DATABITS below
+
+		setFlowControl,	// host requests flow control be set
+		ctsFlowControl,	// 1=use CTS flow control, 0=don't
+		xonFlowControl,	// 1=use XON/XOFF flow control, 0=don't
+		xonChar,		// specified in current character format
+		xoffChar,		// specified in current character format
+
+		setTxTriState_setRts,
+						// host requests TX tri-state be set
+		txTriState_rts,	// 1=active (normal), 0=tristate (off)
+
+		setHskoa_setDtr,
+						// host requests HSKOA output be set
+		hskoa_dtr,		// 1=on, 0=off
+
+		setPrescaler,	// host requests prescalar be set (default: 13)
+		prescaler;		// specified as N/8; values 8-ff are valid
+						// must be set any time internal baud rate is set;
+						// must not be set when external clocking is used
+
+	/*
+		3.	configuration data which is simply used as is (no overhead,
+			but must be specified correctly in every host message).
+	*/
+	u8	forwardingLength,  // forward when this number of chars available
+		reportHskiaChanges_dsrFlowControl,
+						// 1=normal; 0=ignore external clock
+						// 1=use DSR flow control, 0=don't
+		txAckThreshold,	// 0=not allowed, 1=normal, 2-255 deliver ACK faster
+		loopbackMode;	// 0=no loopback, 1=loopback enabled
+
+	/*
+		4.	commands which are flags only; these are processed in order
+			(so that, e.g., if both _txOn and _txOff flags are set, the
+			port ends in a TX_OFF state); any non-zero value is respected
+	*/
+	u8	_txOn,			// enable transmitting (and continue if there's data)
+		_txOff,			// stop transmitting
+		txFlush,		// toss outbound data
+		txBreak,		// turn on break (cleared by _txOn)
+		rxOn,			// turn on receiver
+		rxOff,			// turn off receiver
+		rxFlush,		// toss inbound data
+		rxForward,		// forward all inbound data, NOW (as if fwdLen==1)
+		returnStatus,	// return current status (even if it hasn't changed)
+		resetDataToggle;// reset data toggle state to DATA0
+
+} keyspan_usa67_portControlMessage;
+
+// defines for bits in lcr
+#define	USA_DATABITS_5		0x00
+#define	USA_DATABITS_6		0x01
+#define	USA_DATABITS_7		0x02
+#define	USA_DATABITS_8		0x03
+#define	STOPBITS_5678_1		0x00	// 1 stop bit for all byte sizes
+#define	STOPBITS_5_1p5		0x04	// 1.5 stop bits for 5-bit byte
+#define	STOPBITS_678_2		0x04	// 2 stop bits for 6/7/8-bit byte
+#define	USA_PARITY_NONE		0x00
+#define	USA_PARITY_ODD		0x08
+#define	USA_PARITY_EVEN		0x18
+#define	PARITY_1			0x28
+#define	PARITY_0			0x38
+
+// all things called "StatusMessage" are sent on the status endpoint
+
+typedef struct keyspan_usa67_portStatusMessage	// one for each port
+{
+	u8	port,			// 0=first, 1=second, other=see below
+		hskia_cts,		// reports HSKIA pin
+		gpia_dcd,		// reports GPIA pin
+		_txOff,			// port has been disabled (by host)
+		_txXoff,		// port is in XOFF state (either host or RX XOFF)
+		txAck,			// indicates a TX message acknowledgement
+		rxEnabled,		// as configured by rxOn/rxOff 1=on, 0=off
+		controlResponse;// 1=a control message has been processed
+} keyspan_usa67_portStatusMessage;
+
+// bits in RX data message when STAT byte is included
+#define	RXERROR_OVERRUN	0x02
+#define	RXERROR_PARITY	0x04
+#define	RXERROR_FRAMING	0x08
+#define	RXERROR_BREAK	0x10
+
+typedef struct keyspan_usa67_globalControlMessage
+{
+	u8	port,	 			// 3
+		sendGlobalStatus,	// 2=request for two status responses
+		resetStatusToggle,	// 1=reset global status toggle
+		resetStatusCount;	// a cycling value
+} keyspan_usa67_globalControlMessage;
+
+typedef struct keyspan_usa67_globalStatusMessage
+{
+	u8	port,				// 3
+		sendGlobalStatus,	// from request, decremented
+		resetStatusCount;	// as in request
+} keyspan_usa67_globalStatusMessage;
+
+typedef struct keyspan_usa67_globalDebugMessage
+{
+	u8	port,				// 2
+		a,
+		b,
+		c,
+		d;
+} keyspan_usa67_globalDebugMessage;
+
+// ie: the maximum length of an FX1 endpoint buffer
+#define	MAX_DATA_LEN			64
+
+// update status approx. 60 times a second (16.6666 ms)
+#define	STATUS_UPDATE_INTERVAL	16
+
+// status rationing tuning value (each port gets checked each n ms)
+#define	STATUS_RATION	10
+
+#endif
+
+