openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

[PATCH] irq-flags: drivers/char: Use the new IRQF_ constants 

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Thomas Gleixner 2006-07-01 19:29:33 -07:00 committed by Linus Torvalds
parent 69ab3912d1
commit 0f2ed4c6ba
37 changed files with 77 additions and 77 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/char/amiserial.c
View File

@ -2051,7 +2051,7 @@ static int __init rs_init(void)
/* set ISRs, and then disable the rx interrupts */
request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
request_irq(IRQ_AMIGA_RBF, ser_rx_int, SA_INTERRUPT, "serial RX", state);
request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED, "serial RX", state);
/* turn off Rx and Tx interrupts */
custom.intena = IF_RBF | IF_TBE;

4
drivers/char/applicom.c
View File

@ -229,7 +229,7 @@ static int __init applicom_init(void)
continue;
}
if (request_irq(dev->irq, &ac_interrupt, SA_SHIRQ, "Applicom PCI", &dummy)) {
if (request_irq(dev->irq, &ac_interrupt, IRQF_SHARED, "Applicom PCI", &dummy)) {
printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq);
iounmap(RamIO);
pci_disable_device(dev);
@ -276,7 +276,7 @@ static int __init applicom_init(void)
printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq);
if (!numisa) {
if (request_irq(irq, &ac_interrupt, SA_SHIRQ, "Applicom ISA", &dummy)) {
if (request_irq(irq, &ac_interrupt, IRQF_SHARED, "Applicom ISA", &dummy)) {
printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq);
iounmap(RamIO);
apbs[boardno - 1].RamIO = NULL;

8
drivers/char/cyclades.c
View File

@ -4612,7 +4612,7 @@ cy_detect_isa(void)
/* allocate IRQ */
if(request_irq(cy_isa_irq, cyy_interrupt,
SA_INTERRUPT, "Cyclom-Y", &cy_card[j]))
IRQF_DISABLED, "Cyclom-Y", &cy_card[j]))
{
printk("Cyclom-Y/ISA found at 0x%lx ",
(unsigned long) cy_isa_address);
@ -4785,7 +4785,7 @@ cy_detect_pci(void)
/* allocate IRQ */
if(request_irq(cy_pci_irq, cyy_interrupt,
SA_SHIRQ, "Cyclom-Y", &cy_card[j]))
IRQF_SHARED, "Cyclom-Y", &cy_card[j]))
{
printk("Cyclom-Y/PCI found at 0x%lx ",
(ulong) cy_pci_phys2);
@ -4965,7 +4965,7 @@ cy_detect_pci(void)
/* allocate IRQ only if board has an IRQ */
if( (cy_pci_irq != 0) && (cy_pci_irq != 255) ) {
if(request_irq(cy_pci_irq, cyz_interrupt,
SA_SHIRQ, "Cyclades-Z", &cy_card[j]))
IRQF_SHARED, "Cyclades-Z", &cy_card[j]))
{
printk("Cyclom-8Zo/PCI found at 0x%lx ",
(ulong) cy_pci_phys2);
@ -5059,7 +5059,7 @@ cy_detect_pci(void)
/* allocate IRQ only if board has an IRQ */
if( (cy_pci_irq != 0) && (cy_pci_irq != 255) ) {
if(request_irq(cy_pci_irq, cyz_interrupt,
SA_SHIRQ, "Cyclades-Z", &cy_card[j]))
IRQF_SHARED, "Cyclades-Z", &cy_card[j]))
{
printk("Cyclom-Ze/PCI found at 0x%lx ",
(ulong) cy_pci_phys2);

2
drivers/char/esp.c
View File

@ -883,7 +883,7 @@ static int startup(struct esp_struct * info)
* Allocate the IRQ
*/
retval = request_irq(info->irq, rs_interrupt_single, SA_SHIRQ,
retval = request_irq(info->irq, rs_interrupt_single, IRQF_SHARED,
"esp serial", info);
if (retval) {

2
drivers/char/ftape/lowlevel/fdc-io.c
View File

@ -1268,7 +1268,7 @@ static int fdc_grab_irq_and_dma(void)
/* Get fast interrupt handler.
*/
if (request_irq(fdc.irq, ftape_interrupt,
SA_INTERRUPT, "ft", ftape_id)) {
IRQF_DISABLED, "ft", ftape_id)) {
TRACE_ABORT(-EIO, ft_t_bug,
"Unable to grab IRQ%d for ftape driver",
fdc.irq);

2
drivers/char/hpet.c
View File

@ -395,7 +395,7 @@ static int hpet_ioctl_ieon(struct hpet_dev *devp)
sprintf(devp->hd_name, "hpet%d", (int)(devp - hpetp->hp_dev));
irq_flags = devp->hd_flags & HPET_SHARED_IRQ
? SA_SHIRQ : SA_INTERRUPT;
? IRQF_SHARED : IRQF_DISABLED;
if (request_irq(irq, hpet_interrupt, irq_flags,
devp->hd_name, (void *)devp)) {
printk(KERN_ERR "hpet: IRQ %d is not free\n", irq);

2
drivers/char/hvc_console.c
View File

@ -346,7 +346,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
spin_unlock_irqrestore(&hp->lock, flags);
/* check error, fallback to non-irq */
if (irq != NO_IRQ)
rc = request_irq(irq, hvc_handle_interrupt, SA_INTERRUPT, "hvc_console", hp);
rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED, "hvc_console", hp);
/*
* If the request_irq() fails and we return an error. The tty layer

2
drivers/char/hvcs.c
View File

@ -899,7 +899,7 @@ static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address,
* the conn was registered and now.
*/
if (!(rc = request_irq(irq, &hvcs_handle_interrupt,
SA_INTERRUPT, "ibmhvcs", hvcsd))) {
IRQF_DISABLED, "ibmhvcs", hvcsd))) {
/*
* It is possible the vty-server was removed after the irq was
* requested but before we have time to enable interrupts.

2
drivers/char/hvsi.c
View File

@ -1168,7 +1168,7 @@ static int __init hvsi_init(void)
struct hvsi_struct *hp = &hvsi_ports[i];
int ret = 1;
ret = request_irq(hp->virq, hvsi_interrupt, SA_INTERRUPT, "hvsi", hp);
ret = request_irq(hp->virq, hvsi_interrupt, IRQF_DISABLED, "hvsi", hp);
if (ret)
printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n",
hp->virq, ret);

6
drivers/char/ip2/ip2main.c
View File

@ -491,8 +491,8 @@ static struct tty_operations ip2_ops = {
/* initialisation of the devices and driver structures, and registers itself */
/* with the relevant kernel modules. */
/******************************************************************************/
/* SA_INTERRUPT- if set blocks all interrupts else only this line */
/* SA_SHIRQ - for shared irq PCI or maybe EISA only */
/* IRQF_DISABLED - if set blocks all interrupts else only this line */
/* IRQF_SHARED - for shared irq PCI or maybe EISA only */
/* SA_RANDOM - can be source for cert. random number generators */
#define IP2_SA_FLAGS 0
@ -753,7 +753,7 @@ ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize)
if (have_requested_irq(ip2config.irq[i]))
continue;
rc = request_irq( ip2config.irq[i], ip2_interrupt,
IP2_SA_FLAGS | (ip2config.type[i] == PCI ? SA_SHIRQ : 0),
IP2_SA_FLAGS | (ip2config.type[i] == PCI ? IRQF_SHARED : 0),
pcName, (void *)&pcName);
if (rc) {
printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc);

4
drivers/char/ipmi/ipmi_si_intf.c
View File

@ -1041,7 +1041,7 @@ static int std_irq_setup(struct smi_info *info)
if (info->si_type == SI_BT) {
rv = request_irq(info->irq,
si_bt_irq_handler,
SA_INTERRUPT,
IRQF_DISABLED,
DEVICE_NAME,
info);
if (!rv)
@ -1051,7 +1051,7 @@ static int std_irq_setup(struct smi_info *info)
} else
rv = request_irq(info->irq,
si_irq_handler,
SA_INTERRUPT,
IRQF_DISABLED,
DEVICE_NAME,
info);
if (rv) {

4
drivers/char/isicom.c
View File

@ -1614,14 +1614,14 @@ static int __devinit isicom_register_isr(struct pci_dev *pdev,
const unsigned int index)
{
struct isi_board *board = pci_get_drvdata(pdev);
unsigned long irqflags = SA_INTERRUPT;
unsigned long irqflags = IRQF_DISABLED;
int retval = -EINVAL;
if (!board->base)
goto end;
if (board->isa == NO)
irqflags |= SA_SHIRQ;
irqflags |= IRQF_SHARED;
retval = request_irq(board->irq, isicom_interrupt, irqflags,
ISICOM_NAME, board);

2
drivers/char/ite_gpio.c
View File

@ -397,7 +397,7 @@ int __init ite_gpio_init(void)
init_waitqueue_head(&ite_gpio_wait[i]);
}
if (request_irq(ite_gpio_irq, ite_gpio_irq_handler, SA_SHIRQ, "gpio", 0) < 0) {
if (request_irq(ite_gpio_irq, ite_gpio_irq_handler, IRQF_SHARED, "gpio", 0) < 0) {
misc_deregister(&ite_gpio_miscdev);
release_region(ite_gpio_base, 0x1c);
return 0;

6
drivers/char/mbcs.c
View File

@ -592,7 +592,7 @@ static int mbcs_intr_alloc(struct cx_dev *dev)
getdma->intrHostDest = sn_irq->irq_xtalkaddr;
getdma->intrVector = sn_irq->irq_irq;
if (request_irq(sn_irq->irq_irq,
(void *)mbcs_completion_intr_handler, SA_SHIRQ,
(void *)mbcs_completion_intr_handler, IRQF_SHARED,
"MBCS get intr", (void *)soft)) {
tiocx_irq_free(soft->get_sn_irq);
return -EAGAIN;
@ -608,7 +608,7 @@ static int mbcs_intr_alloc(struct cx_dev *dev)
putdma->intrHostDest = sn_irq->irq_xtalkaddr;
putdma->intrVector = sn_irq->irq_irq;
if (request_irq(sn_irq->irq_irq,
(void *)mbcs_completion_intr_handler, SA_SHIRQ,
(void *)mbcs_completion_intr_handler, IRQF_SHARED,
"MBCS put intr", (void *)soft)) {
tiocx_irq_free(soft->put_sn_irq);
free_irq(soft->get_sn_irq->irq_irq, soft);
@ -628,7 +628,7 @@ static int mbcs_intr_alloc(struct cx_dev *dev)
algo->intrHostDest = sn_irq->irq_xtalkaddr;
algo->intrVector = sn_irq->irq_irq;
if (request_irq(sn_irq->irq_irq,
(void *)mbcs_completion_intr_handler, SA_SHIRQ,
(void *)mbcs_completion_intr_handler, IRQF_SHARED,
"MBCS algo intr", (void *)soft)) {
tiocx_irq_free(soft->algo_sn_irq);
free_irq(soft->put_sn_irq->irq_irq, soft);

2
drivers/char/mmtimer.c
View File

@ -687,7 +687,7 @@ static int __init mmtimer_init(void)
mmtimer_femtoperiod = ((unsigned long)1E15 + sn_rtc_cycles_per_second /
2) / sn_rtc_cycles_per_second;
if (request_irq(SGI_MMTIMER_VECTOR, mmtimer_interrupt, SA_PERCPU_IRQ, MMTIMER_NAME, NULL)) {
if (request_irq(SGI_MMTIMER_VECTOR, mmtimer_interrupt, IRQF_PERCPU, MMTIMER_NAME, NULL)) {
printk(KERN_WARNING "%s: unable to allocate interrupt.",
MMTIMER_NAME);
return -1;

2
drivers/char/mxser.c
View File

@ -94,7 +94,7 @@
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK|\
IXON|IXOFF))
#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED : IRQF_DISABLED)
#define C168_ASIC_ID 1
#define C104_ASIC_ID 2

2
drivers/char/nwbutton.c
View File

@ -223,7 +223,7 @@ static int __init nwbutton_init(void)
return -EBUSY;
}
if (request_irq (IRQ_NETWINDER_BUTTON, button_handler, SA_INTERRUPT,
if (request_irq (IRQ_NETWINDER_BUTTON, button_handler, IRQF_DISABLED,
"nwbutton", NULL)) {
printk (KERN_WARNING "nwbutton: IRQ %d is not free.\n",
IRQ_NETWINDER_BUTTON);

2
drivers/char/qtronix.c
View File

@ -144,7 +144,7 @@ void __init init_qtronix_990P_kbd(void)
cir_port_init(cir);
retval = request_irq(IT8172_CIR0_IRQ, kbd_int_handler,
(unsigned long )(SA_INTERRUPT|SA_SHIRQ),
(unsigned long )(IRQF_DISABLED|IRQF_SHARED),
(const char *)"Qtronix IR Keyboard", (void *)cir);
if (retval) {

2
drivers/char/riscom8.c
View File

@ -625,7 +625,7 @@ static inline int rc_setup_board(struct riscom_board * bp)
if (bp->flags & RC_BOARD_ACTIVE)
return 0;
error = request_irq(bp->irq, rc_interrupt, SA_INTERRUPT,
error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED,
"RISCom/8", NULL);
if (error)
return error;

6
drivers/char/rtc.c
View File

@ -220,7 +220,7 @@ static inline unsigned char rtc_is_updating(void)
#ifdef RTC_IRQ
/*
* A very tiny interrupt handler. It runs with SA_INTERRUPT set,
* A very tiny interrupt handler. It runs with IRQF_DISABLED set,
* but there is possibility of conflicting with the set_rtc_mmss()
* call (the rtc irq and the timer irq can easily run at the same
* time in two different CPUs). So we need to serialize
@ -958,7 +958,7 @@ static int __init rtc_init(void)
* XXX Interrupt pin #7 in Espresso is shared between RTC and
* PCI Slot 2 INTA# (and some INTx# in Slot 1).
*/
if (request_irq(rtc_irq, rtc_interrupt, SA_SHIRQ, "rtc", (void *)&rtc_port)) {
if (request_irq(rtc_irq, rtc_interrupt, IRQF_SHARED, "rtc", (void *)&rtc_port)) {
printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq);
return -EIO;
}
@ -976,7 +976,7 @@ static int __init rtc_init(void)
rtc_int_handler_ptr = rtc_interrupt;
}
if(request_irq(RTC_IRQ, rtc_int_handler_ptr, SA_INTERRUPT, "rtc", NULL)) {
if(request_irq(RTC_IRQ, rtc_int_handler_ptr, IRQF_DISABLED, "rtc", NULL)) {
/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
release_region(RTC_PORT(0), RTC_IO_EXTENT);

4
drivers/char/s3c2410-rtc.c
View File

@ -341,13 +341,13 @@ static int s3c2410_rtc_open(void)
int ret;
ret = request_irq(s3c2410_rtc_alarmno, s3c2410_rtc_alarmirq,
SA_INTERRUPT, "s3c2410-rtc alarm", NULL);
IRQF_DISABLED, "s3c2410-rtc alarm", NULL);
if (ret)
printk(KERN_ERR "IRQ%d already in use\n", s3c2410_rtc_alarmno);
ret = request_irq(s3c2410_rtc_tickno, s3c2410_rtc_tickirq,
SA_INTERRUPT, "s3c2410-rtc tick", NULL);
IRQF_DISABLED, "s3c2410-rtc tick", NULL);
if (ret) {
printk(KERN_ERR "IRQ%d already in use\n", s3c2410_rtc_tickno);

2
drivers/char/snsc.c
View File

@ -105,7 +105,7 @@ scdrv_open(struct inode *inode, struct file *file)
/* hook this subchannel up to the system controller interrupt */
rv = request_irq(SGI_UART_VECTOR, scdrv_interrupt,
SA_SHIRQ | SA_INTERRUPT,
IRQF_SHARED | IRQF_DISABLED,
SYSCTL_BASENAME, sd);
if (rv) {
ia64_sn_irtr_close(sd->sd_nasid, sd->sd_subch);

2
drivers/char/snsc_event.c
View File

@ -310,7 +310,7 @@ scdrv_event_init(struct sysctl_data_s *scd)
/* hook event subchannel up to the system controller interrupt */
rv = request_irq(SGI_UART_VECTOR, scdrv_event_interrupt,
SA_SHIRQ | SA_INTERRUPT,
IRQF_SHARED | IRQF_DISABLED,
"system controller events", event_sd);
if (rv) {
printk(KERN_WARNING "%s: irq request failed (%d)\n",

2
drivers/char/sonypi.c
View File

@ -1282,7 +1282,7 @@ static int __devinit sonypi_setup_irq(struct sonypi_device *dev,
while (irq_list->irq) {
if (!request_irq(irq_list->irq, sonypi_irq,
SA_SHIRQ, "sonypi", sonypi_irq)) {
IRQF_SHARED, "sonypi", sonypi_irq)) {
dev->irq = irq_list->irq;
dev->bits = irq_list->bits;
return 0;

4
drivers/char/specialix.c
View File

@ -1015,9 +1015,9 @@ static inline int sx_setup_board(struct specialix_board * bp)
return 0;
if (bp->flags & SX_BOARD_IS_PCI)
error = request_irq(bp->irq, sx_interrupt, SA_INTERRUPT | SA_SHIRQ, "specialix IO8+", bp);
error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp);
else
error = request_irq(bp->irq, sx_interrupt, SA_INTERRUPT, "specialix IO8+", bp);
error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED, "specialix IO8+", bp);
if (error)
return error;

4
drivers/char/stallion.c
View File

@ -2302,7 +2302,7 @@ static inline int stl_initeio(stlbrd_t *brdp)
brdp->nrpanels = 1;
brdp->state |= BRD_FOUND;
brdp->hwid = status;
if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) {
if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
printk("STALLION: failed to register interrupt "
"routine for %s irq=%d\n", name, brdp->irq);
rc = -ENODEV;
@ -2512,7 +2512,7 @@ static inline int stl_initech(stlbrd_t *brdp)
outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
brdp->state |= BRD_FOUND;
if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) {
if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
printk("STALLION: failed to register interrupt "
"routine for %s irq=%d\n", name, brdp->irq);
i = -ENODEV;

4
drivers/char/sx.c
View File

@ -1993,7 +1993,7 @@ static int sx_init_board (struct sx_board *board)
if(board->irq > 0) {
/* fixed irq, probably PCI */
if(sx_irqmask & (1 << board->irq)) { /* may we use this irq? */
if(request_irq(board->irq, sx_interrupt, SA_SHIRQ | SA_INTERRUPT, "sx", board)) {
if(request_irq(board->irq, sx_interrupt, IRQF_SHARED | IRQF_DISABLED, "sx", board)) {
printk(KERN_ERR "sx: Cannot allocate irq %d.\n", board->irq);
board->irq = 0;
}
@ -2005,7 +2005,7 @@ static int sx_init_board (struct sx_board *board)
int irqmask = sx_irqmask & (IS_SX_BOARD(board) ? SX_ISA_IRQ_MASK : SI2_ISA_IRQ_MASK);
for(irqnr = 15; irqnr > 0; irqnr--)
if(irqmask & (1 << irqnr))
if(! request_irq(irqnr, sx_interrupt, SA_SHIRQ | SA_INTERRUPT, "sx", board))
if(! request_irq(irqnr, sx_interrupt, IRQF_SHARED | IRQF_DISABLED, "sx", board))
break;
if(! irqnr)
printk(KERN_ERR "sx: Cannot allocate IRQ.\n");

2
drivers/char/synclink.c
View File

@ -8150,7 +8150,7 @@ static int __devinit synclink_init_one (struct pci_dev *dev,
info->bus_type = MGSL_BUS_TYPE_PCI;
info->io_addr_size = 8;
info->irq_flags = SA_SHIRQ;
info->irq_flags = IRQF_SHARED;
if (dev->device == 0x0210) {
/* Version 1 PCI9030 based universal PCI adapter */

2
drivers/char/synclink_gt.c
View File

@ -3343,7 +3343,7 @@ static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev
info->phys_reg_addr = pci_resource_start(pdev,0);
info->bus_type = MGSL_BUS_TYPE_PCI;
info->irq_flags = SA_SHIRQ;
info->irq_flags = IRQF_SHARED;
info->init_error = -1; /* assume error, set to 0 on successful init */
}

2
drivers/char/synclinkmp.c
View File

@ -3835,7 +3835,7 @@ static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
info->phys_statctrl_base &= ~(PAGE_SIZE-1);
info->bus_type = MGSL_BUS_TYPE_PCI;
info->irq_flags = SA_SHIRQ;
info->irq_flags = IRQF_SHARED;
init_timer(&info->tx_timer);
info->tx_timer.data = (unsigned long)info;

2
drivers/char/tlclk.c
View File

@ -208,7 +208,7 @@ static int tlclk_open(struct inode *inode, struct file *filp)
/* This device is wired through the FPGA IO space of the ATCA blade
* we can't share this IRQ */
result = request_irq(telclk_interrupt, &tlclk_interrupt,
SA_INTERRUPT, "telco_clock", tlclk_interrupt);
IRQF_DISABLED, "telco_clock", tlclk_interrupt);
if (result == -EBUSY) {
printk(KERN_ERR "tlclk: Interrupt can't be reserved.\n");
return -EBUSY;

4
drivers/char/tpm/tpm_tis.c
View File

@ -522,7 +522,7 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
iowrite8(i, chip->vendor.iobase +
TPM_INT_VECTOR(chip->vendor.locality));
if (request_irq
(i, tis_int_probe, SA_SHIRQ,
(i, tis_int_probe, IRQF_SHARED,
chip->vendor.miscdev.name, chip) != 0) {
dev_info(chip->dev,
"Unable to request irq: %d for probe\n",
@ -557,7 +557,7 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
chip->vendor.iobase +
TPM_INT_VECTOR(chip->vendor.locality));
if (request_irq
(chip->vendor.irq, tis_int_handler, SA_SHIRQ,
(chip->vendor.irq, tis_int_handler, IRQF_SHARED,
chip->vendor.miscdev.name, chip) != 0) {
dev_info(chip->dev,
"Unable to request irq: %d for use\n",

48
drivers/char/vme_scc.c
View File

@ -203,13 +203,13 @@ static int mvme147_scc_init(void)
port->datap = port->ctrlp + 1;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
"SCC-A TX", port);
request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-A status", port);
request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
"SCC-A RX", port);
request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-A special cond", port);
{
SCC_ACCESS_INIT(port);
@ -230,13 +230,13 @@ static int mvme147_scc_init(void)
port->datap = port->ctrlp + 1;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
"SCC-B TX", port);
request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-B status", port);
request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
"SCC-B RX", port);
request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-B special cond", port);
{
SCC_ACCESS_INIT(port);
@ -273,13 +273,13 @@ static int mvme162_scc_init(void)
port->datap = port->ctrlp + 2;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
"SCC-A TX", port);
request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-A status", port);
request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
"SCC-A RX", port);
request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-A special cond", port);
{
SCC_ACCESS_INIT(port);
@ -300,13 +300,13 @@ static int mvme162_scc_init(void)
port->datap = port->ctrlp + 2;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
"SCC-B TX", port);
request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-B status", port);
request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
"SCC-B RX", port);
request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-B special cond", port);
{
@ -341,13 +341,13 @@ static int bvme6000_scc_init(void)
port->datap = port->ctrlp + 4;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
"SCC-A TX", port);
request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-A status", port);
request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
"SCC-A RX", port);
request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-A special cond", port);
{
SCC_ACCESS_INIT(port);
@ -368,13 +368,13 @@ static int bvme6000_scc_init(void)
port->datap = port->ctrlp + 4;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
"SCC-B TX", port);
request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-B status", port);
request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
"SCC-B RX", port);
request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-B special cond", port);
{

2
drivers/char/watchdog/eurotechwdt.c
View File

@ -420,7 +420,7 @@ static int __init eurwdt_init(void)
goto out;
}
ret = request_irq(irq, eurwdt_interrupt, SA_INTERRUPT, "eurwdt", NULL);
ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL);
if(ret) {
printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
goto outmisc;

2
drivers/char/watchdog/mpcore_wdt.c
View File

@ -355,7 +355,7 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev)
goto err_misc;
}
ret = request_irq(wdt->irq, mpcore_wdt_fire, SA_INTERRUPT, "mpcore_wdt", wdt);
ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED, "mpcore_wdt", wdt);
if (ret) {
dev_printk(KERN_ERR, _dev, "cannot register IRQ%d for watchdog\n", wdt->irq);
goto err_irq;

2
drivers/char/watchdog/wdt.c
View File

@ -580,7 +580,7 @@ static int __init wdt_init(void)
goto out;
}
ret = request_irq(irq, wdt_interrupt, SA_INTERRUPT, "wdt501p", NULL);
ret = request_irq(irq, wdt_interrupt, IRQF_DISABLED, "wdt501p", NULL);
if(ret) {
printk(KERN_ERR "wdt: IRQ %d is not free.\n", irq);
goto outreg;

2
drivers/char/watchdog/wdt_pci.c
View File

@ -617,7 +617,7 @@ static int __devinit wdtpci_init_one (struct pci_dev *dev,
goto out_pci;
}
if (request_irq (irq, wdtpci_interrupt, SA_INTERRUPT | SA_SHIRQ,
if (request_irq (irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
"wdt_pci", &wdtpci_miscdev)) {
printk (KERN_ERR PFX "IRQ %d is not free\n", irq);
goto out_reg;