be2net: fixup TX-rate setting code for Skyhawk-R

Skyhawk-R FW supports TX-rate setting only as a % value of the link
speed, set via the SET_PROFILE_CONFIG cmd.

This patch makes the necessary changes to the FW cmd descriptors to support
the above change and also introduces checks in be_set_vf_tx_rate() to allow
only discrete values (that map to % of the link-speed).

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Ravikumar Nelavelli 2014-05-30 19:06:24 +05:30 committed by David S. Miller
parent a079488570
commit 0f77ba7353
3 changed files with 81 additions and 38 deletions

View File

@ -3562,33 +3562,47 @@ void be_reset_nic_desc(struct be_nic_res_desc *nic)
nic->cq_count = 0xFFFF;
nic->toe_conn_count = 0xFFFF;
nic->eq_count = 0xFFFF;
nic->iface_count = 0xFFFF;
nic->link_param = 0xFF;
nic->channel_id_param = cpu_to_le16(0xF000);
nic->acpi_params = 0xFF;
nic->wol_param = 0x0F;
nic->bw_min = 0xFFFFFFFF;
nic->tunnel_iface_count = 0xFFFF;
nic->direct_tenant_iface_count = 0xFFFF;
nic->bw_max = 0xFFFFFFFF;
}
int be_cmd_config_qos(struct be_adapter *adapter, u32 bps, u8 domain)
int be_cmd_config_qos(struct be_adapter *adapter, u32 max_rate, u16 link_speed,
u8 domain)
{
if (lancer_chip(adapter)) {
struct be_nic_res_desc nic_desc;
struct be_nic_res_desc nic_desc;
u32 bw_percent;
u16 version = 0;
be_reset_nic_desc(&nic_desc);
if (BE3_chip(adapter))
return be_cmd_set_qos(adapter, max_rate / 10, domain);
be_reset_nic_desc(&nic_desc);
nic_desc.pf_num = adapter->pf_number;
nic_desc.vf_num = domain;
if (lancer_chip(adapter)) {
nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V0;
nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V0;
nic_desc.flags = (1 << QUN_SHIFT) | (1 << IMM_SHIFT) |
(1 << NOSV_SHIFT);
nic_desc.pf_num = adapter->pf_number;
nic_desc.vf_num = domain;
nic_desc.bw_max = cpu_to_le32(bps);
return be_cmd_set_profile_config(adapter, &nic_desc,
RESOURCE_DESC_SIZE_V0,
0, domain);
nic_desc.bw_max = cpu_to_le32(max_rate / 10);
} else {
return be_cmd_set_qos(adapter, bps, domain);
version = 1;
nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V1;
nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V1;
nic_desc.flags = (1 << IMM_SHIFT) | (1 << NOSV_SHIFT);
bw_percent = max_rate ? (max_rate * 100) / link_speed : 100;
nic_desc.bw_max = cpu_to_le32(bw_percent);
}
return be_cmd_set_profile_config(adapter, &nic_desc,
nic_desc.hdr.desc_len,
version, domain);
}
int be_cmd_manage_iface(struct be_adapter *adapter, u32 iface, u8 op)

View File

@ -1891,16 +1891,20 @@ struct be_nic_res_desc {
u16 cq_count;
u16 toe_conn_count;
u16 eq_count;
u32 rsvd5;
u16 vlan_id;
u16 iface_count;
u32 cap_flags;
u8 link_param;
u8 rsvd6[3];
u8 rsvd6;
u16 channel_id_param;
u32 bw_min;
u32 bw_max;
u8 acpi_params;
u8 wol_param;
u16 rsvd7;
u32 rsvd8[7];
u16 tunnel_iface_count;
u16 direct_tenant_iface_count;
u32 rsvd8[6];
} __packed;
/************ Multi-Channel type ***********/
@ -2101,7 +2105,8 @@ int be_cmd_get_seeprom_data(struct be_adapter *adapter,
int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
u8 loopback_type, u8 enable);
int be_cmd_get_phy_info(struct be_adapter *adapter);
int be_cmd_config_qos(struct be_adapter *adapter, u32 bps, u8 domain);
int be_cmd_config_qos(struct be_adapter *adapter, u32 max_rate,
u16 link_speed, u8 domain);
void be_detect_error(struct be_adapter *adapter);
int be_cmd_get_die_temperature(struct be_adapter *adapter);
int be_cmd_get_cntl_attributes(struct be_adapter *adapter);

View File

@ -1352,7 +1352,10 @@ static int be_set_vf_tx_rate(struct net_device *netdev, int vf,
int min_tx_rate, int max_tx_rate)
{
struct be_adapter *adapter = netdev_priv(netdev);
int status = 0;
struct device *dev = &adapter->pdev->dev;
int percent_rate, status = 0;
u16 link_speed = 0;
u8 link_status;
if (!sriov_enabled(adapter))
return -EPERM;
@ -1363,18 +1366,47 @@ static int be_set_vf_tx_rate(struct net_device *netdev, int vf,
if (min_tx_rate)
return -EINVAL;
if (max_tx_rate < 100 || max_tx_rate > 10000) {
dev_err(&adapter->pdev->dev,
"max tx rate must be between 100 and 10000 Mbps\n");
return -EINVAL;
if (!max_tx_rate)
goto config_qos;
status = be_cmd_link_status_query(adapter, &link_speed,
&link_status, 0);
if (status)
goto err;
if (!link_status) {
dev_err(dev, "TX-rate setting not allowed when link is down\n");
status = -EPERM;
goto err;
}
status = be_cmd_config_qos(adapter, max_tx_rate / 10, vf + 1);
if (max_tx_rate < 100 || max_tx_rate > link_speed) {
dev_err(dev, "TX-rate must be between 100 and %d Mbps\n",
link_speed);
status = -EINVAL;
goto err;
}
/* On Skyhawk the QOS setting must be done only as a % value */
percent_rate = link_speed / 100;
if (skyhawk_chip(adapter) && (max_tx_rate % percent_rate)) {
dev_err(dev, "TX-rate must be a multiple of %d Mbps\n",
percent_rate);
status = -EINVAL;
goto err;
}
config_qos:
status = be_cmd_config_qos(adapter, max_tx_rate, link_speed, vf + 1);
if (status)
dev_err(&adapter->pdev->dev,
"max tx rate %d on VF %d failed\n", max_tx_rate, vf);
else
adapter->vf_cfg[vf].tx_rate = max_tx_rate;
goto err;
adapter->vf_cfg[vf].tx_rate = max_tx_rate;
return 0;
err:
dev_err(dev, "TX-rate setting of %dMbps on VF%d failed\n",
max_tx_rate, vf);
return status;
}
static int be_set_vf_link_state(struct net_device *netdev, int vf,
@ -3135,7 +3167,6 @@ static int be_vf_setup(struct be_adapter *adapter)
struct be_vf_cfg *vf_cfg;
int status, old_vfs, vf;
u32 privileges;
u16 lnk_speed;
old_vfs = pci_num_vf(adapter->pdev);
if (old_vfs) {
@ -3191,16 +3222,9 @@ static int be_vf_setup(struct be_adapter *adapter)
vf);
}
/* BE3 FW, by default, caps VF TX-rate to 100mbps.
* Allow full available bandwidth
*/
if (BE3_chip(adapter) && !old_vfs)
be_cmd_config_qos(adapter, 1000, vf + 1);
status = be_cmd_link_status_query(adapter, &lnk_speed,
NULL, vf + 1);
if (!status)
vf_cfg->tx_rate = lnk_speed;
/* Allow full available bandwidth */
if (!old_vfs)
be_cmd_config_qos(adapter, 0, 0, vf + 1);
if (!old_vfs) {
be_cmd_enable_vf(adapter, vf + 1);