mirror of https://gitee.com/openkylin/linux.git
dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema
Convert the EDT-FT5x06 to DT schema using json-schema. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200207084657.31195-1-benjamin.gaignard@st.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Benjamin Gaignard
Dmitry Torokhov
parent
cc5117d6e4
commit
10ad4845cd
|
|
@ -1,77 +0,0 @@
|
|||
FocalTech EDT-FT5x06 Polytouch driver
|
||||
=====================================
|
||||
|
||||
There are 5 variants of the chip for various touch panel sizes
|
||||
FT5206GE1 2.8" .. 3.8"
|
||||
FT5306DE4 4.3" .. 7"
|
||||
FT5406EE8 7" .. 8.9"
|
||||
FT5506EEG 7" .. 8.9"
|
||||
FT5726NEI 5.7” .. 11.6"
|
||||
|
||||
The software interface is identical for all those chips, so that
|
||||
currently there is no need for the driver to distinguish between the
|
||||
different chips. Nevertheless distinct compatible strings are used so
|
||||
that a distinction can be added if necessary without changing the DT
|
||||
bindings.
|
||||
|
||||
|
||||
Required properties:
|
||||
- compatible: "edt,edt-ft5206"
|
||||
or: "edt,edt-ft5306"
|
||||
or: "edt,edt-ft5406"
|
||||
or: "edt,edt-ft5506"
|
||||
or: "evervision,ev-ft5726"
|
||||
or: "focaltech,ft6236"
|
||||
|
||||
- reg: I2C slave address of the chip (0x38)
|
||||
- interrupts: interrupt specification for the touchdetect
|
||||
interrupt
|
||||
|
||||
Optional properties:
|
||||
- reset-gpios: GPIO specification for the RESET input
|
||||
- wake-gpios: GPIO specification for the WAKE input
|
||||
- vcc-supply: Regulator that supplies the touchscreen
|
||||
|
||||
- pinctrl-names: should be "default"
|
||||
- pinctrl-0: a phandle pointing to the pin settings for the
|
||||
control gpios
|
||||
|
||||
- wakeup-source: If present the device will act as wakeup-source
|
||||
|
||||
- threshold: allows setting the "click"-threshold in the range
|
||||
from 0 to 80.
|
||||
|
||||
- gain: allows setting the sensitivity in the range from 0 to
|
||||
31. Note that lower values indicate higher
|
||||
sensitivity.
|
||||
|
||||
- offset: allows setting the edge compensation in the range from
|
||||
0 to 31.
|
||||
|
||||
- offset-x: Same as offset, but applies only to the horizontal position.
|
||||
Range from 0 to 80, only supported by evervision,ev-ft5726
|
||||
devices.
|
||||
|
||||
- offset-y: Same as offset, but applies only to the vertical position.
|
||||
Range from 0 to 80, only supported by evervision,ev-ft5726
|
||||
devices.
|
||||
|
||||
- touchscreen-size-x : See touchscreen.txt
|
||||
- touchscreen-size-y : See touchscreen.txt
|
||||
- touchscreen-fuzz-x : See touchscreen.txt
|
||||
- touchscreen-fuzz-y : See touchscreen.txt
|
||||
- touchscreen-inverted-x : See touchscreen.txt
|
||||
- touchscreen-inverted-y : See touchscreen.txt
|
||||
- touchscreen-swapped-x-y : See touchscreen.txt
|
||||
|
||||
Example:
|
||||
polytouch: edt-ft5x06@38 {
|
||||
compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
|
||||
reg = <0x38>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&edt_ft5x06_pins>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
|
||||
reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
@ -0,0 +1,125 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: FocalTech EDT-FT5x06 Polytouch Bindings
|
||||
|
||||
description: |
|
||||
There are 5 variants of the chip for various touch panel sizes
|
||||
FT5206GE1 2.8" .. 3.8"
|
||||
FT5306DE4 4.3" .. 7"
|
||||
FT5406EE8 7" .. 8.9"
|
||||
FT5506EEG 7" .. 8.9"
|
||||
FT5726NEI 5.7” .. 11.6"
|
||||
|
||||
maintainers:
|
||||
- Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
||||
|
||||
allOf:
|
||||
- $ref: touchscreen.yaml#
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- evervision,ev-ft5726
|
||||
|
||||
then:
|
||||
properties:
|
||||
offset-x: true
|
||||
offset-y: true
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- edt,edt-ft5206
|
||||
- edt,edt-ft5306
|
||||
- edt,edt-ft5406
|
||||
- edt,edt-ft5506
|
||||
- evervision,ev-ft5726
|
||||
- focaltech,ft6236
|
||||
|
||||
reg:
|
||||
const: 0x38
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
wake-gpios:
|
||||
maxItems: 1
|
||||
|
||||
wakeup-source: true
|
||||
|
||||
vcc-supply:
|
||||
maxItems: 1
|
||||
|
||||
gain:
|
||||
description: Allows setting the sensitivity in the range from 0 to 31.
|
||||
Note that lower values indicate higher sensitivity.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- minimum: 0
|
||||
- maximum: 31
|
||||
|
||||
offset:
|
||||
description: Allows setting the edge compensation in the range from 0 to 31.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- minimum: 0
|
||||
- maximum: 31
|
||||
|
||||
offset-x:
|
||||
description: Same as offset, but applies only to the horizontal position.
|
||||
Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- minimum: 0
|
||||
- maximum: 80
|
||||
|
||||
offset-y:
|
||||
description: Same as offset, but applies only to the vertical position.
|
||||
Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- minimum: 0
|
||||
- maximum: 80
|
||||
|
||||
touchscreen-size-x: true
|
||||
touchscreen-size-y: true
|
||||
touchscreen-fuzz-x: true
|
||||
touchscreen-fuzz-y: true
|
||||
touchscreen-inverted-x: true
|
||||
touchscreen-inverted-y: true
|
||||
touchscreen-swapped-x-y: true
|
||||
interrupt-controller: true
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
i2c@00000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
edt-ft5x06@38 {
|
||||
compatible = "edt,edt-ft5406";
|
||||
reg = <0x38>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
|
||||
reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
Loading…
Reference in New Issue