PCI updates for v4.6:

VPD
     Add pci_set_vpd_size() (Hariprasad Shenai)
     cxgb4: Set VPD size so we can read both VPD structures (Hariprasad Shenai)
 
   Freescale i.MX6 host bridge driver
     Revert "PCI: imx6: Add support for active-low reset GPIO" (Fabio Estevam)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXFXQVAAoJEFmIoMA60/r8UdgQAL986rapG6wG0ZC63BnMs/vl
 SHYM8prWKBDCGFJ2VPdBMWzcGYnZ+M++G8p7Ys5DLjZzEa2BV/LieyqX15HfKn8P
 d9VlLExTfMyb7O0FMgmZQMYfwtEoXorYwqP6JcJAGg/+CoinNj60dT4SvN8q+XdT
 sr5yNeTVNYHpFWOYDs0Ep2XgRLoE4Sd7NnwJISFL56ZrkpgGy5tZteD+iN8/0ZVN
 cMDZmkBZmN+8iHiS/3Rq7/woTpR+o2o57Wdw4Hsm6QoS177MoExB+foT+cQMB2CS
 U/YqvUElXpwPFOgficw/VEPtkCsKmwerN3FUpXKCXQobxkH+p8p5XYBtNRoeuiQS
 Bm+ijgAoLJNE5lnG1ibj5ENs55bOHnJa81mLWdht8V8R1CUd9zgdUb8F04GYiA4e
 OFEZ/4pKh/7+8w1gtF/NozWGxvgK3QBCT0avN7FI9zkJRe3b0i8FvPcjIYYXtLcw
 spNM+7nLQI9DEF3Kkve7DdIlMaZMO/zdNNuOkJQdLfVLt/8Spn01Vua1GC28Kf6C
 WGAOVmA30PuiLvrF5mNnNpKKp5SlLOq/hPgx6PBRIgDqzH7ekJi7LYPzP3ibrdaY
 70Rm5phJ9Mmpq+NpgLjC+Gc+3C2uAI8CGvtsKEkC7xfZncBk6w/lAFFvdm1zgJFH
 2GnNhL5+nSKrty5GvAP0
 =oW8E
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
 "These are fixes for two issues:

   - The VPD parsing code we added for v4.6 keeps some devices from
     crashing, but also keeps cxgb4 from reading non-standard extra VPD
     data that is relies on.  Hariprasad added a way for the driver to
     specify how much VPD is valid.

   - The i.MX6 active-low reset GPIO support we added in v4.5 caused
     regressions on some boards, so we're reverting that.

  VPD:
    Add pci_set_vpd_size() (Hariprasad Shenai)
    cxgb4: Set VPD size so we can read both VPD structures (Hariprasad Shenai)

  Freescale i.MX6 host bridge driver:
    Revert "PCI: imx6: Add support for active-low reset GPIO" (Fabio Estevam)"

* tag 'pci-v4.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  cxgb4: Set VPD size so we can read both VPD structures
  PCI: Add pci_set_vpd_size() to set VPD size
  Revert "PCI: imx6: Add support for active-low reset GPIO"

drivers/net/ethernet/chelsio/cxgb4/t4_hw.c

@@ -2557,6 +2557,7 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
 }
 
 #define EEPROM_STAT_ADDR   0x7bfc
+#define VPD_SIZE           0x800
 #define VPD_BASE           0x400
 #define VPD_BASE_OLD       0
 #define VPD_LEN            1024
@@ -2594,6 +2595,15 @@ int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	if (!vpd)
 		return -ENOMEM;
 
+	/* We have two VPD data structures stored in the adapter VPD area.
+	 * By default, Linux calculates the size of the VPD area by traversing
+	 * the first VPD area at offset 0x0, so we need to tell the OS what
+	 * our real VPD size is.
+	 */
+	ret = pci_set_vpd_size(adapter->pdev, VPD_SIZE);
+	if (ret < 0)
+		goto out;
+
 	/* Card information normally starts at VPD_BASE but early cards had
 	 * it at 0.
 	 */

drivers/pci/access.c

@@ -275,6 +275,19 @@ ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void
 }
 EXPORT_SYMBOL(pci_write_vpd);
 
+/**
+ * pci_set_vpd_size - Set size of Vital Product Data space
+ * @dev:	pci device struct
+ * @len:	size of vpd space
+ */
+int pci_set_vpd_size(struct pci_dev *dev, size_t len)
+{
+	if (!dev->vpd || !dev->vpd->ops)
+		return -ENODEV;
+	return dev->vpd->ops->set_size(dev, len);
+}
+EXPORT_SYMBOL(pci_set_vpd_size);
+
 #define PCI_VPD_MAX_SIZE (PCI_VPD_ADDR_MASK + 1)
 
 /**
@@ -498,9 +511,23 @@ static ssize_t pci_vpd_write(struct pci_dev *dev, loff_t pos, size_t count,
 	return ret ? ret : count;
 }
 
+static int pci_vpd_set_size(struct pci_dev *dev, size_t len)
+{
+	struct pci_vpd *vpd = dev->vpd;
+
+	if (len == 0 || len > PCI_VPD_MAX_SIZE)
+		return -EIO;
+
+	vpd->valid = 1;
+	vpd->len = len;
+
+	return 0;
+}
+
 static const struct pci_vpd_ops pci_vpd_ops = {
 	.read = pci_vpd_read,
 	.write = pci_vpd_write,
+	.set_size = pci_vpd_set_size,
 };
 
 static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count,
@@ -533,9 +560,24 @@ static ssize_t pci_vpd_f0_write(struct pci_dev *dev, loff_t pos, size_t count,
 	return ret;
 }
 
+static int pci_vpd_f0_set_size(struct pci_dev *dev, size_t len)
+{
+	struct pci_dev *tdev = pci_get_slot(dev->bus,
+					    PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+	int ret;
+
+	if (!tdev)
+		return -ENODEV;
+
+	ret = pci_set_vpd_size(tdev, len);
+	pci_dev_put(tdev);
+	return ret;
+}
+
 static const struct pci_vpd_ops pci_vpd_f0_ops = {
 	.read = pci_vpd_f0_read,
 	.write = pci_vpd_f0_write,
+	.set_size = pci_vpd_f0_set_size,
 };
 
 int pci_vpd_init(struct pci_dev *dev)

drivers/pci/host/pci-imx6.c

@@ -32,7 +32,7 @@
 #define to_imx6_pcie(x)	container_of(x, struct imx6_pcie, pp)
 
 struct imx6_pcie {
-	struct gpio_desc	*reset_gpio;
+	int			reset_gpio;
 	struct clk		*pcie_bus;
 	struct clk		*pcie_phy;
 	struct clk		*pcie;
@@ -309,10 +309,10 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
 	usleep_range(200, 500);
 
 	/* Some boards don't have PCIe reset GPIO. */
-	if (imx6_pcie->reset_gpio) {
-		gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 0);
+	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+		gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0);
 		msleep(100);
-		gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 1);
+		gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1);
 	}
 	return 0;
 
@@ -523,6 +523,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
 {
 	struct imx6_pcie *imx6_pcie;
 	struct pcie_port *pp;
+	struct device_node *np = pdev->dev.of_node;
 	struct resource *dbi_base;
 	struct device_node *node = pdev->dev.of_node;
 	int ret;
@@ -544,8 +545,15 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
 		return PTR_ERR(pp->dbi_base);
 
 	/* Fetch GPIOs */
-	imx6_pcie->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset",
-							GPIOD_OUT_LOW);
+	imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
+	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+		ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio,
+					    GPIOF_OUT_INIT_LOW, "PCIe reset");
+		if (ret) {
+			dev_err(&pdev->dev, "unable to get reset gpio\n");
+			return ret;
+		}
+	}
 
 	/* Fetch clocks */
 	imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");

drivers/pci/pci.h

@@ -97,6 +97,7 @@ static inline bool pci_has_subordinate(struct pci_dev *pci_dev)
 struct pci_vpd_ops {
 	ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
 	ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
+	int (*set_size)(struct pci_dev *dev, size_t len);
 };
 
 struct pci_vpd {

include/linux/pci.h

@@ -1111,6 +1111,7 @@ void pci_unlock_rescan_remove(void);
 /* Vital product data routines */
 ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
 ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
+int pci_set_vpd_size(struct pci_dev *dev, size_t len);
 
 /* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */
 resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx);