mirror of https://gitee.com/openkylin/linux.git
dt-bindings: firmware: arm,scpi: Convert to json schema
Convert the old text format binding for System Control and Power Interface (SCPI) Message Protocol into the new and shiny YAML format. Cc: Rob Herring <robh+dt@kernel.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20210604205710.1944363-3-sudeep.holla@arm.com [robh: Move fixed strings to 'properties', drop some literal block notations] Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Sudeep Holla
Rob Herring
parent
e837220a27
commit
1496be7194
|
|
@ -1,204 +0,0 @@
|
|||
System Control and Power Interface (SCPI) Message Protocol
|
||||
----------------------------------------------------------
|
||||
|
||||
Firmware implementing the SCPI described in ARM document number ARM DUI 0922B
|
||||
("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be used
|
||||
by Linux to initiate various system control and power operations.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be
|
||||
* "arm,scpi" : For implementations complying to SCPI v1.0 or above
|
||||
* "arm,scpi-pre-1.0" : For implementations complying to all
|
||||
unversioned releases prior to SCPI v1.0
|
||||
- mboxes: List of phandle and mailbox channel specifiers
|
||||
All the channels reserved by remote SCP firmware for use by
|
||||
SCPI message protocol should be specified in any order
|
||||
- shmem : List of phandle pointing to the shared memory(SHM) area between the
|
||||
processors using these mailboxes for IPC, one for each mailbox
|
||||
SHM can be any memory reserved for the purpose of this communication
|
||||
between the processors.
|
||||
|
||||
See Documentation/devicetree/bindings/mailbox/mailbox.txt
|
||||
for more details about the generic mailbox controller and
|
||||
client driver bindings.
|
||||
|
||||
Clock bindings for the clocks based on SCPI Message Protocol
|
||||
------------------------------------------------------------
|
||||
|
||||
This binding uses the common clock binding[1].
|
||||
|
||||
Container Node
|
||||
==============
|
||||
Required properties:
|
||||
- compatible : should be "arm,scpi-clocks"
|
||||
All the clocks provided by SCP firmware via SCPI message
|
||||
protocol much be listed as sub-nodes under this node.
|
||||
|
||||
Sub-nodes
|
||||
=========
|
||||
Required properties:
|
||||
- compatible : shall include one of the following
|
||||
"arm,scpi-dvfs-clocks" - all the clocks that are variable and index based.
|
||||
These clocks don't provide an entire range of values between the
|
||||
limits but only discrete points within the range. The firmware
|
||||
provides the mapping for each such operating frequency and the
|
||||
index associated with it. The firmware also manages the
|
||||
voltage scaling appropriately with the clock scaling.
|
||||
"arm,scpi-variable-clocks" - all the clocks that are variable and provide full
|
||||
range within the specified range. The firmware provides the
|
||||
range of values within a specified range.
|
||||
|
||||
Other required properties for all clocks(all from common clock binding):
|
||||
- #clock-cells : Should be 1. Contains the Clock ID value used by SCPI commands.
|
||||
- clock-output-names : shall be the corresponding names of the outputs.
|
||||
- clock-indices: The identifying number for the clocks(i.e.clock_id) in the
|
||||
node. It can be non linear and hence provide the mapping of identifiers
|
||||
into the clock-output-names array.
|
||||
|
||||
Sensor bindings for the sensors based on SCPI Message Protocol
|
||||
--------------------------------------------------------------
|
||||
SCPI provides an API to access the various sensors on the SoC.
|
||||
|
||||
Required properties:
|
||||
- compatible : should be "arm,scpi-sensors".
|
||||
- #thermal-sensor-cells: should be set to 1. This property follows the
|
||||
thermal device tree bindings[2].
|
||||
|
||||
Valid cell values are raw identifiers (Sensor ID)
|
||||
as used by the firmware. Refer to platform details
|
||||
for your implementation for the IDs to use.
|
||||
|
||||
Power domain bindings for the power domains based on SCPI Message Protocol
|
||||
------------------------------------------------------------
|
||||
|
||||
This binding uses the generic power domain binding[4].
|
||||
|
||||
PM domain providers
|
||||
===================
|
||||
|
||||
Required properties:
|
||||
- #power-domain-cells : Should be 1. Contains the device or the power
|
||||
domain ID value used by SCPI commands.
|
||||
- num-domains: Total number of power domains provided by SCPI. This is
|
||||
needed as the SCPI message protocol lacks a mechanism to
|
||||
query this information at runtime.
|
||||
|
||||
PM domain consumers
|
||||
===================
|
||||
|
||||
Required properties:
|
||||
- power-domains : A phandle and PM domain specifier as defined by bindings of
|
||||
the power controller specified by phandle.
|
||||
|
||||
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
|
||||
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
[2] Documentation/devicetree/bindings/thermal/thermal*.yaml
|
||||
[3] Documentation/devicetree/bindings/sram/sram.yaml
|
||||
[4] Documentation/devicetree/bindings/power/power-domain.yaml
|
||||
|
||||
Example:
|
||||
|
||||
sram: sram@50000000 {
|
||||
compatible = "arm,juno-sram-ns", "mmio-sram";
|
||||
reg = <0x0 0x50000000 0x0 0x10000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x0 0x50000000 0x10000>;
|
||||
|
||||
cpu_scp_lpri: scp-shmem@0 {
|
||||
compatible = "arm,juno-scp-shmem";
|
||||
reg = <0x0 0x200>;
|
||||
};
|
||||
|
||||
cpu_scp_hpri: scp-shmem@200 {
|
||||
compatible = "arm,juno-scp-shmem";
|
||||
reg = <0x200 0x200>;
|
||||
};
|
||||
};
|
||||
|
||||
mailbox: mailbox0@40000000 {
|
||||
....
|
||||
#mbox-cells = <1>;
|
||||
};
|
||||
|
||||
scpi_protocol: scpi@2e000000 {
|
||||
compatible = "arm,scpi";
|
||||
mboxes = <&mailbox 0 &mailbox 1>;
|
||||
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
|
||||
|
||||
clocks {
|
||||
compatible = "arm,scpi-clocks";
|
||||
|
||||
scpi_dvfs: scpi_clocks@0 {
|
||||
compatible = "arm,scpi-dvfs-clocks";
|
||||
#clock-cells = <1>;
|
||||
clock-indices = <0>, <1>, <2>;
|
||||
clock-output-names = "atlclk", "aplclk","gpuclk";
|
||||
};
|
||||
scpi_clk: scpi_clocks@3 {
|
||||
compatible = "arm,scpi-variable-clocks";
|
||||
#clock-cells = <1>;
|
||||
clock-indices = <3>, <4>;
|
||||
clock-output-names = "pxlclk0", "pxlclk1";
|
||||
};
|
||||
};
|
||||
|
||||
scpi_sensors0: sensors {
|
||||
compatible = "arm,scpi-sensors";
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
|
||||
scpi_devpd: scpi-power-domains {
|
||||
compatible = "arm,scpi-power-domains";
|
||||
num-domains = <2>;
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
cpu@0 {
|
||||
...
|
||||
reg = <0 0>;
|
||||
clocks = <&scpi_dvfs 0>;
|
||||
};
|
||||
|
||||
hdlcd@7ff60000 {
|
||||
...
|
||||
reg = <0 0x7ff60000 0 0x1000>;
|
||||
clocks = <&scpi_clk 4>;
|
||||
power-domains = <&scpi_devpd 1>;
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
soc_thermal {
|
||||
polling-delay-passive = <100>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
/* sensor ID */
|
||||
thermal-sensors = <&scpi_sensors0 3>;
|
||||
...
|
||||
};
|
||||
};
|
||||
|
||||
In the above example, the #clock-cells is set to 1 as required.
|
||||
scpi_dvfs has 3 output clocks namely: atlclk, aplclk, and gpuclk with 0,
|
||||
1 and 2 as clock-indices. scpi_clk has 2 output clocks namely: pxlclk0
|
||||
and pxlclk1 with 3 and 4 as clock-indices.
|
||||
|
||||
The first consumer in the example is cpu@0 and it has '0' as the clock
|
||||
specifier which points to the first entry in the output clocks of
|
||||
scpi_dvfs i.e. "atlclk".
|
||||
|
||||
Similarly the second example is hdlcd@7ff60000 and it has pxlclk1 as input
|
||||
clock. '4' in the clock specifier here points to the second entry
|
||||
in the output clocks of scpi_clocks i.e. "pxlclk1"
|
||||
|
||||
The thermal-sensors property in the soc_thermal node uses the
|
||||
temperature sensor provided by SCP firmware to setup a thermal
|
||||
zone. The ID "3" is the sensor identifier for the temperature sensor
|
||||
as used by the firmware.
|
||||
|
||||
The num-domains property in scpi-power-domains domain specifies that
|
||||
SCPI provides 2 power domains. The hdlcd node uses the power domain with
|
||||
domain ID 1.
|
||||
|
|
@ -0,0 +1,225 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
# Copyright 2021 ARM Ltd.
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/firmware/arm,scpi.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: System Control and Power Interface (SCPI) Message Protocol bindings
|
||||
|
||||
maintainers:
|
||||
- Sudeep Holla <sudeep.holla@arm.com>
|
||||
|
||||
description: |
|
||||
Firmware implementing the SCPI described in ARM document number ARM DUI
|
||||
0922B ("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be
|
||||
used by Linux to initiate various system control and power operations.
|
||||
|
||||
This binding is intended to define the interface the firmware implementing
|
||||
the SCPI provide for OSPM in the device tree.
|
||||
|
||||
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
const: scpi
|
||||
|
||||
compatible:
|
||||
description:
|
||||
SCPI compliant firmware complying to SCPI v1.0 and above OR
|
||||
SCPI compliant firmware complying to all unversioned releases
|
||||
prior to SCPI v1.0
|
||||
oneOf:
|
||||
- const: arm,scpi # SCPI v1.0 and above
|
||||
- const: arm,scpi-pre-1.0 # Unversioned SCPI before v1.0
|
||||
|
||||
mboxes:
|
||||
description:
|
||||
List of phandle and mailbox channel specifiers. All the channels reserved
|
||||
by remote SCP firmware for use by SCPI message protocol should be
|
||||
specified in any order.
|
||||
minItems: 1
|
||||
|
||||
shmem:
|
||||
description:
|
||||
List of phandle pointing to the shared memory(SHM) area between the
|
||||
processors using these mailboxes for IPC, one for each mailbox SHM can
|
||||
be any memory reserved for the purpose of this communication between the
|
||||
processors.
|
||||
minItems: 1
|
||||
|
||||
power-controller:
|
||||
type: object
|
||||
description:
|
||||
This sub-node represents SCPI power domain controller.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: arm,scpi-power-domains
|
||||
|
||||
'#power-domain-cells':
|
||||
const: 1
|
||||
|
||||
num-domains:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
Total number of power domains provided by SCPI. This is needed as
|
||||
the SCPI message protocol lacks a mechanism to query this
|
||||
information at runtime.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- '#power-domain-cells'
|
||||
- num-domains
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
sensors:
|
||||
type: object
|
||||
description: |
|
||||
This sub-node represents SCPI sensors controller.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: arm,scpi-sensors
|
||||
|
||||
'#thermal-sensor-cells':
|
||||
const: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- '#thermal-sensor-cells'
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
clocks:
|
||||
type: object
|
||||
description:
|
||||
This is the container node. Each sub-node represents one of the types
|
||||
of clock controller - indexed or full range.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: arm,scpi-clocks
|
||||
|
||||
patternProperties:
|
||||
"^clocks-[0-9a-f]+$":
|
||||
type: object
|
||||
description: |
|
||||
This sub-node represents one of the types of clock controller
|
||||
- indexed or full range.
|
||||
|
||||
"arm,scpi-dvfs-clocks" - all the clocks that are variable and index
|
||||
based. These clocks don't provide an entire range of values between
|
||||
the limits but only discrete points within the range. The firmware
|
||||
provides the mapping for each such operating frequency and the index
|
||||
associated with it. The firmware also manages the voltage scaling
|
||||
appropriately with the clock scaling.
|
||||
|
||||
"arm,scpi-variable-clocks" - all the clocks that are variable and
|
||||
provide full range within the specified range. The firmware provides
|
||||
the range of values within a specified range.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: arm,scpi-dvfs-clocks
|
||||
- const: arm,scpi-variable-clocks
|
||||
|
||||
'#clock-cells':
|
||||
const: 1
|
||||
|
||||
clock-output-names: true
|
||||
|
||||
clock-indices:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
description:
|
||||
The identifying number for the clocks(i.e.clock_id) in the node.
|
||||
It can be non linear and hence provide the mapping of identifiers
|
||||
into the clock-output-names array.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- '#clock-cells'
|
||||
- clock-output-names
|
||||
- clock-indices
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- mboxes
|
||||
- shmem
|
||||
|
||||
examples:
|
||||
- |
|
||||
firmware {
|
||||
scpi {
|
||||
compatible = "arm,scpi";
|
||||
mboxes = <&mhuA 1>;
|
||||
shmem = <&cpu_scp_hpri>; /* HP-NonSecure */
|
||||
|
||||
scpi_devpd: power-controller {
|
||||
compatible = "arm,scpi-power-domains";
|
||||
num-domains = <2>;
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
compatible = "arm,scpi-clocks";
|
||||
|
||||
scpi_dvfs: clocks-0 {
|
||||
compatible = "arm,scpi-dvfs-clocks";
|
||||
#clock-cells = <1>;
|
||||
clock-indices = <0>, <1>, <2>;
|
||||
clock-output-names = "atlclk", "aplclk","gpuclk";
|
||||
};
|
||||
|
||||
scpi_clk: clocks-1 {
|
||||
compatible = "arm,scpi-variable-clocks";
|
||||
#clock-cells = <1>;
|
||||
clock-indices = <3>, <4>;
|
||||
clock-output-names = "pxlclk0", "pxlclk1";
|
||||
};
|
||||
};
|
||||
|
||||
scpi_sensors: sensors {
|
||||
compatible = "arm,scpi-sensors";
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
sram@50000000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x0 0x50000000 0x0 0x10000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x0 0x50000000 0x10000>;
|
||||
|
||||
cpu_scp_lpri: scp-sram-section@0 {
|
||||
compatible = "arm,scp-shmem";
|
||||
reg = <0x0 0x200>;
|
||||
};
|
||||
|
||||
cpu_scp_hpri: scp-sram-section@200 {
|
||||
compatible = "arm,scp-shmem";
|
||||
reg = <0x200 0x200>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -17696,7 +17696,7 @@ M: Sudeep Holla <sudeep.holla@arm.com>
|
|||
R: Cristian Marussi <cristian.marussi@arm.com>
|
||||
L: linux-arm-kernel@lists.infradead.org
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/arm/arm,sc[mp]i.txt
|
||||
F: Documentation/devicetree/bindings/firmware/arm,sc[mp]i.yaml
|
||||
F: drivers/clk/clk-sc[mp]i.c
|
||||
F: drivers/cpufreq/sc[mp]i-cpufreq.c
|
||||
F: drivers/firmware/arm_scmi/
|
||||
|
|
|
|||
Loading…
Reference in New Issue