mirror of https://gitee.com/openkylin/linux.git
mfd: add U300 AB3100 core support
This adds a core driver for the AB3100 mixed-signal circuit found in the ST-Ericsson U300 series platforms. This driver is a singleton proxy for all accesses to the AB3100 sub-drivers which will be merged on top of this one, RTC, regulators, battery and system power control, vibrator, LEDs, and an ALSA codec. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mike Rapoport <mike@compulab.co.il> Reviewed-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Linus Walleij
Samuel Ortiz
parent
516eca2726
commit
14fa56917d
|
|
@ -241,6 +241,20 @@ config PCF50633_GPIO
|
||||||
Say yes here if you want to include support GPIO for pins on
|
Say yes here if you want to include support GPIO for pins on
|
||||||
the PCF50633 chip.
|
the PCF50633 chip.
|
||||||
|
|
||||||
|
config AB3100_CORE
|
||||||
|
tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
|
||||||
|
depends on I2C
|
||||||
|
default y if ARCH_U300
|
||||||
|
help
|
||||||
|
Select this to enable the AB3100 Mixed Signal IC core
|
||||||
|
functionality. This connects to a AB3100 on the I2C bus
|
||||||
|
and expose a number of symbols needed for dependent devices
|
||||||
|
to read and write registers and subscribe to events from
|
||||||
|
this multi-functional IC. This is needed to use other features
|
||||||
|
of the AB3100 such as battery-backed RTC, charging control,
|
||||||
|
LEDs, vibrator, system power and temperature, power management
|
||||||
|
and ALSA sound.
|
||||||
|
|
||||||
endmenu
|
endmenu
|
||||||
|
|
||||||
menu "Multimedia Capabilities Port drivers"
|
menu "Multimedia Capabilities Port drivers"
|
||||||
|
|
|
||||||
|
|
@ -40,4 +40,5 @@ obj-$(CONFIG_PMIC_DA903X) += da903x.o
|
||||||
|
|
||||||
obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o
|
obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o
|
||||||
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
|
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
|
||||||
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
|
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
|
||||||
|
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,991 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2007-2009 ST-Ericsson
|
||||||
|
* License terms: GNU General Public License (GPL) version 2
|
||||||
|
* Low-level core for exclusive access to the AB3100 IC on the I2C bus
|
||||||
|
* and some basic chip-configuration.
|
||||||
|
* Author: Linus Walleij <linus.walleij@stericsson.com>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/i2c.h>
|
||||||
|
#include <linux/mutex.h>
|
||||||
|
#include <linux/list.h>
|
||||||
|
#include <linux/notifier.h>
|
||||||
|
#include <linux/err.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
#include <linux/device.h>
|
||||||
|
#include <linux/interrupt.h>
|
||||||
|
#include <linux/workqueue.h>
|
||||||
|
#include <linux/debugfs.h>
|
||||||
|
#include <linux/seq_file.h>
|
||||||
|
#include <linux/uaccess.h>
|
||||||
|
#include <linux/mfd/ab3100.h>
|
||||||
|
|
||||||
|
/* These are the only registers inside AB3100 used in this main file */
|
||||||
|
|
||||||
|
/* Interrupt event registers */
|
||||||
|
#define AB3100_EVENTA1 0x21
|
||||||
|
#define AB3100_EVENTA2 0x22
|
||||||
|
#define AB3100_EVENTA3 0x23
|
||||||
|
|
||||||
|
/* AB3100 DAC converter registers */
|
||||||
|
#define AB3100_DIS 0x00
|
||||||
|
#define AB3100_D0C 0x01
|
||||||
|
#define AB3100_D1C 0x02
|
||||||
|
#define AB3100_D2C 0x03
|
||||||
|
#define AB3100_D3C 0x04
|
||||||
|
|
||||||
|
/* Chip ID register */
|
||||||
|
#define AB3100_CID 0x20
|
||||||
|
|
||||||
|
/* AB3100 interrupt registers */
|
||||||
|
#define AB3100_IMRA1 0x24
|
||||||
|
#define AB3100_IMRA2 0x25
|
||||||
|
#define AB3100_IMRA3 0x26
|
||||||
|
#define AB3100_IMRB1 0x2B
|
||||||
|
#define AB3100_IMRB2 0x2C
|
||||||
|
#define AB3100_IMRB3 0x2D
|
||||||
|
|
||||||
|
/* System Power Monitoring and control registers */
|
||||||
|
#define AB3100_MCA 0x2E
|
||||||
|
#define AB3100_MCB 0x2F
|
||||||
|
|
||||||
|
/* SIM power up */
|
||||||
|
#define AB3100_SUP 0x50
|
||||||
|
|
||||||
|
/*
|
||||||
|
* I2C communication
|
||||||
|
*
|
||||||
|
* The AB3100 is usually assigned address 0x48 (7-bit)
|
||||||
|
* The chip is defined in the platform i2c_board_data section.
|
||||||
|
*/
|
||||||
|
static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
|
||||||
|
I2C_CLIENT_INSMOD_1(ab3100);
|
||||||
|
|
||||||
|
u8 ab3100_get_chip_type(struct ab3100 *ab3100)
|
||||||
|
{
|
||||||
|
u8 chip = ABUNKNOWN;
|
||||||
|
|
||||||
|
switch (ab3100->chip_id & 0xf0) {
|
||||||
|
case 0xa0:
|
||||||
|
chip = AB3000;
|
||||||
|
break;
|
||||||
|
case 0xc0:
|
||||||
|
chip = AB3100;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return chip;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(ab3100_get_chip_type);
|
||||||
|
|
||||||
|
int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
|
||||||
|
{
|
||||||
|
u8 regandval[2] = {reg, regval};
|
||||||
|
int err;
|
||||||
|
|
||||||
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
||||||
|
if (err)
|
||||||
|
return err;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* A two-byte write message with the first byte containing the register
|
||||||
|
* number and the second byte containing the value to be written
|
||||||
|
* effectively sets a register in the AB3100.
|
||||||
|
*/
|
||||||
|
err = i2c_master_send(ab3100->i2c_client, regandval, 2);
|
||||||
|
if (err < 0) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (write register): %d\n",
|
||||||
|
err);
|
||||||
|
} else if (err != 2) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (write register) "
|
||||||
|
"%d bytes transferred (expected 2)\n",
|
||||||
|
err);
|
||||||
|
err = -EIO;
|
||||||
|
} else {
|
||||||
|
/* All is well */
|
||||||
|
err = 0;
|
||||||
|
}
|
||||||
|
mutex_unlock(&ab3100->access_mutex);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(ab3100_set_register);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The test registers exist at an I2C bus address up one
|
||||||
|
* from the ordinary base. They are not supposed to be used
|
||||||
|
* in production code, but sometimes you have to do that
|
||||||
|
* anyway. It's currently only used from this file so declare
|
||||||
|
* it static and do not export.
|
||||||
|
*/
|
||||||
|
static int ab3100_set_test_register(struct ab3100 *ab3100,
|
||||||
|
u8 reg, u8 regval)
|
||||||
|
{
|
||||||
|
u8 regandval[2] = {reg, regval};
|
||||||
|
int err;
|
||||||
|
|
||||||
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
||||||
|
if (err)
|
||||||
|
return err;
|
||||||
|
|
||||||
|
err = i2c_master_send(ab3100->testreg_client, regandval, 2);
|
||||||
|
if (err < 0) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (write test register): %d\n",
|
||||||
|
err);
|
||||||
|
} else if (err != 2) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (write test register) "
|
||||||
|
"%d bytes transferred (expected 2)\n",
|
||||||
|
err);
|
||||||
|
err = -EIO;
|
||||||
|
} else {
|
||||||
|
/* All is well */
|
||||||
|
err = 0;
|
||||||
|
}
|
||||||
|
mutex_unlock(&ab3100->access_mutex);
|
||||||
|
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
|
||||||
|
{
|
||||||
|
int err;
|
||||||
|
|
||||||
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
||||||
|
if (err)
|
||||||
|
return err;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* AB3100 require an I2C "stop" command between each message, else
|
||||||
|
* it will not work. The only way of achieveing this with the
|
||||||
|
* message transport layer is to send the read and write messages
|
||||||
|
* separately.
|
||||||
|
*/
|
||||||
|
err = i2c_master_send(ab3100->i2c_client, ®, 1);
|
||||||
|
if (err < 0) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (send register address): %d\n",
|
||||||
|
err);
|
||||||
|
goto get_reg_out_unlock;
|
||||||
|
} else if (err != 1) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (send register address) "
|
||||||
|
"%d bytes transferred (expected 1)\n",
|
||||||
|
err);
|
||||||
|
err = -EIO;
|
||||||
|
goto get_reg_out_unlock;
|
||||||
|
} else {
|
||||||
|
/* All is well */
|
||||||
|
err = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
err = i2c_master_recv(ab3100->i2c_client, regval, 1);
|
||||||
|
if (err < 0) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (read register): %d\n",
|
||||||
|
err);
|
||||||
|
goto get_reg_out_unlock;
|
||||||
|
} else if (err != 1) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (read register) "
|
||||||
|
"%d bytes transferred (expected 1)\n",
|
||||||
|
err);
|
||||||
|
err = -EIO;
|
||||||
|
goto get_reg_out_unlock;
|
||||||
|
} else {
|
||||||
|
/* All is well */
|
||||||
|
err = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
get_reg_out_unlock:
|
||||||
|
mutex_unlock(&ab3100->access_mutex);
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(ab3100_get_register);
|
||||||
|
|
||||||
|
int ab3100_get_register_page(struct ab3100 *ab3100,
|
||||||
|
u8 first_reg, u8 *regvals, u8 numregs)
|
||||||
|
{
|
||||||
|
int err;
|
||||||
|
|
||||||
|
if (ab3100->chip_id == 0xa0 ||
|
||||||
|
ab3100->chip_id == 0xa1)
|
||||||
|
/* These don't support paged reads */
|
||||||
|
return -EIO;
|
||||||
|
|
||||||
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
||||||
|
if (err)
|
||||||
|
return err;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Paged read also require an I2C "stop" command.
|
||||||
|
*/
|
||||||
|
err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
|
||||||
|
if (err < 0) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (send first register address): %d\n",
|
||||||
|
err);
|
||||||
|
goto get_reg_page_out_unlock;
|
||||||
|
} else if (err != 1) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (send first register address) "
|
||||||
|
"%d bytes transferred (expected 1)\n",
|
||||||
|
err);
|
||||||
|
err = -EIO;
|
||||||
|
goto get_reg_page_out_unlock;
|
||||||
|
}
|
||||||
|
|
||||||
|
err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
|
||||||
|
if (err < 0) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (read register page): %d\n",
|
||||||
|
err);
|
||||||
|
goto get_reg_page_out_unlock;
|
||||||
|
} else if (err != numregs) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (read register page) "
|
||||||
|
"%d bytes transferred (expected %d)\n",
|
||||||
|
err, numregs);
|
||||||
|
err = -EIO;
|
||||||
|
goto get_reg_page_out_unlock;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* All is well */
|
||||||
|
err = 0;
|
||||||
|
|
||||||
|
get_reg_page_out_unlock:
|
||||||
|
mutex_unlock(&ab3100->access_mutex);
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(ab3100_get_register_page);
|
||||||
|
|
||||||
|
int ab3100_mask_and_set_register(struct ab3100 *ab3100,
|
||||||
|
u8 reg, u8 andmask, u8 ormask)
|
||||||
|
{
|
||||||
|
u8 regandval[2] = {reg, 0};
|
||||||
|
int err;
|
||||||
|
|
||||||
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
||||||
|
if (err)
|
||||||
|
return err;
|
||||||
|
|
||||||
|
/* First read out the target register */
|
||||||
|
err = i2c_master_send(ab3100->i2c_client, ®, 1);
|
||||||
|
if (err < 0) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (maskset send address): %d\n",
|
||||||
|
err);
|
||||||
|
goto get_maskset_unlock;
|
||||||
|
} else if (err != 1) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (maskset send address) "
|
||||||
|
"%d bytes transferred (expected 1)\n",
|
||||||
|
err);
|
||||||
|
err = -EIO;
|
||||||
|
goto get_maskset_unlock;
|
||||||
|
}
|
||||||
|
|
||||||
|
err = i2c_master_recv(ab3100->i2c_client, ®andval[1], 1);
|
||||||
|
if (err < 0) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (maskset read register): %d\n",
|
||||||
|
err);
|
||||||
|
goto get_maskset_unlock;
|
||||||
|
} else if (err != 1) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (maskset read register) "
|
||||||
|
"%d bytes transferred (expected 1)\n",
|
||||||
|
err);
|
||||||
|
err = -EIO;
|
||||||
|
goto get_maskset_unlock;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Modify the register */
|
||||||
|
regandval[1] &= andmask;
|
||||||
|
regandval[1] |= ormask;
|
||||||
|
|
||||||
|
/* Write the register */
|
||||||
|
err = i2c_master_send(ab3100->i2c_client, regandval, 2);
|
||||||
|
if (err < 0) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (write register): %d\n",
|
||||||
|
err);
|
||||||
|
goto get_maskset_unlock;
|
||||||
|
} else if (err != 2) {
|
||||||
|
dev_err(ab3100->dev,
|
||||||
|
"write error (write register) "
|
||||||
|
"%d bytes transferred (expected 2)\n",
|
||||||
|
err);
|
||||||
|
err = -EIO;
|
||||||
|
goto get_maskset_unlock;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* All is well */
|
||||||
|
err = 0;
|
||||||
|
|
||||||
|
get_maskset_unlock:
|
||||||
|
mutex_unlock(&ab3100->access_mutex);
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(ab3100_mask_and_set_register);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Register a simple callback for handling any AB3100 events.
|
||||||
|
*/
|
||||||
|
int ab3100_event_register(struct ab3100 *ab3100,
|
||||||
|
struct notifier_block *nb)
|
||||||
|
{
|
||||||
|
return blocking_notifier_chain_register(&ab3100->event_subscribers,
|
||||||
|
nb);
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(ab3100_event_register);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Remove a previously registered callback.
|
||||||
|
*/
|
||||||
|
int ab3100_event_unregister(struct ab3100 *ab3100,
|
||||||
|
struct notifier_block *nb)
|
||||||
|
{
|
||||||
|
return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
|
||||||
|
nb);
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(ab3100_event_unregister);
|
||||||
|
|
||||||
|
|
||||||
|
int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
|
||||||
|
u32 *fatevent)
|
||||||
|
{
|
||||||
|
if (!ab3100->startup_events_read)
|
||||||
|
return -EAGAIN; /* Try again later */
|
||||||
|
*fatevent = ab3100->startup_events;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
|
||||||
|
|
||||||
|
/* Interrupt handling worker */
|
||||||
|
static void ab3100_work(struct work_struct *work)
|
||||||
|
{
|
||||||
|
struct ab3100 *ab3100 = container_of(work, struct ab3100, work);
|
||||||
|
u8 event_regs[3];
|
||||||
|
u32 fatevent;
|
||||||
|
int err;
|
||||||
|
|
||||||
|
err = ab3100_get_register_page(ab3100, AB3100_EVENTA1,
|
||||||
|
event_regs, 3);
|
||||||
|
if (err)
|
||||||
|
goto err_event_wq;
|
||||||
|
|
||||||
|
fatevent = (event_regs[0] << 16) |
|
||||||
|
(event_regs[1] << 8) |
|
||||||
|
event_regs[2];
|
||||||
|
|
||||||
|
if (!ab3100->startup_events_read) {
|
||||||
|
ab3100->startup_events = fatevent;
|
||||||
|
ab3100->startup_events_read = true;
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
* The notified parties will have to mask out the events
|
||||||
|
* they're interested in and react to them. They will be
|
||||||
|
* notified on all events, then they use the fatevent value
|
||||||
|
* to determine if they're interested.
|
||||||
|
*/
|
||||||
|
blocking_notifier_call_chain(&ab3100->event_subscribers,
|
||||||
|
fatevent, NULL);
|
||||||
|
|
||||||
|
dev_dbg(ab3100->dev,
|
||||||
|
"IRQ Event: 0x%08x\n", fatevent);
|
||||||
|
|
||||||
|
/* By now the IRQ should be acked and deasserted so enable it again */
|
||||||
|
enable_irq(ab3100->i2c_client->irq);
|
||||||
|
return;
|
||||||
|
|
||||||
|
err_event_wq:
|
||||||
|
dev_dbg(ab3100->dev,
|
||||||
|
"error in event workqueue\n");
|
||||||
|
/* Enable the IRQ anyway, what choice do we have? */
|
||||||
|
enable_irq(ab3100->i2c_client->irq);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
static irqreturn_t ab3100_irq_handler(int irq, void *data)
|
||||||
|
{
|
||||||
|
struct ab3100 *ab3100 = data;
|
||||||
|
/*
|
||||||
|
* Disable the IRQ and dispatch a worker to handle the
|
||||||
|
* event. Since the chip resides on I2C this is slow
|
||||||
|
* stuff and we will re-enable the interrupts once th
|
||||||
|
* worker has finished.
|
||||||
|
*/
|
||||||
|
disable_irq(ab3100->i2c_client->irq);
|
||||||
|
schedule_work(&ab3100->work);
|
||||||
|
return IRQ_HANDLED;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_DEBUG_FS
|
||||||
|
/*
|
||||||
|
* Some debugfs entries only exposed if we're using debug
|
||||||
|
*/
|
||||||
|
static int ab3100_registers_print(struct seq_file *s, void *p)
|
||||||
|
{
|
||||||
|
struct ab3100 *ab3100 = s->private;
|
||||||
|
u8 value;
|
||||||
|
u8 reg;
|
||||||
|
|
||||||
|
seq_printf(s, "AB3100 registers:\n");
|
||||||
|
|
||||||
|
for (reg = 0; reg < 0xff; reg++) {
|
||||||
|
ab3100_get_register(ab3100, reg, &value);
|
||||||
|
seq_printf(s, "[0x%x]: 0x%x\n", reg, value);
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ab3100_registers_open(struct inode *inode, struct file *file)
|
||||||
|
{
|
||||||
|
return single_open(file, ab3100_registers_print, inode->i_private);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct file_operations ab3100_registers_fops = {
|
||||||
|
.open = ab3100_registers_open,
|
||||||
|
.read = seq_read,
|
||||||
|
.llseek = seq_lseek,
|
||||||
|
.release = single_release,
|
||||||
|
.owner = THIS_MODULE,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct ab3100_get_set_reg_priv {
|
||||||
|
struct ab3100 *ab3100;
|
||||||
|
bool mode;
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file)
|
||||||
|
{
|
||||||
|
file->private_data = inode->i_private;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ab3100_get_set_reg(struct file *file,
|
||||||
|
const char __user *user_buf,
|
||||||
|
size_t count, loff_t *ppos)
|
||||||
|
{
|
||||||
|
struct ab3100_get_set_reg_priv *priv = file->private_data;
|
||||||
|
struct ab3100 *ab3100 = priv->ab3100;
|
||||||
|
char buf[32];
|
||||||
|
int buf_size;
|
||||||
|
int regp;
|
||||||
|
unsigned long user_reg;
|
||||||
|
int err;
|
||||||
|
int i = 0;
|
||||||
|
|
||||||
|
/* Get userspace string and assure termination */
|
||||||
|
buf_size = min(count, (sizeof(buf)-1));
|
||||||
|
if (copy_from_user(buf, user_buf, buf_size))
|
||||||
|
return -EFAULT;
|
||||||
|
buf[buf_size] = 0;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The idea is here to parse a string which is either
|
||||||
|
* "0xnn" for reading a register, or "0xaa 0xbb" for
|
||||||
|
* writing 0xbb to the register 0xaa. First move past
|
||||||
|
* whitespace and then begin to parse the register.
|
||||||
|
*/
|
||||||
|
while ((i < buf_size) && (buf[i] == ' '))
|
||||||
|
i++;
|
||||||
|
regp = i;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Advance pointer to end of string then terminate
|
||||||
|
* the register string. This is needed to satisfy
|
||||||
|
* the strict_strtoul() function.
|
||||||
|
*/
|
||||||
|
while ((i < buf_size) && (buf[i] != ' '))
|
||||||
|
i++;
|
||||||
|
buf[i] = '\0';
|
||||||
|
|
||||||
|
err = strict_strtoul(&buf[regp], 16, &user_reg);
|
||||||
|
if (err)
|
||||||
|
return err;
|
||||||
|
if (user_reg > 0xff)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
/* Either we read or we write a register here */
|
||||||
|
if (!priv->mode) {
|
||||||
|
/* Reading */
|
||||||
|
u8 reg = (u8) user_reg;
|
||||||
|
u8 regvalue;
|
||||||
|
|
||||||
|
ab3100_get_register(ab3100, reg, ®value);
|
||||||
|
|
||||||
|
dev_info(ab3100->dev,
|
||||||
|
"debug read AB3100 reg[0x%02x]: 0x%02x\n",
|
||||||
|
reg, regvalue);
|
||||||
|
} else {
|
||||||
|
int valp;
|
||||||
|
unsigned long user_value;
|
||||||
|
u8 reg = (u8) user_reg;
|
||||||
|
u8 value;
|
||||||
|
u8 regvalue;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Writing, we need some value to write to
|
||||||
|
* the register so keep parsing the string
|
||||||
|
* from userspace.
|
||||||
|
*/
|
||||||
|
i++;
|
||||||
|
while ((i < buf_size) && (buf[i] == ' '))
|
||||||
|
i++;
|
||||||
|
valp = i;
|
||||||
|
while ((i < buf_size) && (buf[i] != ' '))
|
||||||
|
i++;
|
||||||
|
buf[i] = '\0';
|
||||||
|
|
||||||
|
err = strict_strtoul(&buf[valp], 16, &user_value);
|
||||||
|
if (err)
|
||||||
|
return err;
|
||||||
|
if (user_reg > 0xff)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
value = (u8) user_value;
|
||||||
|
ab3100_set_register(ab3100, reg, value);
|
||||||
|
ab3100_get_register(ab3100, reg, ®value);
|
||||||
|
|
||||||
|
dev_info(ab3100->dev,
|
||||||
|
"debug write reg[0x%02x] with 0x%02x, "
|
||||||
|
"after readback: 0x%02x\n",
|
||||||
|
reg, value, regvalue);
|
||||||
|
}
|
||||||
|
return buf_size;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct file_operations ab3100_get_set_reg_fops = {
|
||||||
|
.open = ab3100_get_set_reg_open_file,
|
||||||
|
.write = ab3100_get_set_reg,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct dentry *ab3100_dir;
|
||||||
|
static struct dentry *ab3100_reg_file;
|
||||||
|
static struct ab3100_get_set_reg_priv ab3100_get_priv;
|
||||||
|
static struct dentry *ab3100_get_reg_file;
|
||||||
|
static struct ab3100_get_set_reg_priv ab3100_set_priv;
|
||||||
|
static struct dentry *ab3100_set_reg_file;
|
||||||
|
|
||||||
|
static void ab3100_setup_debugfs(struct ab3100 *ab3100)
|
||||||
|
{
|
||||||
|
int err;
|
||||||
|
|
||||||
|
ab3100_dir = debugfs_create_dir("ab3100", NULL);
|
||||||
|
if (!ab3100_dir)
|
||||||
|
goto exit_no_debugfs;
|
||||||
|
|
||||||
|
ab3100_reg_file = debugfs_create_file("registers",
|
||||||
|
S_IRUGO, ab3100_dir, ab3100,
|
||||||
|
&ab3100_registers_fops);
|
||||||
|
if (!ab3100_reg_file) {
|
||||||
|
err = -ENOMEM;
|
||||||
|
goto exit_destroy_dir;
|
||||||
|
}
|
||||||
|
|
||||||
|
ab3100_get_priv.ab3100 = ab3100;
|
||||||
|
ab3100_get_priv.mode = false;
|
||||||
|
ab3100_get_reg_file = debugfs_create_file("get_reg",
|
||||||
|
S_IWUGO, ab3100_dir, &ab3100_get_priv,
|
||||||
|
&ab3100_get_set_reg_fops);
|
||||||
|
if (!ab3100_get_reg_file) {
|
||||||
|
err = -ENOMEM;
|
||||||
|
goto exit_destroy_reg;
|
||||||
|
}
|
||||||
|
|
||||||
|
ab3100_set_priv.ab3100 = ab3100;
|
||||||
|
ab3100_set_priv.mode = true;
|
||||||
|
ab3100_set_reg_file = debugfs_create_file("set_reg",
|
||||||
|
S_IWUGO, ab3100_dir, &ab3100_set_priv,
|
||||||
|
&ab3100_get_set_reg_fops);
|
||||||
|
if (!ab3100_set_reg_file) {
|
||||||
|
err = -ENOMEM;
|
||||||
|
goto exit_destroy_get_reg;
|
||||||
|
}
|
||||||
|
return;
|
||||||
|
|
||||||
|
exit_destroy_get_reg:
|
||||||
|
debugfs_remove(ab3100_get_reg_file);
|
||||||
|
exit_destroy_reg:
|
||||||
|
debugfs_remove(ab3100_reg_file);
|
||||||
|
exit_destroy_dir:
|
||||||
|
debugfs_remove(ab3100_dir);
|
||||||
|
exit_no_debugfs:
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
static inline void ab3100_remove_debugfs(void)
|
||||||
|
{
|
||||||
|
debugfs_remove(ab3100_set_reg_file);
|
||||||
|
debugfs_remove(ab3100_get_reg_file);
|
||||||
|
debugfs_remove(ab3100_reg_file);
|
||||||
|
debugfs_remove(ab3100_dir);
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
static inline void ab3100_remove_debugfs(void)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Basic set-up, datastructure creation/destruction and I2C interface.
|
||||||
|
* This sets up a default config in the AB3100 chip so that it
|
||||||
|
* will work as expected.
|
||||||
|
*/
|
||||||
|
|
||||||
|
struct ab3100_init_setting {
|
||||||
|
u8 abreg;
|
||||||
|
u8 setting;
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct ab3100_init_setting __initdata
|
||||||
|
ab3100_init_settings[] = {
|
||||||
|
{
|
||||||
|
.abreg = AB3100_MCA,
|
||||||
|
.setting = 0x01
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_MCB,
|
||||||
|
.setting = 0x30
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_IMRA1,
|
||||||
|
.setting = 0x00
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_IMRA2,
|
||||||
|
.setting = 0xFF
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_IMRA3,
|
||||||
|
.setting = 0x01
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_IMRB1,
|
||||||
|
.setting = 0xFF
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_IMRB2,
|
||||||
|
.setting = 0xFF
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_IMRB3,
|
||||||
|
.setting = 0xFF
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_SUP,
|
||||||
|
.setting = 0x00
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_DIS,
|
||||||
|
.setting = 0xF0
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_D0C,
|
||||||
|
.setting = 0x00
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_D1C,
|
||||||
|
.setting = 0x00
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_D2C,
|
||||||
|
.setting = 0x00
|
||||||
|
}, {
|
||||||
|
.abreg = AB3100_D3C,
|
||||||
|
.setting = 0x00
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init ab3100_setup(struct ab3100 *ab3100)
|
||||||
|
{
|
||||||
|
int err = 0;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
|
||||||
|
err = ab3100_set_register(ab3100,
|
||||||
|
ab3100_init_settings[i].abreg,
|
||||||
|
ab3100_init_settings[i].setting);
|
||||||
|
if (err)
|
||||||
|
goto exit_no_setup;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Special trick to make the AB3100 use the 32kHz clock (RTC)
|
||||||
|
* bit 3 in test registe 0x02 is a special, undocumented test
|
||||||
|
* register bit that only exist in AB3100 P1E
|
||||||
|
*/
|
||||||
|
if (ab3100->chip_id == 0xc4) {
|
||||||
|
dev_warn(ab3100->dev,
|
||||||
|
"AB3100 P1E variant detected, "
|
||||||
|
"forcing chip to 32KHz\n");
|
||||||
|
err = ab3100_set_test_register(ab3100, 0x02, 0x08);
|
||||||
|
}
|
||||||
|
|
||||||
|
exit_no_setup:
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Here we define all the platform devices that appear
|
||||||
|
* as children of the AB3100. These are regular platform
|
||||||
|
* devices with the IORESOURCE_IO .start and .end set
|
||||||
|
* to correspond to the internal AB3100 register range
|
||||||
|
* mapping to the corresponding subdevice.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define AB3100_DEVICE(devname, devid) \
|
||||||
|
static struct platform_device ab3100_##devname##_device = { \
|
||||||
|
.name = devid, \
|
||||||
|
.id = -1, \
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This lists all the subdevices and corresponding register
|
||||||
|
* ranges.
|
||||||
|
*/
|
||||||
|
AB3100_DEVICE(dac, "ab3100-dac");
|
||||||
|
AB3100_DEVICE(leds, "ab3100-leds");
|
||||||
|
AB3100_DEVICE(power, "ab3100-power");
|
||||||
|
AB3100_DEVICE(regulators, "ab3100-regulators");
|
||||||
|
AB3100_DEVICE(sim, "ab3100-sim");
|
||||||
|
AB3100_DEVICE(uart, "ab3100-uart");
|
||||||
|
AB3100_DEVICE(rtc, "ab3100-rtc");
|
||||||
|
AB3100_DEVICE(charger, "ab3100-charger");
|
||||||
|
AB3100_DEVICE(boost, "ab3100-boost");
|
||||||
|
AB3100_DEVICE(adc, "ab3100-adc");
|
||||||
|
AB3100_DEVICE(fuelgauge, "ab3100-fuelgauge");
|
||||||
|
AB3100_DEVICE(vibrator, "ab3100-vibrator");
|
||||||
|
AB3100_DEVICE(otp, "ab3100-otp");
|
||||||
|
AB3100_DEVICE(codec, "ab3100-codec");
|
||||||
|
|
||||||
|
static struct platform_device *
|
||||||
|
ab3100_platform_devs[] = {
|
||||||
|
&ab3100_dac_device,
|
||||||
|
&ab3100_leds_device,
|
||||||
|
&ab3100_power_device,
|
||||||
|
&ab3100_regulators_device,
|
||||||
|
&ab3100_sim_device,
|
||||||
|
&ab3100_uart_device,
|
||||||
|
&ab3100_rtc_device,
|
||||||
|
&ab3100_charger_device,
|
||||||
|
&ab3100_boost_device,
|
||||||
|
&ab3100_adc_device,
|
||||||
|
&ab3100_fuelgauge_device,
|
||||||
|
&ab3100_vibrator_device,
|
||||||
|
&ab3100_otp_device,
|
||||||
|
&ab3100_codec_device,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct ab_family_id {
|
||||||
|
u8 id;
|
||||||
|
char *name;
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct ab_family_id ids[] __initdata = {
|
||||||
|
/* AB3100 */
|
||||||
|
{
|
||||||
|
.id = 0xc0,
|
||||||
|
.name = "P1A"
|
||||||
|
}, {
|
||||||
|
.id = 0xc1,
|
||||||
|
.name = "P1B"
|
||||||
|
}, {
|
||||||
|
.id = 0xc2,
|
||||||
|
.name = "P1C"
|
||||||
|
}, {
|
||||||
|
.id = 0xc3,
|
||||||
|
.name = "P1D"
|
||||||
|
}, {
|
||||||
|
.id = 0xc4,
|
||||||
|
.name = "P1E"
|
||||||
|
}, {
|
||||||
|
.id = 0xc5,
|
||||||
|
.name = "P1F/R1A"
|
||||||
|
}, {
|
||||||
|
.id = 0xc6,
|
||||||
|
.name = "P1G/R1A"
|
||||||
|
}, {
|
||||||
|
.id = 0xc7,
|
||||||
|
.name = "P2A/R2A"
|
||||||
|
}, {
|
||||||
|
.id = 0xc8,
|
||||||
|
.name = "P2B/R2B"
|
||||||
|
},
|
||||||
|
/* AB3000 variants, not supported */
|
||||||
|
{
|
||||||
|
.id = 0xa0
|
||||||
|
}, {
|
||||||
|
.id = 0xa1
|
||||||
|
}, {
|
||||||
|
.id = 0xa2
|
||||||
|
}, {
|
||||||
|
.id = 0xa3
|
||||||
|
}, {
|
||||||
|
.id = 0xa4
|
||||||
|
}, {
|
||||||
|
.id = 0xa5
|
||||||
|
}, {
|
||||||
|
.id = 0xa6
|
||||||
|
}, {
|
||||||
|
.id = 0xa7
|
||||||
|
},
|
||||||
|
/* Terminator */
|
||||||
|
{
|
||||||
|
.id = 0x00,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init ab3100_probe(struct i2c_client *client,
|
||||||
|
const struct i2c_device_id *id)
|
||||||
|
{
|
||||||
|
struct ab3100 *ab3100;
|
||||||
|
int err;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
ab3100 = kzalloc(sizeof(struct ab3100), GFP_KERNEL);
|
||||||
|
if (!ab3100) {
|
||||||
|
dev_err(&client->dev, "could not allocate AB3100 device\n");
|
||||||
|
return -ENOMEM;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Initialize data structure */
|
||||||
|
mutex_init(&ab3100->access_mutex);
|
||||||
|
BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
|
||||||
|
|
||||||
|
ab3100->i2c_client = client;
|
||||||
|
ab3100->dev = &ab3100->i2c_client->dev;
|
||||||
|
|
||||||
|
i2c_set_clientdata(client, ab3100);
|
||||||
|
|
||||||
|
/* Read chip ID register */
|
||||||
|
err = ab3100_get_register(ab3100, AB3100_CID,
|
||||||
|
&ab3100->chip_id);
|
||||||
|
if (err) {
|
||||||
|
dev_err(&client->dev,
|
||||||
|
"could not communicate with the AB3100 analog "
|
||||||
|
"baseband chip\n");
|
||||||
|
goto exit_no_detect;
|
||||||
|
}
|
||||||
|
|
||||||
|
for (i = 0; ids[i].id != 0x0; i++) {
|
||||||
|
if (ids[i].id == ab3100->chip_id) {
|
||||||
|
if (ids[i].name != NULL) {
|
||||||
|
snprintf(&ab3100->chip_name[0],
|
||||||
|
sizeof(ab3100->chip_name) - 1,
|
||||||
|
"AB3100 %s",
|
||||||
|
ids[i].name);
|
||||||
|
break;
|
||||||
|
} else {
|
||||||
|
dev_err(&client->dev,
|
||||||
|
"AB3000 is not supported\n");
|
||||||
|
goto exit_no_detect;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (ids[i].id == 0x0) {
|
||||||
|
dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
|
||||||
|
ab3100->chip_id);
|
||||||
|
dev_err(&client->dev, "accepting it anyway. Please update "
|
||||||
|
"the driver.\n");
|
||||||
|
goto exit_no_detect;
|
||||||
|
}
|
||||||
|
|
||||||
|
dev_info(&client->dev, "Detected chip: %s\n",
|
||||||
|
&ab3100->chip_name[0]);
|
||||||
|
|
||||||
|
/* Attach a second dummy i2c_client to the test register address */
|
||||||
|
ab3100->testreg_client = i2c_new_dummy(client->adapter,
|
||||||
|
client->addr + 1);
|
||||||
|
if (!ab3100->testreg_client) {
|
||||||
|
err = -ENOMEM;
|
||||||
|
goto exit_no_testreg_client;
|
||||||
|
}
|
||||||
|
|
||||||
|
strlcpy(ab3100->testreg_client->name, id->name,
|
||||||
|
sizeof(ab3100->testreg_client->name));
|
||||||
|
|
||||||
|
err = ab3100_setup(ab3100);
|
||||||
|
if (err)
|
||||||
|
goto exit_no_setup;
|
||||||
|
|
||||||
|
INIT_WORK(&ab3100->work, ab3100_work);
|
||||||
|
|
||||||
|
/* This real unpredictable IRQ is of course sampled for entropy */
|
||||||
|
err = request_irq(client->irq, ab3100_irq_handler,
|
||||||
|
IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
|
||||||
|
"AB3100 IRQ", ab3100);
|
||||||
|
if (err)
|
||||||
|
goto exit_no_irq;
|
||||||
|
|
||||||
|
/* Set parent and a pointer back to the container in device data */
|
||||||
|
for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
|
||||||
|
ab3100_platform_devs[i]->dev.parent =
|
||||||
|
&client->dev;
|
||||||
|
platform_set_drvdata(ab3100_platform_devs[i], ab3100);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Register the platform devices */
|
||||||
|
platform_add_devices(ab3100_platform_devs,
|
||||||
|
ARRAY_SIZE(ab3100_platform_devs));
|
||||||
|
|
||||||
|
ab3100_setup_debugfs(ab3100);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
exit_no_irq:
|
||||||
|
exit_no_setup:
|
||||||
|
i2c_unregister_device(ab3100->testreg_client);
|
||||||
|
exit_no_testreg_client:
|
||||||
|
exit_no_detect:
|
||||||
|
kfree(ab3100);
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int __exit ab3100_remove(struct i2c_client *client)
|
||||||
|
{
|
||||||
|
struct ab3100 *ab3100 = i2c_get_clientdata(client);
|
||||||
|
int i;
|
||||||
|
|
||||||
|
/* Unregister subdevices */
|
||||||
|
for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++)
|
||||||
|
platform_device_unregister(ab3100_platform_devs[i]);
|
||||||
|
|
||||||
|
ab3100_remove_debugfs();
|
||||||
|
i2c_unregister_device(ab3100->testreg_client);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* At this point, all subscribers should have unregistered
|
||||||
|
* their notifiers so deactivate IRQ
|
||||||
|
*/
|
||||||
|
free_irq(client->irq, ab3100);
|
||||||
|
kfree(ab3100);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct i2c_device_id ab3100_id[] = {
|
||||||
|
{ "ab3100", ab3100 },
|
||||||
|
{ }
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(i2c, ab3100_id);
|
||||||
|
|
||||||
|
static struct i2c_driver ab3100_driver = {
|
||||||
|
.driver = {
|
||||||
|
.name = "ab3100",
|
||||||
|
.owner = THIS_MODULE,
|
||||||
|
},
|
||||||
|
.id_table = ab3100_id,
|
||||||
|
.probe = ab3100_probe,
|
||||||
|
.remove = __exit_p(ab3100_remove),
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init ab3100_i2c_init(void)
|
||||||
|
{
|
||||||
|
return i2c_add_driver(&ab3100_driver);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void __exit ab3100_i2c_exit(void)
|
||||||
|
{
|
||||||
|
i2c_del_driver(&ab3100_driver);
|
||||||
|
}
|
||||||
|
|
||||||
|
subsys_initcall(ab3100_i2c_init);
|
||||||
|
module_exit(ab3100_i2c_exit);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
|
||||||
|
MODULE_DESCRIPTION("AB3100 core driver");
|
||||||
|
MODULE_LICENSE("GPL");
|
||||||
|
|
@ -0,0 +1,103 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2007-2009 ST-Ericsson AB
|
||||||
|
* License terms: GNU General Public License (GPL) version 2
|
||||||
|
* AB3100 core access functions
|
||||||
|
* Author: Linus Walleij <linus.walleij@stericsson.com>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/device.h>
|
||||||
|
|
||||||
|
#ifndef MFD_AB3100_H
|
||||||
|
#define MFD_AB3100_H
|
||||||
|
|
||||||
|
#define ABUNKNOWN 0
|
||||||
|
#define AB3000 1
|
||||||
|
#define AB3100 2
|
||||||
|
|
||||||
|
/*
|
||||||
|
* AB3100, EVENTA1, A2 and A3 event register flags
|
||||||
|
* these are catenated into a single 32-bit flag in the code
|
||||||
|
* for event notification broadcasts.
|
||||||
|
*/
|
||||||
|
#define AB3100_EVENTA1_ONSWA (0x01<<16)
|
||||||
|
#define AB3100_EVENTA1_ONSWB (0x02<<16)
|
||||||
|
#define AB3100_EVENTA1_ONSWC (0x04<<16)
|
||||||
|
#define AB3100_EVENTA1_DCIO (0x08<<16)
|
||||||
|
#define AB3100_EVENTA1_OVER_TEMP (0x10<<16)
|
||||||
|
#define AB3100_EVENTA1_SIM_OFF (0x20<<16)
|
||||||
|
#define AB3100_EVENTA1_VBUS (0x40<<16)
|
||||||
|
#define AB3100_EVENTA1_VSET_USB (0x80<<16)
|
||||||
|
|
||||||
|
#define AB3100_EVENTA2_READY_TX (0x01<<8)
|
||||||
|
#define AB3100_EVENTA2_READY_RX (0x02<<8)
|
||||||
|
#define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8)
|
||||||
|
#define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8)
|
||||||
|
#define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8)
|
||||||
|
#define AB3100_EVENTA2_MIDR (0x20<<8)
|
||||||
|
#define AB3100_EVENTA2_BATTERY_REM (0x40<<8)
|
||||||
|
#define AB3100_EVENTA2_ALARM (0x80<<8)
|
||||||
|
|
||||||
|
#define AB3100_EVENTA3_ADC_TRIG5 (0x01)
|
||||||
|
#define AB3100_EVENTA3_ADC_TRIG4 (0x02)
|
||||||
|
#define AB3100_EVENTA3_ADC_TRIG3 (0x04)
|
||||||
|
#define AB3100_EVENTA3_ADC_TRIG2 (0x08)
|
||||||
|
#define AB3100_EVENTA3_ADC_TRIGVBAT (0x10)
|
||||||
|
#define AB3100_EVENTA3_ADC_TRIGVTX (0x20)
|
||||||
|
#define AB3100_EVENTA3_ADC_TRIG1 (0x40)
|
||||||
|
#define AB3100_EVENTA3_ADC_TRIG0 (0x80)
|
||||||
|
|
||||||
|
/* AB3100, STR register flags */
|
||||||
|
#define AB3100_STR_ONSWA (0x01)
|
||||||
|
#define AB3100_STR_ONSWB (0x02)
|
||||||
|
#define AB3100_STR_ONSWC (0x04)
|
||||||
|
#define AB3100_STR_DCIO (0x08)
|
||||||
|
#define AB3100_STR_BOOT_MODE (0x10)
|
||||||
|
#define AB3100_STR_SIM_OFF (0x20)
|
||||||
|
#define AB3100_STR_BATT_REMOVAL (0x40)
|
||||||
|
#define AB3100_STR_VBUS (0x80)
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct ab3100
|
||||||
|
* @access_mutex: lock out concurrent accesses to the AB3100 registers
|
||||||
|
* @dev: pointer to the containing device
|
||||||
|
* @i2c_client: I2C client for this chip
|
||||||
|
* @testreg_client: secondary client for test registers
|
||||||
|
* @chip_name: name of this chip variant
|
||||||
|
* @chip_id: 8 bit chip ID for this chip variant
|
||||||
|
* @work: an event handling worker
|
||||||
|
* @event_subscribers: event subscribers are listed here
|
||||||
|
* @startup_events: a copy of the first reading of the event registers
|
||||||
|
* @startup_events_read: whether the first events have been read
|
||||||
|
*
|
||||||
|
* This struct is PRIVATE and devices using it should NOT
|
||||||
|
* access ANY fields. It is used as a token for calling the
|
||||||
|
* AB3100 functions.
|
||||||
|
*/
|
||||||
|
struct ab3100 {
|
||||||
|
struct mutex access_mutex;
|
||||||
|
struct device *dev;
|
||||||
|
struct i2c_client *i2c_client;
|
||||||
|
struct i2c_client *testreg_client;
|
||||||
|
char chip_name[32];
|
||||||
|
u8 chip_id;
|
||||||
|
struct work_struct work;
|
||||||
|
struct blocking_notifier_head event_subscribers;
|
||||||
|
u32 startup_events;
|
||||||
|
bool startup_events_read;
|
||||||
|
};
|
||||||
|
|
||||||
|
int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval);
|
||||||
|
int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval);
|
||||||
|
int ab3100_get_register_page(struct ab3100 *ab3100,
|
||||||
|
u8 first_reg, u8 *regvals, u8 numregs);
|
||||||
|
int ab3100_mask_and_set_register(struct ab3100 *ab3100,
|
||||||
|
u8 reg, u8 andmask, u8 ormask);
|
||||||
|
u8 ab3100_get_chip_type(struct ab3100 *ab3100);
|
||||||
|
int ab3100_event_register(struct ab3100 *ab3100,
|
||||||
|
struct notifier_block *nb);
|
||||||
|
int ab3100_event_unregister(struct ab3100 *ab3100,
|
||||||
|
struct notifier_block *nb);
|
||||||
|
int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
|
||||||
|
u32 *fatevent);
|
||||||
|
|
||||||
|
#endif
|
||||||
Loading…
Reference in New Issue