mirror of https://gitee.com/openkylin/linux.git
arm64: head.S: Fix CNTHCTL_EL2 access on VHE system
Bit positions of CNTHCTL_EL2 are changing depending on HCR_EL2.E2H bit. EL1PCEN and EL1PCTEN are 1st and 0th bits when E2H is not set, but they are 11th and 10th bits respectively when E2H is set. Current code is unintentionally setting wrong bits to CNTHCTL_EL2 with E2H set. In fact, we don't need to set those two bits, which allow EL1 and EL0 to access physical timer and counter respectively, if E2H and TGE are set for the host kernel. They will be configured later as necessary. First, we don't need to configure those bits for EL1, since the host kernel runs in EL2. It is a hypervisor's responsibility to configure them before entering a VM, which runs in EL0 and EL1. Second, EL0 accesses are configured in the later stage of boot process. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This commit is contained in:
parent
ee6a7fce8e
commit
1650ac49c2
|
@ -525,10 +525,21 @@ set_hcr:
|
|||
msr hcr_el2, x0
|
||||
isb
|
||||
|
||||
/* Generic timers. */
|
||||
/*
|
||||
* Allow Non-secure EL1 and EL0 to access physical timer and counter.
|
||||
* This is not necessary for VHE, since the host kernel runs in EL2,
|
||||
* and EL0 accesses are configured in the later stage of boot process.
|
||||
* Note that when HCR_EL2.E2H == 1, CNTHCTL_EL2 has the same bit layout
|
||||
* as CNTKCTL_EL1, and CNTKCTL_EL1 accessing instructions are redefined
|
||||
* to access CNTHCTL_EL2. This allows the kernel designed to run at EL1
|
||||
* to transparently mess with the EL0 bits via CNTKCTL_EL1 access in
|
||||
* EL2.
|
||||
*/
|
||||
cbnz x2, 1f
|
||||
mrs x0, cnthctl_el2
|
||||
orr x0, x0, #3 // Enable EL1 physical timers
|
||||
msr cnthctl_el2, x0
|
||||
1:
|
||||
msr cntvoff_el2, xzr // Clear virtual offset
|
||||
|
||||
#ifdef CONFIG_ARM_GIC_V3
|
||||
|
|
Loading…
Reference in New Issue