Revert "arm64: dts: amlogic: add missing ethernet reset ID"

It has been reported on IRC and in KernelCI boot tests, this change breaks
internal PHY support on the Amlogic G12A/SM1 Based boards.

We suspect the added signal to reset more than the Ethernet MAC but also
the MDIO/(RG)MII mux used to redirect the MAC signals to the internal PHY.

This reverts commit f3362f0c18 while we find
and acceptable solution to cleanly reset the Ethernet MAC.

Reported-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Jérôme Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210126080951.2383740-1-narmstrong@baylibre.com
This commit is contained in:
Neil Armstrong 2021-01-26 09:09:51 +01:00 committed by Kevin Hilman
parent 7386a559ca
commit 19f6fe976a
3 changed files with 0 additions and 7 deletions

View File

@ -280,8 +280,6 @@ ethmac: ethernet@ff3f0000 {
"timing-adjustment"; "timing-adjustment";
rx-fifo-depth = <4096>; rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>; tx-fifo-depth = <2048>;
resets = <&reset RESET_ETHERNET>;
reset-names = "stmmaceth";
power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>; power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>;
status = "disabled"; status = "disabled";
}; };

View File

@ -224,8 +224,6 @@ ethmac: ethernet@ff3f0000 {
"timing-adjustment"; "timing-adjustment";
rx-fifo-depth = <4096>; rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>; tx-fifo-depth = <2048>;
resets = <&reset RESET_ETHERNET>;
reset-names = "stmmaceth";
status = "disabled"; status = "disabled";
mdio0: mdio { mdio0: mdio {

View File

@ -13,7 +13,6 @@
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/meson-gxbb-power.h> #include <dt-bindings/power/meson-gxbb-power.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/thermal/thermal.h> #include <dt-bindings/thermal/thermal.h>
/ { / {
@ -576,8 +575,6 @@ ethmac: ethernet@c9410000 {
interrupt-names = "macirq"; interrupt-names = "macirq";
rx-fifo-depth = <4096>; rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>; tx-fifo-depth = <2048>;
resets = <&reset RESET_ETHERNET>;
reset-names = "stmmaceth";
power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
status = "disabled"; status = "disabled";
}; };