mirror of https://gitee.com/openkylin/linux.git
Merge branch 'DSA-mtu'
Vladimir Oltean says: ==================== Configure the MTU on DSA switches This series adds support for configuring the MTU on front-panel switch ports, while seamlessly adapting the CPU port and the DSA master to the largest value plus the tagger overhead. It also implements bridge MTU auto-normalization within the DSA core, as resulted after the feedback of the implementation of this feature inside the bridge driver in v2. Support was added for quite a number of switches, in the hope that this series would gain some traction: - sja1105 - felix - vsc73xx - b53 and rest of the platform V3 of this series was submitted here: https://patchwork.ozlabs.org/cover/1262394/ V2 of this series was submitted here: https://patchwork.ozlabs.org/cover/1261471/ V1 of this series was submitted here: https://patchwork.ozlabs.org/cover/1199868/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller
commit
1a147b74c2
|
|
@ -699,9 +699,6 @@ int b53_configure_vlan(struct dsa_switch *ds)
|
|||
b53_write16(dev, B53_VLAN_PAGE,
|
||||
B53_VLAN_PORT_DEF_TAG(i), def_vid);
|
||||
|
||||
if (!is5325(dev) && !is5365(dev))
|
||||
b53_set_jumbo(dev, dev->enable_jumbo, false);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(b53_configure_vlan);
|
||||
|
|
@ -807,8 +804,6 @@ static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
|
|||
static int b53_reset_switch(struct b53_device *priv)
|
||||
{
|
||||
/* reset vlans */
|
||||
priv->enable_jumbo = false;
|
||||
|
||||
memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
|
||||
memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
|
||||
|
||||
|
|
@ -2065,6 +2060,26 @@ int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
|
|||
}
|
||||
EXPORT_SYMBOL(b53_set_mac_eee);
|
||||
|
||||
static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
|
||||
{
|
||||
struct b53_device *dev = ds->priv;
|
||||
bool enable_jumbo;
|
||||
bool allow_10_100;
|
||||
|
||||
if (is5325(dev) || is5365(dev))
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
enable_jumbo = (mtu >= JMS_MIN_SIZE);
|
||||
allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID);
|
||||
|
||||
return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
|
||||
}
|
||||
|
||||
static int b53_get_max_mtu(struct dsa_switch *ds, int port)
|
||||
{
|
||||
return JMS_MAX_SIZE;
|
||||
}
|
||||
|
||||
static const struct dsa_switch_ops b53_switch_ops = {
|
||||
.get_tag_protocol = b53_get_tag_protocol,
|
||||
.setup = b53_setup,
|
||||
|
|
@ -2102,6 +2117,8 @@ static const struct dsa_switch_ops b53_switch_ops = {
|
|||
.port_mdb_prepare = b53_mdb_prepare,
|
||||
.port_mdb_add = b53_mdb_add,
|
||||
.port_mdb_del = b53_mdb_del,
|
||||
.port_max_mtu = b53_get_max_mtu,
|
||||
.port_change_mtu = b53_change_mtu,
|
||||
};
|
||||
|
||||
struct b53_chip_data {
|
||||
|
|
|
|||
|
|
@ -532,6 +532,7 @@ static int felix_setup(struct dsa_switch *ds)
|
|||
ANA_PGID_PGID_PGID(GENMASK(ocelot->num_phys_ports, 0)),
|
||||
ANA_PGID_PGID, PGID_UC);
|
||||
|
||||
ds->mtu_enforcement_ingress = true;
|
||||
/* It looks like the MAC/PCS interrupt register - PM0_IEVENT (0x8040)
|
||||
* isn't instantiated for the Felix PF.
|
||||
* In-band AN may take a few ms to complete, so we need to poll.
|
||||
|
|
@ -609,6 +610,22 @@ static bool felix_txtstamp(struct dsa_switch *ds, int port,
|
|||
return false;
|
||||
}
|
||||
|
||||
static int felix_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
|
||||
{
|
||||
struct ocelot *ocelot = ds->priv;
|
||||
|
||||
ocelot_port_set_maxlen(ocelot, port, new_mtu);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int felix_get_max_mtu(struct dsa_switch *ds, int port)
|
||||
{
|
||||
struct ocelot *ocelot = ds->priv;
|
||||
|
||||
return ocelot_get_max_mtu(ocelot, port);
|
||||
}
|
||||
|
||||
static int felix_cls_flower_add(struct dsa_switch *ds, int port,
|
||||
struct flow_cls_offload *cls, bool ingress)
|
||||
{
|
||||
|
|
@ -664,6 +681,8 @@ static const struct dsa_switch_ops felix_switch_ops = {
|
|||
.port_hwtstamp_set = felix_hwtstamp_set,
|
||||
.port_rxtstamp = felix_rxtstamp,
|
||||
.port_txtstamp = felix_txtstamp,
|
||||
.port_change_mtu = felix_change_mtu,
|
||||
.port_max_mtu = felix_get_max_mtu,
|
||||
.cls_flower_add = felix_cls_flower_add,
|
||||
.cls_flower_del = felix_cls_flower_del,
|
||||
.cls_flower_stats = felix_cls_flower_stats,
|
||||
|
|
|
|||
|
|
@ -126,6 +126,7 @@ enum sja1105_reset_reason {
|
|||
SJA1105_RX_HWTSTAMPING,
|
||||
SJA1105_AGEING_TIME,
|
||||
SJA1105_SCHEDULING,
|
||||
SJA1105_BEST_EFFORT_POLICING,
|
||||
};
|
||||
|
||||
int sja1105_static_config_reload(struct sja1105_private *priv,
|
||||
|
|
|
|||
|
|
@ -519,12 +519,12 @@ static int sja1105_init_avb_params(struct sja1105_private *priv)
|
|||
#define SJA1105_RATE_MBPS(speed) (((speed) * 64000) / 1000)
|
||||
|
||||
static void sja1105_setup_policer(struct sja1105_l2_policing_entry *policing,
|
||||
int index)
|
||||
int index, int mtu)
|
||||
{
|
||||
policing[index].sharindx = index;
|
||||
policing[index].smax = 65535; /* Burst size in bytes */
|
||||
policing[index].rate = SJA1105_RATE_MBPS(1000);
|
||||
policing[index].maxlen = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
|
||||
policing[index].maxlen = mtu;
|
||||
policing[index].partition = 0;
|
||||
}
|
||||
|
||||
|
|
@ -556,12 +556,16 @@ static int sja1105_init_l2_policing(struct sja1105_private *priv)
|
|||
*/
|
||||
for (i = 0, k = 0; i < SJA1105_NUM_PORTS; i++) {
|
||||
int bcast = (SJA1105_NUM_PORTS * SJA1105_NUM_TC) + i;
|
||||
int mtu = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
|
||||
|
||||
if (dsa_is_cpu_port(priv->ds, i))
|
||||
mtu += VLAN_HLEN;
|
||||
|
||||
for (j = 0; j < SJA1105_NUM_TC; j++, k++)
|
||||
sja1105_setup_policer(policing, k);
|
||||
sja1105_setup_policer(policing, k, mtu);
|
||||
|
||||
/* Set up this port's policer for broadcast traffic */
|
||||
sja1105_setup_policer(policing, bcast);
|
||||
sja1105_setup_policer(policing, bcast, mtu);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1544,6 +1548,7 @@ static const char * const sja1105_reset_reasons[] = {
|
|||
[SJA1105_RX_HWTSTAMPING] = "RX timestamping",
|
||||
[SJA1105_AGEING_TIME] = "Ageing time",
|
||||
[SJA1105_SCHEDULING] = "Time-aware scheduling",
|
||||
[SJA1105_BEST_EFFORT_POLICING] = "Best-effort policing",
|
||||
};
|
||||
|
||||
/* For situations where we need to change a setting at runtime that is only
|
||||
|
|
@ -1952,6 +1957,8 @@ static int sja1105_setup(struct dsa_switch *ds)
|
|||
/* Advertise the 8 egress queues */
|
||||
ds->num_tx_queues = SJA1105_NUM_TC;
|
||||
|
||||
ds->mtu_enforcement_ingress = true;
|
||||
|
||||
/* The DSA/switchdev model brings up switch ports in standalone mode by
|
||||
* default, and that means vlan_filtering is 0 since they're not under
|
||||
* a bridge, so it's safe to set up switch tagging at this time.
|
||||
|
|
@ -2120,6 +2127,39 @@ static int sja1105_set_ageing_time(struct dsa_switch *ds,
|
|||
return sja1105_static_config_reload(priv, SJA1105_AGEING_TIME);
|
||||
}
|
||||
|
||||
static int sja1105_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
|
||||
{
|
||||
int bcast = (SJA1105_NUM_PORTS * SJA1105_NUM_TC) + port;
|
||||
struct sja1105_l2_policing_entry *policing;
|
||||
struct sja1105_private *priv = ds->priv;
|
||||
int tc;
|
||||
|
||||
new_mtu += VLAN_ETH_HLEN + ETH_FCS_LEN;
|
||||
|
||||
if (dsa_is_cpu_port(ds, port))
|
||||
new_mtu += VLAN_HLEN;
|
||||
|
||||
policing = priv->static_config.tables[BLK_IDX_L2_POLICING].entries;
|
||||
|
||||
/* We set all 9 port policers to the same value, so just checking the
|
||||
* broadcast one is fine.
|
||||
*/
|
||||
if (policing[bcast].maxlen == new_mtu)
|
||||
return 0;
|
||||
|
||||
for (tc = 0; tc < SJA1105_NUM_TC; tc++)
|
||||
policing[port * SJA1105_NUM_TC + tc].maxlen = new_mtu;
|
||||
|
||||
policing[bcast].maxlen = new_mtu;
|
||||
|
||||
return sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING);
|
||||
}
|
||||
|
||||
static int sja1105_get_max_mtu(struct dsa_switch *ds, int port)
|
||||
{
|
||||
return 2043 - VLAN_ETH_HLEN - ETH_FCS_LEN;
|
||||
}
|
||||
|
||||
static int sja1105_port_setup_tc(struct dsa_switch *ds, int port,
|
||||
enum tc_setup_type type,
|
||||
void *type_data)
|
||||
|
|
@ -2215,6 +2255,8 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
|
|||
.setup = sja1105_setup,
|
||||
.teardown = sja1105_teardown,
|
||||
.set_ageing_time = sja1105_set_ageing_time,
|
||||
.port_change_mtu = sja1105_change_mtu,
|
||||
.port_max_mtu = sja1105_get_max_mtu,
|
||||
.phylink_validate = sja1105_phylink_validate,
|
||||
.phylink_mac_link_state = sja1105_mac_pcs_get_state,
|
||||
.phylink_mac_config = sja1105_mac_config,
|
||||
|
|
|
|||
|
|
@ -664,16 +664,6 @@ static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
|
|||
VSC73XX_MAC_CFG_TX_EN |
|
||||
VSC73XX_MAC_CFG_RX_EN);
|
||||
|
||||
/* Max length, we can do up to 9.6 KiB, so allow that.
|
||||
* According to application not "VSC7398 Jumbo Frames" setting
|
||||
* up the MTU to 9.6 KB does not affect the performance on standard
|
||||
* frames, so just enable it. It is clear from the application note
|
||||
* that "9.6 kilobytes" == 9600 bytes.
|
||||
*/
|
||||
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
||||
port,
|
||||
VSC73XX_MAXLEN, 9600);
|
||||
|
||||
/* Flow control for the CPU port:
|
||||
* Use a zero delay pause frame when pause condition is left
|
||||
* Obey pause control frames
|
||||
|
|
@ -1030,6 +1020,24 @@ static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port,
|
|||
}
|
||||
}
|
||||
|
||||
static int vsc73xx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
|
||||
{
|
||||
struct vsc73xx *vsc = ds->priv;
|
||||
|
||||
return vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
|
||||
VSC73XX_MAXLEN, new_mtu);
|
||||
}
|
||||
|
||||
/* According to application not "VSC7398 Jumbo Frames" setting
|
||||
* up the MTU to 9.6 KB does not affect the performance on standard
|
||||
* frames. It is clear from the application note that
|
||||
* "9.6 kilobytes" == 9600 bytes.
|
||||
*/
|
||||
static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port)
|
||||
{
|
||||
return 9600;
|
||||
}
|
||||
|
||||
static const struct dsa_switch_ops vsc73xx_ds_ops = {
|
||||
.get_tag_protocol = vsc73xx_get_tag_protocol,
|
||||
.setup = vsc73xx_setup,
|
||||
|
|
@ -1041,6 +1049,8 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
|
|||
.get_sset_count = vsc73xx_get_sset_count,
|
||||
.port_enable = vsc73xx_port_enable,
|
||||
.port_disable = vsc73xx_port_disable,
|
||||
.port_change_mtu = vsc73xx_change_mtu,
|
||||
.port_max_mtu = vsc73xx_get_max_mtu,
|
||||
};
|
||||
|
||||
static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
||||
|
|
|
|||
|
|
@ -1248,6 +1248,14 @@ static int bgmac_set_mac_address(struct net_device *net_dev, void *addr)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int bgmac_change_mtu(struct net_device *net_dev, int mtu)
|
||||
{
|
||||
struct bgmac *bgmac = netdev_priv(net_dev);
|
||||
|
||||
bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + mtu);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct net_device_ops bgmac_netdev_ops = {
|
||||
.ndo_open = bgmac_open,
|
||||
.ndo_stop = bgmac_stop,
|
||||
|
|
@ -1256,6 +1264,7 @@ static const struct net_device_ops bgmac_netdev_ops = {
|
|||
.ndo_set_mac_address = bgmac_set_mac_address,
|
||||
.ndo_validate_addr = eth_validate_addr,
|
||||
.ndo_do_ioctl = phy_do_ioctl_running,
|
||||
.ndo_change_mtu = bgmac_change_mtu,
|
||||
};
|
||||
|
||||
/**************************************************
|
||||
|
|
@ -1530,6 +1539,9 @@ int bgmac_enet_probe(struct bgmac *bgmac)
|
|||
net_dev->hw_features = net_dev->features;
|
||||
net_dev->vlan_features = net_dev->features;
|
||||
|
||||
/* Omit FCS from max MTU size */
|
||||
net_dev->max_mtu = BGMAC_RX_MAX_FRAME_SIZE - ETH_FCS_LEN;
|
||||
|
||||
err = register_netdev(bgmac->net_dev);
|
||||
if (err) {
|
||||
dev_err(bgmac->dev, "Cannot register net device\n");
|
||||
|
|
|
|||
|
|
@ -351,7 +351,7 @@
|
|||
#define BGMAC_DESC_CTL0_IOC 0x20000000 /* IRQ on complete */
|
||||
#define BGMAC_DESC_CTL0_EOF 0x40000000 /* End of frame */
|
||||
#define BGMAC_DESC_CTL0_SOF 0x80000000 /* Start of frame */
|
||||
#define BGMAC_DESC_CTL1_LEN 0x00001FFF
|
||||
#define BGMAC_DESC_CTL1_LEN 0x00003FFF
|
||||
|
||||
#define BGMAC_PHY_NOREGS BRCM_PSEUDO_PHY_ADDR
|
||||
#define BGMAC_PHY_MASK 0x1F
|
||||
|
|
@ -366,7 +366,8 @@
|
|||
#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
|
||||
#define BGMAC_RX_BUF_OFFSET (NET_SKB_PAD + NET_IP_ALIGN - \
|
||||
BGMAC_RX_FRAME_OFFSET)
|
||||
#define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */
|
||||
/* Jumbo frame size with FCS */
|
||||
#define BGMAC_RX_MAX_FRAME_SIZE 9724
|
||||
#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
|
||||
#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \
|
||||
SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
|
||||
|
|
|
|||
|
|
@ -2185,13 +2185,25 @@ static int ocelot_init_timestamp(struct ocelot *ocelot)
|
|||
|
||||
/* Configure the maximum SDU (L2 payload) on RX to the value specified in @sdu.
|
||||
* The length of VLAN tags is accounted for automatically via DEV_MAC_TAGS_CFG.
|
||||
* In the special case that it's the NPI port that we're configuring, the
|
||||
* length of the tag and optional prefix needs to be accounted for privately,
|
||||
* in order to be able to sustain communication at the requested @sdu.
|
||||
*/
|
||||
static void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
|
||||
void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
|
||||
{
|
||||
struct ocelot_port *ocelot_port = ocelot->ports[port];
|
||||
int maxlen = sdu + ETH_HLEN + ETH_FCS_LEN;
|
||||
int atop_wm;
|
||||
|
||||
if (port == ocelot->npi) {
|
||||
maxlen += OCELOT_TAG_LEN;
|
||||
|
||||
if (ocelot->inj_prefix == OCELOT_TAG_PREFIX_SHORT)
|
||||
maxlen += OCELOT_SHORT_PREFIX_LEN;
|
||||
else if (ocelot->inj_prefix == OCELOT_TAG_PREFIX_LONG)
|
||||
maxlen += OCELOT_LONG_PREFIX_LEN;
|
||||
}
|
||||
|
||||
ocelot_port_writel(ocelot_port, maxlen, DEV_MAC_MAXLEN_CFG);
|
||||
|
||||
/* Set Pause WM hysteresis
|
||||
|
|
@ -2209,6 +2221,24 @@ static void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
|
|||
SYS_ATOP, port);
|
||||
ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
|
||||
}
|
||||
EXPORT_SYMBOL(ocelot_port_set_maxlen);
|
||||
|
||||
int ocelot_get_max_mtu(struct ocelot *ocelot, int port)
|
||||
{
|
||||
int max_mtu = 65535 - ETH_HLEN - ETH_FCS_LEN;
|
||||
|
||||
if (port == ocelot->npi) {
|
||||
max_mtu -= OCELOT_TAG_LEN;
|
||||
|
||||
if (ocelot->inj_prefix == OCELOT_TAG_PREFIX_SHORT)
|
||||
max_mtu -= OCELOT_SHORT_PREFIX_LEN;
|
||||
else if (ocelot->inj_prefix == OCELOT_TAG_PREFIX_LONG)
|
||||
max_mtu -= OCELOT_LONG_PREFIX_LEN;
|
||||
}
|
||||
|
||||
return max_mtu;
|
||||
}
|
||||
EXPORT_SYMBOL(ocelot_get_max_mtu);
|
||||
|
||||
void ocelot_init_port(struct ocelot *ocelot, int port)
|
||||
{
|
||||
|
|
@ -2318,6 +2348,10 @@ void ocelot_configure_cpu(struct ocelot *ocelot, int npi,
|
|||
{
|
||||
int cpu = ocelot->num_phys_ports;
|
||||
|
||||
ocelot->npi = npi;
|
||||
ocelot->inj_prefix = injection;
|
||||
ocelot->xtr_prefix = extraction;
|
||||
|
||||
/* The unicast destination PGID for the CPU port module is unused */
|
||||
ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, cpu);
|
||||
/* Instead set up a multicast destination PGID for traffic copied to
|
||||
|
|
@ -2330,19 +2364,10 @@ void ocelot_configure_cpu(struct ocelot *ocelot, int npi,
|
|||
ANA_PORT_PORT_CFG, cpu);
|
||||
|
||||
if (npi >= 0 && npi < ocelot->num_phys_ports) {
|
||||
int sdu = ETH_DATA_LEN + OCELOT_TAG_LEN;
|
||||
|
||||
ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
|
||||
QSYS_EXT_CPU_CFG_EXT_CPU_PORT(npi),
|
||||
QSYS_EXT_CPU_CFG);
|
||||
|
||||
if (injection == OCELOT_TAG_PREFIX_SHORT)
|
||||
sdu += OCELOT_SHORT_PREFIX_LEN;
|
||||
else if (injection == OCELOT_TAG_PREFIX_LONG)
|
||||
sdu += OCELOT_LONG_PREFIX_LEN;
|
||||
|
||||
ocelot_port_set_maxlen(ocelot, npi, sdu);
|
||||
|
||||
/* Enable NPI port */
|
||||
ocelot_write_rix(ocelot,
|
||||
QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
|
||||
|
|
|
|||
|
|
@ -423,6 +423,28 @@ int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev)
|
|||
}
|
||||
EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init);
|
||||
|
||||
int bcm_phy_enable_jumbo(struct phy_device *phydev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Enable extended length packet reception */
|
||||
ret = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
|
||||
ret | MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Enable the elastic FIFO for raising the transmission limit from
|
||||
* 4.5KB to 10KB, at the expense of an additional 16 ns in propagation
|
||||
* latency.
|
||||
*/
|
||||
return phy_set_bits(phydev, MII_BCM54XX_ECR, MII_BCM54XX_ECR_FIFOE);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(bcm_phy_enable_jumbo);
|
||||
|
||||
MODULE_DESCRIPTION("Broadcom PHY Library");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_AUTHOR("Broadcom Corporation");
|
||||
|
|
|
|||
|
|
@ -65,5 +65,6 @@ void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
|
|||
struct ethtool_stats *stats, u64 *data);
|
||||
void bcm_phy_r_rc_cal_reset(struct phy_device *phydev);
|
||||
int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev);
|
||||
int bcm_phy_enable_jumbo(struct phy_device *phydev);
|
||||
|
||||
#endif /* _LINUX_BCM_PHY_LIB_H */
|
||||
|
|
|
|||
|
|
@ -178,6 +178,10 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
|
|||
break;
|
||||
}
|
||||
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = bcm_phy_enable_jumbo(phydev);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
|
|
|
|||
|
|
@ -79,6 +79,7 @@
|
|||
#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */
|
||||
#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */
|
||||
#define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */
|
||||
#define MII_BCM54XX_ECR_FIFOE 0x0001 /* FIFO elasticity */
|
||||
|
||||
#define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */
|
||||
#define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */
|
||||
|
|
@ -119,6 +120,7 @@
|
|||
#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00
|
||||
#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400
|
||||
#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800
|
||||
#define MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN 0x4000
|
||||
|
||||
#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07
|
||||
#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010
|
||||
|
|
|
|||
|
|
@ -284,6 +284,12 @@ struct dsa_switch {
|
|||
*/
|
||||
bool pcs_poll;
|
||||
|
||||
/* For switches that only have the MRU configurable. To ensure the
|
||||
* configured MTU is not exceeded, normalization of MRU on all bridged
|
||||
* interfaces is needed.
|
||||
*/
|
||||
bool mtu_enforcement_ingress;
|
||||
|
||||
size_t num_ports;
|
||||
};
|
||||
|
||||
|
|
@ -579,6 +585,16 @@ struct dsa_switch_ops {
|
|||
struct devlink_param_gset_ctx *ctx);
|
||||
int (*devlink_param_set)(struct dsa_switch *ds, u32 id,
|
||||
struct devlink_param_gset_ctx *ctx);
|
||||
|
||||
/*
|
||||
* MTU change functionality. Switches can also adjust their MRU through
|
||||
* this method. By MTU, one understands the SDU (L2 payload) length.
|
||||
* If the switch needs to account for the DSA tag on the CPU port, this
|
||||
* method needs to to do so privately.
|
||||
*/
|
||||
int (*port_change_mtu)(struct dsa_switch *ds, int port,
|
||||
int new_mtu);
|
||||
int (*port_max_mtu)(struct dsa_switch *ds, int port);
|
||||
};
|
||||
|
||||
#define DSA_DEVLINK_PARAM_DRIVER(_id, _name, _type, _cmodes) \
|
||||
|
|
|
|||
|
|
@ -517,6 +517,11 @@ struct ocelot {
|
|||
*/
|
||||
u8 num_phys_ports;
|
||||
|
||||
int npi;
|
||||
|
||||
enum ocelot_tag_prefix inj_prefix;
|
||||
enum ocelot_tag_prefix xtr_prefix;
|
||||
|
||||
u32 *lags;
|
||||
|
||||
struct list_head multicast;
|
||||
|
|
@ -611,6 +616,8 @@ int ocelot_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts);
|
|||
int ocelot_port_add_txtstamp_skb(struct ocelot_port *ocelot_port,
|
||||
struct sk_buff *skb);
|
||||
void ocelot_get_txtstamp(struct ocelot *ocelot);
|
||||
void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu);
|
||||
int ocelot_get_max_mtu(struct ocelot *ocelot, int port);
|
||||
int ocelot_cls_flower_replace(struct ocelot *ocelot, int port,
|
||||
struct flow_cls_offload *f, bool ingress);
|
||||
int ocelot_cls_flower_destroy(struct ocelot *ocelot, int port,
|
||||
|
|
|
|||
|
|
@ -18,8 +18,8 @@
|
|||
|
||||
#include "dsa_priv.h"
|
||||
|
||||
static LIST_HEAD(dsa_tree_list);
|
||||
static DEFINE_MUTEX(dsa2_mutex);
|
||||
LIST_HEAD(dsa_tree_list);
|
||||
|
||||
static const struct devlink_ops dsa_devlink_ops = {
|
||||
};
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@ enum {
|
|||
DSA_NOTIFIER_MDB_DEL,
|
||||
DSA_NOTIFIER_VLAN_ADD,
|
||||
DSA_NOTIFIER_VLAN_DEL,
|
||||
DSA_NOTIFIER_MTU,
|
||||
};
|
||||
|
||||
/* DSA_NOTIFIER_AGEING_TIME */
|
||||
|
|
@ -61,6 +62,14 @@ struct dsa_notifier_vlan_info {
|
|||
int port;
|
||||
};
|
||||
|
||||
/* DSA_NOTIFIER_MTU */
|
||||
struct dsa_notifier_mtu_info {
|
||||
bool propagate_upstream;
|
||||
int sw_index;
|
||||
int port;
|
||||
int mtu;
|
||||
};
|
||||
|
||||
struct dsa_slave_priv {
|
||||
/* Copy of CPU port xmit for faster access in slave transmit hot path */
|
||||
struct sk_buff * (*xmit)(struct sk_buff *skb,
|
||||
|
|
@ -127,6 +136,8 @@ int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering,
|
|||
struct switchdev_trans *trans);
|
||||
int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock,
|
||||
struct switchdev_trans *trans);
|
||||
int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu,
|
||||
bool propagate_upstream);
|
||||
int dsa_port_fdb_add(struct dsa_port *dp, const unsigned char *addr,
|
||||
u16 vid);
|
||||
int dsa_port_fdb_del(struct dsa_port *dp, const unsigned char *addr,
|
||||
|
|
@ -183,4 +194,8 @@ dsa_slave_to_master(const struct net_device *dev)
|
|||
/* switch.c */
|
||||
int dsa_switch_register_notifier(struct dsa_switch *ds);
|
||||
void dsa_switch_unregister_notifier(struct dsa_switch *ds);
|
||||
|
||||
/* dsa2.c */
|
||||
extern struct list_head dsa_tree_list;
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -314,20 +314,6 @@ static const struct attribute_group dsa_group = {
|
|||
.attrs = dsa_slave_attrs,
|
||||
};
|
||||
|
||||
static void dsa_master_set_mtu(struct net_device *dev, struct dsa_port *cpu_dp)
|
||||
{
|
||||
unsigned int mtu = ETH_DATA_LEN + cpu_dp->tag_ops->overhead;
|
||||
int err;
|
||||
|
||||
rtnl_lock();
|
||||
if (mtu <= dev->max_mtu) {
|
||||
err = dev_set_mtu(dev, mtu);
|
||||
if (err)
|
||||
netdev_dbg(dev, "Unable to set MTU to include for DSA overheads\n");
|
||||
}
|
||||
rtnl_unlock();
|
||||
}
|
||||
|
||||
static void dsa_master_reset_mtu(struct net_device *dev)
|
||||
{
|
||||
int err;
|
||||
|
|
@ -344,7 +330,12 @@ int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp)
|
|||
{
|
||||
int ret;
|
||||
|
||||
dsa_master_set_mtu(dev, cpu_dp);
|
||||
rtnl_lock();
|
||||
ret = dev_set_mtu(dev, ETH_DATA_LEN + cpu_dp->tag_ops->overhead);
|
||||
rtnl_unlock();
|
||||
if (ret)
|
||||
netdev_warn(dev, "error %d setting MTU to include DSA overhead\n",
|
||||
ret);
|
||||
|
||||
/* If we use a tagging format that doesn't have an ethertype
|
||||
* field, make sure that all packets from this point on get
|
||||
|
|
|
|||
|
|
@ -297,6 +297,19 @@ int dsa_port_mrouter(struct dsa_port *dp, bool mrouter,
|
|||
return ds->ops->port_egress_floods(ds, port, true, mrouter);
|
||||
}
|
||||
|
||||
int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu,
|
||||
bool propagate_upstream)
|
||||
{
|
||||
struct dsa_notifier_mtu_info info = {
|
||||
.sw_index = dp->ds->index,
|
||||
.propagate_upstream = propagate_upstream,
|
||||
.port = dp->index,
|
||||
.mtu = new_mtu,
|
||||
};
|
||||
|
||||
return dsa_port_notify(dp, DSA_NOTIFIER_MTU, &info);
|
||||
}
|
||||
|
||||
int dsa_port_fdb_add(struct dsa_port *dp, const unsigned char *addr,
|
||||
u16 vid)
|
||||
{
|
||||
|
|
|
|||
219
net/dsa/slave.c
219
net/dsa/slave.c
|
|
@ -1218,6 +1218,208 @@ static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
|
|||
return dsa_port_vid_del(dp, vid);
|
||||
}
|
||||
|
||||
struct dsa_hw_port {
|
||||
struct list_head list;
|
||||
struct net_device *dev;
|
||||
int old_mtu;
|
||||
};
|
||||
|
||||
static int dsa_hw_port_list_set_mtu(struct list_head *hw_port_list, int mtu)
|
||||
{
|
||||
const struct dsa_hw_port *p;
|
||||
int err;
|
||||
|
||||
list_for_each_entry(p, hw_port_list, list) {
|
||||
if (p->dev->mtu == mtu)
|
||||
continue;
|
||||
|
||||
err = dev_set_mtu(p->dev, mtu);
|
||||
if (err)
|
||||
goto rollback;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
rollback:
|
||||
list_for_each_entry_continue_reverse(p, hw_port_list, list) {
|
||||
if (p->dev->mtu == p->old_mtu)
|
||||
continue;
|
||||
|
||||
if (dev_set_mtu(p->dev, p->old_mtu))
|
||||
netdev_err(p->dev, "Failed to restore MTU\n");
|
||||
}
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static void dsa_hw_port_list_free(struct list_head *hw_port_list)
|
||||
{
|
||||
struct dsa_hw_port *p, *n;
|
||||
|
||||
list_for_each_entry_safe(p, n, hw_port_list, list)
|
||||
kfree(p);
|
||||
}
|
||||
|
||||
/* Make the hardware datapath to/from @dev limited to a common MTU */
|
||||
void dsa_bridge_mtu_normalization(struct dsa_port *dp)
|
||||
{
|
||||
struct list_head hw_port_list;
|
||||
struct dsa_switch_tree *dst;
|
||||
int min_mtu = ETH_MAX_MTU;
|
||||
struct dsa_port *other_dp;
|
||||
int err;
|
||||
|
||||
if (!dp->ds->mtu_enforcement_ingress)
|
||||
return;
|
||||
|
||||
if (!dp->bridge_dev)
|
||||
return;
|
||||
|
||||
INIT_LIST_HEAD(&hw_port_list);
|
||||
|
||||
/* Populate the list of ports that are part of the same bridge
|
||||
* as the newly added/modified port
|
||||
*/
|
||||
list_for_each_entry(dst, &dsa_tree_list, list) {
|
||||
list_for_each_entry(other_dp, &dst->ports, list) {
|
||||
struct dsa_hw_port *hw_port;
|
||||
struct net_device *slave;
|
||||
|
||||
if (other_dp->type != DSA_PORT_TYPE_USER)
|
||||
continue;
|
||||
|
||||
if (other_dp->bridge_dev != dp->bridge_dev)
|
||||
continue;
|
||||
|
||||
if (!other_dp->ds->mtu_enforcement_ingress)
|
||||
continue;
|
||||
|
||||
slave = other_dp->slave;
|
||||
|
||||
if (min_mtu > slave->mtu)
|
||||
min_mtu = slave->mtu;
|
||||
|
||||
hw_port = kzalloc(sizeof(*hw_port), GFP_KERNEL);
|
||||
if (!hw_port)
|
||||
goto out;
|
||||
|
||||
hw_port->dev = slave;
|
||||
hw_port->old_mtu = slave->mtu;
|
||||
|
||||
list_add(&hw_port->list, &hw_port_list);
|
||||
}
|
||||
}
|
||||
|
||||
/* Attempt to configure the entire hardware bridge to the newly added
|
||||
* interface's MTU first, regardless of whether the intention of the
|
||||
* user was to raise or lower it.
|
||||
*/
|
||||
err = dsa_hw_port_list_set_mtu(&hw_port_list, dp->slave->mtu);
|
||||
if (!err)
|
||||
goto out;
|
||||
|
||||
/* Clearly that didn't work out so well, so just set the minimum MTU on
|
||||
* all hardware bridge ports now. If this fails too, then all ports will
|
||||
* still have their old MTU rolled back anyway.
|
||||
*/
|
||||
dsa_hw_port_list_set_mtu(&hw_port_list, min_mtu);
|
||||
|
||||
out:
|
||||
dsa_hw_port_list_free(&hw_port_list);
|
||||
}
|
||||
|
||||
static int dsa_slave_change_mtu(struct net_device *dev, int new_mtu)
|
||||
{
|
||||
struct net_device *master = dsa_slave_to_master(dev);
|
||||
struct dsa_port *dp = dsa_slave_to_port(dev);
|
||||
struct dsa_slave_priv *p = netdev_priv(dev);
|
||||
struct dsa_switch *ds = p->dp->ds;
|
||||
struct dsa_port *cpu_dp;
|
||||
int port = p->dp->index;
|
||||
int largest_mtu = 0;
|
||||
int new_master_mtu;
|
||||
int old_master_mtu;
|
||||
int mtu_limit;
|
||||
int cpu_mtu;
|
||||
int err, i;
|
||||
|
||||
if (!ds->ops->port_change_mtu)
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
for (i = 0; i < ds->num_ports; i++) {
|
||||
int slave_mtu;
|
||||
|
||||
if (!dsa_is_user_port(ds, i))
|
||||
continue;
|
||||
|
||||
/* During probe, this function will be called for each slave
|
||||
* device, while not all of them have been allocated. That's
|
||||
* ok, it doesn't change what the maximum is, so ignore it.
|
||||
*/
|
||||
if (!dsa_to_port(ds, i)->slave)
|
||||
continue;
|
||||
|
||||
/* Pretend that we already applied the setting, which we
|
||||
* actually haven't (still haven't done all integrity checks)
|
||||
*/
|
||||
if (i == port)
|
||||
slave_mtu = new_mtu;
|
||||
else
|
||||
slave_mtu = dsa_to_port(ds, i)->slave->mtu;
|
||||
|
||||
if (largest_mtu < slave_mtu)
|
||||
largest_mtu = slave_mtu;
|
||||
}
|
||||
|
||||
cpu_dp = dsa_to_port(ds, port)->cpu_dp;
|
||||
|
||||
mtu_limit = min_t(int, master->max_mtu, dev->max_mtu);
|
||||
old_master_mtu = master->mtu;
|
||||
new_master_mtu = largest_mtu + cpu_dp->tag_ops->overhead;
|
||||
if (new_master_mtu > mtu_limit)
|
||||
return -ERANGE;
|
||||
|
||||
/* If the master MTU isn't over limit, there's no need to check the CPU
|
||||
* MTU, since that surely isn't either.
|
||||
*/
|
||||
cpu_mtu = largest_mtu;
|
||||
|
||||
/* Start applying stuff */
|
||||
if (new_master_mtu != old_master_mtu) {
|
||||
err = dev_set_mtu(master, new_master_mtu);
|
||||
if (err < 0)
|
||||
goto out_master_failed;
|
||||
|
||||
/* We only need to propagate the MTU of the CPU port to
|
||||
* upstream switches.
|
||||
*/
|
||||
err = dsa_port_mtu_change(cpu_dp, cpu_mtu, true);
|
||||
if (err)
|
||||
goto out_cpu_failed;
|
||||
}
|
||||
|
||||
err = dsa_port_mtu_change(dp, new_mtu, false);
|
||||
if (err)
|
||||
goto out_port_failed;
|
||||
|
||||
dev->mtu = new_mtu;
|
||||
|
||||
dsa_bridge_mtu_normalization(dp);
|
||||
|
||||
return 0;
|
||||
|
||||
out_port_failed:
|
||||
if (new_master_mtu != old_master_mtu)
|
||||
dsa_port_mtu_change(cpu_dp, old_master_mtu -
|
||||
cpu_dp->tag_ops->overhead,
|
||||
true);
|
||||
out_cpu_failed:
|
||||
if (new_master_mtu != old_master_mtu)
|
||||
dev_set_mtu(master, old_master_mtu);
|
||||
out_master_failed:
|
||||
return err;
|
||||
}
|
||||
|
||||
static const struct ethtool_ops dsa_slave_ethtool_ops = {
|
||||
.get_drvinfo = dsa_slave_get_drvinfo,
|
||||
.get_regs_len = dsa_slave_get_regs_len,
|
||||
|
|
@ -1295,6 +1497,7 @@ static const struct net_device_ops dsa_slave_netdev_ops = {
|
|||
.ndo_vlan_rx_add_vid = dsa_slave_vlan_rx_add_vid,
|
||||
.ndo_vlan_rx_kill_vid = dsa_slave_vlan_rx_kill_vid,
|
||||
.ndo_get_devlink_port = dsa_slave_get_devlink_port,
|
||||
.ndo_change_mtu = dsa_slave_change_mtu,
|
||||
};
|
||||
|
||||
static struct device_type dsa_type = {
|
||||
|
|
@ -1465,7 +1668,10 @@ int dsa_slave_create(struct dsa_port *port)
|
|||
slave_dev->priv_flags |= IFF_NO_QUEUE;
|
||||
slave_dev->netdev_ops = &dsa_slave_netdev_ops;
|
||||
slave_dev->min_mtu = 0;
|
||||
slave_dev->max_mtu = ETH_MAX_MTU;
|
||||
if (ds->ops->port_max_mtu)
|
||||
slave_dev->max_mtu = ds->ops->port_max_mtu(ds, port->index);
|
||||
else
|
||||
slave_dev->max_mtu = ETH_MAX_MTU;
|
||||
SET_NETDEV_DEVTYPE(slave_dev, &dsa_type);
|
||||
|
||||
SET_NETDEV_DEV(slave_dev, port->ds->dev);
|
||||
|
|
@ -1483,6 +1689,15 @@ int dsa_slave_create(struct dsa_port *port)
|
|||
p->xmit = cpu_dp->tag_ops->xmit;
|
||||
port->slave = slave_dev;
|
||||
|
||||
rtnl_lock();
|
||||
ret = dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN);
|
||||
rtnl_unlock();
|
||||
if (ret && ret != -EOPNOTSUPP) {
|
||||
dev_err(ds->dev, "error %d setting MTU on port %d\n",
|
||||
ret, port->index);
|
||||
goto out_free;
|
||||
}
|
||||
|
||||
netif_carrier_off(slave_dev);
|
||||
|
||||
ret = dsa_slave_phy_setup(slave_dev);
|
||||
|
|
@ -1545,6 +1760,8 @@ static int dsa_slave_changeupper(struct net_device *dev,
|
|||
if (netif_is_bridge_master(info->upper_dev)) {
|
||||
if (info->linking) {
|
||||
err = dsa_port_bridge_join(dp, info->upper_dev);
|
||||
if (!err)
|
||||
dsa_bridge_mtu_normalization(dp);
|
||||
err = notifier_from_errno(err);
|
||||
} else {
|
||||
dsa_port_bridge_leave(dp, info->upper_dev);
|
||||
|
|
|
|||
|
|
@ -52,6 +52,40 @@ static int dsa_switch_ageing_time(struct dsa_switch *ds,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static bool dsa_switch_mtu_match(struct dsa_switch *ds, int port,
|
||||
struct dsa_notifier_mtu_info *info)
|
||||
{
|
||||
if (ds->index == info->sw_index)
|
||||
return (port == info->port) || dsa_is_dsa_port(ds, port);
|
||||
|
||||
if (!info->propagate_upstream)
|
||||
return false;
|
||||
|
||||
if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
|
||||
return true;
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
static int dsa_switch_mtu(struct dsa_switch *ds,
|
||||
struct dsa_notifier_mtu_info *info)
|
||||
{
|
||||
int port, ret;
|
||||
|
||||
if (!ds->ops->port_change_mtu)
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
for (port = 0; port < ds->num_ports; port++) {
|
||||
if (dsa_switch_mtu_match(ds, port, info)) {
|
||||
ret = ds->ops->port_change_mtu(ds, port, info->mtu);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dsa_switch_bridge_join(struct dsa_switch *ds,
|
||||
struct dsa_notifier_bridge_info *info)
|
||||
{
|
||||
|
|
@ -328,6 +362,9 @@ static int dsa_switch_event(struct notifier_block *nb,
|
|||
case DSA_NOTIFIER_VLAN_DEL:
|
||||
err = dsa_switch_vlan_del(ds, info);
|
||||
break;
|
||||
case DSA_NOTIFIER_MTU:
|
||||
err = dsa_switch_mtu(ds, info);
|
||||
break;
|
||||
default:
|
||||
err = -EOPNOTSUPP;
|
||||
break;
|
||||
|
|
|
|||
Loading…
Reference in New Issue