mirror of https://gitee.com/openkylin/linux.git
mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support
GL9763E supports High Speed SDR, High Speed DDR, HS200, HS400, Enhanced Strobe in HS400 mode, 1/4/8 bits data bus and 3.3/1.8V. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20200508064154.13473-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
parent
1be64c7963
commit
1ae1d2d6e5
|
@ -1745,6 +1745,7 @@ static const struct pci_device_id pci_ids[] = {
|
|||
SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
|
||||
SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
|
||||
SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
|
||||
SDHCI_PCI_DEVICE(GLI, 9763E, gl9763e),
|
||||
SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
|
||||
/* Generic SD host controller */
|
||||
{PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
|
||||
|
|
|
@ -63,6 +63,19 @@
|
|||
#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0)
|
||||
#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1
|
||||
|
||||
#define SDHCI_GLI_9763E_CTRL_HS400 0x7
|
||||
|
||||
#define SDHCI_GLI_9763E_HS400_ES_REG 0x52C
|
||||
#define SDHCI_GLI_9763E_HS400_ES_BIT BIT(8)
|
||||
|
||||
#define PCIE_GLI_9763E_VHS 0x884
|
||||
#define GLI_9763E_VHS_REV GENMASK(19, 16)
|
||||
#define GLI_9763E_VHS_REV_R 0x0
|
||||
#define GLI_9763E_VHS_REV_M 0x1
|
||||
#define GLI_9763E_VHS_REV_W 0x2
|
||||
#define PCIE_GLI_9763E_SCR 0x8E0
|
||||
#define GLI_9763E_SCR_AXI_REQ BIT(9)
|
||||
|
||||
#define GLI_MAX_TUNING_LOOP 40
|
||||
|
||||
/* Genesys Logic chipset */
|
||||
|
@ -351,6 +364,81 @@ static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip)
|
|||
}
|
||||
#endif
|
||||
|
||||
static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc,
|
||||
struct mmc_ios *ios)
|
||||
{
|
||||
struct sdhci_host *host = mmc_priv(mmc);
|
||||
u32 val;
|
||||
|
||||
val = sdhci_readl(host, SDHCI_GLI_9763E_HS400_ES_REG);
|
||||
if (ios->enhanced_strobe)
|
||||
val |= SDHCI_GLI_9763E_HS400_ES_BIT;
|
||||
else
|
||||
val &= ~SDHCI_GLI_9763E_HS400_ES_BIT;
|
||||
|
||||
sdhci_writel(host, val, SDHCI_GLI_9763E_HS400_ES_REG);
|
||||
}
|
||||
|
||||
static void sdhci_set_gl9763e_signaling(struct sdhci_host *host,
|
||||
unsigned int timing)
|
||||
{
|
||||
u16 ctrl_2;
|
||||
|
||||
ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
||||
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
|
||||
if (timing == MMC_TIMING_MMC_HS200)
|
||||
ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
|
||||
else if (timing == MMC_TIMING_MMC_HS)
|
||||
ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
|
||||
else if (timing == MMC_TIMING_MMC_DDR52)
|
||||
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
|
||||
else if (timing == MMC_TIMING_MMC_HS400)
|
||||
ctrl_2 |= SDHCI_GLI_9763E_CTRL_HS400;
|
||||
|
||||
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
|
||||
}
|
||||
|
||||
static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
|
||||
{
|
||||
struct pci_dev *pdev = slot->chip->pdev;
|
||||
u32 value;
|
||||
|
||||
pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
|
||||
value &= ~GLI_9763E_VHS_REV;
|
||||
value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
|
||||
pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
|
||||
|
||||
pci_read_config_dword(pdev, PCIE_GLI_9763E_SCR, &value);
|
||||
value |= GLI_9763E_SCR_AXI_REQ;
|
||||
pci_write_config_dword(pdev, PCIE_GLI_9763E_SCR, value);
|
||||
|
||||
pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
|
||||
value &= ~GLI_9763E_VHS_REV;
|
||||
value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
|
||||
pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
|
||||
}
|
||||
|
||||
static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
|
||||
{
|
||||
struct sdhci_host *host = slot->host;
|
||||
|
||||
host->mmc->caps |= MMC_CAP_8_BIT_DATA |
|
||||
MMC_CAP_1_8V_DDR |
|
||||
MMC_CAP_NONREMOVABLE;
|
||||
host->mmc->caps2 |= MMC_CAP2_HS200_1_8V_SDR |
|
||||
MMC_CAP2_HS400_1_8V |
|
||||
MMC_CAP2_HS400_ES |
|
||||
MMC_CAP2_NO_SDIO |
|
||||
MMC_CAP2_NO_SD;
|
||||
gli_pcie_enable_msi(slot);
|
||||
host->mmc_host_ops.hs400_enhanced_strobe =
|
||||
gl9763e_hs400_enhanced_strobe;
|
||||
gli_set_gl9763e(slot);
|
||||
sdhci_enable_v4_mode(host);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct sdhci_ops sdhci_gl9755_ops = {
|
||||
.set_clock = sdhci_set_clock,
|
||||
.enable_dma = sdhci_pci_enable_dma,
|
||||
|
@ -390,3 +478,21 @@ const struct sdhci_pci_fixes sdhci_gl9750 = {
|
|||
.resume = sdhci_pci_gli_resume,
|
||||
#endif
|
||||
};
|
||||
|
||||
static const struct sdhci_ops sdhci_gl9763e_ops = {
|
||||
.set_clock = sdhci_set_clock,
|
||||
.enable_dma = sdhci_pci_enable_dma,
|
||||
.set_bus_width = sdhci_set_bus_width,
|
||||
.reset = sdhci_reset,
|
||||
.set_uhs_signaling = sdhci_set_gl9763e_signaling,
|
||||
.voltage_switch = sdhci_gli_voltage_switch,
|
||||
};
|
||||
|
||||
const struct sdhci_pci_fixes sdhci_gl9763e = {
|
||||
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
||||
.probe_slot = gli_probe_slot_gl9763e,
|
||||
.ops = &sdhci_gl9763e_ops,
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
.resume = sdhci_pci_gli_resume,
|
||||
#endif
|
||||
};
|
||||
|
|
|
@ -72,6 +72,7 @@
|
|||
|
||||
#define PCI_DEVICE_ID_GLI_9755 0x9755
|
||||
#define PCI_DEVICE_ID_GLI_9750 0x9750
|
||||
#define PCI_DEVICE_ID_GLI_9763E 0xe763
|
||||
|
||||
/*
|
||||
* PCI device class and mask
|
||||
|
@ -195,5 +196,6 @@ extern const struct sdhci_pci_fixes sdhci_snps;
|
|||
extern const struct sdhci_pci_fixes sdhci_o2;
|
||||
extern const struct sdhci_pci_fixes sdhci_gl9750;
|
||||
extern const struct sdhci_pci_fixes sdhci_gl9755;
|
||||
extern const struct sdhci_pci_fixes sdhci_gl9763e;
|
||||
|
||||
#endif /* __SDHCI_PCI_H */
|
||||
|
|
Loading…
Reference in New Issue