mirror of https://gitee.com/openkylin/linux.git
arm64: tegra: Add regulators for Tegra210 Smaug
Add regulators to the Tegra210 Smaug DTS file including support for the MAX77620 PMIC. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
This commit is contained in:
Rhyland Klein
Thierry Reding
parent
9168e1db75
commit
1b4c842022
|
|
@ -1,6 +1,7 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/mfd/max77620.h>
|
||||
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
|
||||
|
||||
#include "tegra210.dtsi"
|
||||
|
|
@ -1327,6 +1328,234 @@ battery: bq27742@55 {
|
|||
};
|
||||
};
|
||||
|
||||
i2c@7000d000 {
|
||||
status = "okay";
|
||||
clock-frequency = <1000000>;
|
||||
|
||||
max77620: max77620@3c {
|
||||
compatible = "maxim,max77620";
|
||||
reg = <0x3c>;
|
||||
interrupts = <0 86 IRQ_TYPE_NONE>;
|
||||
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&max77620_default>;
|
||||
|
||||
max77620_default: pinmux@0 {
|
||||
pin_gpio {
|
||||
pins = "gpio0", "gpio1", "gpio2", "gpio7";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
/*
|
||||
* GPIO3 is used to en_pp3300, and it is part of power
|
||||
* sequence, So it must be sequenced up (automatically
|
||||
* set by OTP) and down properly.
|
||||
*/
|
||||
pin_gpio3 {
|
||||
pins = "gpio3";
|
||||
function = "fps-out";
|
||||
drive-open-drain = <1>;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||||
maxim,active-fps-power-up-slot = <4>;
|
||||
maxim,active-fps-power-down-slot = <2>;
|
||||
};
|
||||
|
||||
pin_gpio5_6 {
|
||||
pins = "gpio5", "gpio6";
|
||||
function = "gpio";
|
||||
drive-push-pull = <1>;
|
||||
};
|
||||
|
||||
pin_32k {
|
||||
pins = "gpio4";
|
||||
function = "32k-out1";
|
||||
};
|
||||
};
|
||||
|
||||
fps {
|
||||
fps0 {
|
||||
maxim,shutdown-fps-time-period-us = <5120>;
|
||||
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
|
||||
};
|
||||
|
||||
fps1 {
|
||||
maxim,shutdown-fps-time-period-us = <5120>;
|
||||
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
|
||||
maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
|
||||
};
|
||||
|
||||
fps2 {
|
||||
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
in-ldo0-1-supply = <&pp1350>;
|
||||
in-ldo2-supply = <&pp3300>;
|
||||
in-ldo3-5-supply = <&pp3300>;
|
||||
in-ldo7-8-supply = <&pp1350>;
|
||||
|
||||
ppvar_soc: sd0 {
|
||||
regulator-name = "PPVAR_SOC";
|
||||
regulator-min-microvolt = <825000>;
|
||||
regulator-max-microvolt = <1125000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||||
maxim,active-fps-power-up-slot = <1>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
pp1100_sd1: sd1 {
|
||||
regulator-name = "PP1100";
|
||||
regulator-min-microvolt = <1125000>;
|
||||
regulator-max-microvolt = <1125000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||||
maxim,active-fps-power-up-slot = <5>;
|
||||
maxim,active-fps-power-down-slot = <1>;
|
||||
};
|
||||
|
||||
pp1350: sd2 {
|
||||
regulator-name = "PP1350";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <2>;
|
||||
maxim,active-fps-power-down-slot = <5>;
|
||||
};
|
||||
|
||||
pp1800: sd3 {
|
||||
regulator-name = "PP1800";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||||
maxim,active-fps-power-up-slot = <3>;
|
||||
maxim,active-fps-power-down-slot = <3>;
|
||||
};
|
||||
|
||||
pp1200_avdd: ldo0 {
|
||||
regulator-name = "PP1200_AVDD";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-enable-ramp-delay = <26>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
regulator-boot-on;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
pp1200_rcam: ldo1 {
|
||||
regulator-name = "PP1200_RCAM";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-enable-ramp-delay = <22>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
pp_ldo2: ldo2 {
|
||||
regulator-name = "PP_LDO2";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <62>;
|
||||
regulator-ramp-delay = <11000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
pp2800l_rcam: ldo3 {
|
||||
regulator-name = "PP2800L_RCAM";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-enable-ramp-delay = <50>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
pp100_soc_rtc: ldo4 {
|
||||
regulator-name = "PP1100_SOC_RTC";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-enable-ramp-delay = <22>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
regulator-always-on; /* Check this */
|
||||
regulator-boot-on;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||||
maxim,active-fps-power-up-slot = <1>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
pp2800l_fcam: ldo5 {
|
||||
regulator-name = "PP2800L_FCAM";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-enable-ramp-delay = <62>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
ldo6 {
|
||||
/* Unused. */
|
||||
regulator-name = "PP_LDO6";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <36>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
|
||||
pp1050_avdd: ldo7 {
|
||||
regulator-name = "PP1050_AVDD";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-enable-ramp-delay = <24>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||||
maxim,active-fps-power-up-slot = <3>;
|
||||
maxim,active-fps-power-down-slot = <4>;
|
||||
};
|
||||
|
||||
avddio_1v05: ldo8 {
|
||||
regulator-name = "AVDDIO_1V05";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-enable-ramp-delay = <22>;
|
||||
regulator-ramp-delay = <100000>;
|
||||
regulator-boot-on;
|
||||
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||||
maxim,active-fps-power-up-slot = <0>;
|
||||
maxim,active-fps-power-down-slot = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmc@7000e400 {
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <0>;
|
||||
|
|
@ -1421,4 +1650,89 @@ psci {
|
|||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
device_type = "fixed-regulators";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ppvar_sys: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "PPVAR_SYS";
|
||||
regulator-min-microvolt = <4400000>;
|
||||
regulator-max-microvolt = <4400000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pplcd_vdd: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "PPLCD_VDD";
|
||||
regulator-min-microvolt = <4400000>;
|
||||
regulator-max-microvolt = <4400000>;
|
||||
gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pp3000_always: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "PP3000_ALWAYS";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pp3300: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "PP3300";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
pp5000: regulator@4 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <4>;
|
||||
regulator-name = "PP5000";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pp1800_lcdio: regulator@5 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <5>;
|
||||
regulator-name = "PP1800_LCDIO";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pp1800_cam: regulator@6 {
|
||||
compatible = "regulator-fixed";
|
||||
reg= <6>;
|
||||
regulator-name = "PP1800_CAM";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
usbc_vbus: regulator@7 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <7>;
|
||||
regulator-name = "USBC_VBUS";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue