diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h index 622c666399fd..5421fc413f94 100644 --- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h +++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h @@ -742,6 +742,10 @@ struct ice_aqc_add_elem { struct ice_aqc_txsched_elem_data generic[1]; }; +struct ice_aqc_conf_elem { + struct ice_aqc_txsched_elem_data generic[1]; +}; + struct ice_aqc_get_elem { struct ice_aqc_txsched_elem_data generic[1]; }; @@ -783,6 +787,44 @@ struct ice_aqc_port_ets_elem { __le32 tc_node_teid[8]; /* Used for response, reserved in command */ }; +/* Rate limiting profile for + * Add RL profile (indirect 0x0410) + * Query RL profile (indirect 0x0411) + * Remove RL profile (indirect 0x0415) + * These indirect commands acts on single or multiple + * RL profiles with specified data. + */ +struct ice_aqc_rl_profile { + __le16 num_profiles; + __le16 num_processed; /* Only for response. Reserved in Command. */ + u8 reserved[4]; + __le32 addr_high; + __le32 addr_low; +}; + +struct ice_aqc_rl_profile_elem { + u8 level; + u8 flags; +#define ICE_AQC_RL_PROFILE_TYPE_S 0x0 +#define ICE_AQC_RL_PROFILE_TYPE_M (0x3 << ICE_AQC_RL_PROFILE_TYPE_S) +#define ICE_AQC_RL_PROFILE_TYPE_CIR 0 +#define ICE_AQC_RL_PROFILE_TYPE_EIR 1 +#define ICE_AQC_RL_PROFILE_TYPE_SRL 2 +/* The following flag is used for Query RL Profile Data */ +#define ICE_AQC_RL_PROFILE_INVAL_S 0x7 +#define ICE_AQC_RL_PROFILE_INVAL_M (0x1 << ICE_AQC_RL_PROFILE_INVAL_S) + + __le16 profile_id; + __le16 max_burst_size; + __le16 rl_multiply; + __le16 wake_up_calc; + __le16 rl_encode; +}; + +struct ice_aqc_rl_profile_generic_elem { + struct ice_aqc_rl_profile_elem generic[1]; +}; + /* Query Scheduler Resource Allocation (indirect 0x0412) * This indirect command retrieves the scheduler resources allocated by * EMP Firmware to the given PF. @@ -1657,6 +1699,7 @@ struct ice_aq_desc { struct ice_aqc_sched_elem_cmd sched_elem_cmd; struct ice_aqc_query_txsched_res query_sched_res; struct ice_aqc_query_port_ets port_ets; + struct ice_aqc_rl_profile rl_profile; struct ice_aqc_nvm nvm; struct ice_aqc_nvm_checksum nvm_checksum; struct ice_aqc_pf_vf_msg virt; @@ -1758,12 +1801,15 @@ enum ice_adminq_opc { /* transmit scheduler commands */ ice_aqc_opc_get_dflt_topo = 0x0400, ice_aqc_opc_add_sched_elems = 0x0401, + ice_aqc_opc_cfg_sched_elems = 0x0403, ice_aqc_opc_get_sched_elems = 0x0404, ice_aqc_opc_suspend_sched_elems = 0x0409, ice_aqc_opc_resume_sched_elems = 0x040A, ice_aqc_opc_query_port_ets = 0x040E, ice_aqc_opc_delete_sched_elems = 0x040F, + ice_aqc_opc_add_rl_profiles = 0x0410, ice_aqc_opc_query_sched_res = 0x0412, + ice_aqc_opc_remove_rl_profiles = 0x0415, /* PHY commands */ ice_aqc_opc_get_phy_caps = 0x0600, diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c index 9972929053aa..3e0d50c1bc7a 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.c +++ b/drivers/net/ethernet/intel/ice/ice_common.c @@ -855,6 +855,9 @@ enum ice_status ice_init_hw(struct ice_hw *hw) goto err_unroll_sched; } INIT_LIST_HEAD(&hw->agg_list); + /* Initialize max burst size */ + if (!hw->max_burst_size) + ice_cfg_rl_burst_size(hw, ICE_SCHED_DFLT_BURST_SIZE); status = ice_init_fltr_mgmt_struct(hw); if (status) @@ -3260,7 +3263,7 @@ ice_set_ctx(u8 *src_ctx, u8 *dest_ctx, const struct ice_ctx_ele *ce_info) * @tc: TC number * @q_handle: software queue handle */ -static struct ice_q_ctx * +struct ice_q_ctx * ice_get_lan_q_ctx(struct ice_hw *hw, u16 vsi_handle, u8 tc, u16 q_handle) { struct ice_vsi_ctx *vsi; @@ -3357,9 +3360,12 @@ ice_ena_vsi_txq(struct ice_port_info *pi, u16 vsi_handle, u8 tc, u16 q_handle, node.node_teid = buf->txqs[0].q_teid; node.data.elem_type = ICE_AQC_ELEM_TYPE_LEAF; q_ctx->q_handle = q_handle; + q_ctx->q_teid = le32_to_cpu(node.node_teid); - /* add a leaf node into schduler tree queue layer */ + /* add a leaf node into scheduler tree queue layer */ status = ice_sched_add_node(pi, hw->num_tx_sched_layers - 1, &node); + if (!status) + status = ice_sched_replay_q_bw(pi, q_ctx); ena_txq_exit: mutex_unlock(&pi->sched_lock); diff --git a/drivers/net/ethernet/intel/ice/ice_common.h b/drivers/net/ethernet/intel/ice/ice_common.h index db9a2d48202f..5a52f3b3e688 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.h +++ b/drivers/net/ethernet/intel/ice/ice_common.h @@ -141,6 +141,8 @@ ice_ena_vsi_txq(struct ice_port_info *pi, u16 vsi_handle, u8 tc, u16 q_handle, enum ice_status ice_replay_vsi(struct ice_hw *hw, u16 vsi_handle); void ice_replay_post(struct ice_hw *hw); void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf); +struct ice_q_ctx * +ice_get_lan_q_ctx(struct ice_hw *hw, u16 vsi_handle, u8 tc, u16 q_handle); void ice_stat_update40(struct ice_hw *hw, u32 reg, bool prev_stat_loaded, u64 *prev_stat, u64 *cur_stat); diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c index baea28c712ee..c00c68bacadb 100644 --- a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c @@ -101,6 +101,16 @@ u8 ice_dcb_get_num_tc(struct ice_dcbx_cfg *dcbcfg) return ret; } +/** + * ice_dcb_get_tc - Get the TC associated with the queue + * @vsi: ptr to the VSI + * @queue_index: queue number associated with VSI + */ +u8 ice_dcb_get_tc(struct ice_vsi *vsi, int queue_index) +{ + return vsi->tx_rings[queue_index]->dcb_tc; +} + /** * ice_vsi_cfg_dcb_rings - Update rings to reflect DCB TC * @vsi: VSI owner of rings being updated diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_lib.h b/drivers/net/ethernet/intel/ice/ice_dcb_lib.h index d11a0aab01ac..59e40cf2dd73 100644 --- a/drivers/net/ethernet/intel/ice/ice_dcb_lib.h +++ b/drivers/net/ethernet/intel/ice/ice_dcb_lib.h @@ -14,6 +14,7 @@ void ice_dcb_rebuild(struct ice_pf *pf); u8 ice_dcb_get_ena_tc(struct ice_dcbx_cfg *dcbcfg); u8 ice_dcb_get_num_tc(struct ice_dcbx_cfg *dcbcfg); +u8 ice_dcb_get_tc(struct ice_vsi *vsi, int queue_index); void ice_vsi_cfg_dcb_rings(struct ice_vsi *vsi); int ice_init_pf_dcb(struct ice_pf *pf, bool locked); void ice_update_dcb_stats(struct ice_pf *pf); @@ -42,6 +43,13 @@ static inline u8 ice_dcb_get_num_tc(struct ice_dcbx_cfg __always_unused *dcbcfg) return 1; } +static inline u8 +ice_dcb_get_tc(struct ice_vsi __always_unused *vsi, + int __always_unused queue_index) +{ + return 0; +} + static inline int ice_init_pf_dcb(struct ice_pf *pf, bool __always_unused locked) { diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 5f3a692f28e6..cacbe2103b28 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -3648,6 +3648,48 @@ static void ice_set_rx_mode(struct net_device *netdev) ice_service_task_schedule(vsi->back); } +/** + * ice_set_tx_maxrate - NDO callback to set the maximum per-queue bitrate + * @netdev: network interface device structure + * @queue_index: Queue ID + * @maxrate: maximum bandwidth in Mbps + */ +static int +ice_set_tx_maxrate(struct net_device *netdev, int queue_index, u32 maxrate) +{ + struct ice_netdev_priv *np = netdev_priv(netdev); + struct ice_vsi *vsi = np->vsi; + enum ice_status status; + u16 q_handle; + u8 tc; + + /* Validate maxrate requested is within permitted range */ + if (maxrate && (maxrate > (ICE_SCHED_MAX_BW / 1000))) { + netdev_err(netdev, + "Invalid max rate %d specified for the queue %d\n", + maxrate, queue_index); + return -EINVAL; + } + + q_handle = vsi->tx_rings[queue_index]->q_handle; + tc = ice_dcb_get_tc(vsi, queue_index); + + /* Set BW back to default, when user set maxrate to 0 */ + if (!maxrate) + status = ice_cfg_q_bw_dflt_lmt(vsi->port_info, vsi->idx, tc, + q_handle, ICE_MAX_BW); + else + status = ice_cfg_q_bw_lmt(vsi->port_info, vsi->idx, tc, + q_handle, ICE_MAX_BW, maxrate * 1000); + if (status) { + netdev_err(netdev, + "Unable to set Tx max rate, error %d\n", status); + return -EIO; + } + + return 0; +} + /** * ice_fdb_add - add an entry to the hardware database * @ndm: the input from the stack @@ -5159,6 +5201,7 @@ static const struct net_device_ops ice_netdev_ops = { .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = ice_change_mtu, .ndo_get_stats64 = ice_get_stats64, + .ndo_set_tx_maxrate = ice_set_tx_maxrate, .ndo_set_vf_spoofchk = ice_set_vf_spoofchk, .ndo_set_vf_mac = ice_set_vf_mac, .ndo_get_vf_config = ice_get_vf_cfg, diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c index fc624b73d05d..6f8a83f92c8d 100644 --- a/drivers/net/ethernet/intel/ice/ice_sched.c +++ b/drivers/net/ethernet/intel/ice/ice_sched.c @@ -410,6 +410,27 @@ ice_aq_add_sched_elems(struct ice_hw *hw, u16 grps_req, grps_added, cd); } +/** + * ice_aq_cfg_sched_elems - configures scheduler elements + * @hw: pointer to the HW struct + * @elems_req: number of elements to configure + * @buf: pointer to buffer + * @buf_size: buffer size in bytes + * @elems_cfgd: returns total number of elements configured + * @cd: pointer to command details structure or NULL + * + * Configure scheduling elements (0x0403) + */ +static enum ice_status +ice_aq_cfg_sched_elems(struct ice_hw *hw, u16 elems_req, + struct ice_aqc_conf_elem *buf, u16 buf_size, + u16 *elems_cfgd, struct ice_sq_cd *cd) +{ + return ice_aqc_send_sched_elem_cmd(hw, ice_aqc_opc_cfg_sched_elems, + elems_req, (void *)buf, buf_size, + elems_cfgd, cd); +} + /** * ice_aq_suspend_sched_elems - suspend scheduler elements * @hw: pointer to the HW struct @@ -556,6 +577,149 @@ ice_alloc_lan_q_ctx(struct ice_hw *hw, u16 vsi_handle, u8 tc, u16 new_numqs) return 0; } +/** + * ice_aq_rl_profile - performs a rate limiting task + * @hw: pointer to the HW struct + * @opcode:opcode for add, query, or remove profile(s) + * @num_profiles: the number of profiles + * @buf: pointer to buffer + * @buf_size: buffer size in bytes + * @num_processed: number of processed add or remove profile(s) to return + * @cd: pointer to command details structure + * + * RL profile function to add, query, or remove profile(s) + */ +static enum ice_status +ice_aq_rl_profile(struct ice_hw *hw, enum ice_adminq_opc opcode, + u16 num_profiles, struct ice_aqc_rl_profile_generic_elem *buf, + u16 buf_size, u16 *num_processed, struct ice_sq_cd *cd) +{ + struct ice_aqc_rl_profile *cmd; + struct ice_aq_desc desc; + enum ice_status status; + + cmd = &desc.params.rl_profile; + + ice_fill_dflt_direct_cmd_desc(&desc, opcode); + desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD); + cmd->num_profiles = cpu_to_le16(num_profiles); + status = ice_aq_send_cmd(hw, &desc, buf, buf_size, cd); + if (!status && num_processed) + *num_processed = le16_to_cpu(cmd->num_processed); + return status; +} + +/** + * ice_aq_add_rl_profile - adds rate limiting profile(s) + * @hw: pointer to the HW struct + * @num_profiles: the number of profile(s) to be add + * @buf: pointer to buffer + * @buf_size: buffer size in bytes + * @num_profiles_added: total number of profiles added to return + * @cd: pointer to command details structure + * + * Add RL profile (0x0410) + */ +static enum ice_status +ice_aq_add_rl_profile(struct ice_hw *hw, u16 num_profiles, + struct ice_aqc_rl_profile_generic_elem *buf, + u16 buf_size, u16 *num_profiles_added, + struct ice_sq_cd *cd) +{ + return ice_aq_rl_profile(hw, ice_aqc_opc_add_rl_profiles, + num_profiles, buf, + buf_size, num_profiles_added, cd); +} + +/** + * ice_aq_remove_rl_profile - removes RL profile(s) + * @hw: pointer to the HW struct + * @num_profiles: the number of profile(s) to remove + * @buf: pointer to buffer + * @buf_size: buffer size in bytes + * @num_profiles_removed: total number of profiles removed to return + * @cd: pointer to command details structure or NULL + * + * Remove RL profile (0x0415) + */ +static enum ice_status +ice_aq_remove_rl_profile(struct ice_hw *hw, u16 num_profiles, + struct ice_aqc_rl_profile_generic_elem *buf, + u16 buf_size, u16 *num_profiles_removed, + struct ice_sq_cd *cd) +{ + return ice_aq_rl_profile(hw, ice_aqc_opc_remove_rl_profiles, + num_profiles, buf, + buf_size, num_profiles_removed, cd); +} + +/** + * ice_sched_del_rl_profile - remove RL profile + * @hw: pointer to the HW struct + * @rl_info: rate limit profile information + * + * If the profile ID is not referenced anymore, it removes profile ID with + * its associated parameters from HW DB,and locally. The caller needs to + * hold scheduler lock. + */ +static enum ice_status +ice_sched_del_rl_profile(struct ice_hw *hw, + struct ice_aqc_rl_profile_info *rl_info) +{ + struct ice_aqc_rl_profile_generic_elem *buf; + u16 num_profiles_removed; + enum ice_status status; + u16 num_profiles = 1; + + if (rl_info->prof_id_ref != 0) + return ICE_ERR_IN_USE; + + /* Safe to remove profile ID */ + buf = (struct ice_aqc_rl_profile_generic_elem *) + &rl_info->profile; + status = ice_aq_remove_rl_profile(hw, num_profiles, buf, sizeof(*buf), + &num_profiles_removed, NULL); + if (status || num_profiles_removed != num_profiles) + return ICE_ERR_CFG; + + /* Delete stale entry now */ + list_del(&rl_info->list_entry); + devm_kfree(ice_hw_to_dev(hw), rl_info); + return status; +} + +/** + * ice_sched_clear_rl_prof - clears RL prof entries + * @pi: port information structure + * + * This function removes all RL profile from HW as well as from SW DB. + */ +static void ice_sched_clear_rl_prof(struct ice_port_info *pi) +{ + u16 ln; + + for (ln = 0; ln < pi->hw->num_tx_sched_layers; ln++) { + struct ice_aqc_rl_profile_info *rl_prof_elem; + struct ice_aqc_rl_profile_info *rl_prof_tmp; + + list_for_each_entry_safe(rl_prof_elem, rl_prof_tmp, + &pi->rl_prof_list[ln], list_entry) { + struct ice_hw *hw = pi->hw; + enum ice_status status; + + rl_prof_elem->prof_id_ref = 0; + status = ice_sched_del_rl_profile(hw, rl_prof_elem); + if (status) { + ice_debug(hw, ICE_DBG_SCHED, + "Remove rl profile failed\n"); + /* On error, free mem required */ + list_del(&rl_prof_elem->list_entry); + devm_kfree(ice_hw_to_dev(hw), rl_prof_elem); + } + } + } +} + /** * ice_sched_clear_agg - clears the aggregator related information * @hw: pointer to the hardware structure @@ -592,6 +756,8 @@ static void ice_sched_clear_tx_topo(struct ice_port_info *pi) { if (!pi) return; + /* remove RL profiles related lists */ + ice_sched_clear_rl_prof(pi); if (pi->root) { ice_free_sched_node(pi, pi->root); pi->root = NULL; @@ -1014,6 +1180,8 @@ enum ice_status ice_sched_init_port(struct ice_port_info *pi) /* initialize the port for handling the scheduler tree */ pi->port_state = ICE_SCHED_PORT_STATE_READY; mutex_init(&pi->sched_lock); + for (i = 0; i < ICE_AQC_TOPO_MAX_LEVEL_NUM; i++) + INIT_LIST_HEAD(&pi->rl_prof_list[i]); err_init_port: if (status && pi->root) { @@ -1062,8 +1230,8 @@ enum ice_status ice_sched_query_res_alloc(struct ice_hw *hw) * and so on. This array will be populated from root (index 0) to * qgroup layer 7. Leaf node has no children. */ - for (i = 0; i < hw->num_tx_sched_layers; i++) { - max_sibl = buf->layer_props[i].max_sibl_grp_sz; + for (i = 0; i < hw->num_tx_sched_layers - 1; i++) { + max_sibl = buf->layer_props[i + 1].max_sibl_grp_sz; hw->max_children[i] = le16_to_cpu(max_sibl); } @@ -1670,3 +1838,1095 @@ enum ice_status ice_rm_vsi_lan_cfg(struct ice_port_info *pi, u16 vsi_handle) { return ice_sched_rm_vsi_cfg(pi, vsi_handle, ICE_SCHED_NODE_OWNER_LAN); } + +/** + * ice_sched_rm_unused_rl_prof - remove unused RL profile + * @pi: port information structure + * + * This function removes unused rate limit profiles from the HW and + * SW DB. The caller needs to hold scheduler lock. + */ +static void ice_sched_rm_unused_rl_prof(struct ice_port_info *pi) +{ + u16 ln; + + for (ln = 0; ln < pi->hw->num_tx_sched_layers; ln++) { + struct ice_aqc_rl_profile_info *rl_prof_elem; + struct ice_aqc_rl_profile_info *rl_prof_tmp; + + list_for_each_entry_safe(rl_prof_elem, rl_prof_tmp, + &pi->rl_prof_list[ln], list_entry) { + if (!ice_sched_del_rl_profile(pi->hw, rl_prof_elem)) + ice_debug(pi->hw, ICE_DBG_SCHED, + "Removed rl profile\n"); + } + } +} + +/** + * ice_sched_update_elem - update element + * @hw: pointer to the HW struct + * @node: pointer to node + * @info: node info to update + * + * It updates the HW DB, and local SW DB of node. It updates the scheduling + * parameters of node from argument info data buffer (Info->data buf) and + * returns success or error on config sched element failure. The caller + * needs to hold scheduler lock. + */ +static enum ice_status +ice_sched_update_elem(struct ice_hw *hw, struct ice_sched_node *node, + struct ice_aqc_txsched_elem_data *info) +{ + struct ice_aqc_conf_elem buf; + enum ice_status status; + u16 elem_cfgd = 0; + u16 num_elems = 1; + + buf.generic[0] = *info; + /* Parent TEID is reserved field in this aq call */ + buf.generic[0].parent_teid = 0; + /* Element type is reserved field in this aq call */ + buf.generic[0].data.elem_type = 0; + /* Flags is reserved field in this aq call */ + buf.generic[0].data.flags = 0; + + /* Update HW DB */ + /* Configure element node */ + status = ice_aq_cfg_sched_elems(hw, num_elems, &buf, sizeof(buf), + &elem_cfgd, NULL); + if (status || elem_cfgd != num_elems) { + ice_debug(hw, ICE_DBG_SCHED, "Config sched elem error\n"); + return ICE_ERR_CFG; + } + + /* Config success case */ + /* Now update local SW DB */ + /* Only copy the data portion of info buffer */ + node->info.data = info->data; + return status; +} + +/** + * ice_sched_cfg_node_bw_alloc - configure node BW weight/alloc params + * @hw: pointer to the HW struct + * @node: sched node to configure + * @rl_type: rate limit type CIR, EIR, or shared + * @bw_alloc: BW weight/allocation + * + * This function configures node element's BW allocation. + */ +static enum ice_status +ice_sched_cfg_node_bw_alloc(struct ice_hw *hw, struct ice_sched_node *node, + enum ice_rl_type rl_type, u8 bw_alloc) +{ + struct ice_aqc_txsched_elem_data buf; + struct ice_aqc_txsched_elem *data; + enum ice_status status; + + buf = node->info; + data = &buf.data; + if (rl_type == ICE_MIN_BW) { + data->valid_sections |= ICE_AQC_ELEM_VALID_CIR; + data->cir_bw.bw_alloc = cpu_to_le16(bw_alloc); + } else if (rl_type == ICE_MAX_BW) { + data->valid_sections |= ICE_AQC_ELEM_VALID_EIR; + data->eir_bw.bw_alloc = cpu_to_le16(bw_alloc); + } else { + return ICE_ERR_PARAM; + } + + /* Configure element */ + status = ice_sched_update_elem(hw, node, &buf); + return status; +} + +/** + * ice_set_clear_cir_bw - set or clear CIR BW + * @bw_t_info: bandwidth type information structure + * @bw: bandwidth in Kbps - Kilo bits per sec + * + * Save or clear CIR bandwidth (BW) in the passed param bw_t_info. + */ +static void +ice_set_clear_cir_bw(struct ice_bw_type_info *bw_t_info, u32 bw) +{ + if (bw == ICE_SCHED_DFLT_BW) { + clear_bit(ICE_BW_TYPE_CIR, bw_t_info->bw_t_bitmap); + bw_t_info->cir_bw.bw = 0; + } else { + /* Save type of BW information */ + set_bit(ICE_BW_TYPE_CIR, bw_t_info->bw_t_bitmap); + bw_t_info->cir_bw.bw = bw; + } +} + +/** + * ice_set_clear_eir_bw - set or clear EIR BW + * @bw_t_info: bandwidth type information structure + * @bw: bandwidth in Kbps - Kilo bits per sec + * + * Save or clear EIR bandwidth (BW) in the passed param bw_t_info. + */ +static void +ice_set_clear_eir_bw(struct ice_bw_type_info *bw_t_info, u32 bw) +{ + if (bw == ICE_SCHED_DFLT_BW) { + clear_bit(ICE_BW_TYPE_EIR, bw_t_info->bw_t_bitmap); + bw_t_info->eir_bw.bw = 0; + } else { + /* EIR BW and Shared BW profiles are mutually exclusive and + * hence only one of them may be set for any given element. + * First clear earlier saved shared BW information. + */ + clear_bit(ICE_BW_TYPE_SHARED, bw_t_info->bw_t_bitmap); + bw_t_info->shared_bw = 0; + /* save EIR BW information */ + set_bit(ICE_BW_TYPE_EIR, bw_t_info->bw_t_bitmap); + bw_t_info->eir_bw.bw = bw; + } +} + +/** + * ice_set_clear_shared_bw - set or clear shared BW + * @bw_t_info: bandwidth type information structure + * @bw: bandwidth in Kbps - Kilo bits per sec + * + * Save or clear shared bandwidth (BW) in the passed param bw_t_info. + */ +static void +ice_set_clear_shared_bw(struct ice_bw_type_info *bw_t_info, u32 bw) +{ + if (bw == ICE_SCHED_DFLT_BW) { + clear_bit(ICE_BW_TYPE_SHARED, bw_t_info->bw_t_bitmap); + bw_t_info->shared_bw = 0; + } else { + /* EIR BW and Shared BW profiles are mutually exclusive and + * hence only one of them may be set for any given element. + * First clear earlier saved EIR BW information. + */ + clear_bit(ICE_BW_TYPE_EIR, bw_t_info->bw_t_bitmap); + bw_t_info->eir_bw.bw = 0; + /* save shared BW information */ + set_bit(ICE_BW_TYPE_SHARED, bw_t_info->bw_t_bitmap); + bw_t_info->shared_bw = bw; + } +} + +/** + * ice_sched_calc_wakeup - calculate RL profile wakeup parameter + * @bw: bandwidth in Kbps + * + * This function calculates the wakeup parameter of RL profile. + */ +static u16 ice_sched_calc_wakeup(s32 bw) +{ + s64 bytes_per_sec, wakeup_int, wakeup_a, wakeup_b, wakeup_f; + s32 wakeup_f_int; + u16 wakeup = 0; + + /* Get the wakeup integer value */ + bytes_per_sec = div64_long(((s64)bw * 1000), BITS_PER_BYTE); + wakeup_int = div64_long(ICE_RL_PROF_FREQUENCY, bytes_per_sec); + if (wakeup_int > 63) { + wakeup = (u16)((1 << 15) | wakeup_int); + } else { + /* Calculate fraction value up to 4 decimals + * Convert Integer value to a constant multiplier + */ + wakeup_b = (s64)ICE_RL_PROF_MULTIPLIER * wakeup_int; + wakeup_a = div64_long((s64)ICE_RL_PROF_MULTIPLIER * + ICE_RL_PROF_FREQUENCY, + bytes_per_sec); + + /* Get Fraction value */ + wakeup_f = wakeup_a - wakeup_b; + + /* Round up the Fractional value via Ceil(Fractional value) */ + if (wakeup_f > div64_long(ICE_RL_PROF_MULTIPLIER, 2)) + wakeup_f += 1; + + wakeup_f_int = (s32)div64_long(wakeup_f * ICE_RL_PROF_FRACTION, + ICE_RL_PROF_MULTIPLIER); + wakeup |= (u16)(wakeup_int << 9); + wakeup |= (u16)(0x1ff & wakeup_f_int); + } + + return wakeup; +} + +/** + * ice_sched_bw_to_rl_profile - convert BW to profile parameters + * @bw: bandwidth in Kbps + * @profile: profile parameters to return + * + * This function converts the BW to profile structure format. + */ +static enum ice_status +ice_sched_bw_to_rl_profile(u32 bw, struct ice_aqc_rl_profile_elem *profile) +{ + enum ice_status status = ICE_ERR_PARAM; + s64 bytes_per_sec, ts_rate, mv_tmp; + bool found = false; + s32 encode = 0; + s64 mv = 0; + s32 i; + + /* Bw settings range is from 0.5Mb/sec to 100Gb/sec */ + if (bw < ICE_SCHED_MIN_BW || bw > ICE_SCHED_MAX_BW) + return status; + + /* Bytes per second from Kbps */ + bytes_per_sec = div64_long(((s64)bw * 1000), BITS_PER_BYTE); + + /* encode is 6 bits but really useful are 5 bits */ + for (i = 0; i < 64; i++) { + u64 pow_result = BIT_ULL(i); + + ts_rate = div64_long((s64)ICE_RL_PROF_FREQUENCY, + pow_result * ICE_RL_PROF_TS_MULTIPLIER); + if (ts_rate <= 0) + continue; + + /* Multiplier value */ + mv_tmp = div64_long(bytes_per_sec * ICE_RL_PROF_MULTIPLIER, + ts_rate); + + /* Round to the nearest ICE_RL_PROF_MULTIPLIER */ + mv = round_up_64bit(mv_tmp, ICE_RL_PROF_MULTIPLIER); + + /* First multiplier value greater than the given + * accuracy bytes + */ + if (mv > ICE_RL_PROF_ACCURACY_BYTES) { + encode = i; + found = true; + break; + } + } + if (found) { + u16 wm; + + wm = ice_sched_calc_wakeup(bw); + profile->rl_multiply = cpu_to_le16(mv); + profile->wake_up_calc = cpu_to_le16(wm); + profile->rl_encode = cpu_to_le16(encode); + status = 0; + } else { + status = ICE_ERR_DOES_NOT_EXIST; + } + + return status; +} + +/** + * ice_sched_add_rl_profile - add RL profile + * @pi: port information structure + * @rl_type: type of rate limit BW - min, max, or shared + * @bw: bandwidth in Kbps - Kilo bits per sec + * @layer_num: specifies in which layer to create profile + * + * This function first checks the existing list for corresponding BW + * parameter. If it exists, it returns the associated profile otherwise + * it creates a new rate limit profile for requested BW, and adds it to + * the HW DB and local list. It returns the new profile or null on error. + * The caller needs to hold the scheduler lock. + */ +static struct ice_aqc_rl_profile_info * +ice_sched_add_rl_profile(struct ice_port_info *pi, + enum ice_rl_type rl_type, u32 bw, u8 layer_num) +{ + struct ice_aqc_rl_profile_generic_elem *buf; + struct ice_aqc_rl_profile_info *rl_prof_elem; + u16 profiles_added = 0, num_profiles = 1; + enum ice_status status; + struct ice_hw *hw; + u8 profile_type; + + if (layer_num >= ICE_AQC_TOPO_MAX_LEVEL_NUM) + return NULL; + switch (rl_type) { + case ICE_MIN_BW: + profile_type = ICE_AQC_RL_PROFILE_TYPE_CIR; + break; + case ICE_MAX_BW: + profile_type = ICE_AQC_RL_PROFILE_TYPE_EIR; + break; + case ICE_SHARED_BW: + profile_type = ICE_AQC_RL_PROFILE_TYPE_SRL; + break; + default: + return NULL; + } + + if (!pi) + return NULL; + hw = pi->hw; + list_for_each_entry(rl_prof_elem, &pi->rl_prof_list[layer_num], + list_entry) + if (rl_prof_elem->profile.flags == profile_type && + rl_prof_elem->bw == bw) + /* Return existing profile ID info */ + return rl_prof_elem; + + /* Create new profile ID */ + rl_prof_elem = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*rl_prof_elem), + GFP_KERNEL); + + if (!rl_prof_elem) + return NULL; + + status = ice_sched_bw_to_rl_profile(bw, &rl_prof_elem->profile); + if (status) + goto exit_add_rl_prof; + + rl_prof_elem->bw = bw; + /* layer_num is zero relative, and fw expects level from 1 to 9 */ + rl_prof_elem->profile.level = layer_num + 1; + rl_prof_elem->profile.flags = profile_type; + rl_prof_elem->profile.max_burst_size = cpu_to_le16(hw->max_burst_size); + + /* Create new entry in HW DB */ + buf = (struct ice_aqc_rl_profile_generic_elem *) + &rl_prof_elem->profile; + status = ice_aq_add_rl_profile(hw, num_profiles, buf, sizeof(*buf), + &profiles_added, NULL); + if (status || profiles_added != num_profiles) + goto exit_add_rl_prof; + + /* Good entry - add in the list */ + rl_prof_elem->prof_id_ref = 0; + list_add(&rl_prof_elem->list_entry, &pi->rl_prof_list[layer_num]); + return rl_prof_elem; + +exit_add_rl_prof: + devm_kfree(ice_hw_to_dev(hw), rl_prof_elem); + return NULL; +} + +/** + * ice_sched_cfg_node_bw_lmt - configure node sched params + * @hw: pointer to the HW struct + * @node: sched node to configure + * @rl_type: rate limit type CIR, EIR, or shared + * @rl_prof_id: rate limit profile ID + * + * This function configures node element's BW limit. + */ +static enum ice_status +ice_sched_cfg_node_bw_lmt(struct ice_hw *hw, struct ice_sched_node *node, + enum ice_rl_type rl_type, u16 rl_prof_id) +{ + struct ice_aqc_txsched_elem_data buf; + struct ice_aqc_txsched_elem *data; + + buf = node->info; + data = &buf.data; + switch (rl_type) { + case ICE_MIN_BW: + data->valid_sections |= ICE_AQC_ELEM_VALID_CIR; + data->cir_bw.bw_profile_idx = cpu_to_le16(rl_prof_id); + break; + case ICE_MAX_BW: + /* EIR BW and Shared BW profiles are mutually exclusive and + * hence only one of them may be set for any given element + */ + if (data->valid_sections & ICE_AQC_ELEM_VALID_SHARED) + return ICE_ERR_CFG; + data->valid_sections |= ICE_AQC_ELEM_VALID_EIR; + data->eir_bw.bw_profile_idx = cpu_to_le16(rl_prof_id); + break; + case ICE_SHARED_BW: + /* Check for removing shared BW */ + if (rl_prof_id == ICE_SCHED_NO_SHARED_RL_PROF_ID) { + /* remove shared profile */ + data->valid_sections &= ~ICE_AQC_ELEM_VALID_SHARED; + data->srl_id = 0; /* clear SRL field */ + + /* enable back EIR to default profile */ + data->valid_sections |= ICE_AQC_ELEM_VALID_EIR; + data->eir_bw.bw_profile_idx = + cpu_to_le16(ICE_SCHED_DFLT_RL_PROF_ID); + break; + } + /* EIR BW and Shared BW profiles are mutually exclusive and + * hence only one of them may be set for any given element + */ + if ((data->valid_sections & ICE_AQC_ELEM_VALID_EIR) && + (le16_to_cpu(data->eir_bw.bw_profile_idx) != + ICE_SCHED_DFLT_RL_PROF_ID)) + return ICE_ERR_CFG; + /* EIR BW is set to default, disable it */ + data->valid_sections &= ~ICE_AQC_ELEM_VALID_EIR; + /* Okay to enable shared BW now */ + data->valid_sections |= ICE_AQC_ELEM_VALID_SHARED; + data->srl_id = cpu_to_le16(rl_prof_id); + break; + default: + /* Unknown rate limit type */ + return ICE_ERR_PARAM; + } + + /* Configure element */ + return ice_sched_update_elem(hw, node, &buf); +} + +/** + * ice_sched_get_node_rl_prof_id - get node's rate limit profile ID + * @node: sched node + * @rl_type: rate limit type + * + * If existing profile matches, it returns the corresponding rate + * limit profile ID, otherwise it returns an invalid ID as error. + */ +static u16 +ice_sched_get_node_rl_prof_id(struct ice_sched_node *node, + enum ice_rl_type rl_type) +{ + u16 rl_prof_id = ICE_SCHED_INVAL_PROF_ID; + struct ice_aqc_txsched_elem *data; + + data = &node->info.data; + switch (rl_type) { + case ICE_MIN_BW: + if (data->valid_sections & ICE_AQC_ELEM_VALID_CIR) + rl_prof_id = le16_to_cpu(data->cir_bw.bw_profile_idx); + break; + case ICE_MAX_BW: + if (data->valid_sections & ICE_AQC_ELEM_VALID_EIR) + rl_prof_id = le16_to_cpu(data->eir_bw.bw_profile_idx); + break; + case ICE_SHARED_BW: + if (data->valid_sections & ICE_AQC_ELEM_VALID_SHARED) + rl_prof_id = le16_to_cpu(data->srl_id); + break; + default: + break; + } + + return rl_prof_id; +} + +/** + * ice_sched_get_rl_prof_layer - selects rate limit profile creation layer + * @pi: port information structure + * @rl_type: type of rate limit BW - min, max, or shared + * @layer_index: layer index + * + * This function returns requested profile creation layer. + */ +static u8 +ice_sched_get_rl_prof_layer(struct ice_port_info *pi, enum ice_rl_type rl_type, + u8 layer_index) +{ + struct ice_hw *hw = pi->hw; + + if (layer_index >= hw->num_tx_sched_layers) + return ICE_SCHED_INVAL_LAYER_NUM; + switch (rl_type) { + case ICE_MIN_BW: + if (hw->layer_info[layer_index].max_cir_rl_profiles) + return layer_index; + break; + case ICE_MAX_BW: + if (hw->layer_info[layer_index].max_eir_rl_profiles) + return layer_index; + break; + case ICE_SHARED_BW: + /* if current layer doesn't support SRL profile creation + * then try a layer up or down. + */ + if (hw->layer_info[layer_index].max_srl_profiles) + return layer_index; + else if (layer_index < hw->num_tx_sched_layers - 1 && + hw->layer_info[layer_index + 1].max_srl_profiles) + return layer_index + 1; + else if (layer_index > 0 && + hw->layer_info[layer_index - 1].max_srl_profiles) + return layer_index - 1; + break; + default: + break; + } + return ICE_SCHED_INVAL_LAYER_NUM; +} + +/** + * ice_sched_get_srl_node - get shared rate limit node + * @node: tree node + * @srl_layer: shared rate limit layer + * + * This function returns SRL node to be used for shared rate limit purpose. + * The caller needs to hold scheduler lock. + */ +static struct ice_sched_node * +ice_sched_get_srl_node(struct ice_sched_node *node, u8 srl_layer) +{ + if (srl_layer > node->tx_sched_layer) + return node->children[0]; + else if (srl_layer < node->tx_sched_layer) + /* Node can't be created without a parent. It will always + * have a valid parent except root node. + */ + return node->parent; + else + return node; +} + +/** + * ice_sched_rm_rl_profile - remove RL profile ID + * @pi: port information structure + * @layer_num: layer number where profiles are saved + * @profile_type: profile type like EIR, CIR, or SRL + * @profile_id: profile ID to remove + * + * This function removes rate limit profile from layer 'layer_num' of type + * 'profile_type' and profile ID as 'profile_id'. The caller needs to hold + * scheduler lock. + */ +static enum ice_status +ice_sched_rm_rl_profile(struct ice_port_info *pi, u8 layer_num, u8 profile_type, + u16 profile_id) +{ + struct ice_aqc_rl_profile_info *rl_prof_elem; + enum ice_status status = 0; + + if (layer_num >= ICE_AQC_TOPO_MAX_LEVEL_NUM) + return ICE_ERR_PARAM; + /* Check the existing list for RL profile */ + list_for_each_entry(rl_prof_elem, &pi->rl_prof_list[layer_num], + list_entry) + if (rl_prof_elem->profile.flags == profile_type && + le16_to_cpu(rl_prof_elem->profile.profile_id) == + profile_id) { + if (rl_prof_elem->prof_id_ref) + rl_prof_elem->prof_id_ref--; + + /* Remove old profile ID from database */ + status = ice_sched_del_rl_profile(pi->hw, rl_prof_elem); + if (status && status != ICE_ERR_IN_USE) + ice_debug(pi->hw, ICE_DBG_SCHED, + "Remove rl profile failed\n"); + break; + } + if (status == ICE_ERR_IN_USE) + status = 0; + return status; +} + +/** + * ice_sched_set_node_bw_dflt - set node's bandwidth limit to default + * @pi: port information structure + * @node: pointer to node structure + * @rl_type: rate limit type min, max, or shared + * @layer_num: layer number where RL profiles are saved + * + * This function configures node element's BW rate limit profile ID of + * type CIR, EIR, or SRL to default. This function needs to be called + * with the scheduler lock held. + */ +static enum ice_status +ice_sched_set_node_bw_dflt(struct ice_port_info *pi, + struct ice_sched_node *node, + enum ice_rl_type rl_type, u8 layer_num) +{ + enum ice_status status; + struct ice_hw *hw; + u8 profile_type; + u16 rl_prof_id; + u16 old_id; + + hw = pi->hw; + switch (rl_type) { + case ICE_MIN_BW: + profile_type = ICE_AQC_RL_PROFILE_TYPE_CIR; + rl_prof_id = ICE_SCHED_DFLT_RL_PROF_ID; + break; + case ICE_MAX_BW: + profile_type = ICE_AQC_RL_PROFILE_TYPE_EIR; + rl_prof_id = ICE_SCHED_DFLT_RL_PROF_ID; + break; + case ICE_SHARED_BW: + profile_type = ICE_AQC_RL_PROFILE_TYPE_SRL; + /* No SRL is configured for default case */ + rl_prof_id = ICE_SCHED_NO_SHARED_RL_PROF_ID; + break; + default: + return ICE_ERR_PARAM; + } + /* Save existing RL prof ID for later clean up */ + old_id = ice_sched_get_node_rl_prof_id(node, rl_type); + /* Configure BW scheduling parameters */ + status = ice_sched_cfg_node_bw_lmt(hw, node, rl_type, rl_prof_id); + if (status) + return status; + + /* Remove stale RL profile ID */ + if (old_id == ICE_SCHED_DFLT_RL_PROF_ID || + old_id == ICE_SCHED_INVAL_PROF_ID) + return 0; + + return ice_sched_rm_rl_profile(pi, layer_num, profile_type, old_id); +} + +/** + * ice_sched_set_eir_srl_excl - set EIR/SRL exclusiveness + * @pi: port information structure + * @node: pointer to node structure + * @layer_num: layer number where rate limit profiles are saved + * @rl_type: rate limit type min, max, or shared + * @bw: bandwidth value + * + * This function prepares node element's bandwidth to SRL or EIR exclusively. + * EIR BW and Shared BW profiles are mutually exclusive and hence only one of + * them may be set for any given element. This function needs to be called + * with the scheduler lock held. + */ +static enum ice_status +ice_sched_set_eir_srl_excl(struct ice_port_info *pi, + struct ice_sched_node *node, + u8 layer_num, enum ice_rl_type rl_type, u32 bw) +{ + if (rl_type == ICE_SHARED_BW) { + /* SRL node passed in this case, it may be different node */ + if (bw == ICE_SCHED_DFLT_BW) + /* SRL being removed, ice_sched_cfg_node_bw_lmt() + * enables EIR to default. EIR is not set in this + * case, so no additional action is required. + */ + return 0; + + /* SRL being configured, set EIR to default here. + * ice_sched_cfg_node_bw_lmt() disables EIR when it + * configures SRL + */ + return ice_sched_set_node_bw_dflt(pi, node, ICE_MAX_BW, + layer_num); + } else if (rl_type == ICE_MAX_BW && + node->info.data.valid_sections & ICE_AQC_ELEM_VALID_SHARED) { + /* Remove Shared profile. Set default shared BW call + * removes shared profile for a node. + */ + return ice_sched_set_node_bw_dflt(pi, node, + ICE_SHARED_BW, + layer_num); + } + return 0; +} + +/** + * ice_sched_set_node_bw - set node's bandwidth + * @pi: port information structure + * @node: tree node + * @rl_type: rate limit type min, max, or shared + * @bw: bandwidth in Kbps - Kilo bits per sec + * @layer_num: layer number + * + * This function adds new profile corresponding to requested BW, configures + * node's RL profile ID of type CIR, EIR, or SRL, and removes old profile + * ID from local database. The caller needs to hold scheduler lock. + */ +static enum ice_status +ice_sched_set_node_bw(struct ice_port_info *pi, struct ice_sched_node *node, + enum ice_rl_type rl_type, u32 bw, u8 layer_num) +{ + struct ice_aqc_rl_profile_info *rl_prof_info; + enum ice_status status = ICE_ERR_PARAM; + struct ice_hw *hw = pi->hw; + u16 old_id, rl_prof_id; + + rl_prof_info = ice_sched_add_rl_profile(pi, rl_type, bw, layer_num); + if (!rl_prof_info) + return status; + + rl_prof_id = le16_to_cpu(rl_prof_info->profile.profile_id); + + /* Save existing RL prof ID for later clean up */ + old_id = ice_sched_get_node_rl_prof_id(node, rl_type); + /* Configure BW scheduling parameters */ + status = ice_sched_cfg_node_bw_lmt(hw, node, rl_type, rl_prof_id); + if (status) + return status; + + /* New changes has been applied */ + /* Increment the profile ID reference count */ + rl_prof_info->prof_id_ref++; + + /* Check for old ID removal */ + if ((old_id == ICE_SCHED_DFLT_RL_PROF_ID && rl_type != ICE_SHARED_BW) || + old_id == ICE_SCHED_INVAL_PROF_ID || old_id == rl_prof_id) + return 0; + + return ice_sched_rm_rl_profile(pi, layer_num, + rl_prof_info->profile.flags, + old_id); +} + +/** + * ice_sched_set_node_bw_lmt - set node's BW limit + * @pi: port information structure + * @node: tree node + * @rl_type: rate limit type min, max, or shared + * @bw: bandwidth in Kbps - Kilo bits per sec + * + * It updates node's BW limit parameters like BW RL profile ID of type CIR, + * EIR, or SRL. The caller needs to hold scheduler lock. + */ +static enum ice_status +ice_sched_set_node_bw_lmt(struct ice_port_info *pi, struct ice_sched_node *node, + enum ice_rl_type rl_type, u32 bw) +{ + struct ice_sched_node *cfg_node = node; + enum ice_status status; + + struct ice_hw *hw; + u8 layer_num; + + if (!pi) + return ICE_ERR_PARAM; + hw = pi->hw; + /* Remove unused RL profile IDs from HW and SW DB */ + ice_sched_rm_unused_rl_prof(pi); + layer_num = ice_sched_get_rl_prof_layer(pi, rl_type, + node->tx_sched_layer); + if (layer_num >= hw->num_tx_sched_layers) + return ICE_ERR_PARAM; + + if (rl_type == ICE_SHARED_BW) { + /* SRL node may be different */ + cfg_node = ice_sched_get_srl_node(node, layer_num); + if (!cfg_node) + return ICE_ERR_CFG; + } + /* EIR BW and Shared BW profiles are mutually exclusive and + * hence only one of them may be set for any given element + */ + status = ice_sched_set_eir_srl_excl(pi, cfg_node, layer_num, rl_type, + bw); + if (status) + return status; + if (bw == ICE_SCHED_DFLT_BW) + return ice_sched_set_node_bw_dflt(pi, cfg_node, rl_type, + layer_num); + return ice_sched_set_node_bw(pi, cfg_node, rl_type, bw, layer_num); +} + +/** + * ice_sched_set_node_bw_dflt_lmt - set node's BW limit to default + * @pi: port information structure + * @node: pointer to node structure + * @rl_type: rate limit type min, max, or shared + * + * This function configures node element's BW rate limit profile ID of + * type CIR, EIR, or SRL to default. This function needs to be called + * with the scheduler lock held. + */ +static enum ice_status +ice_sched_set_node_bw_dflt_lmt(struct ice_port_info *pi, + struct ice_sched_node *node, + enum ice_rl_type rl_type) +{ + return ice_sched_set_node_bw_lmt(pi, node, rl_type, + ICE_SCHED_DFLT_BW); +} + +/** + * ice_sched_validate_srl_node - Check node for SRL applicability + * @node: sched node to configure + * @sel_layer: selected SRL layer + * + * This function checks if the SRL can be applied to a selected layer node on + * behalf of the requested node (first argument). This function needs to be + * called with scheduler lock held. + */ +static enum ice_status +ice_sched_validate_srl_node(struct ice_sched_node *node, u8 sel_layer) +{ + /* SRL profiles are not available on all layers. Check if the + * SRL profile can be applied to a node above or below the + * requested node. SRL configuration is possible only if the + * selected layer's node has single child. + */ + if (sel_layer == node->tx_sched_layer || + ((sel_layer == node->tx_sched_layer + 1) && + node->num_children == 1) || + ((sel_layer == node->tx_sched_layer - 1) && + (node->parent && node->parent->num_children == 1))) + return 0; + + return ICE_ERR_CFG; +} + +/** + * ice_sched_save_q_bw - save queue node's BW information + * @q_ctx: queue context structure + * @rl_type: rate limit type min, max, or shared + * @bw: bandwidth in Kbps - Kilo bits per sec + * + * Save BW information of queue type node for post replay use. + */ +static enum ice_status +ice_sched_save_q_bw(struct ice_q_ctx *q_ctx, enum ice_rl_type rl_type, u32 bw) +{ + switch (rl_type) { + case ICE_MIN_BW: + ice_set_clear_cir_bw(&q_ctx->bw_t_info, bw); + break; + case ICE_MAX_BW: + ice_set_clear_eir_bw(&q_ctx->bw_t_info, bw); + break; + case ICE_SHARED_BW: + ice_set_clear_shared_bw(&q_ctx->bw_t_info, bw); + break; + default: + return ICE_ERR_PARAM; + } + return 0; +} + +/** + * ice_sched_set_q_bw_lmt - sets queue BW limit + * @pi: port information structure + * @vsi_handle: sw VSI handle + * @tc: traffic class + * @q_handle: software queue handle + * @rl_type: min, max, or shared + * @bw: bandwidth in Kbps + * + * This function sets BW limit of queue scheduling node. + */ +static enum ice_status +ice_sched_set_q_bw_lmt(struct ice_port_info *pi, u16 vsi_handle, u8 tc, + u16 q_handle, enum ice_rl_type rl_type, u32 bw) +{ + enum ice_status status = ICE_ERR_PARAM; + struct ice_sched_node *node; + struct ice_q_ctx *q_ctx; + + if (!ice_is_vsi_valid(pi->hw, vsi_handle)) + return ICE_ERR_PARAM; + mutex_lock(&pi->sched_lock); + q_ctx = ice_get_lan_q_ctx(pi->hw, vsi_handle, tc, q_handle); + if (!q_ctx) + goto exit_q_bw_lmt; + node = ice_sched_find_node_by_teid(pi->root, q_ctx->q_teid); + if (!node) { + ice_debug(pi->hw, ICE_DBG_SCHED, "Wrong q_teid\n"); + goto exit_q_bw_lmt; + } + + /* Return error if it is not a leaf node */ + if (node->info.data.elem_type != ICE_AQC_ELEM_TYPE_LEAF) + goto exit_q_bw_lmt; + + /* SRL bandwidth layer selection */ + if (rl_type == ICE_SHARED_BW) { + u8 sel_layer; /* selected layer */ + + sel_layer = ice_sched_get_rl_prof_layer(pi, rl_type, + node->tx_sched_layer); + if (sel_layer >= pi->hw->num_tx_sched_layers) { + status = ICE_ERR_PARAM; + goto exit_q_bw_lmt; + } + status = ice_sched_validate_srl_node(node, sel_layer); + if (status) + goto exit_q_bw_lmt; + } + + if (bw == ICE_SCHED_DFLT_BW) + status = ice_sched_set_node_bw_dflt_lmt(pi, node, rl_type); + else + status = ice_sched_set_node_bw_lmt(pi, node, rl_type, bw); + + if (!status) + status = ice_sched_save_q_bw(q_ctx, rl_type, bw); + +exit_q_bw_lmt: + mutex_unlock(&pi->sched_lock); + return status; +} + +/** + * ice_cfg_q_bw_lmt - configure queue BW limit + * @pi: port information structure + * @vsi_handle: sw VSI handle + * @tc: traffic class + * @q_handle: software queue handle + * @rl_type: min, max, or shared + * @bw: bandwidth in Kbps + * + * This function configures BW limit of queue scheduling node. + */ +enum ice_status +ice_cfg_q_bw_lmt(struct ice_port_info *pi, u16 vsi_handle, u8 tc, + u16 q_handle, enum ice_rl_type rl_type, u32 bw) +{ + return ice_sched_set_q_bw_lmt(pi, vsi_handle, tc, q_handle, rl_type, + bw); +} + +/** + * ice_cfg_q_bw_dflt_lmt - configure queue BW default limit + * @pi: port information structure + * @vsi_handle: sw VSI handle + * @tc: traffic class + * @q_handle: software queue handle + * @rl_type: min, max, or shared + * + * This function configures BW default limit of queue scheduling node. + */ +enum ice_status +ice_cfg_q_bw_dflt_lmt(struct ice_port_info *pi, u16 vsi_handle, u8 tc, + u16 q_handle, enum ice_rl_type rl_type) +{ + return ice_sched_set_q_bw_lmt(pi, vsi_handle, tc, q_handle, rl_type, + ICE_SCHED_DFLT_BW); +} + +/** + * ice_cfg_rl_burst_size - Set burst size value + * @hw: pointer to the HW struct + * @bytes: burst size in bytes + * + * This function configures/set the burst size to requested new value. The new + * burst size value is used for future rate limit calls. It doesn't change the + * existing or previously created RL profiles. + */ +enum ice_status ice_cfg_rl_burst_size(struct ice_hw *hw, u32 bytes) +{ + u16 burst_size_to_prog; + + if (bytes < ICE_MIN_BURST_SIZE_ALLOWED || + bytes > ICE_MAX_BURST_SIZE_ALLOWED) + return ICE_ERR_PARAM; + if (ice_round_to_num(bytes, 64) <= + ICE_MAX_BURST_SIZE_64_BYTE_GRANULARITY) { + /* 64 byte granularity case */ + /* Disable MSB granularity bit */ + burst_size_to_prog = ICE_64_BYTE_GRANULARITY; + /* round number to nearest 64 byte granularity */ + bytes = ice_round_to_num(bytes, 64); + /* The value is in 64 byte chunks */ + burst_size_to_prog |= (u16)(bytes / 64); + } else { + /* k bytes granularity case */ + /* Enable MSB granularity bit */ + burst_size_to_prog = ICE_KBYTE_GRANULARITY; + /* round number to nearest 1024 granularity */ + bytes = ice_round_to_num(bytes, 1024); + /* check rounding doesn't go beyond allowed */ + if (bytes > ICE_MAX_BURST_SIZE_KBYTE_GRANULARITY) + bytes = ICE_MAX_BURST_SIZE_KBYTE_GRANULARITY; + /* The value is in k bytes */ + burst_size_to_prog |= (u16)(bytes / 1024); + } + hw->max_burst_size = burst_size_to_prog; + return 0; +} + +/** + * ice_sched_replay_node_prio - re-configure node priority + * @hw: pointer to the HW struct + * @node: sched node to configure + * @priority: priority value + * + * This function configures node element's priority value. It + * needs to be called with scheduler lock held. + */ +static enum ice_status +ice_sched_replay_node_prio(struct ice_hw *hw, struct ice_sched_node *node, + u8 priority) +{ + struct ice_aqc_txsched_elem_data buf; + struct ice_aqc_txsched_elem *data; + enum ice_status status; + + buf = node->info; + data = &buf.data; + data->valid_sections |= ICE_AQC_ELEM_VALID_GENERIC; + data->generic = priority; + + /* Configure element */ + status = ice_sched_update_elem(hw, node, &buf); + return status; +} + +/** + * ice_sched_replay_node_bw - replay node(s) BW + * @hw: pointer to the HW struct + * @node: sched node to configure + * @bw_t_info: BW type information + * + * This function restores node's BW from bw_t_info. The caller needs + * to hold the scheduler lock. + */ +static enum ice_status +ice_sched_replay_node_bw(struct ice_hw *hw, struct ice_sched_node *node, + struct ice_bw_type_info *bw_t_info) +{ + struct ice_port_info *pi = hw->port_info; + enum ice_status status = ICE_ERR_PARAM; + u16 bw_alloc; + + if (!node) + return status; + if (bitmap_empty(bw_t_info->bw_t_bitmap, ICE_BW_TYPE_CNT)) + return 0; + if (test_bit(ICE_BW_TYPE_PRIO, bw_t_info->bw_t_bitmap)) { + status = ice_sched_replay_node_prio(hw, node, + bw_t_info->generic); + if (status) + return status; + } + if (test_bit(ICE_BW_TYPE_CIR, bw_t_info->bw_t_bitmap)) { + status = ice_sched_set_node_bw_lmt(pi, node, ICE_MIN_BW, + bw_t_info->cir_bw.bw); + if (status) + return status; + } + if (test_bit(ICE_BW_TYPE_CIR_WT, bw_t_info->bw_t_bitmap)) { + bw_alloc = bw_t_info->cir_bw.bw_alloc; + status = ice_sched_cfg_node_bw_alloc(hw, node, ICE_MIN_BW, + bw_alloc); + if (status) + return status; + } + if (test_bit(ICE_BW_TYPE_EIR, bw_t_info->bw_t_bitmap)) { + status = ice_sched_set_node_bw_lmt(pi, node, ICE_MAX_BW, + bw_t_info->eir_bw.bw); + if (status) + return status; + } + if (test_bit(ICE_BW_TYPE_EIR_WT, bw_t_info->bw_t_bitmap)) { + bw_alloc = bw_t_info->eir_bw.bw_alloc; + status = ice_sched_cfg_node_bw_alloc(hw, node, ICE_MAX_BW, + bw_alloc); + if (status) + return status; + } + if (test_bit(ICE_BW_TYPE_SHARED, bw_t_info->bw_t_bitmap)) + status = ice_sched_set_node_bw_lmt(pi, node, ICE_SHARED_BW, + bw_t_info->shared_bw); + return status; +} + +/** + * ice_sched_replay_q_bw - replay queue type node BW + * @pi: port information structure + * @q_ctx: queue context structure + * + * This function replays queue type node bandwidth. This function needs to be + * called with scheduler lock held. + */ +enum ice_status +ice_sched_replay_q_bw(struct ice_port_info *pi, struct ice_q_ctx *q_ctx) +{ + struct ice_sched_node *q_node; + + /* Following also checks the presence of node in tree */ + q_node = ice_sched_find_node_by_teid(pi->root, q_ctx->q_teid); + if (!q_node) + return ICE_ERR_PARAM; + return ice_sched_replay_node_bw(pi->hw, q_node, &q_ctx->bw_t_info); +} diff --git a/drivers/net/ethernet/intel/ice/ice_sched.h b/drivers/net/ethernet/intel/ice/ice_sched.h index 3902a8ad3025..f0593cfb6521 100644 --- a/drivers/net/ethernet/intel/ice/ice_sched.h +++ b/drivers/net/ethernet/intel/ice/ice_sched.h @@ -8,6 +8,36 @@ #define ICE_QGRP_LAYER_OFFSET 2 #define ICE_VSI_LAYER_OFFSET 4 +#define ICE_SCHED_INVAL_LAYER_NUM 0xFF +/* Burst size is a 12 bits register that is configured while creating the RL + * profile(s). MSB is a granularity bit and tells the granularity type + * 0 - LSB bits are in 64 bytes granularity + * 1 - LSB bits are in 1K bytes granularity + */ +#define ICE_64_BYTE_GRANULARITY 0 +#define ICE_KBYTE_GRANULARITY BIT(11) +#define ICE_MIN_BURST_SIZE_ALLOWED 64 /* In Bytes */ +#define ICE_MAX_BURST_SIZE_ALLOWED \ + ((BIT(11) - 1) * 1024) /* In Bytes */ +#define ICE_MAX_BURST_SIZE_64_BYTE_GRANULARITY \ + ((BIT(11) - 1) * 64) /* In Bytes */ +#define ICE_MAX_BURST_SIZE_KBYTE_GRANULARITY ICE_MAX_BURST_SIZE_ALLOWED + +#define ICE_RL_PROF_FREQUENCY 446000000 +#define ICE_RL_PROF_ACCURACY_BYTES 128 +#define ICE_RL_PROF_MULTIPLIER 10000 +#define ICE_RL_PROF_TS_MULTIPLIER 32 +#define ICE_RL_PROF_FRACTION 512 + +/* BW rate limit profile parameters list entry along + * with bandwidth maintained per layer in port info + */ +struct ice_aqc_rl_profile_info { + struct ice_aqc_rl_profile_elem profile; + struct list_head list_entry; + u32 bw; /* requested */ + u16 prof_id_ref; /* profile ID to node association ref count */ +}; struct ice_sched_agg_vsi_info { struct list_head list_entry; @@ -48,4 +78,13 @@ enum ice_status ice_sched_cfg_vsi(struct ice_port_info *pi, u16 vsi_handle, u8 tc, u16 maxqs, u8 owner, bool enable); enum ice_status ice_rm_vsi_lan_cfg(struct ice_port_info *pi, u16 vsi_handle); +enum ice_status +ice_cfg_q_bw_lmt(struct ice_port_info *pi, u16 vsi_handle, u8 tc, + u16 q_handle, enum ice_rl_type rl_type, u32 bw); +enum ice_status +ice_cfg_q_bw_dflt_lmt(struct ice_port_info *pi, u16 vsi_handle, u8 tc, + u16 q_handle, enum ice_rl_type rl_type); +enum ice_status ice_cfg_rl_burst_size(struct ice_hw *hw, u32 bytes); +enum ice_status +ice_sched_replay_q_bw(struct ice_port_info *pi, struct ice_q_ctx *q_ctx); #endif /* _ICE_SCHED_H_ */ diff --git a/drivers/net/ethernet/intel/ice/ice_switch.h b/drivers/net/ethernet/intel/ice/ice_switch.h index cb123fbe30be..fa14b9545dab 100644 --- a/drivers/net/ethernet/intel/ice/ice_switch.h +++ b/drivers/net/ethernet/intel/ice/ice_switch.h @@ -14,11 +14,6 @@ #define ICE_VSI_INVAL_ID 0xffff #define ICE_INVAL_Q_HANDLE 0xFFFF -/* VSI queue context structure */ -struct ice_q_ctx { - u16 q_handle; -}; - /* VSI context structure for add/get/update/free operations */ struct ice_vsi_ctx { u16 vsi_num; diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h index 08fe3e5e72d4..d3d7049c97f0 100644 --- a/drivers/net/ethernet/intel/ice/ice_type.h +++ b/drivers/net/ethernet/intel/ice/ice_type.h @@ -19,6 +19,17 @@ static inline bool ice_is_tc_ena(unsigned long bitmap, u8 tc) return test_bit(tc, &bitmap); } +static inline u64 round_up_64bit(u64 a, u32 b) +{ + return div64_long(((a) + (b) / 2), (b)); +} + +static inline u32 ice_round_to_num(u32 N, u32 R) +{ + return ((((N) % (R)) < ((R) / 2)) ? (((N) / (R)) * (R)) : + ((((N) + (R) - 1) / (R)) * (R))); +} + /* Driver always calls main vsi_handle first */ #define ICE_MAIN_VSI_HANDLE 0 @@ -272,10 +283,56 @@ enum ice_agg_type { ICE_AGG_TYPE_QG }; -#define ICE_SCHED_DFLT_RL_PROF_ID 0 -#define ICE_SCHED_DFLT_BW_WT 1 +/* Rate limit types */ +enum ice_rl_type { + ICE_UNKNOWN_BW = 0, + ICE_MIN_BW, /* for CIR profile */ + ICE_MAX_BW, /* for EIR profile */ + ICE_SHARED_BW /* for shared profile */ +}; -/* VSI type list entry to locate corresponding VSI/ag nodes */ +#define ICE_SCHED_MIN_BW 500 /* in Kbps */ +#define ICE_SCHED_MAX_BW 100000000 /* in Kbps */ +#define ICE_SCHED_DFLT_BW 0xFFFFFFFF /* unlimited */ +#define ICE_SCHED_DFLT_RL_PROF_ID 0 +#define ICE_SCHED_NO_SHARED_RL_PROF_ID 0xFFFF +#define ICE_SCHED_DFLT_BW_WT 1 +#define ICE_SCHED_INVAL_PROF_ID 0xFFFF +#define ICE_SCHED_DFLT_BURST_SIZE (15 * 1024) /* in bytes (15k) */ + + /* Data structure for saving BW information */ +enum ice_bw_type { + ICE_BW_TYPE_PRIO, + ICE_BW_TYPE_CIR, + ICE_BW_TYPE_CIR_WT, + ICE_BW_TYPE_EIR, + ICE_BW_TYPE_EIR_WT, + ICE_BW_TYPE_SHARED, + ICE_BW_TYPE_CNT /* This must be last */ +}; + +struct ice_bw { + u32 bw; + u16 bw_alloc; +}; + +struct ice_bw_type_info { + DECLARE_BITMAP(bw_t_bitmap, ICE_BW_TYPE_CNT); + u8 generic; + struct ice_bw cir_bw; + struct ice_bw eir_bw; + u32 shared_bw; +}; + +/* VSI queue context structure for given TC */ +struct ice_q_ctx { + u16 q_handle; + u32 q_teid; + /* bw_t_info saves queue BW information */ + struct ice_bw_type_info bw_t_info; +}; + +/* VSI type list entry to locate corresponding VSI/aggregator nodes */ struct ice_sched_vsi_info { struct ice_sched_node *vsi_node[ICE_MAX_TRAFFIC_CLASS]; struct ice_sched_node *ag_node[ICE_MAX_TRAFFIC_CLASS]; @@ -364,6 +421,8 @@ struct ice_port_info { struct mutex sched_lock; /* protect access to TXSched tree */ struct ice_sched_node * sib_head[ICE_MAX_TRAFFIC_CLASS][ICE_AQC_TOPO_MAX_LEVEL_NUM]; + /* List contain profile ID(s) and other params per layer */ + struct list_head rl_prof_list[ICE_AQC_TOPO_MAX_LEVEL_NUM]; struct ice_dcbx_cfg local_dcbx_cfg; /* Oper/Local Cfg */ /* DCBX info */ struct ice_dcbx_cfg remote_dcbx_cfg; /* Peer Cfg */ @@ -415,6 +474,8 @@ struct ice_hw { u8 pf_id; /* device profile info */ + u16 max_burst_size; /* driver sets this value */ + /* Tx Scheduler values */ u16 num_tx_sched_layers; u16 num_tx_sched_phys_layers;