mirror of https://gitee.com/openkylin/linux.git
dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
Convert the STM32 fmc2-nand binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> CC: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Benjamin Gaignard
Rob Herring
parent
34376eb1b0
commit
1e25c5f533
|
|
@ -0,0 +1,98 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mtd/st,stm32-fmc2-nand.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
|
||||
|
||||
maintainers:
|
||||
- Christophe Kerello <christophe.kerello@st.com>
|
||||
|
||||
allOf:
|
||||
- $ref: "nand-controller.yaml#"
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: st,stm32mp15-fmc2
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: Registers
|
||||
- description: Chip select 0 data
|
||||
- description: Chip select 0 command
|
||||
- description: Chip select 0 address space
|
||||
- description: Chip select 1 data
|
||||
- description: Chip select 1 command
|
||||
- description: Chip select 1 address space
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
resets:
|
||||
maxItems: 1
|
||||
|
||||
dmas:
|
||||
items:
|
||||
- description: tx DMA channel
|
||||
- description: rx DMA channel
|
||||
- description: ecc DMA channel
|
||||
|
||||
dma-names:
|
||||
items:
|
||||
- const: tx
|
||||
- const: rx
|
||||
- const: ecc
|
||||
|
||||
patternProperties:
|
||||
"^nand@[a-f0-9]$":
|
||||
type: object
|
||||
properties:
|
||||
nand-ecc-step-size:
|
||||
const: 512
|
||||
|
||||
nand-ecc-strength:
|
||||
enum: [1, 4 ,8 ]
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/stm32mp1-clks.h>
|
||||
#include <dt-bindings/reset/stm32mp1-resets.h>
|
||||
nand-controller@58002000 {
|
||||
compatible = "st,stm32mp15-fmc2";
|
||||
reg = <0x58002000 0x1000>,
|
||||
<0x80000000 0x1000>,
|
||||
<0x88010000 0x1000>,
|
||||
<0x88020000 0x1000>,
|
||||
<0x81000000 0x1000>,
|
||||
<0x89010000 0x1000>,
|
||||
<0x89020000 0x1000>;
|
||||
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>,
|
||||
<&mdma1 20 0x10 0x12000a08 0x0 0x0>,
|
||||
<&mdma1 21 0x10 0x12000a0a 0x0 0x0>;
|
||||
dma-names = "tx", "rx", "ecc";
|
||||
clocks = <&rcc FMC_K>;
|
||||
resets = <&rcc FMC_R>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-on-flash-bbt;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -1,61 +0,0 @@
|
|||
STMicroelectronics Flexible Memory Controller 2 (FMC2)
|
||||
NAND Interface
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be one of:
|
||||
* st,stm32mp15-fmc2
|
||||
- reg: NAND flash controller memory areas.
|
||||
First region contains the register location.
|
||||
Regions 2 to 4 respectively contain the data, command,
|
||||
and address space for CS0.
|
||||
Regions 5 to 7 contain the same areas for CS1.
|
||||
- interrupts: The interrupt number
|
||||
- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
|
||||
- clocks: The clock needed by the NAND flash controller
|
||||
|
||||
Optional properties:
|
||||
- resets: Reference to a reset controller asserting the FMC controller
|
||||
- dmas: DMA specifiers (see: dma/stm32-mdma.txt)
|
||||
- dma-names: Must be "tx", "rx" and "ecc"
|
||||
|
||||
* NAND device bindings:
|
||||
|
||||
Required properties:
|
||||
- reg: describes the CS lines assigned to the NAND device.
|
||||
|
||||
Optional properties:
|
||||
- nand-on-flash-bbt: see nand-controller.yaml
|
||||
- nand-ecc-strength: see nand-controller.yaml
|
||||
- nand-ecc-step-size: see nand-controller.yaml
|
||||
|
||||
The following ECC strength and step size are currently supported:
|
||||
- nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming)
|
||||
- nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
|
||||
- nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default)
|
||||
|
||||
Example:
|
||||
|
||||
fmc: nand-controller@58002000 {
|
||||
compatible = "st,stm32mp15-fmc2";
|
||||
reg = <0x58002000 0x1000>,
|
||||
<0x80000000 0x1000>,
|
||||
<0x88010000 0x1000>,
|
||||
<0x88020000 0x1000>,
|
||||
<0x81000000 0x1000>,
|
||||
<0x89010000 0x1000>,
|
||||
<0x89020000 0x1000>;
|
||||
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&rcc FMC_K>;
|
||||
resets = <&rcc FMC_R>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fmc_pins_a>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-on-flash-bbt;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue