openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

regulator: BD71837 support commonly used feedback connection 

The BD71837 buck output voltages are in a few cases scaled using external
connection which adds a pull-up to regulator feedback pin. This connection
will adjust output voltage from regulator in a deterministic way.

Add support for describing this HW connection so that driver can adjust
voltage ranges accordingly.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/9959924313db7c7165598604f9a07bf227f471a8.1604994184.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Matti Vaittinen 2020-11-10 10:19:38 +02:00 committed by Mark Brown
parent 3cea11cd5e
commit 1e908b2419
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
1 changed files with 48 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
View File

@ -105,6 +105,54 @@ patternProperties:
PMIC hardware state machine.
type: boolean
# Setups where regulator (especially the buck8) output voltage is scaled
# by adding external connection where some other regulator output is
# connected to feedback-pin (over suitable resistors) is getting popular
# amongst users of BD71837. (This allows for example scaling down the
# buck8 voltages to suit lover GPU voltages for projects where buck8 is
# (ab)used to supply power for GPU.
#
# So we allow describing this external connection from DT and scale the
# voltages accordingly. This is what the connection should look like:
#
# |---------------|
# | buck 8 |-------+----->Vout
# | | |
# |---------------| |
# | |
# | |
# +-------+--R2----+
# |
# R1
# |
# V FB-pull-up
#
# Here the buck output is sifted according to formula:
#
# Vout_o = Vo - (Vpu - Vo)*R2/R1
# Linear_step = step_orig*(R1+R2)/R1
#
# where:
# Vout_o is adjusted voltage output at vsel reg value 0
# Vo is original voltage output at vsel reg value 0
# Vpu is the pull-up voltage V FB-pull-up in the picture
# R1 and R2 are resistor values.
rohm,fb-pull-up-microvolt:
description:
Feedback-pin has pull-up connection to adjust voltage range. This is
the used pull-up voltage before R1.
rohm,feedback-pull-up-r1-ohms:
description:
Feedback-pin has pull-up connection to adjust voltage range. This is
the used R1 resistor.
rohm,feedback-pull-up-r2-ohms:
description:
Feedback-pin has pull-up connection to adjust voltage range. This is
the used R2 resistor.
required:
- regulator-name