From 21437391a5f923bf3d3e09bc9cbde49b47bc4eaf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Vok=C3=A1=C4=8D?= Date: Wed, 15 Jan 2020 16:17:28 +0100 Subject: [PATCH] ARM: dts: imx6dl-yapp4: Specify USB overcurrent protection polarity MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After reset the oc protection polarity is set to active high on imx6. If the polarity is not specified in device tree it is not changed. The imx6dl-yapp4 platform uses an active-low oc signal so explicitly configure that in the device tree. Signed-off-by: Michal Vokáč Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 80ed5f16a76e..2b9423d55c37 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -562,6 +562,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_usb_h1_vbus>; + over-current-active-low; status = "disabled"; }; @@ -569,6 +570,7 @@ &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; vbus-supply = <®_usb_otg_vbus>; + over-current-active-low; srp-disable; hnp-disable; adp-disable;