openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...
This commit is contained in:
Linus Torvalds 2007-07-12 13:40:57 -07:00
parent dc690d8ef8 36e235901f
commit 21ba0f88ae
172 changed files with 762 additions and 1403 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

103
Documentation/DMA-mapping.txt
View File

@ -664,109 +664,6 @@ It is that simple.
Well, not for some odd devices. See the next section for information
about that.
DAC Addressing for Address Space Hungry Devices
There exists a class of devices which do not mesh well with the PCI
DMA mapping API. By definition these "mappings" are a finite
resource. The number of total available mappings per bus is platform
specific, but there will always be a reasonable amount.
What is "reasonable"? Reasonable means that networking and block I/O
devices need not worry about using too many mappings.
As an example of a problematic device, consider compute cluster cards.
They can potentially need to access gigabytes of memory at once via
DMA. Dynamic mappings are unsuitable for this kind of access pattern.
To this end we've provided a small API by which a device driver
may use DAC cycles to directly address all of physical memory.
Not all platforms support this, but most do. It is easy to determine
whether the platform will work properly at probe time.
First, understand that there may be a SEVERE performance penalty for
using these interfaces on some platforms. Therefore, you MUST only
use these interfaces if it is absolutely required. %99 of devices can
use the normal APIs without any problems.
Note that for streaming type mappings you must either use these
interfaces, or the dynamic mapping interfaces above. You may not mix
usage of both for the same device. Such an act is illegal and is
guaranteed to put a banana in your tailpipe.
However, consistent mappings may in fact be used in conjunction with
these interfaces. Remember that, as defined, consistent mappings are
always going to be SAC addressable.
The first thing your driver needs to do is query the PCI platform
layer if it is capable of handling your devices DAC addressing
capabilities:
int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
You may not use the following interfaces if this routine fails.
Next, DMA addresses using this API are kept track of using the
dma64_addr_t type. It is guaranteed to be big enough to hold any
DAC address the platform layer will give to you from the following
routines. If you have consistent mappings as well, you still
use plain dma_addr_t to keep track of those.
All mappings obtained here will be direct. The mappings are not
translated, and this is the purpose of this dialect of the DMA API.
All routines work with page/offset pairs. This is the _ONLY_ way to
portably refer to any piece of memory. If you have a cpu pointer
(which may be validly DMA'd too) you may easily obtain the page
and offset using something like this:
struct page *page = virt_to_page(ptr);
unsigned long offset = offset_in_page(ptr);
Here are the interfaces:
dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
struct page *page,
unsigned long offset,
int direction);
The DAC address for the tuple PAGE/OFFSET are returned. The direction
argument is the same as for pci_{map,unmap}_single(). The same rules
for cpu/device access apply here as for the streaming mapping
interfaces. To reiterate:
The cpu may touch the buffer before pci_dac_page_to_dma.
The device may touch the buffer after pci_dac_page_to_dma
is made, but the cpu may NOT.
When the DMA transfer is complete, invoke:
void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
dma64_addr_t dma_addr,
size_t len, int direction);
This must be done before the CPU looks at the buffer again.
This interface behaves identically to pci_dma_sync_{single,sg}_for_cpu().
And likewise, if you wish to let the device get back at the buffer after
the cpu has read/written it, invoke:
void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
dma64_addr_t dma_addr,
size_t len, int direction);
before letting the device access the DMA area again.
If you need to get back to the PAGE/OFFSET tuple from a dma64_addr_t
the following interfaces are provided:
struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
dma64_addr_t dma_addr);
unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
dma64_addr_t dma_addr);
This is possible with the DAC interfaces purely because they are
not translated in any way.
Optimizing Unmap State Space Consumption
On many platforms, pci_unmap_{single,page}() is simply a nop.

8
Documentation/pci.txt
View File

@ -113,9 +113,6 @@ initialization with a pointer to a structure describing the driver
(Please see Documentation/power/pci.txt for descriptions
of PCI Power Management and the related functions.)
enable_wake Enable device to generate wake events from a low power
state.
shutdown Hook into reboot_notifier_list (kernel/sys.c).
Intended to stop any idling DMA operations.
Useful for enabling wake-on-lan (NIC) or changing
@ -299,7 +296,10 @@ If the PCI device can use the PCI Memory-Write-Invalidate transaction,
call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval
and also ensures that the cache line size register is set correctly.
Check the return value of pci_set_mwi() as not all architectures
or chip-sets may support Memory-Write-Invalidate.
or chip-sets may support Memory-Write-Invalidate. Alternatively,
if Mem-Wr-Inval would be nice to have but is not required, call
pci_try_set_mwi() to have the system do its best effort at enabling
Mem-Wr-Inval.
3.2 Request MMIO/IOP resources

37
Documentation/power/pci.txt
View File

@ -164,7 +164,6 @@ struct pci_driver:
int (*suspend) (struct pci_dev *dev, pm_message_t state);
int (*resume) (struct pci_dev *dev);
int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable);
suspend
@ -251,42 +250,6 @@ The driver should update the current_state field in its pci_dev structure in
this function, except for PM-capable devices when pci_set_power_state is used.
enable_wake
-----------
Usage:
if (dev->driver && dev->driver->enable_wake)
dev->driver->enable_wake(dev,state,enable);
This callback is generally only relevant for devices that support the PCI PM
spec and have the ability to generate a PME# (Power Management Event Signal)
to wake the system up. (However, it is possible that a device may support
some non-standard way of generating a wake event on sleep.)
Bits 15:11 of the PMC (Power Mgmt Capabilities) Register in a device's
PM Capabilities describe what power states the device supports generating a
wake event from:
+------------------+
| Bit | State |
+------------------+
| 11 | D0 |
| 12 | D1 |
| 13 | D2 |
| 14 | D3hot |
| 15 | D3cold |
+------------------+
A device can use this to enable wake events:
pci_enable_wake(dev,state,enable);
Note that to enable PME# from D3cold, a value of 4 should be passed to
pci_enable_wake (since it uses an index into a bitmask). If a driver gets
a request to enable wake events from D3, two calls should be made to
pci_enable_wake (one for both D3hot and D3cold).
A reference implementation
-------------------------

5
MAINTAINERS
View File

@ -2814,11 +2814,6 @@ P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
S: Supported
PCI HOTPLUG COMPAQ DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
S: Maintained
PCIE HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com

3
arch/alpha/Kconfig
View File

@ -327,6 +327,9 @@ config PCI_DOMAINS
bool
default y
config PCI_SYSCALL
def_bool PCI
config ALPHA_CORE_AGP
bool
depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL

32
arch/alpha/kernel/pci_iommu.c
View File

@ -207,6 +207,10 @@ iommu_arena_free(struct pci_iommu_arena *arena, long ofs, long n)
p[i] = 0;
}
/* True if the machine supports DAC addressing, and DEV can
make use of it given MASK. */
static int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
/* Map a single buffer of the indicated size for PCI DMA in streaming
mode. The 32-bit PCI bus mastering address to use is returned.
Once the device is given the dma address, the device owns this memory
@ -897,7 +901,7 @@ iommu_unbind(struct pci_iommu_arena *arena, long pg_start, long pg_count)
/* True if the machine supports DAC addressing, and DEV can
make use of it given MASK. */
int
static int
pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
{
dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
@ -917,32 +921,6 @@ pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
return ok;
}
EXPORT_SYMBOL(pci_dac_dma_supported);
dma64_addr_t
pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page,
unsigned long offset, int direction)
{
return (alpha_mv.pci_dac_offset
+ __pa(page_address(page))
+ (dma64_addr_t) offset);
}
EXPORT_SYMBOL(pci_dac_page_to_dma);
struct page *
pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
{
unsigned long paddr = (dma_addr & PAGE_MASK) - alpha_mv.pci_dac_offset;
return virt_to_page(__va(paddr));
}
EXPORT_SYMBOL(pci_dac_dma_to_page);
unsigned long
pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
{
return (dma_addr & ~PAGE_MASK);
}
EXPORT_SYMBOL(pci_dac_dma_to_offset);
/* Helper for generic DMA-mapping functions. */

3
arch/arm/Kconfig
View File

@ -531,6 +531,9 @@ config PCI
information about which PCI hardware does work under Linux and which
doesn't.
config PCI_SYSCALL
def_bool PCI
# Select the host bridge type
config PCI_HOST_VIA82C505
bool

6
arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
View File

@ -391,8 +391,6 @@ static struct cpufreq_driver nforce2_driver = {
*/
static unsigned int nforce2_detect_chipset(void)
{
u8 revision;
nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
PCI_DEVICE_ID_NVIDIA_NFORCE2,
PCI_ANY_ID, PCI_ANY_ID, NULL);
@ -400,10 +398,8 @@ static unsigned int nforce2_detect_chipset(void)
if (nforce2_chipset_dev == NULL)
return -ENODEV;
pci_read_config_byte(nforce2_chipset_dev, PCI_REVISION_ID, &revision);
printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
revision);
nforce2_chipset_dev->revision);
printk(KERN_INFO
"cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n");

4
arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
View File

@ -115,7 +115,6 @@ struct gxfreq_params {
u8 pci_suscfg;
u8 pci_pmer1;
u8 pci_pmer2;
u8 pci_rev;
struct pci_dev *cs55x0;
};
@ -276,7 +275,7 @@ static void gx_set_cpuspeed(unsigned int khz)
pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
if (gx_params->pci_rev < 0x10) { /* CS5530(rev 1.2, 1.3) */
if (gx_params->cs55x0->revision < 0x10) { /* CS5530(rev 1.2, 1.3) */
suscfg = gx_params->pci_suscfg | SUSMOD;
} else { /* CS5530A,B.. */
suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
@ -471,7 +470,6 @@ static int __init cpufreq_gx_init(void)
pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
pci_read_config_byte(params->cs55x0, PCI_REVISION_ID, &params->pci_rev);
if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
kfree(params);

4
arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
View File

@ -205,7 +205,6 @@ static unsigned int speedstep_detect_chipset (void)
* host brige. Abort on these systems.
*/
static struct pci_dev *hostbridge;
u8 rev = 0;
hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82815_MC,
@ -216,8 +215,7 @@ static unsigned int speedstep_detect_chipset (void)
if (!hostbridge)
return 2; /* 2-M */
pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev);
if (rev < 5) {
if (hostbridge->revision < 5) {
dprintk("hostbridge does not support speedstep\n");
speedstep_chipset_dev = NULL;
pci_dev_put(hostbridge);

4
arch/i386/mach-visws/traps.c
View File

@ -23,13 +23,13 @@ static __init void lithium_init(void)
set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
(li_pcia_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) {
(li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
panic("This machine is not SGI Visual Workstation 320/540");
}
if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
(li_pcib_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) {
(li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
panic("This machine is not SGI Visual Workstation 320/540");
}

9
arch/i386/pci/fixup.c
View File

@ -118,12 +118,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci
static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
{
u8 v;
u8 revision;
int where = 0x55;
int mask = 0x1f; /* clear bits 5, 6, 7 by default */
pci_read_config_byte(d, PCI_REVISION_ID, &revision);
if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
/* fix pci bus latency issues resulted by NB bios error
it appears on bug free^Wreduced kt266x's bios forces
@ -133,8 +130,8 @@ static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
where = 0x95; /* the memory write queue timer register is
different for the KT266x's: 0x95 not 0x55 */
} else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
(revision == VIA_8363_KL133_REVISION_ID ||
revision == VIA_8363_KM133_REVISION_ID)) {
(d->revision == VIA_8363_KL133_REVISION_ID ||
d->revision == VIA_8363_KM133_REVISION_ID)) {
mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
causes screen corruption on the KL133/KM133 */
}
@ -142,7 +139,7 @@ static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
pci_read_config_byte(d, where, &v);
if (v & ~mask) {
printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
d->device, revision, where, v, mask, v & mask);
d->device, d->revision, where, v, mask, v & mask);
v &= mask;
pci_write_config_byte(d, where, v);
}

6
arch/ia64/Kconfig
View File

@ -520,8 +520,10 @@ config PCI
here unless you are using a simulator without PCI support.
config PCI_DOMAINS
bool
default PCI
def_bool PCI
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/pcie/Kconfig"

2
arch/mips/pci/Makefile
View File

@ -2,7 +2,7 @@
# Makefile for the PCI specific kernel interface routines under Linux.
#
obj-y += pci.o pci-dac.o
obj-y += pci.o
#
# PCI bus host bridge specific code

10
arch/mips/pci/fixup-cobalt.c
View File

@ -58,8 +58,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
static void qube_raq_galileo_fixup(struct pci_dev *dev)
{
unsigned short galileo_id;
if (dev->devfn != PCI_DEVFN(0, 0))
return;
@ -84,16 +82,14 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
* Therefore we must set the disconnect/retry cycle values to
* something sensible when using the new Galileo.
*/
pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
galileo_id &= 0xff; /* mask off class info */
printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
printk(KERN_INFO "Galileo: revision %u\n", dev->revision);
#if 0
if (galileo_id >= 0x10) {
if (dev->revision >= 0x10) {
/* New Galileo, assumes PCI stop line to VIA is connected. */
GT_WRITE(GT_PCI0_TOR_OFS, 0x4020);
} else if (galileo_id == 0x1 || galileo_id == 0x2)
} else if (dev->revision == 0x1 || dev->revision == 0x2)
#endif
{
signed int timeo;

79
arch/mips/pci/pci-dac.c
View File

@ -1,79 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com>
* Copyright (C) 2000, 2001, 06 Ralf Baechle <ralf@linux-mips.org>
* swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
*/
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/string.h>
#include <asm/cache.h>
#include <asm/io.h>
#include <dma-coherence.h>
#include <linux/pci.h>
dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
struct page *page, unsigned long offset, int direction)
{
struct device *dev = &pdev->dev;
BUG_ON(direction == DMA_NONE);
if (!plat_device_is_coherent(dev)) {
unsigned long addr;
addr = (unsigned long) page_address(page) + offset;
dma_cache_wback_inv(addr, PAGE_SIZE);
}
return plat_map_dma_mem_page(dev, page) + offset;
}
EXPORT_SYMBOL(pci_dac_page_to_dma);
struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
dma64_addr_t dma_addr)
{
return pfn_to_page(plat_dma_addr_to_phys(dma_addr) >> PAGE_SHIFT);
}
EXPORT_SYMBOL(pci_dac_dma_to_page);
unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
dma64_addr_t dma_addr)
{
return dma_addr & ~PAGE_MASK;
}
EXPORT_SYMBOL(pci_dac_dma_to_offset);
void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
dma64_addr_t dma_addr, size_t len, int direction)
{
BUG_ON(direction == PCI_DMA_NONE);
if (!plat_device_is_coherent(&pdev->dev))
dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len);
}
EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu);
void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
dma64_addr_t dma_addr, size_t len, int direction)
{
BUG_ON(direction == PCI_DMA_NONE);
if (!plat_device_is_coherent(&pdev->dev))
dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len);
}
EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device);

6
arch/powerpc/Kconfig
View File

@ -698,8 +698,10 @@ config PCI
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
bool
default PCI
def_bool PCI
config PCI_SYSCALL
def_bool PCI
config PCI_QSPAN
bool "QSpan PCI"

4
arch/powerpc/kernel/pci_32.c
View File

@ -1047,10 +1047,10 @@ void pcibios_make_OF_bus_map(void)
#endif /* CONFIG_PPC_OF */
/* Add sysfs properties */
void pcibios_add_platform_entries(struct pci_dev *pdev)
int pcibios_add_platform_entries(struct pci_dev *pdev)
{
#ifdef CONFIG_PPC_OF
device_create_file(&pdev->dev, &dev_attr_devspec);
return device_create_file(&pdev->dev, &dev_attr_devspec);
#endif /* CONFIG_PPC_OF */
}

6
arch/powerpc/kernel/pci_64.c
View File

@ -367,8 +367,10 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
dev->revision = get_int_prop(node, "revision-id", 0);
DBG(" class: 0x%x\n", dev->class);
DBG(" revision: 0x%x\n", dev->revision);
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
@ -876,9 +878,9 @@ static ssize_t pci_show_devspec(struct device *dev,
}
static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
void pcibios_add_platform_entries(struct pci_dev *pdev)
int pcibios_add_platform_entries(struct pci_dev *pdev)
{
device_create_file(&pdev->dev, &dev_attr_devspec);
return device_create_file(&pdev->dev, &dev_attr_devspec);
}
#define ISA_SPACE_MASK 0x1

6
arch/ppc/Kconfig
View File

@ -1237,8 +1237,10 @@ config PCI
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
bool
default PCI
def_bool PCI
config PCI_SYSCALL
def_bool PCI
config MPC83xx_PCI2
bool "Support for 2nd PCI host controller"

6
arch/ppc/kernel/pci.c
View File

@ -633,12 +633,6 @@ void pcibios_make_OF_bus_map(void)
{
}
/* Add sysfs properties */
void pcibios_add_platform_entries(struct pci_dev *pdev)
{
}
static int __init
pcibios_init(void)
{

3
arch/sparc/Kconfig
View File

@ -210,6 +210,9 @@ config PCI
CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
All of these platforms are extremely obscure, so say N if unsure.
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
endif

6
arch/sparc64/Kconfig
View File

@ -320,8 +320,10 @@ config PCI
doesn't.
config PCI_DOMAINS
bool
default PCI
def_bool PCI
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"

1
arch/sparc64/kernel/pci.c
View File

@ -448,6 +448,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
dev->class = class >> 8;
dev->revision = class & 0xff;
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));

3
arch/x86_64/kernel/pci-dma.c
View File

@ -22,8 +22,7 @@ EXPORT_SYMBOL(bad_dma_address);
int iommu_bio_merge __read_mostly = 0;
EXPORT_SYMBOL(iommu_bio_merge);
int iommu_sac_force __read_mostly = 0;
EXPORT_SYMBOL(iommu_sac_force);
static int iommu_sac_force __read_mostly = 0;
int no_iommu __read_mostly;
#ifdef CONFIG_IOMMU_DEBUG

7
drivers/acpi/processor_core.c
View File

@ -115,7 +115,6 @@ struct acpi_processor_errata errata __read_mostly;
static int acpi_processor_errata_piix4(struct pci_dev *dev)
{
u8 rev = 0;
u8 value1 = 0;
u8 value2 = 0;
@ -127,9 +126,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev)
* Note that 'dev' references the PIIX4 ACPI Controller.
*/
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
switch (rev) {
switch (dev->revision) {
case 0:
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
break;
@ -147,7 +144,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev)
break;
}
switch (rev) {
switch (dev->revision) {
case 0: /* PIIX4 A-step */
case 1: /* PIIX4 B-step */

6
drivers/ata/ata_piix.c
View File

@ -928,20 +928,18 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
{
struct pci_dev *pdev = NULL;
u16 cfg;
u8 rev;
int no_piix_dma = 0;
while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
{
/* Look for 450NX PXB. Check for problem configurations
A PCI quirk checks bit 6 already */
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_word(pdev, 0x41, &cfg);
/* Only on the original revision: IDE DMA can hang */
if (rev == 0x00)
if (pdev->revision == 0x00)
no_piix_dma = 1;
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
else if (cfg & (1<<14) && rev < 5)
else if (cfg & (1<<14) && pdev->revision < 5)
no_piix_dma = 2;
}
if (no_piix_dma)

34
drivers/ata/pata_ali.c
View File

@ -455,23 +455,21 @@ static struct ata_port_operations ali_c5_port_ops = {
static void ali_init_chipset(struct pci_dev *pdev)
{
u8 rev, tmp;
u8 tmp;
struct pci_dev *north, *isa_bridge;
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
/*
* The chipset revision selects the driver operations and
* mode data.
*/
if (rev >= 0x20 && rev < 0xC2) {
if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
pci_read_config_byte(pdev, 0x4B, &tmp);
/* Clear CD-ROM DMA write bit */
tmp &= 0x7F;
pci_write_config_byte(pdev, 0x4B, tmp);
} else if (rev >= 0xC2) {
} else if (pdev->revision >= 0xC2) {
/* Enable cable detection logic */
pci_read_config_byte(pdev, 0x4B, &tmp);
pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
@ -483,21 +481,21 @@ static void ali_init_chipset(struct pci_dev *pdev)
/* Configure the ALi bridge logic. For non ALi rely on BIOS.
Set the south bridge enable bit */
pci_read_config_byte(isa_bridge, 0x79, &tmp);
if (rev == 0xC2)
if (pdev->revision == 0xC2)
pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
else if (rev > 0xC2 && rev < 0xC5)
else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
}
if (rev >= 0x20) {
if (pdev->revision >= 0x20) {
/*
* CD_ROM DMA on (0x53 bit 0). Enable this even if we want
* to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
* via 0x54/55.
*/
pci_read_config_byte(pdev, 0x53, &tmp);
if (rev <= 0x20)
if (pdev->revision <= 0x20)
tmp &= ~0x02;
if (rev >= 0xc7)
if (pdev->revision >= 0xc7)
tmp |= 0x03;
else
tmp |= 0x01; /* CD_ROM enable for DMA */
@ -579,25 +577,23 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { NULL, NULL };
u8 rev, tmp;
u8 tmp;
struct pci_dev *isa_bridge;
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
/*
* The chipset revision selects the driver operations and
* mode data.
*/
if (rev < 0x20) {
if (pdev->revision < 0x20) {
ppi[0] = &info_early;
} else if (rev < 0xC2) {
} else if (pdev->revision < 0xC2) {
ppi[0] = &info_20;
} else if (rev == 0xC2) {
} else if (pdev->revision == 0xC2) {
ppi[0] = &info_c2;
} else if (rev == 0xC3) {
} else if (pdev->revision == 0xC3) {
ppi[0] = &info_c3;
} else if (rev == 0xC4) {
} else if (pdev->revision == 0xC4) {
ppi[0] = &info_c4;
} else
ppi[0] = &info_c5;
@ -605,7 +601,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ali_init_chipset(pdev);
isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* Are we paired with a UDMA capable chip */
pci_read_config_byte(isa_bridge, 0x5E, &tmp);
if ((tmp & 0x1E) == 0x12)

4
drivers/ata/pata_amd.c
View File

@ -623,17 +623,15 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { NULL, NULL };
static int printed_version;
int type = id->driver_data;
u8 rev;
u8 fifo;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_byte(pdev, 0x41, &fifo);
/* Check for AMD7409 without swdma errata and if found adjust type */
if (type == 1 && rev > 0x7)
if (type == 1 && pdev->revision > 0x7)
type = 2;
/* Check for AMD7411 */

2
drivers/ata/pata_cs5530.c
View File

@ -266,7 +266,7 @@ static int cs5530_init_chip(void)
}
pci_set_master(cs5530_0);
pci_set_mwi(cs5530_0);
pci_try_set_mwi(cs5530_0);
/*
* Set PCI CacheLineSize to 16-bytes:

3
drivers/ata/pata_it821x.c
View File

@ -587,8 +587,7 @@ static int it821x_port_start(struct ata_port *ap)
itdev->want[1][1] = ATA_ANY;
itdev->last_device = -1;
pci_read_config_byte(pdev, PCI_REVISION_ID, &conf);
if (conf == 0x10) {
if (pdev->revision == 0x11) {
itdev->timing10 = 1;
/* Need to disable ATAPI DMA for this case */
if (!itdev->smart)

5
drivers/ata/pata_serverworks.c
View File

@ -410,11 +410,8 @@ static int serverworks_fixup_osb4(struct pci_dev *pdev)
static int serverworks_fixup_csb(struct pci_dev *pdev)
{
u8 rev;
u8 btr;
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
/* Third Channel Test */
if (!(PCI_FUNC(pdev->devfn) & 1)) {
struct pci_dev * findev = NULL;
@ -456,7 +453,7 @@ static int serverworks_fixup_csb(struct pci_dev *pdev)
if (!(PCI_FUNC(pdev->devfn) & 1))
btr |= 0x2;
else
btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
pci_write_config_byte(pdev, 0x5A, btr);
return btr;

8
drivers/ata/pata_sis.c
View File

@ -931,9 +931,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (host != NULL) {
chipset = sets; /* Match found */
if (sets->device == 0x630) { /* SIS630 */
u8 host_rev;
pci_read_config_byte(host, PCI_REVISION_ID, &host_rev);
if (host_rev >= 0x30) /* 630 ET */
if (host->revision >= 0x30) /* 630 ET */
chipset = &sis100_early;
}
break;
@ -977,7 +975,6 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
u16 trueid;
u8 prefctl;
u8 idecfg;
u8 sbrev;
/* Try the second unmasking technique */
pci_read_config_byte(pdev, 0x4a, &idecfg);
@ -990,11 +987,10 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */
if (lpc_bridge == NULL)
break;
pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(pdev, 0x49, &prefctl);
pci_dev_put(lpc_bridge);
if (sbrev == 0x10 && (prefctl & 0x80)) {
if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
chipset = &sis133_early;
break;
}

5
drivers/ata/pata_sl82c105.c
View File

@ -270,7 +270,6 @@ static struct ata_port_operations sl82c105_port_ops = {
static int sl82c105_bridge_revision(struct pci_dev *pdev)
{
struct pci_dev *bridge;
u8 rev;
/*
* The bridge should be part of the same device, but function 0.
@ -292,10 +291,8 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev)
/*
* We need to find function 0's revision, not function 1
*/
pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
pci_dev_put(bridge);
return rev;
return bridge->revision;
}

6
drivers/ata/pata_via.c
View File

@ -506,7 +506,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
struct pci_dev *isa = NULL;
const struct via_isa_bridge *config;
static int printed_version;
u8 t;
u8 enable;
u32 timing;
@ -520,9 +519,8 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
!!(config->flags & VIA_BAD_ID),
config->id, NULL))) {
pci_read_config_byte(isa, PCI_REVISION_ID, &t);
if (t >= config->rev_min &&
t <= config->rev_max)
if (isa->revision >= config->rev_min &&
isa->revision <= config->rev_max)
break;
pci_dev_put(isa);
}

20
drivers/ata/sata_mv.c
View File

@ -1765,12 +1765,9 @@ static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
{
u8 rev_id;
int early_5080;
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
early_5080 = (pdev->device == 0x5080) && (rev_id == 0);
early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
if (!early_5080) {
u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
@ -2387,17 +2384,14 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct mv_host_priv *hpriv = host->private_data;
u8 rev_id;
u32 hp_flags = hpriv->hp_flags;
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
switch(board_idx) {
case chip_5080:
hpriv->ops = &mv5xxx_ops;
hp_flags |= MV_HP_GEN_I;
switch (rev_id) {
switch (pdev->revision) {
case 0x1:
hp_flags |= MV_HP_ERRATA_50XXB0;
break;
@ -2417,7 +2411,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hpriv->ops = &mv5xxx_ops;
hp_flags |= MV_HP_GEN_I;
switch (rev_id) {
switch (pdev->revision) {
case 0x0:
hp_flags |= MV_HP_ERRATA_50XXB0;
break;
@ -2437,7 +2431,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hpriv->ops = &mv6xxx_ops;
hp_flags |= MV_HP_GEN_II;
switch (rev_id) {
switch (pdev->revision) {
case 0x7:
hp_flags |= MV_HP_ERRATA_60X1B2;
break;
@ -2457,7 +2451,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hpriv->ops = &mv6xxx_ops;
hp_flags |= MV_HP_GEN_IIE;
switch (rev_id) {
switch (pdev->revision) {
case 0x0:
hp_flags |= MV_HP_ERRATA_XX42A0;
break;
@ -2585,14 +2579,12 @@ static void mv_print_info(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct mv_host_priv *hpriv = host->private_data;
u8 rev_id, scc;
u8 scc;
const char *scc_s, *gen;
/* Use this to determine the HW stepping of the chip so we know
* what errata to workaround
*/
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
if (scc == 0)
scc_s = "SCSI";

9
drivers/atm/eni.c
View File

@ -1704,7 +1704,6 @@ static int __devinit eni_do_init(struct atm_dev *dev)
struct pci_dev *pci_dev;
unsigned long real_base;
void __iomem *base;
unsigned char revision;
int error,i,last;
DPRINTK(">eni_init\n");
@ -1715,12 +1714,6 @@ static int __devinit eni_do_init(struct atm_dev *dev)
pci_dev = eni_dev->pci_dev;
real_base = pci_resource_start(pci_dev, 0);
eni_dev->irq = pci_dev->irq;
error = pci_read_config_byte(pci_dev,PCI_REVISION_ID,&revision);
if (error) {
printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
dev->number,error);
return -EINVAL;
}
if ((error = pci_write_config_word(pci_dev,PCI_COMMAND,
PCI_COMMAND_MEMORY |
(eni_dev->asic ? PCI_COMMAND_PARITY | PCI_COMMAND_SERR : 0)))) {
@ -1729,7 +1722,7 @@ static int __devinit eni_do_init(struct atm_dev *dev)
return -EIO;
}
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%lx,irq=%d,",
dev->number,revision,real_base,eni_dev->irq);
dev->number,pci_dev->revision,real_base,eni_dev->irq);
if (!(base = ioremap_nocache(real_base,MAP_MAX_SIZE))) {
printk("\n");
printk(KERN_ERR DEV_LABEL "(itf %d): can't set up page "

13
drivers/atm/idt77252.c
View File

@ -3679,7 +3679,6 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
unsigned long membase, srambase;
struct idt77252_dev *card;
struct atm_dev *dev;
ushort revision = 0;
int i, err;
@ -3688,19 +3687,13 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
return err;
}
if (pci_read_config_word(pcidev, PCI_REVISION_ID, &revision)) {
printk("idt77252-%d: can't read PCI_REVISION_ID\n", index);
err = -ENODEV;
goto err_out_disable_pdev;
}
card = kzalloc(sizeof(struct idt77252_dev), GFP_KERNEL);
if (!card) {
printk("idt77252-%d: can't allocate private data\n", index);
err = -ENOMEM;
goto err_out_disable_pdev;
}
card->revision = revision;
card->revision = pcidev->revision;
card->index = index;
card->pcidev = pcidev;
sprintf(card->name, "idt77252-%d", card->index);
@ -3762,8 +3755,8 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
}
printk("%s: ABR SAR (Rev %c): MEM %08lx SRAM %08lx [%u KB]\n",
card->name, ((revision > 1) && (revision < 25)) ?
'A' + revision - 1 : '?', membase, srambase,
card->name, ((card->revision > 1) && (card->revision < 25)) ?
'A' + card->revision - 1 : '?', membase, srambase,
card->sramsize / 1024);
if (init_card(dev)) {

11
drivers/atm/iphase.c
View File

@ -2290,7 +2290,6 @@ static int __devinit ia_init(struct atm_dev *dev)
unsigned long real_base;
void __iomem *base;
unsigned short command;
unsigned char revision;
int error, i;
/* The device has been identified and registered. Now we read
@ -2305,16 +2304,14 @@ static int __devinit ia_init(struct atm_dev *dev)
real_base = pci_resource_start (iadev->pci, 0);
iadev->irq = iadev->pci->irq;
if ((error = pci_read_config_word(iadev->pci, PCI_COMMAND,&command))
|| (error = pci_read_config_byte(iadev->pci,
PCI_REVISION_ID,&revision)))
{
error = pci_read_config_word(iadev->pci, PCI_COMMAND, &command);
if (error) {
printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%x\n",
dev->number,error);
return -EINVAL;
}
IF_INIT(printk(DEV_LABEL "(itf %d): rev.%d,realbase=0x%lx,irq=%d\n",
dev->number, revision, real_base, iadev->irq);)
dev->number, iadev->pci->revision, real_base, iadev->irq);)
/* find mapping size of board */
@ -2353,7 +2350,7 @@ static int __devinit ia_init(struct atm_dev *dev)
return error;
}
IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n",
dev->number, revision, base, iadev->irq);)
dev->number, iadev->pci->revision, base, iadev->irq);)
/* filling the iphase dev structure */
iadev->mem = iadev->pci_map_size /2;

27
drivers/atm/lanai.c
View File

@ -246,8 +246,8 @@ struct lanai_vcc {
};
enum lanai_type {
lanai2 = PCI_VENDOR_ID_EF_ATM_LANAI2,
lanaihb = PCI_VENDOR_ID_EF_ATM_LANAIHB
lanai2 = PCI_DEVICE_ID_EF_ATM_LANAI2,
lanaihb = PCI_DEVICE_ID_EF_ATM_LANAIHB
};
struct lanai_dev_stats {
@ -293,7 +293,6 @@ struct lanai_dev {
struct atm_vcc *cbrvcc;
int number;
int board_rev;
u8 pci_revision;
/* TODO - look at race conditions with maintence of conf1/conf2 */
/* TODO - transmit locking: should we use _irq not _irqsave? */
/* TODO - organize above in some rational fashion (see <asm/cache.h>) */
@ -1969,14 +1968,6 @@ static int __devinit lanai_pci_start(struct lanai_dev *lanai)
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;
}
/* Get the pci revision byte */
result = pci_read_config_byte(pci, PCI_REVISION_ID,
&lanai->pci_revision);
if (result != PCIBIOS_SUCCESSFUL) {
printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
"PCI_REVISION_ID: %d\n", lanai->number, result);
return -EINVAL;
}
result = pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &w);
if (result != PCIBIOS_SUCCESSFUL) {
printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
@ -2254,7 +2245,7 @@ static int __devinit lanai_dev_open(struct atm_dev *atmdev)
lanai_timed_poll_start(lanai);
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
"(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number,
(int) lanai->pci_revision, (unsigned long) lanai->base,
(int) lanai->pci->revision, (unsigned long) lanai->base,
lanai->pci->irq,
atmdev->esi[0], atmdev->esi[1], atmdev->esi[2],
atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]);
@ -2491,7 +2482,7 @@ static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page)
(unsigned int) lanai->magicno, lanai->num_vci);
if (left-- == 0)
return sprintf(page, "revision: board=%d, pci_if=%d\n",
lanai->board_rev, (int) lanai->pci_revision);
lanai->board_rev, (int) lanai->pci->revision);
if (left-- == 0)
return sprintf(page, "EEPROM ESI: "
"%02X:%02X:%02X:%02X:%02X:%02X\n",
@ -2631,14 +2622,8 @@ static int __devinit lanai_init_one(struct pci_dev *pci,
}
static struct pci_device_id lanai_pci_tbl[] = {
{
PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAI2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
},
{
PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAIHB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
},
{ PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) },
{ PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) },
{ 0, } /* terminal entry */
};
MODULE_DEVICE_TABLE(pci, lanai_pci_tbl);

6
drivers/atm/zatm.c
View File

@ -1182,7 +1182,6 @@ static int __devinit zatm_init(struct atm_dev *dev)
struct zatm_dev *zatm_dev;
struct pci_dev *pci_dev;
unsigned short command;
unsigned char revision;
int error,i,last;
unsigned long t0,t1,t2;
@ -1192,8 +1191,7 @@ static int __devinit zatm_init(struct atm_dev *dev)
pci_dev = zatm_dev->pci_dev;
zatm_dev->base = pci_resource_start(pci_dev, 0);
zatm_dev->irq = pci_dev->irq;
if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command)) ||
(error = pci_read_config_byte(pci_dev,PCI_REVISION_ID,&revision))) {
if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command))) {
printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
dev->number,error);
return -EINVAL;
@ -1206,7 +1204,7 @@ static int __devinit zatm_init(struct atm_dev *dev)
}
eprom_get_esi(dev);
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%x,irq=%d,",
dev->number,revision,zatm_dev->base,zatm_dev->irq);
dev->number,pci_dev->revision,zatm_dev->base,zatm_dev->irq);
/* reset uPD98401 */
zout(0,SWR);
while (!(zin(GSR) & uPD98401_INT_IND));

4
drivers/char/agp/amd-k7-agp.c
View File

@ -462,9 +462,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
* erratum 46: Setup violation on AGP SBA pins - Disable side band addressing.
* With this lot disabled, we should prevent lockups. */
if (agp_bridge->dev->device == PCI_DEVICE_ID_AMD_FE_GATE_700E) {
u8 revision=0;
pci_read_config_byte(pdev, PCI_REVISION_ID, &revision);
if (revision == 0x10 || revision == 0x11) {
if (pdev->revision == 0x10 || pdev->revision == 0x11) {
agp_bridge->flags = AGP_ERRATA_FASTWRITES;
agp_bridge->flags |= AGP_ERRATA_SBA;
agp_bridge->flags |= AGP_ERRATA_1X;

6
drivers/char/agp/amd64-agp.c
View File

@ -367,10 +367,8 @@ static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr)
static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data *bridge)
{
char *revstring;
u8 rev_id;
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
switch (rev_id) {
switch (pdev->revision) {
case 0x01: revstring="A0"; break;
case 0x02: revstring="A1"; break;
case 0x11: revstring="B0"; break;
@ -386,7 +384,7 @@ static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data
* Work around errata.
* Chips before B2 stepping incorrectly reporting v3.5
*/
if (rev_id < 0x13) {
if (pdev->revision < 0x13) {
printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
bridge->major_version = 3;
bridge->minor_version = 0;

5
drivers/clocksource/acpi_pm.c
View File

@ -105,14 +105,11 @@ static inline void acpi_pm_need_workaround(void)
*/
static void __devinit acpi_pm_check_blacklist(struct pci_dev *dev)
{
u8 rev;
if (acpi_pm_good)
return;
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
/* the bug has been fixed in PIIX4M */
if (rev < 3) {
if (dev->revision < 3) {
printk(KERN_WARNING "* Found PM-Timer Bug on the chipset."
" Due to workarounds for a bug,\n"
"* this clock source is slow. Consider trying"

3
drivers/i2c/busses/i2c-viapro.c
View File

@ -397,8 +397,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
case PCI_DEVICE_ID_VIA_82C686_4:
/* The VT82C686B (rev 0x40) does support I2C block
transactions, but the VT82C686A (rev 0x30) doesn't */
if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp)
&& temp >= 0x40)
if (pdev->revision >= 0x40)
vt596_features |= FEATURE_I2CBLOCK;
break;
}

2
drivers/ide/pci/alim15x3.c
View File

@ -508,7 +508,7 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c
u8 tmpbyte;
struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision);
m5229_revision = dev->revision;
isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);

8
drivers/ide/pci/amd74xx.c
View File

@ -123,8 +123,7 @@ static int amd74xx_get_info(char *buffer, char **addr, off_t offset, int count)
amd_print("Driver Version: 2.13");
amd_print("South Bridge: %s", pci_name(bmide_dev));
pci_read_config_byte(dev, PCI_REVISION_ID, &t);
amd_print("Revision: IDE %#x", t);
amd_print("Revision: IDE %#x", dev->revision);
amd_print("Highest DMA rate: UDMA%s", amd_dma[fls(amd_config->udma_mask) - 1]);
amd_print("BM-DMA base: %#lx", amd_base);
@ -312,8 +311,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
*/
if (amd_config->flags & AMD_CHECK_SWDMA) {
pci_read_config_byte(dev, PCI_REVISION_ID, &t);
if (t <= 7)
if (dev->revision <= 7)
amd_config->flags |= AMD_BAD_SWDMA;
}
@ -383,7 +381,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
pci_read_config_byte(dev, PCI_REVISION_ID, &t);
printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
amd_chipset->name, pci_name(dev), t,
amd_chipset->name, pci_name(dev), dev->revision,
amd_dma[fls(amd_config->udma_mask) - 1]);
/*

9
drivers/ide/pci/cmd64x.c
View File

@ -88,7 +88,6 @@ static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index)
u8 reg72 = 0, reg73 = 0; /* primary */
u8 reg7a = 0, reg7b = 0; /* secondary */
u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0; /* extra */
u8 rev = 0;
p += sprintf(p, "\nController: %d\n", index);
p += sprintf(p, "PCI-%x Chipset.\n", dev->device);
@ -103,9 +102,8 @@ static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index)
(void) pci_read_config_byte(dev, UDIDETCR1, &reg7b);
/* PCI0643/6 originally didn't have the primary channel enable bit */
(void) pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
if ((dev->device == PCI_DEVICE_ID_CMD_643) ||
(dev->device == PCI_DEVICE_ID_CMD_646 && rev < 3))
(dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 3))
reg51 |= CNTRL_ENA_1ST;
p += sprintf(p, "---------------- Primary Channel "
@ -604,14 +602,11 @@ static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d)
static int __devinit init_setup_cmd646(struct pci_dev *dev, ide_pci_device_t *d)
{
u8 rev = 0;
/*
* The original PCI0646 didn't have the primary channel enable bit,
* it appeared starting with PCI0646U (i.e. revision ID 3).
*/
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
if (rev < 3)
if (dev->revision < 3)
d->enablebits[0].reg = 0;
return ide_setup_pci_device(dev, d);

2
drivers/ide/pci/cs5530.c
View File

@ -236,7 +236,7 @@ static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const ch
*/
pci_set_master(cs5530_0);
pci_set_mwi(cs5530_0);
pci_try_set_mwi(cs5530_0);
/*
* Set PCI CacheLineSize to 16-bytes:

20
drivers/ide/pci/hpt366.c
View File

@ -1413,11 +1413,9 @@ static int __devinit init_setup_hpt372n(struct pci_dev *dev, ide_pci_device_t *d
static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
u8 rev = 0, mcr1 = 0;
u8 mcr1 = 0;
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
if (rev > 1) {
if (dev->revision > 1) {
d->name = "HPT371N";
info = &hpt371n;
@ -1442,11 +1440,8 @@ static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
u8 rev = 0;
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
if (rev > 1) {
if (dev->revision > 1) {
d->name = "HPT372N";
info = &hpt372n;
@ -1460,11 +1455,8 @@ static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d
static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
u8 rev = 0;
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
if (rev > 1) {
if (dev->revision > 1) {
d->name = "HPT302N";
info = &hpt302n;
@ -1478,7 +1470,7 @@ static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
{
struct pci_dev *dev2;
u8 rev = 0;
u8 rev = dev->revision;
static char *chipset_names[] = { "HPT366", "HPT366", "HPT368",
"HPT370", "HPT370A", "HPT372",
"HPT372N" };
@ -1489,8 +1481,6 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
if (PCI_FUNC(dev->devfn) & 1)
return -ENODEV;
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
switch (rev) {
case 0:
case 1:

6
drivers/ide/pci/piix.c
View File

@ -572,18 +572,16 @@ static void __devinit piix_check_450nx(void)
{
struct pci_dev *pdev = NULL;
u16 cfg;
u8 rev;
while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL)
{
/* Look for 450NX PXB. Check for problem configurations
A PCI quirk checks bit 6 already */
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_word(pdev, 0x41, &cfg);
/* Only on the original revision: IDE DMA can hang */
if(rev == 0x00)
if (pdev->revision == 0x00)
no_piix_dma = 1;
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
else if(cfg & (1<<14) && rev < 5)
else if (cfg & (1<<14) && pdev->revision < 5)
no_piix_dma = 2;
}
if(no_piix_dma)

13
drivers/ide/pci/serverworks.c
View File

@ -55,7 +55,6 @@ static const char *svwks_bad_ata100[] = {
NULL
};
static u8 svwks_revision = 0;
static struct pci_dev *isa_dev;
static int check_in_drive_lists (ide_drive_t *drive, const char **list)
@ -71,9 +70,6 @@ static u8 svwks_udma_filter(ide_drive_t *drive)
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 mask = 0;
if (!svwks_revision)
pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
return 0x1f;
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
@ -88,9 +84,9 @@ static u8 svwks_udma_filter(ide_drive_t *drive)
return 0;
/* Check the OSB4 DMA33 enable bit */
return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0;
} else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) {
} else if (dev->revision < SVWKS_CSB5_REVISION_NEW) {
return 0x07;
} else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) {
} else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) {
u8 btr = 0, mode;
pci_read_config_byte(dev, 0x5A, &btr);
mode = btr & 0x3;
@ -234,9 +230,6 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
unsigned int reg;
u8 btr;
/* save revision id to determine DMA capability */
pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
/* force Master Latency Timer value to 64 PCICLKs */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
@ -315,7 +308,7 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
if (!(PCI_FUNC(dev->devfn) & 1))
btr |= 0x2;
else
btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
pci_write_config_byte(dev, 0x5A, btr);
}
/* Setup HT1000 SouthBridge Controller - Single Channel Only */

8
drivers/ide/pci/sis5513.c
View File

@ -659,9 +659,7 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c
/* Special case for SiS630 : 630S/ET is ATA_100a */
if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
u8 hostrev;
pci_read_config_byte(host, PCI_REVISION_ID, &hostrev);
if (hostrev >= 0x30)
if (host->revision >= 0x30)
chipset_family = ATA_100a;
}
pci_dev_put(host);
@ -702,7 +700,6 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c
u16 trueid;
u8 prefctl;
u8 idecfg;
u8 sbrev;
pci_read_config_byte(dev, 0x4a, &idecfg);
pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
@ -712,11 +709,10 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c
if (trueid == 0x5517) { /* SiS 961/961B */
lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(dev, 0x49, &prefctl);
pci_dev_put(lpc_bridge);
if (sbrev == 0x10 && (prefctl & 0x80)) {
if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
chipset_family = ATA_133a;
} else {

4
drivers/ide/pci/sl82c105.c
View File

@ -338,7 +338,6 @@ static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio)
static unsigned int sl82c105_bridge_revision(struct pci_dev *dev)
{
struct pci_dev *bridge;
u8 rev;
/*
* The bridge should be part of the same device, but function 0.
@ -360,10 +359,9 @@ static unsigned int sl82c105_bridge_revision(struct pci_dev *dev)
/*
* We need to find function 0's revision, not function 1
*/
pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
pci_dev_put(bridge);
return rev;
return bridge->revision;
}
/*

9
drivers/ide/pci/via82cxxx.c
View File

@ -237,16 +237,14 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive)
static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
{
struct via_isa_bridge *via_config;
u8 t;
for (via_config = via_isa_bridges; via_config->id; via_config++)
if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
!!(via_config->flags & VIA_BAD_ID),
via_config->id, NULL))) {
pci_read_config_byte(*isa, PCI_REVISION_ID, &t);
if (t >= via_config->rev_min &&
t <= via_config->rev_max)
if ((*isa)->revision >= via_config->rev_min &&
(*isa)->revision <= via_config->rev_max)
break;
pci_dev_put(*isa);
}
@ -404,10 +402,9 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
* Print the boot message.
*/
pci_read_config_byte(isa, PCI_REVISION_ID, &t);
printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s "
"controller on pci%s\n",
via_config->name, t,
via_config->name, isa->revision,
via_config->udma_mask ? "U" : "MW",
via_dma[via_config->udma_mask ?
(fls(via_config->udma_mask) - 1) : 0],

9
drivers/infiniband/hw/ipath/ipath_driver.c
View File

@ -270,7 +270,6 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
struct ipath_devdata *dd;
unsigned long long addr;
u32 bar0 = 0, bar1 = 0;
u8 rev;
dd = ipath_alloc_devdata(pdev);
if (IS_ERR(dd)) {
@ -432,13 +431,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
dd->ipath_deviceid = ent->device; /* save for later use */
dd->ipath_vendorid = ent->vendor;
ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
if (ret) {
ipath_dev_err(dd, "Failed to read PCI revision ID unit "
"%u: err %d\n", dd->ipath_unit, -ret);
goto bail_regions; /* shouldn't ever happen */
}
dd->ipath_pcirev = rev;
dd->ipath_pcirev = pdev->revision;
#if defined(__powerpc__)
/* There isn't a generic way to specify writethrough mappings */

4
drivers/isdn/hisax/bkm_a8.c
View File

@ -287,7 +287,6 @@ setup_sct_quadro(struct IsdnCard *card)
#ifdef CONFIG_PCI
struct IsdnCardState *cs = card->cs;
char tmp[64];
u_char pci_rev_id;
u_int found = 0;
u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
@ -335,8 +334,7 @@ setup_sct_quadro(struct IsdnCard *card)
}
#ifdef ATTEMPT_PCI_REMAPPING
/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id);
if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) {
if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
CardType[card->typ],
sct_quadro_subtypes[cs->subtyp]);

4
drivers/media/radio/radio-gemtek-pci.c
View File

@ -94,7 +94,6 @@ struct gemtek_pci_card {
u32 iobase;
u32 length;
u8 chiprev;
u16 model;
u32 current_frequency;
@ -415,7 +414,6 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci
goto err_pci;
}
pci_read_config_byte( pci_dev, PCI_REVISION_ID, &card->chiprev );
pci_read_config_word( pci_dev, PCI_SUBSYSTEM_ID, &card->model );
pci_set_drvdata( pci_dev, card );
@ -436,7 +434,7 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci
gemtek_pci_mute( card );
printk( KERN_INFO "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
card->chiprev, card->iobase, card->iobase + card->length - 1 );
pci_dev->revision, card->iobase, card->iobase + card->length - 1 );
return 0;

4
drivers/media/video/meye.c
View File

@ -1809,7 +1809,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
{
int ret = -EBUSY;
unsigned long mchip_adr;
u8 revision;
if (meye.mchip_dev != NULL) {
printk(KERN_ERR "meye: only one device allowed!\n");
@ -1885,7 +1884,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
goto outreqirq;
}
pci_read_config_byte(meye.mchip_dev, PCI_REVISION_ID, &revision);
pci_write_config_byte(meye.mchip_dev, PCI_CACHE_LINE_SIZE, 8);
pci_write_config_byte(meye.mchip_dev, PCI_LATENCY_TIMER, 64);
@ -1939,7 +1937,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
printk(KERN_INFO "meye: Motion Eye Camera Driver v%s.\n",
MEYE_DRIVER_VERSION);
printk(KERN_INFO "meye: mchip KL5A72002 rev. %d, base %lx, irq %d\n",
revision, mchip_adr, meye.mchip_irq);
meye.mchip_dev->revision, mchip_adr, meye.mchip_irq);
return 0;

7
drivers/net/8139cp.c
View File

@ -1799,7 +1799,6 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
void __iomem *regs;
resource_size_t pciaddr;
unsigned int addr_len, i, pci_using_dac;
u8 pci_rev;
#ifndef MODULE
static int version_printed;
@ -1807,13 +1806,11 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
printk("%s", version);
#endif
pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) {
pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision < 0x20) {
dev_err(&pdev->dev,
"This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
pdev->vendor, pdev->device, pci_rev);
pdev->vendor, pdev->device, pdev->revision);
dev_err(&pdev->dev, "Try the \"8139too\" driver instead.\n");
return -ENODEV;
}

7
drivers/net/8139too.c
View File

@ -931,7 +931,6 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
int i, addr_len, option;
void __iomem *ioaddr;
static int board_idx = -1;
u8 pci_rev;
assert (pdev != NULL);
assert (ent != NULL);
@ -949,13 +948,11 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
}
#endif
pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) {
pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
dev_info(&pdev->dev,
"This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
pdev->vendor, pdev->device, pci_rev);
pdev->vendor, pdev->device, pdev->revision);
dev_info(&pdev->dev,
"Use the \"8139cp\" driver for improved performance and stability.\n");
}

1
drivers/net/atl1/atl1.h
View File

@ -210,7 +210,6 @@ struct atl1_hw {
u16 phy_spd_default;
u16 dev_rev;
u8 revision_id;
/* spi flash */
u8 flash_vendor;

4
drivers/net/atl1/atl1_main.c
View File

@ -118,10 +118,6 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
{
struct atl1_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
/* PCI config space info */
pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;

5
drivers/net/bnx2.c
View File

@ -6736,10 +6736,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
while ((amd_8132 = pci_get_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_8132_BRIDGE,
amd_8132))) {
u8 rev;
pci_read_config_byte(amd_8132, PCI_REVISION_ID, &rev);
if (rev >= 0x10 && rev <= 0x13) {
if (amd_8132->revision >= 0x10 &&
amd_8132->revision <= 0x13) {
disable_msi = 1;
pci_dev_put(amd_8132);
break;

12
drivers/net/cassini.c
View File

@ -3422,21 +3422,19 @@ static int cas_get_vpd_info(struct cas *cp, unsigned char *dev_addr,
static void cas_check_pci_invariants(struct cas *cp)
{
struct pci_dev *pdev = cp->pdev;
u8 rev;
cp->cas_flags = 0;
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
if ((pdev->vendor == PCI_VENDOR_ID_SUN) &&
(pdev->device == PCI_DEVICE_ID_SUN_CASSINI)) {
if (rev >= CAS_ID_REVPLUS)
if (pdev->revision >= CAS_ID_REVPLUS)
cp->cas_flags |= CAS_FLAG_REG_PLUS;
if (rev < CAS_ID_REVPLUS02u)
if (pdev->revision < CAS_ID_REVPLUS02u)
cp->cas_flags |= CAS_FLAG_TARGET_ABORT;
/* Original Cassini supports HW CSUM, but it's not
* enabled by default as it can trigger TX hangs.
*/
if (rev < CAS_ID_REV2)
if (pdev->revision < CAS_ID_REV2)
cp->cas_flags |= CAS_FLAG_NO_HW_CSUM;
} else {
/* Only sun has original cassini chips. */
@ -4919,13 +4917,13 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
pci_cmd &= ~PCI_COMMAND_SERR;
pci_cmd |= PCI_COMMAND_PARITY;
pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
if (pci_set_mwi(pdev))
if (pci_try_set_mwi(pdev))
printk(KERN_WARNING PFX "Could not enable MWI for %s\n",
pci_name(pdev));
/*
* On some architectures, the default cache line size set
* by pci_set_mwi reduces perforamnce. We have to increase
* by pci_try_set_mwi reduces perforamnce. We have to increase
* it for this case. To start, we'll print some configuration
* data.
*/

3
drivers/net/dl2k.c
View File

@ -250,7 +250,6 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
np->an_enable = 1;
mii_set_media (dev);
}
pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);
err = register_netdev (dev);
if (err)
@ -879,7 +878,7 @@ receive_packet (struct net_device *dev)
skb->protocol = eth_type_trans (skb, dev);
#if 0
/* Checksum done by hw, but csum value unavailable. */
if (np->pci_rev_id >= 0x0c &&
if (np->pdev->pci_rev_id >= 0x0c &&
!(frame_status & (TCPError | UDPError | IPError))) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
}

1
drivers/net/dl2k.h
View File

@ -668,7 +668,6 @@ struct netdev_private {
unsigned int rx_flow:1; /* Rx flow control enable */
unsigned int phy_media:1; /* 1: fiber, 0: copper */
unsigned int link_status:1; /* Current link status */
unsigned char pci_rev_id; /* PCI revision ID */
struct netdev_desc *last_tx; /* Last Tx descriptor used. */
unsigned long cur_rx, old_rx; /* Producer/consumer ring indices */
unsigned long cur_tx, old_tx;

8
drivers/net/e100.c
View File

@ -583,7 +583,6 @@ struct nic {
u32 rx_tco_frames;
u32 rx_over_length_errors;
u8 rev_id;
u16 leds;
u16 eeprom_wc;
u16 eeprom[256];
@ -937,9 +936,8 @@ static void e100_get_defaults(struct nic *nic)
struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->rev_id;
nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
if(nic->mac == mac_unknown)
nic->mac = mac_82557_D100_A;
@ -1279,7 +1277,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb
if (nic->flags & ich)
goto noloaducode;
/* Search for ucode match against h/w rev_id */
/* Search for ucode match against h/w revision */
for (opts = ucode_opts; opts->mac; opts++) {
int i;
u32 *ucode = opts->ucode;
@ -2238,7 +2236,7 @@ static void e100_get_regs(struct net_device *netdev,
u32 *buff = p;
int i;
regs->version = (1 << 24) | nic->rev_id;
regs->version = (1 << 24) | nic->pdev->revision;
buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
ioread8(&nic->csr->scb.cmd_lo) << 16 |
ioread16(&nic->csr->scb.status);

3
drivers/net/e1000/e1000_main.c
View File

@ -1266,8 +1266,7 @@ e1000_sw_init(struct e1000_adapter *adapter)
hw->device_id = pdev->device;
hw->subsystem_vendor_id = pdev->subsystem_vendor;
hw->subsystem_id = pdev->subsystem_device;
pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
hw->revision_id = pdev->revision;
pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);

4
drivers/net/forcedeth.c
View File

@ -5084,15 +5084,13 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
np->wolenabled = 0;
if (id->driver_data & DEV_HAS_POWER_CNTRL) {
u8 revision_id;
pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id);
/* take phy and nic out of low power mode */
powerstate = readl(base + NvRegPowerState2);
powerstate &= ~NVREG_POWERSTATE2_POWERUP_MASK;
if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 ||
id->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) &&
revision_id >= 0xA3)
pci_dev->revision >= 0xA3)
powerstate |= NVREG_POWERSTATE2_POWERUP_REV_A3;
writel(powerstate, base + NvRegPowerState2);
}

7
drivers/net/netxen/netxen_nic_main.c
View File

@ -54,8 +54,6 @@ static char netxen_nic_driver_string[] = "NetXen Network Driver version "
#define NETXEN_ADAPTER_UP_MAGIC 777
#define NETXEN_NIC_PEG_TUNE 0
u8 nx_p2_id = NX_P2_C0;
#define DMA_32BIT_MASK 0x00000000ffffffffULL
#define DMA_35BIT_MASK 0x00000007ffffffffULL
@ -307,8 +305,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_disable_pdev;
pci_set_master(pdev);
pci_read_config_byte(pdev, PCI_REVISION_ID, &nx_p2_id);
if (nx_p2_id == NX_P2_C1 &&
if (pdev->revision == NX_P2_C1 &&
(pci_set_dma_mask(pdev, DMA_35BIT_MASK) == 0) &&
(pci_set_consistent_dma_mask(pdev, DMA_35BIT_MASK) == 0)) {
pci_using_dac = 1;
@ -552,7 +549,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
adapter->ahw.pdev = pdev;
adapter->proc_cmd_buf_counter = 0;
adapter->ahw.revision_id = nx_p2_id;
adapter->ahw.revision_id = pdev->revision;
/* make sure Window == 1 */
netxen_nic_pci_change_crbwindow(adapter, 1);

25
drivers/net/s2io.c
View File

@ -1135,7 +1135,7 @@ static int init_nic(struct s2io_nic *nic)
* SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
*/
if ((nic->device_type == XFRAME_I_DEVICE) &&
(get_xena_rev_id(nic->pdev) < 4))
(nic->pdev->revision < 4))
writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
val64 = readq(&bar0->tx_fifo_partition_0);
@ -1873,7 +1873,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
herc = (sp->device_type == XFRAME_II_DEVICE);
if (flag == FALSE) {
if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
if ((!herc && (sp->pdev->revision >= 4)) || herc) {
if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
ret = 1;
} else {
@ -1881,7 +1881,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
ret = 1;
}
} else {
if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
if ((!herc && (sp->pdev->revision >= 4)) || herc) {
if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
ADAPTER_STATUS_RMAC_PCC_IDLE))
ret = 1;
@ -7075,23 +7075,6 @@ static void s2io_link(struct s2io_nic * sp, int link)
sp->start_time = jiffies;
}
/**
* get_xena_rev_id - to identify revision ID of xena.
* @pdev : PCI Dev structure
* Description:
* Function to identify the Revision ID of xena.
* Return value:
* returns the revision ID of the device.
*/
static int get_xena_rev_id(struct pci_dev *pdev)
{
u8 id = 0;
int ret;
ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
return id;
}
/**
* s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
* @sp : private member of the device structure, which is a pointer to the
@ -7550,7 +7533,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
s2io_vpd_read(sp);
DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
sp->product_name, get_xena_rev_id(sp->pdev));
sp->product_name, pdev->revision);
DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
s2io_driver_version);
DBG_PRINT(ERR_DBG, "%s: MAC ADDR: "

1
drivers/net/s2io.h
View File

@ -1033,7 +1033,6 @@ static void s2io_set_link(struct work_struct *work);
static int s2io_set_swapper(struct s2io_nic * sp);
static void s2io_card_down(struct s2io_nic *nic);
static int s2io_card_up(struct s2io_nic *nic);
static int get_xena_rev_id(struct pci_dev *pdev);
static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
int bit_state);
static int s2io_add_isr(struct s2io_nic * sp);

2
drivers/net/starfire.c
View File

@ -740,7 +740,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
pci_set_master(pdev);
/* enable MWI -- it vastly improves Rx performance on sparc64 */
pci_set_mwi(pdev);
pci_try_set_mwi(pdev);
#ifdef ZEROCOPY
/* Starfire can do TCP/UDP checksumming */

7
drivers/net/sundance.c
View File

@ -397,7 +397,6 @@ struct netdev_private {
unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */
struct pci_dev *pci_dev;
void __iomem *base;
unsigned char pci_rev_id;
};
/* The station address location in the EEPROM. */
@ -544,8 +543,6 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
dev->change_mtu = &change_mtu;
pci_set_drvdata(pdev, dev);
pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);
i = register_netdev(dev);
if (i)
goto err_out_unmap_rx;
@ -828,7 +825,7 @@ static int netdev_open(struct net_device *dev)
iowrite8(100, ioaddr + RxDMAPollPeriod);
iowrite8(127, ioaddr + TxDMAPollPeriod);
/* Fix DFE-580TX packet drop issue */
if (np->pci_rev_id >= 0x14)
if (np->pci_dev->revision >= 0x14)
iowrite8(0x01, ioaddr + DebugCtrl1);
netif_start_queue(dev);
@ -1194,7 +1191,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
hw_frame_id = ioread8(ioaddr + TxFrameId);
}
if (np->pci_rev_id >= 0x14) {
if (np->pci_dev->revision >= 0x14) {
spin_lock(&np->lock);
for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
int entry = np->dirty_tx % TX_RING_SIZE;

8
drivers/net/sunhme.c
View File

@ -3095,12 +3095,8 @@ static int __devinit happy_meal_pci_probe(struct pci_dev *pdev,
#ifdef CONFIG_SPARC
hp->hm_revision = of_getintprop_default(dp, "hm-rev", 0xff);
if (hp->hm_revision == 0xff) {
unsigned char prev;
pci_read_config_byte(pdev, PCI_REVISION_ID, &prev);
hp->hm_revision = 0xc0 | (prev & 0x0f);
}
if (hp->hm_revision == 0xff)
hp->hm_revision = 0xc0 | (pdev->revision & 0x0f);
#else
/* works with this on non-sparc hosts */
hp->hm_revision = 0x20;

6
drivers/net/tg3.c
View File

@ -10551,11 +10551,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
continue;
}
if (pci_id->rev != PCI_ANY_ID) {
u8 rev;
pci_read_config_byte(bridge, PCI_REVISION_ID,
&rev);
if (rev > pci_id->rev)
if (bridge->revision > pci_id->rev)
continue;
}
if (bridge->subordinate &&

5
drivers/net/tlan.c
View File

@ -533,7 +533,6 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
struct net_device *dev;
TLanPrivateInfo *priv;
u8 pci_rev;
u16 device_id;
int reg, rc = -ENODEV;
@ -577,8 +576,6 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
goto err_out_free_dev;
}
pci_read_config_byte ( pdev, PCI_REVISION_ID, &pci_rev);
for ( reg= 0; reg <= 5; reg ++ ) {
if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
pci_io_base = pci_resource_start(pdev, reg);
@ -595,7 +592,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
dev->base_addr = pci_io_base;
dev->irq = pdev->irq;
priv->adapterRev = pci_rev;
priv->adapterRev = pdev->revision;
pci_set_master(pdev);
pci_set_drvdata(pdev, dev);

8
drivers/net/tulip/de4x5.c
View File

@ -2134,7 +2134,7 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
u_short vendor, status;
u_int irq = 0, device;
u_long iobase = 0; /* Clear upper 32 bits in Alphas */
int i, j, cfrv;
int i, j;
struct de4x5_private *lp = netdev_priv(dev);
struct list_head *walk;
@ -2150,7 +2150,6 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
/* Get the chip configuration revision register */
pb = this_dev->bus->number;
pci_read_config_dword(this_dev, PCI_REVISION_ID, &cfrv);
/* Set the device number information */
lp->device = PCI_SLOT(this_dev->devfn);
@ -2158,7 +2157,8 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
/* Set the chipset information */
if (is_DC2114x) {
device = ((cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK
? DC21142 : DC21143);
}
lp->chipset = device;
@ -2254,7 +2254,7 @@ static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
}
/* Get the chip configuration revision register */
pci_read_config_dword(pdev, PCI_REVISION_ID, &lp->cfrv);
lp->cfrv = pdev->revision;
/* Set the device number information */
lp->device = dev_num;

26
drivers/net/tulip/dmfe.c
View File

@ -181,11 +181,12 @@
udelay(5);
#define __CHK_IO_SIZE(pci_id, dev_rev) \
(( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \
(( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \
DM9102A_IO_SIZE: DM9102_IO_SIZE)
#define CHK_IO_SIZE(pci_dev, dev_rev) \
(__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev))
#define CHK_IO_SIZE(pci_dev) \
(__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \
(pci_dev)->revision))
/* Sten Check */
#define DEVICE net_device
@ -205,7 +206,7 @@ struct rx_desc {
struct dmfe_board_info {
u32 chip_id; /* Chip vendor/Device ID */
u32 chip_revision; /* Chip revision */
u8 chip_revision; /* Chip revision */
struct DEVICE *next_dev; /* next device */
struct pci_dev *pdev; /* PCI device */
spinlock_t lock;
@ -359,7 +360,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
{
struct dmfe_board_info *db; /* board information structure */
struct net_device *dev;
u32 dev_rev, pci_pmr;
u32 pci_pmr;
int i, err;
DMFE_DBUG(0, "dmfe_init_one()", 0);
@ -392,10 +393,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
goto err_out_disable;
}
/* Read Chip revision */
pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) {
if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) {
printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
err = -ENODEV;
goto err_out_disable;
@ -433,7 +431,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
db->chip_id = ent->driver_data;
db->ioaddr = pci_resource_start(pdev, 0);
db->chip_revision = dev_rev;
db->chip_revision = pdev->revision;
db->wol_mode = 0;
db->pdev = pdev;
@ -455,7 +453,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
pci_read_config_dword(pdev, 0x50, &pci_pmr);
pci_pmr &= 0x70000;
if ( (pci_pmr == 0x10000) && (dev_rev == 0x02000031) )
if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) )
db->chip_type = 1; /* DM9102A E3 */
else
db->chip_type = 0;
@ -553,7 +551,7 @@ static int dmfe_open(struct DEVICE *dev)
/* CR6 operation mode decision */
if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
(db->chip_revision >= 0x02000030) ) {
(db->chip_revision >= 0x30) ) {
db->cr6_data |= DMFE_TXTH_256;
db->cr0_data = CR0_DEFAULT;
db->dm910x_chk_mode=4; /* Enter the normal mode */
@ -1199,9 +1197,9 @@ static void dmfe_timer(unsigned long data)
tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */
if ( ((db->chip_id == PCI_DM9102_ID) &&
(db->chip_revision == 0x02000030)) ||
(db->chip_revision == 0x30)) ||
((db->chip_id == PCI_DM9132_ID) &&
(db->chip_revision == 0x02000010)) ) {
(db->chip_revision == 0x10)) ) {
/* DM9102A Chip */
if (tmp_cr12 & 2)
link_ok = 0;

15
drivers/net/tulip/tulip_core.c
View File

@ -1155,7 +1155,7 @@ static void __devinit tulip_mwi_config (struct pci_dev *pdev,
/* set or disable MWI in the standard PCI command bit.
* Check for the case where mwi is desired but not available
*/
if (csr0 & MWI) pci_set_mwi(pdev);
if (csr0 & MWI) pci_try_set_mwi(pdev);
else pci_clear_mwi(pdev);
/* read result from hardware (in case bit refused to enable) */
@ -1238,7 +1238,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
};
static int last_irq;
static int multiport_cnt; /* For four-port boards w/one EEPROM */
u8 chip_rev;
int i, irq;
unsigned short sum;
unsigned char *ee_data;
@ -1274,10 +1273,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (pdev->vendor == 0x1282 && pdev->device == 0x9100)
{
u32 dev_rev;
/* Read Chip revision */
pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
if(dev_rev < 0x02000030)
if (pdev->revision < 0x02000030)
{
printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
return -ENODEV;
@ -1360,8 +1357,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (!ioaddr)
goto err_out_free_res;
pci_read_config_byte (pdev, PCI_REVISION_ID, &chip_rev);
/*
* initialize private data structure 'tp'
* it is zeroed and aligned in alloc_etherdev
@ -1382,7 +1377,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
tp->flags = tulip_tbl[chip_idx].flags;
tp->pdev = pdev;
tp->base_addr = ioaddr;
tp->revision = chip_rev;
tp->revision = pdev->revision;
tp->csr0 = csr0;
spin_lock_init(&tp->lock);
spin_lock_init(&tp->mii_lock);
@ -1399,7 +1394,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
tulip_mwi_config (pdev, dev);
#else
/* MWI is broken for DC21143 rev 65... */
if (chip_idx == DC21143 && chip_rev == 65)
if (chip_idx == DC21143 && pdev->revision == 65)
tp->csr0 &= ~MWI;
#endif
@ -1640,7 +1635,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
#else
"Port"
#endif
" %#llx,", dev->name, chip_name, chip_rev,
" %#llx,", dev->name, chip_name, pdev->revision,
(unsigned long long) pci_resource_start(pdev, TULIP_BAR));
pci_set_drvdata(pdev, dev);

5
drivers/net/tulip/xircom_cb.c
View File

@ -205,7 +205,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
{
struct net_device *dev = NULL;
struct xircom_private *private;
unsigned char chip_rev;
unsigned long flags;
unsigned short tmp16;
enter("xircom_probe");
@ -224,8 +223,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
pci_read_config_word (pdev,PCI_STATUS, &tmp16);
pci_write_config_word (pdev, PCI_STATUS,tmp16);
pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
return -ENODEV;
@ -286,7 +283,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
goto reg_fail;
}
printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, chip_rev, pdev->irq);
printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, pdev->revision, pdev->irq);
/* start the transmitter to get a heartbeat */
/* TODO: send 2 dummy packets here */
transceiver_voodoo(private);

4
drivers/net/tulip/xircom_tulip_cb.c
View File

@ -524,7 +524,6 @@ static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_devi
int chip_idx = id->driver_data;
long ioaddr;
int i;
u8 chip_rev;
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
@ -620,9 +619,8 @@ static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_devi
if (register_netdev(dev))
goto err_out_cleardev;
pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
printk(KERN_INFO "%s: %s rev %d at %#3lx,",
dev->name, xircom_tbl[chip_idx].chip_name, chip_rev, ioaddr);
dev->name, xircom_tbl[chip_idx].chip_name, pdev->revision, ioaddr);
for (i = 0; i < 6; i++)
printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]);
printk(", IRQ %d.\n", dev->irq);

7
drivers/net/typhoon.c
View File

@ -2267,12 +2267,6 @@ typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
typhoon_resume(pdev);
return -EBUSY;
}
static int
typhoon_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable)
{
return pci_enable_wake(pdev, state, enable);
}
#endif
static int __devinit
@ -2636,7 +2630,6 @@ static struct pci_driver typhoon_driver = {
#ifdef CONFIG_PM
.suspend = typhoon_suspend,
.resume = typhoon_resume,
.enable_wake = typhoon_enable_wake,
#endif
};

13
drivers/net/via-rhine.c
View File

@ -622,7 +622,6 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
struct net_device *dev;
struct rhine_private *rp;
int i, rc;
u8 pci_rev;
u32 quirks;
long pioaddr;
long memaddr;
@ -642,27 +641,25 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
printk(version);
#endif
pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
io_size = 256;
phy_id = 0;
quirks = 0;
name = "Rhine";
if (pci_rev < VTunknown0) {
if (pdev->revision < VTunknown0) {
quirks = rqRhineI;
io_size = 128;
}
else if (pci_rev >= VT6102) {
else if (pdev->revision >= VT6102) {
quirks = rqWOL | rqForceReset;
if (pci_rev < VT6105) {
if (pdev->revision < VT6105) {
name = "Rhine II";
quirks |= rqStatusWBRace; /* Rhine-II exclusive */
}
else {
phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */
if (pci_rev >= VT6105_B0)
if (pdev->revision >= VT6105_B0)
quirks |= rq6patterns;
if (pci_rev < VT6105M)
if (pdev->revision < VT6105M)
name = "Rhine III";
else
name = "Rhine III (Management Adapter)";

3
drivers/net/via-velocity.c
View File

@ -890,8 +890,7 @@ static void __devinit velocity_init_info(struct pci_dev *pdev,
static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
{
if (pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0)
return -EIO;
vptr->rev_id = pdev->revision;
pci_set_master(pdev);

4
drivers/net/wan/pc300_drv.c
View File

@ -3439,7 +3439,6 @@ static int __devinit
cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int first_time = 1;
ucchar cpc_rev_id;
int err, eeprom_outdated = 0;
ucshort device_id;
pc300_t *card;
@ -3480,7 +3479,6 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
card->hw.falcsize = pci_resource_len(pdev, 4);
card->hw.plxphys = pci_resource_start(pdev, 5);
card->hw.plxsize = pci_resource_len(pdev, 5);
pci_read_config_byte(pdev, PCI_REVISION_ID, &cpc_rev_id);
switch (device_id) {
case PCI_DEVICE_ID_PC300_RX_1:
@ -3498,7 +3496,7 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
#ifdef PC300_DEBUG_PCI
printk("cpc (bus=0x0%x,pci_id=0x%x,", pdev->bus->number, pdev->devfn);
printk("rev_id=%d) IRQ%d\n", cpc_rev_id, card->hw.irq);
printk("rev_id=%d) IRQ%d\n", pdev->revision, card->hw.irq);
printk("cpc:found ramaddr=0x%08lx plxaddr=0x%08lx "
"ctladdr=0x%08lx falcaddr=0x%08lx\n",
card->hw.ramphys, card->hw.plxphys, card->hw.scaphys,

2
drivers/net/wan/pc300too.c
View File

@ -311,7 +311,6 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
card_t *card;
u8 rev_id;
u32 __iomem *p;
int i;
u32 ramsize;
@ -366,7 +365,6 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
return -ENOMEM;
}
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {

2
drivers/net/wan/pci200syn.c
View File

@ -289,7 +289,6 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
card_t *card;
u8 rev_id;
u32 __iomem *p;
int i;
u32 ramsize;
@ -330,7 +329,6 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
return -ENOMEM;
}
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {

6
drivers/net/wireless/bcm43xx/bcm43xx_main.c
View File

@ -3741,10 +3741,8 @@ static int bcm43xx_attach_board(struct bcm43xx_private *bcm)
&bcm->board_type);
if (err)
goto err_iounmap;
err = bcm43xx_pci_read_config16(bcm, PCI_REVISION_ID,
&bcm->board_revision);
if (err)
goto err_iounmap;
bcm->board_revision = bcm->pci_dev->revision;
err = bcm43xx_chipset_attach(bcm);
if (err)

2
drivers/net/wireless/hostap/hostap_pci.c
View File

@ -453,8 +453,6 @@ static struct pci_driver prism2_pci_drv_id = {
.suspend = prism2_pci_suspend,
.resume = prism2_pci_resume,
#endif /* CONFIG_PM */
/* Linux 2.4.6 added save_state and enable_wake that are not used here
*/
};

3
drivers/net/wireless/hostap/hostap_plx.c
View File

@ -613,9 +613,6 @@ static struct pci_driver prism2_plx_drv_id = {
.id_table = prism2_plx_id_table,
.probe = prism2_plx_probe,
.remove = prism2_plx_remove,
.suspend = NULL,
.resume = NULL,
.enable_wake = NULL
};

4
drivers/net/wireless/prism54/islpci_hotplug.c
View File

@ -87,7 +87,6 @@ static struct pci_driver prism54_driver = {
.remove = prism54_remove,
.suspend = prism54_suspend,
.resume = prism54_resume,
/* .enable_wake ; we don't support this yet */
};
/******************************************************************************
@ -167,8 +166,7 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_master(pdev);
/* enable MWI */
if (!pci_set_mwi(pdev))
printk(KERN_INFO "%s: pci_set_mwi(pdev) succeeded\n", DRV_NAME);
pci_try_set_mwi(pdev);
/* setup the network device interface and its structure */
if (!(ndev = islpci_setup(pdev))) {

4
drivers/pci/Makefile
View File

@ -41,9 +41,7 @@ obj-$(CONFIG_ACPI) += pci-acpi.o
# Cardbus & CompactPCI use setup-bus
obj-$(CONFIG_HOTPLUG) += setup-bus.o
ifndef CONFIG_X86
obj-y += syscall.o
endif
obj-$(CONFIG_PCI_SYSCALL) += syscall.o
ifeq ($(CONFIG_PCI_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG

1
drivers/pci/hotplug/acpiphp.h
View File

@ -211,6 +211,7 @@ typedef int (*acpiphp_callback)(struct acpiphp_slot *slot, void *data);
extern int acpiphp_enable_slot (struct acpiphp_slot *slot);
extern int acpiphp_disable_slot (struct acpiphp_slot *slot);
extern int acpiphp_eject_slot (struct acpiphp_slot *slot);
extern u8 acpiphp_get_power_status (struct acpiphp_slot *slot);
extern u8 acpiphp_get_attention_status (struct acpiphp_slot *slot);
extern u8 acpiphp_get_latch_status (struct acpiphp_slot *slot);

6
drivers/pci/hotplug/acpiphp_core.c
View File

@ -156,11 +156,15 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
/* disable the specified slot */
return acpiphp_disable_slot(slot->acpi_slot);
retval = acpiphp_disable_slot(slot->acpi_slot);
if (!retval)
retval = acpiphp_eject_slot(slot->acpi_slot);
return retval;
}

53
drivers/pci/hotplug/acpiphp_glue.c
View File

@ -1282,7 +1282,7 @@ static unsigned int get_slot_status(struct acpiphp_slot *slot)
/**
* acpiphp_eject_slot - physically eject the slot
*/
static int acpiphp_eject_slot(struct acpiphp_slot *slot)
int acpiphp_eject_slot(struct acpiphp_slot *slot)
{
acpi_status status;
struct acpiphp_func *func;
@ -1368,6 +1368,9 @@ static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
return;
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
return;
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
bridge->hpp.t0->cache_line_size);
pci_write_config_byte(dev, PCI_LATENCY_TIMER,
@ -1502,6 +1505,37 @@ static void handle_bridge_insertion(acpi_handle handle, u32 type)
* ACPI event handlers
*/
static acpi_status
count_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
{
int *count = (int *)context;
struct acpiphp_bridge *bridge;
bridge = acpiphp_handle_to_bridge(handle);
if (bridge)
(*count)++;
return AE_OK ;
}
static acpi_status
check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
{
struct acpiphp_bridge *bridge;
char objname[64];
struct acpi_buffer buffer = { .length = sizeof(objname),
.pointer = objname };
bridge = acpiphp_handle_to_bridge(handle);
if (bridge) {
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
dbg("%s: re-enumerating slots under %s\n",
__FUNCTION__, objname);
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
acpiphp_check_bridge(bridge);
}
return AE_OK ;
}
/**
* handle_hotplug_event_bridge - handle ACPI event on bridges
*
@ -1519,6 +1553,7 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
struct acpi_buffer buffer = { .length = sizeof(objname),
.pointer = objname };
struct acpi_device *device;
int num_sub_bridges = 0;
if (acpi_bus_get_device(handle, &device)) {
/* This bridge must have just been physically inserted */
@ -1527,7 +1562,12 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
}
bridge = acpiphp_handle_to_bridge(handle);
if (!bridge) {
if (type == ACPI_NOTIFY_BUS_CHECK) {
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, ACPI_UINT32_MAX,
count_sub_bridges, &num_sub_bridges, NULL);
}
if (!bridge && !num_sub_bridges) {
err("cannot get bridge info\n");
return;
}
@ -1538,7 +1578,14 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
case ACPI_NOTIFY_BUS_CHECK:
/* bus re-enumerate */
dbg("%s: Bus check notify on %s\n", __FUNCTION__, objname);
acpiphp_check_bridge(bridge);
if (bridge) {
dbg("%s: re-enumerating slots under %s\n",
__FUNCTION__, objname);
acpiphp_check_bridge(bridge);
}
if (num_sub_bridges)
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL);
break;
case ACPI_NOTIFY_DEVICE_CHECK:

66
drivers/pci/hotplug/cpci_hotplug_core.c
View File

@ -35,6 +35,7 @@
#include <linux/smp_lock.h>
#include <asm/atomic.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include "cpci_hotplug.h"
#define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>"
@ -59,9 +60,8 @@ static int slots;
static atomic_t extracting;
int cpci_debug;
static struct cpci_hp_controller *controller;
static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */
static struct semaphore thread_exit; /* guard ensure thread has exited before calling it quits */
static int thread_finished = 1;
static struct task_struct *cpci_thread;
static int thread_finished;
static int enable_slot(struct hotplug_slot *slot);
static int disable_slot(struct hotplug_slot *slot);
@ -357,9 +357,7 @@ cpci_hp_intr(int irq, void *data)
controller->ops->disable_irq();
/* Trigger processing by the event thread */
dbg("Signal event_semaphore");
up(&event_semaphore);
dbg("exited cpci_hp_intr");
wake_up_process(cpci_thread);
return IRQ_HANDLED;
}
@ -521,17 +519,12 @@ event_thread(void *data)
{
int rc;
lock_kernel();
daemonize("cpci_hp_eventd");
unlock_kernel();
dbg("%s - event thread started", __FUNCTION__);
while (1) {
dbg("event thread sleeping");
down_interruptible(&event_semaphore);
dbg("event thread woken, thread_finished = %d",
thread_finished);
if (thread_finished || signal_pending(current))
set_current_state(TASK_INTERRUPTIBLE);
schedule();
if (kthread_should_stop())
break;
do {
rc = check_slots();
@ -541,18 +534,17 @@ event_thread(void *data)
} else if (rc < 0) {
dbg("%s - error checking slots", __FUNCTION__);
thread_finished = 1;
break;
goto out;
}
} while (atomic_read(&extracting) && !thread_finished);
if (thread_finished)
} while (atomic_read(&extracting) && !kthread_should_stop());
if (kthread_should_stop())
break;
/* Re-enable ENUM# interrupt */
dbg("%s - re-enabling irq", __FUNCTION__);
controller->ops->enable_irq();
}
dbg("%s - event thread signals exit", __FUNCTION__);
up(&thread_exit);
out:
return 0;
}
@ -562,12 +554,8 @@ poll_thread(void *data)
{
int rc;
lock_kernel();
daemonize("cpci_hp_polld");
unlock_kernel();
while (1) {
if (thread_finished || signal_pending(current))
if (kthread_should_stop() || signal_pending(current))
break;
if (controller->ops->query_enum()) {
do {
@ -578,48 +566,36 @@ poll_thread(void *data)
} else if (rc < 0) {
dbg("%s - error checking slots", __FUNCTION__);
thread_finished = 1;
break;
goto out;
}
} while (atomic_read(&extracting) && !thread_finished);
} while (atomic_read(&extracting) && !kthread_should_stop());
}
msleep(100);
}
dbg("poll thread signals exit");
up(&thread_exit);
out:
return 0;
}
static int
cpci_start_thread(void)
{
int pid;
/* initialize our semaphores */
init_MUTEX_LOCKED(&event_semaphore);
init_MUTEX_LOCKED(&thread_exit);
thread_finished = 0;
if (controller->irq)
pid = kernel_thread(event_thread, NULL, 0);
cpci_thread = kthread_run(event_thread, NULL, "cpci_hp_eventd");
else
pid = kernel_thread(poll_thread, NULL, 0);
if (pid < 0) {
cpci_thread = kthread_run(poll_thread, NULL, "cpci_hp_polld");
if (IS_ERR(cpci_thread)) {
err("Can't start up our thread");
return -1;
return PTR_ERR(cpci_thread);
}
dbg("Our thread pid = %d", pid);
thread_finished = 0;
return 0;
}
static void
cpci_stop_thread(void)
{
kthread_stop(cpci_thread);
thread_finished = 1;
dbg("thread finish command given");
if (controller->irq)
up(&event_semaphore);
dbg("wait for thread to exit");
down(&thread_exit);
}
int

2
drivers/pci/hotplug/cpci_hotplug_pci.c
View File

@ -45,8 +45,6 @@ extern int cpci_debug;
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
u8 cpci_get_attention_status(struct slot* slot)
{

12
drivers/pci/hotplug/cpqphp_core.c
View File

@ -796,7 +796,6 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
u8 num_of_slots = 0;
u8 hp_slot = 0;
u8 device;
u8 rev;
u8 bus_cap;
u16 temp_word;
u16 vendor_id;
@ -823,9 +822,8 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
dbg("Vendor ID: %x\n", vendor_id);
rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
dbg("revision: %d\n", rev);
if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) {
dbg("revision: %d\n", pdev->revision);
if ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!pdev->revision)) {
err(msg_HPC_rev_error);
rc = -ENODEV;
goto err_disable_device;
@ -836,7 +834,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
* For Intel, each SSID bit identifies a PHP capability.
* Also Intel HPC's may have RID=0.
*/
if ((rev > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
// TODO: This code can be made to support non-Compaq or Intel subsystem IDs
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
if (rc) {
@ -870,7 +868,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
switch (subsystem_vid) {
case PCI_VENDOR_ID_COMPAQ:
if (rev >= 0x13) { /* CIOBX */
if (pdev->revision >= 0x13) { /* CIOBX */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
ctrl->push_button = 1;
@ -1075,7 +1073,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
memcpy(ctrl->pci_bus, pdev->bus, sizeof(*ctrl->pci_bus));
ctrl->bus = pdev->bus->number;
ctrl->rev = rev;
ctrl->rev = pdev->revision;
dbg("bus device function rev: %d %d %d %d\n", ctrl->bus,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), ctrl->rev);

Some files were not shown because too many files have changed in this diff Show More