mirror of https://gitee.com/openkylin/linux.git
staging: et131x: Remove even more forward declarations
Moved functions in et131x.c file to remove the forward declarations of: et1310_in_phy_coma et1310_phy_access_mii_bit et131x_phy_mii_read et131x_mii_write et131x_rx_dma_memory_free Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Mark Einon
Greg Kroah-Hartman
parent
a4d444bdef
commit
2288760e3b
|
|
@ -576,15 +576,6 @@ struct et131x_adapter {
|
||||||
struct net_device_stats net_stats;
|
struct net_device_stats net_stats;
|
||||||
};
|
};
|
||||||
|
|
||||||
int et1310_in_phy_coma(struct et131x_adapter *adapter);
|
|
||||||
void et1310_phy_access_mii_bit(struct et131x_adapter *adapter,
|
|
||||||
u16 action,
|
|
||||||
u16 regnum, u16 bitnum, u8 *value);
|
|
||||||
int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr,
|
|
||||||
u8 reg, u16 *value);
|
|
||||||
int32_t et131x_mii_write(struct et131x_adapter *adapter,
|
|
||||||
u8 reg, u16 value);
|
|
||||||
void et131x_rx_dma_memory_free(struct et131x_adapter *adapter);
|
|
||||||
void et131x_rx_dma_disable(struct et131x_adapter *adapter);
|
void et131x_rx_dma_disable(struct et131x_adapter *adapter);
|
||||||
void et131x_rx_dma_enable(struct et131x_adapter *adapter);
|
void et131x_rx_dma_enable(struct et131x_adapter *adapter);
|
||||||
void et131x_init_send(struct et131x_adapter *adapter);
|
void et131x_init_send(struct et131x_adapter *adapter);
|
||||||
|
|
@ -1019,6 +1010,21 @@ void et1310_config_mac_regs2(struct et131x_adapter *adapter)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* et1310_in_phy_coma - check if the device is in phy coma
|
||||||
|
* @adapter: pointer to our adapter structure
|
||||||
|
*
|
||||||
|
* Returns 0 if the device is not in phy coma, 1 if it is in phy coma
|
||||||
|
*/
|
||||||
|
int et1310_in_phy_coma(struct et131x_adapter *adapter)
|
||||||
|
{
|
||||||
|
u32 pmcsr;
|
||||||
|
|
||||||
|
pmcsr = readl(&adapter->regs->global.pm_csr);
|
||||||
|
|
||||||
|
return ET_PM_PHY_SW_COMA & pmcsr ? 1 : 0;
|
||||||
|
}
|
||||||
|
|
||||||
void et1310_setup_device_for_multicast(struct et131x_adapter *adapter)
|
void et1310_setup_device_for_multicast(struct et131x_adapter *adapter)
|
||||||
{
|
{
|
||||||
struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
|
struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
|
||||||
|
|
@ -1318,6 +1324,184 @@ void et1310_config_macstat_regs(struct et131x_adapter *adapter)
|
||||||
writel(0xFFFE7E8B, &macstat->carry_reg2_mask);
|
writel(0xFFFE7E8B, &macstat->carry_reg2_mask);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC
|
||||||
|
* @adapter: pointer to our private adapter structure
|
||||||
|
* @addr: the address of the transceiver
|
||||||
|
* @reg: the register to read
|
||||||
|
* @value: pointer to a 16-bit value in which the value will be stored
|
||||||
|
*
|
||||||
|
* Returns 0 on success, errno on failure (as defined in errno.h)
|
||||||
|
*/
|
||||||
|
int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr,
|
||||||
|
u8 reg, u16 *value)
|
||||||
|
{
|
||||||
|
struct mac_regs __iomem *mac = &adapter->regs->mac;
|
||||||
|
int status = 0;
|
||||||
|
u32 delay = 0;
|
||||||
|
u32 mii_addr;
|
||||||
|
u32 mii_cmd;
|
||||||
|
u32 mii_indicator;
|
||||||
|
|
||||||
|
/* Save a local copy of the registers we are dealing with so we can
|
||||||
|
* set them back
|
||||||
|
*/
|
||||||
|
mii_addr = readl(&mac->mii_mgmt_addr);
|
||||||
|
mii_cmd = readl(&mac->mii_mgmt_cmd);
|
||||||
|
|
||||||
|
/* Stop the current operation */
|
||||||
|
writel(0, &mac->mii_mgmt_cmd);
|
||||||
|
|
||||||
|
/* Set up the register we need to read from on the correct PHY */
|
||||||
|
writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr);
|
||||||
|
|
||||||
|
writel(0x1, &mac->mii_mgmt_cmd);
|
||||||
|
|
||||||
|
do {
|
||||||
|
udelay(50);
|
||||||
|
delay++;
|
||||||
|
mii_indicator = readl(&mac->mii_mgmt_indicator);
|
||||||
|
} while ((mii_indicator & MGMT_WAIT) && delay < 50);
|
||||||
|
|
||||||
|
/* If we hit the max delay, we could not read the register */
|
||||||
|
if (delay == 50) {
|
||||||
|
dev_warn(&adapter->pdev->dev,
|
||||||
|
"reg 0x%08x could not be read\n", reg);
|
||||||
|
dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
|
||||||
|
mii_indicator);
|
||||||
|
|
||||||
|
status = -EIO;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* If we hit here we were able to read the register and we need to
|
||||||
|
* return the value to the caller */
|
||||||
|
*value = readl(&mac->mii_mgmt_stat) & 0xFFFF;
|
||||||
|
|
||||||
|
/* Stop the read operation */
|
||||||
|
writel(0, &mac->mii_mgmt_cmd);
|
||||||
|
|
||||||
|
/* set the registers we touched back to the state at which we entered
|
||||||
|
* this function
|
||||||
|
*/
|
||||||
|
writel(mii_addr, &mac->mii_mgmt_addr);
|
||||||
|
writel(mii_cmd, &mac->mii_mgmt_cmd);
|
||||||
|
|
||||||
|
return status;
|
||||||
|
}
|
||||||
|
|
||||||
|
int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value)
|
||||||
|
{
|
||||||
|
struct phy_device *phydev = adapter->phydev;
|
||||||
|
|
||||||
|
if (!phydev)
|
||||||
|
return -EIO;
|
||||||
|
|
||||||
|
return et131x_phy_mii_read(adapter, phydev->addr, reg, value);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* et131x_mii_write - Write to a PHY register through the MII interface of the MAC
|
||||||
|
* @adapter: pointer to our private adapter structure
|
||||||
|
* @reg: the register to read
|
||||||
|
* @value: 16-bit value to write
|
||||||
|
*
|
||||||
|
* FIXME: one caller in netdev still
|
||||||
|
*
|
||||||
|
* Return 0 on success, errno on failure (as defined in errno.h)
|
||||||
|
*/
|
||||||
|
int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value)
|
||||||
|
{
|
||||||
|
struct mac_regs __iomem *mac = &adapter->regs->mac;
|
||||||
|
struct phy_device *phydev = adapter->phydev;
|
||||||
|
int status = 0;
|
||||||
|
u8 addr;
|
||||||
|
u32 delay = 0;
|
||||||
|
u32 mii_addr;
|
||||||
|
u32 mii_cmd;
|
||||||
|
u32 mii_indicator;
|
||||||
|
|
||||||
|
if (!phydev)
|
||||||
|
return -EIO;
|
||||||
|
|
||||||
|
addr = phydev->addr;
|
||||||
|
|
||||||
|
/* Save a local copy of the registers we are dealing with so we can
|
||||||
|
* set them back
|
||||||
|
*/
|
||||||
|
mii_addr = readl(&mac->mii_mgmt_addr);
|
||||||
|
mii_cmd = readl(&mac->mii_mgmt_cmd);
|
||||||
|
|
||||||
|
/* Stop the current operation */
|
||||||
|
writel(0, &mac->mii_mgmt_cmd);
|
||||||
|
|
||||||
|
/* Set up the register we need to write to on the correct PHY */
|
||||||
|
writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr);
|
||||||
|
|
||||||
|
/* Add the value to write to the registers to the mac */
|
||||||
|
writel(value, &mac->mii_mgmt_ctrl);
|
||||||
|
|
||||||
|
do {
|
||||||
|
udelay(50);
|
||||||
|
delay++;
|
||||||
|
mii_indicator = readl(&mac->mii_mgmt_indicator);
|
||||||
|
} while ((mii_indicator & MGMT_BUSY) && delay < 100);
|
||||||
|
|
||||||
|
/* If we hit the max delay, we could not write the register */
|
||||||
|
if (delay == 100) {
|
||||||
|
u16 tmp;
|
||||||
|
|
||||||
|
dev_warn(&adapter->pdev->dev,
|
||||||
|
"reg 0x%08x could not be written", reg);
|
||||||
|
dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
|
||||||
|
mii_indicator);
|
||||||
|
dev_warn(&adapter->pdev->dev, "command is 0x%08x\n",
|
||||||
|
readl(&mac->mii_mgmt_cmd));
|
||||||
|
|
||||||
|
et131x_mii_read(adapter, reg, &tmp);
|
||||||
|
|
||||||
|
status = -EIO;
|
||||||
|
}
|
||||||
|
/* Stop the write operation */
|
||||||
|
writel(0, &mac->mii_mgmt_cmd);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* set the registers we touched back to the state at which we entered
|
||||||
|
* this function
|
||||||
|
*/
|
||||||
|
writel(mii_addr, &mac->mii_mgmt_addr);
|
||||||
|
writel(mii_cmd, &mac->mii_mgmt_cmd);
|
||||||
|
|
||||||
|
return status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Still used from _mac for BIT_READ */
|
||||||
|
void et1310_phy_access_mii_bit(struct et131x_adapter *adapter, u16 action,
|
||||||
|
u16 regnum, u16 bitnum, u8 *value)
|
||||||
|
{
|
||||||
|
u16 reg;
|
||||||
|
u16 mask = 0x0001 << bitnum;
|
||||||
|
|
||||||
|
/* Read the requested register */
|
||||||
|
et131x_mii_read(adapter, regnum, ®);
|
||||||
|
|
||||||
|
switch (action) {
|
||||||
|
case TRUEPHY_BIT_READ:
|
||||||
|
*value = (reg & mask) >> bitnum;
|
||||||
|
break;
|
||||||
|
|
||||||
|
case TRUEPHY_BIT_SET:
|
||||||
|
et131x_mii_write(adapter, regnum, reg | mask);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case TRUEPHY_BIT_CLEAR:
|
||||||
|
et131x_mii_write(adapter, regnum, reg & ~mask);
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
void et1310_config_flow_control(struct et131x_adapter *adapter)
|
void et1310_config_flow_control(struct et131x_adapter *adapter)
|
||||||
{
|
{
|
||||||
struct phy_device *phydev = adapter->phydev;
|
struct phy_device *phydev = adapter->phydev;
|
||||||
|
|
@ -1476,156 +1660,6 @@ int et131x_mdio_reset(struct mii_bus *bus)
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value)
|
|
||||||
{
|
|
||||||
struct phy_device *phydev = adapter->phydev;
|
|
||||||
|
|
||||||
if (!phydev)
|
|
||||||
return -EIO;
|
|
||||||
|
|
||||||
return et131x_phy_mii_read(adapter, phydev->addr, reg, value);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC
|
|
||||||
* @adapter: pointer to our private adapter structure
|
|
||||||
* @addr: the address of the transceiver
|
|
||||||
* @reg: the register to read
|
|
||||||
* @value: pointer to a 16-bit value in which the value will be stored
|
|
||||||
*
|
|
||||||
* Returns 0 on success, errno on failure (as defined in errno.h)
|
|
||||||
*/
|
|
||||||
int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr,
|
|
||||||
u8 reg, u16 *value)
|
|
||||||
{
|
|
||||||
struct mac_regs __iomem *mac = &adapter->regs->mac;
|
|
||||||
int status = 0;
|
|
||||||
u32 delay = 0;
|
|
||||||
u32 mii_addr;
|
|
||||||
u32 mii_cmd;
|
|
||||||
u32 mii_indicator;
|
|
||||||
|
|
||||||
/* Save a local copy of the registers we are dealing with so we can
|
|
||||||
* set them back
|
|
||||||
*/
|
|
||||||
mii_addr = readl(&mac->mii_mgmt_addr);
|
|
||||||
mii_cmd = readl(&mac->mii_mgmt_cmd);
|
|
||||||
|
|
||||||
/* Stop the current operation */
|
|
||||||
writel(0, &mac->mii_mgmt_cmd);
|
|
||||||
|
|
||||||
/* Set up the register we need to read from on the correct PHY */
|
|
||||||
writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr);
|
|
||||||
|
|
||||||
writel(0x1, &mac->mii_mgmt_cmd);
|
|
||||||
|
|
||||||
do {
|
|
||||||
udelay(50);
|
|
||||||
delay++;
|
|
||||||
mii_indicator = readl(&mac->mii_mgmt_indicator);
|
|
||||||
} while ((mii_indicator & MGMT_WAIT) && delay < 50);
|
|
||||||
|
|
||||||
/* If we hit the max delay, we could not read the register */
|
|
||||||
if (delay == 50) {
|
|
||||||
dev_warn(&adapter->pdev->dev,
|
|
||||||
"reg 0x%08x could not be read\n", reg);
|
|
||||||
dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
|
|
||||||
mii_indicator);
|
|
||||||
|
|
||||||
status = -EIO;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* If we hit here we were able to read the register and we need to
|
|
||||||
* return the value to the caller */
|
|
||||||
*value = readl(&mac->mii_mgmt_stat) & 0xFFFF;
|
|
||||||
|
|
||||||
/* Stop the read operation */
|
|
||||||
writel(0, &mac->mii_mgmt_cmd);
|
|
||||||
|
|
||||||
/* set the registers we touched back to the state at which we entered
|
|
||||||
* this function
|
|
||||||
*/
|
|
||||||
writel(mii_addr, &mac->mii_mgmt_addr);
|
|
||||||
writel(mii_cmd, &mac->mii_mgmt_cmd);
|
|
||||||
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* et131x_mii_write - Write to a PHY register through the MII interface of the MAC
|
|
||||||
* @adapter: pointer to our private adapter structure
|
|
||||||
* @reg: the register to read
|
|
||||||
* @value: 16-bit value to write
|
|
||||||
*
|
|
||||||
* FIXME: one caller in netdev still
|
|
||||||
*
|
|
||||||
* Return 0 on success, errno on failure (as defined in errno.h)
|
|
||||||
*/
|
|
||||||
int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value)
|
|
||||||
{
|
|
||||||
struct mac_regs __iomem *mac = &adapter->regs->mac;
|
|
||||||
struct phy_device *phydev = adapter->phydev;
|
|
||||||
int status = 0;
|
|
||||||
u8 addr;
|
|
||||||
u32 delay = 0;
|
|
||||||
u32 mii_addr;
|
|
||||||
u32 mii_cmd;
|
|
||||||
u32 mii_indicator;
|
|
||||||
|
|
||||||
if (!phydev)
|
|
||||||
return -EIO;
|
|
||||||
|
|
||||||
addr = phydev->addr;
|
|
||||||
|
|
||||||
/* Save a local copy of the registers we are dealing with so we can
|
|
||||||
* set them back
|
|
||||||
*/
|
|
||||||
mii_addr = readl(&mac->mii_mgmt_addr);
|
|
||||||
mii_cmd = readl(&mac->mii_mgmt_cmd);
|
|
||||||
|
|
||||||
/* Stop the current operation */
|
|
||||||
writel(0, &mac->mii_mgmt_cmd);
|
|
||||||
|
|
||||||
/* Set up the register we need to write to on the correct PHY */
|
|
||||||
writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr);
|
|
||||||
|
|
||||||
/* Add the value to write to the registers to the mac */
|
|
||||||
writel(value, &mac->mii_mgmt_ctrl);
|
|
||||||
|
|
||||||
do {
|
|
||||||
udelay(50);
|
|
||||||
delay++;
|
|
||||||
mii_indicator = readl(&mac->mii_mgmt_indicator);
|
|
||||||
} while ((mii_indicator & MGMT_BUSY) && delay < 100);
|
|
||||||
|
|
||||||
/* If we hit the max delay, we could not write the register */
|
|
||||||
if (delay == 100) {
|
|
||||||
u16 tmp;
|
|
||||||
|
|
||||||
dev_warn(&adapter->pdev->dev,
|
|
||||||
"reg 0x%08x could not be written", reg);
|
|
||||||
dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
|
|
||||||
mii_indicator);
|
|
||||||
dev_warn(&adapter->pdev->dev, "command is 0x%08x\n",
|
|
||||||
readl(&mac->mii_mgmt_cmd));
|
|
||||||
|
|
||||||
et131x_mii_read(adapter, reg, &tmp);
|
|
||||||
|
|
||||||
status = -EIO;
|
|
||||||
}
|
|
||||||
/* Stop the write operation */
|
|
||||||
writel(0, &mac->mii_mgmt_cmd);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* set the registers we touched back to the state at which we entered
|
|
||||||
* this function
|
|
||||||
*/
|
|
||||||
writel(mii_addr, &mac->mii_mgmt_addr);
|
|
||||||
writel(mii_cmd, &mac->mii_mgmt_cmd);
|
|
||||||
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* et1310_phy_power_down - PHY power control
|
* et1310_phy_power_down - PHY power control
|
||||||
* @adapter: device to control
|
* @adapter: device to control
|
||||||
|
|
@ -1647,34 +1681,6 @@ void et1310_phy_power_down(struct et131x_adapter *adapter, bool down)
|
||||||
et131x_mii_write(adapter, MII_BMCR, data);
|
et131x_mii_write(adapter, MII_BMCR, data);
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Still used from _mac for BIT_READ */
|
|
||||||
void et1310_phy_access_mii_bit(struct et131x_adapter *adapter, u16 action,
|
|
||||||
u16 regnum, u16 bitnum, u8 *value)
|
|
||||||
{
|
|
||||||
u16 reg;
|
|
||||||
u16 mask = 0x0001 << bitnum;
|
|
||||||
|
|
||||||
/* Read the requested register */
|
|
||||||
et131x_mii_read(adapter, regnum, ®);
|
|
||||||
|
|
||||||
switch (action) {
|
|
||||||
case TRUEPHY_BIT_READ:
|
|
||||||
*value = (reg & mask) >> bitnum;
|
|
||||||
break;
|
|
||||||
|
|
||||||
case TRUEPHY_BIT_SET:
|
|
||||||
et131x_mii_write(adapter, regnum, reg | mask);
|
|
||||||
break;
|
|
||||||
|
|
||||||
case TRUEPHY_BIT_CLEAR:
|
|
||||||
et131x_mii_write(adapter, regnum, reg & ~mask);
|
|
||||||
break;
|
|
||||||
|
|
||||||
default:
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* et131x_xcvr_init - Init the phy if we are setting it into force mode
|
* et131x_xcvr_init - Init the phy if we are setting it into force mode
|
||||||
* @adapter: pointer to our private adapter structure
|
* @adapter: pointer to our private adapter structure
|
||||||
|
|
@ -1770,21 +1776,6 @@ void et131x_configure_global_regs(struct et131x_adapter *adapter)
|
||||||
|
|
||||||
/* PM functions */
|
/* PM functions */
|
||||||
|
|
||||||
/**
|
|
||||||
* et1310_in_phy_coma - check if the device is in phy coma
|
|
||||||
* @adapter: pointer to our adapter structure
|
|
||||||
*
|
|
||||||
* Returns 0 if the device is not in phy coma, 1 if it is in phy coma
|
|
||||||
*/
|
|
||||||
int et1310_in_phy_coma(struct et131x_adapter *adapter)
|
|
||||||
{
|
|
||||||
u32 pmcsr;
|
|
||||||
|
|
||||||
pmcsr = readl(&adapter->regs->global.pm_csr);
|
|
||||||
|
|
||||||
return ET_PM_PHY_SW_COMA & pmcsr ? 1 : 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* et131x_config_rx_dma_regs - Start of Rx_DMA init sequence
|
* et131x_config_rx_dma_regs - Start of Rx_DMA init sequence
|
||||||
* @adapter: pointer to our adapter structure
|
* @adapter: pointer to our adapter structure
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue