mirror of https://gitee.com/openkylin/linux.git
ARMv7 Vexpress updates/cleanups for v4.18
1. Syntactic restructuring of motherboard include file so that it can be
included at the top of any other DTS file as it should be rather than
existing include in the middle of the file at a specific location
2. Use of standard GPIO controller bindings for few sysreg components
like LED, MMC Write Protect/Card Detect and Flash Write Protect
to fix some of the new DTC warnings
3. Cleanup to replace all underscores('_') with hyphens('-') in the
device node names
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=X3Vc
-----END PGP SIGNATURE-----
Merge tag 'vexpress-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
ARMv7 Vexpress updates/cleanups for v4.18
1. Syntactic restructuring of motherboard include file so that it can be
included at the top of any other DTS file as it should be rather than
existing include in the middle of the file at a specific location
2. Use of standard GPIO controller bindings for few sysreg components
like LED, MMC Write Protect/Card Detect and Flash Write Protect
to fix some of the new DTC warnings
3. Cleanup to replace all underscores('_') with hyphens('-') in the
device node names
* tag 'vexpress-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress: replace '_' with '-' in node names
ARM: dts: vexpress: use standard gpio bindings for sys_{led,mci,flash}
ARM: dts: vexpress: Restructure motherboard includes
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
23fe7cb6d8
|
|
@ -17,426 +17,436 @@
|
|||
* CHANGES TO vexpress-v2m.dtsi!
|
||||
*/
|
||||
|
||||
motherboard {
|
||||
model = "V2M-P1";
|
||||
arm,hbi = <0x190>;
|
||||
arm,vexpress,site = <0>;
|
||||
arm,v2m-memory-map = "rs1";
|
||||
compatible = "arm,vexpress,v2m-p1", "simple-bus";
|
||||
#address-cells = <2>; /* SMB chipselect number and offset */
|
||||
#size-cells = <1>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges;
|
||||
|
||||
flash@0,00000000 {
|
||||
compatible = "arm,vexpress-flash", "cfi-flash";
|
||||
reg = <0 0x00000000 0x04000000>,
|
||||
<4 0x00000000 0x04000000>;
|
||||
bank-width = <4>;
|
||||
};
|
||||
|
||||
psram@1,00000000 {
|
||||
compatible = "arm,vexpress-psram", "mtd-ram";
|
||||
reg = <1 0x00000000 0x02000000>;
|
||||
bank-width = <4>;
|
||||
};
|
||||
|
||||
v2m_video_ram: vram@2,00000000 {
|
||||
compatible = "arm,vexpress-vram";
|
||||
reg = <2 0x00000000 0x00800000>;
|
||||
};
|
||||
|
||||
ethernet@2,02000000 {
|
||||
compatible = "smsc,lan9118", "smsc,lan9115";
|
||||
reg = <2 0x02000000 0x10000>;
|
||||
interrupts = <15>;
|
||||
phy-mode = "mii";
|
||||
reg-io-width = <4>;
|
||||
smsc,irq-active-high;
|
||||
smsc,irq-push-pull;
|
||||
vdd33a-supply = <&v2m_fixed_3v3>;
|
||||
vddvario-supply = <&v2m_fixed_3v3>;
|
||||
};
|
||||
|
||||
usb@2,03000000 {
|
||||
compatible = "nxp,usb-isp1761";
|
||||
reg = <2 0x03000000 0x20000>;
|
||||
interrupts = <16>;
|
||||
port1-otg;
|
||||
};
|
||||
|
||||
iofpga@3,00000000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
/ {
|
||||
smb@8000000 {
|
||||
motherboard {
|
||||
model = "V2M-P1";
|
||||
arm,hbi = <0x190>;
|
||||
arm,vexpress,site = <0>;
|
||||
arm,v2m-memory-map = "rs1";
|
||||
compatible = "arm,vexpress,v2m-p1", "simple-bus";
|
||||
#address-cells = <2>; /* SMB chipselect number and offset */
|
||||
#size-cells = <1>;
|
||||
ranges = <0 3 0 0x200000>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges;
|
||||
|
||||
v2m_sysreg: sysreg@10000 {
|
||||
compatible = "arm,vexpress-sysreg";
|
||||
reg = <0x010000 0x1000>;
|
||||
|
||||
v2m_led_gpios: sys_led {
|
||||
compatible = "arm,vexpress-sysreg,sys_led";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
v2m_mmc_gpios: sys_mci {
|
||||
compatible = "arm,vexpress-sysreg,sys_mci";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
v2m_flash_gpios: sys_flash {
|
||||
compatible = "arm,vexpress-sysreg,sys_flash";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
flash@0,00000000 {
|
||||
compatible = "arm,vexpress-flash", "cfi-flash";
|
||||
reg = <0 0x00000000 0x04000000>,
|
||||
<4 0x00000000 0x04000000>;
|
||||
bank-width = <4>;
|
||||
};
|
||||
|
||||
v2m_sysctl: sysctl@20000 {
|
||||
compatible = "arm,sp810", "arm,primecell";
|
||||
reg = <0x020000 0x1000>;
|
||||
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
|
||||
clock-names = "refclk", "timclk", "apb_pclk";
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
|
||||
assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
|
||||
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
|
||||
psram@1,00000000 {
|
||||
compatible = "arm,vexpress-psram", "mtd-ram";
|
||||
reg = <1 0x00000000 0x02000000>;
|
||||
bank-width = <4>;
|
||||
};
|
||||
|
||||
/* PCI-E I2C bus */
|
||||
v2m_i2c_pcie: i2c@30000 {
|
||||
compatible = "arm,versatile-i2c";
|
||||
reg = <0x030000 0x1000>;
|
||||
v2m_video_ram: vram@2,00000000 {
|
||||
compatible = "arm,vexpress-vram";
|
||||
reg = <2 0x00000000 0x00800000>;
|
||||
};
|
||||
|
||||
ethernet@2,02000000 {
|
||||
compatible = "smsc,lan9118", "smsc,lan9115";
|
||||
reg = <2 0x02000000 0x10000>;
|
||||
interrupts = <15>;
|
||||
phy-mode = "mii";
|
||||
reg-io-width = <4>;
|
||||
smsc,irq-active-high;
|
||||
smsc,irq-push-pull;
|
||||
vdd33a-supply = <&v2m_fixed_3v3>;
|
||||
vddvario-supply = <&v2m_fixed_3v3>;
|
||||
};
|
||||
|
||||
usb@2,03000000 {
|
||||
compatible = "nxp,usb-isp1761";
|
||||
reg = <2 0x03000000 0x20000>;
|
||||
interrupts = <16>;
|
||||
port1-otg;
|
||||
};
|
||||
|
||||
iofpga@3,00000000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 3 0 0x200000>;
|
||||
|
||||
pcie-switch@60 {
|
||||
compatible = "idt,89hpes32h8";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
v2m_sysreg: sysreg@10000 {
|
||||
compatible = "arm,vexpress-sysreg";
|
||||
reg = <0x010000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x10000 0x1000>;
|
||||
|
||||
aaci@40000 {
|
||||
compatible = "arm,pl041", "arm,primecell";
|
||||
reg = <0x040000 0x1000>;
|
||||
interrupts = <11>;
|
||||
clocks = <&smbclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
v2m_led_gpios: gpio@8 {
|
||||
compatible = "arm,vexpress-sysreg,sys_led";
|
||||
reg = <0x008 4>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
mmci@50000 {
|
||||
compatible = "arm,pl180", "arm,primecell";
|
||||
reg = <0x050000 0x1000>;
|
||||
interrupts = <9 10>;
|
||||
cd-gpios = <&v2m_mmc_gpios 0 0>;
|
||||
wp-gpios = <&v2m_mmc_gpios 1 0>;
|
||||
max-frequency = <12000000>;
|
||||
vmmc-supply = <&v2m_fixed_3v3>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "mclk", "apb_pclk";
|
||||
};
|
||||
v2m_mmc_gpios: gpio@48 {
|
||||
compatible = "arm,vexpress-sysreg,sys_mci";
|
||||
reg = <0x048 4>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
kmi@60000 {
|
||||
compatible = "arm,pl050", "arm,primecell";
|
||||
reg = <0x060000 0x1000>;
|
||||
interrupts = <12>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "KMIREFCLK", "apb_pclk";
|
||||
};
|
||||
|
||||
kmi@70000 {
|
||||
compatible = "arm,pl050", "arm,primecell";
|
||||
reg = <0x070000 0x1000>;
|
||||
interrupts = <13>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "KMIREFCLK", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial0: uart@90000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x090000 0x1000>;
|
||||
interrupts = <5>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial1: uart@a0000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0a0000 0x1000>;
|
||||
interrupts = <6>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial2: uart@b0000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0b0000 0x1000>;
|
||||
interrupts = <7>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial3: uart@c0000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0c0000 0x1000>;
|
||||
interrupts = <8>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
wdt@f0000 {
|
||||
compatible = "arm,sp805", "arm,primecell";
|
||||
reg = <0x0f0000 0x1000>;
|
||||
interrupts = <0>;
|
||||
clocks = <&v2m_refclk32khz>, <&smbclk>;
|
||||
clock-names = "wdogclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_timer01: timer@110000 {
|
||||
compatible = "arm,sp804", "arm,primecell";
|
||||
reg = <0x110000 0x1000>;
|
||||
interrupts = <2>;
|
||||
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
|
||||
clock-names = "timclken1", "timclken2", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_timer23: timer@120000 {
|
||||
compatible = "arm,sp804", "arm,primecell";
|
||||
reg = <0x120000 0x1000>;
|
||||
interrupts = <3>;
|
||||
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
|
||||
clock-names = "timclken1", "timclken2", "apb_pclk";
|
||||
};
|
||||
|
||||
/* DVI I2C bus */
|
||||
v2m_i2c_dvi: i2c@160000 {
|
||||
compatible = "arm,versatile-i2c";
|
||||
reg = <0x160000 0x1000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dvi-transmitter@39 {
|
||||
compatible = "sil,sii9022-tpi", "sil,sii9022";
|
||||
reg = <0x39>;
|
||||
};
|
||||
|
||||
dvi-transmitter@60 {
|
||||
compatible = "sil,sii9022-cpi", "sil,sii9022";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@170000 {
|
||||
compatible = "arm,pl031", "arm,primecell";
|
||||
reg = <0x170000 0x1000>;
|
||||
interrupts = <4>;
|
||||
clocks = <&smbclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
compact-flash@1a0000 {
|
||||
compatible = "arm,vexpress-cf", "ata-generic";
|
||||
reg = <0x1a0000 0x100
|
||||
0x1a0100 0xf00>;
|
||||
reg-shift = <2>;
|
||||
};
|
||||
|
||||
clcd@1f0000 {
|
||||
compatible = "arm,pl111", "arm,primecell";
|
||||
reg = <0x1f0000 0x1000>;
|
||||
interrupt-names = "combined";
|
||||
interrupts = <14>;
|
||||
clocks = <&v2m_oscclk1>, <&smbclk>;
|
||||
clock-names = "clcdclk", "apb_pclk";
|
||||
memory-region = <&v2m_video_ram>;
|
||||
max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
|
||||
|
||||
port {
|
||||
v2m_clcd_pads: endpoint {
|
||||
remote-endpoint = <&v2m_clcd_panel>;
|
||||
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
||||
v2m_flash_gpios: gpio@4c {
|
||||
compatible = "arm,vexpress-sysreg,sys_flash";
|
||||
reg = <0x04c 4>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "panel-dpi";
|
||||
v2m_sysctl: sysctl@20000 {
|
||||
compatible = "arm,sp810", "arm,primecell";
|
||||
reg = <0x020000 0x1000>;
|
||||
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
|
||||
clock-names = "refclk", "timclk", "apb_pclk";
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
|
||||
assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
|
||||
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
|
||||
};
|
||||
|
||||
/* PCI-E I2C bus */
|
||||
v2m_i2c_pcie: i2c@30000 {
|
||||
compatible = "arm,versatile-i2c";
|
||||
reg = <0x030000 0x1000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pcie-switch@60 {
|
||||
compatible = "idt,89hpes32h8";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
aaci@40000 {
|
||||
compatible = "arm,pl041", "arm,primecell";
|
||||
reg = <0x040000 0x1000>;
|
||||
interrupts = <11>;
|
||||
clocks = <&smbclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
mmci@50000 {
|
||||
compatible = "arm,pl180", "arm,primecell";
|
||||
reg = <0x050000 0x1000>;
|
||||
interrupts = <9 10>;
|
||||
cd-gpios = <&v2m_mmc_gpios 0 0>;
|
||||
wp-gpios = <&v2m_mmc_gpios 1 0>;
|
||||
max-frequency = <12000000>;
|
||||
vmmc-supply = <&v2m_fixed_3v3>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "mclk", "apb_pclk";
|
||||
};
|
||||
|
||||
kmi@60000 {
|
||||
compatible = "arm,pl050", "arm,primecell";
|
||||
reg = <0x060000 0x1000>;
|
||||
interrupts = <12>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "KMIREFCLK", "apb_pclk";
|
||||
};
|
||||
|
||||
kmi@70000 {
|
||||
compatible = "arm,pl050", "arm,primecell";
|
||||
reg = <0x070000 0x1000>;
|
||||
interrupts = <13>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "KMIREFCLK", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial0: uart@90000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x090000 0x1000>;
|
||||
interrupts = <5>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial1: uart@a0000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0a0000 0x1000>;
|
||||
interrupts = <6>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial2: uart@b0000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0b0000 0x1000>;
|
||||
interrupts = <7>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial3: uart@c0000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0c0000 0x1000>;
|
||||
interrupts = <8>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
wdt@f0000 {
|
||||
compatible = "arm,sp805", "arm,primecell";
|
||||
reg = <0x0f0000 0x1000>;
|
||||
interrupts = <0>;
|
||||
clocks = <&v2m_refclk32khz>, <&smbclk>;
|
||||
clock-names = "wdogclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_timer01: timer@110000 {
|
||||
compatible = "arm,sp804", "arm,primecell";
|
||||
reg = <0x110000 0x1000>;
|
||||
interrupts = <2>;
|
||||
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
|
||||
clock-names = "timclken1", "timclken2", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_timer23: timer@120000 {
|
||||
compatible = "arm,sp804", "arm,primecell";
|
||||
reg = <0x120000 0x1000>;
|
||||
interrupts = <3>;
|
||||
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
|
||||
clock-names = "timclken1", "timclken2", "apb_pclk";
|
||||
};
|
||||
|
||||
/* DVI I2C bus */
|
||||
v2m_i2c_dvi: i2c@160000 {
|
||||
compatible = "arm,versatile-i2c";
|
||||
reg = <0x160000 0x1000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dvi-transmitter@39 {
|
||||
compatible = "sil,sii9022-tpi", "sil,sii9022";
|
||||
reg = <0x39>;
|
||||
};
|
||||
|
||||
dvi-transmitter@60 {
|
||||
compatible = "sil,sii9022-cpi", "sil,sii9022";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@170000 {
|
||||
compatible = "arm,pl031", "arm,primecell";
|
||||
reg = <0x170000 0x1000>;
|
||||
interrupts = <4>;
|
||||
clocks = <&smbclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
compact-flash@1a0000 {
|
||||
compatible = "arm,vexpress-cf", "ata-generic";
|
||||
reg = <0x1a0000 0x100
|
||||
0x1a0100 0xf00>;
|
||||
reg-shift = <2>;
|
||||
};
|
||||
|
||||
clcd@1f0000 {
|
||||
compatible = "arm,pl111", "arm,primecell";
|
||||
reg = <0x1f0000 0x1000>;
|
||||
interrupt-names = "combined";
|
||||
interrupts = <14>;
|
||||
clocks = <&v2m_oscclk1>, <&smbclk>;
|
||||
clock-names = "clcdclk", "apb_pclk";
|
||||
memory-region = <&v2m_video_ram>;
|
||||
max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
|
||||
|
||||
port {
|
||||
v2m_clcd_panel: endpoint {
|
||||
remote-endpoint = <&v2m_clcd_pads>;
|
||||
v2m_clcd_pads: endpoint {
|
||||
remote-endpoint = <&v2m_clcd_panel>;
|
||||
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
||||
};
|
||||
};
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <25175000>;
|
||||
hactive = <640>;
|
||||
hback-porch = <40>;
|
||||
hfront-porch = <24>;
|
||||
hsync-len = <96>;
|
||||
vactive = <480>;
|
||||
vback-porch = <32>;
|
||||
vfront-porch = <11>;
|
||||
vsync-len = <2>;
|
||||
panel {
|
||||
compatible = "panel-dpi";
|
||||
|
||||
port {
|
||||
v2m_clcd_panel: endpoint {
|
||||
remote-endpoint = <&v2m_clcd_pads>;
|
||||
};
|
||||
};
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <25175000>;
|
||||
hactive = <640>;
|
||||
hback-porch = <40>;
|
||||
hfront-porch = <24>;
|
||||
hsync-len = <96>;
|
||||
vactive = <480>;
|
||||
vback-porch = <32>;
|
||||
vfront-porch = <11>;
|
||||
vsync-len = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
v2m_fixed_3v3: fixed-regulator-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
v2m_clk24mhz: clk24mhz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "v2m:clk24mhz";
|
||||
};
|
||||
|
||||
v2m_refclk1mhz: refclk1mhz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <1000000>;
|
||||
clock-output-names = "v2m:refclk1mhz";
|
||||
};
|
||||
|
||||
v2m_refclk32khz: refclk32khz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "v2m:refclk32khz";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
user1 {
|
||||
label = "v2m:green:user1";
|
||||
gpios = <&v2m_led_gpios 0 0>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
user2 {
|
||||
label = "v2m:green:user2";
|
||||
gpios = <&v2m_led_gpios 1 0>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
|
||||
user3 {
|
||||
label = "v2m:green:user3";
|
||||
gpios = <&v2m_led_gpios 2 0>;
|
||||
linux,default-trigger = "cpu0";
|
||||
};
|
||||
|
||||
user4 {
|
||||
label = "v2m:green:user4";
|
||||
gpios = <&v2m_led_gpios 3 0>;
|
||||
linux,default-trigger = "cpu1";
|
||||
};
|
||||
|
||||
user5 {
|
||||
label = "v2m:green:user5";
|
||||
gpios = <&v2m_led_gpios 4 0>;
|
||||
linux,default-trigger = "cpu2";
|
||||
};
|
||||
|
||||
user6 {
|
||||
label = "v2m:green:user6";
|
||||
gpios = <&v2m_led_gpios 5 0>;
|
||||
linux,default-trigger = "cpu3";
|
||||
};
|
||||
|
||||
user7 {
|
||||
label = "v2m:green:user7";
|
||||
gpios = <&v2m_led_gpios 6 0>;
|
||||
linux,default-trigger = "cpu4";
|
||||
};
|
||||
|
||||
user8 {
|
||||
label = "v2m:green:user8";
|
||||
gpios = <&v2m_led_gpios 7 0>;
|
||||
linux,default-trigger = "cpu5";
|
||||
};
|
||||
};
|
||||
|
||||
mcc {
|
||||
compatible = "arm,vexpress,config-bus";
|
||||
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||||
|
||||
oscclk0 {
|
||||
/* MCC static memory clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 0>;
|
||||
freq-range = <25000000 60000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk0";
|
||||
};
|
||||
|
||||
v2m_oscclk1: oscclk1 {
|
||||
/* CLCD clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 1>;
|
||||
freq-range = <23750000 65000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk1";
|
||||
};
|
||||
|
||||
v2m_oscclk2: oscclk2 {
|
||||
/* IO FPGA peripheral clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 2>;
|
||||
freq-range = <24000000 24000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk2";
|
||||
};
|
||||
|
||||
volt-vio {
|
||||
/* Logic level voltage */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 0>;
|
||||
regulator-name = "VIO";
|
||||
v2m_fixed_3v3: fixed-regulator-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
label = "VIO";
|
||||
};
|
||||
|
||||
temp-mcc {
|
||||
/* MCC internal operating temperature */
|
||||
compatible = "arm,vexpress-temp";
|
||||
arm,vexpress-sysreg,func = <4 0>;
|
||||
label = "MCC";
|
||||
v2m_clk24mhz: clk24mhz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "v2m:clk24mhz";
|
||||
};
|
||||
|
||||
reset {
|
||||
compatible = "arm,vexpress-reset";
|
||||
arm,vexpress-sysreg,func = <5 0>;
|
||||
v2m_refclk1mhz: refclk1mhz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <1000000>;
|
||||
clock-output-names = "v2m:refclk1mhz";
|
||||
};
|
||||
|
||||
muxfpga {
|
||||
compatible = "arm,vexpress-muxfpga";
|
||||
arm,vexpress-sysreg,func = <7 0>;
|
||||
v2m_refclk32khz: refclk32khz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "v2m:refclk32khz";
|
||||
};
|
||||
|
||||
shutdown {
|
||||
compatible = "arm,vexpress-shutdown";
|
||||
arm,vexpress-sysreg,func = <8 0>;
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
user1 {
|
||||
label = "v2m:green:user1";
|
||||
gpios = <&v2m_led_gpios 0 0>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
user2 {
|
||||
label = "v2m:green:user2";
|
||||
gpios = <&v2m_led_gpios 1 0>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
|
||||
user3 {
|
||||
label = "v2m:green:user3";
|
||||
gpios = <&v2m_led_gpios 2 0>;
|
||||
linux,default-trigger = "cpu0";
|
||||
};
|
||||
|
||||
user4 {
|
||||
label = "v2m:green:user4";
|
||||
gpios = <&v2m_led_gpios 3 0>;
|
||||
linux,default-trigger = "cpu1";
|
||||
};
|
||||
|
||||
user5 {
|
||||
label = "v2m:green:user5";
|
||||
gpios = <&v2m_led_gpios 4 0>;
|
||||
linux,default-trigger = "cpu2";
|
||||
};
|
||||
|
||||
user6 {
|
||||
label = "v2m:green:user6";
|
||||
gpios = <&v2m_led_gpios 5 0>;
|
||||
linux,default-trigger = "cpu3";
|
||||
};
|
||||
|
||||
user7 {
|
||||
label = "v2m:green:user7";
|
||||
gpios = <&v2m_led_gpios 6 0>;
|
||||
linux,default-trigger = "cpu4";
|
||||
};
|
||||
|
||||
user8 {
|
||||
label = "v2m:green:user8";
|
||||
gpios = <&v2m_led_gpios 7 0>;
|
||||
linux,default-trigger = "cpu5";
|
||||
};
|
||||
};
|
||||
|
||||
reboot {
|
||||
compatible = "arm,vexpress-reboot";
|
||||
arm,vexpress-sysreg,func = <9 0>;
|
||||
};
|
||||
mcc {
|
||||
compatible = "arm,vexpress,config-bus";
|
||||
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||||
|
||||
dvimode {
|
||||
compatible = "arm,vexpress-dvimode";
|
||||
arm,vexpress-sysreg,func = <11 0>;
|
||||
oscclk0 {
|
||||
/* MCC static memory clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 0>;
|
||||
freq-range = <25000000 60000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk0";
|
||||
};
|
||||
|
||||
v2m_oscclk1: oscclk1 {
|
||||
/* CLCD clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 1>;
|
||||
freq-range = <23750000 65000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk1";
|
||||
};
|
||||
|
||||
v2m_oscclk2: oscclk2 {
|
||||
/* IO FPGA peripheral clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 2>;
|
||||
freq-range = <24000000 24000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk2";
|
||||
};
|
||||
|
||||
volt-vio {
|
||||
/* Logic level voltage */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 0>;
|
||||
regulator-name = "VIO";
|
||||
regulator-always-on;
|
||||
label = "VIO";
|
||||
};
|
||||
|
||||
temp-mcc {
|
||||
/* MCC internal operating temperature */
|
||||
compatible = "arm,vexpress-temp";
|
||||
arm,vexpress-sysreg,func = <4 0>;
|
||||
label = "MCC";
|
||||
};
|
||||
|
||||
reset {
|
||||
compatible = "arm,vexpress-reset";
|
||||
arm,vexpress-sysreg,func = <5 0>;
|
||||
};
|
||||
|
||||
muxfpga {
|
||||
compatible = "arm,vexpress-muxfpga";
|
||||
arm,vexpress-sysreg,func = <7 0>;
|
||||
};
|
||||
|
||||
shutdown {
|
||||
compatible = "arm,vexpress-shutdown";
|
||||
arm,vexpress-sysreg,func = <8 0>;
|
||||
};
|
||||
|
||||
reboot {
|
||||
compatible = "arm,vexpress-reboot";
|
||||
arm,vexpress-sysreg,func = <9 0>;
|
||||
};
|
||||
|
||||
dvimode {
|
||||
compatible = "arm,vexpress-dvimode";
|
||||
arm,vexpress-sysreg,func = <11 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -18,425 +18,435 @@
|
|||
* CHANGES TO vexpress-v2m-rs1.dtsi!
|
||||
*/
|
||||
|
||||
motherboard {
|
||||
model = "V2M-P1";
|
||||
arm,hbi = <0x190>;
|
||||
arm,vexpress,site = <0>;
|
||||
compatible = "arm,vexpress,v2m-p1", "simple-bus";
|
||||
#address-cells = <2>; /* SMB chipselect number and offset */
|
||||
#size-cells = <1>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges;
|
||||
|
||||
flash@0,00000000 {
|
||||
compatible = "arm,vexpress-flash", "cfi-flash";
|
||||
reg = <0 0x00000000 0x04000000>,
|
||||
<1 0x00000000 0x04000000>;
|
||||
bank-width = <4>;
|
||||
};
|
||||
|
||||
psram@2,00000000 {
|
||||
compatible = "arm,vexpress-psram", "mtd-ram";
|
||||
reg = <2 0x00000000 0x02000000>;
|
||||
bank-width = <4>;
|
||||
};
|
||||
|
||||
v2m_video_ram: vram@3,00000000 {
|
||||
compatible = "arm,vexpress-vram";
|
||||
reg = <3 0x00000000 0x00800000>;
|
||||
};
|
||||
|
||||
ethernet@3,02000000 {
|
||||
compatible = "smsc,lan9118", "smsc,lan9115";
|
||||
reg = <3 0x02000000 0x10000>;
|
||||
interrupts = <15>;
|
||||
phy-mode = "mii";
|
||||
reg-io-width = <4>;
|
||||
smsc,irq-active-high;
|
||||
smsc,irq-push-pull;
|
||||
vdd33a-supply = <&v2m_fixed_3v3>;
|
||||
vddvario-supply = <&v2m_fixed_3v3>;
|
||||
};
|
||||
|
||||
usb@3,03000000 {
|
||||
compatible = "nxp,usb-isp1761";
|
||||
reg = <3 0x03000000 0x20000>;
|
||||
interrupts = <16>;
|
||||
port1-otg;
|
||||
};
|
||||
|
||||
iofpga@7,00000000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
/ {
|
||||
smb@4000000 {
|
||||
motherboard {
|
||||
model = "V2M-P1";
|
||||
arm,hbi = <0x190>;
|
||||
arm,vexpress,site = <0>;
|
||||
compatible = "arm,vexpress,v2m-p1", "simple-bus";
|
||||
#address-cells = <2>; /* SMB chipselect number and offset */
|
||||
#size-cells = <1>;
|
||||
ranges = <0 7 0 0x20000>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges;
|
||||
|
||||
v2m_sysreg: sysreg@0 {
|
||||
compatible = "arm,vexpress-sysreg";
|
||||
reg = <0x00000 0x1000>;
|
||||
|
||||
v2m_led_gpios: sys_led {
|
||||
compatible = "arm,vexpress-sysreg,sys_led";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
v2m_mmc_gpios: sys_mci {
|
||||
compatible = "arm,vexpress-sysreg,sys_mci";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
v2m_flash_gpios: sys_flash {
|
||||
compatible = "arm,vexpress-sysreg,sys_flash";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
flash@0,00000000 {
|
||||
compatible = "arm,vexpress-flash", "cfi-flash";
|
||||
reg = <0 0x00000000 0x04000000>,
|
||||
<1 0x00000000 0x04000000>;
|
||||
bank-width = <4>;
|
||||
};
|
||||
|
||||
v2m_sysctl: sysctl@1000 {
|
||||
compatible = "arm,sp810", "arm,primecell";
|
||||
reg = <0x01000 0x1000>;
|
||||
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
|
||||
clock-names = "refclk", "timclk", "apb_pclk";
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
|
||||
assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
|
||||
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
|
||||
psram@2,00000000 {
|
||||
compatible = "arm,vexpress-psram", "mtd-ram";
|
||||
reg = <2 0x00000000 0x02000000>;
|
||||
bank-width = <4>;
|
||||
};
|
||||
|
||||
/* PCI-E I2C bus */
|
||||
v2m_i2c_pcie: i2c@2000 {
|
||||
compatible = "arm,versatile-i2c";
|
||||
reg = <0x02000 0x1000>;
|
||||
v2m_video_ram: vram@3,00000000 {
|
||||
compatible = "arm,vexpress-vram";
|
||||
reg = <3 0x00000000 0x00800000>;
|
||||
};
|
||||
|
||||
ethernet@3,02000000 {
|
||||
compatible = "smsc,lan9118", "smsc,lan9115";
|
||||
reg = <3 0x02000000 0x10000>;
|
||||
interrupts = <15>;
|
||||
phy-mode = "mii";
|
||||
reg-io-width = <4>;
|
||||
smsc,irq-active-high;
|
||||
smsc,irq-push-pull;
|
||||
vdd33a-supply = <&v2m_fixed_3v3>;
|
||||
vddvario-supply = <&v2m_fixed_3v3>;
|
||||
};
|
||||
|
||||
usb@3,03000000 {
|
||||
compatible = "nxp,usb-isp1761";
|
||||
reg = <3 0x03000000 0x20000>;
|
||||
interrupts = <16>;
|
||||
port1-otg;
|
||||
};
|
||||
|
||||
iofpga@7,00000000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 7 0 0x20000>;
|
||||
|
||||
pcie-switch@60 {
|
||||
compatible = "idt,89hpes32h8";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
v2m_sysreg: sysreg@0 {
|
||||
compatible = "arm,vexpress-sysreg";
|
||||
reg = <0x00000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0x1000>;
|
||||
|
||||
aaci@4000 {
|
||||
compatible = "arm,pl041", "arm,primecell";
|
||||
reg = <0x04000 0x1000>;
|
||||
interrupts = <11>;
|
||||
clocks = <&smbclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
v2m_led_gpios: gpio@8 {
|
||||
compatible = "arm,vexpress-sysreg,sys_led";
|
||||
reg = <0x008 4>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
mmci@5000 {
|
||||
compatible = "arm,pl180", "arm,primecell";
|
||||
reg = <0x05000 0x1000>;
|
||||
interrupts = <9 10>;
|
||||
cd-gpios = <&v2m_mmc_gpios 0 0>;
|
||||
wp-gpios = <&v2m_mmc_gpios 1 0>;
|
||||
max-frequency = <12000000>;
|
||||
vmmc-supply = <&v2m_fixed_3v3>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "mclk", "apb_pclk";
|
||||
};
|
||||
v2m_mmc_gpios: gpio@48 {
|
||||
compatible = "arm,vexpress-sysreg,sys_mci";
|
||||
reg = <0x048 4>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
kmi@6000 {
|
||||
compatible = "arm,pl050", "arm,primecell";
|
||||
reg = <0x06000 0x1000>;
|
||||
interrupts = <12>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "KMIREFCLK", "apb_pclk";
|
||||
};
|
||||
|
||||
kmi@7000 {
|
||||
compatible = "arm,pl050", "arm,primecell";
|
||||
reg = <0x07000 0x1000>;
|
||||
interrupts = <13>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "KMIREFCLK", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial0: uart@9000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x09000 0x1000>;
|
||||
interrupts = <5>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial1: uart@a000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0a000 0x1000>;
|
||||
interrupts = <6>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial2: uart@b000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0b000 0x1000>;
|
||||
interrupts = <7>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial3: uart@c000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0c000 0x1000>;
|
||||
interrupts = <8>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
wdt@f000 {
|
||||
compatible = "arm,sp805", "arm,primecell";
|
||||
reg = <0x0f000 0x1000>;
|
||||
interrupts = <0>;
|
||||
clocks = <&v2m_refclk32khz>, <&smbclk>;
|
||||
clock-names = "wdogclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_timer01: timer@11000 {
|
||||
compatible = "arm,sp804", "arm,primecell";
|
||||
reg = <0x11000 0x1000>;
|
||||
interrupts = <2>;
|
||||
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
|
||||
clock-names = "timclken1", "timclken2", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_timer23: timer@12000 {
|
||||
compatible = "arm,sp804", "arm,primecell";
|
||||
reg = <0x12000 0x1000>;
|
||||
interrupts = <3>;
|
||||
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
|
||||
clock-names = "timclken1", "timclken2", "apb_pclk";
|
||||
};
|
||||
|
||||
/* DVI I2C bus */
|
||||
v2m_i2c_dvi: i2c@16000 {
|
||||
compatible = "arm,versatile-i2c";
|
||||
reg = <0x16000 0x1000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dvi-transmitter@39 {
|
||||
compatible = "sil,sii9022-tpi", "sil,sii9022";
|
||||
reg = <0x39>;
|
||||
};
|
||||
|
||||
dvi-transmitter@60 {
|
||||
compatible = "sil,sii9022-cpi", "sil,sii9022";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@17000 {
|
||||
compatible = "arm,pl031", "arm,primecell";
|
||||
reg = <0x17000 0x1000>;
|
||||
interrupts = <4>;
|
||||
clocks = <&smbclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
compact-flash@1a000 {
|
||||
compatible = "arm,vexpress-cf", "ata-generic";
|
||||
reg = <0x1a000 0x100
|
||||
0x1a100 0xf00>;
|
||||
reg-shift = <2>;
|
||||
};
|
||||
|
||||
clcd@1f000 {
|
||||
compatible = "arm,pl111", "arm,primecell";
|
||||
reg = <0x1f000 0x1000>;
|
||||
interrupt-names = "combined";
|
||||
interrupts = <14>;
|
||||
clocks = <&v2m_oscclk1>, <&smbclk>;
|
||||
clock-names = "clcdclk", "apb_pclk";
|
||||
memory-region = <&v2m_video_ram>;
|
||||
max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
|
||||
|
||||
port {
|
||||
v2m_clcd_pads: endpoint {
|
||||
remote-endpoint = <&v2m_clcd_panel>;
|
||||
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
||||
v2m_flash_gpios: gpio@4c {
|
||||
compatible = "arm,vexpress-sysreg,sys_flash";
|
||||
reg = <0x04c 4>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "panel-dpi";
|
||||
v2m_sysctl: sysctl@1000 {
|
||||
compatible = "arm,sp810", "arm,primecell";
|
||||
reg = <0x01000 0x1000>;
|
||||
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
|
||||
clock-names = "refclk", "timclk", "apb_pclk";
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
|
||||
assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
|
||||
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
|
||||
};
|
||||
|
||||
/* PCI-E I2C bus */
|
||||
v2m_i2c_pcie: i2c@2000 {
|
||||
compatible = "arm,versatile-i2c";
|
||||
reg = <0x02000 0x1000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pcie-switch@60 {
|
||||
compatible = "idt,89hpes32h8";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
aaci@4000 {
|
||||
compatible = "arm,pl041", "arm,primecell";
|
||||
reg = <0x04000 0x1000>;
|
||||
interrupts = <11>;
|
||||
clocks = <&smbclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
mmci@5000 {
|
||||
compatible = "arm,pl180", "arm,primecell";
|
||||
reg = <0x05000 0x1000>;
|
||||
interrupts = <9 10>;
|
||||
cd-gpios = <&v2m_mmc_gpios 0 0>;
|
||||
wp-gpios = <&v2m_mmc_gpios 1 0>;
|
||||
max-frequency = <12000000>;
|
||||
vmmc-supply = <&v2m_fixed_3v3>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "mclk", "apb_pclk";
|
||||
};
|
||||
|
||||
kmi@6000 {
|
||||
compatible = "arm,pl050", "arm,primecell";
|
||||
reg = <0x06000 0x1000>;
|
||||
interrupts = <12>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "KMIREFCLK", "apb_pclk";
|
||||
};
|
||||
|
||||
kmi@7000 {
|
||||
compatible = "arm,pl050", "arm,primecell";
|
||||
reg = <0x07000 0x1000>;
|
||||
interrupts = <13>;
|
||||
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
||||
clock-names = "KMIREFCLK", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial0: uart@9000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x09000 0x1000>;
|
||||
interrupts = <5>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial1: uart@a000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0a000 0x1000>;
|
||||
interrupts = <6>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial2: uart@b000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0b000 0x1000>;
|
||||
interrupts = <7>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_serial3: uart@c000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0c000 0x1000>;
|
||||
interrupts = <8>;
|
||||
clocks = <&v2m_oscclk2>, <&smbclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
wdt@f000 {
|
||||
compatible = "arm,sp805", "arm,primecell";
|
||||
reg = <0x0f000 0x1000>;
|
||||
interrupts = <0>;
|
||||
clocks = <&v2m_refclk32khz>, <&smbclk>;
|
||||
clock-names = "wdogclk", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_timer01: timer@11000 {
|
||||
compatible = "arm,sp804", "arm,primecell";
|
||||
reg = <0x11000 0x1000>;
|
||||
interrupts = <2>;
|
||||
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
|
||||
clock-names = "timclken1", "timclken2", "apb_pclk";
|
||||
};
|
||||
|
||||
v2m_timer23: timer@12000 {
|
||||
compatible = "arm,sp804", "arm,primecell";
|
||||
reg = <0x12000 0x1000>;
|
||||
interrupts = <3>;
|
||||
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
|
||||
clock-names = "timclken1", "timclken2", "apb_pclk";
|
||||
};
|
||||
|
||||
/* DVI I2C bus */
|
||||
v2m_i2c_dvi: i2c@16000 {
|
||||
compatible = "arm,versatile-i2c";
|
||||
reg = <0x16000 0x1000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dvi-transmitter@39 {
|
||||
compatible = "sil,sii9022-tpi", "sil,sii9022";
|
||||
reg = <0x39>;
|
||||
};
|
||||
|
||||
dvi-transmitter@60 {
|
||||
compatible = "sil,sii9022-cpi", "sil,sii9022";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@17000 {
|
||||
compatible = "arm,pl031", "arm,primecell";
|
||||
reg = <0x17000 0x1000>;
|
||||
interrupts = <4>;
|
||||
clocks = <&smbclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
compact-flash@1a000 {
|
||||
compatible = "arm,vexpress-cf", "ata-generic";
|
||||
reg = <0x1a000 0x100
|
||||
0x1a100 0xf00>;
|
||||
reg-shift = <2>;
|
||||
};
|
||||
|
||||
clcd@1f000 {
|
||||
compatible = "arm,pl111", "arm,primecell";
|
||||
reg = <0x1f000 0x1000>;
|
||||
interrupt-names = "combined";
|
||||
interrupts = <14>;
|
||||
clocks = <&v2m_oscclk1>, <&smbclk>;
|
||||
clock-names = "clcdclk", "apb_pclk";
|
||||
memory-region = <&v2m_video_ram>;
|
||||
max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
|
||||
|
||||
port {
|
||||
v2m_clcd_panel: endpoint {
|
||||
remote-endpoint = <&v2m_clcd_pads>;
|
||||
v2m_clcd_pads: endpoint {
|
||||
remote-endpoint = <&v2m_clcd_panel>;
|
||||
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
||||
};
|
||||
};
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <25175000>;
|
||||
hactive = <640>;
|
||||
hback-porch = <40>;
|
||||
hfront-porch = <24>;
|
||||
hsync-len = <96>;
|
||||
vactive = <480>;
|
||||
vback-porch = <32>;
|
||||
vfront-porch = <11>;
|
||||
vsync-len = <2>;
|
||||
panel {
|
||||
compatible = "panel-dpi";
|
||||
|
||||
port {
|
||||
v2m_clcd_panel: endpoint {
|
||||
remote-endpoint = <&v2m_clcd_pads>;
|
||||
};
|
||||
};
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <25175000>;
|
||||
hactive = <640>;
|
||||
hback-porch = <40>;
|
||||
hfront-porch = <24>;
|
||||
hsync-len = <96>;
|
||||
vactive = <480>;
|
||||
vback-porch = <32>;
|
||||
vfront-porch = <11>;
|
||||
vsync-len = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
v2m_fixed_3v3: fixed-regulator-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
v2m_clk24mhz: clk24mhz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "v2m:clk24mhz";
|
||||
};
|
||||
|
||||
v2m_refclk1mhz: refclk1mhz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <1000000>;
|
||||
clock-output-names = "v2m:refclk1mhz";
|
||||
};
|
||||
|
||||
v2m_refclk32khz: refclk32khz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "v2m:refclk32khz";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
user1 {
|
||||
label = "v2m:green:user1";
|
||||
gpios = <&v2m_led_gpios 0 0>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
user2 {
|
||||
label = "v2m:green:user2";
|
||||
gpios = <&v2m_led_gpios 1 0>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
|
||||
user3 {
|
||||
label = "v2m:green:user3";
|
||||
gpios = <&v2m_led_gpios 2 0>;
|
||||
linux,default-trigger = "cpu0";
|
||||
};
|
||||
|
||||
user4 {
|
||||
label = "v2m:green:user4";
|
||||
gpios = <&v2m_led_gpios 3 0>;
|
||||
linux,default-trigger = "cpu1";
|
||||
};
|
||||
|
||||
user5 {
|
||||
label = "v2m:green:user5";
|
||||
gpios = <&v2m_led_gpios 4 0>;
|
||||
linux,default-trigger = "cpu2";
|
||||
};
|
||||
|
||||
user6 {
|
||||
label = "v2m:green:user6";
|
||||
gpios = <&v2m_led_gpios 5 0>;
|
||||
linux,default-trigger = "cpu3";
|
||||
};
|
||||
|
||||
user7 {
|
||||
label = "v2m:green:user7";
|
||||
gpios = <&v2m_led_gpios 6 0>;
|
||||
linux,default-trigger = "cpu4";
|
||||
};
|
||||
|
||||
user8 {
|
||||
label = "v2m:green:user8";
|
||||
gpios = <&v2m_led_gpios 7 0>;
|
||||
linux,default-trigger = "cpu5";
|
||||
};
|
||||
};
|
||||
|
||||
mcc {
|
||||
compatible = "arm,vexpress,config-bus";
|
||||
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||||
|
||||
oscclk0 {
|
||||
/* MCC static memory clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 0>;
|
||||
freq-range = <25000000 60000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk0";
|
||||
};
|
||||
|
||||
v2m_oscclk1: oscclk1 {
|
||||
/* CLCD clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 1>;
|
||||
freq-range = <23750000 65000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk1";
|
||||
};
|
||||
|
||||
v2m_oscclk2: oscclk2 {
|
||||
/* IO FPGA peripheral clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 2>;
|
||||
freq-range = <24000000 24000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk2";
|
||||
};
|
||||
|
||||
volt-vio {
|
||||
/* Logic level voltage */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 0>;
|
||||
regulator-name = "VIO";
|
||||
v2m_fixed_3v3: fixed-regulator-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
label = "VIO";
|
||||
};
|
||||
|
||||
temp-mcc {
|
||||
/* MCC internal operating temperature */
|
||||
compatible = "arm,vexpress-temp";
|
||||
arm,vexpress-sysreg,func = <4 0>;
|
||||
label = "MCC";
|
||||
v2m_clk24mhz: clk24mhz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "v2m:clk24mhz";
|
||||
};
|
||||
|
||||
reset {
|
||||
compatible = "arm,vexpress-reset";
|
||||
arm,vexpress-sysreg,func = <5 0>;
|
||||
v2m_refclk1mhz: refclk1mhz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <1000000>;
|
||||
clock-output-names = "v2m:refclk1mhz";
|
||||
};
|
||||
|
||||
muxfpga {
|
||||
compatible = "arm,vexpress-muxfpga";
|
||||
arm,vexpress-sysreg,func = <7 0>;
|
||||
v2m_refclk32khz: refclk32khz {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "v2m:refclk32khz";
|
||||
};
|
||||
|
||||
shutdown {
|
||||
compatible = "arm,vexpress-shutdown";
|
||||
arm,vexpress-sysreg,func = <8 0>;
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
user1 {
|
||||
label = "v2m:green:user1";
|
||||
gpios = <&v2m_led_gpios 0 0>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
user2 {
|
||||
label = "v2m:green:user2";
|
||||
gpios = <&v2m_led_gpios 1 0>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
|
||||
user3 {
|
||||
label = "v2m:green:user3";
|
||||
gpios = <&v2m_led_gpios 2 0>;
|
||||
linux,default-trigger = "cpu0";
|
||||
};
|
||||
|
||||
user4 {
|
||||
label = "v2m:green:user4";
|
||||
gpios = <&v2m_led_gpios 3 0>;
|
||||
linux,default-trigger = "cpu1";
|
||||
};
|
||||
|
||||
user5 {
|
||||
label = "v2m:green:user5";
|
||||
gpios = <&v2m_led_gpios 4 0>;
|
||||
linux,default-trigger = "cpu2";
|
||||
};
|
||||
|
||||
user6 {
|
||||
label = "v2m:green:user6";
|
||||
gpios = <&v2m_led_gpios 5 0>;
|
||||
linux,default-trigger = "cpu3";
|
||||
};
|
||||
|
||||
user7 {
|
||||
label = "v2m:green:user7";
|
||||
gpios = <&v2m_led_gpios 6 0>;
|
||||
linux,default-trigger = "cpu4";
|
||||
};
|
||||
|
||||
user8 {
|
||||
label = "v2m:green:user8";
|
||||
gpios = <&v2m_led_gpios 7 0>;
|
||||
linux,default-trigger = "cpu5";
|
||||
};
|
||||
};
|
||||
|
||||
reboot {
|
||||
compatible = "arm,vexpress-reboot";
|
||||
arm,vexpress-sysreg,func = <9 0>;
|
||||
};
|
||||
mcc {
|
||||
compatible = "arm,vexpress,config-bus";
|
||||
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||||
|
||||
dvimode {
|
||||
compatible = "arm,vexpress-dvimode";
|
||||
arm,vexpress-sysreg,func = <11 0>;
|
||||
oscclk0 {
|
||||
/* MCC static memory clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 0>;
|
||||
freq-range = <25000000 60000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk0";
|
||||
};
|
||||
|
||||
v2m_oscclk1: oscclk1 {
|
||||
/* CLCD clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 1>;
|
||||
freq-range = <23750000 65000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk1";
|
||||
};
|
||||
|
||||
v2m_oscclk2: oscclk2 {
|
||||
/* IO FPGA peripheral clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 2>;
|
||||
freq-range = <24000000 24000000>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "v2m:oscclk2";
|
||||
};
|
||||
|
||||
volt-vio {
|
||||
/* Logic level voltage */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 0>;
|
||||
regulator-name = "VIO";
|
||||
regulator-always-on;
|
||||
label = "VIO";
|
||||
};
|
||||
|
||||
temp-mcc {
|
||||
/* MCC internal operating temperature */
|
||||
compatible = "arm,vexpress-temp";
|
||||
arm,vexpress-sysreg,func = <4 0>;
|
||||
label = "MCC";
|
||||
};
|
||||
|
||||
reset {
|
||||
compatible = "arm,vexpress-reset";
|
||||
arm,vexpress-sysreg,func = <5 0>;
|
||||
};
|
||||
|
||||
muxfpga {
|
||||
compatible = "arm,vexpress-muxfpga";
|
||||
arm,vexpress-sysreg,func = <7 0>;
|
||||
};
|
||||
|
||||
shutdown {
|
||||
compatible = "arm,vexpress-shutdown";
|
||||
arm,vexpress-sysreg,func = <8 0>;
|
||||
};
|
||||
|
||||
reboot {
|
||||
compatible = "arm,vexpress-reboot";
|
||||
arm,vexpress-sysreg,func = <9 0>;
|
||||
};
|
||||
|
||||
dvimode {
|
||||
compatible = "arm,vexpress-dvimode";
|
||||
arm,vexpress-sysreg,func = <11 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -9,6 +9,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "vexpress-v2m-rs1.dtsi"
|
||||
|
||||
/ {
|
||||
model = "V2P-CA15";
|
||||
|
|
@ -278,8 +279,6 @@ smb@8000000 {
|
|||
<0 0 40 &gic 0 40 4>,
|
||||
<0 0 41 &gic 0 41 4>,
|
||||
<0 0 42 &gic 0 42 4>;
|
||||
|
||||
/include/ "vexpress-v2m-rs1.dtsi"
|
||||
};
|
||||
|
||||
site2: hsb@40000000 {
|
||||
|
|
|
|||
|
|
@ -9,6 +9,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "vexpress-v2m-rs1.dtsi"
|
||||
|
||||
/ {
|
||||
model = "V2P-CA15_CA7";
|
||||
|
|
@ -203,7 +204,7 @@ timer {
|
|||
<1 10 0xf08>;
|
||||
};
|
||||
|
||||
pmu_a15 {
|
||||
pmu-a15 {
|
||||
compatible = "arm,cortex-a15-pmu";
|
||||
interrupts = <0 68 4>,
|
||||
<0 69 4>;
|
||||
|
|
@ -211,7 +212,7 @@ pmu_a15 {
|
|||
<&cpu1>;
|
||||
};
|
||||
|
||||
pmu_a7 {
|
||||
pmu-a7 {
|
||||
compatible = "arm,cortex-a7-pmu";
|
||||
interrupts = <0 128 4>,
|
||||
<0 129 4>,
|
||||
|
|
@ -584,7 +585,7 @@ etm2_out_port: endpoint {
|
|||
};
|
||||
};
|
||||
|
||||
smb@8000000 {
|
||||
smb: smb@8000000 {
|
||||
compatible = "simple-bus";
|
||||
|
||||
#address-cells = <2>;
|
||||
|
|
@ -641,8 +642,6 @@ smb@8000000 {
|
|||
<0 0 40 &gic 0 40 4>,
|
||||
<0 0 41 &gic 0 41 4>,
|
||||
<0 0 42 &gic 0 42 4>;
|
||||
|
||||
/include/ "vexpress-v2m-rs1.dtsi"
|
||||
};
|
||||
|
||||
site2: hsb@40000000 {
|
||||
|
|
|
|||
|
|
@ -9,6 +9,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "vexpress-v2m-rs1.dtsi"
|
||||
|
||||
/ {
|
||||
model = "V2P-CA5s";
|
||||
|
|
@ -191,7 +192,7 @@ temp-dcc {
|
|||
};
|
||||
};
|
||||
|
||||
smb@8000000 {
|
||||
smb: smb@8000000 {
|
||||
compatible = "simple-bus";
|
||||
|
||||
#address-cells = <2>;
|
||||
|
|
@ -248,8 +249,6 @@ smb@8000000 {
|
|||
<0 0 40 &gic 0 40 4>,
|
||||
<0 0 41 &gic 0 41 4>,
|
||||
<0 0 42 &gic 0 42 4>;
|
||||
|
||||
/include/ "vexpress-v2m-rs1.dtsi"
|
||||
};
|
||||
|
||||
site2: hsb@40000000 {
|
||||
|
|
|
|||
|
|
@ -9,6 +9,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "vexpress-v2m.dtsi"
|
||||
|
||||
/ {
|
||||
model = "V2P-CA9";
|
||||
|
|
@ -301,7 +302,7 @@ power-vd10-s3 {
|
|||
};
|
||||
};
|
||||
|
||||
smb@4000000 {
|
||||
smb: smb@4000000 {
|
||||
compatible = "simple-bus";
|
||||
|
||||
#address-cells = <2>;
|
||||
|
|
@ -357,8 +358,6 @@ smb@4000000 {
|
|||
<0 0 40 &gic 0 40 4>,
|
||||
<0 0 41 &gic 0 41 4>,
|
||||
<0 0 42 &gic 0 42 4>;
|
||||
|
||||
/include/ "vexpress-v2m.dtsi"
|
||||
};
|
||||
|
||||
site2: hsb@e0000000 {
|
||||
|
|
|
|||
|
|
@ -13,6 +13,7 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include "vexpress-v2m-rs1.dtsi"
|
||||
|
||||
/ {
|
||||
model = "V2F-1XV7 Cortex-A53x2 SMM";
|
||||
|
|
@ -129,7 +130,7 @@ temp-fpga {
|
|||
};
|
||||
};
|
||||
|
||||
smb@8000000 {
|
||||
smb: smb@8000000 {
|
||||
compatible = "simple-bus";
|
||||
|
||||
#address-cells = <2>;
|
||||
|
|
@ -186,7 +187,5 @@ smb@8000000 {
|
|||
<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
/include/ "vexpress-v2m-rs1.dtsi"
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue