diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 0806f72102c0..5fb5e93d1547 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -990,36 +990,6 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, goto out; } -/** - * doc_read - Read bytes from flash - * @mtd: the device - * @from: the offset from first block and first page, in bytes, aligned on page - * size - * @len: the number of bytes to read (must be a multiple of 4) - * @retlen: the number of bytes actually read - * @buf: the filled in buffer - * - * Reads flash memory pages. This function does not read the OOB chunk, but only - * the page data. - * - * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred - */ -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - struct mtd_oob_ops ops; - size_t ret; - - memset(&ops, 0, sizeof(ops)); - ops.datbuf = buf; - ops.len = len; - ops.mode = MTD_OPS_AUTO_OOB; - - ret = doc_read_oob(mtd, from, &ops); - *retlen = ops.retlen; - return ret; -} - static int doc_reload_bbt(struct docg3 *docg3) { int block = DOC_LAYOUT_BLOCK_BBT; @@ -1513,39 +1483,6 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, return ret; } -/** - * doc_write - Write a buffer to the chip - * @mtd: the device - * @to: the offset from first block and first page, in bytes, aligned on page - * size - * @len: the number of bytes to write (must be a full page size, ie. 512) - * @retlen: the number of bytes actually written (0 or 512) - * @buf: the buffer to get bytes from - * - * Writes data to the chip. - * - * Returns 0 if write successful, -EIO if write error - */ -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - struct docg3 *docg3 = mtd->priv; - int ret; - struct mtd_oob_ops ops; - - doc_dbg("doc_write(to=%lld, len=%zu)\n", to, len); - ops.datbuf = (char *)buf; - ops.len = len; - ops.mode = MTD_OPS_PLACE_OOB; - ops.oobbuf = NULL; - ops.ooblen = 0; - ops.ooboffs = 0; - - ret = doc_write_oob(mtd, to, &ops); - *retlen = ops.retlen; - return ret; -} - static struct docg3 *sysfs_dev2docg3(struct device *dev, struct device_attribute *attr) { @@ -1866,8 +1803,6 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE; mtd->oobsize = DOC_LAYOUT_OOB_SIZE; mtd->_erase = doc_erase; - mtd->_read = doc_read; - mtd->_write = doc_write; mtd->_read_oob = doc_read_oob; mtd->_write_oob = doc_write_oob; mtd->_block_isbad = doc_block_isbad; diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 642c35dde686..d7ab091b36b2 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1058,7 +1058,20 @@ int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, * representing the maximum number of bitflips that were corrected on * any one ecc region (if applicable; zero otherwise). */ - ret_code = mtd->_read(mtd, from, len, retlen, buf); + if (mtd->_read) { + ret_code = mtd->_read(mtd, from, len, retlen, buf); + } else if (mtd->_read_oob) { + struct mtd_oob_ops ops = { + .len = len, + .datbuf = buf, + }; + + ret_code = mtd->_read_oob(mtd, from, &ops); + *retlen = ops.retlen; + } else { + return -ENOTSUPP; + } + if (unlikely(ret_code < 0)) return ret_code; if (mtd->ecc_strength == 0) @@ -1073,11 +1086,25 @@ int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, *retlen = 0; if (to < 0 || to >= mtd->size || len > mtd->size - to) return -EINVAL; - if (!mtd->_write || !(mtd->flags & MTD_WRITEABLE)) + if ((!mtd->_write && !mtd->_write_oob) || + !(mtd->flags & MTD_WRITEABLE)) return -EROFS; if (!len) return 0; ledtrig_mtd_activity(); + + if (!mtd->_write) { + struct mtd_oob_ops ops = { + .len = len, + .datbuf = (u8 *)buf, + }; + int ret; + + ret = mtd->_write_oob(mtd, to, &ops); + *retlen = ops.retlen; + return ret; + } + return mtd->_write(mtd, to, len, retlen, buf); } EXPORT_SYMBOL_GPL(mtd_write); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 79bf1f61c7a0..dd28cb0de2c8 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -437,8 +437,10 @@ static struct mtd_part *allocate_partition(struct mtd_info *parent, parent->dev.parent; slave->mtd.dev.of_node = part->of_node; - slave->mtd._read = part_read; - slave->mtd._write = part_write; + if (parent->_read) + slave->mtd._read = part_read; + if (parent->_write) + slave->mtd._write = part_write; if (parent->_panic_write) slave->mtd._panic_write = part_panic_write; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 6135d007a068..889ceadbf607 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2026,33 +2026,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, return max_bitflips; } -/** - * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc - * @mtd: MTD device structure - * @from: offset to read from - * @len: number of bytes to read - * @retlen: pointer to variable to store the number of read bytes - * @buf: the databuffer to put data - * - * Get hold of the chip and call nand_do_read. - */ -static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, uint8_t *buf) -{ - struct mtd_oob_ops ops; - int ret; - - nand_get_device(mtd, FL_READING); - memset(&ops, 0, sizeof(ops)); - ops.len = len; - ops.datbuf = buf; - ops.mode = MTD_OPS_PLACE_OOB; - ret = nand_do_read_ops(mtd, from, &ops); - *retlen = ops.retlen; - nand_release_device(mtd); - return ret; -} - /** * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function * @mtd: mtd info structure @@ -2821,33 +2794,6 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, return ret; } -/** - * nand_write - [MTD Interface] NAND write with ECC - * @mtd: MTD device structure - * @to: offset to write to - * @len: number of bytes to write - * @retlen: pointer to variable to store the number of written bytes - * @buf: the data to write - * - * NAND write with ECC. - */ -static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const uint8_t *buf) -{ - struct mtd_oob_ops ops; - int ret; - - nand_get_device(mtd, FL_WRITING); - memset(&ops, 0, sizeof(ops)); - ops.len = len; - ops.datbuf = (uint8_t *)buf; - ops.mode = MTD_OPS_PLACE_OOB; - ret = nand_do_write_ops(mtd, to, &ops); - *retlen = ops.retlen; - nand_release_device(mtd); - return ret; -} - /** * nand_do_write_oob - [MTD Interface] NAND write out-of-band * @mtd: MTD device structure @@ -4917,8 +4863,6 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->_erase = nand_erase; mtd->_point = NULL; mtd->_unpoint = NULL; - mtd->_read = nand_read; - mtd->_write = nand_write; mtd->_panic_write = panic_nand_write; mtd->_read_oob = nand_read_oob; mtd->_write_oob = nand_write_oob; diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 1a6d0e367b89..050ba8a87543 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1447,38 +1447,6 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, return 0; } -/** - * onenand_read - [MTD Interface] Read data from flash - * @param mtd MTD device structure - * @param from offset to read from - * @param len number of bytes to read - * @param retlen pointer to variable to store the number of read bytes - * @param buf the databuffer to put data - * - * Read with ecc -*/ -static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - struct onenand_chip *this = mtd->priv; - struct mtd_oob_ops ops = { - .len = len, - .ooblen = 0, - .datbuf = buf, - .oobbuf = NULL, - }; - int ret; - - onenand_get_device(mtd, FL_READING); - ret = ONENAND_IS_4KB_PAGE(this) ? - onenand_mlc_read_ops_nolock(mtd, from, &ops) : - onenand_read_ops_nolock(mtd, from, &ops); - onenand_release_device(mtd); - - *retlen = ops.retlen; - return ret; -} - /** * onenand_read_oob - [MTD Interface] Read main and/or out-of-band * @param mtd: MTD device structure @@ -2128,35 +2096,6 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, return ret; } -/** - * onenand_write - [MTD Interface] write buffer to FLASH - * @param mtd MTD device structure - * @param to offset to write to - * @param len number of bytes to write - * @param retlen pointer to variable to store the number of written bytes - * @param buf the data to write - * - * Write with ECC - */ -static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - struct mtd_oob_ops ops = { - .len = len, - .ooblen = 0, - .datbuf = (u_char *) buf, - .oobbuf = NULL, - }; - int ret; - - onenand_get_device(mtd, FL_WRITING); - ret = onenand_write_ops_nolock(mtd, to, &ops); - onenand_release_device(mtd); - - *retlen = ops.retlen; - return ret; -} - /** * onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band * @param mtd: MTD device structure @@ -4038,8 +3977,6 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) mtd->_erase = onenand_erase; mtd->_point = NULL; mtd->_unpoint = NULL; - mtd->_read = onenand_read; - mtd->_write = onenand_write; mtd->_read_oob = onenand_read_oob; mtd->_write_oob = onenand_write_oob; mtd->_panic_write = onenand_panic_write;