openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge branch 'spear/pcie-support-v10' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux into next/drivers 

Merge "ARM: SPEAr13xx PCIe updates for v3.17" from Viresh Kumar:

This is another attempt to merge SPEAr PCIe updates after olof
pointed out *enough* issues with initial PULL request:

https://lkml.org/lkml/2014/7/9/641

Last version was sent here: http://patchwork.ozlabs.org/patch/368479/
and all the nits pointed out by Kishon & Bjorn are fixed in this pull
request.

Apart from ARM specific changes, this updates drivers/{pci|phy}. Bjorn
advised to get complete series via arm-soc tree earlier:

http://www.spinics.net/lists/linux-pci/msg30271.html

* 'spear/pcie-support-v10' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
  ARM: SPEAr13xx: Update defconfigs
  ARM: SPEAr13xx: Add pcie and miphy DT nodes
  ARM: SPEAr13xx: Add bindings and dt node for misc block
  ARM: SPEAr13xx: Fix static mapping table
  phy: Add drivers for PCIe and SATA phy on SPEAr13xx
  PCI: spear: Add PCIe driver for ST Microelectronics SPEAr13xx

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2014-07-18 21:49:41 -07:00
parent bde19a7e74 f6e670a3b6
commit 25f003285b
21 changed files with 1211 additions and 133 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Documentation/devicetree/bindings/arm/spear-misc.txt Normal file
View File

@ -0,0 +1,9 @@
SPEAr Misc configuration
===========================
SPEAr SOCs have some miscellaneous registers which are used to configure
few properties of different peripheral controllers.
misc node required properties:
- compatible Should be "st,spear1340-misc", "syscon".
- reg: Address range of misc space upto 8K

14
Documentation/devicetree/bindings/pci/spear13xx-pcie.txt Normal file
View File

@ -0,0 +1,14 @@
SPEAr13XX PCIe DT detail:
================================
SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy
controller.
Required properties:
- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
- phys : phandle to phy node associated with pcie controller
- phy-names : must be "pcie-phy"
- All other definitions as per generic PCI bindings
Optional properties:
- st,pcie-is-gen1 indicates that forced gen1 initialization is needed.

15
Documentation/devicetree/bindings/phy/st-spear-miphy.txt Normal file
View File

@ -0,0 +1,15 @@
ST SPEAr miphy DT details
=========================
ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA.
Required properties:
- compatible : should be "st,spear1310-miphy" or "st,spear1340-miphy"
- reg : offset and length of the PHY register set.
- misc: phandle for the syscon node to access misc registers
- #phy-cells : from the generic PHY bindings, must be 1.
- cell[1]: 0 if phy used for SATA, 1 for PCIe.
Optional properties:
- phy-id: Instance id of the phy. Only required when there are multiple phys
present on a implementation.

6
MAINTAINERS
View File

@ -6820,6 +6820,12 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/host-generic-pci.txt F: Documentation/devicetree/bindings/pci/host-generic-pci.txt
F: drivers/pci/host/pci-host-generic.c F: drivers/pci/host/pci-host-generic.c
PCIE DRIVER FOR ST SPEAR13XX
M: Mohit Kumar <mohit.kumar@st.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*spear*
PCMCIA SUBSYSTEM PCMCIA SUBSYSTEM
P: Linux PCMCIA Team P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org L: linux-pcmcia@lists.infradead.org

4
arch/arm/boot/dts/spear1310-evb.dts
View File

@ -106,6 +106,10 @@ ahci@b1000000 {
status = "okay"; status = "okay";
}; };
miphy@eb800000 {
status = "okay";
};
cf@b2800000 { cf@b2800000 {
status = "okay"; status = "okay";
}; };

93
arch/arm/boot/dts/spear1310.dtsi
View File

@ -29,24 +29,111 @@ spics: spics@e0700000{
#gpio-cells = <2>; #gpio-cells = <2>;
}; };
ahci@b1000000 { miphy0: miphy@eb800000 {
compatible = "st,spear1310-miphy";
reg = <0xeb800000 0x4000>;
misc = <&misc>;
phy-id = <0>;
#phy-cells = <1>;
status = "disabled";
};
miphy1: miphy@eb804000 {
compatible = "st,spear1310-miphy";
reg = <0xeb804000 0x4000>;
misc = <&misc>;
phy-id = <1>;
#phy-cells = <1>;
status = "disabled";
};
miphy2: miphy@eb808000 {
compatible = "st,spear1310-miphy";
reg = <0xeb808000 0x4000>;
misc = <&misc>;
phy-id = <2>;
#phy-cells = <1>;
status = "disabled";
};
ahci0: ahci@b1000000 {
compatible = "snps,spear-ahci"; compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>; reg = <0xb1000000 0x10000>;
interrupts = <0 68 0x4>; interrupts = <0 68 0x4>;
phys = <&miphy0 0>;
phy-names = "sata-phy";
status = "disabled"; status = "disabled";
}; };
ahci@b1800000 { ahci1: ahci@b1800000 {
compatible = "snps,spear-ahci"; compatible = "snps,spear-ahci";
reg = <0xb1800000 0x10000>; reg = <0xb1800000 0x10000>;
interrupts = <0 69 0x4>; interrupts = <0 69 0x4>;
phys = <&miphy1 0>;
phy-names = "sata-phy";
status = "disabled"; status = "disabled";
}; };
ahci@b4000000 { ahci2: ahci@b4000000 {
compatible = "snps,spear-ahci"; compatible = "snps,spear-ahci";
reg = <0xb4000000 0x10000>; reg = <0xb4000000 0x10000>;
interrupts = <0 70 0x4>; interrupts = <0 70 0x4>;
phys = <&miphy2 0>;
phy-names = "sata-phy";
status = "disabled";
};
pcie0: pcie@b1000000 {
compatible = "st,spear1340-pcie", "snps,dw-pcie";
reg = <0xb1000000 0x4000>;
interrupts = <0 68 0x4>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 0 68 0x4>;
num-lanes = <1>;
phys = <&miphy0 1>;
phy-names = "pcie-phy";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */
0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
status = "disabled";
};
pcie1: pcie@b1800000 {
compatible = "st,spear1340-pcie", "snps,dw-pcie";
reg = <0xb1800000 0x4000>;
interrupts = <0 69 0x4>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 0 69 0x4>;
num-lanes = <1>;
phys = <&miphy1 1>;
phy-names = "pcie-phy";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x00000800 0 0x90000000 0x90000000 0 0x00020000 /* configuration space */
0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
status = "disabled";
};
pcie2: pcie@b4000000 {
compatible = "st,spear1340-pcie", "snps,dw-pcie";
reg = <0xb4000000 0x4000>;
interrupts = <0 70 0x4>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 0 70 0x4>;
num-lanes = <1>;
phys = <&miphy2 1>;
phy-names = "pcie-phy";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x00000800 0 0xc0000000 0xc0000000 0 0x00020000 /* configuration space */
0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
status = "disabled"; status = "disabled";
}; };

4
arch/arm/boot/dts/spear1340-evb.dts
View File

@ -122,6 +122,10 @@ ahci@b1000000 {
status = "okay"; status = "okay";
}; };
miphy@eb800000 {
status = "okay";
};
dma@ea800000 { dma@ea800000 {
status = "okay"; status = "okay";
}; };

30
arch/arm/boot/dts/spear1340.dtsi
View File

@ -31,10 +31,38 @@ spics: spics@e0700000{
status = "disabled"; status = "disabled";
}; };
ahci@b1000000 { miphy0: miphy@eb800000 {
compatible = "st,spear1340-miphy";
reg = <0xeb800000 0x4000>;
misc = <&misc>;
#phy-cells = <1>;
status = "disabled";
};
ahci0: ahci@b1000000 {
compatible = "snps,spear-ahci"; compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>; reg = <0xb1000000 0x10000>;
interrupts = <0 72 0x4>; interrupts = <0 72 0x4>;
phys = <&miphy0 0>;
phy-names = "sata-phy";
status = "disabled";
};
pcie0: pcie@b1000000 {
compatible = "st,spear1340-pcie", "snps,dw-pcie";
reg = <0xb1000000 0x4000>;
interrupts = <0 68 0x4>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0x0 0 &gic 0 68 0x4>;
num-lanes = <1>;
phys = <&miphy0 1>;
phy-names = "pcie-phy";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */
0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
status = "disabled"; status = "disabled";
}; };

9
arch/arm/boot/dts/spear13xx.dtsi
View File

@ -83,8 +83,8 @@ ahb {
#size-cells = <1>; #size-cells = <1>;
compatible = "simple-bus"; compatible = "simple-bus";
ranges = <0x50000000 0x50000000 0x10000000 ranges = <0x50000000 0x50000000 0x10000000
0xb0000000 0xb0000000 0x10000000 0x80000000 0x80000000 0x20000000
0xd0000000 0xd0000000 0x02000000 0xb0000000 0xb0000000 0x22000000
0xd8000000 0xd8000000 0x01000000 0xd8000000 0xd8000000 0x01000000
0xe0000000 0xe0000000 0x10000000>; 0xe0000000 0xe0000000 0x10000000>;
@ -220,6 +220,11 @@ apb {
0xd8000000 0xd8000000 0x01000000 0xd8000000 0xd8000000 0x01000000
0xe0000000 0xe0000000 0x10000000>; 0xe0000000 0xe0000000 0x10000000>;
misc: syscon@e0700000 {
compatible = "st,spear1340-misc", "syscon";
reg = <0xe0700000 0x1000>;
};
gpio0: gpio@e0600000 { gpio0: gpio@e0600000 {
compatible = "arm,pl061", "arm,primecell"; compatible = "arm,pl061", "arm,primecell";
reg = <0xe0600000 0x1000>; reg = <0xe0600000 0x1000>;

16
arch/arm/configs/spear13xx_defconfig
View File

@ -11,13 +11,24 @@ CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y CONFIG_MACH_SPEAR1340=y
# CONFIG_SWP_EMULATE is not set # CONFIG_SWP_EMULATE is not set
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCIE_SPEAR13XX=y
CONFIG_SMP=y CONFIG_SMP=y
# CONFIG_SMP_ON_UP is not set # CONFIG_SMP_ON_UP is not set
# CONFIG_ARM_CPU_TOPOLOGY is not set # CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_AEABI=y
CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_VFP=y
CONFIG_BINFMT_MISC=y CONFIG_BINFMT_MISC=y
CONFIG_NET=y CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y CONFIG_MTD=y
CONFIG_MTD_OF_PARTS=y CONFIG_MTD_OF_PARTS=y
@ -27,6 +38,7 @@ CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSMC=y CONFIG_MTD_NAND_FSMC=y
CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y CONFIG_ATA=y
# CONFIG_SATA_PMP is not set # CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI_PLATFORM=y CONFIG_SATA_AHCI_PLATFORM=y
@ -66,6 +78,7 @@ CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y CONFIG_MMC=y
CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SPEAR=y CONFIG_MMC_SDHCI_SPEAR=y
@ -79,11 +92,14 @@ CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT3_FS_SECURITY=y
CONFIG_AUTOFS4_FS=m CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
CONFIG_MSDOS_FS=m CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=m CONFIG_NLS_ASCII=m

4
arch/arm/mach-spear/Kconfig
View File

@ -19,6 +19,8 @@ config ARCH_SPEAR13XX
select HAVE_ARM_SCU if SMP select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP select HAVE_ARM_TWD if SMP
select PINCTRL select PINCTRL
select MFD_SYSCON
select MIGHT_HAVE_PCI
help help
Supports for ARM's SPEAR13XX family Supports for ARM's SPEAR13XX family
@ -27,12 +29,14 @@ if ARCH_SPEAR13XX
config MACH_SPEAR1310 config MACH_SPEAR1310
bool "SPEAr1310 Machine support with Device Tree" bool "SPEAr1310 Machine support with Device Tree"
select PINCTRL_SPEAR1310 select PINCTRL_SPEAR1310
select PHY_ST_SPEAR1310_MIPHY
help help
Supports ST SPEAr1310 machine configured via the device-tree Supports ST SPEAr1310 machine configured via the device-tree
config MACH_SPEAR1340 config MACH_SPEAR1340
bool "SPEAr1340 Machine support with Device Tree" bool "SPEAr1340 Machine support with Device Tree"
select PINCTRL_SPEAR1340 select PINCTRL_SPEAR1340
select PHY_ST_SPEAR1340_MIPHY
help help
Supports ST SPEAr1340 machine configured via the device-tree Supports ST SPEAr1340 machine configured via the device-tree

4
arch/arm/mach-spear/include/mach/spear.h
View File

@ -52,10 +52,10 @@
#ifdef CONFIG_ARCH_SPEAR13XX #ifdef CONFIG_ARCH_SPEAR13XX
#define PERIP_GRP2_BASE UL(0xB3000000) #define PERIP_GRP2_BASE UL(0xB3000000)
#define VA_PERIP_GRP2_BASE IOMEM(0xFE000000) #define VA_PERIP_GRP2_BASE IOMEM(0xF9000000)
#define MCIF_SDHCI_BASE UL(0xB3000000) #define MCIF_SDHCI_BASE UL(0xB3000000)
#define SYSRAM0_BASE UL(0xB3800000) #define SYSRAM0_BASE UL(0xB3800000)
#define VA_SYSRAM0_BASE IOMEM(0xFE800000) #define VA_SYSRAM0_BASE IOMEM(0xF9800000)
#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600) #define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600)
#define PERIP_GRP1_BASE UL(0xE0000000) #define PERIP_GRP1_BASE UL(0xE0000000)

125
arch/arm/mach-spear/spear1340.c
View File

@ -13,136 +13,13 @@
#define pr_fmt(fmt) "SPEAr1340: " fmt #define pr_fmt(fmt) "SPEAr1340: " fmt
#include <linux/ahci_platform.h>
#include <linux/amba/serial.h>
#include <linux/delay.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include "generic.h" #include "generic.h"
#include <mach/spear.h>
/* FIXME: Move SATA PHY code into a standalone driver */
/* Base addresses */
#define SPEAR1340_SATA_BASE UL(0xB1000000)
/* Power Management Registers */
#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104)
#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108)
#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318)
#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C)
#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320)
/* PCIE - SATA configuration registers */
#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424)
/* PCIE CFG MASks */
#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
#define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
#define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
#define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
#define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
#define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
#define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
#define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
#define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
#define SPEAR1340_PCIE_SATA_SEL_SATA (1)
#define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F
#define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
SPEAR1340_PCIE_CFG_POWERUP_RESET | \
SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
#define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
SPEAR1340_SATA_CFG_PM_CLK_EN | \
SPEAR1340_SATA_CFG_POWERUP_RESET | \
SPEAR1340_SATA_CFG_RX_CLK_EN | \
SPEAR1340_SATA_CFG_TX_CLK_EN)
#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428)
#define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
#define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
#define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
#define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
SPEAR1340_MIPHY_CLK_REF_DIV2 | \
SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
/* SATA device registration */
static int sata_miphy_init(struct device *dev, void __iomem *addr)
{
writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
SPEAR1340_PCIE_MIPHY_CFG);
/* Switch on sata power domain */
writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
msleep(20);
/* Disable PCIE SATA Controller reset */
writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
SPEAR1340_PERIP1_SW_RST);
msleep(20);
return 0;
}
void sata_miphy_exit(struct device *dev)
{
writel(0, SPEAR1340_PCIE_SATA_CFG);
writel(0, SPEAR1340_PCIE_MIPHY_CFG);
/* Enable PCIE SATA Controller reset */
writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
SPEAR1340_PERIP1_SW_RST);
msleep(20);
/* Switch off sata power domain */
writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
msleep(20);
}
int sata_suspend(struct device *dev)
{
if (dev->power.power_state.event == PM_EVENT_FREEZE)
return 0;
sata_miphy_exit(dev);
return 0;
}
int sata_resume(struct device *dev)
{
if (dev->power.power_state.event == PM_EVENT_THAW)
return 0;
return sata_miphy_init(dev, NULL);
}
static struct ahci_platform_data sata_pdata = {
.init = sata_miphy_init,
.exit = sata_miphy_exit,
.suspend = sata_suspend,
.resume = sata_resume,
};
/* Add SPEAr1340 auxdata to pass platform data */
static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
&sata_pdata),
{}
};
static void __init spear1340_dt_init(void) static void __init spear1340_dt_init(void)
{ {
of_platform_populate(NULL, of_default_bus_match_table, of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
spear1340_auxdata_lookup, NULL);
platform_device_register_simple("spear-cpufreq", -1, NULL, 0); platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
} }

2
arch/arm/mach-spear/spear13xx.c
View File

@ -52,7 +52,7 @@ void __init spear13xx_l2x0_init(void)
/* /*
* Following will create 16MB static virtual/physical mappings * Following will create 16MB static virtual/physical mappings
* PHYSICAL VIRTUAL * PHYSICAL VIRTUAL
* 0xB3000000 0xFE000000 * 0xB3000000 0xF9000000
* 0xE0000000 0xFD000000 * 0xE0000000 0xFD000000
* 0xEC000000 0xFC000000 * 0xEC000000 0xFC000000
* 0xED000000 0xFB000000 * 0xED000000 0xFB000000

8
drivers/pci/host/Kconfig
View File

@ -46,4 +46,12 @@ config PCI_HOST_GENERIC
Say Y here if you want to support a simple generic PCI host Say Y here if you want to support a simple generic PCI host
controller, such as the one emulated by kvmtool. controller, such as the one emulated by kvmtool.
config PCIE_SPEAR13XX
tristate "STMicroelectronics SPEAr PCIe controller"
depends on ARCH_SPEAR13XX
select PCIEPORTBUS
select PCIE_DW
help
Say Y here if you want PCIe support on SPEAr13XX SoCs.
endmenu endmenu

1
drivers/pci/host/Makefile
View File

@ -6,3 +6,4 @@ obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o

405
drivers/pci/host/pcie-spear13xx.c Normal file
View File

@ -0,0 +1,405 @@
/*
* PCIe host controller driver for ST Microelectronics SPEAr13xx SoCs
*
* SPEAr13xx PCIe Glue Layer Source Code
*
* Copyright (C) 2010-2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@st.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pci.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/resource.h>
#include "pcie-designware.h"
struct spear13xx_pcie {
void __iomem *app_base;
struct phy *phy;
struct clk *clk;
struct pcie_port pp;
bool is_gen1;
};
struct pcie_app_reg {
u32 app_ctrl_0; /* cr0 */
u32 app_ctrl_1; /* cr1 */
u32 app_status_0; /* cr2 */
u32 app_status_1; /* cr3 */
u32 msg_status; /* cr4 */
u32 msg_payload; /* cr5 */
u32 int_sts; /* cr6 */
u32 int_clr; /* cr7 */
u32 int_mask; /* cr8 */
u32 mst_bmisc; /* cr9 */
u32 phy_ctrl; /* cr10 */
u32 phy_status; /* cr11 */
u32 cxpl_debug_info_0; /* cr12 */
u32 cxpl_debug_info_1; /* cr13 */
u32 ven_msg_ctrl_0; /* cr14 */
u32 ven_msg_ctrl_1; /* cr15 */
u32 ven_msg_data_0; /* cr16 */
u32 ven_msg_data_1; /* cr17 */
u32 ven_msi_0; /* cr18 */
u32 ven_msi_1; /* cr19 */
u32 mst_rmisc; /* cr20 */
};
/* CR0 ID */
#define RX_LANE_FLIP_EN_ID 0
#define TX_LANE_FLIP_EN_ID 1
#define SYS_AUX_PWR_DET_ID 2
#define APP_LTSSM_ENABLE_ID 3
#define SYS_ATTEN_BUTTON_PRESSED_ID 4
#define SYS_MRL_SENSOR_STATE_ID 5
#define SYS_PWR_FAULT_DET_ID 6
#define SYS_MRL_SENSOR_CHGED_ID 7
#define SYS_PRE_DET_CHGED_ID 8
#define SYS_CMD_CPLED_INT_ID 9
#define APP_INIT_RST_0_ID 11
#define APP_REQ_ENTR_L1_ID 12
#define APP_READY_ENTR_L23_ID 13
#define APP_REQ_EXIT_L1_ID 14
#define DEVICE_TYPE_EP (0 << 25)
#define DEVICE_TYPE_LEP (1 << 25)
#define DEVICE_TYPE_RC (4 << 25)
#define SYS_INT_ID 29
#define MISCTRL_EN_ID 30
#define REG_TRANSLATION_ENABLE 31
/* CR1 ID */
#define APPS_PM_XMT_TURNOFF_ID 2
#define APPS_PM_XMT_PME_ID 5
/* CR3 ID */
#define XMLH_LTSSM_STATE_DETECT_QUIET 0x00
#define XMLH_LTSSM_STATE_DETECT_ACT 0x01
#define XMLH_LTSSM_STATE_POLL_ACTIVE 0x02
#define XMLH_LTSSM_STATE_POLL_COMPLIANCE 0x03
#define XMLH_LTSSM_STATE_POLL_CONFIG 0x04
#define XMLH_LTSSM_STATE_PRE_DETECT_QUIET 0x05
#define XMLH_LTSSM_STATE_DETECT_WAIT 0x06
#define XMLH_LTSSM_STATE_CFG_LINKWD_START 0x07
#define XMLH_LTSSM_STATE_CFG_LINKWD_ACEPT 0x08
#define XMLH_LTSSM_STATE_CFG_LANENUM_WAIT 0x09
#define XMLH_LTSSM_STATE_CFG_LANENUM_ACEPT 0x0A
#define XMLH_LTSSM_STATE_CFG_COMPLETE 0x0B
#define XMLH_LTSSM_STATE_CFG_IDLE 0x0C
#define XMLH_LTSSM_STATE_RCVRY_LOCK 0x0D
#define XMLH_LTSSM_STATE_RCVRY_SPEED 0x0E
#define XMLH_LTSSM_STATE_RCVRY_RCVRCFG 0x0F
#define XMLH_LTSSM_STATE_RCVRY_IDLE 0x10
#define XMLH_LTSSM_STATE_L0 0x11
#define XMLH_LTSSM_STATE_L0S 0x12
#define XMLH_LTSSM_STATE_L123_SEND_EIDLE 0x13
#define XMLH_LTSSM_STATE_L1_IDLE 0x14
#define XMLH_LTSSM_STATE_L2_IDLE 0x15
#define XMLH_LTSSM_STATE_L2_WAKE 0x16
#define XMLH_LTSSM_STATE_DISABLED_ENTRY 0x17
#define XMLH_LTSSM_STATE_DISABLED_IDLE 0x18
#define XMLH_LTSSM_STATE_DISABLED 0x19
#define XMLH_LTSSM_STATE_LPBK_ENTRY 0x1A
#define XMLH_LTSSM_STATE_LPBK_ACTIVE 0x1B
#define XMLH_LTSSM_STATE_LPBK_EXIT 0x1C
#define XMLH_LTSSM_STATE_LPBK_EXIT_TIMEOUT 0x1D
#define XMLH_LTSSM_STATE_HOT_RESET_ENTRY 0x1E
#define XMLH_LTSSM_STATE_HOT_RESET 0x1F
#define XMLH_LTSSM_STATE_MASK 0x3F
#define XMLH_LINK_UP (1 << 6)
/* CR4 ID */
#define CFG_MSI_EN_ID 18
/* CR6 */
#define INTA_CTRL_INT (1 << 7)
#define INTB_CTRL_INT (1 << 8)
#define INTC_CTRL_INT (1 << 9)
#define INTD_CTRL_INT (1 << 10)
#define MSI_CTRL_INT (1 << 26)
/* CR19 ID */
#define VEN_MSI_REQ_ID 11
#define VEN_MSI_FUN_NUM_ID 8
#define VEN_MSI_TC_ID 5
#define VEN_MSI_VECTOR_ID 0
#define VEN_MSI_REQ_EN ((u32)0x1 << VEN_MSI_REQ_ID)
#define VEN_MSI_FUN_NUM_MASK ((u32)0x7 << VEN_MSI_FUN_NUM_ID)
#define VEN_MSI_TC_MASK ((u32)0x7 << VEN_MSI_TC_ID)
#define VEN_MSI_VECTOR_MASK ((u32)0x1F << VEN_MSI_VECTOR_ID)
#define EXP_CAP_ID_OFFSET 0x70
#define to_spear13xx_pcie(x) container_of(x, struct spear13xx_pcie, pp)
static int spear13xx_pcie_establish_link(struct pcie_port *pp)
{
u32 val;
int count = 0;
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp);
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
u32 exp_cap_off = EXP_CAP_ID_OFFSET;
if (dw_pcie_link_up(pp)) {
dev_err(pp->dev, "link already up\n");
return 0;
}
dw_pcie_setup_rc(pp);
/*
* this controller support only 128 bytes read size, however its
* default value in capability register is 512 bytes. So force
* it to 128 here.
*/
dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_DEVCTL, 4, &val);
val &= ~PCI_EXP_DEVCTL_READRQ;
dw_pcie_cfg_write(pp->dbi_base, exp_cap_off + PCI_EXP_DEVCTL, 4, val);
dw_pcie_cfg_write(pp->dbi_base, PCI_VENDOR_ID, 2, 0x104A);
dw_pcie_cfg_write(pp->dbi_base, PCI_DEVICE_ID, 2, 0xCD80);
/*
* if is_gen1 is set then handle it, so that some buggy card
* also works
*/
if (spear13xx_pcie->is_gen1) {
dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_LNKCAP, 4,
&val);
if ((val & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) {
val &= ~((u32)PCI_EXP_LNKCAP_SLS);
val |= PCI_EXP_LNKCAP_SLS_2_5GB;
dw_pcie_cfg_write(pp->dbi_base, exp_cap_off +
PCI_EXP_LNKCAP, 4, val);
}
dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_LNKCTL2, 4,
&val);
if ((val & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) {
val &= ~((u32)PCI_EXP_LNKCAP_SLS);
val |= PCI_EXP_LNKCAP_SLS_2_5GB;
dw_pcie_cfg_write(pp->dbi_base, exp_cap_off +
PCI_EXP_LNKCTL2, 4, val);
}
}
/* enable ltssm */
writel(DEVICE_TYPE_RC | (1 << MISCTRL_EN_ID)
| (1 << APP_LTSSM_ENABLE_ID)
| ((u32)1 << REG_TRANSLATION_ENABLE),
&app_reg->app_ctrl_0);
/* check if the link is up or not */
while (!dw_pcie_link_up(pp)) {
mdelay(100);
count++;
if (count == 10) {
dev_err(pp->dev, "link Fail\n");
return -EINVAL;
}
}
dev_info(pp->dev, "link up\n");
return 0;
}
static irqreturn_t spear13xx_pcie_irq_handler(int irq, void *arg)
{
struct pcie_port *pp = arg;
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp);
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
unsigned int status;
status = readl(&app_reg->int_sts);
if (status & MSI_CTRL_INT) {
if (!IS_ENABLED(CONFIG_PCI_MSI))
BUG();
dw_handle_msi_irq(pp);
}
writel(status, &app_reg->int_clr);
return IRQ_HANDLED;
}
static void spear13xx_pcie_enable_interrupts(struct pcie_port *pp)
{
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp);
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
/* Enable MSI interrupt */
if (IS_ENABLED(CONFIG_PCI_MSI)) {
dw_pcie_msi_init(pp);
writel(readl(&app_reg->int_mask) |
MSI_CTRL_INT, &app_reg->int_mask);
}
}
static int spear13xx_pcie_link_up(struct pcie_port *pp)
{
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp);
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
if (readl(&app_reg->app_status_1) & XMLH_LINK_UP)
return 1;
return 0;
}
static void spear13xx_pcie_host_init(struct pcie_port *pp)
{
spear13xx_pcie_establish_link(pp);
spear13xx_pcie_enable_interrupts(pp);
}
static struct pcie_host_ops spear13xx_pcie_host_ops = {
.link_up = spear13xx_pcie_link_up,
.host_init = spear13xx_pcie_host_init,
};
static int add_pcie_port(struct pcie_port *pp, struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
int ret;
pp->irq = platform_get_irq(pdev, 0);
if (!pp->irq) {
dev_err(dev, "failed to get irq\n");
return -ENODEV;
}
ret = devm_request_irq(dev, pp->irq, spear13xx_pcie_irq_handler,
IRQF_SHARED, "spear1340-pcie", pp);
if (ret) {
dev_err(dev, "failed to request irq %d\n", pp->irq);
return ret;
}
pp->root_bus_nr = -1;
pp->ops = &spear13xx_pcie_host_ops;
ret = dw_pcie_host_init(pp);
if (ret) {
dev_err(dev, "failed to initialize host\n");
return ret;
}
return 0;
}
static int __init spear13xx_pcie_probe(struct platform_device *pdev)
{
struct spear13xx_pcie *spear13xx_pcie;
struct pcie_port *pp;
struct device *dev = &pdev->dev;
struct device_node *np = pdev->dev.of_node;
struct resource *dbi_base;
int ret;
spear13xx_pcie = devm_kzalloc(dev, sizeof(*spear13xx_pcie), GFP_KERNEL);
if (!spear13xx_pcie) {
dev_err(dev, "no memory for SPEAr13xx pcie\n");
return -ENOMEM;
}
spear13xx_pcie->phy = devm_phy_get(dev, "pcie-phy");
if (IS_ERR(spear13xx_pcie->phy)) {
ret = PTR_ERR(spear13xx_pcie->phy);
if (ret == -EPROBE_DEFER)
dev_info(dev, "probe deferred\n");
else
dev_err(dev, "couldn't get pcie-phy\n");
return ret;
}
phy_init(spear13xx_pcie->phy);
spear13xx_pcie->clk = devm_clk_get(dev, NULL);
if (IS_ERR(spear13xx_pcie->clk)) {
dev_err(dev, "couldn't get clk for pcie\n");
return PTR_ERR(spear13xx_pcie->clk);
}
ret = clk_prepare_enable(spear13xx_pcie->clk);
if (ret) {
dev_err(dev, "couldn't enable clk for pcie\n");
return ret;
}
pp = &spear13xx_pcie->pp;
pp->dev = dev;
dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pp->dbi_base = devm_ioremap_resource(dev, dbi_base);
if (IS_ERR(pp->dbi_base)) {
dev_err(dev, "couldn't remap dbi base %p\n", dbi_base);
ret = PTR_ERR(pp->dbi_base);
goto fail_clk;
}
spear13xx_pcie->app_base = pp->dbi_base + 0x2000;
if (of_property_read_bool(np, "st,pcie-is-gen1"))
spear13xx_pcie->is_gen1 = true;
ret = add_pcie_port(pp, pdev);
if (ret < 0)
goto fail_clk;
platform_set_drvdata(pdev, spear13xx_pcie);
return 0;
fail_clk:
clk_disable_unprepare(spear13xx_pcie->clk);
return ret;
}
static int __exit spear13xx_pcie_remove(struct platform_device *pdev)
{
struct spear13xx_pcie *spear13xx_pcie = platform_get_drvdata(pdev);
clk_disable_unprepare(spear13xx_pcie->clk);
phy_exit(spear13xx_pcie->phy);
return 0;
}
static const struct of_device_id spear13xx_pcie_of_match[] = {
{ .compatible = "st,spear1340-pcie", },
{},
};
MODULE_DEVICE_TABLE(of, spear13xx_pcie_of_match);
static struct platform_driver spear13xx_pcie_driver = {
.probe = spear13xx_pcie_probe,
.remove = spear13xx_pcie_remove,
.driver = {
.name = "spear-pcie",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(spear13xx_pcie_of_match),
},
};
/* SPEAr13xx PCIe driver does not allow module unload */
static int __init pcie_init(void)
{
return platform_driver_register(&spear13xx_pcie_driver);
}
module_init(pcie_init);
MODULE_DESCRIPTION("ST Microelectronics SPEAr13xx PCIe host controller driver");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
MODULE_LICENSE("GPL v2");

12
drivers/phy/Kconfig
View File

@ -178,4 +178,16 @@ config PHY_XGENE
help help
This option enables support for APM X-Gene SoC multi-purpose PHY. This option enables support for APM X-Gene SoC multi-purpose PHY.
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
help
Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
config PHY_ST_SPEAR1340_MIPHY
tristate "ST SPEAR1340-MIPHY driver"
select GENERIC_PHY
help
Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
endmenu endmenu

2
drivers/phy/Makefile
View File

@ -20,3 +20,5 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o

274
drivers/phy/phy-spear1310-miphy.c Normal file
View File

@ -0,0 +1,274 @@
/*
* ST SPEAr1310-miphy driver
*
* Copyright (C) 2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@st.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
/* SPEAr1310 Registers */
#define SPEAR1310_PCIE_SATA_CFG 0x3A4
#define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31)
#define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30)
#define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29)
#define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31)
#define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30)
#define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29)
#define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27)
#define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26)
#define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25)
#define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24)
#define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23)
#define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22)
#define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21)
#define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20)
#define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19)
#define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18)
#define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17)
#define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16)
#define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11)
#define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10)
#define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9)
#define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8)
#define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7)
#define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6)
#define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5)
#define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4)
#define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3)
#define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2)
#define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1)
#define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0)
#define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29)))
#define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \
BIT((x + 29)))
#define SPEAR1310_PCIE_CFG_VAL(x) \
(SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \
SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \
SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \
SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \
SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT)
#define SPEAR1310_SATA_CFG_VAL(x) \
(SPEAR1310_PCIE_SATA##x##_SEL_SATA | \
SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \
SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \
SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \
SPEAR1310_SATA##x##_CFG_TX_CLK_EN)
#define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8
#define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31)
#define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28)
#define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16)
#define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15)
#define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12)
#define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0)
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF)
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16)
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \
(SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \
SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \
SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \
SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60))
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
(SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120))
#define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \
(SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \
SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25))
#define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC
enum spear1310_miphy_mode {
SATA,
PCIE,
};
struct spear1310_miphy_priv {
/* instance id of this phy */
u32 id;
/* phy mode: 0 for SATA 1 for PCIe */
enum spear1310_miphy_mode mode;
/* regmap for any soc specific misc registers */
struct regmap *misc;
/* phy struct pointer */
struct phy *phy;
};
static int spear1310_miphy_pcie_init(struct spear1310_miphy_priv *priv)
{
u32 val;
regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK,
SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE);
switch (priv->id) {
case 0:
val = SPEAR1310_PCIE_CFG_VAL(0);
break;
case 1:
val = SPEAR1310_PCIE_CFG_VAL(1);
break;
case 2:
val = SPEAR1310_PCIE_CFG_VAL(2);
break;
default:
return -EINVAL;
}
regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
SPEAR1310_PCIE_CFG_MASK(priv->id), val);
return 0;
}
static int spear1310_miphy_pcie_exit(struct spear1310_miphy_priv *priv)
{
regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
SPEAR1310_PCIE_CFG_MASK(priv->id), 0);
regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0);
return 0;
}
static int spear1310_miphy_init(struct phy *phy)
{
struct spear1310_miphy_priv *priv = phy_get_drvdata(phy);
int ret = 0;
if (priv->mode == PCIE)
ret = spear1310_miphy_pcie_init(priv);
return ret;
}
static int spear1310_miphy_exit(struct phy *phy)
{
struct spear1310_miphy_priv *priv = phy_get_drvdata(phy);
int ret = 0;
if (priv->mode == PCIE)
ret = spear1310_miphy_pcie_exit(priv);
return ret;
}
static const struct of_device_id spear1310_miphy_of_match[] = {
{ .compatible = "st,spear1310-miphy" },
{ },
};
MODULE_DEVICE_TABLE(of, spear1310_miphy_of_match);
static struct phy_ops spear1310_miphy_ops = {
.init = spear1310_miphy_init,
.exit = spear1310_miphy_exit,
.owner = THIS_MODULE,
};
static struct phy *spear1310_miphy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct spear1310_miphy_priv *priv = dev_get_drvdata(dev);
if (args->args_count < 1) {
dev_err(dev, "DT did not pass correct no of args\n");
return NULL;
}
priv->mode = args->args[0];
if (priv->mode != SATA && priv->mode != PCIE) {
dev_err(dev, "DT did not pass correct phy mode\n");
return NULL;
}
return priv->phy;
}
static int spear1310_miphy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct spear1310_miphy_priv *priv;
struct phy_provider *phy_provider;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(dev, "can't alloc spear1310_miphy private date memory\n");
return -ENOMEM;
}
priv->misc =
syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
if (IS_ERR(priv->misc)) {
dev_err(dev, "failed to find misc regmap\n");
return PTR_ERR(priv->misc);
}
if (of_property_read_u32(dev->of_node, "phy-id", &priv->id)) {
dev_err(dev, "failed to find phy id\n");
return -EINVAL;
}
priv->phy = devm_phy_create(dev, &spear1310_miphy_ops, NULL);
if (IS_ERR(priv->phy)) {
dev_err(dev, "failed to create SATA PCIe PHY\n");
return PTR_ERR(priv->phy);
}
dev_set_drvdata(dev, priv);
phy_set_drvdata(priv->phy, priv);
phy_provider =
devm_of_phy_provider_register(dev, spear1310_miphy_xlate);
if (IS_ERR(phy_provider)) {
dev_err(dev, "failed to register phy provider\n");
return PTR_ERR(phy_provider);
}
return 0;
}
static struct platform_driver spear1310_miphy_driver = {
.probe = spear1310_miphy_probe,
.driver = {
.name = "spear1310-miphy",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(spear1310_miphy_of_match),
},
};
static int __init spear1310_miphy_phy_init(void)
{
return platform_driver_register(&spear1310_miphy_driver);
}
module_init(spear1310_miphy_phy_init);
static void __exit spear1310_miphy_phy_exit(void)
{
platform_driver_unregister(&spear1310_miphy_driver);
}
module_exit(spear1310_miphy_phy_exit);
MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
MODULE_LICENSE("GPL v2");

307
drivers/phy/phy-spear1340-miphy.c Normal file
View File

@ -0,0 +1,307 @@
/*
* ST spear1340-miphy driver
*
* Copyright (C) 2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@st.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
/* SPEAr1340 Registers */
/* Power Management Registers */
#define SPEAR1340_PCM_CFG 0x100
#define SPEAR1340_PCM_CFG_SATA_POWER_EN BIT(11)
#define SPEAR1340_PCM_WKUP_CFG 0x104
#define SPEAR1340_SWITCH_CTR 0x108
#define SPEAR1340_PERIP1_SW_RST 0x318
#define SPEAR1340_PERIP1_SW_RSATA BIT(12)
#define SPEAR1340_PERIP2_SW_RST 0x31C
#define SPEAR1340_PERIP3_SW_RST 0x320
/* PCIE - SATA configuration registers */
#define SPEAR1340_PCIE_SATA_CFG 0x424
/* PCIE CFG MASks */
#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT BIT(11)
#define SPEAR1340_PCIE_CFG_POWERUP_RESET BIT(10)
#define SPEAR1340_PCIE_CFG_CORE_CLK_EN BIT(9)
#define SPEAR1340_PCIE_CFG_AUX_CLK_EN BIT(8)
#define SPEAR1340_SATA_CFG_TX_CLK_EN BIT(4)
#define SPEAR1340_SATA_CFG_RX_CLK_EN BIT(3)
#define SPEAR1340_SATA_CFG_POWERUP_RESET BIT(2)
#define SPEAR1340_SATA_CFG_PM_CLK_EN BIT(1)
#define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
#define SPEAR1340_PCIE_SATA_SEL_SATA (1)
#define SPEAR1340_PCIE_SATA_CFG_MASK 0xF1F
#define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
SPEAR1340_PCIE_CFG_POWERUP_RESET | \
SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
#define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
SPEAR1340_SATA_CFG_PM_CLK_EN | \
SPEAR1340_SATA_CFG_POWERUP_RESET | \
SPEAR1340_SATA_CFG_RX_CLK_EN | \
SPEAR1340_SATA_CFG_TX_CLK_EN)
#define SPEAR1340_PCIE_MIPHY_CFG 0x428
#define SPEAR1340_MIPHY_OSC_BYPASS_EXT BIT(31)
#define SPEAR1340_MIPHY_CLK_REF_DIV2 BIT(27)
#define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
#define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
#define SPEAR1340_PCIE_MIPHY_CFG_MASK 0xF80000FF
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
SPEAR1340_MIPHY_CLK_REF_DIV2 | \
SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
enum spear1340_miphy_mode {
SATA,
PCIE,
};
struct spear1340_miphy_priv {
/* phy mode: 0 for SATA 1 for PCIe */
enum spear1340_miphy_mode mode;
/* regmap for any soc specific misc registers */
struct regmap *misc;
/* phy struct pointer */
struct phy *phy;
};
static int spear1340_miphy_sata_init(struct spear1340_miphy_priv *priv)
{
regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
SPEAR1340_PCIE_SATA_CFG_MASK,
SPEAR1340_SATA_CFG_VAL);
regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
SPEAR1340_PCIE_MIPHY_CFG_MASK,
SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK);
/* Switch on sata power domain */
regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG,
SPEAR1340_PCM_CFG_SATA_POWER_EN,
SPEAR1340_PCM_CFG_SATA_POWER_EN);
/* Wait for SATA power domain on */
msleep(20);
/* Disable PCIE SATA Controller reset */
regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST,
SPEAR1340_PERIP1_SW_RSATA, 0);
/* Wait for SATA reset de-assert completion */
msleep(20);
return 0;
}
static int spear1340_miphy_sata_exit(struct spear1340_miphy_priv *priv)
{
regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
SPEAR1340_PCIE_SATA_CFG_MASK, 0);
regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);
/* Enable PCIE SATA Controller reset */
regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST,
SPEAR1340_PERIP1_SW_RSATA,
SPEAR1340_PERIP1_SW_RSATA);
/* Wait for SATA power domain off */
msleep(20);
/* Switch off sata power domain */
regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG,
SPEAR1340_PCM_CFG_SATA_POWER_EN, 0);
/* Wait for SATA reset assert completion */
msleep(20);
return 0;
}
static int spear1340_miphy_pcie_init(struct spear1340_miphy_priv *priv)
{
regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
SPEAR1340_PCIE_MIPHY_CFG_MASK,
SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE);
regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
SPEAR1340_PCIE_SATA_CFG_MASK,
SPEAR1340_PCIE_CFG_VAL);
return 0;
}
static int spear1340_miphy_pcie_exit(struct spear1340_miphy_priv *priv)
{
regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);
regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
SPEAR1340_PCIE_SATA_CFG_MASK, 0);
return 0;
}
static int spear1340_miphy_init(struct phy *phy)
{
struct spear1340_miphy_priv *priv = phy_get_drvdata(phy);
int ret = 0;
if (priv->mode == SATA)
ret = spear1340_miphy_sata_init(priv);
else if (priv->mode == PCIE)
ret = spear1340_miphy_pcie_init(priv);
return ret;
}
static int spear1340_miphy_exit(struct phy *phy)
{
struct spear1340_miphy_priv *priv = phy_get_drvdata(phy);
int ret = 0;
if (priv->mode == SATA)
ret = spear1340_miphy_sata_exit(priv);
else if (priv->mode == PCIE)
ret = spear1340_miphy_pcie_exit(priv);
return ret;
}
static const struct of_device_id spear1340_miphy_of_match[] = {
{ .compatible = "st,spear1340-miphy" },
{ },
};
MODULE_DEVICE_TABLE(of, spear1340_miphy_of_match);
static struct phy_ops spear1340_miphy_ops = {
.init = spear1340_miphy_init,
.exit = spear1340_miphy_exit,
.owner = THIS_MODULE,
};
#ifdef CONFIG_PM_SLEEP
static int spear1340_miphy_suspend(struct device *dev)
{
struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
int ret = 0;
if (priv->mode == SATA)
ret = spear1340_miphy_sata_exit(priv);
return ret;
}
static int spear1340_miphy_resume(struct device *dev)
{
struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
int ret = 0;
if (priv->mode == SATA)
ret = spear1340_miphy_sata_init(priv);
return ret;
}
#endif
static SIMPLE_DEV_PM_OPS(spear1340_miphy_pm_ops, spear1340_miphy_suspend,
spear1340_miphy_resume);
static struct phy *spear1340_miphy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
if (args->args_count < 1) {
dev_err(dev, "DT did not pass correct no of args\n");
return NULL;
}
priv->mode = args->args[0];
if (priv->mode != SATA && priv->mode != PCIE) {
dev_err(dev, "DT did not pass correct phy mode\n");
return NULL;
}
return priv->phy;
}
static int spear1340_miphy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct spear1340_miphy_priv *priv;
struct phy_provider *phy_provider;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(dev, "can't alloc spear1340_miphy private date memory\n");
return -ENOMEM;
}
priv->misc =
syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
if (IS_ERR(priv->misc)) {
dev_err(dev, "failed to find misc regmap\n");
return PTR_ERR(priv->misc);
}
priv->phy = devm_phy_create(dev, &spear1340_miphy_ops, NULL);
if (IS_ERR(priv->phy)) {
dev_err(dev, "failed to create SATA PCIe PHY\n");
return PTR_ERR(priv->phy);
}
dev_set_drvdata(dev, priv);
phy_set_drvdata(priv->phy, priv);
phy_provider =
devm_of_phy_provider_register(dev, spear1340_miphy_xlate);
if (IS_ERR(phy_provider)) {
dev_err(dev, "failed to register phy provider\n");
return PTR_ERR(phy_provider);
}
return 0;
}
static struct platform_driver spear1340_miphy_driver = {
.probe = spear1340_miphy_probe,
.driver = {
.name = "spear1340-miphy",
.owner = THIS_MODULE,
.pm = &spear1340_miphy_pm_ops,
.of_match_table = of_match_ptr(spear1340_miphy_of_match),
},
};
static int __init spear1340_miphy_phy_init(void)
{
return platform_driver_register(&spear1340_miphy_driver);
}
module_init(spear1340_miphy_phy_init);
static void __exit spear1340_miphy_phy_exit(void)
{
platform_driver_unregister(&spear1340_miphy_driver);
}
module_exit(spear1340_miphy_phy_exit);
MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
MODULE_LICENSE("GPL v2");