openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

staging: et131x: move et1310_phy.h contents into et131x.h 

Move et1310_phy.h register defines into et131x.h and delete
et1310_phy.h

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Mark Einon 2011-10-20 01:18:34 +01:00 committed by Greg Kroah-Hartman
parent 01df6aa263
commit 2b2b9554de
3 changed files with 227 additions and 291 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

290
drivers/staging/et131x/et1310_phy.h
View File

@ -1,290 +0,0 @@
/*
* Agere Systems Inc.
* 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
*
* Copyright © 2005 Agere Systems Inc.
* All rights reserved.
* http://www.agere.com
*
* Copyright (c) 2011 Mark Einon <mark.einon@gmail.com>
*
*------------------------------------------------------------------------------
*
* et1310_phy.h - Defines, structs, enums, prototypes, etc. pertaining to the
* PHY.
*
*------------------------------------------------------------------------------
*
* SOFTWARE LICENSE
*
* This software is provided subject to the following terms and conditions,
* which you should read carefully before using the software. Using this
* software indicates your acceptance of these terms and conditions. If you do
* not agree with these terms and conditions, do not use the software.
*
* Copyright © 2005 Agere Systems Inc.
* All rights reserved.
*
* Redistribution and use in source or binary forms, with or without
* modifications, are permitted provided that the following conditions are met:
*
* . Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following Disclaimer as comments in the code as
* well as in the documentation and/or other materials provided with the
* distribution.
*
* . Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following Disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* . Neither the name of Agere Systems Inc. nor the names of the contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Disclaimer
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
* RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*/
#ifndef _ET1310_PHY_H_
#define _ET1310_PHY_H_
/*
* Defines for generic MII registers 0x00 -> 0x0F can be found in
* include/linux/mii.h
*/
/* some defines for modem registers that seem to be 'reserved' */
#define PHY_INDEX_REG 0x10
#define PHY_DATA_REG 0x11
#define PHY_MPHY_CONTROL_REG 0x12
/* defines for specified registers */
#define PHY_LOOPBACK_CONTROL 0x13 /* TRU_VMI_LOOPBACK_CONTROL_1_REG 19 */
/* TRU_VMI_LOOPBACK_CONTROL_2_REG 20 */
#define PHY_REGISTER_MGMT_CONTROL 0x15 /* TRU_VMI_MI_SEQ_CONTROL_REG 21 */
#define PHY_CONFIG 0x16 /* TRU_VMI_CONFIGURATION_REG 22 */
#define PHY_PHY_CONTROL 0x17 /* TRU_VMI_PHY_CONTROL_REG 23 */
#define PHY_INTERRUPT_MASK 0x18 /* TRU_VMI_INTERRUPT_MASK_REG 24 */
#define PHY_INTERRUPT_STATUS 0x19 /* TRU_VMI_INTERRUPT_STATUS_REG 25 */
#define PHY_PHY_STATUS 0x1A /* TRU_VMI_PHY_STATUS_REG 26 */
#define PHY_LED_1 0x1B /* TRU_VMI_LED_CONTROL_1_REG 27 */
#define PHY_LED_2 0x1C /* TRU_VMI_LED_CONTROL_2_REG 28 */
/* TRU_VMI_LINK_CONTROL_REG 29 */
/* TRU_VMI_TIMING_CONTROL_REG */
/* MI Register 10: Gigabit basic mode status reg(Reg 0x0A) */
#define ET_1000BT_MSTR_SLV 0x4000
/* MI Register 16 - 18: Reserved Reg(0x10-0x12) */
/* MI Register 19: Loopback Control Reg(0x13)
* 15: mii_en
* 14: pcs_en
* 13: pmd_en
* 12: all_digital_en
* 11: replica_en
* 10: line_driver_en
* 9-0: reserved
*/
/* MI Register 20: Reserved Reg(0x14) */
/* MI Register 21: Management Interface Control Reg(0x15)
* 15-11: reserved
* 10-4: mi_error_count
* 3: reserved
* 2: ignore_10g_fr
* 1: reserved
* 0: preamble_supress_en
*/
/* MI Register 22: PHY Configuration Reg(0x16)
* 15: crs_tx_en
* 14: reserved
* 13-12: tx_fifo_depth
* 11-10: speed_downshift
* 9: pbi_detect
* 8: tbi_rate
* 7: alternate_np
* 6: group_mdio_en
* 5: tx_clock_en
* 4: sys_clock_en
* 3: reserved
* 2-0: mac_if_mode
*/
#define ET_PHY_CONFIG_TX_FIFO_DEPTH 0x3000
#define ET_PHY_CONFIG_FIFO_DEPTH_8 0x0000
#define ET_PHY_CONFIG_FIFO_DEPTH_16 0x1000
#define ET_PHY_CONFIG_FIFO_DEPTH_32 0x2000
#define ET_PHY_CONFIG_FIFO_DEPTH_64 0x3000
/* MI Register 23: PHY CONTROL Reg(0x17)
* 15: reserved
* 14: tdr_en
* 13: reserved
* 12-11: downshift_attempts
* 10-6: reserved
* 5: jabber_10baseT
* 4: sqe_10baseT
* 3: tp_loopback_10baseT
* 2: preamble_gen_en
* 1: reserved
* 0: force_int
*/
/* MI Register 24: Interrupt Mask Reg(0x18)
* 15-10: reserved
* 9: mdio_sync_lost
* 8: autoneg_status
* 7: hi_bit_err
* 6: np_rx
* 5: err_counter_full
* 4: fifo_over_underflow
* 3: rx_status
* 2: link_status
* 1: automatic_speed
* 0: int_en
*/
#define ET_PHY_INT_MASK_AUTONEGSTAT 0x0100
#define ET_PHY_INT_MASK_LINKSTAT 0x0004
#define ET_PHY_INT_MASK_ENABLE 0x0001
/* MI Register 25: Interrupt Status Reg(0x19)
* 15-10: reserved
* 9: mdio_sync_lost
* 8: autoneg_status
* 7: hi_bit_err
* 6: np_rx
* 5: err_counter_full
* 4: fifo_over_underflow
* 3: rx_status
* 2: link_status
* 1: automatic_speed
* 0: int_en
*/
/* MI Register 26: PHY Status Reg(0x1A)
* 15: reserved
* 14-13: autoneg_fault
* 12: autoneg_status
* 11: mdi_x_status
* 10: polarity_status
* 9-8: speed_status
* 7: duplex_status
* 6: link_status
* 5: tx_status
* 4: rx_status
* 3: collision_status
* 2: autoneg_en
* 1: pause_en
* 0: asymmetric_dir
*/
#define ET_PHY_AUTONEG_STATUS 0x1000
#define ET_PHY_POLARITY_STATUS 0x0400
#define ET_PHY_SPEED_STATUS 0x0300
#define ET_PHY_DUPLEX_STATUS 0x0080
#define ET_PHY_LSTATUS 0x0040
#define ET_PHY_AUTONEG_ENABLE 0x0020
/* MI Register 27: LED Control Reg 1(0x1B)
* 15-14: reserved
* 13-12: led_dup_indicate
* 11-10: led_10baseT
* 9-8: led_collision
* 7-4: reserved
* 3-2: pulse_dur
* 1: pulse_stretch1
* 0: pulse_stretch0
*/
/* MI Register 28: LED Control Reg 2(0x1C)
* 15-12: led_link
* 11-8: led_tx_rx
* 7-4: led_100BaseTX
* 3-0: led_1000BaseT
*/
#define ET_LED2_LED_LINK 0xF000
#define ET_LED2_LED_TXRX 0x0F00
#define ET_LED2_LED_100TX 0x00F0
#define ET_LED2_LED_1000T 0x000F
/* defines for LED control reg 2 values */
#define LED_VAL_1000BT 0x0
#define LED_VAL_100BTX 0x1
#define LED_VAL_10BT 0x2
#define LED_VAL_1000BT_100BTX 0x3 /* 1000BT on, 100BTX blink */
#define LED_VAL_LINKON 0x4
#define LED_VAL_TX 0x5
#define LED_VAL_RX 0x6
#define LED_VAL_TXRX 0x7 /* TX or RX */
#define LED_VAL_DUPLEXFULL 0x8
#define LED_VAL_COLLISION 0x9
#define LED_VAL_LINKON_ACTIVE 0xA /* Link on, activity blink */
#define LED_VAL_LINKON_RECV 0xB /* Link on, receive blink */
#define LED_VAL_DUPLEXFULL_COLLISION 0xC /* Duplex on, collision blink */
#define LED_VAL_BLINK 0xD
#define LED_VAL_ON 0xE
#define LED_VAL_OFF 0xF
#define LED_LINK_SHIFT 12
#define LED_TXRX_SHIFT 8
#define LED_100TX_SHIFT 4
/* MI Register 29 - 31: Reserved Reg(0x1D - 0x1E) */
/* Defines for PHY access routines */
/* Define bit operation flags */
#define TRUEPHY_BIT_CLEAR 0
#define TRUEPHY_BIT_SET 1
#define TRUEPHY_BIT_READ 2
/* Define read/write operation flags */
#ifndef TRUEPHY_READ
#define TRUEPHY_READ 0
#define TRUEPHY_WRITE 1
#define TRUEPHY_MASK 2
#endif
/* Define master/slave configuration values */
#define TRUEPHY_CFG_SLAVE 0
#define TRUEPHY_CFG_MASTER 1
/* Define MDI/MDI-X settings */
#define TRUEPHY_MDI 0
#define TRUEPHY_MDIX 1
#define TRUEPHY_AUTO_MDI_MDIX 2
/* Define 10Base-T link polarities */
#define TRUEPHY_POLARITY_NORMAL 0
#define TRUEPHY_POLARITY_INVERTED 1
/* Define auto-negotiation results */
#define TRUEPHY_ANEG_NOT_COMPLETE 0
#define TRUEPHY_ANEG_COMPLETE 1
#define TRUEPHY_ANEG_DISABLED 2
/* Define duplex advertisement flags */
#define TRUEPHY_ADV_DUPLEX_NONE 0x00
#define TRUEPHY_ADV_DUPLEX_FULL 0x01
#define TRUEPHY_ADV_DUPLEX_HALF 0x02
#define TRUEPHY_ADV_DUPLEX_BOTH \
(TRUEPHY_ADV_DUPLEX_FULL | TRUEPHY_ADV_DUPLEX_HALF)
#endif /* _ET1310_PHY_H_ */

1
drivers/staging/et131x/et131x.c
View File

@ -83,7 +83,6 @@
#include <linux/random.h>
#include <linux/phy.h>
#include "et1310_phy.h"
#include "et131x_adapter.h"
#include "et1310_tx.h"
#include "et1310_rx.h"

227
drivers/staging/et131x/et131x.h
View File

@ -1447,3 +1447,230 @@ struct address_map {
u8 unused_exp_rom[4096]; /* MGS-size TBD */
u8 unused__[524288]; /* unused section of address map */
};
/*
* Defines for generic MII registers 0x00 -> 0x0F can be found in
* include/linux/mii.h
*/
/* some defines for modem registers that seem to be 'reserved' */
#define PHY_INDEX_REG 0x10
#define PHY_DATA_REG 0x11
#define PHY_MPHY_CONTROL_REG 0x12
/* defines for specified registers */
#define PHY_LOOPBACK_CONTROL 0x13 /* TRU_VMI_LOOPBACK_CONTROL_1_REG 19 */
/* TRU_VMI_LOOPBACK_CONTROL_2_REG 20 */
#define PHY_REGISTER_MGMT_CONTROL 0x15 /* TRU_VMI_MI_SEQ_CONTROL_REG 21 */
#define PHY_CONFIG 0x16 /* TRU_VMI_CONFIGURATION_REG 22 */
#define PHY_PHY_CONTROL 0x17 /* TRU_VMI_PHY_CONTROL_REG 23 */
#define PHY_INTERRUPT_MASK 0x18 /* TRU_VMI_INTERRUPT_MASK_REG 24 */
#define PHY_INTERRUPT_STATUS 0x19 /* TRU_VMI_INTERRUPT_STATUS_REG 25 */
#define PHY_PHY_STATUS 0x1A /* TRU_VMI_PHY_STATUS_REG 26 */
#define PHY_LED_1 0x1B /* TRU_VMI_LED_CONTROL_1_REG 27 */
#define PHY_LED_2 0x1C /* TRU_VMI_LED_CONTROL_2_REG 28 */
/* TRU_VMI_LINK_CONTROL_REG 29 */
/* TRU_VMI_TIMING_CONTROL_REG */
/* MI Register 10: Gigabit basic mode status reg(Reg 0x0A) */
#define ET_1000BT_MSTR_SLV 0x4000
/* MI Register 16 - 18: Reserved Reg(0x10-0x12) */
/* MI Register 19: Loopback Control Reg(0x13)
* 15: mii_en
* 14: pcs_en
* 13: pmd_en
* 12: all_digital_en
* 11: replica_en
* 10: line_driver_en
* 9-0: reserved
*/
/* MI Register 20: Reserved Reg(0x14) */
/* MI Register 21: Management Interface Control Reg(0x15)
* 15-11: reserved
* 10-4: mi_error_count
* 3: reserved
* 2: ignore_10g_fr
* 1: reserved
* 0: preamble_supress_en
*/
/* MI Register 22: PHY Configuration Reg(0x16)
* 15: crs_tx_en
* 14: reserved
* 13-12: tx_fifo_depth
* 11-10: speed_downshift
* 9: pbi_detect
* 8: tbi_rate
* 7: alternate_np
* 6: group_mdio_en
* 5: tx_clock_en
* 4: sys_clock_en
* 3: reserved
* 2-0: mac_if_mode
*/
#define ET_PHY_CONFIG_TX_FIFO_DEPTH 0x3000
#define ET_PHY_CONFIG_FIFO_DEPTH_8 0x0000
#define ET_PHY_CONFIG_FIFO_DEPTH_16 0x1000
#define ET_PHY_CONFIG_FIFO_DEPTH_32 0x2000
#define ET_PHY_CONFIG_FIFO_DEPTH_64 0x3000
/* MI Register 23: PHY CONTROL Reg(0x17)
* 15: reserved
* 14: tdr_en
* 13: reserved
* 12-11: downshift_attempts
* 10-6: reserved
* 5: jabber_10baseT
* 4: sqe_10baseT
* 3: tp_loopback_10baseT
* 2: preamble_gen_en
* 1: reserved
* 0: force_int
*/
/* MI Register 24: Interrupt Mask Reg(0x18)
* 15-10: reserved
* 9: mdio_sync_lost
* 8: autoneg_status
* 7: hi_bit_err
* 6: np_rx
* 5: err_counter_full
* 4: fifo_over_underflow
* 3: rx_status
* 2: link_status
* 1: automatic_speed
* 0: int_en
*/
#define ET_PHY_INT_MASK_AUTONEGSTAT 0x0100
#define ET_PHY_INT_MASK_LINKSTAT 0x0004
#define ET_PHY_INT_MASK_ENABLE 0x0001
/* MI Register 25: Interrupt Status Reg(0x19)
* 15-10: reserved
* 9: mdio_sync_lost
* 8: autoneg_status
* 7: hi_bit_err
* 6: np_rx
* 5: err_counter_full
* 4: fifo_over_underflow
* 3: rx_status
* 2: link_status
* 1: automatic_speed
* 0: int_en
*/
/* MI Register 26: PHY Status Reg(0x1A)
* 15: reserved
* 14-13: autoneg_fault
* 12: autoneg_status
* 11: mdi_x_status
* 10: polarity_status
* 9-8: speed_status
* 7: duplex_status
* 6: link_status
* 5: tx_status
* 4: rx_status
* 3: collision_status
* 2: autoneg_en
* 1: pause_en
* 0: asymmetric_dir
*/
#define ET_PHY_AUTONEG_STATUS 0x1000
#define ET_PHY_POLARITY_STATUS 0x0400
#define ET_PHY_SPEED_STATUS 0x0300
#define ET_PHY_DUPLEX_STATUS 0x0080
#define ET_PHY_LSTATUS 0x0040
#define ET_PHY_AUTONEG_ENABLE 0x0020
/* MI Register 27: LED Control Reg 1(0x1B)
* 15-14: reserved
* 13-12: led_dup_indicate
* 11-10: led_10baseT
* 9-8: led_collision
* 7-4: reserved
* 3-2: pulse_dur
* 1: pulse_stretch1
* 0: pulse_stretch0
*/
/* MI Register 28: LED Control Reg 2(0x1C)
* 15-12: led_link
* 11-8: led_tx_rx
* 7-4: led_100BaseTX
* 3-0: led_1000BaseT
*/
#define ET_LED2_LED_LINK 0xF000
#define ET_LED2_LED_TXRX 0x0F00
#define ET_LED2_LED_100TX 0x00F0
#define ET_LED2_LED_1000T 0x000F
/* defines for LED control reg 2 values */
#define LED_VAL_1000BT 0x0
#define LED_VAL_100BTX 0x1
#define LED_VAL_10BT 0x2
#define LED_VAL_1000BT_100BTX 0x3 /* 1000BT on, 100BTX blink */
#define LED_VAL_LINKON 0x4
#define LED_VAL_TX 0x5
#define LED_VAL_RX 0x6
#define LED_VAL_TXRX 0x7 /* TX or RX */
#define LED_VAL_DUPLEXFULL 0x8
#define LED_VAL_COLLISION 0x9
#define LED_VAL_LINKON_ACTIVE 0xA /* Link on, activity blink */
#define LED_VAL_LINKON_RECV 0xB /* Link on, receive blink */
#define LED_VAL_DUPLEXFULL_COLLISION 0xC /* Duplex on, collision blink */
#define LED_VAL_BLINK 0xD
#define LED_VAL_ON 0xE
#define LED_VAL_OFF 0xF
#define LED_LINK_SHIFT 12
#define LED_TXRX_SHIFT 8
#define LED_100TX_SHIFT 4
/* MI Register 29 - 31: Reserved Reg(0x1D - 0x1E) */
/* Defines for PHY access routines */
/* Define bit operation flags */
#define TRUEPHY_BIT_CLEAR 0
#define TRUEPHY_BIT_SET 1
#define TRUEPHY_BIT_READ 2
/* Define read/write operation flags */
#ifndef TRUEPHY_READ
#define TRUEPHY_READ 0
#define TRUEPHY_WRITE 1
#define TRUEPHY_MASK 2
#endif
/* Define master/slave configuration values */
#define TRUEPHY_CFG_SLAVE 0
#define TRUEPHY_CFG_MASTER 1
/* Define MDI/MDI-X settings */
#define TRUEPHY_MDI 0
#define TRUEPHY_MDIX 1
#define TRUEPHY_AUTO_MDI_MDIX 2
/* Define 10Base-T link polarities */
#define TRUEPHY_POLARITY_NORMAL 0
#define TRUEPHY_POLARITY_INVERTED 1
/* Define auto-negotiation results */
#define TRUEPHY_ANEG_NOT_COMPLETE 0
#define TRUEPHY_ANEG_COMPLETE 1
#define TRUEPHY_ANEG_DISABLED 2
/* Define duplex advertisement flags */
#define TRUEPHY_ADV_DUPLEX_NONE 0x00
#define TRUEPHY_ADV_DUPLEX_FULL 0x01
#define TRUEPHY_ADV_DUPLEX_HALF 0x02
#define TRUEPHY_ADV_DUPLEX_BOTH \
(TRUEPHY_ADV_DUPLEX_FULL | TRUEPHY_ADV_DUPLEX_HALF)