mirror of https://gitee.com/openkylin/linux.git
ARM: dts: Add MDM9615 dtsi
In order to support the Qualcomm MDM9615 SoC, add the SoC dtsi. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
This commit is contained in:
Neil Armstrong
Andy Gross
parent
1001354ca3
commit
2c5e596524
|
|
@ -0,0 +1,557 @@
|
||||||
|
/*
|
||||||
|
* Device Tree Source for Qualcomm MDM9615 SoC
|
||||||
|
*
|
||||||
|
* Copyright (C) 2016 BayLibre, SAS.
|
||||||
|
* Author : Neil Armstrong <narmstrong@baylibre.com>
|
||||||
|
*
|
||||||
|
* This file is dual-licensed: you can use it either under the terms
|
||||||
|
* of the GPL or the X11 license, at your option. Note that this dual
|
||||||
|
* licensing only applies to this file, and not this project as a
|
||||||
|
* whole.
|
||||||
|
*
|
||||||
|
* a) This file is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of the
|
||||||
|
* License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This file is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* Or, alternatively,
|
||||||
|
*
|
||||||
|
* b) Permission is hereby granted, free of charge, to any person
|
||||||
|
* obtaining a copy of this software and associated documentation
|
||||||
|
* files (the "Software"), to deal in the Software without
|
||||||
|
* restriction, including without limitation the rights to use,
|
||||||
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||||
|
* sell copies of the Software, and to permit persons to whom the
|
||||||
|
* Software is furnished to do so, subject to the following
|
||||||
|
* conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be
|
||||||
|
* included in all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||||
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||||
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||||
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||||
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||||
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||||
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||||
|
* OTHER DEALINGS IN THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
/include/ "skeleton.dtsi"
|
||||||
|
|
||||||
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||||
|
#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
|
||||||
|
#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
|
||||||
|
#include <dt-bindings/mfd/qcom-rpm.h>
|
||||||
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "Qualcomm MDM9615";
|
||||||
|
compatible = "qcom,mdm9615";
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
|
||||||
|
cpus {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
cpu0: cpu@0 {
|
||||||
|
compatible = "arm,cortex-a5";
|
||||||
|
device_type = "cpu";
|
||||||
|
next-level-cache = <&L2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
cpu-pmu {
|
||||||
|
compatible = "arm,cortex-a5-pmu";
|
||||||
|
interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||||
|
};
|
||||||
|
|
||||||
|
clocks {
|
||||||
|
cxo_board {
|
||||||
|
compatible = "fixed-clock";
|
||||||
|
#clock-cells = <0>;
|
||||||
|
clock-frequency = <19200000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
regulators {
|
||||||
|
vsdcc_fixed: vsdcc-regulator {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "SDCC Power";
|
||||||
|
regulator-min-microvolt = <2700000>;
|
||||||
|
regulator-max-microvolt = <2700000>;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
soc: soc {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges;
|
||||||
|
compatible = "simple-bus";
|
||||||
|
|
||||||
|
L2: l2-cache@2040000 {
|
||||||
|
compatible = "arm,pl310-cache";
|
||||||
|
reg = <0x02040000 0x1000>;
|
||||||
|
arm,data-latency = <2 2 0>;
|
||||||
|
cache-unified;
|
||||||
|
cache-level = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
intc: interrupt-controller@2000000 {
|
||||||
|
compatible = "qcom,msm-qgic2";
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <3>;
|
||||||
|
reg = <0x02000000 0x1000>,
|
||||||
|
<0x02002000 0x1000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
timer@200a000 {
|
||||||
|
compatible = "qcom,kpss-timer", "qcom,msm-timer";
|
||||||
|
interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
|
||||||
|
<GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
|
||||||
|
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
|
||||||
|
reg = <0x0200a000 0x100>;
|
||||||
|
clock-frequency = <27000000>,
|
||||||
|
<32768>;
|
||||||
|
cpu-offset = <0x80000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
msmgpio: pinctrl@800000 {
|
||||||
|
compatible = "qcom,mdm9615-pinctrl";
|
||||||
|
gpio-controller;
|
||||||
|
#gpio-cells = <2>;
|
||||||
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
reg = <0x800000 0x4000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
gcc: clock-controller@900000 {
|
||||||
|
compatible = "qcom,gcc-mdm9615";
|
||||||
|
#clock-cells = <1>;
|
||||||
|
#reset-cells = <1>;
|
||||||
|
reg = <0x900000 0x4000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
lcc: clock-controller@28000000 {
|
||||||
|
compatible = "qcom,lcc-mdm9615";
|
||||||
|
reg = <0x28000000 0x1000>;
|
||||||
|
#clock-cells = <1>;
|
||||||
|
#reset-cells = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
l2cc: clock-controller@2011000 {
|
||||||
|
compatible = "syscon";
|
||||||
|
reg = <0x02011000 0x1000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
rng@1a500000 {
|
||||||
|
compatible = "qcom,prng";
|
||||||
|
reg = <0x1a500000 0x200>;
|
||||||
|
clocks = <&gcc PRNG_CLK>;
|
||||||
|
clock-names = "core";
|
||||||
|
assigned-clocks = <&gcc PRNG_CLK>;
|
||||||
|
assigned-clock-rates = <32000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
gsbi2: gsbi@16100000 {
|
||||||
|
compatible = "qcom,gsbi-v1.0.0";
|
||||||
|
cell-index = <2>;
|
||||||
|
reg = <0x16100000 0x100>;
|
||||||
|
clocks = <&gcc GSBI2_H_CLK>;
|
||||||
|
clock-names = "iface";
|
||||||
|
status = "disabled";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges;
|
||||||
|
|
||||||
|
gsbi2_i2c: i2c@16180000 {
|
||||||
|
compatible = "qcom,i2c-qup-v1.1.1";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
reg = <0x16180000 0x1000>;
|
||||||
|
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
|
||||||
|
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
|
||||||
|
clock-names = "core", "iface";
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
gsbi3: gsbi@16200000 {
|
||||||
|
compatible = "qcom,gsbi-v1.0.0";
|
||||||
|
cell-index = <3>;
|
||||||
|
reg = <0x16200000 0x100>;
|
||||||
|
clocks = <&gcc GSBI3_H_CLK>;
|
||||||
|
clock-names = "iface";
|
||||||
|
status = "disabled";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges;
|
||||||
|
|
||||||
|
gsbi3_spi: spi@16280000 {
|
||||||
|
compatible = "qcom,spi-qup-v1.1.1";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
reg = <0x16280000 0x1000>;
|
||||||
|
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
spi-max-frequency = <24000000>;
|
||||||
|
|
||||||
|
clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
|
||||||
|
clock-names = "core", "iface";
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
gsbi4: gsbi@16300000 {
|
||||||
|
compatible = "qcom,gsbi-v1.0.0";
|
||||||
|
cell-index = <4>;
|
||||||
|
reg = <0x16300000 0x100>;
|
||||||
|
clocks = <&gcc GSBI4_H_CLK>;
|
||||||
|
clock-names = "iface";
|
||||||
|
status = "disabled";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges;
|
||||||
|
|
||||||
|
syscon-tcsr = <&tcsr>;
|
||||||
|
|
||||||
|
gsbi4_serial: serial@16340000 {
|
||||||
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
||||||
|
reg = <0x16340000 0x1000>,
|
||||||
|
<0x16300000 0x1000>;
|
||||||
|
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
|
||||||
|
clock-names = "core", "iface";
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
gsbi5: gsbi@16400000 {
|
||||||
|
compatible = "qcom,gsbi-v1.0.0";
|
||||||
|
cell-index = <5>;
|
||||||
|
reg = <0x16400000 0x100>;
|
||||||
|
clocks = <&gcc GSBI5_H_CLK>;
|
||||||
|
clock-names = "iface";
|
||||||
|
status = "disabled";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges;
|
||||||
|
|
||||||
|
syscon-tcsr = <&tcsr>;
|
||||||
|
|
||||||
|
gsbi5_i2c: i2c@16480000 {
|
||||||
|
compatible = "qcom,i2c-qup-v1.1.1";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
reg = <0x16480000 0x1000>;
|
||||||
|
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
|
||||||
|
/* QUP clock is not initialized, set rate */
|
||||||
|
assigned-clocks = <&gcc GSBI5_QUP_CLK>;
|
||||||
|
assigned-clock-rates = <24000000>;
|
||||||
|
|
||||||
|
clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
|
||||||
|
clock-names = "core", "iface";
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
|
gsbi5_serial: serial@16440000 {
|
||||||
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
||||||
|
reg = <0x16440000 0x1000>,
|
||||||
|
<0x16400000 0x1000>;
|
||||||
|
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
|
||||||
|
clock-names = "core", "iface";
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
qcom,ssbi@500000 {
|
||||||
|
compatible = "qcom,ssbi";
|
||||||
|
reg = <0x500000 0x1000>;
|
||||||
|
qcom,controller-type = "pmic-arbiter";
|
||||||
|
|
||||||
|
pmicintc: pmic@0 {
|
||||||
|
compatible = "qcom,pm8018", "qcom,pm8921";
|
||||||
|
interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
interrupt-controller;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
pwrkey@1c {
|
||||||
|
compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
|
||||||
|
reg = <0x1c>;
|
||||||
|
interrupt-parent = <&pmicintc>;
|
||||||
|
interrupts = <50 IRQ_TYPE_EDGE_RISING>,
|
||||||
|
<51 IRQ_TYPE_EDGE_RISING>;
|
||||||
|
debounce = <15625>;
|
||||||
|
pull-up;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmicmpp: mpp@50 {
|
||||||
|
compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
|
||||||
|
interrupt-parent = <&pmicintc>;
|
||||||
|
interrupts = <24 IRQ_TYPE_NONE>,
|
||||||
|
<25 IRQ_TYPE_NONE>,
|
||||||
|
<26 IRQ_TYPE_NONE>,
|
||||||
|
<27 IRQ_TYPE_NONE>,
|
||||||
|
<28 IRQ_TYPE_NONE>,
|
||||||
|
<29 IRQ_TYPE_NONE>;
|
||||||
|
reg = <0x50>;
|
||||||
|
gpio-controller;
|
||||||
|
#gpio-cells = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
rtc@11d {
|
||||||
|
compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
|
||||||
|
interrupt-parent = <&pmicintc>;
|
||||||
|
interrupts = <39 IRQ_TYPE_EDGE_RISING>;
|
||||||
|
reg = <0x11d>;
|
||||||
|
allow-set-time;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmicgpio: gpio@150 {
|
||||||
|
compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
|
||||||
|
interrupt-parent = <&pmicintc>;
|
||||||
|
interrupts = <24 IRQ_TYPE_NONE>,
|
||||||
|
<25 IRQ_TYPE_NONE>,
|
||||||
|
<26 IRQ_TYPE_NONE>,
|
||||||
|
<27 IRQ_TYPE_NONE>,
|
||||||
|
<28 IRQ_TYPE_NONE>,
|
||||||
|
<29 IRQ_TYPE_NONE>;
|
||||||
|
gpio-controller;
|
||||||
|
#gpio-cells = <2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
sdcc1bam: dma@12182000{
|
||||||
|
compatible = "qcom,bam-v1.3.0";
|
||||||
|
reg = <0x12182000 0x8000>;
|
||||||
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
clocks = <&gcc SDC1_H_CLK>;
|
||||||
|
clock-names = "bam_clk";
|
||||||
|
#dma-cells = <1>;
|
||||||
|
qcom,ee = <0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
sdcc2bam: dma@12142000{
|
||||||
|
compatible = "qcom,bam-v1.3.0";
|
||||||
|
reg = <0x12142000 0x8000>;
|
||||||
|
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
clocks = <&gcc SDC2_H_CLK>;
|
||||||
|
clock-names = "bam_clk";
|
||||||
|
#dma-cells = <1>;
|
||||||
|
qcom,ee = <0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
amba {
|
||||||
|
compatible = "arm,amba-bus";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
ranges;
|
||||||
|
sdcc1: sdcc@12180000 {
|
||||||
|
status = "disabled";
|
||||||
|
compatible = "arm,pl18x", "arm,primecell";
|
||||||
|
arm,primecell-periphid = <0x00051180>;
|
||||||
|
reg = <0x12180000 0x2000>;
|
||||||
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
interrupt-names = "cmd_irq";
|
||||||
|
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
|
||||||
|
clock-names = "mclk", "apb_pclk";
|
||||||
|
bus-width = <8>;
|
||||||
|
max-frequency = <48000000>;
|
||||||
|
cap-sd-highspeed;
|
||||||
|
cap-mmc-highspeed;
|
||||||
|
vmmc-supply = <&vsdcc_fixed>;
|
||||||
|
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
|
||||||
|
dma-names = "tx", "rx";
|
||||||
|
assigned-clocks = <&gcc SDC1_CLK>;
|
||||||
|
assigned-clock-rates = <400000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
sdcc2: sdcc@12140000 {
|
||||||
|
compatible = "arm,pl18x", "arm,primecell";
|
||||||
|
arm,primecell-periphid = <0x00051180>;
|
||||||
|
status = "disabled";
|
||||||
|
reg = <0x12140000 0x2000>;
|
||||||
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
interrupt-names = "cmd_irq";
|
||||||
|
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
|
||||||
|
clock-names = "mclk", "apb_pclk";
|
||||||
|
bus-width = <4>;
|
||||||
|
cap-sd-highspeed;
|
||||||
|
cap-mmc-highspeed;
|
||||||
|
max-frequency = <48000000>;
|
||||||
|
no-1-8-v;
|
||||||
|
vmmc-supply = <&vsdcc_fixed>;
|
||||||
|
dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
|
||||||
|
dma-names = "tx", "rx";
|
||||||
|
assigned-clocks = <&gcc SDC2_CLK>;
|
||||||
|
assigned-clock-rates = <400000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
tcsr: syscon@1a400000 {
|
||||||
|
compatible = "qcom,tcsr-mdm9615", "syscon";
|
||||||
|
reg = <0x1a400000 0x100>;
|
||||||
|
};
|
||||||
|
|
||||||
|
rpm: rpm@108000 {
|
||||||
|
compatible = "qcom,rpm-mdm9615";
|
||||||
|
reg = <0x108000 0x1000>;
|
||||||
|
|
||||||
|
qcom,ipc = <&l2cc 0x8 2>;
|
||||||
|
|
||||||
|
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
|
||||||
|
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
|
||||||
|
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
|
||||||
|
interrupt-names = "ack", "err", "wakeup";
|
||||||
|
|
||||||
|
regulators {
|
||||||
|
compatible = "qcom,rpm-pm8018-regulators";
|
||||||
|
|
||||||
|
vin_lvs1-supply = <&pm8018_s3>;
|
||||||
|
|
||||||
|
vdd_l7-supply = <&pm8018_s4>;
|
||||||
|
vdd_l8-supply = <&pm8018_s3>;
|
||||||
|
vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
|
||||||
|
|
||||||
|
/* Buck SMPS */
|
||||||
|
pm8018_s1: s1 {
|
||||||
|
regulator-min-microvolt = <500000>;
|
||||||
|
regulator-max-microvolt = <1150000>;
|
||||||
|
qcom,switch-mode-frequency = <1600000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_s2: s2 {
|
||||||
|
regulator-min-microvolt = <1225000>;
|
||||||
|
regulator-max-microvolt = <1300000>;
|
||||||
|
qcom,switch-mode-frequency = <1600000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_s3: s3 {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
qcom,switch-mode-frequency = <1600000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_s4: s4 {
|
||||||
|
regulator-min-microvolt = <2100000>;
|
||||||
|
regulator-max-microvolt = <2200000>;
|
||||||
|
qcom,switch-mode-frequency = <1600000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_s5: s5 {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <1350000>;
|
||||||
|
regulator-max-microvolt = <1350000>;
|
||||||
|
qcom,switch-mode-frequency = <1600000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* PMOS LDO */
|
||||||
|
pm8018_l2: l2 {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l3: l3 {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l4: l4 {
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l5: l5 {
|
||||||
|
regulator-min-microvolt = <2850000>;
|
||||||
|
regulator-max-microvolt = <2850000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l6: l6 {
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <2850000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l7: l7 {
|
||||||
|
regulator-min-microvolt = <1850000>;
|
||||||
|
regulator-max-microvolt = <1900000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l8: l8 {
|
||||||
|
regulator-min-microvolt = <1200000>;
|
||||||
|
regulator-max-microvolt = <1200000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l9: l9 {
|
||||||
|
regulator-min-microvolt = <750000>;
|
||||||
|
regulator-max-microvolt = <1150000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l10: l10 {
|
||||||
|
regulator-min-microvolt = <1050000>;
|
||||||
|
regulator-max-microvolt = <1050000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l11: l11 {
|
||||||
|
regulator-min-microvolt = <1050000>;
|
||||||
|
regulator-max-microvolt = <1050000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l12: l12 {
|
||||||
|
regulator-min-microvolt = <1050000>;
|
||||||
|
regulator-max-microvolt = <1050000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l13: l13 {
|
||||||
|
regulator-min-microvolt = <1850000>;
|
||||||
|
regulator-max-microvolt = <2950000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
pm8018_l14: l14 {
|
||||||
|
regulator-min-microvolt = <2850000>;
|
||||||
|
regulator-max-microvolt = <2850000>;
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Low Voltage Switch */
|
||||||
|
pm8018_lvs1: lvs1 {
|
||||||
|
bias-pull-down;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
Loading…
Reference in New Issue